Ricoh R1162D151B, R1162D151D, R1162D161B, R1162D161D, R1162D171B Schematic [ru]

...
0 (0)

R1162x SERIES

3-MODE 150mA LDO REGULATOR

NO.EA-110-0512

OUTLINE

The R1162x Series consist of CMOS-based voltage regulator ICs with high output voltage accuracy and low supply current. Each of these voltage regulator ICs consists of a voltage reference unit, an error amplifier, resistors for setting output voltage, a current limit circuit, and so on. The output voltage is internally fixed with high accuracy.

These ICs perform with the chip enable function and realize a standby mode with ultra low supply current. To prevent the destruction by over current, the current limit circuit is included. The R1162x Series have 3-mode. One is standby mode with CE or standby control pin. Other two modes are realized with ECO pin™. Fast Transient Mode (FT mode) and Low Power Mode (LP mode) are alternative with ECO pin™. Consumption current is reduced at Low Power Mode compared with Fast Transient Mode. The output voltage is maintained between FT mode and LP mode.

Since the packages for these ICs are SOT-23-5 and SON1612-6 packages, high density mounting of the ICs on boards is possible.

FEATURES

• Ultra-Low Supply Current..................................

Typ. 5.5µA (Low Power Mode),

 

 

Typ. 70µA (Fast Transient Mode)

• Standby Mode ...................................................

Typ. 0.1µA

• Low Dropout Voltage.........................................

Typ. 0.25V (IOUT=150mA Output Voltage=3.0V Type)

• High Ripple Rejection .......................................

Typ. 70dB (f=1kHz, FT Mode)

 

 

Typ. 60dB (f=10kHz, FT Mode)

Low Temperature-Drift Coefficient of Output Voltage Typ. ±100ppm/°C

Excellent Line Regulation .................................

Typ. 0.02%/V

• High Output Voltage Accuracy ..........................

±2.0%(±3.0% at LP Mode)

Small Package ................................................

SOT-23-5 (Super Mini-mold), SON1612-6

Output Voltage ..................................................

Stepwise setting with a step of 0.1V

 

 

in the range of 1.5V to 4.0V is possible

Built-in fold-back protection circuit ....................

Typ. 40mA (Current at short mode)

• Performs with Ceramic Capacitors ...................

CIN=1.0µF,COUT=0.47µF

APPLICATIONS

Precision Voltage References.

Power source for electrical appliances such as cameras, VCRs and hand-held communication equipment.

Power source for battery-powered equipment.

1

R1162x

BLOCK DIAGRAM

 

 

R1162xxx1B

 

 

 

 

R1162xxx1D

 

 

 

 

 

 

ECO

 

 

 

 

 

 

 

ECO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VDD

Vref

Current Limit

CE

VOUT VDD

GND CE

VOUT

Vref

Current Limit

GND

SELECTION GUIDE

The output voltage, function of auto-discharge, package, and the packing type for the ICs can be selected at the user's request. The selection can be available by designating the part number as shown below;

R1162xxx1x-xx ←Part Number

 

 

 

 

 

↑ ↑

a b

c

d

 

 

 

 

Code

 

 

Contents

a

 

Designation of Package Type :

 

N:SOT-23-5 (Mini-mold) D:SON1612-6

 

 

 

 

 

 

Setting Output Voltage (VOUT) :

b

 

Stepwise setting with a step of 0.1V in the range of 1.5V to 4.0V is possible.

 

 

 

Exceptions: 1.85V=R1162x181x5, 2.85V=R1162x281x5

c

 

Designation of Chip Enable Option :

 

B: "H" active type.

 

 

 

D: "H" active type. With auto discharge function

d

 

Designation of Taping Type :

 

Refer to Taping Specifications;TR type is the standard direction.

 

 

 

2

R1162x

PIN CONFIGURATIONS

SOT-23-5

5

4

(mark side)

1 2 3

 

SON1612-6

6

5

4

1

2

3

PIN DESCRIPTIONS

R1116N (SOT-23-5)

Pin No.

Symbol

Description

 

 

 

1

VDD

Input Pin

 

 

 

2

GND

Ground Pin

 

 

 

3

CE

Chip Enable Pin

 

 

 

4

ECO

MODE alternative pin

 

 

 

5

VOUT

Output pin

 

 

 

R1116D (SON1612-6)

Pin No.

