Pyle PLD70BT Owner's Manual

Page 1

Detachable Panel

7 Inch Wide ColorTouch ScreenTFT

Motorized Slide Down and

Car DVD/MP4/VCD/CD/MP3 Player Front panel USB port and AUX input Built in AM/FMTuner and RDS Bluetooth A2DP & AVRCP SD Card Slot in the panel

PLD70BT

OWNER'S MANUAL

Mobile Video System

Page 2

Contents

-1-

Precautions .....................................

Safety Information.........................

Disc Notes ....................................

Installation ....................................

Electric Connection ......................

Remote Control ...........................

Control Panel ................................

Basic Operations

Radio Operations ..........................

DISC Operations ...........................

DISC Special Functions ................

Detaching the control panel ..............

Changing the control panel ...............

Touch Panel

Unit Keys ......................................

TFT Monitor

........................

Audio Quality Adjustments

..................

Alternate Audio/Video Source ..........

Listening to the radio ......................

Storing stations in memory ..............

Listening to a preset station ............

RDS Function ................................

Basic Operations ............................

Select Playback Mode .....................

AUX Operation ...............................

On-Screen Disc Operations .............

Selecting audio languages ..............

....................................

Adjustment ................

Rear View Camera

...............

Setting Audio Mode .........................

Reset Factory Settings

..........................

Selecting Subtitles ..........................

Selecting multi-angle views ..............

Title menu function ..........................

General Setup ................................

Speaker Setup ...............................

Dolby Digital Setup ........................

Preferences Setup ..........................

Defaults Table ................................

USB Operations ..............................

SD/MMC Card Operations ...............

MP3/WMA/JPEG Play .....................

MPEG4 Play ...................................

Setup .............................................

BLUETOOTH .................................

Other Main Operations ...................

Specifications ...............................

Trouble Shooting ..........................

Page 3

-2-

Precautions

THANK YOU FOR PURCHASING THIS CAR DVD PLAYER .

Before operating the unit, read this manual thoroughly and keep it handy for future reference . To avoid injury or accident , read the following precautions before installing and operating the unit .

ABOUT THE LIQUID CRYSTAL DISPLAY (LCD) PANEL

Do not press on the LCD panel on the unit as doing so can distort the picture or cause a malfunction . The picture may become unclear , or the LCD panel may be damaged .

DO NOT install any receiver in locations where;

- it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident.

- it may obstruct the operation of safety devices such as air bags, as this may result in a fatal accident.

- it may obstruct visibility.

DO NOT operate any receiver while manipulating the steering wheel, as

this may result in a traffic accident.

The driver must not watch the monitor while driving. IF THE DRIVER watches the monitor while driving, it may lead to

carelessness and cause an accident.

IF YOU NEED to operate the receive while driving, be sure to look ahead

carefully or you may be involved in a traffic accident.

IF THE PARKING BRAKE is not engaged.“ ParkingBrake” flashes on the

monitor, and no playback picture will be shown.

- This warning appears only when the parking brake wire is connected to

the parking brake system built in the car ( refer to the electric connection)

ON INSTALLATION

NOTES ON CLEANING

-Clean the LCD panel with a slightly damp soft cloth.

-Do not use solvents such as benzine, thinner, commercially available

cleaners or antistatic spray .

-Do not use alcohol to clean the screen . If your car was parked in a cold or hot place, the picture may not be clear . The monitor is not damaged . The picture will become clear the temperature in your car becomes normal .

Page 4

-3-

Safety Information

REGION MANAGEMENT INFORMATION:

This DVD Player is designed and manufactured to respond to the Region

Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD Player, this DVD Player cannot play this disc.

CAUTION:

THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE . HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE DVD PLAYER CORRECTLYAS INSTRUCTED.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.

THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.

This product incorporates copyright protection technology that is protected

by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.Use of this copyright protection technology must be authorized by Macro vision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Page 5

-4-

Disc Notes

Preparing New Discs with Spots

Rough

A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc. Therefore, remove the rough edges in advance by using a ball point pen or pencil as shown on the right. To remove the rough edges, press the side of the pen or pencil against the inside and outside edges of the disc.

Rough spots on outside edge

Ball point pen or pencil

Rough spots on inside edge

Do not touch the underside of the disc

Do not bend

Wipe the disc from center toward the outside edge

Label side up

Disc Cleaning

Use a dry soft cloth to wipe the surface. If the disc is quite dirty, use a soft cloth slightly moistured with isopropyl (rubbing) alcohol. Never use solvents such as benzine, thinner or conventional record cleaners as they may mar the surface of the disc.

Handling and Cleaning

Dirt, dust, scratches and warping disc

will cause misoperation. Do not place stickers or make scratches on discs. Do not warp discs.

A disc should always be kept in its case when not in use to prevent from damaging. Do not place discs in the following places:

1.Direct sunlight

2.Dirty, dusty and damp areas

3.Near car heaters

4.On the seats or dashboard

Discs which cannot be played with this player

DVD-RAM

CDV

CDG

Note:

A disc may become somewhat scratched (although not enough to make it

unusable) depending on your handle it and conditions in the usage environment. Note these scratches are not an indication of any problem with the player.

Disc formats supported by this player

DVD

VCD

MP3

Audio and Video Discsize12cm

Audio Discsize12cm

Page 6

Installation

-5-

1. Choose the mounting location where the unit will not interfere with the normal driving function of the driver.

2. Before finally installing the unit, connect the wiring temporarily and make sure all connected up properly and the unit and the system work properly.

3. Use only the parts included with the unit to ensure proper installation. The use

unauthorized parts can cause malfunctions.

4. Consult with your nearest dealer if installation requires the drilling of holes or

modifications of the vehicle.

5. Install the unit where it does not get in the driver s way and cannot injure the

passenger if there is a sudden stop, like an emergency stop.

. If installation angle exceeds 30 from horizontal, the unit might not give its

performance.

NOTES:

it is

other

. Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration. 7 optimum

DIN FRONT/REAR-MOUNT

This unit can be properly installed either from "Front"(conventional DIN Front-mount) or "Rear"(DIN Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis). For details, refer to the following illustrated installation methods.

Revoving the unit

1. Press the button to release the front panel .REL

2. Remove the control panel .

Page 7

Installation

-6-

Installation the unit

3. Remove the PLASTIC COVER of the both sides away

4. Insert the two KEY PLAT into the grooves at both sides of the unit as shown in figure until they click .

PLASTIC COVER

KEY PLATE

5. Pulling the levers makes it possible to remove the unit from the dashboard .

DASH BOARD

METAL MOUNTING STRAP

HEX NUT

SPRING WASHER

PLAIN WASHER

TAPPING SCREW

CONSOLE

SLIDE BRACKET HOUSING

HEX BOLT

Page 8

-7-

Installation

How To Remove And Install The Front Panel

When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder.

2). Pull-off the front panel and keep the front panel into the case .

PROTECTIVE CASE

Detaching The Front Panel

Before detaching the control panel, be sure to turn off the power.

1). Press the release button and the left hand side of front panel will release.“REL”

Attaching The Front Panel

1). First insert the right hand side of the front panel into the hollow of the unit . (NOTE : the “bulge” point on the panel must be attached into the hollow of the unit .)

