STC-TGL2M / STC-TGL4M / STC-TGL5M
User’s Manual
Toll Free Customer Support 1-888-304-6125
www.wildviewcam.com
Version 1.3 |
06/07 |
Wildview Series
For Customer Service or Warranty Information Call Toll Free
888-304-6125
WILDVIEW
P.O. Box 535189
Grand Prairie, Texas 75053-5189
Wildview Limited Warranty
Your Wildview scouting camera is covered by a 90 days Limited Warranty on parts and labor from the date of original purchase, and purchases must be made through an authorized dealer. The warranty covers defects in workmanship and materials. The warranty does not apply to units, which have been damaged or abused intentionally or unintentionally. A purchase from individuals or unauthorized internet sites voids the warranty.
Tampering with or altering the unit will void the warranty. Any unauthorized service will void warranty. Original sales receipt must be produced for any warranty service and a Return Authorization (RA) number must be obtained from customer service at 888-304-6125 prior to returning product
www.wildviewcam.com |
Toll Free 888-304-6125 |
2 |
Wildview Series
Manual Contents
Camera overview |
|
4 |
|
Camera kit contents |
|
6 |
|
Battery and memory Installation |
6 |
|
|
Definition |
|
10 |
|
Programming |
|
11 |
|
Mounting the camera |
|
14 |
|
Viewing images |
|
18 |
|
Saving and Deleting images |
21 |
|
|
Memory compatibility chart |
24 |
|
|
Technical Specs |
|
25 |
|
General Information |
|
28 |
|
Image Capacity Chart |
|
30 |
|
www.wildviewcam.com |
Toll Free 888-304-6125 |
3 |
|
Wildview Series |
|
|
Camera overview |
|
Front view |
Side view |
www.wildviewcam.com |
Toll Free 888-304-6125 |
4 |
Wildview Series
Open view image with major parts indication
www.wildviewcam.com |
Toll Free 888-304-6125 |
5 |
Wildview Series
Camera kit contents
•Wildview series Digital Scouting Camera
•Camera driver
•User Manual
•USB cable
•Strap
Battery & memory installation
Warning: Do not use a different Voltage lead acid battery other than the one specified in this section. Doing so will damage the camera and will void the warranty.
The Wildview Digital Scouting Camera is designed to operate using alkaline batteries for optimum performance.
www.wildviewcam.com |
Toll Free 888-304-6125 |
6 |
Wildview Series
NOTE: Always have camera in the OFF position when installing or removing batteries.
Batteries “C” cell
The internal battery compartment accepts 4 “C” cell batteries. Be sure to use high quality brand name alkaline batteries. Install batteries with correct polarity (+/-) as noted inside the battery compartment.
12V Lead Acid external battery
The Wildview Scouting Camera is equipped with an external power jack designed to accept a barrel plug cable to attach to a sealed lead acid battery. (sold separately). Battery cable and complete 12V Lead Acid battery kits are available wherever Wildview scouting cameras are sold or call toll free 888-304-6125. Only Wildview external battery accessories are recommended.
•Insert the battery pack plug into the DC 12V jack at the bottom of camera housing
•Turn on the camera by sliding the power switch to PIR position
www.wildviewcam.com |
Toll Free 888-304-6125 |
7 |
Wildview Series
Please make sure the voltage and polarity (+/-) are correct before connection. Incorrect voltage or polarity (+/-) will damage the camera.
Memory Options
Your Wildview scouting camera is equipped with the following:
Model |
SDRAM |
STC-TGL2M |
16MB |
STC-TGL4M |
32MB |
STC-TGL5M |
32MB |
The camera is also equipped with an expandable media card slot capable of accepting up to 2GB* SD card (sold separately). With no memory card inserted into the slot, the camera will use the built in SDRAM memory to store images. If an SD card is inserted into the slot then the camera will bypass the built in memory and utilize the SD memory. The front counter display will show the number
www.wildviewcam.com |
Toll Free 888-304-6125 |
8 |
Wildview Series
of images on the built in memory unless the expansion card is inserted at which point the front counter will only display the number of images stored in the expansion card.
Inserting SD card
Make sure camera is in the OFF position whenever adding or removing memory.
•Insert SD memory card in to the SD card slot completely and in the correct direction as shown on the inside of the housing.
•To remove the SD memory card, depress the SD card and pull out the card gently.
SD cards must be clean (no images from other sources.)
www.wildviewcam.com |
Toll Free 888-304-6125 |
9 |
Wildview Series
Definition
• Time out: To set the amount of preset time in minutes the camera will sleep between PIR triggering
• Resolution: The resolution selection that you have selected.
Model |
Hi |
Low |
STC-TGL2M |
2.0M |
0.3M |
STC-TGL4M |
4.0M |
1.3M |
STC-TGL5M |
5.0M |
3.0M |
• Date/Time: To set date and time stamp in the picture
• Flash: Auto / On / Off mode
• Burst: To set the number of pictures the camera will
take per PIR triggering |
|
|
|
o |
1P: Single image capturing per PIR triggering |
|
|
o |
2P: Two images continuous capturing per PIR |
||
|
triggering |
|
|
www.wildviewcam.com |
Toll Free 888-304-6125 |
10 |