Files for
Size:
2.96 Mb
Download

SOUND & VISION MIXER

SVM-1000

Operating Instructions

K057_En
S002_En
D3-4-2-1-7b_A_En
D8-10-1-2_En
D3-4-2-1-7a_A_En
P1-4-2-2_En
D8-10-1-3_EF
D8-10-3a_En
D8-10-2_En
K015 En

Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.

In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However the method of connecting and operating the unit is the same.

IMPORTANT

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

D1-4-2-3_En-A

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that produce heat.

9)Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments/accessories specified by the manufacturer.

12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13)Unplug this apparatus during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Product Name:

SOUND & VISION MIXER

Model Number:

SVM-1000

Responsible Party Name: PIONEER ELECTRONICS SERVICE, INC.

Address:

1925 E. DOMINGUEZ ST. LONG BEACH, CA 90801-1760, U.S.A.

Phone:

1-800-421-1404

This product contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronics Industries Alliance : www.eiae.org.

The backlighting lamp of LCD in this equipment contains mercury. Disposal of this material may be regulated due to environmental considerations according to Local, State or Federal Laws. For disposal or recycling information, please contact your local authorities or the Electronics Industries Alliance: www.eiae.org

WARNING

This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain

or moisture.

D3-4-2-1-3_B_En

IMPORTANT NOTICE – THE SERIAL NUMBER FOR THIS EQUIPMENT IS LOCATED ON THE REAR. PLEASE WRITE THIS SERIAL NUMBER ON YOUR ENCLOSED WARRANTY CARD AND KEEP IN A SECURE AREA. THIS IS FOR YOUR SECURITY.

D1-4-2-6-1_En

Information to User

Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.

CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.

CAUTION

The POWER switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from the AC outlet in case of an accident. To avoid fire hazard, the power cord should also be unplugged from the AC outlet when left unused for a long period of time (for example, when

on vacation).

D3-4-2-2-2a_A_En

WARNING: Handling the cord on this product or cords associated with accessories sold with the product will expose you to chemicals listed on proposition 65 known to the State of California and other governmental entities to cause cancer and birth defect or other reproductive harm.

Wash hands after handling

D36-P4_A_En

WARNING

To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment.

VENTILATION CAUTION

When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 5 cm at rear, and 3 cm at each

side).

WARNING

Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. To prevent fire hazard, the openings should never be blocked or covered with items (such as newspapers, table-cloths, curtains) or by operating the equipment on thick carpet or a bed.

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement.

WARNING

This product equipped with a three-wire grounding (earthed) plug - a plug that has a third (grounding) pin. This plug only fits a grounding-type power outlet. If you are unable to insert the plug into an outlet, contact a licensed electrician to replace the outlet with a properly grounded one. Do not defeat the safety purpose of the grounding plug.

D3-4-2-1-6_A_En

D3-4-2-2-1a_A_En
D3-4-2-1-4_A_En mod
D3-4-2-1-7c_A_En

Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion-and, most importantly, without affecting your sensitive hearing.

Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.

To establish a safe level:

Start your volume control at a low setting.

Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.

Once you have established a comfortable sound level:

• Set the dial and leave it there.

Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want you listening for a lifetime.

We Want You Listening For A Lifetime

Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the Electronic Industries Association’s Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise. This list of sound levels is included for your protection.

Decibel

Level Example

30 Quiet library, soft whispers

40 Living room, refrigerator, bedroom away from traffic 50 Light traffic, normal conversation, quiet office 60 Air conditioner at 20 feet, sewing machine

70 Vacuum cleaner, hair dryer, noisy restaurant

80Average city traffic, garbage disposals, alarm clock at two feet.

THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE

90 Subway, motorcycle, truck traffic, lawn mower 100 Garbage truck, chain saw, pneumatic drill 120 Rock band concert in front of speakers,

thunderclap

140 Gunshot blast, jet plane

180 Rocket launching pad

Information courtesy of the Deafness Research Foundation.

S001_En

Operating Environment

Operating environment temperature and humidity: +5 ºC – +35 ºC (+41 ºF – +95 ºF); less than 85 %RH (cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light)

WARNING

Before plugging in for the first time, read the following section carefully.

The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., 230V or 120V) written on the bottom panel.

If the AC plug of this unit does not match the AC outlet you want to use, the plug must be removed and appropriate one fitted. Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. If connected to an AC outlet, the cut-off plug can cause severe electrical shock. Make sure it is properly disposed of after removal.

The equipment should be disconnected by removing the mains plug from the wall socket when left unused for a long period of time (for example, when on vacation).

Contents

 

CONFIRM ACCESSORIES..............................................

4

CAUTIONS REGARDING HANDLING............................

4

Location ..........................................................................................

4

Cleaning the Unit...........................................................................

4

Disclaimer ......................................................................................

4

About Copyright .............................................................................

4

FEATURES ....................................................................

4

NAMES AND FUNCTIONS OF PARTS ...........................

6

CONNECTION PANEL ...................................................................

6

OPERATION PANEL ......................................................................

7

CONNECTIONS...........................................................

10

CONNECTING INPUTS ................................................................

10

CONNECTING OUTPUTS ............................................................

11

CONNECTING MICROPHONE AND HEADPHONES ...............

12

CONNECTING THE POWER CORD ............................................

12

BASIC OPERATIONS...................................................

13

FADER CURVE SELECTION .......................................................

14

USING THE VIDEO CONTROL FUNCTIONS .................

15

OPERATING THE VIDEO CROSS FADER ..................................

15

OPERATING THE VIDEO CHANNEL SWITCH ...........................

15

OPERATING IN THE VIDEO SOLO MODE .................................

16

VIDEO MIX EFFECTS CHART ......................................................

16

USING THE EFFECT FUNCTION...................................

17

USING BEAT EFFECTS ................................................................

17

USING TOUCH EFFECTS .............................................................

19

USING TEXT EFFECTS .................................................................

20

EDITING TEXT ...............................................................................

22

DISPLAYING/HIDING THE MASTER MONITOR ........................

22

EFFECT LIST..................................................................................

23

USING THE JPEG VIEWER ..........................................

31

BEFORE USING THE JPEG VIEWER...........................................

31

JPEG VIEWER SETUP ..................................................................

31

THE VIDEO EQUALIZER FUNCTION............................

34

SET UP THE VIDEO EQ ................................................................

34

TURNING THE EQUALIZER ON/OFF ..........................................

34

FADER START FUNCTION ..........................................

35

CROSS FADER START PLAY AND BACK CUE PLAY................

35

PERFORM UTILITY SETUP ..........................................

36

MIDI SETTINGS ............................................................................

36

SYNCHRONIZING AUDIO SIGNALS TO EXTERNAL

 

SEQUENCER, OR USING SVM-1000 INFORMATION TO

 

OPERATE AN EXTERNAL SEQUENCER ....................................

