Plantronics Explorer® 240 & 395
User Guide
ii
Welcome
Thank you for purchasing the Plantronics Explorer 240 or 395 headset.
This guide contains instructions for setting up and using your new headset.
Before using this product, please refer to the For Your Safety booklet
for important safety, charging, battery and regulatory information.
Getting Assistance
The Plantronics Technical Assistance Center is ready to assist you.
You can find answers to frequently asked questions, ask a question
using e-mail, receive service over the Internet, or speak directly
with a representative. Visit www.plantronics.com/support or call your
country support line mentioned at the back of this user guide.
NOTE If you are considering returning this headset, please contact
the Technical Assistance Center first.
Registering Your Product
Visit www.plantronics.com/productregistration to register your product
online so we can provide you with the best service and technical support.
NOTE For pairing your headset, your PIN code/Passkey is 0000.
iii
Contents
Package Contents and Features ...........................................................iv
Charging Your Headset ......................................................................... 1
Using the AC charger ..................................................................1
What is Bluetooth®? .............................................................................2
Plantronics QuickPair
Range (the distance between headset and phone) ...................... 2
Pairing Your Headset ............................................................................ 3
Adjusting the Fit .................................................................................... 4
Headset Controls and Indicators ........................................................... 6
Troubleshooting .................................................................................... 9
Product Specifications ........................................................................ 10
®
Technology ..............................................2
iv
Package Contents and Features
NOTE Your headset may look different than the illustration, but will still
work as described.
Headset Front*
Volume Control Button
Call Control Button
Status Light
Power On/Off Switch
Swivel Earloop [fits either ear]
Headset Back
Microphone
Speaker/Eartip
Micro USB Charging Jack
Power On/Off Switch
AC Charger 100 – 240V
* For illustration purposes only; designs will vary by model number.
1
Charging Your Headset
2
1
Your new headset performs best when it is fully charged. While your
headset is charging, the indicator light glows red. When your headset
is fully charged, the indicator light turns blue. Do not use your headset
while it is connected to the charger.
How to Charge Your Headset Using the AC Charger
1 Plug the charger into a power outlet.
2 Connect the charger cable to the headset.
1
CHARGING TIME
2
2 hours ....................... Full charge
1 hour ......................... Minimum charge
before first use
NOTE Never charge the battery where the temperature may fall below
0°C (32°F) or rise above 40°C (104°F) – for example, in an unattended
motor vehicle. Do not charge the battery while it is unattended.
2
What Is Bluetooth?
Bluetooth wireless technology provides a way for devices, like headsets
and phones, to communicate with each other without wires. Pairing is
the set-up process of introducing your headset to your phone.
Before using your headset for the first time, you must pair it with
your Bluetooth-enabled phone.
™
Plantronics QuickPair
To simplify the Bluetooth setup process, your new headset uses
Plantronics QuickPair technology. This process is shown on the next page.
• The first time you turn your headset on, your headset
automatically enters pairing mode for 10 minutes (the indicator
light flashes red and blue).
Until you successfully pair your headset with a Bluetooth-
•
enabled phone, every time you turn it on it will enter pairing mode.
• To later pair to a new phone, turn on the headset, then press
and hold the Call Control button until red then blue flashing
appears, which indicates pairing mode status.
Range (the distance between headset and phone)
• To maintain the connection, keep your headset within 10 meters
(33 feet) of your phone.
• For the least amount of interference place the headset and
phone on the same side of your body.
If you move too far from your phone and lose the Bluetooth connection:
•
the headset may reconnect automatically within 60 seconds when
you move closer to your phone (you will hear a low tone), OR
• you may have to tap the Call Control button to reconnect (you
will hear a low tone), OR
• if neither of the above options work, you may have to
reconnect to your headset using your phone’s Bluetooth menu.