Symbol

Description

 

 

 

1

CE

Chip Enable Pin

 

 

 

2

GND

Ground Pin

 

 

 

3

VDD

Input Pin

 

 

 

4

VOUT

Output Pin

 

 

 

5

GND

Ground Pin

 

 

 

6

ECO

MODE alternative pin

 

 

 

ABSOLUTE MAXIMUM RATINGS

Symbol

 

 

Item

Rating

Unit

 

 

 

 

 

 

VIN

Input Voltage

6.5

V

 

 

 

 

 

 

VECO

Input Voltage (ECO Pin)

−0.3 to 6.5

V

 

 

 

 

 

 

VCE

Input Voltage (

 

/ CE Pin)

−0.3 to 6.5

V

CE

VOUT

Output Voltage

−0.3 to VIN+0.3

V

 

 

 

 

IOUT

Output Current

180

mA

 

 

 

 

PD

Power Dissipation (SOT-23-5) 1

420

mW

Power Dissipation (SON1612-6) 1

500

MW

 

Topt

Operating Temperature Range

−40 ~ 85

°C

Tstg

Storage Temperature Range

−55 ~ 125

°C

1 For Power Dissipation, please refer to PACKAGE INFORMATION to be described.

3

R1162x

ELECTRICAL CHARACTERISTICS

R1162xxx1B/D

 

 

 

 

 

 

 

 

Topt=25°C

 

 

 

 

 

 

 

 

 

 

Symbol

Item

 

 

Conditions

Min.

Typ.

Max.

 

Unit

 

 

VIN = Set VOUT+1V VECO = VIN

VOUT

 

VOUT

 

V

 

 

<

<

 

Note 1

×0.98

 

×1.02

 

VOUT

Output Voltage

1mA =

IOUT = 30mA

 

 

 

 

VIN = Set VOUT + 1V VECO =GND

VOUT

 

VOUT

 

V

 

 

 

 

 

 

<

<

 

Note 2

×0.97

 

×1.03

 

 

 

1mA =

IOUT = 30mA

 

 

 

 

 

Output Voltage Deviation

VIN = Set VOUT+1V, IOUT =30mA

−1.2

0.0

1.2

 

%

∆VOUT

between FT Mode and LP

<

2.0V

 

 

 

VOUT =

 

 

 

 

 

 

 

 

Mode

>

2.0V

 

 

(−24)

0.0

(24)

 

mV

 

 

VOUT =

 

 

 

IOUT

Output Current

VIN − VOUT = 1.0V

 

 

150

 

 

 

mA

 

Load Regulation(FT Mode)

VIN =Set VOUT+1V, VECO=VIN

 

20

40

 

mV

∆VOUT/

<

 

<

 

 

 

 

 

1mA =

IOUT = 150mA

 

 

 

 

 

 

∆IOUT

Load Regulation(LP Mode)

VIN = Set VOUT+1V,VECO=GND

 

20

45

 

mV

 

<

 

<

 

 

 

 

 

 

1mA =

IOUT = 150mA

 

 

 

 

 

 

VDIF

Dropout Voltage

Refer to the ELECTRICAL CHARACTERISTICS by OUTPUT VOLTAGE

ISS1

Supply Current(FT Mode)

VIN = Set VOUT+1V

 

 

 

70

100

 

µA

VECO = VIN, IOUT=0mA

 

 

 

 

 

 

 

 

 

 

 

 

 

ISS2

Supply Current(LP Mode)

VIN = Set VOUT+1V

 

 

 

5.5

9.0

 

µA

VECO = GND, IOUT=0mA

 

 

 

 

 

 

 

 

 

Istandby

Supply Current (Standby)

VIN = VCE = Set VOUT+1V

 

0.1

1.0

 

µA

 

 

Set VOUT+0.5V = VIN = 6.0V

 

 

 

 

 

 

 

 

 

<

<

 

 

 

 

 

∆VOUT/

Line Regulation(FT Mode)

IOUT = 30mA, VECO = VIN

 

0.02

0.10

 

%/V

 

