Table of Contents............................. |
1 |
Usage Notice.................................... |
2 |
Precautions......................................... |
2 |
Safety Labels of This Machine.......... |
12 |
Regulation & Safety Notices.............. |
13 |
Other Information.............................. |
18 |
Introduction.................................... |
19 |
Product Features............................... |
19 |
Package Overview............................ |
20 |
Product Overview.............................. |
21 |
Connection Ports ................................. |
22 |
Control Panel........................................ |
23 |
Remote Control................................. |
24 |
Remote Control Battery Installation...... |
26 |
Remote Control Operating Range........ |
27 |
Basic Operations............................ |
28 |
Connecting the Projector................... |
28 |
Connect to Computer/Notebook........... |
28 |
Connect to AV Equipment .................... |
30 |
Powering On/Off the Projector.......... |
32 |
Powering On the Projector.................... |
32 |
Powering Off the Projector.................... |
33 |
Warning Indicator.................................. |
34 |
Adjusting the Projected Image.......... |
35 |
Adjusting the Position of Projector Image... |
35 |
Adjusting the Projector Zoom and Focus..36 |
|
Adjusting Projection Image Size........... |
37 |
User Settings.................................. |
39 |
Using the On Screen Display (OSD).39 |
|
How to operate...................................... |
39 |
PICTURE.............................................. |
40 |
SCREEN............................................... |
45 |
SETTING.............................................. |
48 |
AUDIO................................................... |
50 |
OPTIONS.............................................. |
51 |
3D......................................................... |
56 |
Table of Contents
Troubleshooting............................. |
57 |
Replacing the lamp........................ |
62 |
Appendices..................................... |
63 |
List of Compatible Signals................. |
63 |
Configurations of Terminals............... |
68 |
Terminal: Computer In (Mini D-sub 15 pin). 68 |
|
Terminal: PC Control (D-sub 9 pin)....... |
68 |
Specifications.................................... |
69 |
Cabinet Dimensions.......................... |
70 |
Trademarks........................................ |
71 |
1
English
Usage Notice
Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit.
■ Warning- Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury.
■ Caution- Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property.
■WarningDo not place vases, plant pots, cups, toiletries, medicines, small metal objects, or containers holding water or any other liquids, on or close to this machine. Fire or electric shock could result from
spillage or if such objects or substances fall inside this machine
■WarningKeep the machine and attachments out of the reach of children. If the machine is near children, it may cause injury.
■ WarningPlastic bags can be dangerous, please do not leave near babies and young children. To avoid the threat of suffocation, please keep away from their nose and mouth.
■WarningDo not use any power sources other than those that match the specifications shown in this manual. Doing so could result in fire or electric shock.
■WarningDo not damage, break, or modify the power cord.
Also, do not place heavy objects on the power cord, or pull the cord or bend it severely. Doing so could result in fire or electric shock.
■WarningTouching the prongs of the power cable’s plug with anything metallic constitutes a fire and electric shock hazard.
■WarningDo not use flammable sprays or solvents in the
vicinity of this machine. Also, avoid placeing these items in the vicinity of this machine. Doing so could result in fire or electric shock.
■ WarningBe sure to use the power cord supplied in this projector.
2
English
Usage Notice
■ WarningThe supplied power cord is for use with this machine only. Do not use it with other appliances. Doing so could result in fire or electric shock.
■ WarningIt is dangerous to handle the power cord plug with wet hands. Doing so could result in electric shock.
■ WarningBe sure to disconnect the plug from the wall outlet at least once a year and check for the following:
■There are burn marks on the plug.
■The prongs on the plug are deformed.
If any of the above conditions exist, do not use the plug and consult your dealer or service representative.
Use of the plug could result in fire or electric shock.
■ WarningBe sure to disconnect the power cord from the wall outlet at least once a year and check for the following:
■The power cord’s inner wires are exposed, broken, etc.
■The power cord’s coating has a crack or dent.
■When bending the power cord, the power turns off and on.
■Part of the power cord becomes hot.
■The power cord is damaged.
If any of the above conditions exist, do not use the power cord and consult your dealer or service
representative. Use of the power cord could result in fire or electric shock.
■ WarningBe sure to locate the machine as close as possible to a wall outlet. This will allow easy disconnection of the power cord in the event of an emergency.
■ WarningDo not use the connection cable if it is deformed, cracked, or damaged. Doing so could result in fire or electric shock. If the connection cable is
deformed, cracked, or damaged, contact your service representative to request a replacement cable.
■ WarningWhen using an extension cord or power strip, only connect equipment whose total power consumption is within the power rating for the extension cord or power strip. If the power rating is exceeded, it may cause heat buildup and result in fire.
