Raymarine C90W, C120W , C140W Installation And Operator's Manual

C-Series Widescreen

Multifunction Display

Quick reference guide

C90W, C120W and C140W models

86135-1

Safetynotices

Adjustingthebacklight

Warning:Ensuresafenavigation

Thisproduct(includingtheelectroniccharts)is
intendedforuseonlyasanaidtonavigation.Itis
designedtofacilitatetheuseofofcialgovernment
charts,NOTREPLACETHEM.Onlyofcial
governmentchartsandnoticestomarinerscontainall
thecurrentinformationneededforsafenavigation,
andthecaptainisresponsiblefortheirprudentuse.It
istheuser’sresponsibilitytouseofcialgovernment
charts,noticestomariners,cautionandproper
navigationalskillwhenoperatingthisoranyother
Raymarineproduct.

Poweringthedisplayon

1.PressandholdthePOWERbuttonuntiltheRaymarinelogo
appears.

2.PressOKtoacknowledgethewarningwindow.

PoweringtheDisplayOff

1.PressandholdthePOWERbuttonuntilthecountdownreaches
zero.

Note:IfthePOWERbuttonisreleasedbeforethecountdown
reacheszero,thepoweroffiscancelled.

1.PressthePOWERbutton.

Thebacklightlevelmeterisdisplayed.

2.Usingtherotarycontol,adjustthebacklighttotheappropriate
level.

Simulatormode

TheSimulatormodeenablesyoutopracticeoperatingyourdisplay
withoutdatafromaGPSantenna,radarscanner,shnderorAIS
receiver.

TheSimulatormodeisswitchedon/offintheSystemSetupMenu.
Onceenabled,youcanusetheSimulator:

•Beforeinstallation:Connectthedisplaytoa12VDCpower

supply,fusedat1ampbyattachingtheredcorefromthepower
leadtopositive(+)andtheblackcoretonegative(-).

•Afterinstallation:Whilstinamarinaoratanchor.

Note:IncomingAISsafetymessagescannotbedisplayedwhile
thedisplayisinSimulatormode.

Note:AnysystemsettingsmadewhilstinSimulatormodearenot
transmittedviaSeaTalktootherequipment.

Enablingthesimulatormode

1.PressMenu.

2.SelecttheSystemSetupmenu.

3.SelecttheSimulatoritem,andchangeitsvaluetoOn.

3

Screeninformation

Status bar

•

Gives information specific to

each application.

•

Cannot be edited or moved.

Databar

•

Gives information associated with

your vessel or the environment.

•

Customizable content.

•

Vertical or horizontal format.

•

Display or hide.

•

Normal or large size.

Database lists

•

Include information you have added to the

display's memory, such as waypoints.

•

Highlight an entry using trackpad or rotary

control to display related information.

•

Editable using softkeys.

Pop-up messages

•

Alert you to a situation, such as an alarm,

or unavailable function.

•

Not editable.

•

May require a response. For example,

ACKNOWLEDGE to silence alarms.

Dialog boxes

Enable data to be edited or entered into a
store/list e.g. editing a waypoint.

Status icons

Confirm status of

Sounder, GPS, AIS and
Autopilot.

4

Controls

Unicontrol™

The smooth inner ring is the TRACKPAD,
which controls the on-screen cursor and
scrolls through menus. The outer ring is
the ROTARY CONTROL, which is used to
adjust values. In the middle of the Unicontrol
is the OK button, which is used to select options.

ACTIVE

Selects which of the split windows
is active. The selected window is
outlined in red, and the associated
softkeys displayed.

MENU

Press to access the
set up menus.

RANGE

Press to change the display scale
so that a smaller or larger area can
be seen on the screen.

PAGE

Press to display the available page
softkeys for the current page set.
Press and hold to access the Page
Setup menu.

WPTS/MOB

Press and release to show the waypoint
softkeys. Press again to place a waypoint
at your vessel's position. Press and hold
to place a Man Overboard (MOB) marker
at your current position.

DATA

Press to access the archive and transfer,
and databar options.

CANCEL

Press to quit the selected on-screen option
when editing data, or to return to a previous
softkey or menu level.

Chart card slot

Open the card reader door to
insert or remove CompactFlash
cards, which are used for
upgrading cartography,
and archiving waypoint,
route and other data.

Softkeys

Press to select the corresponding function identified by the on-screen label.

1

2

3

4

5 6

7

8

9

10

1

2

3

4

5

6

7

8

9

11

11

POWER

Press once to switch the unit ON. Press again
to access the backlight adjustment and scanner
power controls. Press and hold to switch the
unit OFF.

5

Applications

•

Locate where you are.

•

Interpret your surroundings.

•

Monitor where you are going.

•

Record where you have been.

•

Navigate to a specified position (waypoint).

•

Build and navigate routes.

•

View details of nearby features & services.

