Q-Logic QLE 4060C, QLE4062C, QLA4050C, QLA4052C, QLA4050 User Manual

0 (0)
Q-Logic QLE 4060C, QLE4062C, QLA4050C, QLA4052C, QLA4050 User Manual

[ Quick Start Guide ]

Q U I C K S T A R T G U I D E

i S C S I H B A I N S T A L L A T I O N

d

 

 

Q L A ® 4 0 5 0 / 4 0 5 0 C / 4 0 5 2 C

Q L E 4 0 6 0 C / 4 0 6 2 C

Purchasers of OEM products should consult with the OEM for support.

Support Headquarters

QLogic Corporation

 

12984 Valley View Road

 

Eden Prairie, MN 55344-3657

QLogic Web Site

www.qlogic.com

Technical Support Web Site

support.qlogic.com

Technical Support Email

support@qlogic.com

Technical Training Email

tech.training@qlogic.com

North American Region

 

Email

support@qlogic.com

Phone

+1 952-932-4040

Fax

+1 952-932-4018

Europe, Middle East, and Africa Region

 

Email

emeasupport@qlogic.com

Phone Numbers by Language

+353 1 6924960 — English

 

+353 1 6924961 — Français

 

+353 1 6924962 — Deutsch

 

+353 1 6924963 — Español

 

+353 1 6924964 — Português

 

+353 1 6924965 — Italiano

Asia Pacific Region

 

Email

apacsupport@qlogic.com

Phone Numbers by Language

+63-2-885-6712 — English

 

+63-2-885-6713 — Mandarin

 

+63-2-885-6714 — Japanese

 

+63-2-885-6715 — Korean

Latin and South America Region

 

Email

calasupport@qlogic.com

Phone Numbers by Language

+52 55 5278 7016 — English

 

+52 55 5278 7017 — Español

 

+52 55 5278 7015 — Português

Quick Start Guide

Installation Instructions

This Quick Start Guide describes how to install and configure your new QLogic SANblade® host bus adapter (HBA) and SANsurfer iSCSI HBA Manager application in four simple steps:

Step 1. Verify the package contents.

Step 2. Install the HBA hardware.

Step 3. Install the HBA driver.

Step 4. Install the SANsurfer iSCSI HBA Manager application.

 

Keep the HBA in the antistatic bag until installation. The HBA contains parts that can be damaged by

 

electrostatic discharge (ESD). Before handling the HBA, use standard methods to discharge static

CAUTION!

electricity. Place the HBA on the bag when examining it. Retain the bag for future use.

System Requirements

Your system must have the functionality described in the following sections to support the QLogic SANblade HBA.

Minimum Software Requirements

Windows® 2000: Service Pack (SP) 4 or later (QLA405x HBAs)

Windows® Server2003 SP 1 or SP 2

Windows XP Pro SP 1 or SP 2

Windows PE 2.0, 2004, 2005

Windows Vista (Business and Enterprise)

LinuxRed Hat® Enterprise Linux 3.0 Update 7 or later (QLA405x HBAs), Linux Red Hat Enterprise Linux 4.0 Update 3 or later (QLA405x and QLE406xC HBAs)

Novell SUSE Linux: SLES 8 Update 3 or later (QLA405x HBAs), SLES 9 Update 2 or later (QLA405x and QLE406xC HBAs), SLES 10 (QLA405x and QLE406xC HBAs)

Solaris: Solaris 9 or later for Solaris SPARC and x86 (IA32 and x64)

VMware® 3.0.1 (QLA405x HBAs)

NOTE: The operating systems listed above are applicable to all HBA models unless otherwise noted.

Minimum Hardware Requirements

Empty PCI-X 32-bit or PCI-X 64-bit slot (QLA405x HBAs), 2.5-GHz PCI Express x4 slot (QLE406xC HBAs)

PCI-X: 3.3-volt signaling (QLA4050 HBAs); 3.3V or 5-volt signaling (QLA4050/4052C HBAs)

The correct media:

QLA4050: 62.5/125-μM multimode fiber

QLA4050C/4052C, QLE4060C/4062C: UTP copper (Cat5E or Cat6)

The correct connectors:

QLA4050: LC duplex

QLA4050C/4052C, QLE4060C/4062C: RJ45

1

Step 1. Verify the Package Contents

The QLogic HBA is shipped with the following items:

QLogic SANblade HBA

Low-profile bracket (not available in all models)

Quick Start Guide (this document)

SANsurfer® for SANblade iSCSI HBAs CD(s)

Step 2. Install the HBA Hardware

NOTE: When installing the QLogic HBA and driver in a Solaris system that does not already have QLogic HBAs or drivers installed, please install the QLogic Solaris driver before you install the QLogic HBA hardware. This allows Solaris to correctly bind the QLogic Solaris driver to the QLogic HBA. Failure to do so will require an additional system reboot after the driver is loaded.

To install the HBA hardware, you need to open the computer and locate the appropriate bus slot. If necessary, consult your computer system manual for instructions to remove the computer cover.

Depending on the HBA you are installing, the bus connector will look like one of the following samples:

 

 

 

PCI-X

PCI Express

 

 

 

 

 

 

 

 

QLA4050

N/A

 

Optical

 

 

 

 

 

 

 

 

 

 

 

QLA4050C

QLE4060C

 

 

 

 

 

 

Copper

 

QLA4052C

QLE4062C

 

 

 

 

 

 

 

 

 

Follow these steps to install the HBA hardware:

 

 

1.Power off the computer, then disconnect the power cable.

2.Remove the computer cover and find an empty bus slot.

2

3.Pull out the slot cover (if any) by removing the screw or releasing the lever.

4.Grasp the HBA by the top edge and seat it firmly into the slot.

5.Refasten the HBA’s retaining bracket using the existing screw or lever.

6.Close the computer cover.

7.Plug in the power cable and turn on the computer.

HBA

LEVER

SCREW

64-BIT PCI-X SLOT

(QLA405x HBAs) OR

PCI EXPRESS x4, x8, x16 SLOT (QLE406xC HBAs)

A RETAINING BRACKET

SLOT COVERS

SYSTEM

CHASSIS

Sample motherboard and slots

Step 3. Install the HBA Driver

After you have completed the hardware installation and turned on the computer, insert the applicable SANsurfer for SANblade iSCSI HBAs CD into the CD-ROM drive, based on your operating system. Follow the instructions below for your operating system.

The latest drivers and documentation can be found on the QLogic Web site, www.qlogic.com.

Windows 2000 (QLA405x HBAs only)

NOTE: If an earlier version of the Windows 2000 driver is already installed, see the readme file for information about updating the existing driver.

Perform the following steps to install the HBA driver for Windows 2000:

1.Log onto the computer as Administrator.

2.Download and save the HBA driver to your hard drive:

a.Type or browse the path to the QLogic driver directory on the applicable SANsurfer for SANblade iSCSI HBAs CD. For example:

<CD-ROM Drive Letter>:\autoplay\iSCSI_HBA_drivers\Windows

b.Locate and launch (double-click) the executable (.exe) file containing the driver.

c.When prompted, type or browse to a location on your hard drive to store the driver files. Click OK.

3.Windows detects the newly installed device, then displays the Found New Hardware with Ethernet Controller message. Click Next.

3

Loading...
+ 9 hidden pages