■ WarningIf the machine emits smoke or odours, or if it behaves unusually, you must turn off its power immediately. After turning off the power, be sure to disconnect the power cord plug from the wall outlet. Then contact your service representative and report the problem.
3
English
Usage Notice
Do not use the machine. Doing so could result in fire or electric shock.
■ WarningIf metal objects, or water or other fluids fall inside this machine, you must turn off its power immediately. After turning off the power, be sure to disconnect the power cord plug from the wall outlet. Then contact your service representative and report the problem.
Do not use the machine. Doing so could result in fire or electric shock.
■ WarningNever operate this unit on AC power during a thunderstorm. If you see lightning or hear thunder, never touch the unit, cables and/or peripherals. An electric surge caused by the storm, may result in an electrical shock or damage to the unit.
■ WarningIf the machine topples, or if a cover or other part gets broken, you must turn off its power immediately. After turning off the power, be sure to disconnect the power cord plug from the wall outlet. Then contact your service representative and report the problem.
Do not use the machine. Doing so could result in fire or electric shock.
■WarningDo not use lens cap when projector is powered on
■WarningNever push objects of any kind into this product
through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
■ WarningDo not place or keep the projector within the reach of the children. It may fall or tip over, possibly causing serious injury
■ WarningDo not remove any covers or screws that are not mentioned in this manual. There are high voltage components inside the machine that may cause electric shock. Contact your service representative if any of the machine’s internal components require maintenance, adjustment, or repair.
■ WarningDo not disassemble or modify the machine. Doing so may cause injury or malfunction.
■WarningInstalling the Projector on a Wall or Ceiling:
a)Do not attempt to clean or replace parts for a machine that is installed in a high location on a wall or ceiling. Doing so may cause it to fall down, resulting in an injury.
4
English
Usage Notice
b)Do not open the lamp cover of a machine that is installed on a wall or ceiling. Doing so may cause the lamp cover to fall down. If the lamp is broken, pieces of glass may fall and cause an injury.
c)Contact your sales or service representative to clean or replace parts for a machine that is installed on a wall or ceiling.
d)If a machine is incorrectly installed on a wall or ceiling, it may fall down and cause an injury. Contact your sales or service representative if you want to install a machine on a wall or ceiling.
e)Do not obstruct the machine’s vents. Doing so risks fire caused by overheated internal components.
f)For users, do not install the projector by yourself. Contact your sales or service representative if you want to install the projector on a wall or ceiling.
g)For sales or service representatives:
- Use brackets that are strong enough to support the projector.
* PJ S2440/X2440/WX2440 Series weigh less than 2.6kg.
-The projector must be installed in a location that is sturdy enough to support the full weight of the projector and brackets.
-Use only the screws (three M4~16 screws) provided with the projector to attach the brackets to the projector.
■CautionKeep the machine away from humidity and dust.
Otherwise a fire or an electric shock might occur.
■CautionDo not place any objects on the machine. Doing
so may cause the machine to topple over, possibly resulting in injury.
■ CautionDo not place the machine on an unstable or tilted surface. If it topples over, an injury might occur.
■ CautionDo not place the machine or use it in an environment where it might get wet such as from snow, rain, or being near water. Doing so could result in fire or electric shock.
■ CautionDo not put your face or hand near the exhaust vents. Doing so could result in burns or an accident due to hot air coming from the exhaust vents.
■ CautionDo not use the machine on soft material such as paper or cloth that might get sucked into the intake vents. Doing so may cause heat buildup inside the machine, resulting in malfunction, burns, or fire.
5
English
Usage Notice
■CautionDo not place the machine in a location where air flow is poor. Doing so may cause fire due to internal components becoming overheated.
■CautionDo not place or store the machine in a location where
direct sunlight or heat generation might occur. The heat may deform or wear out the exterior parts or negatively affect internal parts. Doing so could result in fire.
■ CautionDo not place low heat resistant material near the exhaust vents. Hot air may come from the exhaust vents, resulting in damage to the machine or an accident.
■CautionDo not obstruct the machine’s vents. Doing so risks fire caused by overheated internal components.
■CautionPush the power plug all the way into the power outlet.
Do not use a power outlet with a loose connection. Doing so may result in heat buildup. Plug the power cord in the correct direction into the base. If they are not plugged in correctly, it could result in smoke, fire, or electric shock.
■ CautionIf this machine is not going to be used for several days or longer at a time, disconnect its power cord from the wall outlet.
■ CautionWhen disconnecting the power cord from the wall outlet, always pull the plug, not the cord. Pulling the cord can damage the power cord. Use of damaged power cords could result in fire or electric shock.