36

MIDI CODE LIST ...........................................................................

37

PERFORM VIDEO MONITOR SETUP .........................................

41

KEYBOARD LANGUAGE SETUP.................................................

41

HARDWARE SETUP....................................................

42

MIC SETTING ................................................................................

42

SYSTEM SETTINGS.......................................................................

42

MASTER OUT SETTINGS .............................................................

43

LCD SETTINGS..............................................................................

43

MONITOR OUT SETTINGS ...........................................................

43

TOUCH PANEL SETTINGS...........................................................

44

RETURNING TO DEFAULT SETTINGS ........................................

44

ENDING HARDWARE SET UP ....................................................

44

TROUBLESHOOTING ..................................................

45

ABOUT THE LCD SCREEN ..........................................................

46

ABOUT MINIATURE FLUORESCENT TUBE TECHNOLOGY .....

46

SPECIFICATIONS........................................................

47

3

En

CONFIRM ACCESSORIES / CAUTIONS REGARDING HANDLING / FEATURES

CONFIRM

FEATURES

ACCESSORIES

4-Channnel Music and Video Synchromix

Power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Most conventional image mixing devices are limited to the simple mixing of two video images, but Pioneer’s own uniquely developed video blending technology makes it possible to simultaneously mix up to four channels of music and video. Since the synchro control allows the use of fader and equalizers with each channel, a new, wider range of performances is possible with the sensation of using conventional DJ mixers.

CAUTIONS REGARDING HANDLING

Location

Install the unit in a well-ventilated location where it will not be exposed to high temperatures or humidity.

Do not install the unit in a location which is exposed to direct rays of the sun, or near stoves or radiators. Excessive heat can adversely affect the cabinet and internal components. Installation of the unit in a damp or dusty environment may also result in a malfunction or accident. (Avoid installation near cookers etc., where the unit may be exposed to oily smoke, steam or heat.)

When the unit is used inside a carrying case or DJ booth, separate it from the walls or other equipment to improve heat radiation.

Cleaning the Unit

Use a polishing cloth to wipe off dust and dirt.

When the surfaces are very dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water and wrung out well, then wipe again with a dry cloth. Do not use furniture wax or cleaners.

Never use thinners, benzene, insecticide sprays or other chemicals on or near this unit, since these will corrode the surfaces.

Disclaimer

Microsoft and Windows are registered trademarks of Microsoft Corporation, registered in the U.S. and other countries.

Apple and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.

The typefaces included herein are partially developed by DynaComware Taiwan Inc.

About Copyright

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited consumer uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

In the event that the above noted copy protection function operates in any channel, some effects (DELAY, ECHO, ROLL, REVERSE ROLL) will not function.

“AV Effects” support a wide variety of new performance styles by synchronizing music and video.

Equipped with AV Effects that synchronize music effects and video effects on the large 11-inch LCD touch panel display, allowing up to 30 types of effects to be applied to your music and images.

1Beat effect: Automatically detects the tempo of the currently playing track, and applies effects to music and image in synch with the beat.

2Touch effect: By directly touching the image displayed on the large LCD touch panel, effects can be applied to music and video more intuitively.

3Text effect: Text messages created in synchronization with the automatically detected track tempo can be displayed with effects. Text messages can be entered either by the built-in keyboard or a common USB keyboard.

“JPEG VIEWER” allows use of images stored in external memory for live performances

Up to eight JPEG files saved on SD memory cards or USB memory devices can be downloaded and used as a still image sampler. By applying effects or mixing with other videos and images such as the name of the DJ or event, or graphic logos, you can broaden the potential of your performance. Additionally, JPEG files can be loaded and displayed as an automatic slide show.

Digital sound/video system for high quality sound and image

1 96 kHz/24-bit sampling digital system for high sound quality

Analog signals input from a DJ player are passed through the shortest possible signal path and digitized using a high-fidelity A/D converter with 96 kHz/24-bit sampling, producing optimum quality for digital mixing. Mixing is performed by a 32-bit DSP to eliminate any degradation in sound quality, while simultaneously using ideal filtering to produce optimum sound for DJ play.

In order to realize the greatest possible response, the unit also features a high-rigidity chassis and double-shield construction to suppress unwanted vibrations that might adversely effect sound quality, together with a powerful power section and other highfidelity technology, thus producing clear, powerful club sounds.

2 High-performance video IC digital system for high image quality

Video signals input through the high-performance ADC are processed through a high-performance video DSP rated at 600 MHz/32-bit/4800 MIPS (Million Instructions Per Second), thus preserving the original image’s dynamic range while also suppressing unwanted noise and producing images with high fidelity and quality. The same high quality has also been realized for video effects that normally tend to be a source of image degradation.

4

En

FEATURES

Improved design and operability for new club culture

Based on the concept of creating “a design that fascinates,” the boxy-shape of previous DJ mixers has been restyled toward an edgier and more solid design. Great attention has been given to details of materials and design, such as employing an “illumination display” on the rear panel visible from the dance floor.

Operating panel design emphasizes convenience for simultaneous performances of music and video, with a “channel symmetry layout” centered around the 11-inch LCD touch panel. By arranging each channel section symmetrically, further improvements in operability have been made to assist easy mixing between music and video, so that effects can be enabled dynamically from the LCD touch panel.

Other DJ/VJ performance functions made possible through digital technology

1“VIDEO TRIM” allows adjustment of the luminance of images input to each channel.

2“VIDEO EQUALIZER” assigns parameters such as [RGB], [CONTRAST], [HUE], and [SATURATION] to the equalizer, allowing synchronization of audio equalizing and video controls.

3“AV SYNC” allows the user to select whether audio and video controls are linked or adjusted separately.

4“VIDEO MONITOR SELECTOR” allows the user to choose whether the monitor video output shows master only, all channels, master and each channel, master mixing inversion, etc.

5“FULLY ASSIGNABLE MIDI” allows control of DJ effecter, DJ/ VJ application programs, and other external components.

Installing the SVM-1000 in an EIA rack

The screw holes located on the left and right ends of the front panel (within the side cover) match the 19-inch EIA rack.

Remove the 10 screws (five screws each located on the left and right sides of the unit) before installing the unit to the rack.

Screws

Side cover

Holes for rack installation can be located when the side covers are removed.

Attach the unit to the rack using screws of the appropriate size (screws not provided with the unit).

When installing the unit in a rack, take care to avoid pinching your fingers.

Note

Never place this unit directly above a power amplifier, as the heat given off by the amplifier might result in damage to the unit. Placing the unit directly above a power amplifier might also result in ham radio signals being picked up or in other types of interference.

Allow at least 1U (43.7 mm) space between this component and the one mounted above it, so as to assure that the cords connected to this unit's input/output connectors and terminals do not touch the component above.

Always be sure to remove the unit from its rack before shipping.

