Renesas M3T-F160-100NSE, Converter Board M3T-F160-100NSE User Manual

Loading...
Renesas M3T-F160-100NSE, Converter Board M3T-F160-100NSE User Manual

M3T-F160-100NSE

Converter board for Connecting FLX160 to 100-pin 0.4-mm-pitch TQFP

User's Manual

Keep safety first in your circuit designs!

Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.

Notes regarding these materials

These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation, Renesas Solutions Corporation or a third party.

Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.

All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home page (http:// www.renesas.com).

When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability or other loss resulting from the information contained herein.

Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.

The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or reproduce in whole or in part these materials.

If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.

Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the products contained therein.

Precautions to be taken when using this product

This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your program you have finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing integration test, evaluation, or some experiment else.

In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.

Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge. However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any circumstances.

This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when used in Japan.

Renesas Tools Homepage http://www.renesas.com/en/tools

CAUTION

Rev.1.00

July 1, 2003

REJ10J0232-0100Z

If the requirements shown in the "CAUTION" sentences are ignored, the equipment may cause personal injury or damage to the products.

1. Outline

The M3T-F160-100NSE is a converter board for connecting the 160-core flexible cable FLX160 to a foot pattern for 100pin 0.4-mm-pitch TQFP (100PFB-A).

2. Package Components (See Figure 1)

 

(1) M3T-F160-100NSE converter board .......................

1

(2) YQPACK100SE (made by Tokyo Eletech Corporation) ......

1

(3) NQPACK100SE (made by Tokyo Eletech Corporation) ......

1

(4) YQ-GUIDE's ............................................................

4

(5) M3T-F160-100NSE User's Manual (this manual)

 

M3T-F160-100NSE YQPACK100SE

YQ-GUIDE's (x4)

NQPACK100SE

Figure 1 Package components

3. Specifications

Table 1 Specifications

Applicable package

100PFB-A (100-pin 0.4-mm-pitch TQFP)

 

 

Insertion/removal iterations of connector

50 times guaranteed

 

 

4. Usage (See Figure 2)

The M3T-F160-100NSE can be used for debugging and onboard evaluation in common by mounting the NQPACK100SE on the target system.

(1)For debugging

Mount the NQPACK100SE on the foot pattern of the target system and attach the YQPACK100SE on it. And connect the probe of the emulation pod to the upper connectors of the M3T-F160-100NSE. Then connect the YQPACK100SE and the M3T-F160-100NSE.

(2)For onboard evaluation

Mount an MCU with on-chip flash memory or one-time PROM and the HQPACK100SE (separately available) in that order on the NQPACK100SE on the target system.

Before using the M3T-F160-100NSE, be sure to read "7. Precautions" on page 4.

(1) For debugging

FLX160-PRB or M3xxxxTx-EPB

M3T-F160-100NSE

(2) For onboard evaluation

YQ-GUIDE's (x4)

HQPACK100SE (separately available)

YQPACK100SE

MCU with on-chip flash memory or one-time PROM

NQPACK100SE

100-pin 0.4-mm-pitch (100PFB-A) foot pattern

: Position of No. 1 pin

Be sure to align the pins.

Figure 2 Usage

( 2 / 4 )

+ 2 hidden pages