2). Gently push the left hand side of the front panel until you feel a “ Click” .

Hollow

Bulge

RELEASE BUTTON

PUSH

Page 9

Panel Angle Adjustment

-8-

Caution:

Do not insert your finger behind the control panel.

When you want to change the viewing angle of the operating unit to play, you can touch the section on touch screen (or press the button on the front panel) repeatedly to select the desired angle as follows:

ANGLE1-ANGLE2-ANGLE3-ANGEL4-ANGLE 1 .

CHANGING THE CONTROL PANEL ANGLE

ANGLE 1 ANGLE 2

ANGLE 3ANGLE 4

Page 10

Electric Connection

WIRING CONNECTION

-9-

Note: the earth connection cable (parking brake B-) must be connected in order for DVD pictures to be played back to the monitor. If the cable has not been correctly connected, the message “PARKING BRAKE” appears on the monitor.

FRONT RCA WHITE L

FRONT RCA RED R

VIDEO OUT 1 YELLOW

FRONT RCA OUTPUT

CABLE

(FOR RCA LINE OUT VERSION ONLY)

GREY

GREY/BLACK

FRONT

Rch SPK.

VIOLET

VIOLET/BLACK

WHITE

WHITE/BLACK

GREEN

GREEN/BLACK

REAR

Lch SPK.

AUTO

ANTENNA

BLUE

FUSE

GROUND(B-)

MEMORY

BACK-UP(B+)

IGNITION

SWITCH(B+)

RADIO ANTENNA JACK

RED

YELLOW

BLACK

MAIN UNIT

REAR

Rch SPK.

FRONT

Lch SPK.

CHOKE BOX

GREY SUBWOOFER VIDEO OUT 2 YELLOW

COAXIAL OUT BROWN

WHITE

(B+)12V REAR CAMERA SWITCH

BROWN

YELLOW

RCA CABLE

REAR CAMERA INPUT

(B-)PARKING BRAKE

RCH RED

LCH WHITE

REAR RCA OUTPUT

CABLE

FUSE

ISO CONNECTOR

Page 11

Remote Control

-10-

Button

Ref #

Function

Redial/

CLK

Press it briefly to view the clock time , Press again to return to normal display mode . Press longer to set the time .

PAIR/

Press it to use the Bluetooth function , refer to the page 33 .

STOP

Press once to pause playback. Press PLAY/PAUSE to resume playback. Please note: if you press STOP twice, playback will start at the beginning of the disc.

SETUP

Press this button to open the SETUP menu.

MO/ST (AUDIO)

In Radio mode, press this button to change between Mono and Stereo reception modes (when a station is weak, sometimes switching to Mono will improve sound quality). In Disc Playback mode, pressing this button opens the AUDIO setup menu for making changes to the way the soundtrack is reproduced.

SUBTITLE LOCAL/ DISTANT

In DVD Disc Playback mode, pressing this button will allow you to change the subtitle language on discs which have this as an option. In Radio mode, press this button to change the radio reception sensitivity in stations are near or far.

Press this button to use the Bluetooth function, refer to page 33.

Page 12

Remote Control

-11-

Button

Ref #

Function

GOTO

Press it button to begin playback at a moment in the program you designate. Use number buttons to enter the data that is needed. In Bluetooth menu, it serves as the asterisk button on your mobile handset.

Press these buttons to skip ahead or back one track. (Note: In DVD mode, press continually the twice to skip back one)

SEL

Press this button repeatedly to cycle through the various audio and video adjustments you can make: Volume, Bass, Treble, Balance, Fader, Color, Brightness, Contrast and Tint.

VOL+/-

Use these controls to adjust the volume level.

Press to navigate the various menus present in the product.

///

Press this button briefly to display the root level directory of a DVD disc. Press and hold this button to turn on or off the SUBWOOFER output.

Menu SubWoofer

()

BAND (OSD)

In Radio mode, press this button repeatedly to switch between the five radio bands: FM1 > FM2 > FM3 > AM1 > AM2. In Disc Playback modes, Press this button to see information about the disc currently in play.

/MOD

Press this button to turn the unit ON , press and hold to turn the unit OFF. Press it briefly to select the Disc, Radio , AUX In , BT Music mode.

PLAY/ PAUSE

In Disc Playback mode, press to pause playback. Press again to start where playback stopped.

MUTE

Press this button to turn off the audio. Press again to restore the sound to its prior volume level.

TITLE/ PBC(A/P)

When playing a DVD, pressing this button will open the TITLE menu which is recorded on the DVD. When playing a VCD disc, press this button to create a PBC (Playback Control) menu for the disc to assist in making playback selections. In Radio mode, press and hold this button to start the Auto-Program mode, during which the tuner will scan for all strong stations and assign them to the radio preset buttons.

Press this button to adjust the screen viewing angle (see page 8).

ANGLE

For DVD discs which have alternate viewing angles encoded, when you see the "angle mark" symbol advising you that these angles are available, press this button to see them.

EQ/LOUD

Press repeatedly to cycle through the different equalizer curve presets you may wish to use for enhanced listening.

In Disc Playback mode, press for fast forward/reverse playback.

Page 13

Remote Control

-12-

Using the Remote Control

Face the remote control towards the player front face IR mark (remote control signal

receiver).

Operation angle: About 30 degree in each the direction of the front of the IR mark.

Preparing the Remote Control

1.First push to inside as the direction indicated by the arrow (See )And then

Remove the battery holder as the direction indicated by the arrow (See ).

2.Replace the battery Set a new battery property with (+)side up as illustrated

(See ).

3.Insert the battery holder. Push in the holder to the original position(See ).

Inserting the Battery

Note :

The lithium cell in the battery compartment of remote control has been secured for

transport with a foil . Before initial use please remove this foil so that the remote

control is ready for operation .

Button

Ref #

Function

0-9

+10/

1-6

Six numbered preset buttons store and recall stations for each band

This button is used with the other number buttons for use with two-digit number entries. In Bluetooth menu, it serves as the hash button on your mobile handset.

ENTER

This button is used to confirm selections and settings within many of the menus in the OSD system.

Use to input numerical values during programming, with the GOTO button, or to directly select a track to play . In addition, in Radio Mode (when RDS is engaged), 0 serves as the TA button and 9 serves as the AF button.

Page 14

Control Panel

Touch Panel

Key Functions

-13-

Touch Screen Key :

MODE

Operating mode selection

MUTE ON

To switch of the sound

Loading and ejecting the DVD/CD

VOLUME-

Decrease the volume level

Changing the viewing angle of the operating unit

SEL

Select the menu of the Picture/Sound

VOLUME+

Increase the volume level

Registering devices with one another

PAIR

Calling up the Bluetooth menu

DIAL

Redialling

REDIAL

Next menu

VOLUME+VOLUME-

MODE MUTE ON

PAIR

DIAL

REDIAL

SEL

Page 15

-14-

Unit Keys :

Control Panel

1 AUX Input JACK

For information about connecting a AUX device, please see page 25 .

2 IR SENSOR

3 VOL+/VOL- KNOB

In normal mode, this knob is used to increase or decrease the volume. It is also used as an UP/DOWN knob when audio or video settings are being adjusted when accessed using the SELECT button.

