Quatech ABDB-ET, WLNB-ET, WLNG-ET, ABDG-ET, T802.11b-g User Manual

0 (0)

AirborneDirect™PP Ethernet Bridge

User’s Guide

T

802T .11b/g ABDG-ET Series WLNG-ET Series

802.11b ABDB-ET Series WLNB-ET Series

Document number 100-8007-141G

Quatech, Inc. Confidential

ALL RIGHTS RESERVED. No part of this publication may be copied in any form, by photocopy, microfilm, retrieval system, or by any other means now known or hereafter invented without the prior written permission of Quatech, Inc. This document may not be used as the basis for manufacture or sale of any items without the prior written consent of Quatech, Inc.

AirborneDirect™ is a trademark of Quatech, Inc.

All other trademarks used in this document are the property of their respective owners.

Copyright © 2005-2007 Quatech, Inc

Disclaimer

The information in the document is believed to be correct at the time of print. The reader remains responsible for the system design and for ensuring that the overall system satisfies its design objectives taking due account of the information presented herein, the specifications of other associated equipment and the test environment.

Quatech, Inc has made commercially reasonable efforts to ensure that the information contained in this document is accurate and reliable. However, the information is subject to change without notice. No responsibility is assumed by Quatech, Inc for the use of the information, nor for infringements of patents or other rights of third parties. This document is the property of Quatech, Inc. and does not imply license under patents, copyrights or trade secrets.

Quatech, Inc. Headquarters

QUATECH Inc..

5675 Hudson Industrial Parkway

Hudson, OH 44236

USA

Telephone:

330-655-9000

Toll Free:

800-553-1170

Fax:

330-655-9010

Email:

sales@quatech.com

 

support@quatech.com

Web Site:

www.quatech.com

 

 

CONTENTS

CHAPTER 1 INTRODUCTION................................................................................................................................

1

FT EATURES AND BENEFITST............................................................................................................................

 

2

SAMPLE APPLICATION..................................................................................................................................

 

3

UT SING THIS DOCUMENTT...............................................................................................................................

 

4

CONVENTIONS.............................................................................................................................................

 

5

Terminology ..........................................................................................................................................

 

5

NotesT .....................................................................................................................................................

 

5

CautionsT ................................................................................................................................................

 

5

RELATED DOCUMENTATION..........................................................................................................................

 

6

CHAPTER 2 HARDWARE INSTALLATION ........................................................................................................

7

STANDARD PACKAGE CONTENTS ..................................................................................................................

7

STANDARD PACKAGE HARDWARE DESCRIPTION ............................................................................................

9

Reset Switch .........................................................................................................................................

 

9

Indicator LEDs.....................................................................................................................................

 

10

Mounting Cradle..................................................................................................................................

 

12

HEAVY-DUTY PACKAGE .............................................................................................................................

 

13

Indicator LEDs.....................................................................................................................................

 

15

SELECTING A LOCATION.............................................................................................................................

 

16

CONNECTING THE BRIDGE..........................................................................................................................

 

17

CHAPTER 3 INITIAL CONFIGURATION............................................................................................................

19

WIRELESS CONFIGURATION........................................................................................................................

 

19

VERIFYING YOUR CONNECTIONS ................................................................................................................

21

WPA-LEAP SECURITY..............................................................................................................................

 

22

System Requirements.........................................................................................................................

 

22

Computer Resource Requirements ....................................................................................................

22

System Implementation Considerations .............................................................................................

22

CHAPTER 4 AIRBORNE CONTROL CENTER.................................................................................................

25

LAUNCHING THE ACC ................................................................................................................................

 

25

NAVIGATING AROUND THE ACC ...................................................................................................................

27

PERFORMING CONFIGURATION ACTIVITIES..................................................................................................

27

SAVING CONFIGURATION CHANGES............................................................................................................

29

BASIC CONFIGURATION SETTINGS ..............................................................................................................

30

Status Page (Basic Configuration Settings)........................................................................................

30

Miscellaneous Settings Page (Basic Configuration Settings).............................................................

31

ADVANCED CONFIGURATION SETTINGS.......................................................................................................

41

Services Page (Advanced Configuration Settings).............................................................................

