Rockford Fosgate FRC3206U, FRC3269, FRC3204T, FRC3205, FRC3204 User Manual

...
0 (0)
Rockford Fosgate FRC3206U, FRC3269, FRC3204T, FRC3205, FRC3204 User Manual

FRC3203

FRC3204

FRC3204T

FRC3205

FRC3206

FRC3206U

FRC3246

FRC3257

FRC3268

FRC3269

FRC3369

Installation &

Operation

Full Range

Speakers

Installation et fonctionnement Instalación y funcionamiento Einbau und Betrieb Installazione e funzionamento

INTRODUCTION

Dear Customer,

Congratulations on your purchase of the world's finest brand of car audio speakers. At Rockford Fosgate we are fanatics about musical reproduction at its best, and we are pleased you chose our product. Through years of engineering expertise, hand craftsmanship and critical testing procedures, we have created a wide range of products that reproduce music with all the clarity and richness you deserve.

For maximum performance we recommend you have your new Rockford Fosgate product installed by an Authorized Rockford Fosgate Dealer, as we provide specialized training through Rockford Technical Training Institute (RTTI). Please read your warranty and retain your receipt and original carton for possible future use.

Great product and competent installations are only a piece of the puzzle when it comes to your system. Make sure that your installer is using 100% authentic installation accessories from Connecting Punch in your installation. Connecting Punch has everything from RCA cables and speaker wire to Power line and battery connectors. Insist on it! After all, your new system deserves nothing but the best.

To add the finishing touch to your new Rockford Fosgate image order your Rockford accessories, which include everything from T-shirts and jackets to hats and sunglasses.

To get a free brochure on Rockford Fosgate products and Rockford accessories, in the U.S. call 480-967-3565 or FAX 480-967-8132.

For all other countries, call +001-480-967-3565 or FAX +001-480-967-8132.

PRACTICE SAFE SOUND™

Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss. High powered auto sound systems may produce sound pressure levels well over 130dB. Use common sense and practice safe sound.

If, after reading your manual, you still have questions regarding this product, we recommend that you see your Rockford Fosgate dealer. If you need further assistance, you can call us direct at 1-800- 669-9899. Be sure to have your serial number, model number and date of purchase available when you call.

The serial number can be found on the outside of the box. Please record it in the space provided below as your permanent record. This will serve as verification of your factory warranty and may become useful in recovering your source unit if it is ever stolen.

Serial Number: _________________________________________

Model Number: ________________________________________

TABLE OF CONTENTS

. . . . . . . . . . . . . . . . . . . . . . .Introduction

. 2

. . . . . . . . . . . . . . . . . . . . .Specifications

5-6

Safety Instructions . . . . . . . . . . . . . . . . . .

. 3

Limited Warranty Information. . . . . . . . .

. . 7

Contents of Carton . . . . . . . . . . . . . . . . . .

. 3

International Instructions . . . . . . . . . . . .

. 10

Installation . . . . . . . . . . . . . . . . . . . . . . .

4-5

 

 

Installation Considerations . . . . . . . . . .

. 4

 

 

Mounting . . . . . . . . . . . . . . . . . . . . . .

. 4

 

 

 

 

 

 

NOTE: Review each section for more detailed information.

2

GETTING STARTED

Welcome to Rockford Fosgate! This manual is designed to provide information for the owner, salesperson and installer. For those of you who want quick information on how to install this product, please turn to the Installation Section of this manual. Other information can be located by using the Table of Contents. We, at Rockford Fosgate, have worked very hard to make sure all the information in this manual is current. But, as we are constantly finding new ways to improve our product, this information is subject to change without notice.

SAFETY INSTRUCTIONS

This symbol with “WARNING” is intended to alert the user to the presence of important instructions. Failure to heed the instructions will result in severe injury or death.

This symbol with “CAUTION” is intended to alert the user to the presence of important instructions. Failure to heed the instructions can result in injury or unit damage.

! CAUTION: To prevent injury and damage to the unit, please read and follow the instructions in this manual. We want you to have enjoyment from this system, not a headache.

! CAUTION If you feel unsure about installing this system yourself, have it installed by a qualified Rockford Fosgate technician.

! CAUTION Before installation, disconnect the battery negative (-) terminal to prevent damage to the unit, fire and/or possible injury.