4 (POWER On/Off )/MODE BUTTON

Press this button to switch the device on. WELCOME appears in the display. Press it again to switch the device off. SEE YOU appears in the display. In playback mode, you can use the button to select the input mode by pressing repeatedly until the proper one is found :

DISC > AUX IN >RADIO > BLUETOOTHMP3 .

5 ANGLE (Screen position)

Press this button repeatedly to cycle through the different positions.

9 8

5 4

Page 16

Control Panel

-15-

9 (EJECT) BUTTON

Press it button to eject the DISC or insert the DISC to start play .

11 SD/MMC CARD SLOT

8 SELECT BUTTON

To access the available adjustment settings for audio and video, press this button repeatedly to cycle through and select them:

Tint Contrast Bright Color Bluetooth

Buzzer Volume Bass Treble Balance Fader

6 REL BUTTON

Press this button to release the front panel for removal . Refer to see page 7.

10 USB OPERATION

For information about connecting a USB device, please see page 35.

12 MIC

Microphone .

13 RESET BUTTON

Press this button to return to factory settings .

7 /CH 1-6 BUTTON(RADIO PRESET)

-Store in Memory >

-Retrieve a preset station

Press this button to pause playback, press it again to resume playback.

Press this button repeatedly to preset station. With this system a total of 30

stations can be stored in the memory . Each band store up to six preset stations. The stations might be FM1, FM2, FM3, AM1 (MW1) and AM2 (MW2) band.

Select the frequency band

> Press repeatedly the button to select the desired memory key .

> Select the station > Keep the desired memory key pressed in until the station is heard again

after a brief interruption .

The operation as below:

press the button repeatedly to retrieve a station which had been stored in the memory in advance the chose number is shown on display .

In Disc Playback Mode

In Radio Mode

Page 17

-16-

Basic Operation

Press it to switch the device ON, press and hold about 2 seconds to switch the device OFF.

POWER On/Off

Ejecting The Disc

Use your finger to touch the

range on touch screen , the control panel of the unit will swing downwards . Then

you can insert the disc or eject the disc .

Mute Function

Touch “MUTE ON” range, it will mute the sound but the disc continues playing . Touch it again to resume .

MUTE ON

Setting The Buzzer ON/OFF

Repeatedly touch range to select the item, and

theusetheVOL+/-toswitchthe

“SEL”

BUZZER

BUZZER ON/OFF

SEL

Setting the Background Color

SEL

In radio mode, repeatedly touch the range to select the

item, and then use

the VOL+/- to select the back-

“ SEL ”

“wallpaper”

ground color among of the

in the mode, the monitor of unit will change the background color automatically .

“wallpaper

AUTO, wallpaper: 01 ...... wallpaper:11”,

“AUTO”

Touch screen

Touch the screen the VOLUME- to decrease the volume level .

Touch the screen the VOLUME+ to increase the volume level .

VOLUME-

VOLUME+

Volume Adjusting

Volume button

Revolve : clockwise to increase /

Anticlockwise to decrease .

Setting The Clock

Touch briefly the range

to show/hide the clock .

Touch hold for more than 2’s

use

“CLK”

the hour will flash , the VOL+/- to adjust .Touch it again, the minute will flash, then use the VOL+/to adjust .

CLK

Setting Blue-tooth ON/OFF

SEL

Repeatedly touch range

to select the item, and

theusetheVOL+/-toswitchthe

“SEL”

Bluetooth

Bluetooth ON/OFF

Select Sources

Touch the MOD section on the screen, the signals will display in the screen as follow :

repeatedly

MODE

DISC

AUX IN

RADIO BLUETOOTH MP3

Page 18

MODE

SEL

VOLUME+VOLUME-

MUTE ON

TREBLE +02

FLAT

DISC-IN

12: 18

touch to adjust

touch to select

-17-

TFT Monitor Adjustment

During DISC playback, use your finger to touch briefly the SEL section on the screen (or press SEL button on front panel

mode

)

to access the Picture

selection menu, by repeatedly touch the SEL section, and then touch the VOL+/(or rotate the VOL+/-) to adjust the selected mode . (The corresponding value will show on the monitor )

COLOR: 0 to 32

Adjust the color for the picture-lighter or

darker. BRIGHT:0to32

Adjust if the picture is too bright or

too dark. CONTRAST: 0 to 32

Adjust the contrast of the bright and dark

portion. TINT:0to32 Adjust the tint if the human skin color is

unnatural.

-Adjustable when NTSC is selected for NTSC/PAL .

ADJUSTABLE ITEMS:

““

Basic Operation

ADJUSTABLE ITEMS: Volume:

Bass:

Treble:

0to32

Adjust volume level by using VOL +/-.

-14to+14

Adjust bass level by using VOL +/-.

-14to+14

Adjust treble level by using VOL +/-.

Volume Bass Treble Balance

Contrast Bright ColorTint

FadeBuzzer

Bluetooth

SEL

MODE

SEL

VOLUME+VOLUME-

MUTE ON

BRIGHT 16

touch to adjust

touch to select

Audio Quality Adjustment

Volume Bass Treble Balance

Contrast Bright ColorTint

FadeBuzzer

Bluetooth

During DISC playback, use your finger to touch briefly the SEL section on the screen (or press SEL button on the front panel )

to access the Sound mode selection menu, by repeatedly touch the SEL section, and then touch the vol+/(or rotate the vol+/-) to adjust the selected mode . (The corresponding value will show on the monitor )

SEL

Rear View Camera

When connecting the rear view camera. the mirror image of the rear view through the rear view camera is automatically displayed on the monitor when you change the gear to the back position. (The monitor on the unit only.)

Page 19

-18-

Basic Operation

Balance:

Fader:

R0-10toL0-10. Adjust sound balance between left and right speakers by using VOL + / -

F0 10toR0-10. Adjust sound balance between front and rear speakers by using VOL + / VOL - .

The button is to be activated for the following reasons: A. Initial installation of the unit when all wiring is completed. B. All the function buttons do not operate. C. Error symbol on the display.

RESET

Reset Factory Settings

RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object.

Touch the screen the DSP range (orpresstheEQbuttononthe remote control ) to select one of the preset sound modes .

The information will display in the monitor as follow :

(Rock/Pop/Jazz/Classic/Flat).

Setting Audio Modes

It`s depend on your habit to select the

Audio mode .

DSP

GOTO

S-WOOFER

DSP

OSD

FLAT

DISC-IN

16: 18

ROCK

TA AF CLK LUD

RANDOM REPEAT INTRO

POP

FLAT

ROCK

CLASSIC

JAZZ

touch to select

ALTERNATE AUDIO/VIDEO SOURCE

On the front panel of the unit , there is an AUX IN jack, to connect analogue replay devices. Use this jack to replay sound of other replay equipment such as DVD players, computers, etc. Via the loudspeakers.

1). Please f connect the external device with stereo jack plug the AUX IN socket .

2). Press the MOD button to select the AUX IN connection.

3). Use the buttons on the external device itself to operate it .

ollowing the diagram below,

Headphones port

AUX IN

Page 20

Radio Operation

-19-

Touch “ ” to next .

Touch “ ” to previous .