41

Security Settings Page (Advanced Configuration Setting) .................................................................

43

Update Firmware Page (Advanced Configuration Settings)...............................................................

45

Reset Page (Advanced Configuration Settings) .................................................................................

48

CHAPTER 5 TROUBLESHOOTING....................................................................................................................

50

TROUBLESHOOTING SUGGESTIONS ............................................................................................................

50

LED TROUBLESHOOTING ...........................................................................................................................

 

52

APPENDIX A SPECIFICATIONS ..........................................................................................................................

53

APPENDIX B FCC COMPLIANCE........................................................................................................................

59

FCC STATEMENT ..................................................................................................................................

 

59

FCC RF EXPOSURE STATEMENT........................................................................................................

59

INFORMATION FOR CANADIAN USERS (IC NOTICE)......................................................................................

59

MANUFACTURERS DECLARATION OF CONFORMITY .....................................................................................

60

100-8007-141G

AirborneDirect™ Ethernet Bridge User's Guide

Page i

Quatech, Inc. Confidential

Contents

 

INDUSTRY CANADA NOTICE (APPLICABLE TO USE WITHIN CANADA) .............................................................

60

AVIS DE CONFORMITE A LA REGLEMENTATION D’INDUSTRIE CANADA............................................................

61

INDUSTRY CANADA (IC) EMISSIONS COMPLIANCE STATEMENT.....................................................................

61

AVIS DE CONFORMITE A LA REGLEMENTATION D’INDUSTRIE CANADA............................................................

61

EUROPEAN COMMUNITY—CE NOTICE........................................................................................................

61

......................................................................................................................................................

61

.............................................................................................................................................................

62

GLOSSARY...............................................................................................................................................................

65

INDEX.........................................................................................................................................................................

69

Page ii

AirborneDirect™ Ethernet Bridge User's Guide

100-8007-141G

Quatech, Inc. Confidential

 

 

Contents

 

LIST OF FIGURES

Figure 1.

Basic Application Involving a LAN Host and Ethernet Client ........................................

3

Figure 2.

AirborneDirect™ Ethernet Bridge Hardware (standard package).................................

9

Figure 3.

Indicator LEDs on the AirborneDirect™ Ethernet Bridge............................................

10

Figure 4.

Mounting Cradle Dimensions......................................................................................

12

Figure 5. AirborneDirect™ Ethernet Bridge Hardware (heavy-duty package) ............................

13

Figure 6. AirborneDirect™ Heavy-Duty Cable (Evaluation Kit Item)...........................................

14

Figure 7. End Cap Pin-out and Connector Location ...................................................................

15

Figure 8.

Device detection .........................................................................................................

25

Figure 9.

Device login ................................................................................................................

26

Figure 10.

Status Page ..............................................................................................................

26

Figure 11. ACC Navigation Bar..................................................................................................

27

Figure 12.

Saved Settings Screen .............................................................................................

29

Figure 13.

Reset Notice Screen.................................................................................................

29

Figure 14.

Status Page ..............................................................................................................

30

Figure 15. Miscellaneous OEM Settings Page ..........................................................................

31

Figure 16.

Wireless Network Configuration Page ......................................................................

33

Figure 17.

Network Services Page ............................................................................................

41

Figure 18.

Security Configuration Page .....................................................................................

43

Figure 19. Update Firmware Page.............................................................................................

45

Figure 20.

Precautionary Message ............................................................................................

46

Figure 21. Update Complete Message ......................................................................................

47

Figure 22. Reset Page ...............................................................................................................

48

Figure 23. Confirm Restart..........................................................................................................

49

Figure 24.

Reset In Progress .....................................................................................................

49

100-8007-141G

AirborneDirect™ Ethernet Bridge User's Guide

Page iii

Quatech, Inc. Confidential

Contents

 

 

 

LIST OF TABLES

Table 1.

AirborneDirect™ Ethernet Bridge Features and Benefits ..............................................

2

Table 2.

AirborneDirect™ Ethernet Bridge Indicator LEDs.......................................................

11

Table 3. AirborneDirect™ Heavy-Duty Ethernet Bridge Indicator LEDs .....................................

15

Table 4. Recording Information from Your Access Point’s Configuration Application ................