CONTENTS OF CARTON

One (1) Pair of Full Range Speakers

One (1) Pair of Grilles (FRC3204,

FRC3205, FRC3206, FRC3206U, FRC3269,

and FRC3369 Only)

20' (6.1m) of 18 gauge Speaker Wire

Installation & Operation Manual

Mounting Hardware

Visit our web site for the latest information on all Rockford products.

www.rockfordfosgate.com

3

INSTALLATION

INSTALLATION CONSIDERATIONS

The following is a list of tools needed for installation:

#2 Phillips screwdriver

Wire strippers

Battery post wrench

Wire crimpers

Hand held drill w/assorted bits

Wire cutters

Since some of these Punch High Performance Full Range Speakers are most often used as direct replacements for stock speakers and are shipped without grilles, some of the following instructions will not apply. For custom installations see your Authorized Rockford Fosgate Dealer.

!

CAUTION: If you feel unsure about installing this system yourself, have it installed

by a qualified Rockford Fosgate technician.

! CAUTION: Before installation, disconnect the battery negative (-) terminal to prevent damage to the unit, fire and/or possible injury.

Before beginning any installation, follow these simple rules:

1.Be sure to carefully read and understand the instructions before attempting to install the Unit.

2.For safety, disconnect the negative lead from the battery prior to beginning the installation.

3.For easier assembly, we suggest you run all wires prior to mounting your Unit in place.

4.Use high quality connectors for a reliable installation and to minimize signal or power loss.

5.Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle.

6.Never run wires underneath the vehicle. Running the wires inside the vehicle provides the best protection.

7.Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through metal, especially the firewall.

MOUNTING

1.Determine where the speakers will be mounted. Ensure an area large enough for the speaker to mount evenly. Be sure that the mounting location is deep enough for the speaker to fit; if mounting in a door, operate all functions (windows, locks, etc.) through their entire operating range to ensure there is no obstruction.

2.Refer to the specification chart to determine the proper diameter hole to cut for your speaker model.

3.Using the plastic mounting ring as a template, mark the locations for the mounting screws. Drill the holes with a 1/8" bit.

4.Feed the speaker wires through the cutout and the plastic mounting ring (from the flat side) and connect to the speaker terminals. Be sure to observe proper polarity when connecting the wires. The speaker's positive terminal is indicated with a "+".

5.Fit the ring and speaker to the cutout. Mount them using the enclosed screws. Fit the grille inside the ring and press gently, but firmly, into place.

4

INSTALLATION

Mounting Hole,

Grille

Cut-Out

Mounting Ring

 

 

Mounting

 

Ring

 

Rear Deck

 

Cut-Out

Speaker

Gasket

 

Grille

 

Example of standard

Speaker

door installation

Example of 6" x 9" rear-deck installation

SPECIFICATIONS

FEATURES - All Models

Cone (polypropylene)

• Tweeter (polyethermide)

Surround (foam)

 

Model

FRC3203

FRC3204

FRC3204T

FRC3205

Nominal Diameter (inch)

3

4

4

5

Nominal Diameter (mm)

76

101.6

101.6

127

Description

2-way

2-way

2-way

2-way

Nominal Impedance (ohms)

4Ω

4Ω

4Ω

4Ω

Frequency Response

80Hz-22kHz

55Hz-22kHz

55Hz-22kHz

40Hz-22kHz

Sensitivity (SPL@1w/1m)

89dB

85dB

85dB

81dB

Power Handling

 

 

 

 

(Watts RMS/Peak)

15/30

30/60

30/60

40/80

Installation

 

 

 

 

Speaker Grilles

X

X

Mounting Diameter (inch)

3-1/2

3-21/32

3-21/32

4-1/2

Mounting Diameter (mm)

89

93

93

114

Mounting Depth (inch)

1-5/8

1-5/8

1-27/32

2-1/8

Mounting Depth (mm)

41

41

47

54

5

SPECIFICATIONS

Model

FRC3206

FRC3206U

FRC3246

FRC3257

Nominal Diameter (inch)

6.5

6

4 x

6

5 x 7

Nominal Diameter (mm)

