Files for
Size:
2.3 Mb
Download

User Guide

SoundPoint® IP 300/301 SIP 1.5.x

SIP 300/301 IP®SoundPoint

GUIDE USER

March 24, 2005

Contents

Introduction ...............................................

1

Parts List ...................................................

1

Installing SoundPoint® IP 300/301 SIP..........

2

Connecting Network and Power Source................................

2

Connecting the Handset and Optional Headset ....................

3

Attaching the Base.................................................................

3

Features ....................................................

4

Key Descriptions .........................................

5

Using SoundPoint® IP 300/301 SIP ...............

6

Placing a Call ........................................................................

6

Answering a Call....................................................................

7

Call Hold and Resume...........................................................

7

Multiple Calls on Hold............................................................

7

Microphone Mute...................................................................

7

General Key Use ...................................................................

8

Local Conferencing................................................................

8

Splitting a Conference ...........................................................

8

Transferring a Call .................................................................

8

Call Timer...............................................................................

9

Ending a Call .........................................................................

9

Redial.....................................................................................

9

Call Forwarding......................................................................

9

Volume Adjustment................................................................

9

Do Not Disturb.....................................................................

10

Time and Date .....................................................................

10

Headset Memory Mode .......................................................

10

Display Contrast ..................................................................

11

Ring Type.............................................................................

11

Call Lists..............................................................................

11

Contact List..........................................................................

12

Speed Dial...........................................................................

13

Multiple Lines.......................................................................

13

Multiple Keys Per Line.........................................................

13

Multiple Call Appearances...................................................

14

Shared Lines........................................................................

14

Voice Mail ............................................................................

15

Distinctive Ringing / Call Treatment.....................................

15

Phone Reboot......................................................................

16

Optional Features .....................................

16

Text Messaging....................................................................

16

Presence / Status / Buddy Lists...........................................

17

Troubleshooting ........................................

19

Safety and Compliance...............................

21

Part 15 Rules.......................................................................

21

Class B Digital Device or Peripheral....................................

21

Modifications........................................................................

21

Installation Instructions........................................................

21

Plug Acts as Disconnect Device..........................................

21

Industry Canada (IC) ...........................................................

22

CE and VCCI Mark..............................................................

22

Polycom Limited Warranty

 

and Limitation Liability..............................

22

Exclusions ................................................

23

Warranty Exclusive....................................

23

Service Agreements...................................

23

Limitations of Liability...............................

23

Disclaimer................................................

24

Governing Law .........................................

24

Copyright Notice .......................................

24

Introduction

Thank you for choosing the SoundPoint® IP 300/301 SIP. This unit provides business telephony features and functions such as Multiple Call Appearances, Call Hold, Transfer, and Conference over

an IP network. In this User Guide you will find everything you need to quickly use your new phone. Be sure to verify with your system administrator that your

Parts List

network is prepared for configuring your SoundPoint® IP 300/301 SIP phone or consult the Administrator Guide SoundPoint®/SoundStation® IP SIP for more information. As well, be sure to read the Parts List and the Safety Notices section in this guide before you set up and use the SoundPoint® IP 300/301 SIP phone.

The following items are included in your SoundPoint® IP 300/301 SIP package. Check this list before installation to ensure

Polycom SoundPoint® IP 300/301 SIP

1

ABC

DEF

Menu

2

3

 

DoNotDisturb

GHI

JKL

MNO

 

4

5

6

Redial

PQRS

TUV

WXYZ

 

7

8

9

Hold

*

OPER

 

 

0

 

 

that you have received each item. If you are missing any items, please contact your system administrator.

Power Adapter

(specification varies according to country)

Handset & Handset Cord

Phone Base

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Quick Start Guide

Network / Power Cable

1

Installing SoundPoint® IP 300/301 SIP

This section provides basic installation instructions and information for obtaining the best performance with the SoundPoint® IP 300/301 SIP phone. If you require additional information or assistance with your new phone, please contact your system administrator.

The SoundPoint® IP 300/301 SIP User Guide includes regulatory compliance information that your system administrator should review and can also be found at: www.polycom.com

Connecting Network and Power Source

AC Power Option

Connect the supplied Network Cable between the LAN jack on the phone and the LAN port on the wall or hub/switch device port. Connect the DC plug of the AC wall adapter into the supplied LAN cable as shown.

