pASIC HIGHLIGHTS
…2,000 usable ASIC gates,
88 I/O pins
QL12x16B
Block Diagram
192 Logic Cells
QL12X16B
pASIC® 1 Family
Very-High-Speed CMOS FPGA
Rev C
Very High Speed – ViaLink ® metal-to-metal programmable–via antifuse technology, allows counter speeds over 150 MHz and logic cell delays of under 2 ns.
High Usable Density – A 12-by-16 array of 192 logic cells provides 2,000 usable ASIC gates (4,000 PLD gates) in 68-pin and 84-pin PLCC, 84-pin CPGA and 100-pin TQFP packages.
Low-Power, High-Output Drive – Standby current typically 2 mA. A 16-bit counter operating at 100 MHz consumes less than 50 mA. Minimum IOL of 12 mA and IOH of 8 mA
Low-Cost, |
Easy-to-Use Design Tools |
– |
Designs |
entered and |
4 |
simulated |
using QuickLogic's new QuickWorks® |
development |
|||
environment, or with third-party CAE tools including Viewlogic, |
pASIC |
||||
Synopsys, Mentor, Cadence and Veribest. Fast, fully automatic place |
|||||
and route |
on PC and workstation platforms using |
QuickLogic |
|||
software. |
|
|
|
|
1 |
|
|
|
|
|
= Up to 80 prog. I/O cells, 6 Input high-drive cells, 2 Input/Clk (high-drive) cells
4-13
QL12x16B
PRODUCT SUMMARY
FEATURES
The QL12x16B is a member of the pASIC 1 Family of very-high-speed CMOS user-programmable ASIC devices. The 192 logic cell fieldprogrammable gate array (FPGA) offers 2,000 usable ASIC gates (4,000 usable PLD gates) of high-performance general-purpose logic in a wide variety of package configurations.
Low-impedance, metal-to-metal, ViaLink interconnect technology provides nonvolatile custom logic capable of operating above 150 MHz. Logic cell delays under 2 ns, combined with input delays of under 1.5 ns and output delays under 3 ns, permit high-density programmable devices to be used with today’s fastest microprocessors and DSPs.
Designs can be entered using QuickLogic’s Quick Works Toolkit or most populart third-party CAE tools. QuickWorks combines Verilog/VHDL design entry and simulation tools with device-specific place & route and programming software. Ample on-chip routing channels allow fast, fully automatic place and route of designs using up to 100% of the logic and I/O cells, while maintaining fixed pin-outs.
Total of 88 I/O pins
–80 Bidirectional Input/Output pins
–6 Dedicated Input/High-Drive pins
–2 Clock/Dedicated input pins with fanout-independent, low-skew clock networks
Input + logic cell + output delays under 6 ns
Chip-to-chip operating frequencies up to 110 MHz
Internal state machine frequencies up to 150 MHz
Clock skew < 0.5 ns
Input hysteresis provides high noise immunity
Built-in scan path permits 100% factory testing of logic and I/O cells and functional testing with Automatic Test Vector Generation (ATVG) software after programming
Available in 68-pin and 84-pin PLCC, 84-pin CPGA and 100-pin TQFP packages
68-pin PLCC compatible with QL8x12B
84-pin PLCC compatible with QL16x24B
100-pin TQFP compatible with QL8x12B and QL16x24B
0.65µ CMOS process with ViaLink programming technology
4-14
QL12x16B
Pinout
Diagram
68-pin PLCC
4 |
1 pASIC
Pinout
Diagram
84-pin PLCC
Pins identified I/SCLK, SM, SO and SI are used during scan path testing operation.
4-15