ENGINEERING DATA SHEET
RADiAtOR
The Radiator™ is a 24” x 24” (61cm x 61cm) multi purpose diffuser
used to break up high frequency sound energy in a variety of
applications.
The Radiator can be installed into standard drop-ceiling grids to act
as a portal to the plenum above, linked together and suspended from
the ceiling using included coupling hardware or hung directly on the
wall surface using hidden keyhole mounting locations on the frame.
It can even be used in front of windows to eliminate reections while
maintaining natural light and sight lines.
The Radiator ships assembled in a natural birch nish.
SPECIFICATIONS:
ORDER NUMBER Z840-2500-00
EFFECTIVE FREQUENCY
RANGE
OUTER FRAME MATERIAL
INNER CELL MATERIAL Baltic Birch plywood 0.25” (6mm) thick. Laquered natural wood nish
OUTER DIMENSION
CELL DIMENSION 2.64” (67mm) x 2.64” (67mm) x 3” (76mm)
565Hz to 2.2KHz
Baltic Birch Plywood with locking dovetail corner joints. 0.5” (13mm) thick,
Laquered natural wood nish
23.74” (603mm) x 23.74” (603mm) x 3” (76mm)
Fits T-Bar drop ceiling grids
WEIGHT 8.2 lbs (3.7 kg)
MOUNTING HARDWARE
23 5/8” (1219mm)
Woodscrews and drywall anchors included for wall mounting.
Coupling hardware allows Radiator to be bolted together to create diffusion
arrays. Two coupling bolts included.
23 5/8” (1219mm)
APPLICATIONS:
3” (76mm)
Clever ‘keyhole’ hardware for
fast wall mounting.
Solid construction using dovetail
joinery and baltic birch plywood.
Six Radiator diffusers are bolted together and
suspended above the mix position in a studio
control room.
Primacoustic is a division of Radial Engineering Ltd. • 1588 Kebet Way Port Coquitlam, BC V3C 5M5 • Tel: 604-942-1001 Fax: 604-942-1010
www.primacoustic.com • info@primacoustic.com • Primacoustic Engineering Data Sheet • Part #R870 2200 00 • Copyright © 2016 • Subject to change without notice.
Eight Radiator diffusers are bolted together
and hung on the wall to create ambience in
the studio.
Radiator diffusers surround light xtures in a
hotel lobby ceiling.
Loading...