In-Line Power Option

If the phone is connected to a compatible Ethernet switch that can provide in-line power, the phone will use that power option. Simply plug the supplied Network cable between the LAN jack on the phone and an available Power and Data port on the In-Line Power switch.

Cisco™Catalyst™ In-Line

Power Switch

IEEE 802.3af compliant

Cisco™ In-Line Power

Cable

In-Line Power switch

(Part No. 2200-11014-002 Rev A)

 

 

OR

 

IEEE 802.3af In-Line

 

Power Cable

 

(Part No. 2200-11077-002 Rev A)

2

Connecting the Handset and Optional Headset

1.Connect the short straight end of the phone cord to the handset

and the corresponding longer

(Optional)

straight end of the cord to the

 

handset jack on the back of the

 

phone.

 

2. Connect the headset (optional

 

accessory) to the headset jack on

 

the back of the phone.

 

For information on headsets, please visit www.polycom.com and choose the Support link.

Attaching the Base

1.Place all cords in the recessed area above the modular jacks as shown.

2.Align the two protrusions on the bracket with their corresponding holes in the phone and snap them together to lock the base to the phone.

3

Features

Soft Keys

The screen will display labels for these keys, to identify their context-sensi- tive functions.

Headset

Microphone Mute

Dial Pad

These 12 keys provide the 10 digits, alphabetic and special characters available in context sensitive applications.

Line/Speed Dial Keys

Use these keys to activate up to two lines or one line and a speed dial that can be assigned to your phone.

 

 

 

 

Display Control Keys

 

 

 

 

Use the arrow keys to scroll

 

 

 

 

through the displayed information.

1

ABC

DEF

Menu

 

2

3

DoNotDisturb

Feature Keys

GHI

JKL

MNO

4

5

6

Redial

Access important features using

PQRS

TUV

WXYZ

 

these keys.

7

8

9

Hold

 

*

OPER

 

 

 

0

 

 

 

Hold

Hookswitch

Speaker

For ringer and hands-free audio output.

1

ABC

DEF

2

3

GHI

JKL

MNO

4

5

6

PQRS

TUV

WXYZ

7

8

9

*

OPER

 

0

 

Volume Keys

Use these to adjust the volume of the handset, headset, speaker, and ringer.

Indicator

This will alert you to incoming calls, new messages, and other

events.

 

Character

Menu

Display

DoNotDisturb

Shows information

Redial

about calls, messages,

soft keys, time, date,

 

Hold

and other relevant

 

data.

4

Key Descriptions

Feature Key Description

Menu

DoNotDisturb

Redial

Hold

Dial Pad

Mutes audio transmission locally during calls.

Allows users to place and receive calls through an optionally connected headset.

Line or Speed Dial keys.

Scrolls through menu options.

Scrolls through menu options.

Access local and server features.

Cancels ringing and directs incoming calls to your Voice Mail (if supported).

Dials last connected party from the phone.

Places current active call in Hold state.

Soft keys to select from various context-sensitive options.

Volume keys to adjusts audio and ringer volume.

General dialing and alphanumeric entry (including special characters).

5

Using SoundPoint® IP 300/301 SIP

Placing a Call

Using the Handset:

1.To obtain dial tone, pick up the handset.

2.Dial the desired number, OR

Dial by SIP URL or IPaddress:

After obtaining dial tone press Name

Enter URL or IP (press * for “.” and # for “@”)

Press Send to complete the call.

Using Listen Mode:

1. With the handset on-hook, press Menu , and choose Features, fol-

lowed by Listen Mode.

2.Dial the desired number, OR

Dial by SIP URL or IPaddress as above.

Using the Headset:

1. With the optional headset connected, press a line key, , or NewCall to obtain dial tone.

2.Dial the desired number, OR

Dial by SIP URL or IPaddress as above.

During a call, users can alternate between handset or headset modes by pressing the key, or picking up the handset.

Listen Mode can be used for listening to a conference call but not actively participating, or for checking voice mail.

See also Headset Memory Mode.

Users also have the option to dial directly from the dial pad without first getting dial tone. Simply enter the number then lift the handset or press the Dial soft key or press thekey.

In all cases, the active call will appear on the display showing call duration and destination.