VOUT =

1.6V: 2.2V =

VIN = 6.0V

 

 

 

 

 

 

 

<

 

<

 

<

 

 

 

 

 

∆VIN

 

 

 

 

 

 

 

 

Set VOUT + 0.5V = VIN = 6.0V

 

 

 

 

 

 

 

 

 

<

 

<

 

 

 

 

 

 

Line Regulation(LP Mode)

IOUT = 30mA, VECO = GND

 

0.05

0.20

 

%/V

 

 

VOUT =

1.6V: 2.2V =

VIN = 6.0V

 

 

 

 

 

 

 

<

 

<

 

<

 

 

 

 

 

 

 

f = 1kHz

 

 

 

 

70

 

 

 

RR

Ripple Rejection(FT Mode)

f = 10kHz,Ripple 0.2Vp-p

 

60

 

 

dB

 

 

VIN = Set VOUT + 1V

 

 

 

 

 

 

 

 

 

IOUT = 30mA, VECO = VIN

 

 

 

 

 

VIN

Input Voltage

 

 

 

 

 

2.0

 

6.0

 

V

∆VOUT/

Output Voltage

IOUT = 30mA

 

 

 

±100

 

 

ppm

∆Topt

Temperature Coefficient

−40°C

<

<

 

 

 

 

 

/°C

=

Topt = 85°C

 

 

 

 

Ilim

Short Current Limit

VOUT = 0V

 

 

 

40

 

 

mA

IPD

CE Pull-down

 

 

 

 

 

 

0.3

0.6

 

µA

Constant Current

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RPD

ECO Pull-down Resistance

 

 

 

 

 

2

5

30

 

MΩ

VCEH

CE, ECO Input Voltage “H”

 

 

 

 

 

1.0

 

6.0

 

V

VCEL

CE, ECO Input Voltage “L”

 

 

 

 

 

0.00

 

0.35

 

V

en

Output Noise (Fast Mode)

BW = 10Hz to 100kHz

 

30

 

 

µVrms

en

Output Noise

BW = 10Hz to 100kHz

 

40

 

 

µVrms

(Low Power Mode)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Nch On resistance for

 

 

 

 

 

 

 

 

 

 

RLOW

auto-discharge

VCE=0V

 

 

 

 

60

 

 

 

(Applied to D version)

 

 

 

 

 

 

 

 

 

 

4

R1162x

ELECTRICAL CHARACTERISTICS by OUTPUT VOLTAGE

 

 

 

 

 

 

 

Topt = 25°C

Output Voltage

 

 

Dropout Voltage (mV)

 

 

 

VDIF(ECO=H)

 

VDIF(ECO=L)

VOUT (V)

Condition

 

Typ.

 

Max.

 

Typ.

Max.

 

 

 

 

1.5 =< VOUT =< 1.6

 

400

 

680

 

420

680

1.6 =< VOUT =< 1.7

 

380

 

550

 

390

550

1.7 =< VOUT =< 1.8

IOUT = 150mA

350

 

520

 

370

520

1.8 =< VOUT =< 2.0

340

 

490

 

350

490

 

 

 

2.0 =< VOUT =< 2.8

 

290

 

425

 

300

430

2.8 =< VOUT =< 4.0

 

250

 

350

 

250

350

TYPICAL APPLICATION

IN

VDD

OUT

 

OUT

C1

R1162x

 

SERIES

C2

 

 

GND

 

CE CE

ECO

(External Components)

C2 Ceramic 0.47µF Ex. Murata GRM40B474K

Kyocera CM105B474K

C1 Ceramic 1.0µF

5

R1162x

TYPICAL CHARACTERISTICS Unless otherwise provided, capacitors are ceramic type.