■ CautionBe sure to disconnect the plug from the wall outlet and clean the prongs and the area around the prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.
■ CautionWhen performing maintenance on the machine, always disconnect the power cord from the wall outlet.
■ CautionDo not place the power cord and connection cable in a way that might cause someone to trip and fall. The machine might fall over and cause an injury.
■ CautionThe machine may be very hot after it is turned off, especially the vents and the lower part of the unit where the lamp is located. Avoid touching these areas. Doing so may result in burns.
■ CautionDo not place the machine on other equipment or vice versa. Doing so may cause heat buildup inside the machine or cause the other equipment to malfunction.
6
English
Usage Notice
■ CautionDo not increase the volume unless you are listening while increasing the volume. Also, lower the volume before turning off the power, because a loud sound may be emitted when the power is turned on and cause hearing damage.
■ CautionDo not tilt the machine horizontally more than ±20 degrees. Doing so may cause the entrance of foreign objects in the housing of the machine which could result in fire or electric shock.
■ CautionIf the machine’s interior is not cleaned regularly, dust will accumulate. Fire and breakdown can result from heavy accumulation of dust inside this machine. Contact your sales or service representative for details about and charges for cleaning the machine’s interior.
■ CautionUnplug the power cord from the wall outlet before you move the machine. While moving the machine, take care that the power cord is not damaged under the machine. Failing to take these precautions could result in fire or electric shock.
■ CautionDo not use attachments not recommended by RICOH. Use of an incompatible attachments could cause hazards or damage to the product.
■CautionUnplug this product from the wall outlet and take the product to qualified service personnel if you encounter any of the following conditions:
a)The power supply cord or plug is damaged.
b)Liquid has been spilled, or objects have fallen into the product.
c)The product has been exposed to rain or water.
d)The product does not operate normally when following the operating instructions. Adjust only those controls that are covered by the operating instructions.
e)The product has been dropped or damaged in any way. (If the cabinet should break, please handle with care to avoid injury.)
■CautionThis product incorporates glass components,
including a lens and a lamp. If these should break, please handle with care to avoid injury and contact your sales representative for repair service. Avoid any broken pieces of glass since they may cause injury. In the unlikely event that the lamp ruptures, thoroughly clean the area around the projector and discard any edible items placed in that area since they may be contaminated.
7
English
Usage Notice
■ CautionDo not place anything in front of the lens while the projector is operating. Things placed in front of the lens may overheat and burn or start a fire.
■ Caution- Unauthorized substitutions may result in fire, electric shock, or other hazards. (Only the replacement of the lamp should be made by users.)
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to verify that the product is in proper operating condition.
■ CautionDo not use the product in a closed installation location. Do not place the product in a box or in any other closed installation location. Otherwise it may overheat, which could result in a risk of fire
8
English
Usage Notice
ABOUT THE LAMP
■ WarningWhen the lamp reaches the end of its life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under “Replacing the Lamp”.
■ WarningBefore replacing the lamp, turn off the power and wait at least one hour to allow the machine to cool completely. If it is not completely cool, you may burn or injure yourself due to the inside of the machine and lamp unit being hot. If you replace the lamp without unplugging the power cord from the power outlet, electric shock or explosion may occur.
■ WarningBe careful when handling the used lamp so that it does not break. If it breaks, it may cause injury.
■ CautionThis projector will detect the life of the lamp itself. Be sure to change the lamp when it shows warning messages.
■ CautionThe machine’s light uses a mercury vapor lamp that becomes high pressure when it is turned on. The lamp has the following characteristics, so be sure to handle it with care after understanding the contents. If the lamp explodes and you are either injured from broken pieces of glass, think you have gotten glass particles or mercury vapour in your eyes, or have inhaled glass particles or mercury vapour, contact a doctor immediately.
■Deterioration or shock can cause the lamp’s life span to end or the lamp to explode. If the lamp explodes, it may make a big noise.
■The time that it takes for the lamp to reach its life span or explode depends on each individual lamp and its operating conditions. It is possible that it might explode the first time it is used.
■If you use the lamp past its replacement period, the possibility of explosion increases.
■If the lamp explodes, broken glass pieces may be scattered around the inside of the machine and ejected from the vent or other opening.
9
English
Usage Notice
■If the lamp explodes, a very small amount of mercury vapor in the lamp tube and broken glass pieces may be ejected from the vents or other opening.
What to do if
a lamp has exploded
If. the lamp explodes, remove the power cord from the projector, leave the room while making sure it
is
thoroughly ventilated.
.If the lamp explodes and you think that you have gotten glass particles or mercury vapor in
your eyes or have inhaled
either, contact a doctor immediately.
