S3.25
Leg Press Option
Assembly Instructions
S3.25 Leg Press Option Assembly Instructions
Important Safety Instructions
Before beginning any fitness program, you should obtain a complete physical examination from your physician.
Il est conseillé de subir un examen médical complet avant d’entreprendre tout programme d’exercise. Si vous avez des étourdissements ou des faiblesses, arrêtez les exercices immédiatement.
When using exercise equipment, basic precautions should always be taken, including the following:
•Read all instructions before using the Leg Press Option. These instructions are written to ensure your safety and to protect the unit.
•Do not allow children on or near the equipment.
•Use the equipment only for its intended purpose as described in this guide. Do not use accessory attachments that are not recommended by the manufacturer: such attachments might cause injuries.
•Wear proper exercise clothing and shoes for your workout—no loose clothing.
•Use care when getting on or off the unit.
•Do not overexert yourself or work to exhaustion.
•Never drop or insert objects into any opening
in the equipment. Keep hands away from moving parts.
•Always check the unit and its cables before each use. Make sure that all fasteners and cables are secure and in good working condition.
•Do not use the equipment outdoors.
Personal Safety During Assembly
•It is strongly recommended that a qualified dealer assemble the equipment. Assistance is required.
•Read each step in the assembly instructions and follow the steps in sequence. Do not skip ahead. If you skip ahead, you may learn later that you have to disassemble components and that you may have damaged the equipment.
•Assemble and operate the Leg Press Option on a solid, level surface. Locate the unit a few feet from walls or furniture to provide easy access.
The Leg Press Option is designed for your enjoyment. By following these precautions and using common sense, you will have many safe and pleasurable hours of healthful exercise with your Precor equipment.
Obtaining Service
Do not attempt to service the Leg Press Option yourself. This unit does not contain any user-serviceable parts.
For information about product operation or service, check out the Precor web site at www.precor.com or contact an authorized Precor dealer or a Precor factory-authorized service company. To locate the dealer or service person nearest you, call 1-800-4-PRECOR.
If you call or e-mail Customer Service, have your serial and part numbers available.
You can find the serial number printed on a label on the Upright Seat Support of the Leg Press Option. For future reference, write the serial number in the space below.
Serial number: _____________
•If you feel any pain or abnormal symptoms, stop your workout immediately and consult your physician.
•Never operate the unit when it has been dropped or damaged. Return the equipment to a service center for examination and repair.
IMPORTANT SAFETY INSTRUCTIONS
Important Safety Instructions
page 2
S3.25 Leg Press Option Assembly Instructions
Table of Contents |
|
Important Safety Instructions............................................................... |
2 |
Personal Safety During Assembly .................................................................................. |
2 |
Obtaining Service .......................................................................................................... |
2 |
1
2
3
Before You Begin ................................................................................... |
4 |
Unpacking the Equipment .............................................................................................. |
4 |
Preparations........................................................................................... |
5 |
Required Tools ............................................................................................................... |
5 |
Installation Requirements .............................................................................................. |
5 |
Assembly Tips ............................................................................................................... |
5 |
Assembly Instructions .......................................................................... |
6 |
1. Remove the Shroud ................................................................................................... |
7 |
2. Attach the Cross Brace to the S3.25 .......................................................................... |
8 |
3. Assemble the Frame .................................................................................................. |
9 |
4. Assemble the Seat Pads ............................................................................................ |
11 |
5. Route the Cable ......................................................................................................... |
12 |
6. Assemble the Cable and Pulleys ................................................................................ |
13 |
7. Replace the Shroud ................................................................................................... |
15 |
|
Adjustments ........................................................................................... |
16 |
4 |
1. Stretch the Cable ....................................................................................................... |
16 |
|
2. Rotate the Cam Washer ............................................................................................. |
17 |
|
3. Adjust the Rubber Bumper on the Leg Press Option .................................................. |
18 |
|
Warranty Card ....................................................................... |
Back cover |
|
Specifications ....................................................................... |
Back cover |
Table of Contents
page 3
S3.25 Leg Press Option Assembly Instructions
1Before You Begin
Thank you for purchasing the Leg Press Option for your Precor equipment. This option will add a new dimension to your strength-training regimen. For proper installation, please read this guide thoroughly and follow the assembly instructions.
