Ricoh 3035, DSm735, DSm745, IS 2235, IS 2245 User Manual

...

0 (0)

Operating Instructions

General Settings Guide

1Getting Started

2Combined Function Operations

3Document Server

4User Tools (System Settings)

5Registering Addresses and Users for Facsimile/Scanner Functions

6Troubleshooting

7Remarks

8Entering Text

9Specifications

Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Safety Information in this manual before using the machine.

Introduction

This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference.

Important

Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine.

Notes:

Some illustrations in this manual might be slightly different from the machine.

Certain options might not be available in some countries. For details, please contact your local dealer.

Laser Safety:

This machine is considered a class 1 laser device, safe for office/EDP use. The machine contains two GaAIAs laser diodes, 5-milliwatt, 760-800 nanometer wavelength for each emitter. Direct (or indirect reflected ) eye contact with the laser beam might cause serious eye damage. Safety precautions and interlock mechanisms have been designed to prevent any possible laser beam exposure to the operator.

The following label is attached on the back side of the machine.

Caution:

Use of controls or adjustments or performance of procedures other than those specified in this manual might result in hazardous radiation exposure.

Notes:

The model names of the machines do not appear in the following pages. Check the type of your machine before reading this manual. (For details, see p.14 “Machine Types”.)

•Type 1: DSm735/LD235/Aficio 3035/IS 2235

•Type 2: DSm745/LD245/Aficio 3045/IS 2245

Certain types might not be available in some countries. For details, please contact your local dealer.

Two kinds of size notation are employed in this manual. With this machine refer to the metric version.

For good copy quality, the supplier recommends that you use genuine toner from the supplier.

The supplier shall not be responsible for any damage or expense that might result from the use of parts other than genuine parts from the supplier with your office products.

Power Source

220 - 240V, 50/60Hz, 8A or more

Please be sure to connect the power cord to a power source as above. For details about power source, see p.153 “Power Connection”.

Manuals for This Machine

The following manuals describe the operational procedures of this machine. For particular functions, see the relevant parts of the manual.

Note

Manuals provided are specific to machine type.

Adobe Acrobat Reader/Adobe Reader is necessary to view the manuals as a PDF file.

Two CD-ROMs are provided:

•CD-ROM 1 “Operating Instructions”

•CD-ROM 2 “Scanner Driver and Document Management Utility”

General Settings Guide (this manual)

Provides an overview of the machine and describes System Settings (such as Tray Paper Settings), Document Server functions, and troubleshooting. Refer to this manual for Address Book procedures such as registering fax numbers, e-mail addresses, and user codes.

Security Reference

This manual is for administrators of this machine. It describes security functions that the administrators can use to protect data from being tampered, or prevent the machine from unauthorized use.

Also refer to this manual for the procedures for registering administrators, as well as setting user and administrator authentication.

Network Guide (PDF file - CD-ROM1)

Provides information about configuring and operating the printer in a network environment or using software.

This manual covers all models, and therefore contains functions and settings that may not be available for your model. Images, illustrations, functions, and supported operating systems may differ from those of your model.

Copy Reference

Describes operations, functions, and troubleshooting for the machine's copier function.

Facsimile Reference <Basic Features>

Describes operations, functions, and troubleshooting for the machine's facsimile function.

Facsimile Reference <Advanced Features>

Describes advanced facsimile functions such as line settings and procedures for registering IDs.

Printer Reference

Describes system settings, operations, functions, and troubleshooting for the machine's printer function.

Scanner Reference (PDF file - CD-ROM1)

Describes operations, functions, and troubleshooting for the machine's scanner function.

Manuals for DeskTopBinder Lite

DeskTopBinder Lite is a utility included on the CD-ROM labeled “Scanner Driver and Document Management Utility”.

•DeskTopBinder Lite Setup Guide (PDF file - CD-ROM2)

Describes installation of, and the operating environment for DeskTopBinder Lite in detail. This guide can be displayed from the [Setup] display when DeskTopBinder Lite is installed.

•DeskTopBinder Introduction Guide (PDF file - CD-ROM2)

Describes operations of DeskTopBinder Lite and provides an overview of its functions. This guide is added to the [Start] menu when DeskTopBinder Lite is installed.

•Auto Document Link Guide (PDF file - CD-ROM2)

Describes operations and functions of Auto Document Link installed with DeskTopBinder Lite. This guide is added to the [Start] menu when DeskTopBinder Lite is installed.

Other manuals

•PS3 Supplement (PDF file - CD-ROM1)

•Unix Supplement (Available from an authorized dealer, or as a PDF file on our Web site.)