Examples: 10.3.0.42

To obtain the IP address of your phone, press

joe@205.173.1.24

Menu followed by Status, Platform and

sip: jane@polycom.com

Phone. The IP address is listed together with

 

other network information.

 

 

6

Answering a Call

Using the Handset:

Pick up the handset.

Using Listen Mode:

Press the Answer soft key or the line key ().

Using the Headset:

Pressing will answer the call through an optionally connected headset. If headset memory mode is enabled, pressing the line key () will do the same.

In all cases, the active call will appear on the display showing call duration and destination.

Call Hold and Resume

During a call, press Hold or the Hold soft key. The call will be placed on hold and this will be indicated on the display. Press the Resume soft key to retrieve the call.

Incoming calls may be ignored by pressing the Reject soft key or DoNotDisturb during ringing.

If there is an active call when a new incoming call is received, pressing the Answer soft key places the active call on hold to answer the new call.

Pressing Answer will also answer the call in the previously connected mode.

Multiple Calls on Hold

If multiple calls are on hold on a single line key, use the arrow keys to switch between the calls then press the Resume soft key to retrieve the desired call. If more than two calls are on hold on a single key, an indication will appear on the display, for example “2/3” shows that this is the second call out of three calls.

Microphone Mute

During a call, press . The LED on the phone lights up and a flashing microphone on the display indicates that the other party (parties) cannot hear you.

If calls are on hold on more than one line key, the details of the calls on any line key can be viewed by pressing that line key and holding it down for a few seconds. If a line key is pressed briefly, the first call on hold on that line key will be retrieved.

Microphone Mute applies to handset and headset modes. You can still hear all other parties while Mute is enabled.

To turn off Microphone Mute, press again.

7

General Key Use

To navigate through menus and to enter data, these are useful tips:

1.Use and or the

Next and Prev soft keys to scroll through lists. In some lists the and keys can be used as “Page Up” and “Page Down”.

2.Many soft keys can only be accessed by pressing the More soft key.

3. The Menu key can be pressed to quickly exit from any menu.

4.To enter text using the dial pad, press the number keys one or more times. For example, for ‘A’ press ‘2’ and for ‘C’ press ‘222’. When in text entry mode the display title will show whether keys will generate numbers (1), upper-case (A) or lower-case (a) characters and the 1/A/a soft key can change this.

Local Conferencing

 

 

 

 

Ending the call on the conference

 

A conference may be created with two other par-

 

 

 

originator’s phone will end the

 

ties using the phone’s local conferencing feature.

 

conference.

 

 

 

 

 

 

1.

Place a call to the first party.

4. When the second party answers,

2.

Press the Conf soft key to obtain a

press the Conf soft key again to join

 

new line (the active call is placed

all parties in the conference, or

3.

on hold).

press the Split soft key to put the first

Dial the number of the second party

call on hold and keep the second

 

or use the arrow keys to access

call as the active call.

speed dial numbers or the missed

A conference may be created at any time

call list, or use the Features menu to

between an active call and a call which is

access placed and received call lists.

on hold (on the same line) by pressing the

From one of these lists press the Dial

Join soft key.

soft key.

 

 

 

Splitting a Conference

 

When a conference has been established, a Split soft key is available. Pressing this

key will split the conference into two calls on hold.

Transferring a Call

1.During a call, press the Trnsfr soft key (the active call is placed on hold).

2.Press the Blind soft key if a blind transfer (without consultation) is required.

3.Dial the number to which you want to transfer the call or use the arrow keys to access speed dial numbers or the missed call list, or use the Features menu to access placed and received call lists. From one

of these lists press the Dial soft key. (This step completes a blind transfer.)

4.Press the Trnsfr soft key again after consulting with the new party to complete a consultative transfer or press the Split soft key to put the first call on hold and keep the

second call as the active call. Transfer may be cancelled during establishment by pressing the Cancel soft key.

The original call is resumed.

8

Call Timer

Call progress on an active call is monitored through a local call timer. This is visible within the active call window on the display.

Ending a Call

Press the EndCall soft key. OR

Replace the handset, or press if in Headset Mode.

Redial

Press Redial to dial the last call placed from your phone.

To redial another previously dialed number, press the Menu soft key, and select

Features, Call Lists, then Placed Calls.

