ProForm C 525, PFTL49406.1 User Manual

Model No. PFTL49406.1

Serial No.

Serial Number Decal

QUESTIONS?

As a manufacturer, we are committed to providing complete customer satisfaction. If you have questions, or if parts are damaged or missing, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY.

CALL TOLL-FREE:

1-888-533-1333

Mon.–Fri. 6 a.m.–6 p.m. MST Sat. 8 a.m.–4 p.m. MST

ON THE WEB: www.proformservice.com

CAUTION

Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference.

USER'S MANUAL

Visit our website at www.proform.com

new products, prizes, fitness tips, and much more!

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

PROFORM is a registered trademark of ICON IP, Inc.

2

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill.

1.It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.

2.Use the treadmill only as described.

3.Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side. Do not place the treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.

4.Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near water.

5.Do not operate the treadmill where aerosol products are used or where oxygen is being administered.

6.Keep children under the age of 12 and pets away from the treadmill at all times.

7.The treadmill should be used only by persons weighing 300 pounds or less.

8.Never allow more than one person on the treadmill at a time.

9.Wear appropriate exercise clothes when using the treadmill. Do not wear loose clothes that could become caught in the treadmill. Athletic support clothes are recommended for both men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in sandals.

10.When connecting the power cord (see page 12), plug the power cord into a surge suppressor (not included) and plug the surge suppressor into a grounded circuit capable of carrying 15 or more amps. No other appliance should be on the same circuit. Do not use an extension cord.

11.Use only a single-outlet surge suppressor that meets all of the specifications described on page 12. To purchase a surge suppressor, see your local PROFORM dealer or call the toll-free telephone number on the front cover of this manual and order part number 146148, or see your local electronics store.

12.Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may change speed, accelerate, or stop unexpectedly, which may result in a fall and serious injury.

13.Keep the power cord and the surge suppressor away from heated surfaces.

14.Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See TROUBLESHOOTING on page 22 if the treadmill is not working properly.)

15.Read, understand, and test the emergency stop procedure before using the treadmill (see HOW TO TURN ON THE POWER on page 14).

16.Never start the treadmill while you are standing on the walking belt. Always hold the handrails while using the treadmill.

17.The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed.

18.The pulse sensor is not a medical device. Various factors, including the user's movement, may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general.

3

19.Never leave the treadmill unattended while it is running. Always remove the key, unplug the power cord, and switch the reset/off circuit breaker to the off position when the treadmill is not in use. (See the drawing on page 5 for the location of the circuit breaker.)

20.Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 6, and HOW TO FOLD AND MOVE THE TREADMILL on page 20.) You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

21.When folding or moving the treadmill, make sure that the storage latch is fully closed.

22.Never insert any object into any opening on the treadmill.

23.Inspect and properly tighten all parts of the treadmill regularly.

24.DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized service representative only.

25.This treadmill is intended for in-home use only. Do not use this treadmill in a commercial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decals shown here have been placed on the treadmill. If a decal is missing, or if it is illegible, call the toll-free telephone number on the front cover of this manual and order a free replacement decal. Apply the decal in the location shown.

4

BEFORE YOU BEGIN

Thank you for selecting the revolutionary PROFORM® C 525 treadmill. The C 525 treadmill offers an impressive array of features designed to make your workouts at home more enjoyable and effective. And when you’re not exercising, the unique C 525 treadmill can be folded up, requiring less than half the floor space of other treadmills.

For your benefit, read this manual carefully before you use the treadmill. If you have questions after reading this manual, please see the front cover of this manual. To help us assist you, note the product model num-

ber and serial number before contacting us. The model number of the treadmill is PFTL49406.1. The serial number can be found on a decal attached to the treadmill (see the front cover of this manual for the location).

To avoid a registration fee for any service needed under warranty, you must register the treadmill at www.proformservice.com/registration.

Before reading further, please review the drawing below and familiarize yourself with the labeled parts.