What You Can Do with This Machine

The following introduces the functions of this machine, and the relevant manuals containing detailed information about them.

Products marked with * are optional. For details about optional products, see p.17 “Options”, or contact your local dealer.

Copier, Facsimile, Printer, and

Utilizing Stored Documents

Scanner Functions

AHT002S

This machine provides copier, facsimile*, printer*, and scanner* functions.

•You can make copies of originals. With a finisher*, you can sort and staple copies. See Copy Reference.

•You can send originals by fax or e- mail, and receive faxes from other parties. See Facsimile Reference <Basic Features>, and Facsimile Reference <Advanced Features>.

•You can print documents created in computer applications. See

Printer Reference .

•You can scan originals and send scan files to a computer. See Scanner Reference.

GCKONN2J

•You can store files scanned by this machine, or files sent from other fax machine or computers, into the machine's hard disk. You can print and fax stored files as required. You can also change print settings and print multiple documents (Document Server). See p.35 “Using the Document Server”.

•With DeskTopBinder Professional*/Lite, you can search, check, print, and delete stored documents using your computer. You can also retrieve stored documents scanned in scanner mode. With file format converter*, you can even download documents stored in copy and printer functions to your computer. See Network Guide and Scanner Reference.

iii

Paperless Fax Transmission		Fax Transmission and
and Reception		Reception Through the
		Internet
		Internet
Reception
Reception

GCKONN3J

•You can store received fax messages on the machine's hard disk, instead of printing them onto paper. You can use DeskTopBinder Professional or Web Image Monitor to check, print, delete, retrieve, or download documents using your computer (Storing received documents). See Facsimile Reference <Advanced Features>.

Transmission

xxx@xxx.com

GCKONN8J

•You can send fax documents through e-mail by specifying the recipient’s e-mail address (Internet Fax Transmission).

You can receive sent documents via Internet Fax, or from computers (Internet Fax Reception).

See Facsimile Reference<Basic Features>.

•You can send faxes by using data such as the IP address to specify the IP-Fax destination (IP-Fax Transmission).

The transmitted files can be received using an Internet fax machine (IP-Fax Reception). See

Facsimile Reference <Basic Features>.

AHT003S

•You can send documents created in computer applications to another party's fax machine directly, without performing a print job (LAN-Fax). See Facsimile Reference <Advanced Features>.

Using the Scanner in a

Administrating the

Network Environment

Machine/Protecting

Documents (Security

Functions)

AHT005S

•You can send scan files to a specified destination using e-mail (Sending scan file by e-mail). See

Scanner Reference.

•With ScanRouter delivery software, you can save scan files in specified destinations on network computers (Using the network delivery scanner function). See Scanner Reference.

•You can send scan files directly to folders (Sending scan file by Scan to Folder). See Scanner Reference.

AHT006S

•You can protect documents from unauthorized access and stop them from being copied without permission. See Security Reference.

•You can control the use of the machine, as well as prevent machine settings from being changed without authorization. See Security Reference.

•By setting passwords, you can prevent unauthorized access via the network. See Security Reference.

•You can erase the data on the hard disk to prevent the information from leaking out. See the manual for the DataOverWriteSecurity Unit* and Security Reference.

Monitoring the Machine Via		Preventing an Unauthorized
Computer		Copy

AHT007S

You can monitor machine status and change settings using a computer.

•Using SmartDeviceMonitor for Admin, SmartDeviceMonitor for Client, or Web Image Monitor, you can use a computer to view the machine's status, such as to check on paper quantities, or misfeeds, etc. See Network Guide.

•You can use Web Image Monitor to make network settings. See Network Guide.

•You can also use Web Image Monitor to register and manage items such as user codes, fax numbers, e- mail addresses, and folders in the Address Book. See the Web Image Monitor's Help.

•Using Web Image Monitor, you can receive e-mails notifying you when toner runs out or a paper misfeed occurs. See the Web Image Monitor Help.

•Using Web Image Monitor, you can receive information on the machine status via e-mail. See the Web Image Monitor Help.

AHU004S

•Using the printer driver, you can embed a pattern in the printed document. If the document is copied on a machine with the Copy Data Security Unit(*), protected pages are grayed out in the copy, preventing confidential information from being copied. If the document is copied on a machine without the Copy Data Security Unit(*), the hidden text becomes conspicuous in the copy, showing that the copy is unauthorized. See the printer driver Help and Printer Reference.