You will see a list of previously placed calls. Choose the number you wish to redial and press Dial.

Call Forwarding

Calls may be Forwarded (Diverted) to another extension as follows:

1.Press the Fwd soft key from the phone’s idle display.

2.(Optional) If multiple lines are in use, select which line to forward.

3.Enter a number or URL to forward all future calls to.

4.Press the Enable soft key to confirm Call Forwarding.

Idle display returns with a moving arrow on the line label to confirm Call Forwarding enabled.

To turn call forwarding off:

1.Press the Fwd soft key from the phone’s idle display.

2.(Optional) If multiple lines are in use, Select which line to disable Call Forward.

3.Press the Disable soft key.

Idle display returns and the line indicator now displays the regular icon.

Volume Adjustment

Press the volume keys to adjust receiver volume during a call. Pressing these keys in idle state adjusts the ringer volume.

To conform to regulatory requirments, handset and headset volume will return to a preset level after each call. Hands-free volume settings will be maintained across calls.

9

DoNotDisturb

Do Not Disturb

Press to prevent the phone from ringing on incoming calls. A flashing icon and text on the display indicates that Do Not Disturb is on.

Calls received while Do Not Disturb is enabled are logged in the Missed Call list.

To turn off Do Not Disturb, press DoNotDisturb again.

(Optional) If multiple lines are in use, Do Not Disturb can be set on a line-by-line basis. Contact your system administrator for further details. When Do Not Disturb is enabled for a particular line, this is indicated by a flashing “ X ” beside the line indicator on the display.

Time and Date

Time and Date is clearly displayed on the

1.

Press Menu .

SoundPoint® IP 300/301 SIP phone. If the

2.

Select Settings followed by Basic,

phone cannot obtain a time and date from

 

Preferences, Time & Date;

the server, the display will flash. Contact

3.

Select from Date Format, Time For-

your system administrator if either time or

 

mat, Clock Order or Enable/Disable.

date is incorrect. Users have control over

4.

Scroll through the options via the up

the format of the display and can turn it off.

 

and down arrow keys.

Select options which are right for you as

5.

Press Select to confirm and Menu

follows:

 

to return directly to the idle display.

Headset Memory Mode

As an option, the headset can be permanently enabled. This is especially useful for regular headset users.

To do this:

 

1. Press

Menu .

2.Select Settings followed by Basic, Preferences, Headset Memory.

3.Use the up or down arrows and Select soft key to enable Headset Memory

Mode.

4. Press Menu to return directly to the main menu.

Subsequent calls to or from this phone using the headset will activate a flashing headset icon on the display. Pressing the line keys or Answer soft key to receive a call will now connect to the user’s headset automatically.

Repeat steps 1-3 and select Disable to turn Headset Memory Mode off.

10

Display Contrast

To adjust the contrast on the display to a comfortable level:

1. Press Menu . Select Settings followed by Basic, Contrast.

2.Press the Up or Down soft keys (or volume keys) to increase or decrease the display contrast.

Ring Type

Many ring types are available. Users can select different rings to distinguish between lines or to have a different ring from their neighbor’s phone.

To change the incoming ring:

1. Press Menu . Select Settings fol-

lowed by Basic, Ring Type.

2.(Optional) If multiple lines are used, first select which line to change.

Call Lists

A local list of calls missed, received, and placed is maintained by the phone (up to 100 for each).

Press Menu . Select Features followed by Call Lists. Select Missed, Received, or

Placed Calls as desired. Call information will be displayed.

3.Press the Ok or Cancel soft keys to accept or cancel changes.

4. Press Menu or the Exit soft key to return to the idle display.

3.Using the arrow keys, highlight the desired ring type. Press the Play soft key to hear the selected ring type.

4.Press Select to change to the selected ring type.

5. Press Menu or the Exit soft key to return to the idle display.

See also Distinctive Ringing / Call Treatment.

Choose:

1.Edit to amend the dial string if necessary.

2.Dial to return the call.

3.Exit to return to the previous menu.

4.Info to view information about the call.

5.Save to store the contact to the Contact Directory.

6.Clear to delete the call from the list.

Press the Exit soft key to return to the idle display.

To quickly view the Missed Calls list from the idle display press.