.Clean up the area around the projector completely while being careful not to get injured
from any broken glass pieces.
Throw. away any food that was near the projector.
.Ask your service representative to replace the lamp and inspect
the projector.
10
English
Usage Notice
REMOTE CONTROL BATTERY
Warning
• Never throw batteries into a fire.
Using the batteries improperly may cause them to explode or leak and may result in serious injury. If battery-leaking fluid contacts skin, wash the fluid off immediately with clean water and consult a doctor. If the fluid spills on an instrument, avoid contact and wipe it off using tissue paper. Then dispose of the used tissue paper as flammable garbage after moistening the tissue with water.
• Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Notes
•Be sure to use AAA (R03) size batteries.
•Dispose of batteries in a designated disposal area.
•Attention should be drawn to the environmental aspects of battery disposal.
•If the remote control does not operate correctly, or if the operating range becomes reduced, replace the batteries.
•Avoid contact with water or liquid.
•Do not expose the remote control to moisture or heat.
•Do not drop the remote control.
•If the batteries have leaked in the remote control, carefully wipe the case clean and install new batteries.
•Dispose of used batteries according to the instructions.
•The remote control may fail to operate if the infrared remote sensor is exposed to bright sunlight or fluorescent lighting.
Important:
Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handing or operating this product.
11
English
Usage Notice
Safety Labels of This Machine
1 To replace the lamp, unplug the power cord and then wait for 60 minutes.
2 Do not place anything in front of the lens while the projector is operating. Things placed in front of the lens may overheat and burn or start a fire. If you want to temporarily stop the projected image, use the AV mute on the remote control or the keypad.
3 Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your eyesight.
4 This product should be operated only from the type of power source which does not exceed the voltage range specified on the rating label and the power cord.
5 Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating. Do not place your hands, face, or other objects near the air exhaust, the lamp cover or the bottom of the unit. Doing so could result in injury and/or damage the object.
1 
2 
5
3
4
12
English
Usage Notice
Regulation & Safety Notices
This appendix lists the general notices of your Projector.
Notice: Users in the United States of America FCC notice
MODEL NAME: RICOH PJ S2440/ X2440/ WX2440
TRADE NAME: PROJECTOR
MODEL NAME: RICOH PJ S2440/ X2440/ WX2440
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.This device may not cause harmful interference and
2.This device must accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
▀■Reorient or relocate the receiving antenna.
▀■Increase the separation between the device and receiver.
▀■Connect the device into an outlet on a circuit different from that to which the receiver is connected.
▀■Consult the dealer or an experienced radio/television technician for help.
13
English
Usage Notice
RESPONSIBLE PARTY: Ricoh Americas Corporation
5 Dedrick Place, West Caldwell, NJ 07006
Phone: 973-882-2000
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance
with FCC regulations.
Caution
Changes or modifications not expressly approved by the manufacturer could void the user’s authority,
which is granted by the Federal Communications Commission, to operate this projector.
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY
AND MUST BE RECYCLED OR DISPOSED OF
ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.
Notes to Users in the State of California
Perchlorate Material - special handling may apply, See www. dtsc.ca.gov/hazardouswaste/perchlorate.
WARNING: Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm.
Wash hands after handling.
Notes to Canadian Users
Remarques à l’attention des utilisateurs au Canada
Contains mercury / Contient du mercure
For more information on safe handling |
Pour plus d’ informations sur les |
procedures, the measures to be taken in |
procédures de manutention sécuritaire, |
case of accidental breakage and safe |
les mesures à prendre en cas de bris |
disposal option visit: |
accidentel et option d’ élimination |
www.ec.gc.ca/mercure-mercury |
sécuritaire visitez: |
Dispose of or recycle in accordance |
www.ec.gc.ca/mercure-mercury/default. |
with applicable laws. |
asp?lang=Fr&n=DB6D2996-1 |
|
Éliminez ou les recyclez conformément |
|
aux lois applicables. |
|
|
14
English
Usage Notice
Declaration of Conformity for EU countries
▀■EMC Directive 2014/30/EC (including amendments) ▀■Low Voltage Directive 2014/35/EC
Notice: Users in EU countries
CE Marking Traceability Information (For EU Countries Only)
Manufacturer:
Ricoh Co., Ltd.
3-6 Nakamagome 1-chome, Ohta-ku, Tokyo. 143-8555,
Japan
Importer:
Ricoh Europe PLC
20 Triton Street, London. NW1 3BF, United Kingdom
User Information on Electrical and Electronic Equipment
Users in the countries where this symbol shown in this section has been specified in national law on collection and treatment of E-waste.