	Fan
	Water Bottle Holder*	Console
	Handgrip Pulse Sensor	Key/Clip
		Handrail
	Storage Latch
	Upright	Reset/Off
		Circuit Breaker
	Walking Belt	Power Cord
	Foot Rail
		RIGHT SIDE
		Cushioned Walking Platform
		for maximum exercise comfort
	BACK	*No water bottle is included
	Rear Roller
	Adjustment Bolts
		5

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key and your own phillips screwdriver

.

Use the drawings below to identify the hardware used during assembly. Note: If a part is not in the parts bag, check to see if it has been preattached to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assembly.

3/4" Tek Screw (72)–2		3/4" Screw (23)–10		1" Tek Screw (77)–6	Cover Screw (52)–4
	Pulse Bar Star		Endcap Screw	Pulse Bar	Console Screw (67)–4
3/8" Star	Washer (65)–4		(108)–2	Screw (64)–4
Washer (83)–4
2 3/4" Upright Bolt (85)–2			1" Upright Bolt (84)–2		1 1/4" Bolt (63)–4

1. Make sure that the power cord is unplugged.	1
With the help of a second person, carefully tip	75	Wire
the treadmill onto its left side as shown. Partially
fold the Frame (26) so the treadmill is more sta-		75
ble. Do not fully fold the treadmill until it is
completely assembled.
Identify the Right Upright (76), which has a
sticker attached to it. Hold the Right Upright near	76
the Base (81). Next, locate the long wire inside of
the lower end of the Right Upright (see the inset
drawing). Secure the end of the wire to the end		81
of the Upright Wire (75). Then, pull the other end			85
of the wire until the end of the Wire Harness is
extending from the upper end of the Right	26
Upright.
		83	84
Thread a 2 3/4" Upright Bolt (85) and a 1" Upright
Bolt (84) with 3/8" Star Washers (83) into the bot-
tom of the Right Upright (76). Do not tighten the
Bolts yet.
	6

2. Slide a Front Endcap (80) onto the Base (81).	2
Partially tighten a Endcap Screw (108) into the
Front Endcap and the Base.					108
				81	80
Slide a Wheel Housing (86) onto the Base (81).
Attach the Wheel Housing with two 1” Tek
Screws (77) and a Base Pad (89) as shown.
Attach an additional Base Pad (89) to the Base		86
(81) with a 1” Tek Screw (77).					89
					77
			89
				77
3. With the help of a second person, carefully tip	3
the treadmill onto its right side as shown.
			81
Partially fold the Frame (26) so the treadmill is					70
more stable. Do not fully fold the treadmill
until it is completely assembled.
Hold the Left Upright (70) near the Base (81).
Thread a 2 3/4" Upright Bolt (85) and a 1” Upright		85
Bolt (84) with 3/8” Star Washers (83) into the bot-
tom of the Left Upright (70). Do not tighten the
Bolts yet.		84	83
					26
4. Slide a Front Endcap (80) onto the Base (81).	4
Partially tighten a Endcap Screw (108) into the
Front Endcap and the Base.	80	108
					84
Slide a Wheel Housing (86) onto the Base (81).
Attach the Wheel Housing with two 1” Tek
Screws (77) and a Base Pad (89) as shown.
Attach an additional Base Pad (89) to the Base	81				86
(81) with a 1” Tek Screws (77).		77
		89
			77	89
	7

5.With the help of a second person, carefully raise the Left Upright (70) and the Right Upright (not shown) to a vertical position.

Attach the Latch Housing (71) to the Left Upright (70) with two 3/4” Screws (23); start both

Screws and then tighten them. Note: Make sure that the large hole in the Latch Housing is on the indicated side.

Remove the knob from the pin. Make sure that the collar and the spring are on the pin. (Note: If there are two collars, place one on each side of the spring.) Next, insert the pin into the Latch Housing (71). Then, tighten the knob onto the pin.