Unpacking the Equipment
The Leg Press Option is carefully tested and inspected before shipment. Precor ships the unit in several pieces that require assembly. Two people are required to assemble this equipment. Ask for assistance during the assembly process.
•Review the Installation Requirements on the next page.
•Carefully unpack the pieces and lay them on the floor near the place where you plan to use the equipment.
If any items are missing, contact the dealer from whom you purchased the unit or call 1-800-4-PRECOR to find the dealer nearest you.
Before You Begin
page 4
S3.25 Leg Press Option Assembly Instructions
2 Preparations
CAUTION: To set up this equipment, you will need assistance. Do not attempt assembly by yourself.
You must review and follow the instructions in this guide. If you do not assemble and use the Leg Press Option according to the following guidelines, you could void the Precor limited warranty.
Required Tools
You need to obtain these tools before assembling the unit:
¾-inch socket wrench
¾-inch box-end wrench
⁄-inch socket wrench
⁄-inch box-end wrench
Two adjustable pliers or crescent wrenches
Standard set of metric Allen wrenches
Utility knife or scissors
Measuring tape
Installation Requirements
Follow these installation requirements when assembling the unit:
•Fill out and mail the limited warranty card. The warranty card is found on the back cover of this guide.
•Set up the Leg Press Option on a solid, flat surface. A smooth, flat surface under the unit helps keep it level. A level unit has fewer malfunctions.
•Provide ample space around the machine. Open space around the machine allows for easier access.
•Insert all bolts in the same direction. For aesthetic purposes, insert all the bolts in the same direction unless specified (in text or illustrations) to do otherwise.
•Leave room for adjustments. Tighten fasteners such as bolts, nuts, and screws, so that the unit is stable, but leave room for adjustments. Do not fully tighten fasteners until instructed in the assembly steps to do so.
Assembly Tips
•A 6-inch scale is provided at the bottom of every assembly instruction page. Use this scale to identify the correct size bolts and spacers. The head of a bolt is not used in measuring the length of a bolt.
To find out the length of a particular bolt, measure its shank (the long, narrow part beneath the head). Refer to the following diagram.
•Read all caution notes on each page before completing that step.
Bolt head
|
To determine the |
Bolt threads |
length of a bolt, |
|
measure its shank. |
Shank 
•Some pieces have extra holes that you will not use. Use only those holes indicated in the instructions and illustrations.
•While you may be able to assemble the Leg Press Option by using the illustrations only, refer to the text for important safety cautions and notes.
Preparations
page 5
S3.25 Leg Press Option Assembly Instructions
3 AssemblyInstructions
Assembly of the Leg Press Option takes professional installers about 1 hour to complete. If this is the first time you have assembled this type of equipment, plan on significantly more time.
Professional installers are highly recommended!
CAUTION: Obtain assistance! Do not attempt to assemble the Leg Press Option by yourself. Because of the weight and size of the Leg Press Option, you could be injured or damage the
equipment. Review the Installation Requirements on page 5 before proceeding.
The Leg Press Option comes in one box. It can be installed on either the S3.25 or S3.45 Precor Strength Training Equipment. Note that the location where you attach the Cross Brace to the Seat Frame differs. As you read through the assembly instructions, be sure that you are using the correct mounting holes for your unit.
Be careful to assemble the components in the sequence presented in this guide.
Note: As with any assembled part, proper alignment and adjustment is critical. While tightening the fasteners, be sure to leave room for adjustments. Do not fully tighten the fasteners until instructed to do so.
1 |
2 |
3 |
4 |
5 |
6 |
Assembly Instructions
page 6
Loading...