•

View details of boats equipped with AIS.

•

Measure distances and bearing

s.

•

See where the fish are.

•

Identify underwater objects.

•

View seabed structure.

•

View sea depth and temperature data.

•

Mark points of interest, like fishing spots

or wrecks

•

Detect and track targets.

•

Avoid collisions.

•

Measure distances and bearings.

•

Place waypoints.

•

Display details of targets (MARPA).

•

Trigger an alarm when a target is in zone.

•

Display the identity of other vessels (AIS).

TheC-Seriesmultifunctiondisplayincludesanumberof
applications:

Chartplotter

6

Fishnder

Radar

Otherapplications

Page set

Pag e

(consists of 1, 2,
3 or 4 windows)

Window

D8928_1

CDIChart

Radar

Fishfinder

Engine

monitor

Data

Inadditiontothecoreapplicationsdescribedabove,your
multifunctiondisplayalsoincludesthefollowingapplications:

•3Dchart—aneasy-to-usechartformatprovidingathree
dimensionalgraphicalviewoflandandseacontoursaroundyour
vessel.The3Dchartapplicationrequiresupgradedcartography.

•Data—displayssystemandinstrumentdataonyourmultifunction
display.

•Engine—enablesyoutoviewinformationintheformofgauges
anddigitaldata,fromuptothreecompatibleengines.

•CourseDeviationIndicator(CDI)—providesagraphical
representationofyourvessel’scourseina‘rollingroad’format.

•Siriusweather(NorthAmericaonly)—overlayshistorical,live,
andforecastedweathergraphicsonaworldmap.

•Siriusradio(NorthAmericaonly)—useyourmultifunction
displaytocontrolaconnectedSiriusSatelliteRadioreceiver.

Displayingapplications

Thevariousapplicationsthatmakeupyourmultifunctiondisplay
areshowninaseriesofscreensknownaspagesets.Thereare
4pre-conguredandoneemptypagesettochoosefrom.Each
pagesetcontains5pages.Thesepagesaremadeupof1,2,3or
4windowscombinedinvariousformats.Eachwindowcandisplay
anapplication:

Ifrequired,youcanchangethecombinationandlayoutofthese
pagesetstomeetyourparticularneeds.

Selectingapagesetandapplicationpage

1.PressandholdthePAGEbuttonuntiltheSelectPageSetdialog
appears.

2.Usingthetrackpad,highlighttherequiredpageset.

3.PresstheOKbuttontoselectthehighlightedpageset.An
applicationpagefromthatpagesetisdisplayed.

4.PressthePAGEbuttonrepeatedlytotogglebetweenthe
availableapplicationpagesinthepageset.Alternatively,usethe
appropriatesoftkeytoselecttherelevantapplicationpage.

Selectinganapplicationwindow

1.Whenmorethanoneapplicationisdisplayedatanyonetime,
theactiveapplicationwindowishighlightedwitharedborder:

2.PresstheACTIVEbuttontomovetheredbordertoanother
windowonthescreen.

3.PressandholdtheACTIVEbuttontoswitchthecurrently
highlightedwindowtofull-screenmode.

7

4.PressandholdtheACTIVEbuttontoreturnthescreento
split-windowmode.

Note:ToobtainaMOBposition,yourmultifunctiondisplaymust
haveaGPSpositionx.

Emergenciesandwarnings

Youcanuseyourmultifunctiondisplaytomarkthepositionofaman
overboard(MOB),ortosoundanalarmwhenaparticularsituation
occurs.

Anexampleiswhenadepthlimitisreached,oraspeciedperiodof
timehaselapsed.

Manoverboard

Ifyouloseapersonorobjectoverboard,youcanusetheMan
Overboard(MOB)functiontoreturntothespot.

TheMOBfunctionisavailableatalltimesonyourmultifunction
display,regardlessofwhichapplicationisrunning.

Activatingthemanoverboardfunction

CancellingaMOBalarm

1.PressandholdtheWPTS/MOBbuttonforfourseconds.

OncetheMOBalarmiscleared:

•thechartapplicationmotionmodeisreset.

•thedatabarmodeisreset.

•GOTOandroutefunctionsarerestored.

Alarms

Alarmsareusedtoalertyoutoasituationorhazardrequiringyour
attention.

Whenanalarmsounds,amessagedialogisdisplayed,explaining
thereasonforthealarm.

Cancellingalarms

1.PresstheACKNOWLEDGEsoftkey.

1.PressandholdtheWPTS/MOBbuttonforthreeseconds.

8

Raymarine plc

Anchorage Park, Portsmouth,
Hampshire PO3 5TD,
United Kingdom.

Tel: [phone]
Fax: [phone]

www.raymarine.com

Raymarine Inc.

21 Manchester Street, Merrimack,
New Hampshire 03054-4801,
USA.

Tel: [phone]
Fax: [phone]

www.raymarine.com