Renesas M30290T-80FPD, Converter Board M30290T-80FPD User Manual

Loading...

M30290T-80FPD

Converter Board for 80-pin 0.5-mm-pitch LQFP

User’s Manual

* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK and TQSOCKET are trademarks of Tokyo Eletech Corporation.

Keep safety first in your circuit designs!

zRenesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.

Notes regarding these materials

zThese materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation, Renesas Solutions Corporation or a third party.

zRenesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.

zAll information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home page (http://www.renesas.com).

zWhen using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, liability or other loss resulting from the information contained herein.

zRenesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.

zThe prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or reproduce in whole or in part these materials.

zIf these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.

zPlease contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the products contained therein.

Precautions to be taken when using this product

zThis product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your program you have finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing integration test, evaluation, or some experiment else.

zIn no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.

zRenesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge. However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any circumstances.

zThis product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when used in Japan.

 

 

CAUTION

If the requirements shown in the "CAUTION" sentences are ignored,

 

 

the equipment may cause personal injury or damage to the products.

 

 

 

 

Renesas Tools Homepage http://www.renesas.com/en/tools

Rev.1.00

August 16, 2004 (1/4)

REJ10J0389-0100Z

Renesas M30290T-80FPD, Converter Board M30290T-80FPD User Manual

1. Outline

The M30290T-80FPD is a converter board for connecting the emulation probe M30290T-EPB for M16C/26A, 28, 29 Groups and the compact emulator M30290T2-CPE to a foot pattern for M16C/28, 29 Group 80-pin 0.5-mm-pitch LQFP (80P6Q-A).

2. Package Components (See Figure 1)

(1)M30290T-80FPD (Base board M30290T-PTCB and 150-mm FFC cable included) 1 pc.

(2)YQPACK080SD (made by Tokyo Eletech Corporation) 1 pc.

(3)NQPACK080SD-ND

(made by Tokyo Eletech Corporation) 1 pc.

(4)YQ-GUIDE (made by Tokyo Eletech Corporation) 4 pcs.

(5)M30290T-80FPD User's Manual (This manual) 1 pc.

3. Specifications

Table 1 Specifications

Applicable package

80P6Q-A

(80-pin 0.5-mm-pitch LQFP)

 

 

Between M30290T-80FPD and

 

YQPACK080SD:

Insertion/removal

100 times guaranteed

iterations of

Between M30290T-EPB or

connector

M30290T2-CPE and

 

M30290T-80FPD:

 

50 times guaranteed

4. Usage (See Figure 2)

The M30290T-80FPD can be used for debugging and board mounted evaluation in common by mounting the NQPACK080SD-ND on the user system.

(1)For debugging

Mount the NQPACK080SD-ND and YQPACK080SD on the foot pattern of the user system in that order. And fix them with the YQ-GUIDE’s (do not use the screws included with the YQPACK080SD).

After connecting the M30290T-EPB or M30290T2-CPE and M30290T-80FPD, connect the M30290T-80FPD to the YQPACK080SD.

(2)For onboard evaluation

Mount an M16C/28, 29 Group MCU and HQPACK080SD (separately available) in that order on the NQPACK080SD-ND on the user system. And fix them using screw included with the HQPACK080SD.

Before using the M30290T-80FPD, be sure to read "7. Precautions" on page 4 and the M30290T-EPB or M30290T2-CPE Users Manual.

M30290T-80FPD

YQPACK080SD NQPACK080SD-ND YQ-GUIDE (x4)

Figure 1 Package components of the M30290T-80FPD

(1) Debugging

M30290T-EPB or

M30290T2-CPE M30290T-80FPD

M30290T-PTCB

(2) On-board evaluation

HQPACK080SD (separately available)

YQ-GUIDE (x4) *

MCU with on-chip

flash memory etc.

YQPACK080SD *

NQPACK080SD-ND *

80-pin 0.5-mm-pitch (80P6Q-A) foot pattern

●: No. 1 pin

*: These products are included with the M30290T-80FPD package.

Figure 2 Usage of the M30290T-80FPD

(2/4)

+ 2 hidden pages