Roland S-4000 Manual

0 (0)
Roland S-4000 Manual

for Macintosh

User Guide

Roland Corporation and its affiliates assume no responsibility for any loss or damage (loss of profits, loss of data or other economical losses) caused by use of this software. This is applicable even in case users were notified from Roland Corporation and its affiliates about possibility of such losses.

Copyright © 2005 ROLAND CORPORATION

All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.

1

S-4000 RCS User Guide

Contents

1.

Before Use.................................................................................................

3

2.

System Requirements..............................................................................

3

3.

Connections..............................................................................................

3

4.

Starting and Shutting down the application ..........................................

4

 

Starting the application .......................................................................................................

4

 

Shutting down the application.............................................................................................

4

5.

Names and Functions ..............................................................................

5

 

Menu...................................................................................................................................

5

 

S-4000 RCS Window..........................................................................................................

5

 

Scene Window....................................................................................................................

6

6.

Saving all system settings (Scenes).......................................................

7

 

About Scenes .....................................................................................................................

7

 

Saving a Scene...................................................................................................................

7

 

Recalling a Scene...............................................................................................................

8

 

Editing a Scene Name ........................................................................................................

8

7.

Messages ..................................................................................................

8

The contents of this document are written with the assumption that the user has all of the basic knowledge and skills required to operate a Macintosh computer. Please read the owner’s manual of your computer if you have questions regarding basic computer operations.

*Apple and Macintosh are registered trademarks of Apple Computer, Inc.

*Mac OS is a trademark of Apple Computer, Inc.

*All product names mentioned in this document are trademarks or registered trademarks of their respective owners.

2

1. Before Use

The S-4000 RCS software is designed to control RSS S-4000 Digital Audio Snakes using a computer. It can control up to 4 forty-channel S-4000 systems.

*The S-4000 Digital Audio Snake is a Digital Audio Transfer System configured with S-4000S and S-4000H units and is referred to as the “S-4000 system”. Please refer to the owner’s manual of S-4000 for system configuration and operational details.

2.System Requirements

Operating System

Mac OS X 10.3 or later

 

 

CPU

PowerPC G4 1GHz or faster

 

 

RAM

512MB or more

 

 

Display

XGA (1024x768) or higher resolution

 

 

Interface

Serial Interface (RS-232C D-Sub 9pins)

 

Connect the USB/Serial adapter to your computer and carry out the manufacturer’s

 

set up and configuration procedures to ensure that the interface is working properly.

 

Recommendation (as of 12/29/05): USA-49W, USA-19HS or USA-28X of KEYSPAN

 

 

*While under most conditions, a computer similar to the above will permit normal operation of the S-4000 RCS, Roland Corporation and its affiliates cannot guarantee compatibility solely on these factors. This is due to numerous variables that may influence the processing environment, such as differences in motherboard design and the particular combination of other devices involved.

3.Connections

To use the S-4000 RCS software with an S-4000 system, a computer serial interface is required. Refer to the illustration below and connect your computer to either an S-4000S or S-4000H via a USB/Serial adapter (KEYSPAN’s USA-49W, USA-19HS or others).

*A maximum of 4 S-4000 Systems (160 channels of audio) can be connected to one computer.

*Use RS-232C cable contained as accessory of the S-4000 Digital Snake system to connect with USB/Serial adaptor.

If it’s necessary to use longer or shorter cable, please purchase RS-232C cable (D-Sub 9pins/male-female/ straight type). It is recommended to use a cable with 15meters length or shorter.

*Please refer to page 88 of the S-4000 owner’s manual for pin configurations of the RS-232C REMOTE connector on the S-4000S and S-4000H.

 

USB cable

RS-232C cable

 

USB port

USB/Serial adapter

 

 

 

(USA-49W, USA-19HS, etc.)

Female

Male

USA-28X

S-4000S

or

REMOTE connector

S-4000H

*In case you are using a USA-28X, RS-422 (mini DIN 8pins Male)/

RS-232C (D-Sub 9pins Male) conversion cable is required.

3

Loading...
+ 5 hidden pages