Precor C954, C956 User Manual

0 (0)

Commercial Treadmill Owner’s Manual

C954

C956

C O M M E R C I A L P R O D U C T S D I V I S I O N

Before You Begin

Thank you for purchasing the Precor C956 or C954 Commercial Treadmill. Built to the exacting standards of the health club environment, the treadmill is intended for commercial use and can withstand the rigors of daily club use with little maintenance.

Before using Precor equipment, we urge you to familiarize yourself and staff with the entire Owner’s Manual. Understanding this manual will help you and your customers use the treadmill safely and successfully.

ABOUT THIS MANUAL

Inside this manual, you will find instructions for assembling and using the treadmill. To maximize the use of the unit, please study this manual thoroughly. The manual uses the following conventions for identifying special information:

“Note:” Contains additional information that applies to the preceding text.

“Important:” Indicates information to which you should pay special attention.

“CAUTION:” Indicates steps or information necessary to prevent harm to yourself or damage to the equipment.

“WARNING:” Provides instructions to prevent electrical damage to the equipment and prevent injuries to yourself.

“DANGER:” Indicates steps you must take to prevent electrical shock.

OBTAINING SERVICE

Do not attempt to service the treadmill yourself except for the maintenance tasks described in this manual.The treadmill does not contain any user-serviceable parts.

For information about product operation or service, visit the Precor Web Site at www.precor.com or contact an authorized Precor dealer or a Precor Factory Authorized Service Company. To locate the dealer or service person nearest you, call 1-888-665-4404.

The serial number on the treadmill is printed on a label located on the base frame. To locate the serial number, verify that the treadmill is turned OFF.Then, stand at the rear of the treadmill and face the display console, kneel down and look under the treadmill on the inboard-side of the running bed at the left, rear corner. For future reference, write the serial and model number and the date of purchase in the space provided below.

Model/unit #: _____ Serial #: __________________ Date purchased: _____

Model/unit #: _____ Serial #: __________________ Date purchased: ____

If you have questions regarding the treadmill, use the model and serial number whenever you contact Precor Customer Service, your Precor dealer, or service person.

page 2

C O M M E R C I A L P R O D U C T S D I V I S I O N

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be taken, including the following:

•Read all instructions before using the treadmill. These instructions are written to ensure your safety and to protect the unit.

•To ensure the proper use and safety of the treadmill, make sure that all users read this manual. Please make this manual a part of your training program.

Before beginning any fitness program, users of this equipment should obtain a complete physical examination from a qualified physician.

Il est conseillé de subir un examen médical complet avant d’entreprendre tout programme d’exercise. Si vous avez des étourdissements ou des faiblesses, arrêtez les exercices immédiatement.

DANGER To reduce the risk of electrical shock, always unplug the unit from its power source before cleaning or performing any maintenance tasks.

WARNING To reduce the risk of burns, fire, electric shock, or injury to persons, take the following precautions:

•When it is plugged in, do not leave the treadmill unattended. Unplug the treadmill from the outlet when it is not in use, and before putting on or taking off parts.

•Do not allow children on or near the treadmill.

•Use the treadmill only for its intended use as described in this manual. Do not use accessory attachments that are not recommended by the manufacturer— such attachments might cause injuries.

•Never operate the unit if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped in water. Return the treadmill to a service center for examination and repair.

•Keep the power cord away from heated surfaces. Keep hands away from moving parts.

•Never block the air openings on the hood while operating the treadmill. Keep the air openings clean and free of lint, hair, or anything that might impede the free flow of air. Never drop or insert objects into any opening.

•Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

•Do not use outdoors.

•Turn the power switch to the OFF (O) position, when the treadmill is not in use for an extended period of time. Then, remove the power plug from the outlet.

WARNING Connect the treadmill to a properly grounded outlet only. See

Grounding Instructions on page 4.

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

page 3

C O M M E R C I A L P R O D U C T S D I V I S I O N

GROUNDING INSTRUCTIONS

The C956 or C954 treadmill must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current which reduces the risk of electrical shock. The C956 or C954 treadmill is equipped with a power cord having an equipment-grounding conductor and a grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. If you do not follow these Grounding Instructions, you could void the Precor limited warranty.

DANGER

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the treadmill is properly grounded. Do not modify the plug provided with the treadmill—if it doesn’t fit the outlet, get a proper outlet installed by a qualified technician.

Diagram A

Correct power outlet for U.S. Markets: 20 amp 120-volt and 240-volt plugs.