6.Insert the tab on one of the Handrail Brackets

(79)into the indicated slot in the Left Upright

(70).Attach the Handrail Bracket with a 3/4” Tek Screw (72).

Attach the other Handrail Bracket to the Right Upright as described above.

See steps 2 and 4. Fully tighten the two Endcap Screws (108).

5

	23
	71
Knob		70
	23	Spring
	Large	Collar
	Hole	Pin

6

70

79

Slot

72

7. Identify the Left Handrail Cover (68), which as a	7		63
LEFT sticker on it. Slide the Left Handrail Cover
onto the upper end of one of the Handrails (62).		68
Slide one of the Handrail Caps (69) onto the			Post
lower end of the Handrail. Make sure that the		62
small hole in the Handrail Cap is on the bottom.
Slide the Handrail (62) onto the post on the Left			70		63
Upright (70) and onto the left Handrail Bracket
(not shown). Finger tighten two 1 1/4” Bolts (63)					74
into the Handrail and the post; do not fully			69	62
tighten the Bolts yet.
Tighten a 3/4” Screw (23) into the small hole in		23	Small Hole
the Handrail Cap (69) and into the Handrail					76
Bracket (not shown).
Attach the other Handrail (62) to the Right					69
Upright (76) as described above.
				23	Small
					Hole
	8

8. Make sure that the Upright Wire (75) is posi-	8
tioned at the side of the post on the Right
	64
Upright (76) as shown.
	65
Orient the Pulse Bar (66) onto the top of the Left
and Right Uprights (70, 76). Attach the Pulse Bar	63
with four Pulse Bar Screws (64) and four Pulse
				64
Bar Star Washers (65). Firmly tighten the four
Pulse Bar Screws.		66
				65
Firmly tighten the four 1 1/4” Bolts (63).
		70	63
			75	76
9. While a second person holds the console as-	9	Console
sembly near the Pulse Bar (66), attach the
		Assembly
Ground Wire (107) on the Pulse Bar to the
ground wire from the console assembly.
Connect the wire from the console assembly to	Ground		75
the Upright Wire (75). Make sure to connect
the connectors properly (see the inset draw-	Wire
ing). The connectors should slide together
easily and snap into place. If the connectors
do not slide together easily and snap into place,		107
turn one connector and then try again. IF THE
CONNECTORS ARE NOT CONNECTED			Wire
PROPERLY, THE CONSOLE MAY BE DAM-	66		75
AGED WHEN THE POWER IS TURNED ON.
Insert the connectors downward into the Right		76
Upright (76).
10.Set the console assembly on the Left Upright	10
(70) and Right Upright (76). Be careful not to		Console Assembly
pinch any wires.
Attach the console assembly to the Pulse Bar
(66) with six 3/4” Screws (23). Start all six 3/4”
Screws, but do not tighten them yet.
		66
	23	23	23
	75
	76		70
	9

11.Tighten four Console Screws (67) into the Left and Right Uprights (70, 76) and the console assembly. Start all four Screws, before tightening them; do not overtighten the Console Screws.

Tighten all six 3/4” Screws (23) used in step 10; do not overtighten the Screws.

12.Slide the Left Handrail Cover (68) up against the console assembly. Tighten two Cover Screws (52) into the Left Handrail Cover and the Left Upright (70); be careful not to overtighten the

Cover Screws.

Slide the Right Handrail Cover (74) up against the console assembly. Tighten two Cover Screws (52) into the Right Handrail Cover and the Right Upright (76); be careful not to overtighten the

Cover Screws.

13.Lower the Uprights (70, 76) as shown.

See the inset drawing. Push the Uprights (70, 76) sideways so that the treadmill Frame (26) is centered between the Uprights.

Firmly tighten the Upright Bolts (84, 85) on each side of the treadmill.

11	Console Assembly
67	67
76	70
12
Console
Assembly
68
52	70
	74
	76
	52
13	Side View
	70, 76

85

84 26

View From Above

70 26 76

10