When an FM stereo broadcast is hard to receive

Touch the section on

touch screen (or press button on the remote control ) to select the MONO or STEREO mode . (When Stereo mode is activated, the ST symbol will appear . )

“STEREO/MONO”

ST/MO

Listening to the Radio

SwitchingTo Radio Mode

Touch the screen of range (or press the MOD button on the front panel ) repeatedly to

“MODE”

MODE

select the RADIO mode. the following information will appears as below:

Touch the range on the touch screen (or press LO/DX button on the remote control ) to select the LOCAL or DX mode . ( You can choose between the LOCAL and DX(DISTANCE) mode for local or long-distance traffic news . )

“LOC ”

To tune in strong-singnal FM

Station only (LO/DX function)

S-WOOFER

FM1 87.60

MHZ

APS

STEREO/MONO

FLAT

NO-DISC

12:06

BND

REDIAL

DIAL

PAIR

DSP

MODE

SEL VOLUME+VOLUME-

MUTE ON

FM1 87.60

MHZ

123456

FLAT

NO-DISC

12:06

FM1 87.60

MHZ

FLAT

NO-DISC

12:06

PTY

CLOCK LOUDNESS

LOC

FM1 FM2 FM3

AM2(MW2)

AM1(MW1)

select the band , the message will show in turn :

Selecting The Frequency Band

Touch the screen of

section repeatedly to

“ BND ”

BND

Start Searching For a Station

During Radio mode, briefly touch the screen of “ ” section to increase frequency by one step of channel spacing .

Briefly touch the “ ” section to decrease frequency by one step of channel spacing .

Manual Search

Automatic Search

During Radio mode, touch and hold (for more than 2’s ) the screen of “ / ” section to start search for a radio station automatically .

Page 21

Radio Operation

-20-

MODE

SEL VOLUME+VOLUME-

MUTE ON

FM1 87.60

MHZ

123456

FLAT

NO-DISC

12:06

Touch to preset station

Scan Function

In Radio mode, briefly touch the

section on the touch screen ,

the radio briefly plays all the

APS

preset stations of the frequency band .

APS

e.g. FM1, for the stronger signal level until the search cycle has finished . The six strongest stations are then allocated to the corresponding storage locations . Then the station of the first storage location is set .

RDS FUNCTION

In Radio mode, touch it to select the desired item, it will display the

following as below :

TA Traffic Annonuncement

(priority ForTraffic Information)

In Radio mode, touch briefly the screen of range to activate the TA function.

“TA”

Touch it again to turn off the TA function . When the TA function is activated, the TA symbol appears in the display . During radio operation in one FM frequency band the search for a traffic announcement station is started automatically (TA SEEK) . If an FM station is being received which transmits the latest traffic announcements from time to time, the TP display lights up.

FM1 87.60

MHZ

FLAT

NO-DISC

12:06

PTY

CLOCK LOUDNESS

LOC

Touchto select

Storing Stations In Memory

Touch the screen of the sections“ 1-6 ”

With this system, a total of 30 stations can be stored in the memory of six buttons. Each band stores up to six preset stations. The stations might be FM1, FM2, FM3, AM1(MW1), and AM2(MW2) band. The operation is as below :

-Retrieve a preset station

1-6 sectionsTouch the briefly to retrieve

a station which had been stored in the memory in advance the chose number is shown on display .

-Store in Memory > Select the frequency band

> Select the station > Keep the desired memory key pressed in until the station is heard again after a brief interruption .

Automatic Memory Storing & Program Scanning

Automatic Preset Setup

In Radio Mode, Touch and keep the

APS section on the touch screen

for about 2 seconds to active

APS

automatic station storage. The radio searches within the current frequency band,

Page 22

AF FUNCTION

(Alternative Frequencies)

AF is a function that works with the help of RDS (Radio Data System) and can only be used with FM stations . The radio searches in the background for the best frequency reception of the station that has been tuned into .

Touch the AF section on touch screen or swing and keep the SEL knob in the TA/AF direction for about 2 seconds , the AF function is activated. The AF symbol appears in the display .

When the AF function has been switched on, the radio continuously tests the signal strength of the AF frequency . The test interval for each AF frequency depends on the signal strength of the current station and varies from a few minutes in the case of weak signals. Whenever the new AF frequency is stronger than the station that is currently tuned in , the radio switched to this frequency for a short time for a short time and the message “NEW FREQUENCY “ is displayed for one or two seconds.

In Radio mode, touch briefly the screen of range to activate the AF function. Touch it again

to turn off the AF function .

“AF”

Radio Operation

-21-

When the TA function is switched on , the FM traffic automatically interrupt CD operation(the word TRAFFIC appears in the display).

The volume level is increased to the

minimum value for the transmission of traffic announcements.

After the traffic announcements has

finished, the program that was previously running is resumed.

Interruption of the TA Function: if you would like to interrupt the current traffic announcement, touch the TA section on screen briefly . This does switch off the TA mode .

the status of the AF function is shown by an AF symbol in the display.

If the AF symbol appears in the display, the AF function is switched on and RDS transmission date is being received . If the AF symbol flashes in the display, the AF function is selected but no RDS signal can be received at the moment .

Note :

PTY FUNCTION

In Radio mode, touch the screen of “PTY” range to select the Program type .

besides the stations name, some FM stations also transmit information on the type of program. This information can be displayed by your car radio .

PTY Selection of the program type

Examples of such types of program are :

SPORT NEWS POP WEATHER......

With PTY function you can specifically select stations transmitting a particular type of program. Touch the PTY range on screen repeatedly to call up the PTY selection menu . The message “PTY SEEK” then appears briefly in the display .

When PTY has been selected the radio starts searching for corresponding PTY information and stops when the PTY information has been found, “NO PTY” appears in the display. If the PTY information being searched for no longer exists, the PTY function automatically switches to normal mode .

PTY

Page 23

DVD 1-0:00:16

FLAT

DISC-IN

12: 16

GOTO

S-WOOFER

DSP

OSD

TA AF CLK LUD

RANDOM REPEAT INTRO

MODE

SEL

VOLUME+VOLUME-

MUTE ON

DVD 1-0:00:16

FLAT

DISC-IN

12: 16

TITLE

DVD 1-0:00:16

AUDIO ZOOMSUBTITLE

FLAT

DISC-IN

12: 16

SETUP

PAIR

DIAL

REDIAL

DISC Operation

-22-

Basic Operation

During DISC playback, you can touch the screen to display the following:

MODE

SEL

VOLUME+VOLUME-

MUTE ON

DVD 1-0:00:16

FLAT

DISC-IN

12: 16

Switching the DVD mode

Touch the screen of range (or press MOD button on the front panel ) to select the DISC mode, it display like following :

“MODE”

Function setup (different the source the display is different)

Touch “ ” to next .

Touch “ ” to previous .

Stopping Play

Touch the screen the range (or press the button on remote control .) To stop the unit playback. Touch the section or press button on front panel to start play.

Pause (still picture)

Touch the “ ” section on touch screen during playback will stop play temporary, touch it again to return the normal playback .