When moving the unit while still installed in its rack, exercise caution to avoid subjecting the unit to shocks or vibration.

5

En

NAMES AND FUNCTIONS OF PARTS

NAMES AND FUNCTIONS OF PARTS

CONNECTION PANEL

1

2

3

4

5

6

7

5

 

8

9

 

 

10 11

 

12

6

7

5

2

3

4

5

13

 

4

 

SIGNAL GND

 

3

 

 

AUDIO OUT

 

1 GND 2 HOT

 

 

 

 

 

 

2

 

 

1

SIGNAL GND

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MASTER

REC

 

 

 

 

 

 

 

 

 

 

 

PHONO DVD/LINE

 

LINE

DVD

 

R

MASTER OUT 1

L

3 COLD

 

 

OUT 2

OUT

 

BOOTH

LINE

DVD

 

PHONO DVD/LINE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MONITOR

 

 

 

 

 

 

MIC2

 

L

 

 

L

 

 

 

 

 

 

MASTER

L

 

 

 

(TRS)

L

 

L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R

L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ATT.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONTROL

 

 

CONTROL

 

 

 

 

 

 

 

 

 

 

 

CONTROL

 

CONTROL

 

 

 

 

 

 

 

 

 

 

 

 

-6 dB

-3 dB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0 dB

 

 

 

 

 

 

 

 

 

 

 

 

 

POWER

R

 

 

R

 

 

 

 

 

 

 

 

R

 

 

 

 

R

 

R

 

 

 

 

 

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ON

 

SYNC

DIGITAL

SYNC

 

 

 

 

 

DIGITAL

OUT

 

 

 

DIGITAL

SYNC

 

 

SYNC

 

MIDI

 

 

 

OUT

OUT

 

14

15 16

 

17

15

OUT

 

14

OUT

 

 

 

 

 

 

IN

 

 

fs (Hz)

 

 

IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OUT

 

 

 

 

 

 

 

 

 

48 k

96 k

 

 

 

 

 

 

 

 

 

 

 

DVD

 

 

DVD

 

VIDEO OUT

 

MASTER

 

 

 

MONITOR

 

DVD

 

 

DVD

 

 

 

AC IN

S-VIDEO

 

S-VIDEO

 

 

 

COMPONENT

COMPOSITE

 

 

 

S-VIDEO

 

 

S-VIDEO

 

 

USB

 

 

 

 

 

 

 

 

 

Y

CB

CR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO

 

 

VIDEO

 

 

 

 

 

 

 

 

S-VIDEO

S-VIDEO

 

VIDEO

 

 

VIDEO

 

 

 

18

 

19

 

19

 

 

 

 

20

 

 

 

 

21

19

 

19

22

23

1POWER switch

2PHONO input connectors

RCA type phono level (MM cartridge) input connectors. Do not use for inputting line level signals.

3 DVD/LINE input connectors

RCA type line level audio input connectors.

Use to connect a DJ/VJ DVD player or DJ CD player or other line level output component.

4 Signal ground terminal (SIGNAL GND)

Connect the ground wire from an analog turntable. This is not a safety ground terminal.

5 CONTROL connector

Connect the Ø 3.5 mm mini phone plug of the control cable from a DJ/VJ DVD player or DJ CD player.

When this is done, this mixer’s fader controls can be used to perform start and back-cue functions on the connected DJ/VJ DVD player or DJ CD player.

6 LINE input connectors

RCA type line level audio input connectors.

Use to connect a cassette deck or other line level output component.

7 DVD input connectors

RCA type line level audio input connectors.

Use to connect a DJ/VJ DVD player or DJ CD player or other line level output component.

8 Audio master output 1 connectors (MASTER OUT 1)

XLR type (male) balanced output.

When using a cord with RCA-type plug, users are recommended to connect the plug directly to the MASTER OUT 2 connectors without using an XLR/RCA converter plug.

When a conversion plug is used, the signal GND may become unstable, in rare cases resulting in the production of noise.

9Audio master output attenuator selector (MASTER ATT.)

Attenuates the output level of the audio master 1 and audio master

Attenuation level can be selected as 0 dB, –3 dB, or –6 dB.

10Audio master output 2 connectors (MASTER OUT 2)

RCA-type unbalanced output.

11Recording output connectors (REC OUT)

RCA type output connectors for recording.

12BOOTH MONITOR output jacks (TRS)

Ø 6.3 mm phone-type booth monitor output jacks.

The sound level output at these connectors can be controlled by the BOOTH MONITOR level dial, regardless of the setting of the MASTER LEVEL dial. (Since the output is TRS, both balanced and unbalanced outputs are supported.)

13 Microphone 2 input jack (MIC 2)

Connect microphones equipped with phone-type plug.

14 Sync signal output connector (SYNC OUT)

Outputs video sync signal.

When connecting a Pioneer DJ/VJ DVD player (sold separately), the sync signal helps suppress any lag between video and audio signals.

15 Digital input connector (DIGITAL IN)

RCA-type digital coaxial input connector. Connect to the digital coaxial output connector from a DJ/VJ DVD player or DJ CD player.

If the sampling frequency of the output signal changes, the sound may be interrupted briefly.

16 Sampling frequency selector switch (fs 48 k/96 k)

Use to set the sampling frequency of the digital output to 96 kHz/ 24-bit format or 48 kHz/24-bit format.

Turn power off before changing this switch position.

17Digital output connector (DIGITAL OUT)

RCA type digital coaxial output connector. Master audio digital output.

18Power inlet (AC IN)

Use the furnished power cable to connect to a household AC outlet.

19Video input connectors (DVD, VIDEO, S-VIDEO)

Composite and S-VIDEO type video input connectors.

20Video master output connectors

(MASTER: COMPONENT, COMPOSITE, S-VIDEO)

Component, composite, and S-VIDEO type video output connectors.

21 Video monitor output connectors (MONITOR, S-VIDEO)

Composite and S-VIDEO type monitor video output connectors.

6

En

NAMES AND FUNCTIONS OF PARTS

22 MIDI OUT connector

23 MIDI USB output connector

DIN type output connector.

USB-B type output connector. Use to connect to a computer.

Use to connect to other MIDI component.

