Power Vent Kits for Gas Commercial Water Heaters
Power Venter (from Tjernlund)
Vent Terminal
Not for use with GN or GX models
Manufactured by Tjernlund Products,* Rheem-Ruud commercial gas water heater power vent kits are your best choice for new construction, electric-to-gas conversions and renovations.
Construction Features:
•Certified for use on natural and propane gas models.
•Maximum venting length up to 50 feet equivalent including the vent terminal.
•Vent terminal can be installed through combustible or non-combustible surfaces – heat shield is provided.
•Vent terminal is constructed from heavy-duty corrosion resistant aluminum.
•Venter can be connected to a vent termination on an exterior wall.
•Vibration isolators are supplied to provide quiet operation.
•Safety interlocks standard.
•Complete with mounting hardware.
•Venter is pre-wired with 40 feet of #18-4 copper wire (24 volt) to minimize field connections.
Certifications and Ratings:
•Power vent kits manufactured by Tjernlund Products, Inc. are tested and certified by AGA for use on Rheem-Ruud commercial gas water heaters.
*For technical assistance, please call the Tjernlund Help Line at
1-800-255-4208
Continued on reverse.