Technology
3
Pairing Your Headset
SETTINGS
SETTINGS
Time and Da te
Phone Settings
Bluetooth
Sound Settings
Network S erv ices
Security
Reset Settings
BLUETOOTH
BLUETOOTH
Dis cove r/
Search
BLUETOOTH
BLUETOOTH
2XXPlantronics
PASSKEY
0000
1
32
How to Pair Your Phone With Your Headset for the First Time
1 Turn on the Bluetooth feature on your phone.
For most phones, select Settings/Tools > Connections >
Bluetooth > On. See your phone’s user guide for more information.
2 Turn the headset on.
Turn on your headset by sliding the Power On/Off Switch toward the
microphone. Wait until the indicator light flashes red then blue.
If you don’t see the red then blue flashes, turn the headset off, then
turn it on again. Press and hold the Call Control button until you see
the red then blue flashes that indicate pairing mode status.
3 Set your Bluetooth phone to ‘discover’ to locate the headset.
This usually involves going to ‘setup’, ‘connect’ or ‘Bluetooth’ menu
on your phone and selecting the option to ‘discover’ or ‘add a
device’.
4 Once available headsets are listed, select your headset (for
example 2XXPlantronics or 3XXPlantronics). If prompted for a
passkey, enter 0000.
When pairing is successful, the indicator on your headset flashes
blue. Your phone will also confirm when pairing is complete.
4
4
Adjusting the Fit
1
2
The headset comes out of the box with the earloop in place to wear on
your right ear.
1 Place the earloop behind your ear.
Rotate the headset so that the speaker rests comfortably in your ear.
2 Align the microphone with the corner of your mouth.
Callers can hear you best when you point the microphone towards
the corner of your mouth.
5
Adjusting the Fit
1
2
It’s easy to move the earloop to fit on your left ear.
1 Lift the earloop.
2 Swivel the earloop to the right and push it back down.
Right Left
On: Four rising tones
Off: Four descending
On: Short blue flash
Off: Long red flash,
to the “On” position.
Action Indicator Light Tone
On: Slide the Power Switch
tones
then turns off
to the “Off” position.
Off: Slide the Power Switch
Tap the Call Control button. None Brief low tone at the
beginning or end of
the call.
None Low tone
Press and hold the Call
Control button until you
hear a low tone.
None
Two simultaneous red/
blue flashes, a pause, then
two more red/blue flashes
(repeating for 5 minutes or
until cancelled).
Briefly press any button to
cancel the indicator light.
6
Turn the headset
Headset Controls and Indicators
on or off
Answer/end
a call
Reject an
incoming call
Missed call
indicator
Ringing
None when
checking level.
Low battery tone
indication: 3 tones
Blue flash every 2 seconds until
the call is ended.
Red flashes Battery level
1 More than 2/3 full
2 1/3 - 2/3 full
Action Indicator Light Tone
phone and press send.
press and hold both the
Call Control and Volume
buttons for about 2
seconds. The indicator
when under 5
minutes talk time
is remaining.
Low tone at every
3 Less than 1/3 full
Single blue flash for every
light flashes to show the
charge level.
Tap the Volume button to
volume level
change. (Two
tones at maximum
volume level.)
volume level change.
increase through 4 levels;
tap at top level to return to
lowest volume setting.
7
Headset Controls and Indicators
Make a call Enter the number on your
Battery level To check, simultaneously
Adjust the volume
(during call)
WARNING Do not use headphones/headsets at high volumes for an extended period of time. Doing so
can cause hearing loss. Always listen at moderate levels. See www.plantronics.com/healthandsafety for
more information on headsets and hearing.
phone may prompt
with “Name please” or
tones.
moving to phone; short
low tone when moving
to headset.
8
None Single low tone;
Action Indicator Light Tone
Control button until you
Headset Controls and Indicators
Voice Dial Press and hold the Call
None Two brief low tones
hear a tone.
Redial last number Tap the Call Control
button twice.
None Long low tone when
While the call is in progress,
press and hold the Call
Control button until you
hear a tone.