 

OPERATION PANEL

1

 

14 VIDEO INPUT

 

VIDEO INPUT

15

16

 

VIDEO INPUT

17VIDEO INPUT

 

VIDEO

32

USB

 

 

DVD VIDEO S-VIDEO

DVD VIDEO S-VIDEO

 

 

DVD VIDEO S-VIDEO

 

 

 

DVD VIDEO S-VIDEO

MASTER LEVEL

 

 

 

VIDEO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO

 

 

 

 

 

 

 

 

EX

 

 

 

 

 

18

 

 

 

 

 

 

 

 

 

 

 

EX

 

 

 

CH 1

 

 

VIDEO TRIM

18

VIDEO TRIM

 

 

18

VIDEO TRIM

 

18

VIDEO TRIM

BLACK

WHITE

 

VIDEO

 

 

 

 

 

20

 

 

 

MONO STEREO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EX

 

 

 

 

 

 

 

 

 

 

21

 

 

 

 

 

 

 

 

33

2

CH 4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

UTILITY

 

 

 

 

 

 

 

 

 

 

 

 

MIC

 

 

MIN

MAX

MIN

 

MAX

MASTER

MIN

 

MAX

 

 

MIN

MAX AUDIO MASTER LEVEL

 

 

 

 

MONITOR

CH SELECT

 

 

 

 

 

 

AUDIO INPUT

AUDIO INPUT

SET UP

 

AUDIO INPUT

 

 

 

AUDIO INPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD/LINE PHONO 19 DVD

LINE

DIGITAL

40

45

DVD

LINE

DIGITAL 22

LINE PHONO

 

 

34

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

23

AUDIO TRIM OVER

23

AUDIO TRIM OVER

VIDEO EQ

 

OVER

AUDIO TRIM

23

OVER

AUDIO TRIM

23

OVER

0

 

 

 

ON/OFF

 

 

 

 

 

 

 

 

 

 

 

 

SET UP

 

 

 

 

 

 

 

 

 

 

 

 

MIC 1

 

 

 

 

 

 

 

 

41

27

 

 

 

 

 

 

 

 

 

 

4

MIC1

 

 

 

 

10

 

 

 

 

10

10

 

 

 

 

 

 

10

 

 

 

10

 

LEVEL

 

 

 

+9

7

 

 

 

+9

7

 

 

7

 

 

+9

 

 

 

7

 

+9

 

7

 

 

 

24

 

HI

4

24

 

HI

 

4

 

VIDEO FX

4

 

HI

 

24

 

4

 

HI

24

4

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MIC2

 

 

2

 

 

 

2

 

PATTERN/

2

 

 

 

 

2

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

TEXT BANK

 

 

 

 

 

 

 

 

 

 

LEVEL

 

 

 

1

 

 

 

1

 

1

 

 

 

 

1

 

 

1

 

 

 

 

 

 

 

 

 

 

46

 

 

 

 

 

 

 

 

 

35

 

 

0

 

-26

+6

0

 

-26

 

+6

0

 

0

-26

 

+6

 

 

 

0

-26

+6

 

0

 

 

 

–1

 

 

–1

 

–1

 

 

 

 

–1

 

–1

 

HI

 

 

 

MID

 

 

MID

 

 

 

 

MID

 

 

 

 

 

MID

 

 

6

 

25

 

 

–2

25

 

 

 

–2

 

 

–2

 

 

 

25

 

–2

 

 

25

–2

 

 

 

 

 

 

 

 

 

TIME/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-12

+12

 

 

–3

 

 

 

–3

 

PARAMETER

–3

 

 

 

 

–3

 

 

–3

 

 

 

 

 

–5

 

 

 

 

–5

 

47

–5

 

 

 

 

 

 

–5

 

 

 

–5

 

 

LOW

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

 

26

-26

+6

 

26

-26

 

+6

 

 

–7 -26

 

+6

26

 

–7 -26

+6

26

 

 

 

 

–7

 

–7

 

 

 

–7

 

-12

+12

 

LOW

–10

 

LOW

 

–10

 

LEVEL/

–10

LOW

 

 

–10

 

LOW

–10

 

 

 

 

 

 

 

 

 

 

 

JPEG

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TALK

 

 

 

–15

 

 

 

 

–15

DEPTH

–15

 

 

 

 

 

–15

 

 

 

–15

 

8

MIC OFF ON OVER

 

 

 

 

 

 

 

 

 

VIEWER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

–24

 

 

 

 

–24

42

48

–24

 

 

 

 

 

–24

 

 

–24

 

FADER START

 

-26

+6

dB

 

-26

 

+6

dB

dB

-26

 

+6

 

 

dB

 

-26

+6

 

L dB

R

 

 

 

 

 

27

 

 

 

 

27

MIN MAX

 

 

 

 

27

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH1

 

 

 

 

 

 

 

 

 

EFFECT

 

 

 

 

 

 

 

 

 

 

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

28

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CUE

 

 

 

CUE

 

 

 

CUE

 

 

CUE

 

 

 

 

 

 

CUE

 

CUE

CH2

 

 

 

 

 

 

 

 

 

 

 

28

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

28

2

 

28

 

28

 

 

3

28

 

4

MASTER

 

CH3

 

 

VIDEO

 

 

 

 

 

CH4

 

 

 

 

10

 

 

 

 

10

SOLO MODE

 

10

 

 

 

 

 

10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

43

49

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

 

 

 

 

9

9

 

 

 

 

 

9

 

 

 

 

BALANCE

 

HEAD PHONES

 

 

 

8

 

 

 

 

8

8

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MONO SPLIT

STEREO

 

 

 

7

 

 

 

 

7

 

 

7

 

 

 

 

 

7

 

 

 

 

 

36

10

 

 

 

 

 

6

 

 

 

 

6

FADER

EFFECT

6

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

5

5

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AV SYNC

ON/OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

4

4

 

 

 

 

 

4

 

 

 

 

 

 

MIXING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L

R

 

 

 

 

3

 

 

 

 

3

44

50

3

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BOOTH MONITOR

 

 

 

 

 

 

2

 

 

 

 

2

2

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

1

1

 

 

 

 

 

1

 

 

 

 

 

 

11

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

0

 

 

0

 

 

 

 

 

0

 

 

 

 

 

37

CUE

MASTER

 

29

 

 

 

29

 

 

 

 

 

 

 

29

 

 

 

 

 

 

 

 

 

 

29

 

 

 

 

 

 

 

 

 

 

 

LEVEL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

12

 

 

CROSS FADER

CROSS FADER

 

CROSS FADER

 

 

CROSS FADER

 

 

 

 

 

ASSIGN

 

 

ASSIGN

 

 

 

 

ASSIGN

 

 

 

 

ASSIGN

CH FADER CURVE

 

 

 

 

 

 

 

 

 

 

 

 

30

 

 

 

 

 

 

 

 

 

 

 

 

38

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A

THRU B

 

 

A

THRU

B

 

 

51

 

A

THRU

B

 

30 A

THRU B

 

 

 

 

PHONES

 

 

30

 

 

 

30

 

CROSS FADER CURVE

 

 

 

SD CARD

 

 

39

13

 

 

 

PROFESSIONAL SOUND&VISION MIXER

A

B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SVM-1000

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

31

 

 

 

 

 

 

1 USB connector

Use to connect a USB memory or keyboard.

2CH1/CH4 video input connectors (VIDEO EX)

Use to input video from an external source.