120-volt grounding plug

240-volt grounding plug

120V Units Designated for U.S. Markets

The C956 or C954 treadmill must be connected to a 20 amp dedicated circuit having a nominal rating of 120-volts. The treadmill’s grounding plug looks like the plug illustrated in Diagram A. The power outlet must have the same configuration as the plug. No adapter should be used with this product.

240V Units Designated for U.S. Markets

The C956 or C954 treadmill must be connected to a 20 amp dedicated circuit having a nominal rating of 240-volts. The treadmill is factory-equipped with a specific power supply cord to permit connection to a proper electric circuit. Make sure that the treadmill is connected to an outlet having the same configurations as the plug. See Diagram A. No adapter should be used with this product. If the treadmill must be reconnected for use on a different type of electrical circuit, the reconnection must be made by qualified service personnel.

SAFETY APPROVAL

When identified with the ETL-c logo, the treadmill has been tested and conforms to the requirements of CAN/CSA-E-335-1/2-94, Safety of Household and Similar Electrical Appliances.

page 4

C O M M E R C I A L P R O D U C T S D I V I S I O N

RFI — RADIO FREQUENCY INTERFERENCE

Federal Communications Commission Part 15

The treadmill has been tested and found to comply with,

•the IEC EMC Directive (international electromagnetic compatibility certification)

•the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. The treadmill generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the owner’s manual instructions, may cause harmful interference to radio communications. Operation of the treadmill in a residential area is likely to cause harmful interference. If this occurs, the user will be required to correct the interference at his or her own expense.

Per FCC rules, changes or modifications to the CAUTION treadmill not expressly approved by Precor, could

void the user’s authority to operate the equipment.

Canadian Department of Communications

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioéélectriques dépassant les limites applicables aux appareils numériques de la Class A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministére des Communications du Canada.

EUROPEAN APPLICATIONS

This product conforms to the requirements of the European Council Directive 89/336/ EEC, Electromagnetic Compatibility and has been tested to the following standards:

EN55022, Limits & Methods of Measurement of Radio Interference, Information Technology Equipment (Class A).

EN50082-1, Generic Immunity Standard for Residential, Commercial and Light Industrial Products (Class A).

This product additionally conforms to the requirements of the European Council Directive 73/23/EEC, LowVoltage Directive and has been tested to the following standard:

IEC 335-1, Safety of Household and similar Electrical Appliances.

European Applications − 240 Volt Units Only

This product has been tested to the requirements of EN55022, “Limits & Methods of Measurement of Radio Interference, Information Technology Equipment.” Per that standard, the C956 or C954 treadmills are a Class A product. In a domestic environment, these products may cause radio interference, in which case the user is responsible to take adequate measures to alleviate the interference.

page 5

C O M M E R C I A L P R O D U C T S D I V I S I O N

PERSONAL SAFETY

When using the treadmill, take the following precautions:

•Do not allow children on or near the treadmill. Do not leave children unsupervised around the treadmill.

•Assemble and operate the treadmill on a solid, surface. Locate the treadmill a few feet from walls or furniture. Keep the area behind the treadmill clear.

•Turn OFF (O) and unplug the treadmill when adjusting or working near the rear roller. Do not adjust the running belt when someone is standing on the unit.

•Keep all electrical components, such as the motor, power cord, and I/O switch, away from liquids to prevent shock. Do not set anything on the handrail, display console, or hood. Place liquids only in the appropriate receptacles.

•The security clip should be attached at waist level prior to beginning a workout. A cord connects the security clip to the red STOP button on the console. If a user encounters difficulties, the running belt can be stopped by pulling on the cord. To resume operation, press the Speed ▲ key.

•Maintain the treadmill in good working condition. (Refer to the Maintenance section). Run through a check list prior to each use. Make sure that all fasteners are secure and the belt is cleaned and running smoothly.

•Wear proper exercise clothing and shoes during a workout—no loose clothing. Tie long hair back. Keep all loose towels away from the running surface. The running belt will not stop immediately if an object becomes caught in the belt or rollers.

•Use care when getting on or off the treadmill. Use the handrail(s) whenever possible. Step onto the running belt when the speed is at 1 mph (1.6 kph). Never step off the treadmill while the running belt is moving.

•Before the running belt begins moving (prior to a workout), and after it stops (at the end of a workout), straddle the belt by placing your feet firmly on the right and left side platforms.

•Never turn ON the treadmill when someone is standing on the machine.