11

Contact List

In addition to a directory of missed, placed, or received calls, the phone can store a local directory of 200 or more contacts*. Users can add, delete, edit, dial, or search for any contact in this list through just a few key strokes.

To add or edit a contact:

1. Press Menu , select Features and Contact List.

2.Press Add to enter another contact into the phone’s database or press Edit to edit an existing entry.

3.To move between fields when editing, use the Next or Prev soft keys. Enter first and/or last name from the keypad. Press the 1/A/a soft key to select between numeric and upper/lower case alphanumeric modes.

Contacts can be easily added from Call Lists. See Call Lists for more

information.

4.Enter the Contact number. This is a required field and it must be unique (not already in the directory).

5.Speed Dial Index, Ring Type and Divert Contact may be left blank.

6. Use and or the Change soft key to switch between Enabled and Disabled settings for the last four fields.

7.Press Save to confirm or Cancel to abandon the changes, then press Exit to return to the idle display.

To search for a particular contact:

1.Press Search from the Contact List menu.

2.Using the dial pad, enter the first few characters for First or Last names.

3.Press Search to search for contacts.

4.Successful matches can be dialed from the resulting screen.

*Limit depends on Server configuration. Contact your system administrator for full details.

12

Speed Dial

Pre-assigned numbers can be associated with speed dial entries for rapid automated dialing. If a line key is unassigned to a line, it can act as a speed dial key for the first speed dial entry. Other speed dial entries can be viewed from the idle display by pressing .

To assign John to a Speed Dial entry:

1. Press Menu , select Features and

Contact List.

2.Press the Add soft key to enter John’s contact details (see Contact Directory) or highlight John’s existing directory entry and press Edit.

3.Enter Speed Dial Index as “1”. This assigns John to the first speed dial entry.

To remove a Speed Dial entry:

1. Press Menu , select Features and

Contact List.

2.Scroll to the desired entry and press

Edit.

3.Delete the Speed Dial Index number

using the and then the Delete soft keys.

Multiple Lines

4.Press Save to confirm or Cancel to abandon the change then press Exit to return to the idle display.

Idle screen is now as shown if the second line is available:

4.Press Save and Exit to return to the idle display.

The Speed Dial for that contact is removed.

SoundPoint® IP 300/301 SIP can support up to two lines, each associated with its own line key. Lines can be configured for private or shared lines.

Typically, the top-most line key is reserved for the principle directory number (DN) of the phone. Depending on how your phone is configured, the display could resemble one of the screens shown:

Multiple Keys Per Line

A line on the phone can be configured to have two line keys associated with it. If this is the case, the display could look something like this:

Incoming calls to this line will be distributed evenly among the two available keys. Similarly, outgoing calls will be distributed.

13

Multiple Call Appearances

Each line on the phone can be configured to have one or more call appearances. More than one call appearance is useful if there is an active call and an incoming call arrives on the same line. In the example shown, there is in an outbound call with Bob Smith. The second diagram shows an incoming call from Jim Green. To answer this incoming call, put the original call on Hold or press the key to access the new call. Soft key labels will be updated on the display with these options:

1.Answer this incoming call, the first call is automatically placed on Hold.

2.Reject the second incoming call.

3.Forwrd the incoming call to another extension.

Answering the incoming call places the original on Hold and refreshes the soft key labels as indicated (last illustration).

A user can also place another outbound call on the same first line. Press Hold during the first call and press NewCall to obtain dial tone for a second call.

Shared Lines

The phone supports shared lines*. If two phones share a line, an incoming call to that number will cause both phones to ring. The call can be answered on either phone but not both.

The shared line icon changes to a moving icon when the line is in use remotely.

Calls on shared lines can be transferred, put on hold, or added to a conference.

*Shared lines are an optional feature configured on the server and may not be supported on your particular system. Contact your system administrator to find out.

14

Voice Mail

Received messages will be indicated by a flashing Message Waiting Indicator LED on the front of the phone and optionally a visual notification on the display.

Individual line indicators reflect voice messages left on that line (useful if multiple lines are in use).

To listen to voice messages:

1. Press Menu and select Features, Messages*,†.

2.(Optional) If multiple lines are in use, select from which line messages are to be retrieved.

3.Display indicates number of messages and their importance. Press

A stutter dial tone in place of normal dial tone is used to indicate that one or more voice messages are waiting at the message center.