•Using the printer driver, you can embed text in the printed document for unauthorized copy prevention. If the document is copied, scanned, or stored in a Document Server by a copier or multifunction printer, the embedded text appears conspicuous in the copy, discouraging such unauthorized copying. See the printer driver Help and Printer Reference.

•If a document protected by unauthorized copy guard is copied on a machine that is equipped with the Copy Data Security Unit (*), the machine beeps to notify users that unauthorized copying is being attempted. See Security Reference.

TABLE OF CONTENTS
Manuals for This Machine ......................................................................................	i
What You Can Do with This Machine..................................................................	iii
Copier, Facsimile, Printer, and Scanner Functions...................................................	iii
Utilizing Stored Documents.......................................................................................	iii
Paperless Fax Transmission and Reception.............................................................	iv
Fax Transmission and Reception Through the Internet ............................................	iv
Using the Scanner in a Network Environment ...........................................................	v
Administrating the Machine/Protecting Documents (Security Functions) ..................	v
Monitoring the Machine Via Computer......................................................................	vi
Preventing an Unauthorized Copy ............................................................................	vi
Copyrights and Trademarks .................................................................................	1
Trademarks ................................................................................................................	1
Information about Installed Software..........................................................................	2
How to Read This Manual .....................................................................................	8
Safety Information .................................................................................................	9
Safety During Operation.............................................................................................	9
Positions of RWARNING and RCAUTION labels ............................................	11
ENERGY STAR Program .....................................................................................	12
Machine Types .....................................................................................................	14
1. Getting Started
Guide to Components .........................................................................................	15
Options .................................................................................................................	17
External Options.......................................................................................................	17
Internal Options........................................................................................................	18
Control Panel........................................................................................................	19
Display Panel ...........................................................................................................	21
When the Authentication Screen is displayed..........................................................	22
Turning On the Power .........................................................................................	23
Turning On the Main Power .....................................................................................	23
Turning On the Power ..............................................................................................	24
Turning Off the Power ..............................................................................................	24
Turning Off the Main Power .....................................................................................	24
Saving Energy..........................................................................................................	25
2. Combined Function Operations
Changing Modes ..................................................................................................	27
Multi-Access.........................................................................................................	29

vii

3. Document Server
Relationship between the Document Server and Other Functions.................	33
Document Server Display ........................................................................................	34
Using the Document Server................................................................................	35
Storing Data .............................................................................................................	35
Changing Stored Document's File Name, User Name, or Password.......................	38
Searching for Stored Documents .............................................................................	39
Printing Stored Documents ......................................................................................	40
Deleting Stored Documents .....................................................................................	43
Viewing Stored Documents Using Web Image Monitor ...........................................	44
Downloading Stored Documents..............................................................................	44
Settings for the Document Server......................................................................	45
4. User Tools (System Settings)
User Tools Menu (System Settings)...................................................................	47
Accessing User Tools (System Settings) ..........................................................	50
Changing Default Settings .......................................................................................	50
Quitting User Tools ..................................................................................................	50
Settings You Can Change with User Tools .......................................................	51
General Features .....................................................................................................	51
Tray Paper Settings .................................................................................................	55
Timer Settings ..........................................................................................................	58
Administrator Tools ..................................................................................................	61
5. Registering Addresses and Users for Facsimile/Scanner
Functions
Address Book.......................................................................................................	69
Registering Names ..............................................................................................	72
Registering a Name .................................................................................................	72
Changing a Registered Name..................................................................................	73
Deleting a Registered Name ....................................................................................	73
Authentication Information .................................................................................	74
Registering a New User Code..................................................................................	74
Changing a User Code.............................................................................................	75
Deleting a User Code...............................................................................................	76
Displaying the Counter for Each User Code ............................................................	76
Printing the Counter for Each User Code.................................................................	76
Clearing the Number of Prints..................................................................................	77
Fax Destination ....................................................................................................	78
Registering a Fax Destination ..................................................................................	79
Changing a Registered Fax Destination ..................................................................	81
Deleting a Registered Fax Destination.....................................................................	82
Registering an IP-Fax Destination ...........................................................................	83
Changing a Registered IP-Fax Destination..............................................................	84
Deleting a Registered IP-Fax Destination ................................................................	85
E-mail Destination................................................................................................	86
Registering an E-mail Destination............................................................................	86
Changing a Registered E-mail Destination ..............................................................	87
Deleting a Registered E-mail Destination ................................................................	88

