®
®
TRIMMING
Use and Care Guide
NE-1, NE-3, NE-4, NEDH-2000, NEDH-2500
IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance, basic precautions should always be observed, including the following.
Read all instructions before using this appliance.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
■This appliance is for household use only.
■Close supervision is necessary when this appliance is used by, on, or near children or invalids.
■Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by Remington.
■Never drop or insert any object into any of the appliance’s openings.
■Do not use outdoors or operate where aerosol (spray) products are being used, or where oxygen is being administered.
■Always store this appliance in a moisture-free area. Do not store it in temperatures exceeding 140°F (60°C).
■Do not use this appliance with damaged or broken cutters, as injury may occur.
■Always remember to turn on the trimmer before you insert it into your nose or ear to avoid painfully snagging hairs.
■Never insert the trimmer more than 1/4”(6mm) into nose or ear. Foreign objects should not come into contact with the ear drum.
SAVE THESE INSTRUCTIONS
Contents |
|
English ......................... |
1 |
French........................... |
9 |
Product Features
Linear
Which model do you have?
|
Power System |
Cutting System |
Washable |
Flexing Body |
NE-1 |
Battery |
Linear |
No |
No |
NE-3 |
Battery |
Rotary |
Yes |
Yes |
NE-4 |
Battery |
Linear |
Yes |
No |
NEDH-2000 |
Battery |
Both |
Yes |
No |
NEDH-2500 |
Battery |
Both |
Yes |
No |
|
|
|
|
|
The NEDH-2500 features Titanium-coated blades on both attachments.
2 |
|
3 |
|
|
|
How To Use
All Remington® Nose and Ear trimmers run on one "AA" ALKALINE battery.
Inserting the Battery
1. To open the battery
1
compartment, turn the base of the unit approximately 1/4 inch counter clockwise and pull it off.
2. Insert the battery |
2 |
|
into the unit, positive |
|
|
end first. |
|
|
3. Replace the base |
|
|
and turn it 1/4 inch |
|
|
clockwise to lock |
3 |
|
it in place. |
||
|
||
Battery cautions |
|
|
■ Use of non-alkaline |
|
|
batteries will hurt |
|
|
the unit’s operating |
|
|
performance. |
|
|
■ Batteries should not |
|
|
be left in the unit if |
|
|
the unit is not in use |
Unlocked Locked |
|
for long periods. |
|
■To prevent battery corrosion, the unit should be kept in a dry environment.
■Dead batteries should be removed immediately and disposed of properly.
■Do not use recharged batteries with this appliance. The lower voltage in recharged batteries impairs the performance of the cutting unit.
Changing the Heads on the NEDH-2000 and NEDH-2500
The NEDH-2000 and NEDH-2500 come with interchangeable heads. You many want to use the rotary head to trim nose hairs, and the linear head for ear and eyebrow hairs.
To change heads:
1.Turn the trimmer off.
2.Detach cutting head by turning it counter clockwise to the unlocked position and pulling it off.
3.Once the previous head is removed, attach the other head by placing it on top of the unit and turning it clockwise to the locked position.
Locked Unlocked
Cleaning & Maintenance
Your nose and ear trimmer is designed to give you years of comfortable use. To ensure that you get optimal performance from your trimmer, follow these simple cleaning and lubrication tips:
Cleaning Your Trimmer
After each use, brush or blow accumulated hair from the cutting unit.
Rinsing your trimmer
■The NE-3, NE-4, NEDH-2000, and NEDH-2500 can also be rinsed with cool or warm water. Just hold the unit’s head under the faucet — it is not necessary to remove the head first.
Do not use hot water.
■If the trimmer needs additional cleaning, the cutting head can be removed by turning it 1/4 inch to the right and pulling it off. Then blow out the accumulated hair or rinse it more thoroughly under running water.
■Afterward, shake excess water from the cutter head, making sure that all parts are held together.
■Replace the head in the same position as it was removed, turning it 1/4 inch counter clockwise until it locks
into place.
! The NE-1 cannot be rinsed.
Lubricating the cutters
■After rinsing the unit, apply a drop or two of mineral oil or baby oil to the cutting teeth.
■Don’t apply too much oil, or it may spray.
■Finally, point the trimmer down and away from you, and turn it on. This spreads the oil evenly and expels any excess.
4 |
|
5 |
|
|
|
Loading...