Connect to initiate retrieval from the Message Center,

OR

Press Clear to turn off the flashing LED without listening to messages.

4.Follow voice prompts to listen to messages.

*Voice Mail is an optional feature configured on the server and may not be supported on your particular system. Contact your system administrator to find out.

Screen options may vary with server-based application. Voice Mail can be accessed with a single key press. Contact your system administrator to configure this option.

Distinctive Ringing / Call Treatment

Users can set distinctive incoming ringing tones for contacts in their local directory. This allows identification of a contact by a specific ring tone.

To set a distinctive ring for a local contact:

1. Press Menu , select Features, Contact List.

2.Using the arrow keys, scroll through the directory to choose a contact.

3.Press Edit and scroll down using the Next soft key to Ring Type.

4.Enter a number corresponding

to one of the ring types available (pressthen the Delete soft

key to remove an existing value).

5.Press the Save soft key or Cancel to abandon the change.

Incoming calls from this contact will now have the distinctive ringing pattern applied.

See Ring Type in this guide for further details.

This feature is local to the phone, and may be over-ridden by server settings. Contact your system administrator for more details.

15

Phone Reboot

Periodically, the phone may require a user reboot. Reasons for this include accepting a new configuration or new software.

There are two ways to reboot the phone:

Simultaneously press and hold the Do Not Disturb, Hold, and Volume keys

(highlighted in the diagram) for more than 3 seconds

► Press Menu and select Settings, Advanced, Restart Phone (the user password is required to access this menu).

The reboot process will begin and is complete when the idle display is shown.

1

ABC

DEF

Menu

2

3

 

DoNotDisturb

GHI

JKL

MNO

 

4

5

6

Redial

PQRS

TUV

WXYZ

 

7

8

9

Hold

*

OPER

 

 

0

 

 

In the case of problems, it may be possible to restore normal operation of your phone without rebooting. Contact your system administrator before attempting to reboot the phone.

Optional Features

Text Messaging

Users can send and receive Text messages on the phone. SIP Instant (Text) Messaging is supported in real-time. Users can send and receive text messages using their phones. Received messages will be

To read text messages:

1. Press Menu and select Features, Messages, Instant Messages,

OR

Press the InstMsg soft key to read a message just received.

2.(Optional) If multiple lines are in use, select from which line messages are to be retrieved.

indicated by a flashing Message Waiting Indicator LED on the front of the phone and optionally a visual notification on the display.

3.Messages appear first to last in sent order.

4.Press the Next or Prev soft keys to cycle through messages in order.

16

To send a text message:

1. Press Menu and select Features, Messages, Instant Messages.

2.(Optional) If multiple lines are in use, first select from which line to send the message.

3.Press the New soft key.

4.Enter the desired extension or SIP URL. Press the 1/A/a soft key to alternate between numeric and upper/lower case alphanumeric modes.

5.Press the Select soft key to choose from various pre-scripted short messages.

OR

Press Edit to compose a custom message. Use dial pad keys to cycle through the character set. Use keys 1, *, 0, and # to select special characters.

6.Press Send when finished.

Presence / Status / Buddy Lists

The phone combines interactive message services and status monitoring to complement a traditional messaging application such as email.

Live interaction within a pool of phones is possible by monitoring the “presence” of the parties involved.

Each phone can “watch” the status of up to eight other phones. These other phones form the “Buddy List”. The status of buddies is displayed and updated in real time. Each phone can also be “watched” by up to eight other phones.

To add or delete a contact from your buddy list, or block a contact:

1. Press

Menu , select Features, Con-

tact List.

 

2.Using the arrow keys, scroll through the directory to choose a contact.

3.Press Edit and scroll down using the Next soft key to the Watch Buddy or Block Buddy fields.

4.Use the arrow keys or the Change soft key to switch between Enabled or Disabled status.

5.Press the Save soft key or Cancel to abandon the change.

To view and change Presence settings:

1. Press

Menu

and select Fea-

tures, Presence.

 

2.Choose My Status to change your own status (online, busy, etc.). This affects information sent

to watching phones. Presence information will also be sent to watching phones when the user goes off-hook or invokes Do Not

The diagrams show a typical Buddy Status screen display of monitored phones and a My Status display.

Disturb. The My Status display can also be accessed by pressing the MyStat soft key from the idle display.

3.Choose Buddy Status to monitor the status of the contacts within your buddy list. This can also be accessed by pressing the Buddies soft key on the idle display.

17

4.Choose Watcher List to see which phones are currently monitoring your status. Press the Block soft key to block a watcher.

5.Choose Blocked List to see which phones you have blocked from monitoring your status. Press the Unblock soft key to unblock a contact.

The software running on the phone is compatible with Windows™ and MSN Messenger™ for peer-to-peer presence and instant messaging.

18

Troubleshooting

No Dial-Tone

Verify power is correctly applied to the SoundPoint® IP 300/301 SIP phone:

Check that the display is illuminated.

Make sure the LAN cable is inserted properly at the rear of the phone (try unplugging and re-inserting the cable).

If using in-line powering, check that the switch is supplying power to the phone (contact your system administrator).

Verify if dial tone is present on any other audio paths:

Switch between handset, headset (if present) or hands-free to see if dial tone is present on these other paths.

If dial tone exists on one of these, connect a different handset or headset to isolate the problem.

No Display, Incorrect Display or Bad Contrast

Verify power is correctly applied to the SoundPoint® IP 300/301 SIP phone:

As “No Dial-Tone” above. Verify contrast adjustment:

Follow the instructions in this User Guide to adjust the contrast to a darker level.

Reboot the phone to obtain a default level of contrast (follow the instructions in this User Guide).

No Ringing

Verify incoming ring setting and volume level:

Adjust the ringing level from the front panel using the volume up/ down keys.

Check that the Ring Type selected in the Settings menu is not the Silent Ring.

Verify successful outbound or inbound calling:

Place a call to the phone under investigation. Check that the display indicates incoming call information.

Lift the handset. Ensure dial tone is present and place a call to another extension or number. Check that the display changes in response.

Verify successful outbound or inbound calling:

• As “No Display” above.

19

No Audio on Headset

Verify correct connections:

Ensure the headset is plugged into the jack marked Headset at the rear of the phone.

Ensure the headset amplifier (if present) is turned on and/or the volume is correctly adjusted.

No Response from Feature Key Presses

Verify phone is in active state:

Make a call to the phone to check for inbound call display and ringing as normal. If successful, try to press feature keys within the call to access Directory or Buddy Status for example.

• Press Menu followed by System Status and Server Status to confirm line is actively registered to the server.

Reboot the phone to attempt reregistration to the server.

Display shows “Network Link is Down”

 

Verify LAN cable is properly connected:

 

 

• Check termination at the switch or

Press Menu followed by System

hub (furthest end of the cable from

 

Status and Network Status. Scroll

the phone).

 

down to verify LAN port is Active.

• Check that the switch or hub is

Reboot the phone to attempt re-

operational (flashing link/status

 

registration with the server.

lights) or contact your system

 

 

administrator.

 

 

20

Safety and Compliance

Part 15 Rules

This device is compliant with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.This device may not cause harmful interference, and

2.This device must accept any interferences received, including interference that may cause undesired operation.

Class B Digital Device or Peripheral

Note: This equipment is tested and complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1.Reorient or relocate the receiving antenna.

2.Increase the separation between the equipment and receiver.

3.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4.Consult the dealer or an experience radio/TV technician for help.

Modifications

In accordance with Part 15 of the FCC Rules, the user is cautioned that any changes or modifications not expressly approved

by Polycom, Inc. could void the user’s authority to operate the equipment.

Installation Instructions

Installation must be performed in accordance with all relevant national wiring rules.

L’Installation doit être exécutée conformément à tous les règlements nationaux applicable au filage électrique.

Plugs Acts as Disconnect Device

The socket outlet to which this apparatus is connected must be installed near the equipment and must always be readily accessible.

La prise électrique à laquelle l’appareil est branché doit être installée près de l’équipement et doit toujours être facilement accessible.

21

Industry Canada (IC)

This Class [B] digital apparatus complies with Canadian ICES-003.

CE and VCCI Mark

This SoundPoint® IP 300/301 SIP is marked with the CE mark. This mark indicates compliance with EEC directories 89/336/ EEC and 73/23/EEC.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

A full copy of the Declaration of Conformity can be obtained from Polycom Ltd., 270 Bath Road, Slough, Berkshire, SL1 4DX, UK.

Polycom Limited Warranty

and Limitation Liability

LIMITED WARRANTY. Polycom warrants to the end user (“Customer”) that this product is expected to be free from defects in workmanship and materials, under normal use and service, for one year from the date of purchase from Polycom or its authorized reseller.

Polycom’s sole obligation under this express warranty is at Polycom’s option and expense, to repair the defective product or part, deliver to Customer an equivalent product or part to replace the defective item, or if neither of the two foregoing options are reasonably available, Polycom may, on its sole discretion, refund to Customer the purchase price paid for

the defective product. All products that are replaced will become the property of Polycom. Replacement products or parts may be new or reconditioned.

Polycom is expected to warrant any replaced or repaired product or part for ninety (90) days from shipment, or the remainder of the initial warranty period, whichever is longer.

Products returned to Polycom must be sent prepaid and packaged appropriately for safe shipment, and it is recommended that they be insured or sent by a method that provides for tracking of the package. Responsibility for loss or damage does not transfer to Polycom until the returned item is received by Polycom. The repaired or replaced item will be shipped to Customer, at Polycom’s expense, not later than thirty (30) days after Polycom receives the defective product, and Polycom will retain risk of loss or damage until the item is delivered to Customer.

22

Exclusions

Polycom will not be liable under this limited warranty if its testing and examination disclose that the alleged defect or malfunction in the product does not exist or results from:

Failure to follow Polycom’s installation, operation, or maintenance instructions.

Unauthorized product modification or alteration.

Unauthorized use of common carrier communication services accessed through the product.

Abuse, misuse, negligent acts or omissions of Customer and persons under Customer’s control; or

Acts of third parties, acts of God, accident, fire, lightening, power surges or outages, or other hazards.

Warranty Exclusive

IF A POLYCOM PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY FOR BREACH OF THAT WARRANTY SHALL BE REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT POLYCOM’S OPTION. TO THE FULL EXTENT ALLOWED BY LAW, THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, TERMS, OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE,

INCLUDING WARRANTIES, TERMS, OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, CORRESPONDENCE WITH DESCRIPTION, AND NON-INFRINGE- MENT, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. POLYCOM NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS.

Service Agreements

Please contact your Polycom Authorized Reseller for information about service

agreements applicable to your product.

Limitations of Liability

LIMITATION OF LIABILITY. TO THE FULL EXTENT ALLOWED BY LAW, POLYCOM EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND,

OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF POLYCOM

23

OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT POLY-

COM’S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.

Disclaimer

Some countries, states, or provinces do not allow the exclusion or limitation of implied warranties or the limitation of incidental or consequential damages for certain products supplied to consumers, or the limitation of liability for personal injury, so the above limitations and exclu-

Governing Law

This Limited Warranty and Limitation of Liability shall be governed by the laws of the State of California, U.S.A., and by the laws of the United States, excluding their conflicts of laws principles. The United Nations Convention on Contracts for the International Sale of Goods is hereby excluded in its entirety from application to this Limited Warranty and Limitation of Liability.

All rights reserved under International and Pan-American Copyright Conventions. No part of the contents of this manual may

sions may be limited in their application to you. When the implied warranties are not allowed to be excluded in their entirety, they will be limited to the duration of the applicable written warranty. This warranty gives you specific legal rights which may vary depending on local law.

be copied, reproduced, or transmitted in any form or by any means, or translated into another language or format, in whole or part, without written consent from Polycom, Inc.

Do not remove (or allow anybody else to remove) any product identification, copyright or other notices.

Polycom, the Polycom logo design, and SoundPoint are trademarks of Polycom, Inc. in the U.S. and various other countries.

Copyright Notice

Portions of the software contained in this product are Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd. and Clark Cooper.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software,

and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABIL-

24

ITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN

AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

25

Polycom, Inc.

1565 Barber Lane

Milpitas, CA 95035

©2004 Polycom, Inc. All Rights Reserved. Polycom®, SoundPoint®, and the Polycom logo design are registered trademarks of Polycom, Inc. in the U.S. and various countries. All other trademarks are the property of their respective compainies.

1725-11319-001 Rev. B