DVD 1-0:00:16

FLAT

DISC-IN

12: 16

DVD/VCD/CD/MP3:

Normal Playback 2x 4x 8x 16x

Rapid Forward/Rapid Reverse

During DISC playback, touch the screen of “ / ” range the speed of rapid forward/reverse changes according to the disc as follow:

Page 24

DVD 1-0:00:16

FLAT

DISC-IN

12: 16

GOTO

S-WOOFER

DSP

OSD

TA AF CLK LUD

RANDOM REPEAT INTRO

DISC Operation

-23-

Subwoofer Function

Use your finger touch the “ section on the screen to turn on the Subwoofer

function, touch it again to cancel function .

S-WOOFER“

S-WOOFER

Selecting The Play Modes

During the Disc playback, touch the touch screen, it will display the following as below :

Touch to select

1). Repeat Function

FOR DVD :

Touch the screen the of (or press longer button on the

remote control) to select REPEAT mode as follow :

“REPEAT”

2/RPT

range

REPEAT ALL

CHAPTER REPEAT ON TITLE REPEAT ON

1. Continuously repeat at the current chapter/track, when selected REP-ONE mode .

2. Select REP-ALL mode to continuously repeat all chapter/track on the current disc .

REPEAT OFF

REPEAT ONE REPEAT ALL

FOR VCD/CD/MP3 :

Touch the screen the of (or press longer button on the

remote control) to select REPEAT mode as follow :

“REPEAT”

2/RPT

range

2). RDM(RANDOM) Function

During DISC playback, touch screen of

section ( press the button longer on the remote control to play in random.

“RANDOM” 4/RDM

Loud Function

Touch the screen of range to switch the Loudness function ON or OFF.

“LUD”

LUD

Skipping Track

During DISC playback, Touch the

/ section on the touch screen

to skip to next/back one track.

Note :

1. In DVD mode, touch the section continually twice to back one track .

2. For some VCD2.0 disc (PBC-playback control), above these buttons may be unavailable .

Zoom Function

Repeatedly touch the section of the ZOOM, the displaying rate can be 2x, 3x, 4x, 1/2, 1/3, 1/4 .

Use the direction keys ( / / / on remotecontrolor///ontouch screen) to move the enlarged picture . Note: During the JPEG disc playback , touch the screen of “ZOOM” range , the “zoom 100%” word will display, then you can touch shortly the / section on touch screen (or press the / buttons on remote control ) to zoom in/zoom out the picture. In zoomed mode, use the direction keys to move the enlarged picture .

ZOOM

Page 25

DVD 1-0:00:16

FLAT

DISC-IN

12: 16

GOTO

S-WOOFER

DSP

OSD

TA AF CLK LUD

RANDOM REPEAT INTRO

-24-

DISC Operation

NOTE : For MP3, the 3/INT button is not

available.

FOR CD :

Touch the screen of the section (or longer press the button on the

remote control ) to play the previous 6 seconds part of each track/chapter on disc. (Touch it again to cancel this mode)

“INTRO”

3/INT

3). INT Function

FOR VCD :

Touch the screen of the section (or long press the button on the

the remote control ). It display will following menu as below : (touch it again to cancel this mode .)

“INTRO”

3/INTer

SELECT DIGEST TYPE: TRACK DIGEST DISC INTERVAL TRACK INTERVAL

Use the UP, DOWN, LEFT and RIGHT arrows on the remote to select the item, and then press ENTER to confirm .

FOR DVD :

Touch the screen of the section (or long press the button on the

the remote control ). It display will following menu as below : (touch it again to cancel this mode .)

“INTRO”

3/INTer

Use the UP, DOWN, LEFT and RIGHT arrows on the remote to select the item, and then press ENTER to confirm .

SELECT DIGESTTYPE: TITLE DIGEST CHAPTER DIGEST TITLE INTERVAL CHAPTER INTERVAL

Each playing, the order is different . (Depend on the disc used for VCD). Touch it again to cancel this function . Note : in random mode, the button is not available .

DISC Search (GOTO)

Touch to select

FOR DVD :

Touch the screen the of range (or press on the remote

control ) Twice, the screen will display the following message :

“GOTO”

GOTOthe button

Title 01/01 Time -:--:--

0:10:36

You can select the item you want to watch through TIME setting by using numberic buttons . (E.x. 0:10:36)

FOR VCD (With PBC OFF):

Touch the screen the of range (or press GOTO on the remote control )Once, the screen will display the

following message :

“GOTO”

the button

Disc Go To --:--

00:36

Use the numberic buttons to input the time directly (E.x. : 00:36)

GOTO ENTER

012345

FLAT

DISC-IN

12:16

DVD 1-0:00:16

6 7 8 9 +10

Page 26

-25-

DISC Operation

AUX Operation

o connect analogue replay devices. Use this jack to replay sound of other replay equipment such as DVD players, computers, etc. Via the loudspeakers.

On the front panel of this unit, there is an AUX IN jack, follow the diagram below t

3). You now hear the sound from the external device played back through the loudspeakers .

4). Touch the volume+/- sections on touch screen or use the VOL+/- on the remote to adjust the volume level.

Touch and hold the / section on the touch screen , you can select the title or chapter of DVD . (Only for the DVD with title /chapter.)

Note:

1). Please connect the external device with stereo jack plug the Aux in socket .

2). Touch the MOD section on screen or press the MOD button to select the AUX IN connection. It will display the following as below :

LUD

CLK

S-WOOFER

AUX IN

FLAT

DISC-IN

12: 16

DSP

VOLUME+

AUX IN

VOLUME-

FLAT

DISC-IN

12: 16

MODE

MUTE ON

SEL

REDIAL

DIAL

PAIR

AUX IN JACK FRONT PANEL

MOD

VIDEO IN (yellow)

RCHIN(red)

LCH IN (white)

AUX IN

Page 27

-26-

NOTE:

For CD and MP3,the message will always display on the screen.

SINGLE ELAPSED SINGLE REMAIN

3.Example for MP3: Each time is pressed or touch , the message displayed on screen changes as follows:

OSD

E.Touch or Press for the fifth time: The message on the screen will be cleared for SVCD and VCD.

OSD

SINGLE ELAPSED

TRACK 01/16 0:00:56

SINGLE REMAIN

TRACK 01/16 0:05:10

TOTAL ELAPSED

TRACK 01/16 0:31:36

TOTAL REMAIN

TRACK 01/16 0:36:26

2.Example for VCD/SVCD/CD: A.Touch or Press for first time:OSD

B.Touch or Press for second time:OSD

C.Touch or Press for hird time:OSD

D.Touch or Press for fourth time:OSD

DISC Operation

E. Touch or Press for fifth time: The message on the screen will be cleared.

OSD

TITLE ELAPSED

T 01/01 C 01/38 0:02:06

TITLE REMAIN

T 01/01 C 01/38 3:24:36

CHAPTER ELAPSED

T 01/01 C 01/38 0:02:56

CHAPTER REMAIN

T 01/01 C 01/38 0:04:32

ON-SCREEN DISPLAY FUNCTION

During playback, touch the screen the OSD section (or press the OSD on the remote), it will display the following as below :

1. DVD: A.Touch or Press for first time:OSD

Title Number, Total Title Number, Chapter Number, Total Chapter Number of this Title of the disc currently being played will be shown on the screen, along with the elapsed time.