3Microphone 1 input jack (MIC 1)

Connect microphone with XLR-type or phone-type plug.

4 Microphone 1 level control dial (MIC 1 LEVEL)

Use to adjust the volume of microphone 1. (Adjustable range – to 0 dB)

5 Microphone 2 level control dial (MIC 2 LEVEL)

Use to adjust the volume of microphone 2. (Adjustable range – to 0 dB)

6 Microphone equalizer high-range adjust dial (HI)

Use to adjust the treble (high-range) frequencies of microphones 1 and 2. (Adjustable range –12 dB to +12 dB)

7 Microphone equalizer low-range adjust dial (LOW)

Use to adjust the bass (low-range) frequencies of microphones 1 and 2. (Adjustable range –12 dB to +12 dB)

8 Microphone function selector switch (MIC)

OFF:

No microphone sound is output.

ON:

Microphone sounds are output, and the microphone function indicator lights.

TALK OVER:

Microphone sounds are output, and the microphone function indicator flashes.

When an audio signal of –15 dB or more (default setting) is input to the microphone input, the talkover function operates to reduce all output other than the mike audio by 20 dB (default setting).

Values can be changed in the hardware setup (P. 42)

When not using the TALK OVER function, it is recommended to set the switch to the [OFF] or [ON] position.

9 FADER START button/indicator (CH-1 to CH-4)

Enables the fader start/back cue function for the channel to which a DJ/VJ DVD player or DJ CD player is connected. The button lights when set to ON. When enabled, the operation differs depending on the setting of the CROSS FADER ASSIGN switch.

When the CROSS FADER ASSIGN switch is set to the [A] or [B] position, FADER START button operation is linked to the operation of the cross fader (and unlinked to channel fader).

When the CROSS FADER ASSIGN switch is set to the [THRU] position, FADER START button operation is linked to the operation of the channel fader (and unlinked to cross fader).

7

En

NAMES AND FUNCTIONS OF PARTS

10 HEADPHONES output switch (MONO SPLIT/STEREO)

MONO SPLIT:

The source sound selected with the headphone CUE button is output to the L channel, while the master sound is output to the R channel (only when [MASTER] is selected with the headphone CUE button).

STEREO:

The audio source selected with the headphone CUE button is output in stereo.

11 HEADPHONES MIXING dial

When rotated clockwise (toward [MASTER]), the master output audio is produced at the headphones (only when [MASTER] has been selected with the headphone CUE button); when rotated counterclockwise (toward [CUE]), the headphones output becomes the mixture of the effect monitor and the channel selected with the headphone CUE button.

12 HEADPHONES LEVEL adjust dial

Adjusts the output level of the headphones jack. (Adjustable range: – to 0 dB)

13Headphones jack (PHONES)

14Channel 1 VIDEO INPUT selector switch

Set to [DVD], [VIDEO], [S-VIDEO], or [VIDEO EX] to match the type of input connected.

15 Channel 2 VIDEO INPUT selector switch

Set to [DVD], [VIDEO], or [S-VIDEO] to match the type of input connected.

16 Channel 3 VIDEO INPUT selector switch

Set to [DVD], [VIDEO], or [S-VIDEO] to match the type of input connected.

17 Channel 4 VIDEO INPUT selector switch

Set to [DVD], [VIDEO], [S-VIDEO], or [VIDEO EX] to match the type of input connected.

18 VIDEO TRIM dial

Use to adjust the level of the video input signal for each channel.

When rotated counterclockwise, the luminance level is reduced, eventually producing a black screen.

When rotated clockwise, the luminance level is raised, eventually producing a white screen.

At the center position, the luminance level is neutral (same level as input).

19 Channel 1 AUDIO INPUT selector switch

DVD/LINE:

Use to select DVD/LINE input connectors (line level analog input).

PHONO:

Use to select PHONO input connectors (PHONO level analog input).

20 Channel 2 AUDIO INPUT selector switch

DVD:

Use to select DVD input connectors.

LINE:

Use to select LINE input connectors (line level analog input).

DIGITAL:

Use to select DIGITAL input connector.

21 Channel 3 AUDIO INPUT selector switch

DVD:

Use to select DVD input connectors.

LINE:

Use to select LINE input connectors (line level analog input).

DIGITAL:

Use to select DIGITAL input connector.

22 Channel 4 AUDIO INPUT selector switch DVD/LINE:

Use to select DVD/LINE input connectors (line level analog input).

PHONO:

Use to select PHONO input connectors (PHONO level analog input).

8

23 AUDIO TRIM dial

Use to adjust the level of the audio input signal for each channel. (Adjustable range: – to +9 dB, mid-position is about 0 dB)

24 Channel equalizer high-range adjust dial (HI)

Use to adjust the treble (high-range) frequency sound for each channel. Video parameters can also be assigned. See P. 34 regarding video parameters. (Adjustable range: –26 dB to +6 dB)

25 Channel equalizer mid-range adjust dial (MID)

Use to adjust the mid-range frequency sound for each channel. Video parameters can also be assigned. See P. 34 regarding video parameters. (Adjustable range: –26 dB to +6 dB)

26 Channel equalizer low-range adjust dial (LOW)

Use to adjust the bass (low-range) frequency sound for each channel. Video parameters can also be assigned. See P. 34 regarding video parameters. (Adjustable range: –26 dB to +6 dB)

27 Channel level indicator

Displays the current level for each channel, with two-second peak hold.

28 Headphone CUE buttons/indicators

These buttons are used to select from 1 to 4, MASTER, or EFFECT CUE, to allow you to monitor the desired source through headphones. If multiple buttons are pressed simultaneously, the selected audio sources are mixed. Press the button once more to cancel the selected source. Unselected buttons glow darkly, while selected source buttons light brightly.

29 Channel fader lever

Use to adjust sound volumes and video level for each channel. (Volume adjust range: – to 0 dB) (Video adjust range: 0 % to 100 %)

Output is in accordance with the channel fader curve selected with the CH FADER CURVE switch.

When FADER AV SYNC function is OFF, only sound volume can be adjusted.

30 CROSS FADER ASSIGN switch

This switch assigns each channel’s output to either right or left side of the cross fader (if multiple channels are assigned to the same side, the result will be the combined sum of the channels).

A:

The selected channel is assigned to the cross fader’s [A] (left) side.

THRU:

The channel fader’s output is sent as is to the master output, without being passed through the cross fader.

B:

The selected channel is assigned to the cross fader’s [B] (right) side.

31 CROSS FADER CURVE switch

This switch allows the user to select from three types of cross fader curve response.

Sound volume changes as follows:

At the left setting, the curve produces a rapid signal rise. (As soon as the cross fader lever leaves the [A] side, the [B] channel sound is produced.)

At the right setting, the curve operates to produce an even, neutral rise throughout the cross fader’s movement.

At the middle setting, an intermediate curve is produced, midway between the two curves noted above.

