Dynamic DX
Dynamic DX
Specialty Controls Remote
(SCR)
Basic Operation Instructions
2 Basic Operation Manual SCR
Copyright © 2001
Pride Mobility Products Corporation
This manual describes basic operation for the Dynamic DX Specialty Controls
Remote (SCR) only and must be read in conjunction with the owners manual
supplied with your power chair. Please read both manuals in their entirety
before operating the SCR or your power chair.
This manual is intended as a supplement to the in-service training provided
by your authorized provider. If you have any questions or problems regarding
the SCR, please contact your authorized provider.
IMPORTANT NOTICE
SCR Basic Operation Manual 3
TABLE OF CONTENTS
INTRODUCTION ................................................................................ 4
Dynamic DX Specialty Controls Remote (SCR)....................................... 4
SCR CONTROLS ................................................................................ 6
STANDARD MODE CONFIGURATION...................................... 6
Driving in Standard Mode Configuration .................................................. 6
TIMEOUT FUNCTION ...................................................................... 7
SEAT CONTROL................................................................................. 7
Tilt Mode ................................................................................................... 7
Recline Mode............................................................................................. 8
Left Leg Rest Mode ................................................................................... 8
Right Leg Rest Mode................................................................................. 9
4 Basic Operation Manual SCR
INTRODUCTION
Welcome to Quantum Rehab, a Division of Pride Mobility Products
Corporation. Quantum Rehab is dedicated to the customization of power
chairs for users with advanced rehabilitation and mobility issues. Quantum
Rehab also expands possibilities for enhanced healthcare attendant control
over power chair functions to provide a secondary level of support for our
customers where necessary.
The Dynamic DX Specialty Controls Remote (SCR)
The Dynamic DX Specialty Controls Remote (SCR) allows users to control
a wide range of on-chair and off-chair functions. SCR units come pre-
programmed in the Standard Mode Configuration explained in this manual,
but are not limited to it. Please contact your authorized provider for more
information on programming alternatives.
The SCR is used in conjunction with input devices such as joysticks, touch
pads, lap trays, head arrays, Buddy Buttons, Sip-N-Puff systems, etc. The
purpose of the SCR is to enhance and expand input device function, so that
the user can do more with his/her power chair.
This manual is designed to explain basic operation for the following functions:
1. SCR Controls
- Utilizes the On/Off Switch and the Mode Switch to power the SCR and
choose pre-programmed functions.
2. Standard Mode Configuration
- Allows the user to choose and control the driving speed of his/her power
chair using one of five modes.
3. Timeout Function
- This is a safety feature built in to the programming of the SCR.
4. Seat Control
- Allows the user to control seat actuator adjustment.
Loading...