viii

Registering Folders .............................................................................................	89
Using SMB to Connect.............................................................................................	89
Using FTP to Connect..............................................................................................	93
Using NCP to Connect .............................................................................................	96
Registering Names to a Group .........................................................................	100
Registering a New Group.......................................................................................	100
Registering Names to a Group...............................................................................	101
Displaying Names Registered in Groups ...............................................................	101
Removing a Name from a Group ...........................................................................	102
Changing a Group Name .......................................................................................	102
Deleting a Group ....................................................................................................	103
Adding a Group to Another Group .........................................................................	103
Deleting a Group within a Group............................................................................	103
Registering a Protection Code .........................................................................	105
Registering a Protection Code To a Single User ...................................................	105
Registering a Protection Code To a Group User ...................................................	106
Registering the Transfer Request ....................................................................	107
Registering a Transfer Station/Receiving Station ..................................................	107
Changing a Registered Transfer Station/Receiving Station...................................	109
Deleting a Registered Transfer Station/Receiving Station .....................................	110
Registering Authentication ...............................................................................	111
SMTP Authentication .............................................................................................	111
LDAP Authentication ..............................................................................................	112
6. Troubleshooting
If Your Machine Does Not Operate As You Want............................................	115
General ..................................................................................................................	115
Document Server ...................................................................................................	118
B Loading Paper ...............................................................................................	119
Loading Paper into Paper Trays ............................................................................	119
Loading Paper into Large Capacity Tray (optional)................................................	119
D Adding Toner.................................................................................................	122
Removing Toner.................................................................................................	123
Inserting Toner...................................................................................................	124
x Clearing Misfeeds .........................................................................................	125
Changing the Paper Size...................................................................................	134
Changing the Paper Size of the Paper Tray .........................................................	134
d Adding Staples..............................................................................................	137
1000-Sheet Finisher...............................................................................................	137
2 Tray Finisher .......................................................................................................	138
Booklet Finisher .....................................................................................................	140
Removing Jammed Staples ..............................................................................	142
1000-Sheet Finisher...............................................................................................	142
2 Tray Finisher .......................................................................................................	143
Booklet Finisher .....................................................................................................	144
y Removing Punch Waste ...............................................................................	146
Replacing the Stamp Cartridge ........................................................................	147

7. Remarks
Dos and Don'ts...................................................................................................	149
Toner...................................................................................................................	150
Handling Toner.......................................................................................................	150
Toner Storage ........................................................................................................	151
Used Toner ............................................................................................................	151
Where to Put Your Machine ..............................................................................	152
Machine Environment ............................................................................................	152
Moving....................................................................................................................	152
Power Connection..................................................................................................	153
Access to the Machine ...........................................................................................	153
Maintaining Your Machine ................................................................................	154
Cleaning the Exposure Glass.................................................................................	154
Cleaning the Exposure Glass Cover ......................................................................	154
Cleaning the Auto Document Feeder.....................................................................	154
Changing the Photoconductor Unit (PCU) .............................................................	155
Other Functions .................................................................................................	156
Inquiry ....................................................................................................................	156
Changing the Language.........................................................................................	156
Counter ...............................................................................................................	157
Displaying the Total Counter..................................................................................	157
8. Entering Text
Entering Text......................................................................................................	159
Available Characters ..............................................................................................	159
Keys .......................................................................................................................	159
How to Enter Text ..................................................................................................	160
9. Specifications
Main unit .............................................................................................................	161
Options ...............................................................................................................	165
Exposure Glass Cover ...........................................................................................	165
Auto Document Feeder ..........................................................................................	165
1000-Sheet Finisher...............................................................................................	166
2 Tray Finisher .......................................................................................................	167
Punch Kit................................................................................................................	168
Booklet Finisher .....................................................................................................	169
Bridge Unit .............................................................................................................	170
Internal Tray 2 (1 bin tray)......................................................................................	171
Large Capacity Tray...............................................................................................	171
Paper Tray Unit ......................................................................................................	172
Copy Paper .........................................................................................................	173
Recommended Paper Sizes and Types.................................................................	173
Unusable Paper .....................................................................................................	176
Paper Storage ........................................................................................................	177
INDEX.......................................................................................................	178

Copyrights and Trademarks

Trademarks

Microsoft®, Windows® and Windows NT® are registered trademarks of Microsoft Corporation in the United States and/or other countries.

Acrobat® is a registered trademark of Adobe Systems Incorporated.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Ricoh Company, Ltd. is under license.

NetWare is a registered trademark of Novell, Inc.

Other product names used herein are for identification purposes only and might be trademarks of their respective companies. We disclaim any and all rights to those marks.