Transfer a call from
headset to phone,
or from phone to
headset
9
Troubleshooting
My headset
does not work
with my phone
Callers cannot hear
me, or I cannot
hear callers/dialing
tone
My headset is
flashing red then
blue
Your headset may not have been in pairing mode
when your phone was searching for it. Repeat the
pairing process on page 3.
You may have made incorrect menu selections
on your phone while pairing. Repeat the pairing
process on page 3.
Make sure the headset Power Switch is in the
ON position.
Your headset may be out of Bluetooth range
or experiencing interference. Move the headset
closer to your phone, and make sure your
headset and phone are on the same side of your
body. See Range on page 2.
Your headset battery is drained. Recharge the
battery using the supplied AC power adapter.
The listening volume is too low. Tap the Volume
button to increase the headset volume.
Your headset is in Pairing mode. If you are not
trying to pair the headset, reset it by simply
turning headset off then on again. Otherwise,
see Pairing on page 3.
10
Product Specifications
Talk Time* Up to 5 hours
Standby Time* Up to 7 days
Charge Time 2 hours
Range Up to 10 meters (33 feet)
Power Requirements 5V DC – 180 mA
Battery Type Rechargeable, non-replaceable,
Storage/Usage/
Charging Temperature
Bluetooth version 2.1 + EDR (Enhanced Data Rate)
* Battery enabled. Performance may vary by device.
lithium ion polymer
0º C - 40º C (32º F - 104º F)
Supports your phone’s Bluetooth Hands-free
(HFP), Headset (HSP) and Secure Simple
Pairing (SSP) profiles.
11
For safety information, see the separate “For Your Safety” booklet.
For warranty information, see the separate “2 Year Warranty” leaflet
or visit www.plantronics.com
en
Plantronics Ltd
Wootton Bassett, UK
Tel: 0800 410014
ar
www.plantronics.com
cs
Czech Republic
www.plantronics.com
da
Danmark
Tel: 80 88 46 10
de
Plantronics GmbH
Hürth, Deutschland
Kundenservice:
Deutschland 0800 9323 400
Österreich 0800 242 500
Schweiz 0800 932 340
el
www.plantronics.com
Για περισσότερες
πληροφορίες:
es
Plantronics Iberia, S.L.
Madrid, España
Tel: 902 41 51 91
fi
Finland
Tel: 0800 117095
fr
Plantronics Sarl
Noisy-le-Grand
France
ga
Plantronics BV
Regus House
Harcourt Centre
Harcourt Road
Dublin 2
Ireland
Service ROI: 1800 551 896
he
:רתאב רקב ,ףסונ עדימל
www.plantronics.com
hu
További információk:
www.plantronics.com
it
Plantronics Acoustics
Italia Srl
Milano, Italia
Numero Verde: 800 950934
nl
Plantronics B.V.
Hoofddorp, Nederland
Tel: (0)0800 Plantronics
0800 7526876 (NL)
00800 75268766 (BE/LUX)
no
Norge
Tel: 80011336
pl
Aby uzyskać więcej
informacji:
www.plantronics.com
pt
Portugal
Tel: 0800 84 45 17
ro
Pentru informaţii
www.plantronics.com
ru
Дополнительная
информация:
www.plantronics.com
sv
Sverige
Tel: 0200 21 46 81
tr
Daha fazla bilgi için:
www.plantronics.com
МЛ05
Plantronics B.V.
Scorpius 140
2132 LR Hoofddorp
Netherlands
www.plantronics.com
© 2010 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Plantronics
Explorer, QuickPair and Sound Innovation are trademarks or registered trademarks
of Plantronics, Inc. The Bluetooth name and the Bluetooth trademarks are owned by
Bluetooth SIG, Inc., and are used by Plantronics, Inc. under license. All other trademarks
are the property of their respective owners.
U.S. Patents Pending
83240-03 Rev A
Loading...