•Keep your body and head facing forward. Never attempt to turn around on the treadmill when the running belt is moving.

•Do not rock the unit. Do not stand on the handrails, display console, or hood.

•Do not attempt to service the treadmill yourself other than the assembly and maintenance instructions found in this manual. Refer to Obtaining Service.

•Do not overexert yourself or work to exhaustion. If you feel any pain or abnormal symptoms, stop your workout immediately and consult your physician.

PRECOR HEART RATE OPTIONS—SAFETY GUIDELINES

The Precor Heart Rate Options are created and designed exclusively for Precor products. The equipment is very sensitive—you should use the heart rate options with this in mind and take time to read the guidelines found in this owner’s manual. If you purchased the POLAR® chest strap, review the guidelines found in the

Precor Heart Rate Option Owner’s Manual that is supplied with that option.

page 6

C O M M E R C I A L	P R O D U C T S	D I V I S I O N
Table of Contents
Before You Begin ..............................................................		2
About this Manual ..................................................................		2
Obtaining Service ...................................................................		2
Important Safety Instructions .................................................		3
Grounding Instructions ...........................................................		4
Safety Approval .....................................................................		4
RFI — Radio Frequency Interference .....................................		5
European Applications ...........................................................		5
Personal Safety ......................................................................		6
Precor Heart Rate Option - Safety Guidelines ........................		6
Unpacking the Treadmill ..................................................		9
Standard Equipment ...............................................................		9
Optional Equipment ................................................................		9
Hardware Kit ..........................................................................		10
Acquire the Appropriate Tools .................................................		10
Setting Up the Treadmill ................................................		11
Installation Requirements ......................................................		11
Assembly Instructions ..........................................................		11
Turning the Unit ON and OFF ................................................		18
Checking the Alignment of the Running Belt .........................		19
Club Information ............................................................		20
Changing the Club Settings ...................................................		20
Selecting the Language .........................................................		20
Determining the Units of Measure ........................................		21
Determining the Club Speed Limit ..........................................		22
Setting a Workout Time Limit ................................................		22
Setting a Pause Time Limit ....................................................		22
Changing the C956 Custom Courses ....................................		23
Viewing the Odometer, Hours of Use,
Software Version, and Error Log ...........................................		24
Using CSAFE Standard Equipment ........................................		24

page 7

C O M M E R C I A L	P R O D U C T S		D I V I S I O N
Table of Contents
The C956/C954 Display ..................................................			25
Features on the Display Console ............................................			25
Top Display Windows ............................................................			25
Center Display Window (C956 only) .....................................			26
Elongated Center Display (C956 and C954) ............................			26
Keys on the Display Console ................................................			28
Keypad Tips ...........................................................................			28
Exercising on the Treadmill ...........................................			32
Using the Security Clip .........................................................			32
Pause, Cool Down, Summary and Exit Features ....................			32
Quick Steps to Working Out	..................................................		34
Workout Tips .........................................................................			34
Cooling Down After a Workout ..............................................			35
Courses ...........................................................................			36
The Heart Rate Features .......................................................			36
Utilizing the Smart Rate®Feature ..........................................			36
Manual Mode and the Quick Start Key .................................			37
The Track Course ..................................................................			38
Preprogrammed Courses ......................................................			38
Interval Course .....................................................................			38
Custom Courses ...................................................................			39
Random Course ....................................................................			39
Heart Rate Course ................................................................			40
Weight Loss Course ..............................................................			41
Goal-based Courses .............................................................			41
Maintenance....................................................................			42
Cleaning the Equipment ........................................................			42
Aligning the Running Belt ......................................................			42
Storing the POLAR® Chest Strap ..........................................			43
Servicing the Treadmill ..........................................................			43
Long Term Storage ................................................................			43
Specifications ............................................................		back cover

page 8

C O M M E R C I A L P R O D U C T S D I V I S I O N

Unpacking the Treadmill

The treadmill is carefully tested and inspected before shipment so it should arrive in good operating condition. Precor ships the unit in the following pieces:

•base frame assembly

•hood

•front assembly (includes 2 upright supports and display console)

•handrails (one for each side)

•owner’s manual and hardware kit

CAUTION:The treadmill weighs over 350 pounds (157 kilograms).To avoid injury and ensure the safety of the unit and yourself, we suggest that you get assistance before removing the unit from the box.

If any items are missing, contact your Precor Commercial Products Service Representative at 1-888-665-4404.

STANDARD EQUIPMENT

Both the C956 and C954 treadmills incorporate the Precor Smart Rate® and Heart Rate features into it’s display consoles. Devices, such as FittLinxx that are CSAFE compatible, can also be attached.

Note: An optional POLAR®chest strap must be worn to transmit a user’s heart rate to the display console’s receiver. Another option, Precor “touch” heart rate can be purchased (at point of sale) and provides electrode strips on the center handrail. When a user places his or her hands over the strips and grasps the handrail, a heart rate is transmitted to the receiver.

OPTIONAL EQUIPMENT

Optional equipment that you can purchase through your dealer includes:

•POLAR® chest strap

•Touch Heart Rate (separate display console)

•Long handrails

If you are interested in obtaining Precor option kits for your unit, check with you dealer. To locate the dealer nearest you, call 1-888-665-4404. For customer service, see Obtaining Service on page 2.

page 9

C O M M E R C I A L P R O D U C T S D I V I S I O N

HARDWARE KIT

After unpacking the treadmill, open the hardware kit and make sure that you have the following items shown in Diagram 1.

(A) 20 — 1” long buttonhead screws

(B) 14 — washers

(D) 1/4” hex key — belt adjustment

(E) 3/16” hex key — mount uprights, display and handrails to base frame

(F) 5/32” hex key — install handrails to display and hood to base

Diagram 1 C956/C954 Hardware Kit

B D

Note: After assembling the treadmill, be sure to store the hex keys in a secure place.The tools are used for specific maintenance procedures that are described in this manual.

ACQUIRE THE APPROPRIATE TOOLS

Obtain the following tools before assembling the treadmill.

Wire cutter

Bubble level

Medium weight string [about 1 foot (30 cm)]

Strong adhesive tape

SAE Standard socket set with a ratchet or 8” Crescent wrench

page 10

C O M M E R C I A L P R O D U C T S D I V I S I O N

Setting Up the Treadmill

You do not need any special knowledge or experience to set up the treadmill. However, you will need assistance. Because of the size and weight of the treadmill, it is recommended that at least three adult persons assemble it.

INSTALLATION REQUIREMENTS

Follow these installation requirements when installing the treadmill. If you do not install the treadmill according to the following guidelines, you could void the Precor limited warranty.

•Set up the treadmill on a solid, flat surface. Unpack and assemble the treadmill close to where you plan to use it. Make sure that the flat surface under the unit is smooth and level. A level unit is required for the user’s safety and proper operation.

•Provide ample space around the unit. Open space around the unit makes for a safer mount and dismount.

•Fill out and mail the limited warranty card. Be sure that the treadmill is turned OFF. To locate the serial number, place yourself at the rear of the treadmill facing the display console, kneel down and look under the treadmill on the inboard-side of the running bed of the left, rear corner. Write the serial number onto the Precor limited warranty card found on the back cover of this manual. Refer to Obtaining Service on page 2 and write the number(s) there as well.

•Use the appropriate voltage, dedicated circuit, and grounding as specified on the treadmill. The treadmill is available in both 120-volt and 240volt models. Refer to the treadmill’s identification label to determine the voltage that your treadmill requires. Both the 120-volt and 240-volt models require a dedicated 20 amp circuit.

CAUTION: Do not use a non-grounded outlet or transformer. Do not remove or otherwise bypass the plug with an adapter. Electrical damage can occur and void the Precor limited warranty if the treadmill is connected to an improper power source.

ASSEMBLY INSTRUCTIONS

Take the following steps to assemble the treadmill. We recommend at least three people help with assembling the unit.

Note: The C956 and C954 treadmills have the same assembly instructions. The differences appear in the display console and course programs.

1.Obtain assistance. Ask for assistance to help assemble the treadmill. Have the assistant(s) help place the shipping carton close to the location where you plan to use the treadmill. Breakdown the side walls of the shipping carton so that they lie flat. Remove the loose contents.

page 11

C O M M E R C I A L P R O D U C T S D I V I S I O N

CAUTION:To avoid injury and ensure your safety, get assistance before lifting the treadmill off the pallet and rolling it onto the floor. Do not drop the unit.

2.Remove the treadmill from its shipping pallet. Eight fasteners secure the treadmill to its pallet. Use a socket and crescent wrench to loosen and remove the 4 lag bolts that hold the treadmill to the pallet and the 4 screws (2 on each side) that thread through the bracket and into the unit. Discard the fasteners. Once the fasteners have been removed, obtain several assistants to lift the treadmill off the shipping pallet.

3.Make sure that the power is OFF. Check the ON/OFF power switch on the front of the base assembly. Place the switch in the O (OFF) position. Make sure that the treadmill is not plugged into a power source.

4.Loosen the screws that attach the hood to the base.With the supplied hex key, loosen the 2 screws on the front panel and the 2 screws on the side (1 on each side).To detach the hood from the base, stand at the side of the treadmill. Lift the hood up slightly and slide it toward the rear of the unit. Refer to Diagram 10.

Diagram 2 Attach the left upright support to the base.

Upright support (left side)

Column support

Base assembly

5.Remove 10 buttonhead screws (A) and washers (B) from the Hardware kit. Place the washers on the screws and split the screws into two sets of 5. Put the sets in easy reach of the column support mounts (5 screws per side).

6.Attach the left side upright support to the base assembly. Diagram 2. Locate the left upright support. This is the one you want to install first. Place the upright support into the base assembly and align all 5 mounting holes (3 on the side, 2 in the front). Insert 5 screws (A) and washers (B). Thread the screws into the unit, but leave them loose for final adjustments. Do not securely tighten the screws until after the display console and handrails have been installed.

Note: The left or right side of the treadmill can be determined when you stand near the rear roller and face the motor.

page 12

C O M M E R C I A L P R O D U C T S D I V I S I O N

Diagram 3 Route the cable through the upright support.

Route the cable through the hole and tape it to the side of the upright support.

7.Route the display cable. Diagram 3. Have an assistant hold the other support upright. See “Note:” below. Position the display console above the upright support and route the cable through it. Pull the cable through the hole in the upright support. Lay the display console and upright support on the floor.

Note: Tying one end of a string to the end of the cable and the other end to a washer may help in routing the cable. You can drop the washer through the upright support and pull the cable through. Refer to Diagram 3, #2.

Diagram 4 Attach the display console.

Upright support

Cable

Right side support

Display console (bottom side)

8.Secure the display console to the upright support. Attach the console to the right side support before placing the assembly onto the treadmill. To do this, take the following steps:

page 13

C O M M E R C I A L P R O D U C T S D I V I S I O N

a.Make sure that the cable is routed through the hole in the upright support.

b.Place a protective base (cardboard or plastic sheeting from the shipping container) on the floor. Position the display console (display-side down) onto it.

c.Remove 2 screws (A) and washers (B) from the hardware kit.

d.Align the upright support mounts with the display console’s. Insert 2 screws and washers. Tighten the screws securely with the hex key provided.

Diagram 5 Connect the cable and attach the right side support to the base.

Route cable through hole.

9.Attach the display console assembly to the base. Diagram 5. Take the following steps to install the display console assembly onto the treadmill.

a.Position the display console and right upright support over the column support mount located on the base.

Important: Do not crimp or pinch the cable! Crimped or pinched cables are not covered by the Precor limited warranty.

b.Carefully lower the upright support and align the mounting holes. See Diagram 5 #2. Check that the display console is seated properly on the left upright support. Insert 5 screws (A) with washers (B). Thread the screws into the unit, but leave them loose for final adjustments. Do not securely tighten the screws until after the display console and handrails have been installed.

c.Plug the connector into its receptacle on the lower board. A definite “click” is heard when the cable is properly attached. See Diagram 5 #3. If you do not hear and feel the connector “snap” into place, reinsert it.

page 14

C O M M E R C I A L P R O D U C T S D I V I S I O N

Diagram 6 Attach the console to the left upright support.

Buttonhead screws

10.Secure the display console to the left upright support. Diagram 6. Align the mounting holes on the console to those on the left upright support. Insert 2 screws (A) and washers (B). Do not securely tighten the screws until after the handrails have been attached.

Important: With the handrails attached, the width of the treadmill is 36.75” (93 cm). It will not fit through a standard 36” doorway.

11.Attach the handrails. Diagrams 7 and 8. For ease of assembly, place the side rails or rear feet on blocks. Obtain assistance to lift the treadmill. Do not place blocks beneath the running bed.

To attach the handrails, perform the following steps on one side at a time:

Diagram 7 Handrail alignment and installation.

1	2
	Console
	extension
	3

a.Alignment pins on the top of the handrails necessitate sliding the handrails into the console assembly at an approximate 45ο angle. Position the handrail as shown in Diagram 7 and slide it onto the console extension. When the alignment pins are fully engaged, carefully lower the handrail toward the base. Insert 2 screws (C) and finger-tighten.

page 15

+ 33 hidden pages