The proper names of the Windows operating systems are as follows:

•The product name of Windows® 95 is Microsoft® Windows® 95

•The product name of Windows® 98 is Microsoft® Windows® 98

•The product name of Windows® Me is Microsoft® Windows® Millennium Edition (Windows Me)

•The product names of Windows® 2000 are as follows: Microsoft® Windows® 2000 Advanced Server Microsoft® Windows® 2000 Server

Microsoft® Windows® 2000 Professional

•The product names of Windows® XP are as follows: Microsoft® Windows® XP Professional

Microsoft® Windows® XP Home Edition

•The product names of Windows Server™ 2003 are as follows: Microsoft® Windows Server™ 2003 Standard Edition Microsoft® Windows Server™ 2003 Enterprise Edition Microsoft® Windows Server™ 2003 Web Edition

•The product names of Windows® NT are as follows: Microsoft® Windows NT® Server 4.0

Microsoft® Windows NT® Workstation 4.0

Information about Installed Software

expat

•The software including controller, etc. (hereinafter "software") installed on this product uses the expat under the conditions mentioned below.

•The product manufacturer provides warranty and support to the software of the product including the expat, and the product manufacturer makes the initial developer and copyright holder of the expat, free from these obligations.

•Information relating to the expat is available at: http://expat.sourceforge.net/

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

NetBSD

1. Copyright Notice of NetBSD

For all users to use this product:

This product contains NetBSD operating system:

For the most part, the software constituting the NetBSD operating system is not in the public domain; its authors retain their copyright.

The following text shows the copyright notice used for many of the NetBSD source code. For exact copyright notice applicable for each of the files/binaries, the source code tree must be consulted.

A full source code can be found at http://www.netbsd.org/.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

ARedistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

BRedistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

CAll advertising materials mentioning features or use of this software must display the following acknowledgment:

This product includes software developed by The NetBSD Foundation, Inc. and its contributors.

DNeither the name of The NetBSD Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

2.Authors Name List

All product names mentioned herein are trademarks of their respective owners.

The following notices are required to satisfy the license terms of the software that we have mentioned in this document:

• This product includes software developed by the University of California, Berkeley and its contributors.

• This product includes software developed by Jonathan R. Stone for the NetBSD Project.

• This product includes software developed by the NetBSD Foundation, Inc. and its contributors.

• This product includes software developed by Manuel Bouyer.

• This product includes software developed by Charles Hannum.

• This product includes software developed by Charles M. Hannum.

• This product includes software developed by Christopher G. Demetriou.

• This product includes software developed by TooLs GmbH.

• This product includes software developed by Terrence R. Lambert.

• This product includes software developed by Adam Glass and Charles Hannum.

• This product includes software developed by Theo de Raadt.

•This product includes software developed by Jonathan Stone and Jason R. Thorpe for the NetBSD Project.

•This product includes software developed by the University of California, Lawrence Berkeley Laboratory and its contributors.

•This product includes software developed by Christos Zoulas.

•This product includes software developed by Christopher G. Demetriou for the NetBSD Project.

•This product includes software developed by Paul Kranenburg.

•This product includes software developed by Adam Glass.

•This product includes software developed by Jonathan Stone.

•This product includes software developed by Jonathan Stone for the NetBSD Project.

•This product includes software developed by Winning Strategies, Inc.

•This product includes software developed by Frank van der Linden for the NetBSD Project.

•This product includes software developed for the NetBSD Project by Frank van der Linden

•This product includes software developed for the NetBSD Project by Jason R. Thorpe.

•The software was developed by the University of California, Berkeley.

•This product includes software developed by Chris Provenzano, the University of California, Berkeley, and contributors.

Sablotron

a)The application software installed on this product includes the Sablotron software Version 0.82 (hereinafter, "Sablotron 0.82"), with modifications made by the product manufacturer. The original code of the Sablotron 0.82 is provided by Ginger Alliance Ltd., the initial developer, and the modified code of the Sablotron 0.82 has been derived from such original code provided by Ginger Alliance Ltd.

b)The product manufacturer provides warranty and support to the application software of this product including the Sablotron 0.82 as modified, and the product manufacturer makes Ginger Alliance Ltd., the initial developer of the Sablotron 0.82, free from these obligations.

c)The Sablotron 0.82 and the modifications thereof are made available under the terms of Mozilla Public License Version 1.1 (hereinafter, "MPL 1.1"), and the application software of this product constitutes the "Larger Work" as defined in MPL 1.1. The application software of this product except for the Sablotron 0.82 as modified is licensed by the product manufacturer under separate agreement(s).

d)The source code of the modified code of the Sablotron 0.82 is available at: http://support-download.com/services/device/sablot/notice082.html

e)The source code of the Sablotron software is available at: http://www.gingerall.com

f)MPL 1.1 is available at: http://www.mozilla.org/MPL/MPL-1.1.html

JPEG LIBRARY

•The software installed on this product is based in part on the work of the Independent JPEG Group.