The video level is as noted above only when the video cross fader’s video mix effect is set to [FADE].

32Video master output level dial (VIDEO MASTER LEVEL)

Adjusts the video master output luminance level.

33Master output MONO/STEREO selector switch

When set to the [MONO] position, audio master output is produced in L+R monaural.

34 Audio master output level dial (AUDIO MASTER LEVEL)

Use to adjust the master output level. (Adjustable range: – to 0 dB)

The master output is the sum combination of the sound from channels set to [THRU] with the CROSS FADER ASSIGN switch; the signal passed through the cross fader; and the signals from microphone 1 and microphone 2.

En

NAMES AND FUNCTIONS OF PARTS

35 Master level indicator (MASTER L, R)

These segment indicators display the audio output level from L and R channels. The indicators have a two-second peak hold.

36 Master balance dial (BALANCE)

Use to adjust the L/R channel balance for audio master output, booth monitor output, recording output, and digital output.

37 BOOTH MONITOR level control dial

This dial is used to adjust the booth monitor output volume. The volume can be adjusted independently of the master output level. (Adjustable range: – to 0 dB)

38 Channel fader curve switch (CH FADER CURVE)

This switch allows the user to select from three types of channel fader curve response.

The sound volume and video level changes as follows: This setting is applied equally to channels 1 to 4.

At the left setting, the curve operates to produce a rapid rise as the channel fader approaches its distant position.

At the right setting, the curve operates to produce an even, neutral rise throughout the channel fader’s movement.

At the middle setting, an intermediate curve is produced, midway between the two curves noted above.

39SD CARD slot

Insert an SD card.

40UTILITY button (MASTER MONITOR, SET UP)

Switches between display / no display of the master monitor on the LCD. When the master monitor is set to display, the indicator lights. When the button is held depressed, the indicator changes to flashing, and the LCD screen changes to show the utility setup menu.

41 VIDEO EQ button (ON/OFF, SET UP)

Switches the video equalizer ON/OFF. The indicator lights when the video equalizer is ON. When the button is held depressed, the indicator flashes, and the LCD display changes to show the equalizer setup menu.

42 JPEG VIEWER button

Use to set the JPEG viewer mode. The indicator lights when in the JPEG viewer mode.

43 VIDEO SOLO MODE button

Use to switch the video solo mode ON/OFF. When the video solo mode is ON, the indicator will flash.

44 Fader AV synchro button (FADER AV SYNC)

This button determines whether sound and video are controlled together, or independently. When set to ON, the indicator lights, and the channel fader and cross fader operations change both sound and video simultaneously. When set to OFF, the channel fader and cross fader levers control sound only, while video is controlled by the touch panel.

45 Effect channel selector dial (CH SELECT)

Use to select the channel to which effects are applied. When [MIC] is selected, effects are applied to both microphone 1 and microphone 2.

46 VIDEO FX PATTERN/TEXT BANK dial

Use to select video effects, video effect patterns and text banks.

47 Effect parameter 1 dial (TIME/PARAMETER)

Adjusts parameter for selected effect.

If this dial is rotated while depressing the TAP button, direct BPM can be set manually.

48Effect parameter 2 dial (LEVEL/DEPTH)

Adjusts quantitative parameters for selected effect.

49TAP button

The BPM is calculated from the intervals at which the TAP button is struck.

50 Effect button/indicator (EFFECT ON/OFF)

Turns selected effect ON/OFF.

When power is turned ON, the button lights (defaults to effect OFF). When effects are enabled (ON), the button flashes.

51 Cross fader lever (A/B)

This adjusts sound and video levels assigned to sides [A] and [B] in accordance with the CROSS FADER ASSIGN switches. When FADER AV SYNC is OFF, the control adjusts the sound only.

9

En

CONNECTIONS

CONNECTIONS

Always turn off the power switch and disconnect the power plug from its outlet when making or changing connections.

CONNECTING INPUTS

 

4

SIGNAL GND

3

 

2

 

1

SIGNAL GND

 

 

PHONO DVD/LINE

LINE

DVD

LINE

DVD

PHONO DVD/LINE

 

 

L

 

 

 

L

 

L

 

 

 

 

CONTROL

 

CONTROL

 

CONTROL

 

CONTROL

 

POWER

R

 

R

 

R

 

R

 

 

OFF

 

 

 

 

 

 

 

 

 

ON

SYNC

DIGITAL

SYNC

DIGITAL

SYNC

 

SYNC

MIDI

 

 

OUT

OUT

OUT

 

OUT

 

 

 

IN

 

IN

 

 

 

 

 

 

 

 

96 k

 

 

 

 

AC IN

 

 

 

 

 

 

S-VIDEO

 

 

L R

 

L R

 

L R

L R

L R

 

R L

Cassette deck, etc.

CD player, etc.

Analog turntable

DJ/VJ DVD player or

DJ/VJ DVD player or

Analog turntable

 

DJ CD player

DJ CD player

 

Pioneer DJ/VJ DVD players or DJ CD players

Audio cable connection

A DJ/VJ DVD or DJ CD player’s audio output connectors can be connected to this unit’s DVD, DVD/LINE or LINE connectors. When using the player’s digital output, connect to this unit’s channel 2 or channel 3 DIGITAL IN connector. Use the AUDIO INPUT selector switch (on top panel of this unit) to select the proper connector.

Likewise, the control cord should be connected to the CONTROL connector of the selected channel.

Video cable connection

A DJ/VJ DVD player’s video output connectors can be connected to this unit’s DVD, VIDEO, or S-VIDEO connectors. When this is done, use the VIDEO INPUT selector switch (on top panel of this unit) to select the proper connector.

Likewise, connect a commercially available sync signal cable to the SYNC OUT connector of the selected channel.

Connecting an analog turntable

Connect the audio output cables from an analog turntable to this unit’s Channel 1 or 4 PHONO input connectors, then set the connected channel’s AUDIO INPUT switch (on the upper panel of this unit) to [PHONO]. This unit’s PHONO input supports MM cartridges.

Connect the ground wire from an analog turntable to the SIGNAL GND terminal of the SVM-1000.

Note that no PHONO input connector is provided for channel 2 and 3.

Connecting other line level output devices

To use a cassette deck or ordinary CD player, connect its audio output connectors to one of the SVM-1000's LINE input connectors (channel 1 to 4).

