Quoizel ER353BN Emery User Manual

1.03 Mb
Loading...

Quoizel, Inc.

6 Corporate Parkway

Goose Creek, SC 29445

Customer Service Phone 631.273.2700 Fax 631.231.7102 www.quoizel.com

Assembly Instruction Sheet #IS-ER353BN

For Style ER353BN

Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers,electrical tape, safety glasses.

Bulb Recommended: (3)Medium Base 100W bulbs Maximum,Alternate bulb (3) 23W CFLMaximum.

EstimatedAssembly Time: 30-45 minutes

Preparation: Identify and inspectall parts before beginning installation. Check package content list and diagrams below to be sure all parts are present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contactcustomer service forreplacement parts.

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject glass parts to any shock while in operation or shattering may result.

Package Contents

D

Upper Collar

 

 

x 3

 

A

Fixture Loop

 

E

Shade

 

x 2

 

 

x 3

 

 

 

 

F

Steel Collar

 

B

6” Rod

x 3

 

 

 

 

 

 

x 4

 

 

 

 

 

 

 

 

Harp with

 

 

 

 

G Socket Collar

 

 

 

 

 

x 3

 

C

12” Rod

 

 

Nipple

 

 

x 4

 

 

H

x 3

 

 

 

 

 

I

Flat Washer

 

 

 

 

x 3

 

 

 

 

 

J

Rubber Washer

 

 

 

 

 

x 3

 

 

 

 

 

K

Hex Nut

 

 

 

 

 

x 6

 

 

 

 

 

 

L

Diffuser

 

 

 

 

 

x 3

 

 

 

 

 

 

 

 

Lock Screw

M

Small Flat

 

O

Washer

 

 

 

x 2

 

 

x 3

 

 

 

 

 

 

 

 

 

P

Cap A

N

Finial

 

 

 

 

x 2

 

x 3

 

 

 

Q

Cap B

 

 

 

 

 

x 2

 

 

 

 

 

 

 

 

Socket

 

 

 

 

 

R

Assembly

 

 

 

 

 

x 1

 

Hardware Contents

Ceiling

BB Canopy

 

 

x 1

 

 

 

Fixture Chain

 

 

CC x 2

 

Crossbar

 

Quick Link

AA Assembly

 

DD x 4

 

x 1

 

 

 

STEP 1 - Attach Caps to Socket

R

Q

O

Assembly

A. Attach the Caps (P/Q) to the ends of the Socket Assembly (R) and secure with the

Lock Screws (O). Hand tighten until snug.

P

Figure 1

STEP 2 - Assemble the Rods and the Fixture Loop

A.Determine the Rods (B/C) to be assembled to the Socket Assembly

(R) according to your hanging height.

B.Pass the supply wires and ground wire through the chosen rods (B/C) and the Fixture Loop (A). Thread the Socket Assembly (R), the chosen Rods (B/C) and the Fixture Loop (A) together. Hand tighten until snug.

Figure 2

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B

 

 

 

 

 

 

 

 

 

 

 

 

 

Supply Wires

 

B

 

 

 

 

C

 

 

 

 

 

 

 

 

 

 

 

and Ground Wire

C

R

 

Thank you for purchasing a Quoizel product.

 

 

Need assistance withparts or assembly? Call Quoizel customerservice at 1-631-273-2700

 

2014 QuoizelInc.

orvisitus on-line at www.quoizel.com

March2014

 

 

1of3

 

+ 2 hidden pages