SASL

CMU libsasl

Tim Martin

Rob Earhart

Rob Siemborski

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

ARedistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

CThe name "Carnegie Mellon University" must not be used to endorse or promote products derived from this software without prior written permission. For permission or any other legal details, please contact:

Office of Technology Transfer Carnegie Mellon University 5000 Forbes Avenue Pittsburgh, PA 15213-3890

(412) 268-4387, fax: (412) 268-7395 tech-transfer@andrew.cmu.edu

DRedistributions of any form whatsoever must retain the following acknowledgment:

"This product includes software developed by Computing Services at Carnegie Mellon University (http://www.cmu.edu/computing/)."

CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

MD4

License to copy and use this software is granted provided that it is identified as the "RSA Data Security, Inc. MD4 Message-Digest Algorithm" in all material mentioning or referencing this software or this function.

License is also granted to make and use derivative works provided that such works are identified as "derived from the RSA Data Security, Inc. MD4 MessageDigest Algorithm" in all material mentioning or referencing the derived work.

RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability of this software for any particular purpose. It is provided "as is" without express or implied warranty of any kind.

These notices must be retained in any copies of any part of this documentation and/or software.

MD5

License to copy and use this software is granted provided that it is identified as the "RSA Data Security, Inc. MD5 Message-Digest Algorithm" in all material mentioning or referencing this software or this function.

License is also granted to make and use derivative works provided that such works are identified as "derived from the RSA Data Security, Inc. MD5 MessageDigest Algorithm" in all material mentioning or referencing the derived work.

These notices must be retained in any copies of any part of this documentation and/or software.

Samba(Ver 2.2.2-ja-1.1)

For SMB transmission, this machine uses Samba ver 2.2.2-ja-1.1 (hereinafter referred to as Samba 2.2.2-ja-1.1).

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA

Note

The source code for SMB transmission by this machine can be downloaded from the following website:

http://support-download.com/services/scbs

RSA BSAFE®

•This product includes RSA BSAFE® cryptographic or security protocol software from RSA Security Inc.

•RSA and BSAFE are registered trademarks of RSA Security Inc. in the United States and/or other countries.

How to Read This Manual

Symbols

The following set of symbols is used in this manual.

RWARNING:

This symbol indicates a potentially hazardous situation that might result in death or serious injury when you misuse the machine without following the instructions under this symbol. Be sure to read the instructions, all of which are described in the Safety Information section.

RCAUTION:

This symbol indicates a potentially hazardous situation that might result in minor or moderate injury or property damage that does not involve personal injury when you misuse the machine without following the instructions under this symbol. Be sure to read the instructions, all of which are described in the Safety Information section.

* The statements above are notes for your safety.

Important

If this instruction is not followed, paper might be misfed, originals might be damaged, or data might be lost. Be sure to read this.

Preparation

This symbol indicates information or preparations required prior to operating.

Note

This symbol indicates precautions for operation, or actions to take after abnormal operation.

Limitation

This symbol indicates numerical limits, functions that cannot be used together, or conditions in which a particular function cannot be used.

Reference

This symbol indicates a reference.

[ ]

Keys that appear on the machine's display panel.

{}

Keys built into the machine's control panel.

Safety Information

When using this machine, the following safety precautions should always be followed.

Safety During Operation

In this manual, the following important symbols are used:

RWARNING:

Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury.

RCAUTION:

Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property.

RWARNING:

•Connect the power cord directly into a wall outlet and do not use an extension cord.

•Disconnect the power plug (by pulling the plug, not the cable) if the power cable or plug becomes frayed or otherwise damaged.

•To avoid hazardous electric shock or laser radiation exposure, do not remove any covers or screws other than those specified in this manual.

•Turn off the power and disconnect the power plug (by pulling the plug, not the cable) if any of the following occurs:

•You spill something into the machine.

•You suspect that your machine needs service or repair.

•The external housing of your machine has been damaged.

•Do not incinerate used toner or toner containers. Toner dust might ignite when exposed to an open flame.

•Disposal can take place at our authorized dealer.

•Dispose of used toner containersin accordance with local regulations.

•Keep the machine away from flammable liquids, gases, and aerosols. A fire or an electric shock might occur.

•Connect the machine only to the power source described on the inside front cover of this manual.