10

En

CONNECTIONS

CONNECTING OUTPUTS

Power amplifier (RCA plug input connectors)

MASTER ATT. switch

R L

Cassette deck

Digital input AV amplifier

(analog input

 

(digital input

recording device)

 

recording device)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L

R

 

4

SIGNAL GND

3

 

AUDIO OUT

 

1 GND 2 HOT

 

 

 

 

2

 

1

SIGNAL GND

 

 

 

 

 

 

 

 

 

MASTER

REC

 

 

 

 

 

 

 

 

PHONO DVD/LINE

LINE

DVD

MASTER OUT 1

L

3 COLD

OUT 2

OUT

BOOTH

 

LINE

DVD

PHONO DVD/LINE

 

 

 

 

 

 

R

 

 

MONITOR

 

 

 

 

 

MIC2

 

L

L

 

 

 

 

MASTER L

 

(TRS)

 

L

 

L

 

 

 

 

 

 

 

R

L

 

 

 

 

 

 

 

 

 

 

 

ATT.

 

 

 

 

 

 

 

 

CONTROL

 

CONTROL

 

 

 

 

 

 

 

CONTROL

 

CONTROL

 

 

 

 

 

 

-3 dB

 

 

 

 

 

 

 

 

 

 

 

 

 

-6 dB

0 dB

 

 

 

 

 

 

 

 

POWER

R

R

 

 

 

 

 

R

 

 

 

R

 

R

 

 

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ON

SYNC

DIGITAL

SYNC

 

 

 

DIGITAL OUT

 

 

 

DIGITAL

SYNC

 

SYNC

MIDI

 

 

OUT

OUT

 

 

 

 

 

 

OUT

 

OUT

 

 

 

IN

 

 

 

fs (Hz)

 

 

 

IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OUT

 

 

 

 

 

 

 

48 k

96 k

 

 

 

 

 

 

 

 

 

DVD

 

DVD

VIDEO OUT

 

MASTER

 

 

MONITOR

 

 

DVD

 

DVD

 

AC IN

S-VIDEO

 

S-VIDEO

 

COMPONENT

COMPOSITE

 

 

 

S-VIDEO

 

S-VIDEO

 

USB

 

 

Y

CB

CR

 

 

 

 

 

 

 

 

 

VIDEO

 

VIDEO

 

 

 

 

S-VIDEO

S-VIDEO

 

 

VIDEO

 

VIDEO

 

Sampling frequency selector switch

Power amplifier

Plasma display

Display

Power amplifier

(XLR plug input connectors)

 

(for monitor)

(for booth monitor)

Audio master output

This unit is furnished with balanced output MASTER OUT 1 (supporting XLR plugs), and unbalanced output MASTER OUT 2 (supporting RCA plugs).

Using the MASTER ATT. switch, adjust the output level to match the input sensitivity of the power amplifier used.

If the operating panel’s MONO/STEREO switch is set to [MONO], the master output will be a monaural combination of L+R channels.

Recording output

These are output connectors for recording, supporting RCA plugs.

Digital output

This is a coaxial digital output connector, supporting RCA plugs. The sampling frequency can be set to 96 kHz/24-bit format or

48 kHz/24-bit format to match the connected device. Turn power off before changing this switch position.

Booth monitor output

TRS output for ø 6.3 mm phone plug. The sound volume for this output is controlled by the BOOTH MONITOR level dial, independently of the master output level setting.

Video master output

Supports component, composite (RCA, BNC connector) and S- VIDEO outputs.

Monitor output

Supports composite and S-VIDEO outputs.

11

En

CONNECTIONS

CONNECTING MICROPHONE AND HEADPHONES

Microphone

A microphone with XLR-type or Ø 6.3 mm phone-type plug can be connected to the MIC 1 connector on the operation panel (upper) . The MIC 2 jack on the connection panel (rear) can be used to connect a microphone with Ø 6.3 mm phone-type plug.

When using a microphone, set the operating panel’s MIC switch to [ON] or [TALK OVER], and adjust the LEVEL dial as necessary.

When not using a microphone, it is recommended to set the

MIC switch to [OFF] and rotate the LEVEL dial fully counterclockwise to the [–] side.

HEAD PHONES

8

MONO SPLIT

STEREO

7

 

 

6

 

 

5

MIXING

4

3

 

 

2

 

 

1

 

 

0

CUE

MASTER

 

LEVEL

 

 

 

CROSS FADER

 

 

ASSIGN

 

0

 

 

 

A THRU B

PHONES

 

 

 

PROFESSIONAL SO

Headphones

 

SVM

USB

Microphone 1

CH 1

VIDEO

EX

CH 4

MIC

MIC 1

External video connector

MIC2

MIDI

OUT

Microphone 2

USB

Headphones

The PHONES jack on the operating panel (upper) can be used to connect headphones with a Ø 6.3 mm stereo phone plug.

A camera, DVD player or other video output device can be connected to the CH 1/CH 4 video input connectors on the operating panel (top).

 

USB

 

CH 1

 

VIDEO

 

EX

 

CH 4

 

MIC

Video cameras and

 

devices

MIC 1

CONNECTING THE POWER CORD

Connect the power cord last.

When all connections are completed, connect one end of the furnished power cord to the AC inlet on the rear panel, and the plug on the other end to a household AC outlet, or the auxiliary power outlet on an amplifier. Use only the furnished power cord for this connection.

12

En

BASIC OPERATIONS

BASIC OPERATIONS

POWER

VIDEO

VIDEO MASTER LEVEL

INPUT

VIDEO TRIM

AUDIO

AUDIO MASTER LEVEL

INPUT

AUDIO TRIM

 

HI

HI, MID,

HI, MID,

LOW

LOW

Channel fader

 

lever

 

 

BALANCE

CROSS FADER

 

ASSIGN

Cross fader lever

 

(A/B)

1Set rear panel POWER switch to [ON].

2Set the AUDIO INPUT switch for the desired channel to match the type of connected component.

When using the DVD input, set to [DVD].

When using LINE input, set to [LINE].

When using DVD/LINE input, set to [DVD/LINE].

When using DIGITAL input, set to [DIGITAL].

When using PHONO input, set to [PHONO].

3Use the VIDEO INPUT switch for the selected channel to choose the video input.

4Use the AUDIO TRIM dial to adjust the input level for each channel.

5Use the VIDEO TRIM dial to adjust the input level for each channel.

6Use the channel equalizer dials (HI, MID, LOW) to adjust the tone.

7Use the channel fader lever to adjust the sound volume of the selected channel.

8To use the cross fader on the selected channel, set the CROSS FADER ASSIGN switch to either cross fader channel A or channel B, and operate the cross fader lever (A/B).

When not using the cross fader, set the CROSS FADER ASSIGN switch to [THRU].

9Use the AUDIO MASTER LEVEL dial to adjust the overall sound volume.

10Use the VIDEO MASTER LEVEL dial to adjust the overall luminance level.

11Use the BALANCE dial to adjust the sound balance between right and left.

13

En

BASIC OPERATIONS

 

MONO/STEREO

MIC1 LEVEL

HI

MIC2 LEVEL

 

HI, LOW

 

MIC

 

CUE

 

MONO SPLIT/STEREO

 

MIXING

BOOTH MONITOR

LEVEL

CH FADER CURVE

Selecting Stereo or Monaural

When the MONO/STEREO switch is set to [MONO], the audio master output becomes a monaural combination of L+R channels.