B.Touch or Press for second time:OSD

C.Touch or Press for hird time:OSD

D.Touch or Press for fourth time:OSD

OSD

Page 28

TITLE

DVD 1-0:00:16

AUDIO ZOOMSUBTITLE

FLAT

DISC-IN

12: 16

SETUP

PAIR

DIAL

REDIAL

MONO LEFT MONO RIGHT

STEREO

MIX-MONO

For VCD/CD:

AUDIO

during playback, touch the section of the touch screen or Press

on the remote . It is possible to switch the sound between monaural and stereo sound.

-27-

DISC Special Functions

DVD/VCD Special Function

During DVD playback. Touch the section on touch screen(or press the SUBTITLE on the remote) .

SUBTITLE

1. Multi-subtitle Language Function (for DVD Only)

Notes:

- The language number is different according to the disc.

- Some discs only contain one subtitle language.

- When no different subtitle language are recorded, will be displayed at screen left top corner.

Each time the button is pressed or touch, number of the subtitle language changes in sequential order.

SUBTITLE

2. Multi-Audio Language Function

For DVD:

During DVD playback , touch the section on touch screen (or press the AUDIO

AUDIO

on the remote .) Each time the button is pressed or touch , number of the audio soundtrack language changes on sequential order.

Notes:

- The language number is different according to the disc.

- Some disc only contain one language soundtrack

- When no different language soundtrack are recorded will be display at screen left top corner.

AUDIO

Touch to select

For DVD:

If the DVD has multiple titles recorded on the disc. It can select preferred title from the

4. Title Menu Function

title menu to start playback.

- During DVD playback, touch the section or press TITLE button on the remote .The title menu is display.

- Touch the cursor button shown in TV screen, select preferred title by the cursor button and confirmed by touch ENT button .

Press button on the remote control while the disc is playing, you can switch between "PBC on"and "PBC off" mode.

TITLE

TITLE/PBC

For VCD:

TITLE

During DVD playback, press the ANGLE ( ) button on the remote control . Each time the button is pressed , the number of the angle changes in sequential order.

3. Multi-Angle Function

(for DVD Only)

Notes:

- The angle number is different according to the disc.

- The function only work for disc having scenes recorded at different angles.

- When no different angle are recorded,

will be displayed at screen left top

corner.

Page 29

SETUP

-28-

1.TV DISPLAY SETUP

This is to select the appropriate TV

aspect (4:3 or 16:9) according to the connected TV set.

Played back in the PAN & SCAN style. (If connected to wide-screen TV, the left and right edges are cut off.)

Played back in letterbox style. (If connected to wide-screen TV, black bands appear at top and bottom of the screen.)

Select when a wide-screen TV set is connected.

Normal/PS (For 4:3 TV)

Normal/LB (For 4:3 TV)

Wide (For 16:9 TV)

GENERAL SETUP

--- GENERAL PAGE ---

1. Press button on the remote control .

2.The SETUP menu is displayed.

3.Select the preferred item by using the

/ / / buttons

4.Press ENTER button.

a.GENERAL SETUP

This setup page includes the item of TV display & audio output feature. The detail please refer to

b.SPEAKER SETUP

This is to activate the audio output from DOLBY AC3 5.1 DOWNMIX to 2 channel mode. Please refer to

c.DOLBY DIGITAL SETUP

Please refer to

d.PREFERENCE SETUP

This setup page includes all the configuration of support feature. The detail please refer to

SETUP

GENERAL SETUP MENU.

SPEAKER SETUP MENU.

DOLBY DIGITAL

SETUP.

PREFERENCES SETUP MENU.

Go To General Setup Page

-----General setup page----

Angle Mark

Last Memory

TV Display

Screen Saver

Spdif Output

OSD Lang

Captions

ENG

SPDIF/RAW

DOLBY

Video Material

Normal

Pan Scan

TV Screen

Letter-box

Wide(16:9)

4:3

Set TV Display Mode

-----General setup page----

Angle Mark

Last Memory

TV Display

Spdif Output

OSD Lang

Captions

Normal/PS

Normal/LB

Wide

Screen Saver

DOLBY

Page 30

3.OSD LANG TYPE SETUP

Select the preferred OSD language by using the / buttons.

-29-

5.CAPTIONS SETUP

Activate the CAPTIONS feature by

selecting ON. And release this feature by selecting OFF.

2.ANGLE MARK DISPLAY SETUP

If it is set to ON, when the multi-angle DVD disc is playing, (the angle mark) will appears on the screen; if is set to OFF, the mark will not appear.

4.SPDIF OUTPUT

This is to activate the audio output

from SPDIF OFF mode to SPDIF/RAW mode to SPDIF/PCM mode.

Set Angle Mark

-----General setup page----

Angle Mark

Last Memory

TV Display

Spdif Output

OSD Lang

Captions

OFF

-----General setup page----

Angle Mark

Last Memory

TV Display

Spdif Output

OSD Lang

Captions

Set OSD Language

Closed Caption

-----General setup page----

Angle Mark

Last Memory

TV Display

Spdif Output

Captions

OFF

Screen Saver

Screen Saver Screen Saver

OSD Lang

DOLBY

Setup SPDIF

-----General setup page----

Angle Mark

Last Memory

TV Display

Spdif Output

Osd Lang

Captions

SPDIF OFF

SPDIF/RAW

SPDIF/PCM

Screen Saver

DOLBY

SETUP

Spanish

German

French

English

Portuguese

Italian

Russian

Page 31

-30-

6.SCR SAVER SETUP

Select the SCR SAVER output ON/OFF.

7.LAST MEMORY SETUP

Select the LAST MEMORY output ON/OFF.

SPEAKER SETUP

--- SPEAKER SETUP PAGE ---

This is to activate the audio output from DOLBY AC3 5.1 DOWNMIX to 2 channel mode. Select the preferred SPEAKER connection by using the cursor buttons. Select the LT/RT to activate the Dolby surround compatible output. Select the STEREO to activate simple stereo mode.

DOLBY DIGITAL SETUP

DYNAMIC RANGE CONTROL

Select DRC and adjust the dynamic range of a Doby Digital encoded program. There are 8 steps between full compression and off compression.

Screen Saver

-----General setup page----

Angle Mark

Last Memory

TV Display

Spdif Output

OSDLang

Captions

OFF

Set Last Memory State

-----General setup page----

Angle Mark

Last Memory

TV Display

Spdif Output

OSD Lang

Captions

OFF

DOWNMIX

LT/RT

STEREO

Set Downmix Mode

-----Speaker Setup Page----

Screen Saver

DOLBY

Set DRC OFF

FULL

6/8

4/8

OFF

2/8

-----Dolby Digital Setup----

DYNAMIC

DOLBY

SETUP

Page 32

--- PREFERENCES PAGE ---

-31-

PREFERENCES SETUP

1.TV TYPE SETUP

This player can play discs recorded in either PAL or NTSC format.Select NTSC format, when you connected to NTSC TV.Select PAL format, when you connected to PALTV.Select AUTO format, the player TV output format will according to the DVD disc format..

2.AUDIO LANGUAGE SETUP

Select the preferred AUDIO soundtrack by using the cursor buttons.

3.SUBTITLE LANGUAGE SETUP

Select the preferred SUBTITLE language by using the cursor buttons.

4.DISC MENU LANGUAGE SETUP

Select the preferred DISC MENU language by using the cursor buttons.