1) Output Voltage vs. Output Current

R1162x15x (ECO=H)

 

1.6

 

 

 

 

OUTH(V)

1.4

 

 

 

 

1.2

 

VIN=2V

 

 

 

 

 

 

 

V

1.0

 

 

VIN=2.5V 3.5V

H

 

 

Voltage

0.8

 

 

 

 

0.6

 

 

 

 

 

 

 

 

 

Output

0.4

 

 

 

 

0.2

 

 

 

 

 

0.0

 

 

 

 

 

0

100

200

300

400

 

 

Output Current IOUT(mA)

 

R1162x15x (ECO=L)

 

1.6

 

 

 

 

OUTL(V)

1.4

 

 

 

 

1.2

 

VIN=2V

 

 

 

 

 

 

 

L V

1.0

 

 

VIN=2.5V 3.5V

Voltage

0.8

 

 

 

 

0.6

 

 

 

 

 

 

 

 

 

Output

0.4

 

 

 

 

0.2

 

 

 

 

 

0.0

 

 

 

 

 

0

100

200

300

400

 

 

Output Current IOUT(mA)

 

R1162x28x (ECO=H)

 

3.0

 

 

 

 

OUTH(V)

2.5

VIN=3.1V

 

 

2.0

VIN=3.3V

 

 

 

H V

 

 

VIN=3.8V 4.8V

 

 

 

Voltage

1.5

 

 

 

 

1.0

 

 

 

 

Output

0.5

 

 

 

 

 

 

 

 

 

 

0.0

 

 

 

 

 

0

100

200

300

400

 

 

Output Current IOUT(mA)

 

R1162x28x (ECO=L)

 

3.0

 

 

 

 

OUTL(V)

2.5

VIN=3.1V

 

 

2.0

VIN=3.3V

 

 

 

L V

 

 

VIN=3.8V 4.8V

 

 

 

Voltage

1.5

 

 

 

 

1.0

 

 

 

 

Output

 

 

 

 

0.5

 

 

 

 

 

 

 

 

 

 

0.0

 

 

 

 

 

0

100

200

300

400

 

 

Output Current IOUT(mA)

 

R1162x40x (ECO=H)

 

4.5

 

 

 

 

OUTH(V)

4.0

VIN=4.3V

 

 

3.5

 

 

VIN=4.5V

 

 

 

3.0

 

 

 

H V

 

 

VIN=5.0V 6.0V

2.5

 

 

Voltage

 

 

 

 

2.0

 

 

 

 

1.5

 

 

 

 

Output

1.0

 

 

 

 

0.5

 

 

 

 

 

0.0

 

 

 

 

 

0

100

200

300

400

 

 

Output Current IOUT(mA)

 

R1162x40x (ECO=L)

 

4.5

 

 

 

 

OUTL(V)

4.0

VIN=4.3V

 

 

3.5

 

 

VIN=4.5V

 

 

 

3.0

 

 

 

L V

 

 

VIN=5.0V 6.0V

2.5

 

 

Voltage

 

 

 

 

2.0

 

 

 

 

1.5

 

 

 

 

Output

 

 

 

 

1.0

 

 

 

 

0.5

 

 

 

 

 

0.0

 

 

 

 

 

0

100

200

300

400

 

 

Output Current IOUT(mA)

 

6

R1162x

2) Output Voltage vs. Input Voltage

R1162x15x (ECO=H)

H(V)OUT

1.6

 

 

 

 

 

 

1.4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.2

 

 

 

 

 

 

V

1.0

 

 

 

 

 

 

H

 

 

 

 

 

 

 

 

 

 

 

 

 

Voltage

0.8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0.6

 

 

 

 

 

 

Output

0.4

 

 

 

IOUT=1mA

 

0.2

 

 

 

IOUT=30mA

 

 

0.0

 

 

 

IOUT=50mA

 

 

 

 

 

 

 

 

 

0

1

2

3

4

5

6

 

 

 

Input Voltage VIN(V)

 

 

R1162x28x (ECO=H)

 

3.0

 

 

 

 

 

 

VOUTH(V)

2.5

 

 

 

 

 

 

2.0

 

 

 

 

 

 

H

 

 

 

 

 

 

 

Voltage

1.5

 

 

 

 

 

 

1.0

 

 

 

 

 

 

Output

0.5

 

 

 

IOUT=1mA

 

 

 

 

IOUT=30mA

 

 

 

 

 

IOUT=50mA

 

 

0.0

 

 

 

 

 

 

 

 

 

 

 

 

0

1

2

3

4

5

6

 

 

 

Input Voltage VIN(V)

 

 

R1162x40x (ECO=H)

 

4.5

 

 

 

 

 

 

VOUTH(V)

4.0

 

