RECTRON UFM106, UFM105, UFM104, UFM103, UFM101 Datasheet

RECTRON		UFM101
		THRU
SEMICONDUCTOR

TECHNICAL SPECIFICATION

UFM106

SURFACE MOUNT GLASS PASSIVATED

SUPER FAST SILICON RECTIFIER

VOLTAGE RANGE 50 to 400 Volts CURRENT 1.0 Ampere

FEATURES

*Glass passivated device

*Ideal for surface mounted applications

*Low leakage current

*Metallurgically bonded construction

*Mounting position: Any

*Weight: 0.057 gram

MECHANICAL DATA

* Epoxy : UL flammability classification 94V-0

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.

																												DO-214AC
			0.067 (1.70)
																										0.110 (2.79)
			0.051 (1.29)																									0.086 (2.18)
										0.180(4.57)
										0.160(4.06)
																							0.012 (0.305)
0.091 (2.31)																										0.006 (0.152)
		0.067 (1.70)
	0.059 (1.50)																						0.008 (0.203)
0.035 (0.89)																							0.004 (0.102)
									0.209 (5.31)
										0.185 (4.70)

Dimensions in inches and (millimeters)

MAXIMUM RATINGS (At TA = 25oC unless otherwise noted)

RATINGS		SYMBOL	UFM101	UFM102		UFM103	UFM104	UFM105		UFM106	UNITS
Maximum Recurrent Peak Reverse Voltage		VRRM	50	100		150	200	300		400	Volts
Maximum RMS Volts		VRMS	35	70		105	140	210		280	Volts
Maximum DC Blocking Voltage		VDC	50	100		150	200	300		400	Volts
Maximum Average Forward Current		IO					1.0				Amps
at TA = 55oC
Peak Forward Surge Current IFM (surge): 8.3 ms single half		IFSM					30				Amps
sine-wave superimposed on rated load (JEDEC method)
Typical Junction Capacitance (Note 2)		CJ		15				10			pF
Operating and Storage Temperature Range		TJ, TSTG				-65 to + 175					0 C
ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted)
CHARACTERISTICS		SYMBOL	UFM101	UFM102		UFM103	UFM104	UFM105		UFM106	UNITS
Maximum Forward Voltage at 1.0A DC		VF		0.92				1.20			Volts
Maximum DC Reverse Current	@TA = 25oC	IR				5.0					uAmps
at Rated DC Blocking Voltage	@TA =150oC					50
Maximum Reverse Recovery Time (Note 1)		trr				20					nSec
NOTES : 1. Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A.											2001-2

2. Measured at 1 MHZ and applied reverse voltage of 4.0 volts.