165.1

152.4

101.6 x

152.4

127 x 177.8

Description

2-way

2-way

2-way

2-way

Nominal Impedance (ohms)

4Ω

4Ω

4Ω

4Ω

Frequency Response

35Hz-22kHz

40Hz-22kHz

60Hz-22kHz

40Hz-22kHz

Sensitivity (SPL@1w/1m)

89dB

88dB

85dB

89dB

Power Handling

 

 

 

 

 

(Watts RMS/Peak)

50/100

50/100

30/60

60/120

Installation

 

 

 

 

 

Speaker Grilles

X

X

 

Mounting Diameter (inch)

5-21/32

5-1/16

4-3/32 x

6-3/16

5 x 7-1/8

Mounting Diameter (mm)

144

129

104 x

157

127 x 181

Mounting Depth (inch)

2-9/16

1-27/32

1-15/16

2-7/16

Mounting Depth (mm)

65

47

49

 

62

Model

FRC3268

FRC3269

FRC3369

Nominal Diameter (inch)

6 x

8

6 x

9

6 x

9

Nominal Diameter (mm)

152.4 x

203.2

152.4 x

228.6

152.4 x

228.6

Description

2-way

2-way

3-way

Nominal Impedance(ohms)

4Ω

4Ω

4Ω

Frequency Response

40Hz-22kHz

35Hz-22kHz

30Hz-22kHz

Sensitivity (SPL@1w/1m)

89dB

89dB

91dB

Power Handling

 

 

 

 

 

 

(Watts RMS/Peak)

60/120

75/150

75/150

Installation

 

 

 

 

 

 

Speaker Grilles

 

X

 

X

 

Mounting Diameter (inch)

5-3/16 x

7-7/16

6-5/32 x

8-9/16

6-5/32 x

8-9/16

Mounting Diameter (mm)

132 x

189

156 x

218

156 x

218

Mounting Depth (inch)

2-1/2

3

 

3

 

Mounting Depth (mm)

63.5

76.2

76.2

Specifications subject to change without notice

6

LIMITED WARRANTY INFORMATION

Rockford Corporation offers a limited warranty on Rockford Fosgate products on the following terms:

Length of Warranty

 

PUNCH Amplifiers – 2 years

All Other Amplifier Models – 3 years

Source Units – 1 year

Speakers – 1 year

90 days on speaker, amplifier and source unit B-stock (receipt required)

What is Covered

This warranty applies only to Rockford Fosgate products sold to consumers by Authorized Rockford Fosgate Dealers in the United States of America or its possessions. Product purchased by consumers from an Authorized Rockford Fosgate Dealer in another country are covered only by that country’s Distributor and not by Rockford Corporation.

Who is Covered

This warranty covers only the original purchaser of Rockford product purchased from an Authorized Rockford Fosgate Dealer in the United States. In order to receive service, the purchaser must provide Rockford with a copy of the receipt stating the customer name, dealer name, product purchased and date of purchase.

Products found to be defective during the warranty period will be repaired or replaced (with a product deemed to be equivalent) at Rockford's discretion.

What is Not Covered

1.Damage caused by accident, abuse, improper operations, water, theft

2.Any cost or expense related to the removal or reinstallation of product

3.Service performed by anyone other than Rockford or an Authorized Rockford Fosgate Service Center

4.Any product which has had the serial number defaced, altered, or removed

5.Subsequent damage to other components

6.Any product purchased outside the U.S.

7.Any product not purchased from an Authorized Rockford Fosgate Dealer

Limit on Implied Warranties

Any implied warranties including warranties of fitness for use and merchantability are limited in duration to the period of the express warranty set forth above. Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for Rockford Fosgate any other liability in connection with the sale of the product.

How to Obtain Service

Please call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.

Ship to: Electronics

Ship to: Speakers

Rockford Corporation

Rockford Acoustic Design

Warranty Repair Department

Speaker Returns

2055 E. 5th Street

2356 Turner Ave. NW

Tempe, AZ 85281

Grand Rapids, MI 49544

RA#: _________________________

RA#: ____________________

7

Français

INTRODUCTION

Cher client,

Toutes nos félicitations pour avoir acheté la meilleure marque de haut-parleurs pour automobile. Chez Rockford Fosgate nous sommes des mordus de la reproduction musicale à son meilleur. C’est pourquoi nous sommes heureux que vous ayez choisi notre produit. Des années d’expertise en ingénierie, de savoir-faire et d’essais poussés nous ont permis de créer une vaste gamme de produits capables de reproduire toute la clarté et la richesse musicales que vous méritez.