Set TV standard

-----Preference Page----

Audio

Default

TV Type

Password

Disc Menu

Subtitle

Parental

AUTO

NTSC

PAL

DOLBY

Audio

Default

TV Type

Password

Disc Menu

Subtitle

Parental

-----Preference Page----

Preferred Audio Language

DOLBY

Audio

Default

TV Type

Password

Disc Menu

Subtitle

Parental

-----Preference Page----

Preferred Menu Language

DOLBY

SETUP

Spanish

German

French

English

Portuguese

Italian

Russian

Spanish

German

French

English

Portuguese

Italian

Russian

Audio

Default

TV Type

Password

Disc Menu

Subtitle

Parental

-----Preference Page----

Preferred Subtitle Language

OFF

DOLBY

Spanish

German

French

English

Portuguese

Italian

Russian

Page 33

-32-

5.PARENTAL

Select suitable parental guidance by the cursor buttons and conformed by pressing ENTER button.

6.PASSWORD

Select the change and press ENTER button. Type the old password (The initial factory code is ) and key in 4 characters password now you want to use, and retype again to confirm key in correctly.

1379

7.DEFAULTS

Select reset to become factory initial setting.

Audio

Default

TV Type

Password

Disc Menu

Subtitle

Parental

-----Preference Page----

Set Parental Control

1KID SAF

3PG

4PG13

5PGR

OFF

7NC 17

8 ADULT

DOLBY

Change Password

Audio

Default

TV Type

Password

Disc Menu

Subtitle

Parental

CHANGE

-----Preference Page----

DOLBY

Audio

Default

TV Type

Password

Disc Menu

Subtitle

Parental

-----Preference Page----

Load Fcatory Setting

RESET

DOLBY

DEFAULTS TABLE

GENERAL SETUP

SPEAKER SETUP

DOLBY DIGITAL

PREFERENCES

TV DISPLAY

ANGLE MARK

SPDIF OUPUT

OSD LANGUAGE

CAPTIONS

LAST MEMORY

DOWNMIX

DYNAMIC

TV TYPE

AUDIO

SUBTITLE

DISC MENU

PARENTAL

PASSWORD

NORMAL/LB

ENGLISH

STEREO

AUTO

ENGLISH

OFF

ENGLISH

8 ADULT

1379

OFF

SCR SAVER

SPDIF/RAM

SETUP

Page 34

TITLE

DVD 1-0:00:16

AUDIO ZOOMSUBTITLE

FLAT

DISC-IN

12: 16

SETUP

PAIR

DIAL

REDIAL

Bluetooth Operation

Bluetooth Car Kit User Manual

-33-

1). Place the CarKit and mobile handset in 3 meters apart.

3). Set your bluetooth phone to “discover”the Car Kit .

Following your phone’s instruction guide for details, active your mobile handset’s Bluetooth function, the handset will search for accessible Bluetooth devices.

4). Yourphone will find thisCar Kit .

Select this Car Kit from the list.

5). “8888”

“PAIR OK”

Enter passkey , then press “ ” to pair the Car Kit and the handset, the word , will display in the TFT .

1). If the pairing can not be completed within approximately 2 minutes , whiles the pairing mode is activated, and you will need to reattempt pairing (See steps 2-5 above) .

2). After pairing is completed, if the

ICON is stilling flash on the TFT , please follow the steps to reattempt pairing through your handset until the

ICON remains solid on the screen.

Important:

2. Using The Bluetooth Car Kit.

Once connecting is complete, you may access the following function. Some of the below mentioned functions only accessible for handset supported with hands-free profile.

6). “CONNECT”Select the from the list on the phone, if you connect successfully , the ICON remains solid on the screen , then you can operate the function of blue-tooth about the unite .

1.“Pair”ToYour Bluetooth Phone

Prior to using the Car Kit for the fist time, you must pair it with a Bluetooth-enabled mobile handset. The following steps describes pairing the instruction for a typical Bluetoothenabled mobile handset.

Touch the touch screen , the touch

operation menu will display.

Touch the “ ” section to select ,

it will display following as below :

Touch to select

2). Put the CarKit in pairing mode. POWER

“PAIR/ ”

“BLUETOOTH

PAIRING ”

a Pressthe buttontoturnON,

the ICON will flash on the TFT .

b. Touch the screen of “ ” range

or press the on the remote control until the word

display, it’s now ready

for pairing.

PAIR

“ ” and “ ” serves as the “ ” and “ ” button on your mobile handset .

Please note :

When you dial the wrong number, you can touch the screen to delete the wrong number . (You can also

press the “ ” button on the remote controltodoso.)

Note:

“ CLEAR ”

Touch the screen of “ ” range, (or press briefly the button on the remote control ) the word

will display on the TFT . then you can touch the number section on screen (or dial the number buttons on the remote control ), and then touch the “ ” section or press button to confirm .

“ PAIR/ ”

“DIAL NUMBERS”

“ PAIR/ ”

Makeacall

DIAL

Page 35

During conversation in progress, tune the Volume switch until you reach the desired volume level.

Adjust the Volume

1). Before using the function of the Bluetooth about the unit , please check your phone’s instruction guide or contact

phone manufacture if you are not sure if your phone supports the hands-free Bluetooth function .

2). When operating the function of bluetooth about the unit , you need make your call-phone and the unit successfully for one time. Afterwards, you only need to take on the power and the function of blue-tooth will work in three minutes automatically if you want to operate the function of blue-tooth .

3). If you want not to use the function of the Blue-tooth about the unit , you can select the Bluetooth OFF . (The method to see the page 16.)

Note:

-34-

Bluetooth Operation

Note:

please make sure it support the Bluetooth profile.A2DP & AVRCP

Touch the screen of “ ” section , the message will display as below :

DIAL

CLEAR

678 90

DIAL NUMBERS

123 45

DIAL

SEL VOLUME+VOLUME-

REJECT

PICKUP MUTE ON

CALL CONNECTED

touch to dial

Answer a call

After you hear the ring tone,

the incoming telephone number will display on the TFT LCD . Touch the screen of “ ” range to

listen or press the button on the remote control .

“PAIR/ ”

PICKUP

“PAIR/ ”

During talking mode , user can touch the screen of the “ ” range (or

press the button on the remote control ) to transfer the audio from the unit back to the mobile phone for privacy reason .

CallTransfer

PICKUP

In Bluetooth menu, touch the screen of “ ” range (or press briefly

button on remote control ) ,

the message display the

“REDIAL/ ”

“CALL HOOKED/CALL EJECTED”

End/Reject a call

REJECT

In Bluetooth menu, touch the “ ” (or press longer button on the remote control the

will

display on the TFT LCD.

“ REDIAL/ ”

“DIAL LAST CALL/DIAL OUT NOW ”

Redial last number

REDIAL

In Bluetooth menu, touch the screen of

range to select the , you can play the BT MUSIC from your mobile handset.

“MODE” “BT MUSIC”

Play BT music

MODE

SEL VOLUME+VOLUME-

MUTE ON

BLUETOOTH MP3

FLAT

DISC-IN

08: 16

S-WOOFER

touch to select

Page 36

Other Main Operation

Important Note:

To prevent damage to the USB device, do not remove or disconnect it during playback. it is also a good practice to remove the USB drive during disc playback.

