Product Sheet
TS-100B
TS-100B
Air-Powered Series Lift-assist Aluminum Tripod Speaker Stand with Integrated Speaker Adapter
Raise and Lower the Speaker with Ease!
The TS-100 is the easiest speaker stand to use thanks to the internal air-powered shock that literally raises the speaker for you. The stand’s internal shock easily raises speakers weighing 35-50 lbs and less with no effort from the user (the Mackie SRM Series, JBL EON Series, and QSC K Series all weigh far less than 50 lbs). And, the TS-100 requires very little effort from the end user to raise speakers weighing more than 50 lbs. When you’re ready to lower the speaker, we’ve provided a convenient and ergonomic hand grip from which you can lower
the speaker - with just one hand. There’s never been an easier, more convenient, or safer way to set up and tear down speakers.
Patented Tripod Design
The TS-100’s offset tripod base design provides more support than typical “off-the-shelf” speaker stands. The design makes for very tight internal fittings, doing away with unnecessary sloppy leg problems, and includes a super strong die-cast metal collar that prevents over-tightening and breakage issues associated with all plastic designs.
Over-sized Heavy Wall Aluminum Tubing
The entire stand (legs, mast, and telescoping tube) uses oversized, heavy-walled aluminum tubing for durability, functionality, and weight savings. The TS-100 will not rust or corrode (thanks to its architectural anodized finish), is very smooth to operate, and is extraordinarily strong yet lightweight.
Field Serviceable Parts
From the foot caps on the bottom of the tripod legs all the way up to the speaker adapter at the top of the stand, the TS-100 is serviceable by parts as needed over its very long lifespan. In the unlikely event that something does break on the TS-100, simply replace with an affordable part instead of throwing the entire stand away and buying a whole new one!
Ergonomic handle for lowering the speaker.
Metal die-cast collars eliminate over-tightening and breakage issues associated
with all twist-tighten plastic designs.
Patented tripod design for increased support & stability.
Over-sized, lightweight, heavy wall aluminum tubing.
TS -100B SPECS
•TS-100B #16759— black
•Height 3’8” - 6’7” (1118 mm - 2007 mm)
•Weight 12.1 lbs. (5.5 kg)
•Base diameter 47” (1194 mm)
•Telescoping tube diameter 1.5 (38 mm)
•Adapter diameter 1.375 (35 mm)
•Load capacity of 150 lbs. (68.2 kg)
•Folded 43.5” x 5.5” (1105 mm x 140 mm)
R. 1, 09/07/09, 1S-ULT-TS-100B
|
|
|
|
|
|
|
L |
OG |
|
|
|
|
|
|
|
Y |
|
|
|
|
|
|
|
O |
|
|
|
|
|
|
|
N |
|
|
|
|
|
|
|
H |
|
|
|
|
|
|
|
C |
|
|
|
|
|
|
|
E |
|
|
|
|
|
|
|
R |
T |
|
|
|
|
|
|
E |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
W |
|
|
|
|
|
|
|
|
O |
|
|
|
|
|
|
|
|
P |
|
|
|
|
|
|
|
|
- |
|
|
|
|
|
|
|
|
R |
|
|
|
|
|
|
|
|
I |
|
|
|
|
|
|
|
|
A |
|
|
|
|
|
|
Raise and Lower Speakers with Ease!
Air-Powered Series speaker stands from Ultimate Support are the easiest speaker stands in the world to use thanks to the internal air-powered shock that literally raises
the speaker for you. The stand’s internal shock easily raises speakers weighing 50 lbs and less with no effort from the user (the Mackie SRM Series, JBL EON Series, and QSC K Series all weigh far less than 50 lbs, for instance). And, the TS-100 requires very little effort from the end user to raise speakers weighing more than 50 lbs. When you’re ready to lower the speaker, we’ve provided a convenient and ergonomic hand grip from which you can lower the speaker. There’s never been an easier, more convenient, or safer way to set up and tear down speakers.
5836 Wright Drive • Loveland, CO 80538 • Phone. 1-800-525-5628 • Fax. 970.776.1941 • Web. www.ultimatesupport.com