Our Products contain high quality components and are designed to facilitate recycling.
Our products or product packaging are marked with the symbol below.
This product contains substances which are harmful to humans and the environment.
15
English
Usage Notice
• The lamp contains mercury.
Please dispose of this product or used lamps in accordance with local regulations.
The symbol indicates that the product must not be treated as municipal waste. It must be disposed of separately via the appropriate return and collection systems available. By following these instructions you
ensure that this product is treated correctly and help to reduce potential impacts on the environment and human health, which could otherwise result from inappropriate handling. Recycling of products helps to conserve natural resources and protect the environment.
For more detailed information on collection and recycling systems for this product, please contact the shop where you purchased it, your local dealer or sales/service representatives.
Notice: Users in Turkey
All Other Users
If you wish to discard this product, please contact your local authorities, the shop where you bought this product, your local dealer or sales/ service representatives.
16
English
Usage Notice
Notice: Users in the EU
Note for the Battery and/or Accumulator Symbol
In accordance with the Battery Directive 2006/66/EC Article 20 Information for end-users Annex II, the above symbol is printed on batteries and accumulators. This symbol means that in the European Union, used batteries and accumulators should be disposed of separately from your household waste. In the EU, there are separate collection systems for not only used electrical and electronic products but also batteries and accumulators. Please dispose of them correctly at your local community waste collection/recycling centre.
Notice: Users in Taiwan
17
English
Usage Notice
Other Information
Copyrights to Images
When projecting images using the projector, be careful not to infringe the copyright of protected materials. The following are examples that may infringe the copyright of protected materials.
•Broadcasting images or movies for commercial purposes
•Modifying images or movies using functions such as freeze, magnify, or zoom to broadcast images for commercial purposes or public viewing
•Varying the aspect ratio of images or movies using a function that changes the screen size to broadcast images for commercial purposes or public viewing
Note to Users Viewing 3D Images
Pay attention to the following points when viewing images using 3D glasses with projector:
•How 3D images are viewed may vary according to the individual.
•Do not use 3D glasses for viewing any material other than 3D images.
•Before viewing 3D images, make sure to read the manuals provided with your 3D glasses and 3D compatible content.
•Avoid viewing 3D images for a long period of time. Take a break of 15 minutes or longer after every hour of viewing.
•If you feel sick while viewing 3D images, stop viewing them. If you continue to feel sick, consult a doctor.
•When viewing 3D image in a room where on LED lighting system or fluorescent lights are used, you may feel that the light in the room flickers. If this is the case, dim the lights until you do not notice any flickers, or turn off the lights.
•If you or any member of your family has a history of lightsensitive seizures, consult a doctor before viewing 3D images.
18
English
Introduction
Product Features
Outstanding features include:
■True 800x600 (SVGA) / 1024x768 (XGA)/ 1280x800 (WXGA) resolution, 16.7M True colors
■Weight <2.6kg(5.75lbs)
■Manual focus projection 1:1.10 zoom lens
■Built-in full screen NTSC/PAL/SECAM video capability with S-video/ Composite/ component through D-sub terminals
■UXGA/ WXGA/ Quad VGA/ SXGA+/ SXGA/ XGA/ SVGA/ VGA/ MAC compatibility
■User friendly multilingual on screen display
■Automatic image resizing to 800x600 (SVGA)/ 1024x768 (XGA)/ 1280x800 (WXGA) and full screen
19
English
Introduction
Package Overview
This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing.
|
|
|
AV Mute |
|
|
|
|
|
Auto |
|
Input |
|
|
|
|
Enter |
|
|
|
|
Menu |
|
ECO |
|
|
|
Keystone |
Volume |
|
|
|
|
Computer |
Video |
HDMI |
|
|
|
1 |
2 |
3 |
|
|
|
Digital A Digital B Magnify |
||
te |
|
|
4 |
5 |
+6 |
No |
|
|
Aspect |
Freeze |
|
|
|
7 |
8 |
-9 |
|
|
|
Status |
Picture |
|
|
|
|
|
0 |
MHL |
|
Due to the difference |
|
|
|
|
|
in applications for each |
Projector |
Lens Cap |
Remote Control |
||
country, some regions |
|
|
(with Batteries, |
||
may have different |
|
|
please see page 27) |
||
accessories. |
|
|
|
|
|
Power Cord |
CD-ROM |
RGB Cable |
First |
|
|
This |
|
|
Read |
|
|
Read This First
About the CD-ROM
Contains the user’s manual in PDF format and the projector management software.
Support languages of the user’s manual are English, Japanese and Chinese. For the other languages, visit RICOH Web site.
20
English
Loading...