In USB Playback mode

REPEAT

Use the UP, DOWN, RIGHT or LEFT buttons to navigate to and select files to play, and press ENTER to begin playback (or viewing, in the case of JPEG files). To skip to the next or last track, touch or press the or . Press the or buttons for Fast Forward or Fast Reverse playback.

play modes are also available by repeatedly pushing until the desired mode is found.

Following the diagram below, connect your USB device to the front panel USB port . If it is properly connected, the device will be mounted and start playing automatically.

-35-

Changing From USB to DISC Playback modes

If you are in USB Playback mode and wish to begin playback of a disc already in the player, touch the range on the touch screen or press the STOP on the remote once. Then touch GOTO range on the screen or press the GOTO on the remote and the player will switch to DVD/VCD/CD/MP3 Playback mode.

Changing From DISC to USB Playback Modes

If the disc present in the player is an MP3 disc, touch section on screen or press the STOP on remote once then touchorpresstheGOTOtoUSB playback.

If the disc present in the player is an DVD or VCD or CD disc, touch on the screen or press STOP twice on the remote then touch GOTO section on the screen or press the GOTO button on the remote to USB playback.

USB Operation

Page 37

Other Main Operation

Inserting and removinga SD or MMC card onthe frontpanel of unit .

SD/MMC card OPERATION

Mode change to SD/MMC card

After a SD or MMC card was inserted into the main unit card slot . the unit will starts playing the files contained on the memory card . Once the unit read the memory card successfully, the first file on the memory card will automatically start playback. Press the mode button repeatedly is allowing changing to other modes .

The unit can support playback MP3/WMA/JPEG/MP4 and Divx format which are stored into SD and MMC memory card . Please read below before you start the operation of memory card .

File Playback Operation

All the SD or MMC memory car playback operation function is same as the operation on . Please to operation for more details .

CD/MP3/WMA

“ MP3/WMA”

Change DISC to SD/MMC card

The operations are same as USB mode, refer to see USB operation .

Change SD/MMC cardto DISC

The operations are same as USB mode, refer to see USB operation .

-36-

Press in till heard a .“CLICK”

Removing the SD or MMC card .

Remove the memory card .

Inserting the SD or MMC card .

Insert the memory card into slot with label side facing backward .

Press in till heard a .“CLICK”

Label side facing backward

Page 38

Other Main Operation

00:56 04:07

003/112

Repeat one

Mp3

..............

woman

new

ton

1 Current track(file)(highlighted bar) 2

Elapsed playing time of the current track(

4 total playing time.

5 Operation mode icon. (Play),

(stop), (pause), (forward)

(reverse).

Current track (file) number/total

number of tracks(files) in the current folder.

not available for JPEG disc)

( not available for

JPEG disc)

Selected playback mode

Touch the screen, it will display the following as below : (when the parking brake is applied .)

MP3/WMA/JPEG/MPEG4 DISC PLAY

When you insert a disc which contains MP3, WMA or JPEG files, the different file types are detected, and a list of the files are produced, as shown in the diagram below.

-37-

In stop mode, touch the / / / sections on touch screen (or Use / / / on the remote control ) to select the item or folder, then touch the range (or press button on the remote control ) to confirm.

“OK”

ENTER

Touch the screen of range or press longer on the remote control repeatedly can select two kinds of repeat play mode.

Play the same song over and over again.

Play all songs on the disc, then repeats the entire disc over and over again .

“REPEAT ” “2/RPT”

REP-ONE:

REP ALL:

MODE

SEL VOLUME+VOLUME-

MUTE ON

MP3 02-0:36:20

FLAT

DISC-IN

08: 16

Touch repeatedly

FLAT

DISC-IN

12: 16

MP3 02-0:36:20

1. Touch the or range on the touch screen to skip a track ahead or back.

2. Press the or button on the remote control to skip a track ahead or back.

Moving To Another Track :

1. Touch briefly the “ / ” range on touch screen for fast forward / fast backward .

2. Press briefly the or button on the remote control for forward or backward .

Fast Forward/Fast Backward

Page 39

Specification

-38-

TFT Monitor:

Monitor Screen Size: 7 Inch Wide Number of Pixels: 480 X RGB X 234 pixels Color System: NTSC/PAL

NOTE:

Specifications and design are subject to modification, without notice, due to improvements in technology.

Audio Signal Output: 2ch&4ch line out Characteristics: (1)Frequency Response 20 Hz - 20 KHz

(2)S/N Ratio 90 dB (JIS) (3)Wow and Flutter Below measurable limits

Generall :

Supply Voltage: 12V DC (11V-15V) Current Consumption: Less than10 A Signal System: Compositive video 1.0Vp-p 75 Discs Played: (1)DVD-VIDEO Disc

5"(12 cm) single-sided, single-layer 5"(12 cm) single-sided, double-layer (2)Compact Disc (CD-DA, VIDEO CD) 5"(12cm) disc

BLUETOOTH:

Bluetooth specification: V1.2 Class 2 Bluetooth profile supported: Headset, Handsfree and A2DP & AVRCP profiles Range of frequency: 2.4GHz Spectrum

RADIO Section:

For 3 Bands For 2 Bands For 2 Bands

(Europe) (Europe) (U.S.A.)

FM FM FM Frequency Coverage: 87.5 to108 MHz 87.5 to108 MHz 87.5 to107.9 MHz IF: 10.7 MHz 10.7 MHz 10.7 MHz Sensitivity (S/N = 30 dB): 15 dBu 15 dBu 15dBu

MW MW AM Frequency Coverage: 522 to1620 KHz 522 to1620 KHz 530 to1710 KHz IF: 450 KHz 450 KHz 450 KHz Sensitivity (S/N = 20 dB): 40 dBu 40 dBu 40 dBu

Page 40

8880-J9000-04S

Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer.

Trouble Shooting

-39-

Inserting the disc in reverse direction

Press the RESET button. Front panel is not properly fixed into its place

The car ignition switch is not on

If the power supply is properly connected to the car accessory terminal,switch the ignition key to

"ACC"

The fuse is blown

Replace the fuse

Presence of disc inside the player.

Remove the disc in the player, then put a new one

Insert the compact disc with the label facing upward

The disc is extremely dirty or defective

Clean the disc or try to play a new one

Temperature inside the car is too high

Cool off or until the ambient temperature return to normal

The built-in microcomputer is not operating properly due to noise The antenna cable is not connected

Insert the antenna cable firmly

The signals are too weak

Select a station manually

SYMPTOM CAUSE SOLUTION

Television/video imageappears black-white

The color system is set incorrectly

Please switch to correct color system from menu

No television/video image appears

The unit is not connected to the parking brake detection switch

Make proper connection according to wire connection

“”

The parking brake is not engaged

For safety reasons no television /video images are displayed while the vehicle is moving. Engaging the parking brake will cause images to be displayed.

The operation keys do not work

The radio does not work

Disc can not be loaded or ejected

No power

No color in picture

Thediscformatisnot accordingto the TV-set used (PAL/NTSC)

Please the television mode of the choice accommodation

JPEG disc can not be played back

No JPEG files are recorded on the disc.

JPEG files are not recorded in a compliant formant

Change the disc Record JPEG files using a compliant application

Change the disc

Pyle PLD70BT Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual