DC-DC Converters
TEN40WI Series, 40 Watt
Features
• Ultra wide 4:1 input range
• High efficiency up to 88%
• I/O isolation 1500VDC
• Operating temperature range -40°C to +75°C
• Short circuit protection
• Adjustable output voltages
• Remote On/Off
• High power density in a 50.8 x 50.8 x 10.2 mm Metal package
Electrical Specification
Output Voltage Adjustment ±10% by external resistor
Conducted EMI EN55022 class A & FCC level A (with external capacitor)
Short Circuit Protection continuous, automatic recovery
Operating Temperature Range -40°C to +75°C (with derating)
Thermal protection Shutdown at 115°C
I/O Isolation test voltage 1500VDC
Safety Approvals cUL/UL 60950-1, IEC/EN 60950-1
Casing metal, 6-side shielded with insulated baseplate
Remote On/Off Shutdown input for low input current (3mA) in standby operation
www.powersolve.co.uk
Output Voltage and Current Ratings
MODEL INPUT OUTPUT OUTPUT RIPPLE & LINE LOAD EFF.
TEN 40-2410WI 3.3VDC 10000mA 50mV pk-pk max. 0.2% 0.5% 86%
TEN 40-2411WI 5VDC 8000mA 50mV pk-pk max. 0.2% 0.5% 87%
TEN 40-2412WI 9 - 36V 12VDC 3330mA 75mV pk-pk max. 0.2% 0.5% 87%
TEN 40-2413WI 15VDC 2660mA 75mV pk-pk max. 0.2% 0.5% 87%
TEN 40-2422WI ±12VDC ±1660mA 150mV pk-pk max. 0.2% 1.0% 86%
TEN 40-2423WI ±15VDC ±1330mA 150mV pk-pk max. 0.2% 1.0% 86%
TEN 40-4810WI 3.3VDC 10000mA 50mV pk-pk max. 0.2% 0.5% 86%
TEN 40-4811WI 5VDC 8000mA 50mV pk-pk max. 0.2% 0.5% 88%
TEN 40-4812WI 18 - 75V 12VDC 3330mA 75mV pk-pk max. 0.2% 0.5% 87%
TEN 40-4813WI 15VDC 2660mA 75mV pk-pk max. 0.2% 0.5% 87%
TEN 40-4822WI ±12VDC ±1660mA 150mV pk-pk max. 0.2% 1.0% 86%
TEN 40-4823WI ±15VDC ±1330mA 150mV pk-pk max. 0.2% 1.0% 86%
VOLTAGE VOLTAGE CURRENT NOISE REG. REG.
Mechanical and Connection Details
Pin Single Output Dual Output
1 +Vin (Vcc) +Vin (Vcc)
2 -Vin (GND) -Vin (GND)
3 Remote On/Off Remote On/Off
4 -Sense +Vout
5 +Sense Common
6 +Vout Common
7 -Vout -Vout
8 Trim Trim
Powersolve Electronics Ltd. 8A Arnhem Road, Newbury, RG14 5RU. England
Tel: 01635 521858 Fax: 01635 523771 Email: sales@powersolve.co.uk
Loading...