•Do not damage, break or make any modifications to the power cord. Do not place heavy objects on it. Do not pull it hard nor bend it more than necessary.These actions could cause an electric shock or fire.

RCAUTION:

•Protect the machine from dampness or wet weather, such as rain and snow.

•Unplug the power cord from the wall outlet before you move the machine. While moving the machine, you should take care that the power cord will not be damaged under the machine.

•When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).

•Do not allow paper clips, staples, or other small metallic objects to fall inside the machine.

•Keep toner (used or unused) and toner containers out of reach of children.

•For environmental reasons, do not dispose of the machine or expended supply waste at household waste collection points. Disposal can take place at an authorized dealer.

•The inside of the machine could be very hot. Do not touch the parts with a label indicating the “hot surface”. Otherwise, an injury might occur.

•The fusing section of this machine might be very hot. Caution should be taken when removing misfed paper.

•Keep the machine away from humidity and dust. Otherwise a fire or an electric shock might occur.

•Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur.

•Do not use aluminum foil, carbon paper, or similar conductive paper to avoid a fire or machine failure.

•If you use the machine in a confined space, make sure there is a continuous air turnover.

•If toner or used toner is inhaled, gargle with plenty of water and move into a fresh air environment. Consult a doctor if necessary.

•If toner or used toner gets into your eyes, flush immediately with large amounts of water. Consult a doctor if necessary.

•If toner or used toner is swallowed, dilute by drinking a large amount of water. Consult a doctor if necessary.

•Avoid getting toner on your clothes or skin when removing a paper jam or replacing toner. If your skin comes into contact with toner, wash the affected area thoroughly with soap and water.

•If toner gets on your clothing, wash with cold water. Hot water will set the toner into the fabric and may make removing the stain impossible.

Ricoh 3035, DSm735, DSm745, IS 2235, IS 2245 User Manual

Positions of RWARNING and RCAUTION labels

This machine has labels for RWARNING and RCAUTION at the positions shown below. For safety, please follow the instructions and handle the machine as indicated.

ZKZH010E

ENERGY STAR Program

As an ENERGY STAR Partner, we have determined that this machine model meets the ENERGY STAR Guidelines for energy efficiency.

The ENERGY STAR Guidelines intend to establish an international energy-saving system for developing and introducing energy-efficient office equipment to deal with environmental issues, such as global warming.

When a product meets the ENERGY STAR Guidelines for energy efficiency, the Partner shall place the ENERGY STAR logo onto the machine model.

This product was designed to reduce the environmental impact associated with office equipment by means of energy-saving features, such as Low-power mode.

Low-Power mode and Off mode or Sleep mode

This product automatically lowers its power consumption when it is not operated for a fixed time (standard setting time: 1 minute). This is called “Off mode” on a single function copying machine, and “Sleep mode” on a multiple function machine equipped with optional facsimile and printing functions.

•Off mode: Same as the condition when the operation switch is turned off.

•Sleep mode: Same as the condition when the operation switch is turned off.

Receiving fax messages and printing from a computer are possible.

If you want to operate this product while it is in either of these modes, do one of the following:

•Turn on the operation switch.

•Place an original in the Auto Document Feeder (ADF).

•Lift and lower the exposure glass cover or the ADF.

The default interval before entering Off mode or Sleep mode can be adjusted. To change it, see p.58 “Auto Off Timer”.

The ENERGY STAR Program establishes two modes which lower the power consumption of the product when it is not operated for a fixed time. These modes are the Low-power mode and the Off mode or Sleep mode. This product has only one mode, the Off mode or Sleep mode. This mode meets the requirements of both the Low-power mode and Off mode or Sleep mode. In this manual, the Off mode is called the Auto Off mode.

Recycled Paper

In accordance with the ENERGY STAR Program, we recommend use of recycled paper which is environmentally friendly. Please contact your sales representative for recommended paper.

Duplex priority

One-sided→One-sided

Duplex Priority

The ENERGY STAR Program recommends the duplex function. By conserv-

ing paper resources this function is less of a burden to the environment. For applicable machines, duplex function (one-sided originals→ two-sided cop-

ies) can be selected preferentially when the operation switch or the main power switch is turned on, the {Energy Saver}key is pressed, or the machine resets automatically.

Reference

To change the settings of the Duplex Priority mode, see “Duplex Mode Priority”in “General Features 2/4”, Copy Reference.