 

 

 

 

 

3.5

 

 

 

 

 

 

3.0

 

 

 

 

 

 

H

2.5

 

 

 

 

 

 

Voltage

 

 

 

 

 

 

2.0

 

 

 

 

 

 

1.5

 

 

 

 

 

 

Output

1.0

 

 

 

IOUT=1mA

 

0.5

 

 

 

IOUT=30mA

 

 

 

 

IOUT=50mA

 

 

0.0

 

 

 

 

 

 

 

 

 

 

 

 

0

1

2

3

4

5

6

 

 

 

Input Voltage VIN(V)

 

 

R1162x15x (ECO=L)

 

1.6

 

 

 

 

 

 

OUTL(V)

1.4

 

 

 

 

 

 

1.2

 

 

 

 

 

 

 

 

 

 

 

 

 

L V

1.0

 

 

 

 

 

 

Voltage

0.8

 

 

 

 

 

 

0.6

 

 

 

 

 

 

 

 

 

 

 

 

 

Output

0.4

 

 

 

IOUT=1mA

 

0.2

 

 

 

IOUT=30mA

 

 

0.0

 

 

 

IOUT=50mA

 

 

 

 

 

 

 

 

 

0

1

2

3

4

5

6

 

 

 

Input Voltage VIN(V)

 

 

R1162x28x (ECO=L)

 

3.0

 

 

 

 

 

 

VOUTL(V)

2.5

 

 

 

 

 

 

2.0

 

 

 

 

 

 

L

 

 

 

 

 

 

 

Voltage

1.5

 

 

 

 

 

 

1.0

 

 

 

 

 

 

Output

 

 

 

IOUT=1mA

 

0.5

 

 

 

 

 

 

 

IOUT=30mA

 

 

 

 

 

IOUT=50mA

 

 

0.0

 

 

 

 

 

 

 

 

 

 

 

 

0

1

2

3

4

5

6

 

 

 

Input Voltage VIN(V)

 

 

 

 

R1162x40x (ECO=L)

 

 

 

4.5

 

 

 

 

 

 

VOUTL(V)

4.0

 

 

 

 

 

 

3.0

 

 

 

 

 

 

 

3.5

 

 

 

 

 

 

L

2.5

 

 

 

 

 

 

Voltage

 

 

 

 

 

 

2.0

 

 

 

 

 

 

 

 

 

 

 

 

 

Output

1.5

 

 

 

IOUT=1mA

 

0.5

 

 

 

 

 

1.0

 

 

 

 

 

 

 

 

 

IOUT=30mA

 

 

0.0

 

 

 

IOUT=50mA

 

 

 

 

 

 

 

 

 

0

1

2

3

4

5

6

 

 

 

Input Voltage VIN(V)

 

 

7

Ricoh R1162D151B, R1162D151D, R1162D161B, R1162D161D, R1162D171B Schematic

R1162x

3) Supply Current vs. Input Voltage

R1162x15x (ECO=H)

 

80

 

 

 

 

 

 

A)

70

 

 

 

 

 

 

H(

60

 

 

 

 

 

 

H ISS

50

 

 

 

 

 

 

Current

40

 

 

 

 

 

 

30

 

 

 

 

 

 

 

 

 

 

 

 

 

Supply

20

 

 

 

 

 

 

10

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

0

1

2

3

4

5

6

 

 

 

Input Voltage VIN(V)

 

 

R1162x28x (ECO=H)

 

80

 

 

 

 

 

 

A)

70

 

 

 

 

 

 

 

60

 

 

 

 

 

 

SSH(

 

 

 

 

 

 

 

 

 

 

 

 

 

H I

50

 

 

 

 

 

 

Current

40

 

 

 

 

 

 

30

 

 

 

 

 

 

 

 

 

 

 

 

 

Supply

20

 

 

 

 

 

 

10

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

0

1

2

3

4

5

6

 

 

 

Input Voltage VIN(V)

 

 

R1162x40x (ECO=H)

 

80

 

 

 

 

 

 

A)

70

 

 

 

 

 

 

 

60

 

 

 

 

 

 

SSH(

 

 

 

 

 

 

 

 

 

 

 

 

 

H I

50

 

 

 

