ProMariner ProSport Series Data Sheet

ProMa r

i ne

r

®

ProSportSeries

Recreational Sport Fishing & Boating On-Board Marine Battery Chargers

Distributed-On-Demand™ Technology

Automatically senses and distributes 100% of available charging amps to any one bank or combination of all banks

Automatic Multi-Stage Charging

Charges and conditions batteries with a built in safe maintenance mode for long and short term storage

Extruded Aluminum Housing

For superior heat transfer and durability

Waterproof and Shock Resistant

Saltwater tested for coastal sport fishing and boating

Lead Acid / Gel Battery Selectable

One time user selector provides optimum charge for either battery type

Dynamic Thermal Output Control

Provides appropriate charging amps to your batteries while maintaining recommended charger temperature

Built-in Protection

Reverse polarity, ignition & temperature protection

LED Power and Charge Indicators

At-a-glance power and charging status

Pre-wired for Easy Installation 2 Year Warranty

D i s t r i b u t e d - O n - D e m a n d™ T e c h n o l o g y

ProSport 1.5 Battery Maintainers

Fully Automatic

Designed to maintain 12 volt batteries up to 250 amp hours

Increase Performance

Precision regulated 13.4 VDC float mode

Can be left on for extended periods without overcharging or damaging batteries

ProSport 1.5 Portable

Will not drain battery if AC is removed LED status indicator

User adjustable for gel's

Built-in Safety

Reverse polarity protected Certified to U.L. 1236 Marine

1 Year Warranty

ProSport 1.5 On-Board

Specifications

model	part no.	volts	amps	banks	cable size	size L x W x H	weight	AC in
ProSport 1.5 Portable	10115	12	1.5	1	4’	2.2”x 2.5” x 3.3”	1.5 lbs	95-135
ProSport1.5 On-Board	10116	12	1.5	1	4’	2.2”x 3.5” x 3.9”	1.75 lbs	95-135
ProSport 6	41206	12	6	1	6’	5.75”x 7.25” x 2.5”	6 lbs	90-135
ProSport 8	41208	12/24	8	2	6’/6’	7”x 7.25” x 2.5”	8 lbs	90-135
ProSport 12	41212	12/24	12	2	6’/6’	8.5”x 7.25” x 2.5”	9 lbs	90-135
ProSport 20	41221	12/24	20	2	6’/6’	10.75”x 7.25” x 2.5”	10 lbs	90-135
ProSport 20 Plus	41220	12/24/36	20	3	6’/6’/6’	10.75”x 7.25” x 2.5”	11 lbs	90-135

Specifications subject to change without notice

ProMa r

i ne

r

®

Distributed-On-Demand™ Technology

Distributed-On-Demand™ Multi-Stage Charging Output

ProSport12

12 Amps Fully Distributed

10

+

2

Bank No. 2

Bank No. 1

Trolling

Engine

Battery 1

Start Battery 2

ProSport's Distributed-On-Demand™ Charging Technology ensures 100% of the available charging amps is fully utilized to meet the demand of each battery on-board. Let’s say your engine start battery only needs 2 amps from your “ProSport 12” (6/6) 2 bank charger; No problem the unused 4 amps will be automatically Distributed-On-Demand™ to battery bank # 2 providing a total of 10 amps to the trolling motor battery versus only 5 amps that the conventional 5/5 charger would provide. The competitive 5/5 charger has a 5 amp limit per bank .

Typical Leading Competitive Charging Output

Competitive 5/5 10 amp charger

Up to 5 Amps per Bank (5/5)

5

+

2

Bank No. 2

Bank No. 1

Trolling

Engine

Battery 1

Start Battery 2

Competitive chargers have an amp limitation per bank. As illustrated the (5/5) 10 amp charger can not transfer the unused 3 amps not required by the engine start battery, leaving only a maximum of 5 amps for the trolling motor battery.

Multi-Stage Charging Overview

ProSport Charging

During this mode the ProSport will use its available charging amps (as controlled by temperature) until battery voltage is raised to 14.6 VDC ( lead acid factory setting).

ProSport Conditioning

The ProSport will hold batteries at 14.6 VDC ( factory set for lead acid batteries) to complete charging while conditioning batteries by desulfating each battery connected. Upon completion the ProSport will go to into its maintenance mode.

ProSport Float / Maintenance

During this mode the red "Charging" LED will turn off indicating that the charging process is over and the charger is now maintaining your batteries on-board. Only the green LED will remain on, indicating Power On / Float-Maintenance mode. A precision 13.3 volts (lead acid factory setting) finishing voltage that maintains each battery (step down voltage regulation mode) which is perfect for short or long storage periods and will never overcharge your batteries.

Note: The only LED Indicator that will be on during the maintenance mode will be the green "Power" LED indicator.

Average Voltage

				14.6V
	14
				13.3V
	13
	12
<![if ! IE]> <![endif]>Volts	11	Charging	Conditioning	Maintenance / Float Mode

Above illustration reflects typical battery usage after a day of fishing. Trolling motor batteries are 50% discharged and not usable. Engine start battery is 90% charged from the engine charging system.

				Charg		er/Alter
				31V		nator Ou	tput
						Over
						Regu volt
			29V			Failed lar age
						Max.
		26.				Char
					Voltageger
			4V		C
		Battery			Altehar rger
			Cond		Char natorand
		25.2V	ition
				Full
		24V	50%
	23V
		Low
24	VDDVC
		ONLY

51201 ProMariner Plug Holder

87710

51060

51202 Universal Plug Holder

51070 & 51071

Optional Accessories

model	part no.	cable size	volts	banks
Handheld DC System Tester	87710	n/a	n/a	n/a
Remote Battery Bank Status Monitor	51060	10'	12	3
ProMariner AC Plug Holder (white)	51200	n/a	n/a	n/a
ProMariner AC Plug Holder (black)	51201	n/a	n/a	n/a
Universal AC Plug Holder (black)	51202	n/a	n/a	n/a
Universal AC Plug Holder (white)	51203	n/a	n/a	n/a
Battery Bank Cable Extender - 15'	51070	15'	n/a	n/a
Battery Bank Cable Extender - 5'	51071	5'	n/a	n/a