Specifications

			Copier only		Fax, printer and scanner installed

		Type 1		Type 2	Type 1		Type 2

Low-power	Power con-		1.2 W			—
Mode, Off	sumption
Mode
Mode	Default interval		1 minute			—
	Default interval		1 minute			—

	Recovery	10 seconds or less				—
	time

Low-power	Power con-		—			8.4 W
mode, Sleep	sumption
mode
mode	Default interval		—			1 minute
	Default interval		—			1 minute

	Recovery		—		10 seconds or less
	time

Machine Types

This machine comes in two models which vary in copy speed. To ascertain which model you have, see the inside front cover.

	Type 1	Type 2

Copy speed	35 copies/minute	45 copies/minute
	(A4K, 81/2" × 11"K)	(A4K, 81/2" × 11"K)

1. Getting Started

Guide to Components

1. Exposure glass cover (optional) or Auto Document Feeder (ADF) (optional)

See p.17 “External Options”. (The illustration shows the ADF.)

2. Exposure glass

Place originals face down here for copying.

3. Internal tray

Copied, printed paper or fax messages are delivered here.

4. Main power switch

If the machine does not operate after turning on the operation switch, check the main power switch is turned on. See p.23 “Turning On the Power”.

5. Main power indicator

Lights when the main power switch is turned on, and goes off when the switch is turned off.

AHU014S

6. On indicator

Lights when the operation switch is turned on, and goes off when the switch is turned off.

7. Operation switch

Press to turn the power on (the On indicator lights up). To turn the power off, press again (the On indicator goes off). See p.23 “Turning On the Power”.

8. Control panel

See p.19 “Control Panel”.

9.Internal tray 2 (1 bin tray) (optional)

The indicator lights when paper is delivered to internal tray 2 (1 bin tray). If internal tray 2 has not been installed, the indicator does not light. See p.17 “External Options”.

10.Duplex unit (unit for two-sided copies)

Allows you to print on both sides of a piece paper in copier and printer function.

Getting Started

11. Front cover

Open to access the inside of the machine.

12. Paper tray (upper: Tray 1, lower: Tray 2)

1 Load paper here.

13. Paper tray unit (optional <upper: Tray 3, lower: Tray 4>)

1. Bypass tray

Use when copying onto OHP transparencies, adhesive labels, translucent paper, postcards, and custom size paper.

ZDSH020J

2. Right side cover

Open this when a paper jam occurs.

AHU009S

1. Ventilation holes

Prevent overheating. Do not obstruct the ventilation holes by placing objects near them or leaning things against them. If the machine overheats, a fault might occur.

Options

External Options

1. 1000-sheet finisher

Sorts, stacks, and staples copies. *1: Finisher upper tray

*2: Finisher shift tray

2.Exposure glass cover

Lower over originals for copying.

3.Auto Document Feeder

Place stacks of originals here. They will feed in automatically.

4. Internal tray 2 (1 bin tray)

If you select this as the output tray, copied paper will be delivered here face down.

5. Large Capacity Tray (LCT)

Holds up to 1,500 sheets of paper.

AHU005S

6.Paper tray unit

Consists of two paper trays.

7.Bridge unit

Relays copies to the finisher.

8. 2 Tray finisher

Sorts, stacks, and staples copies. You can also punch copies. (The Punch function is optional.)

*1: Finisher shift tray 1 *2: Finisher shift tray 2

9. Booklet finisher

Sorts, stacks, and staples copies. The saddle stitch function can staple the copies in the centre and folds them like a booklet. *1: Finisher upper tray

*2: Finisher shift tray *3: Finisher booklet tray

Getting Started

Internal Options

AFax unit

1Allows you to use the facsimile function.

BPrinter/Scanner unit

Allows you to use the printer and scanner functions.

CUser account enhance unit

Allows you to increase memory for storing user codes.

DFile format converter

Allows you to download documents stored using the copier and printer functions from the Document Server. See p.44 “Downloading Stored Documents”.

EIEEE 1394 interface board

Allows you to connect to an IEEE 1394 cable.

FIEEE 802.11b wireless LAN board

Allows you to install a wireless LAN interface.

GBluetooth unit

Allows you to expand the interface.

HIEEE 1284 Interface Board Connects to an IEEE 1284 cable.

IDataOverWriteSecurity Unit

Allows you to erase data on the hard disk.

JCopy Data Security Unit

If a document containing embedded text for unauthorized copy guard is copied, protected pages are grayed out in the copy.

Note

You cannot install two or more of the options below: IEEE 1394 interface board, IEEE 802.11b wireless LAN board, Bluetooth unit, IEEE 1284 interface board.

If the Copy Data Security Unit is installed in the machine, you cannot use the scanner and fax functions.

+ 166 hidden pages