 

 

 

Current

40

 

 

 

 

 

 

30

 

 

 

 

 

 

 

 

 

 

 

 

 

Supply

20

 

 

 

 

 

 

10

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

0

1

2

3

4

5

6

 

 

 

Input Voltage VIN(V)

 

 

R1162x15x (ECO=L)

 

7

 

 

 

 

 

 

A)

6

 

 

 

 

 

 

SSL(

5

 

 

 

 

 

 

L I

4

 

 

 

 

 

 

Current

 

 

 

 

 

 

3

 

 

 

 

 

 

2

 

 

 

 

 

 

Supply

 

 

 

 

 

 

1

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

0

1

2

3

4

5

6

 

 

 

Input Voltage VIN(V)

 

 

R1162x28x (ECO=L)

 

11

 

 

 

 

 

 

A)

10

 

 

 

 

 

 

9

 

 

 

 

 

 

SSL(

8

 

 

 

 

 

 

 

 

 

 

 

 

 

L I

7

 

 

 

 

 

 

Current

6

 

 

 

 

 

 

5

 

 

 

 

 

 

4

 

 

 

 

 

 

Supply

3

 

 

 

 

 

 

2

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

0

1

2

3

4

5

6

 

 

 

Input Voltage VIN(V)

 

 

R1162x40x (ECO=L)

 

12

A)

11

10

ISSL(

9

8

L

7

Current

6

 

 

5

Supply

4

3

 

2

1

0

0

1

2

3

4

5

6

 

 

Input Voltage VIN(V)

 

 

8

R1162x

4) Output Voltage vs. Temperature

R1162x15x (ECO=H)

 

1.53

 

 

 

 

 

 

(V)

1.52

 

 

 

 

 

 

VOUTH

1.51

 

 

 

 

 

 

 

 

 

 

 

 

 

H

1.50

 

 

 

 

 

 

Voltage

 

 

 

 

 

 

1.49

 

 

 

 

 

 

1.48

 

 

 

 

 

 

Output

 

 

 

 

 

 

1.47

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.46

 

 

 

 

 

 

 

-50

-25

0

25

50

75

100

 

 

 

Temperature Topt(°C)

 

 

R1162x28x (ECO=H)

 

2.83

 

 

 

 

 

 

(V)

2.82

 

 

 

 

 

 

VOUTH

2.81

 

 

 

 

 

 

 

 

 

 

 

 

 

H

2.80

 

 

 

 

 

 

Voltage

 

 

 

 

 

 

2.79

 

 

 

 

 

 

2.78

 

 

 

 

 

 

Output

 

 

 

 

 

 

2.77

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.76

 

 

 

 

 

 

 

-50

-25

0

25

50

75

100

 

 

 

Temperature Topt(°C)

 

 

R1162x40x (ECO=H)

 

4.05

 

 

 

 

 

 

(V)

4.04

 

 

 

 

 

 

VOUTH

4.03

 

 

 

 

 

 

4.02

 

 

 

 

 

 

H

 

 

 

 

 

 

 

 

 

 

 

 

 

Voltage

4.01

 

 

 

 

 

 

4.00

 

 

 

 

 

 

 

 

 

 

 

 

 

Output

3.99

 

 

 

 

 

 

3.98

 

 

 

 

 

 

 

3.97

 

 

 

 

 

 

 

-50

-25

0

25

50

75

100

 

 

 

Temperature Topt(°C)

 

 

R1162x15x (ECO=L)

 

1.53

 

 

 

 

 

 

(V)

1.52

 

 

 

 

 

 

VOUTL

1.51

 

 

 

 

 

 

 

 

 

 

 

 

 

L

1.50

 

 

 

 

 

 

Voltage

 

 

 

 

 

 

1.49

 

 

 

 

 

 

1.48

 

 

 

 

 

 

Output

 

 

 

 

 

 

1.47

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.46

 

 

 

 

 

 

 

-50

-25

0

25

50

75

100

 

 

 

Temperature Topt(°C)

 

 

R1162x28x (ECO=L)

 

2.83

 

 

 

 

 

 

(V)

2.82

 

 

 

 

 

 

VOUTL

2.81

 

 

 

 

 

 

 

 

 