Pour obtenir les meilleurs résultats, nous vous recommandons de faire installer votre nouvel appareil par un concessionnaire Rockford Fosgate agréé formé spécialement par notre Institut de formation technique Rockford (RTTI). Prenez soin de lire la garantie et conservez votre reçu ainsi que l’emballage d'origine pour usage ultérieur.

Pour monter un excellent système, il ne suffit pas de posséder un super produit et d’assurer une installation qualifiéecompétente. Vous devez veiller à ce que votre installateur utilise des accessoires d’origine fournis par Connecting Punch. Connecting Punch a tout ce qu’il vous faut, des câbles RCA aux câbles de haut-parleurs, en passant par les câbles d’alimentation et les connecteurs de batterie. Insistez pour les avoir! Après tout, votre nouveau système ne mérite rien de moins.

Pour compléter votre nouvelle image Rockford Fosgate, commandez des accessoires Rockford tels que T-shirts, vestes, chapeaux et lunettes de soleil.

Pour obtenir une brochure gratuite sur les produits Rockford Fosgate et les accessoires Rockford, appelez aux États-Unis le 480-967-3565 ou faxez au 480-967-8132.

Pour tous les autres pays, appelez le +001-480-967-3565 ou faxez au +001-480-967-8132.

PRATIQUEZ UNE ÉCOUTE SANS RISQUESMD

Une exposition continue à des niveaux de pression acoustique supérieurs à 100 dB peut causer une perte d'acuité auditive permanente. Les systèmes audio de forte puissance pour auto peuvent produire des niveaux de pression acoustique bien audelà de 130 dB. Faites preuve de bon sens et pratiquez une écoute sans risques

Si vous avez encore des questions à propos de ce produit, même après avoir lu ce manuel, contactez votre concessionnaire Rockford Fosgate agréé. Si vous avez besoin d'aide, appelez-nous au 1-800-669-9899. Veuillez avoir les numéros de modèle et de série, ainsi que la date d'achat de l'appareil à portée de main lorsque vous appelez.

Le numéro de série est indiqué sur l’extérieur de l’emballage. Veuillez l’inscrire ci-dessous dans l'espace réservé à cet effet. Il permettra de vérifier votre garantie et de retrouver votre appareil en cas de vol.

Numéro de série :_______________________________________

Numéro de modèle : ____________________________________

TABLE DES MATIÈRES

Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 Consignes de sécurité . . . . . . . . . . . . . . . . . 3 Contenu de l'emballage . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . . . . . . . . . . . . . . . 4-5

Considérations concernant l'installation . 4 Montage . . . . . . . . . . . . . . . . . . . . . . . . 4

Spécifications . . . . . . . . . . . . . . . . . . . . . . . 6 Garantie limitée . . . . . . . . . . . . . . . . . . . . . 7

NOTE : consultez chaque section pour de plus amples informations.

2

AVANT DE COMMENCER

Bienvenue à Rockford Fosgate ! Ce manuel vise à informer le propriétaire, le vendeur et l’installateur de l’appareil. Si vous désirez apprendre rapidement comment installer ce produit, consultez la section Installation du manuel. Reportez-vous à la Table des matières pour d’autres informations. Nous nous efforçons de faire en sorte que toutes les informations contenues dans ce manuel soient à jour. Mais comme nous améliorons constamment nos produits, nous nous réservons le droit de modifier ces informations sans aucun préavis.

CONSIGNES DE SÉCURITÉ

Le symbole accompagnant le mot « AVERTISSEMENT » signale à l'utilisateur la présence d’instructions importantes. Le non-respect de ces instructions causera des blessures graves ou la mort.

Le symbole accompagnant l’expression « MISE EN GARDE » signale à l'utilisateur la présence d’instructions importantes. Le non-respect de ces instructions peut causer des blessures ou endommager l’appareil.

! MISE EN GARDE : pour éviter des blessures et ne pas endommager l'appareil, veuillez lire et suivre les instructions du manuel. Notre but est que ce système vous donne du plaisir et non des maux de tête.

