PT-2001X
Owner’s Manual
PYLE PRO AMPLIFIERS
warranty registration card
Thank you for purchasing this PYLE
product. To activate your
warranty, please mail this card
within 10 days.
Name
Address
City, State ZIP
Model No. Serial # (if available)
Date of Purchase
Purchased at:
Music Products Store
Catalog Merchandiser
Sound Contractor/Installer Mail Order
Other
Please complete warranty card, detach and return
All PYLE PRO products are carefully constructed and tested before
shipment. Units purchased in the USA are warranted to be free of
defects in material and workmanship for two (2) years from the date
of purchase. This warranty is limited to the original retail purchaser
of the amplifier.
Should the unit fail due to factory defects in material or workmanship,
your unit will be repaired or replaced at the sole discretion of PYLE.
To obtain warranty service, you must first call our Consumer Return
Hotline at (718) 236-6948 to obtain a Return Authorization Number.
This R.A. # must appear on the outside of your package and on all
paperwork relating to your return.
When returning the unit to us for warranty service, it must be carefully
packed and shipped, prepaid, to:
R.A.#: _____________
PYLE PRO Service Center
1600 63rd Street
Brooklyn, NY 11204
You must also include the following items with your return:
• A copy of your sales receipt or other proof of purchase
• A brief letter, indicating the problem you are experiencing
with the product
• Include in your letter your return address, daytime phone
number and R.A. number
• Also include a check or money order for $20.00 for return
shipping, handling and insurance, or provide your Visa/MC
number with expiration date.
Our obligation under this warranty is limited to the repair or replacement
of the defective unit when it is returned to us prepaid. This warranty
will be considered void if the unit was tampered with, improperly
serviced or subject to misuse, neglect or accidental damage.
Limited Warranty
www.pyleaudio.com
PT-1201X Amplifier
PT-4001X Amplifier
PT-1601X Amplifier
PT-2001X Amplifier
FEATURES AND CONTROLS
1 Features and Controls, PT-1201X/1601X and PT-2001X/4001X
3 Installation Guidelines
3 Input Connections
3 Connecting a CD, DVD or tape player or tuner
3 Connecting an equalizer or signal processor
4 Stereo or Mono Inputs
4 Speaker connecitons
5 Bridged Mode Operation
6 Connecting to standard AC power
6 Mounting the amplifier
6 Turning the amplifier on
6 Using the power LED meter
6 Caring for your Pyle Pro Amplifier
6 Using the channel1 and channel2 output level controls
6 About the internal clip circuitry
7 Specifications
7 Limited warranty
TABLE OF CONTENTS
Please read this manual throughly before you attempt to set up and use the amplifier. It contains a
range of installation suggestions as well as instructions to ensure safe usage. Installed properly, you
can expect years of trouble-free service from this product.
i PYLE PRO PT-1201X/1601X/2001X/4001X Amplifier Owner’s Manual
FEATURES AND CONTROLS
Protection Circuit and Indicator
The indicator will be illuminated when
the amplifier is powered on and at turn-
on delay status; the indicator will be
turned off after internal outputs are
connected. The indicator will also be
illuminated when the amplifier has
abnormal problems, such as overload
or excessive heat.
FRONT PANEL, PT-1201X
Channel 1 and Channel 2
Output Level Controls
Lets you adjust the sound levels
for each channel.
Power On/Off
Your New Pyle Pro PT series PA
Amplifier gives you the power and
versatility you need in a professional
sound system.
The amplifier's wide frequency
response makes it suitable for
amplifying music or vocal program
material. It can be used for live bands,
office paging systems, public
announcements, or a variety of other
installations.
1-PYLE PRO PT-1201X/1601X/2001X/4001X Amplifier
Owner’s Manual
FRONT PANEL, PT-1601X/2001X
Protection Circuit and Indicator
The indicator will be illuminated when
the amplifier is powered on and at turn-
on delay status; the indicator will be
turned off after internal outputs are
connected. The indicator will also be
illuminated when the amplifier has
abnormal problems, such as overload
or excessive heat.
Channel 1 and Channel 2
Output Level Controls
Lets you adjust the sound levels
for each channel.
Power On/Off
Channel 1 and Channel 2 Power LED Display
Indicate the output signal level for each channel.
FRONT PANEL, PT-4001X
Protection Circuit and Indicator
The indicator will be illuminated when
the amplifier is powered on and at turn-
on delay status; the indicator will be
turned off after internal outputs are
connected. The indicator will also be
illuminated when the amplifier has
abnormal problems, such as overload
or excessive heat.
Channel 1 and Channel 2
Output Level Controls
Lets you adjust the sound levels
for each channel.
Clip Circuit and Indicator
This special circuitry protects the amplifier and speaker system
from being damaged by overdriving power levels. Indicator lights
remind the user to reduce the volume when amplifier output is
excessive.
Power On/Off
Channel 1 and Channel 2 Power LED Display
Indicate the output signal level for each channel.
Loading...