20

Table 5.

Miscellaneous OEM Settings .......................................................................................

32

Table 6.

Wireless Network Configuration Settings.....................................................................

35

Table 7. Region Country Codes.................................................................................................

40

Table 8.

Network Services Settings ...........................................................................................

42

Table 9.

Security Configuration Settings....................................................................................

44

Table 10.

Troubleshooting Suggestions ....................................................................................

50

Table 11.

Indicator LED Troubleshooting ..................................................................................

52

Table 12.

Specifications.............................................................................................................

53

Table 13. Heavy-Duty Power Supply Specifications...................................................................

58

Table 14. Heavy-Duty DC Specifications....................................................................................

58

Page iv

AirborneDirect™ Ethernet Bridge User's Guide

100-8007-141G

Quatech, Inc. Confidential

CHAPTER 1

INTRODUCTION

This guide describes the AirborneDirect™ Ethernet Bridge from Quatech, Inc. AirborneDirect™ is a fully integrated, 802.11 wireless Local Area Network (LAN) connectivity device designed to provide wireless LAN and Internet connectivity in industrial, scientific, medical, and transportation applications where an existing communications interface already exists. The AirborneDirect™ Ethernet Bridge is well suited to the following applications:

PointT -of-sale devices.

MedicalT equipment.

ManufacturingT machinery.

BarT -code readers.

Time clocks.

ScalesT .

DataT -collection devices.

VehicleT Diagnostics.

Telematics.

The AirborneDirect™ Ethernet Bridge provides true plug-and-play wireless connectivity. By delivering convenient, easy-to-deploy wireless network connectivity, the Bridge significantly reduces the complexities of wireless system deployment and network implementation. At the same time, users can move equipment without the cost and time associated with wired network drops and environment restrictions. This provides flexibility for seasonal demands, line and staffing changes, and more.

The AirborneDirect™ Ethernet Bridge provides a bridge between the 802.11 wireless LAN and any Ethernet-ready device with an RJ-45 connector. It acts transparently between the device and a wireless LAN. By integrating AirborneDirect™ into existing and legacy platforms, OEMs can significantly enhance their products by delivering increased value and functionality to their entire customer base.

The AirborneDirect™ Ethernet Bridge opens the world of remote device monitoring and management (as well as wide-area data collection) to any device, machine, or plant that has an Ethernet connection and a network infrastructure. The development kit provides quick and easy access to the Bridge’s configuration and functions, while providing OEMs with a platform to develop their branded solutions. The Bridge also provides the capability to perform firmware upgrades that allow new features to be added quickly and easily, protecting your investment.

100-8007-141G

AirborneDirect™ Ethernet Bridge User's Guide

Page 1

Quatech, Inc. Confidential

Introduction

FEATURES AND BENEFITST

The key features and benefits of the AirborneDirect™T Ethernet Bridge are described in TableX 1.TX T

Table 1. AirborneDirect™ Ethernet Bridge Features and Benefits

 

 

 

 

 

Feature

 

 

 

 

 

 

Benefit

SmallT

package outlineT

EasyT

to attach to existing equipment; light enough to allow easy

 

 

 

 

 

 

 

mounting to vertical surfaces.T

 

 

 

 

 

ExternalT

antenna connectionT

ImprovedT

 

control over deployment by using a standard antenna

 

 

 

 

 

 

 

connector that provides multiple antenna configurations, including

 

 

 

 

 

 

 

omni-directional wand, patch, and panel solutions.

 

 

 

 

 

 

 

AllowsT

the Bridge to be placed close to the Ethernet link and power

 

 

 

 

 

 

 

supply, while the antenna can be located remotely from the Bridge

 

 

 

 

 

 

 

for optimum placement and reception. T

 

 

 

 

IntegratedT

Ethernet cable and

SimplifiesT

use by requiring no extra cables or connectors.T

connectorT

 

 

 

 

 

 

 

 

 

 

 

 

IdealT

OEM solutionT

AT complete package for OEMs to easily and quickly integrate the

 

 

 

 

 

 

 

AirborneDirect™ Ethernet Bridge into their product range.T

 

 

 

FullyT

integrated 802.11 WLAN

NoT RF design or network software development needed

module includes radio, base-

(accelerates time-to-market while reducing development costs and

band, and application processorT

risks).T

 

 

 

 

 

 

 

 

FullT

802.11 compatibility T

EliminatesT

cables: provides Intranet or Internet connectivity using

 

 

 

 

 

 

 

industry-standard wireless infrastructure.T

 

 

 

 

BuiltT

-in TCP/IP stack, RTOS

ProvidesT

embedded products with LAN and Internet connectivity.

and application softwareT

Does not require special programming, only simple configuration.T

 

 

 

 

 

DesignedT

specifically for

IndustrialT

 

specifications ensure robust and reliable performance in

industrial, scientific, medical,

demanding system environments.T

and automotive applicationsT

 

 

 

 

 

 

 

 

 

 

 

ConnectivityT

options include

RelT

iable data transport for Ethernet devices.T

TCP/IP, ARP, ICMP, DHCP,

 

 

 

 

 

 

 

DNS, Telnet, and UDAPT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 2

AirborneDirect™ Ethernet Bridge User's Guide

100-8007-141G

Quatech, Inc. Confidential

Introduction

SAMPLE APPLICATION

FigureX 1X shows a basic application where the AirborneDirect™T Ethernet Bridge is exchanging data wirelessly between an Ethernet client and a LAN host. In this application:

The EthernetT client can be any device with an Ethernet port that is directly connected to the AirborneDirect™T Ethernet Bridge.T

The LAN host can be a network-based PC or server that requires connection to the Ethernet Client using the network. The LAN host communicates with the AirborneDirect™T Ethernet BridgeT over a wireless network connection via an attached Access Point (AP).

Figure 1. Basic Application Involving a LAN Host and Ethernet Client

100-8007-141G

AirborneDirect™ Ethernet Bridge User's Guide

Page 3

Quatech, Inc. Confidential

Introduction

USINGT THIS DOCUMENTT

In addition to this chapter, this guide contains the following chapters and appendixes:

Chapter 2, Hardware Installation describes the AirborneDirect™ Ethernet Bridge hardware and how to install it.

Chapter 3, Initial Configuration describes how to configure the AirborneDirect™ Ethernet Bridge on your network

Chapter 4, Using the Airborne Control Center (ACC) describes how to use the Windows-based application to configure, manage, and view the status of the AirborneDirect™ Ethernet Bridge.

Chapter 5, Troubleshooting provides troubleshooting suggestions in the unlikely event you encounter a problem using the AirborneDirect™ Ethernet Bridge.

Appendix A, Specifications lists the AirborneDirect™ Ethernet Bridge specifications.

Appendix B, FCC Compliance contains FCC compliance information.

Appendix C, Glossary defines the terms associated with the AirborneDirect™ Ethernet Bridge and wireless networks in general.

T

For convenience, an Index appears at the end of this guide.

Page 4

AirborneDirect™ Ethernet Bridge User's Guide

100-8007-141G

Quatech, Inc. Confidential

Introduction

CONVENTIONS

The following conventions are used in this guide:

Terminology

In the following chapters, these terms are used:

“AirborneDirect™ Ethernet Bridge” is used the first time the Bridge is mentioned in a chapter. Thereafter, the term “Bridge” is used.

“Ethernet client” refers to the device to which the AirborneDirect™ Ethernet Bridge is connected and which communicates with the Bridge over an RJ-45 connection.

“LAN host” refers to a LAN-based computer running a HyperTerminal or Telnet session, Web Browser, or LAN-based application that communicates with the Bridge via a wireless network connection.

NotesT

AT note is information that requires special attention. The following convention is used for notes.

Note: AT note contains information that deserves special attention. T

T

CautionsT

AT caution contains information that, if not followed, can cause damage to the product or injury to the user. The following convention is used for cautions.

A caution contains information that, if not followed, can cause damage to Caution: Tthe product or injury to the user. T

T

100-8007-141G

AirborneDirect™ Ethernet Bridge User's Guide

Page 5

Quatech, Inc. Confidential

Introduction

RELATED DOCUMENTATION

In addition to this guide, the following documents are provided on the CD supplied with the AirborneDirect™ Ethernet Bridge:

AirborneDirect™T Ethernet Bridge User’s Guide.

AirborneDirect™T Ethernet Bridge Quick Start Guide.

Product Briefs and ApplicationT Notes.

These documents are provided as Portable Document Format (PDF) files. To read them, you need AdobeP P AcrobatP P ReaderP P 4.0.5 or higher. For your convenience, Adobe Reader is provided on the Evaluation Kit CD. For the latest version of Adobe Acrobat Reader, go to the Adobe Web site (www.adobe.com).

AdditionalT literature about AirborneDirect™ products and the Airborne WLN Module that powers them, such as application notes, product briefs, and white papers, can be found on the Quatech Web site: wwwUTH .quatech.com.HTU

QuatechT also offers developer documentation for its AirborneDirect™ products. Please contact Quatech for more information.

Page 6

AirborneDirect™ Ethernet Bridge User's Guide

100-8007-141G

Quatech, Inc. Confidential

CHAPTER 2

HARDWARE INSTALLATION

This chapter describes the AirborneDirect™T Ethernet Bridge. Topics in this chapter include:

PackageT Contents. (below)

ItemsT Supplied by the User. (below)

HardwareT Description. (page 9X )X

SelectingT a Location. (page 13X )X

ConfiguringT The Access Point. (page 16X )X

ConnectingT the Bridge. (page 17X )X

VerifyingT Your Connections. (page 21)X

STANDARD PACKAGE CONTENTS

BeforeT beginning the hardware installation, verify that the hardware package contains:

One AirborneDirect™ Ethernet Bridge with an attached cable and an RJ-45 interface connector.

One AC power adapter and cord.

One AirborneDirect™ mounting cradle (mounting hardware is user-supplied).

If you have the AirborneDirect™ Evaluation Kit, you should also have received:

One Access Point (AP), IEEE 802.11b/g-compliant with DHCP enabled (optional).

An AirborneDirect™ Ethernet Quick Start Guide.

A CD containing this AirborneDirect™ Ethernet Bridge User’s Guide, the AirborneDirect™ Ethernet Bridge Evaluation Kit Quick Start Guide, product briefs and application notes, Adobe® Reader® for viewing the documents and an Airborne™ Control Center (ACC).

If any item is missing, damaged, or improperly functioning, contact Quatech.

100-8007-141G

AirborneDirect™ Ethernet Bridge User's Guide

Page 7

Quatech, Inc. Confidential

Hardware Installation

ITEMS SUPPLIED BY THE USER

The following items, which are not included in the package contents, are also required:

AnT Ethernet client, with an RJ-45 jack, that is within the transmit and receive range of the Access Point to be used with the Bridge.

AT LAN host running any operating system with TCP/IP (the ACC requires Microsoft®P P Windows®P P XP or Windows 2000).

AnT IEEE 802.11b/g-compliant Access PointT with DHCP enabled.T

Mounting hardware for the AirborneDirect™ bracket mounting.T

Other Access Points in the area may interfere with the Bridge’s ability to Note: associate with your chosen Access Point (the Bridge will try to associate

with the first available “best-quality” AP). If you encounter difficulties with connecting to your chosen AP, either remove power from these Access Points or move to an isolated location, and then perform the setup in Figure 1 on page 3.X

Page 8

AirborneDirect™ Ethernet Bridge User's Guide

100-8007-141G

Quatech, Inc. Confidential

Hardware Installation

STANDARD PACKAGE HARDWARE DESCRIPTION

X

FigureX 2X identifies the components on the Bridge in its standard packaging. These components include:

An external antenna.

An RJ-45 jack and cable attached to the Bridge.

A Reset switch on the bottom of the Bridge.

Three indicator Light Emitting Diodes (LEDs) on the top of the Bridge.

A mounting cradle.

Figure 2. AirborneDirect™ Ethernet Bridge Hardware (standard package)

Reset Switch

The bottom of the AirborneDirect™ Bridge provides access to a Reset Switch. The Reset switch returns all Bridge parameters to their factory default firmware settings. To reset Bridge parameters, press (and hold) this switch for at least 5 seconds after power is applied to the Bridge. To protect against accidental resets, the Reset switch is recessed.

100-8007-141G

AirborneDirect™ Ethernet Bridge User's Guide

Page 9

Quatech, Inc. Confidential

Hardware Installation

Indicator LEDs

The Bridge has three indicator LEDs for viewing its current status and its connections (see FigureX 3)X . These indicators allow for monitoring and troubleshooting of the Bridge. They also indicate the Bridge’s power-up status, link, connection, and data-activity status. TableX 2X describes the status of the indicator LEDs.

Figure 3. Indicator LEDs on the AirborneDirect™ Ethernet Bridge

Page 10

AirborneDirect™ Ethernet Bridge User's Guide

100-8007-141G

Quatech, Inc. Confidential

Hardware Installation

Table 2. AirborneDirect™ Ethernet Bridge Indicator LEDs

LED

 

LED Color

Function

 

 

Off

Bridge is not receiving power.

 

 

Red

 

Bridge failed its Power On Self Test (POST) and is not configured

 

 

 

for wireless communication.

Power

 

 

 

 

Amber

Bridge passed its POST but is not configured for wireless

 

 

communication.

 

 

 

 

 

 

Green

 

Bridge passed its POST and is configured for wireless

 

 

 

communication.

 

 

 

 

 

 

Off

Bridge is not receiving power.

Link

 

Blinking Red

Bridge is searching for an Access Point.

 

 

Green

Wireless network and MAC have associated with an Access Point.

 

 

Off

 

No power, or no wireless TCP session is established and no

 

 

 

Ethernet physical connection is detected.

 

 

 

 

 

 

Red

No wireless TCP session is established; an Ethernet physical

 

 

connection is detected.

 

 

 

 

 

 

 

 

An Ethernet physical connection was detected and there is Ethernet

 

 

Blinking Red

 

traffic present on that connection, but no wireless TCP session is

 

 

 

 

established.

Comm

 

 

 

A wireless TCP connection is established but no physical Ethernet

 

Amber

connection is detected (i.e., no Ethernet cable is attached to the

 

 

 

 

 

 

Bridge).

 

 

 

 

A wireless TCP session is established, a physical Ethernet

 

 

Blinking Green

 

connection is detected, and the Bridge is transmitting or receiving

 

 

 

 

data across the wired Ethernet port.

 

 

 

 

A wireless TCP session is established, a physical Ethernet

 

 

Green

connection is detected, but there is no active data movement across

 

 

 

 

the wired Ethernet port.

100-8007-141G

AirborneDirect™ Ethernet Bridge User's Guide

Page 11

Quatech, Inc. Confidential

Hardware Installation

Mounting Cradle

The Bridge comes with a mounting cradle that allows the Bridge to be installed on a vertical surface, such as a wall (see FigureX 4)X . Be careful not to tighten the mounting hardware (usersupplied) excessively to avoid damaging the cradle. When mounting the Bridge vertically, attach the cradle to the vertical surface, and then insert the Bridge into the cradle.

Figure 4. Mounting Cradle Dimensions

Page 12

AirborneDirect™ Ethernet Bridge User's Guide

100-8007-141G

Quatech, Inc. Confidential

Hardware Installation

HEAVY-DUTY PACKAGE

The heavy-duty version of the Bridge is supplied in a Deutsch EEC-325X4B enclosure and is available in both sealed and unsealed versions. The heavy-duty Bridge supports SAE J1455 power specifications (+4.5 to 36 VDC).

Figure 5 identifies the components on the Bridge in its heavy-duty packaging. These components include:

An external antenna.

A Deutsch 12-pin DTM13-12PA-R008 receptacle for power and signal connections.

A Reset switch.

Four indicator Light Emitting Diodes (LEDs) on the top of the Bridge.

Figure 5. AirborneDirect™ Ethernet Bridge Hardware (heavy-duty package)

Figure 6 shows the universal adapter cable supplied with AirborneDirect™ Heavy-Duty Evaluation Kits.

100-8007-141G

AirborneDirect™ Ethernet Bridge User's Guide

Page 13

Quatech, Inc. Confidential

Quatech ABDB-ET, WLNB-ET, WLNG-ET, ABDG-ET, T802.11b-g User Manual

Hardware Installation

Figure 6. AirborneDirect™ Heavy-Duty Cable (Evaluation Kit Item)

Page 14

AirborneDirect™ Ethernet Bridge User's Guide

100-8007-141G

Quatech, Inc. Confidential

Hardware Installation

Indicator LEDs

The Heavy-Duty Bridge has four indicator LEDs for viewing its current status and connections (see Figure 5). These indicators allow for monitoring and troubleshooting of the Bridge. They also indicate the Bridge’s power-up status, link, connection, and data-activity status. Table 3 describes the status of the indicator LEDs.

Table 3. AirborneDirect™ Heavy-Duty Ethernet Bridge Indicator LEDs

 

 

Name

Description

 

 

 

 

CONN

 

POST

Power on self test completed

 

 

 

LINK

 

 

 

 

CFG

Device has a valid IP address

CFG

 

 

 

 

POST

 

LINK

Device has successfully

 

 

 

 

 

associated/authenticated with an AP.

 

 

 

 

 

 

CONN

TCP/IP connection established with

 

 

 

device.

 

 

 

 

End Cap Layout

The connectors required to attach to the device are:

Ethernet/Power:

Deutsch DTM-06-12SSA

RF:

RP-SMA (Male)

Note: FACTORY RESET hole is optional, if a sealed enclosure is required.

Figure 7. End Cap Pin-out and Connector Location

100-8007-141G

AirborneDirect™ Ethernet Bridge User's Guide

Page 15

Quatech, Inc. Confidential

Hardware Installation

SELECTING A LOCATION

You can mount the Bridge on a flat surface, such as a desk or table, or on a vertical surface, such as a wall. It can also be mounted on the ceiling. If you mount the Bridge vertically, use the supplied mounting cradle previously described.

Choosing a good location for the Bridge is important because it affects the reliability of the wireless link. The most important considerations are distance from the Access Point and clearance from obstacles.

When considering a location for installing the Bridge, ensure that it:

Provides sufficient ventilation around the Bridge.

Allows easy access to disconnect the Bridge from the AC wall outlet if necessary.

Does not expose the Bridge to excessive heat, humidity, vibration, or dust.

Conforms to local regulations.

Because radio waves travel in a straight line, the location where you will install the Bridge must provide a clear path to the Access Point that is free of major obstacles. The effects of obstacles, both along and near the path, have a significant bearing on the travel of radio signals and can cause both interference and signal cancellation. Consider the effects of the following common obstacles:

Trees and large plants

A tree or large plant directly in the path can totally block the signal. With clearance above the trees, there are usually no blocking effects.

Man-made obstacles

Square or rectangular objects, in or near the path, have rectangular surfaces that can block and interfere with signals over and around them.

Floor

A floor can interfere with signals if the Bridge is mounted too low. Mount the Bridge so the antenna is high enough to allow adequate clearance from the floor.

Page 16

AirborneDirect™ Ethernet Bridge User's Guide

100-8007-141G

Quatech, Inc. Confidential

Hardware Installation

CONNECTING THE BRIDGE

The following procedure describes how to connect the Bridge:

Place the Bridge in a dry, clean location near the device to which it will be connected. The location is required to have an AC power source and be within 300 feet (100 meters) of an IEEE 802.11b/g-compliant wireless LAN Access Point with DHCP enabled. The location should be away from transformers, heavy-duty motors, fluorescent lights, microwave ovens, refrigerators or other equipment that could cause radio-signal interference.

Note:

Do not connect the Bridge to the intended Ethernet client at this time.

 

Raise the antenna on the Bridge so it is pointing vertically.

Connect the supplied power adapter to the Bridge and to a grounded 110/240V, 50-60Hz AC power source.

If your Access Point is using WEP or WPA, disable the security. You can re-enable WEP or WPA after the Bridge has been configured.

Connect the RJ-45 jack on the Bridge’s Ethernet cable to an RJ-45 jack on your Ethernetready device.

100-8007-141G

AirborneDirect™ Ethernet Bridge User's Guide

Page 17

Quatech, Inc. Confidential

Hardware Installation

This page intentionally left blank.

Page 18

AirborneDirect™ Ethernet Bridge User's Guide

100-8007-141G

Quatech, Inc. Confidential

Loading...
+ 53 hidden pages