! MISE EN GARDE : si vous vous sentez incapable d’installer l’appareil vous-même, confiez la tâche à un technicien Rockford Fosgate qualifié.

! MISE EN GARDE : avant d'entamer l'installation, déconnectez la broche négative (-) de la batterie pour éviter tout risque de blessures, d’incendie ou de dommages à l'appareil.

CONTENU DE L'EMBALLAGE

Une (1) paire de haut-parleurs pleine gamme

Une (1) paire de grilles (FRC3204, FRC3205, FRC3206, FRC3206U, FRC3269 et FRC3369 seulement)

Câble de haut-parleur de 6,1 m (20 pi), calibre 18

Manuel d'installation et d'utilisation

Matériel de montage

Visitez notre site Web pour obtenir les dernières informations sur tous les produits Rockford.

www.rockfordfosgate.com

3

Français

INSTALLATION

CONSIDÉRATIONS CONCERNANT L’INSTALLATION

Voici la liste d’outils requis pour l’installation :

Tournevis à embout cruciforme no 2

Pince à dénuder

Clé de borne de batterie

Pince à sertir

Perceuse à main avec mèches assorties

Coupe-fils

Certaines des instructions suivantes peuvent ne pas s'appliquer étant donné que certains des hautparleurs pleine gamme de haute performance Punch sont souvent utilisés en remplacement de hautparleurs ordinaires et sont livrés sans grilles. Pour toute installation sur mesure, consultez votre distributeur agréé Rockford Fosgate.

! MISE EN GARDE : si vous vous sentez incapable d’installer l’appareil vous-même, confiez la tâche à un technicien qualifié.

! MISE EN GARDE : avant d'entamer l'installation, déconnectez la broche négative (-) de la batterie pour éviter tout risque de blessures, d’incendie ou de dommages à l'appareil.

Avant de commencer l’installation, suivez ces règles toutes simples :

1.Prenez soin de bien lire et comprendre les instructions avant d’installer l’appareil.

2.Par mesure de sécurité, veuillez débrancher le fil négatif de la batterie avant de commencer l’installation.

3.Pour faciliter le montage, nous vous suggérons de dérouler tous les câbles avant d'installer l'appareil.

4.Utilisez des connecteurs de haute qualité pour assurer une installation fiable et minimiser la perte de signal ou de puissance.

5.Réfléchissez avant de percer quoique ce soit ! Faites attention de ne pas couper ou percer le réservoir d’essence, les conduites de carburant, de frein, hydrauliques ou de dépression, ou le câblage électrique lorsque vous travaillez sur un véhicule.

6.Ne faites jamais passer les fils sous le véhicule. Il vaut mieux les installer à l’intérieur du véhicule pour assurer une meilleure protection.

7.Évitez de faire passer les fils par dessus ou à travers des bords tranchants. Tout fil acheminé à travers du métal, un pare-feu en particulier, doit être protégé avec des bagues en caoutchouc ou plastique.

MONTAGE

1.Déterminez l'emplacement des haut-parleurs. Prévoyez un espace suffisamment grand pour assurer un montage égal des haut-parleurs. Assurez-vous que l'emplacement est assez profond pour les haut-parleurs; s'il s'agit d'une porte, actionnez complètement toutes les fonctions (fenêtres, verrous, etc.) pour vous assurer qu'il n'y pas d'obstruction.

2.Reportez-vous au tableau des spécifications pour déterminer le diamètre approprié à découper pour votre modèle de haut-parleur.

3.Servez-vous de l'anneau de montage en plastique comme modèle et marquez l'emplacement des vis de montage. Percez les trous à l'aide d'une mèche de 1/8 po.

4.Faites passer les câbles de haut-parleur à travers la découpe et l'anneau de montage en plastique (du côté plat) et connectez-les aux bornes du haut-parleur. Prenez soin de respecter la polarité. La borne positive du haut-parleur est indiquée par un « + ».

5.Ajustez l'anneau et le haut-parleur en fonction de la découpe. Fixez-les à l'aide des vis fournies. Placez la grille à l'intérieur de l'anneau en appuyant doucement mais fermement.

4

Loading...
+ 22 hidden pages