 

 

 

 

L

2.80

 

 

 

 

 

 

Voltage

 

 

 

 

 

 

2.79

 

 

 

 

 

 

2.78

 

 

 

 

 

 

Output

 

 

 

 

 

 

2.77

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.76

 

 

 

 

 

 

 

-50

-25

0

25

50

75

100

 

 

 

Temperature Topt(°C)

 

 

R1162x40x (ECO=L)

 

4.06

 

 

 

 

 

 

(V)

4.05

 

 

 

 

 

 

 

 

 

 

 

 

 

VOUTL

4.04

 

 

 

 

 

 

4.03

 

 

 

 

 

 

L

 

 

 

 

 

 

Voltage

4.02

 

 

 

 

 

 

4.01

 

 

 

 

 

 

 

 

 

 

 

 

 

Output

4.00

 

 

 

 

 

 

3.99

 

 

 

 

 

 

 

3.98

 

 

 

 

 

 

 

-50

-25

0

25

50

75

100

 

 

 

Temperature Topt(°C)

 

 

9

R1162x

5) Supply Current vs. Temperature

R1162x15x (ECO=H)

 

90

 

 

 

 

 

 

A)

80

 

 

 

 

 

 

H(

70

 

 

 

 

 

 

ISS

60

 

 

 

 

 

 

H

50

 

 

 

 

 

 

Current

 

 

 

 

 

 

40

 

 

 

 

 

 

30

 

 

 

 

 

 

Supply

 

 

 

 

 

 

20

 

 

 

 

 

 

10

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

-50

-25

0

25

50

75

100

 

 

 

Temperature Topt(°C)

 

 

R1162x28x (ECO=H)

 

90

 

 

 

 

 

 

A)

80

 

 

 

 

 

 

 

70

 

 

 

 

 

 

ISSH(

 

 

 

 

 

 

60

 

 

 

 

 

 

H

50

 

 

 

 

 

 

Current

 

 

 

 

 

 

40

 

 

 

 

 

 

30

 

 

 

 

 

 

Supply

 

 

 

 

 

 

20

 

 

 

 

 

 

10

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

-50

-25

0

25

50

75

100

 

 

 

Temperature Topt(°C)

 

 

R1162x40x (ECO=H)

 

90

 

 

 

 

 

 

A)

80

 

 

 

 

 

 

 

70

 

 

 

 

 

 

ISSH(

 

 

 

 

 

 

60

 

 

 

 

 

 

H

50

 

 

 

 

 

 

Current

 

 

 

 

 

 

40

 

 

 

 

 

 

30

 

 

 

 

 

 

Supply

 

 

 

 

 

 

20

 

 

 

 

 

 

10

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

-50

-25

0

25

50

75

100

 

 

 

Temperature Topt(°C)

 

 

R1162x15x (ECO=L)

 

8

 

 

 

 

 

 

A)

7

 

 

 

 

 

 

L(

6

 

 

 

 

 

 

L ISS

5

 

 

 

 

 

 

Current

4

 

 

 

 

 

 

3

 

 

 

 

 

 

Supply

2

 

 

 

 

 

 

1

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

-50

-25

0

25

50

75

100

 

 

 

Temperature Topt(°C)

 

 

R1162x28x (ECO=L)

 

8

 

 

 

 

 

 

A)

7

 

 

 

 

 

 

 

6

 

 

 

 

 

 

L ISSL(

 

 

 

 

 

 

5

 

 

 

 

 

 

Current

4

 

 

 

 

 

 

3

 

 

 

 

 

 

Supply

2

 

 

 

 

 

 

1

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

-50

-25

0

25

50

75

100

 

 

 

Temperature Topt(°C)

 

 

R1162x40x (ECO=L)

 

8

 

 

 

 

 

 

A)

7

 

 

 

 

 

 

 

6

 

 

 

 

 

 

L ISSL(

 

 

 

 

 

 

5

 

 

 

 

 

 

Current

4

 

 

 

 

 

 

3

 

 

 

 

 

 

Supply

2

 

 

 

 

 

 

1

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

-50

-25

0

25

50

75

100

 

 

 

Temperature Topt(°C)

 

 

10

Loading...
+ 22 hidden pages