Microphone Input

1To use a microphone, set the MIC switch to [ON] or [TALK OVER].

When set to [TALK OVER], any time a sound of –15 dB (default setting) or more is input, all sound sources other than the microphone are attenuated by 20 dB (default setting). These default values can be changed in the hardware setup (P. 42).

2Use the MIC 1 LEVEL dial to adjust the sound volume of MIC 1, and use the MIC 2 LEVEL dial to adjust the sound volume of MIC 2.

3Use the microphone equalizer dials (HI, LOW) to adjust the tone of the microphone sound.

The microphone equalizer function operates simultaneously on microphone 1 and 2.

Booth Monitor Output

1Use the BOOTH MONITOR level dial to adjust the sound volume.

The BOOTH MONITOR level dial can be used to adjust the sound volume independently of the AUDIO MASTER LEVEL dial.

Use the hardware setup (P. 42) to set whether or not the microphone sound is to be output to the booth monitor.

Headphones Output

1Use the headphone CUE buttons (channels 1 to 4, MASTER, EFFECT CUE) to select the source.

The selected CUE button lights brightly.

2Set the HEADPHONES (MONO SPLIT/STEREO) switch.

When set to the [MONO SPLIT] position, the sound selected with the headphone CUE button is output to the left channel, and the master sound is output to the right channel (only when MASTER CUE button is set to ON).

When set to the [STEREO] position, the sound selected with the headphone CUE button is output in stereo.

3When [MONO SPLIT] is selected, use the HEADPHONES MIXING dial to adjust the balance of sound between the left channel (sound selected with the headphone CUE button), and the right channel (master sound).

When the HEADPHONES MIXING dial is rotated clockwise (toward [MASTER]), the master output (only when the MASTER CUE button is ON) increases; when rotated counterclockwise (toward [CUE]), the sound selected with the headphone CUE button increases.

CROSS FADER CURVE

4Use the HEADPHONES LEVEL dial to adjust the headphones’ sound volume.

Rotate the HEADPHONES LEVEL dial to adjust the sound level.

When the Effect mode select button (P. 17) is set to [V] mode, effect sounds will not be output even if the EFFECT CUE button is pressed.

FADER CURVE SELECTION

The response of sound volume change to the fader control can be set in three types.

Use the CH FADER CURVE switch to select the desired channel fader response curve.

The sound volume and video level changes as follows:

At the left setting, the curve operates to produce a rapid rise as the channel fader approaches its distant position.

At the right setting, the curve operates to produce an even, neutral rise throughout the channel fader’s movement.

At the middle setting, an intermediate curve is produced, midway between the two curves noted above.

This setting applies equally to channels 1 to 4.

Use the CROSS FADER CURVE switch to select the cross fader curve response.

Sound volume changes as follows:

At the left setting, the curve produces a rapid signal rise. (As soon as the cross fader lever leaves the [A] side, the [B] channel sound is produced.)

At the right setting, the curve operates to produce an even, neutral rise throughout the cross fader’s movement.

At the middle setting, an intermediate curve is produced, midway between the two curves noted above.

This setting produces equal curve effects for both sides A and B.

The video level is as noted above only when the video cross fader’s video mix effect is set to [FADE].

14

En

USING THE VIDEO CONTROL FUNCTIONS

USING THE VIDEO CONTROL FUNCTIONS

Touch the LCD screen to control video functions. Supports video cross fader functions and video channel switch functions.

VIDEO SOLO MODE

HI

FADER AV

SYNC

CROSS FADER

ASSIGN

Cross fader lever (A/B)

OPERATING THE VIDEO CROSS FADER

The video cross fader is used to manipulate video images.

 

 

 

 

2

 

 

1

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

5

 

 

4

5

 

 

 

 

 

 

 

 

1

Channel

Monitors videos from each input channel

 

monitor

(1 through 4).

 

 

 

 

 

Touch the channel monitor to output the

 

 

 

 

video of each channel.

 

 

 

 

 

 

 

2

Video level

Indicates video output level.

 

 

 

 

 

Appears red when FADER AV SYNC is

 

 

 

 

ON, and appears green when FADER AV

 

 

 

 

SYNC is OFF.

 

 

 

 

 

 

3

Video mix effect

Use to select type of video change when

 

button

video cross fader is operated.

 

 

 

 

 

 

 

4

Video Cross

Video cross fader.

 

 

fader

 

 

 

 

 

 

 

5

Transfomer

Outputs video of touched side, regardless

 

button [TRANS]

of position of video cross fader.

 

 

 

 

 

 

 

1Using the CROSS FADER ASSIGN switch, choose either Channel A or Channel B of the cross fader

When assigned to Channel [A], the border of the channel preview monitor appears blue; when assigned to Channel [B], the border of the channel preview monitor appears red. When assigned to [THRU], the border appears gray.

When JPEG is assigned, the [JPEG] indicator will appear at the upper left of the channel monitor.

2Touch a video mix effect button to choose a video mix effect.

The selected button will appear white, and the icon will move as an animation.

For each effect refer to P. 16.

3Operate the video cross fader.

The video will change as video mix effects are being applied.

When FADER AV SYNC is set to ON, the video cross fader section’s [AV SYNC] indicator will appear, and the video cross fader will operate in synchronization with the cross fader. Touching the video cross fader allows you to manipulate the video while you are touching it. Release to return to the same position as the cross fader.

When FADER AV SYNC is set to OFF, the video cross fader section’s [AV SYNC] indicator goes out, and the sound and video are controlled independently. The sound is controlled by the cross fader, and the video by the video cross fader.

When the [TRANS] button is touched, the video corresponding to the touched side will be output regardless of the position of the video cross fader.

When all cross fader assigns are set to [THRU], the video cross fader and [TRANS] button will appear gray, and if assigned, the buttons will function as video cross fader, [TRANS] buttons, with [A] side appearing blue and [B] side appearing red.

OPERATING THE VIDEO CHANNEL SWITCH

The channel monitor functions as a switch to turn that channel’s video ON/OFF.

1Touch the channel monitor.

The touched video output will alternate ON/OFF.

When FADER AV SYNC is set to ON, the video level will be displayed in red. If the video level is not dispayed (channel fader is [0]), touch the channel to output that channel’s video. Or alternately, when the video level is displayed, touching the channel monitor will cause that channel’s video to turn off during the duration the screen is touched.

When FADER AV SYNC is set to OFF, the video level is displayed in green. The channel monitor can be touched to alternate that video output ON/OFF.

15

En

USING THE VIDEO CONTROL FUNCTIONS

OPERATING IN THE VIDEO SOLO MODE

Setting video solo mode to ON allows instantaneous switching to the desired channel’s video.

By combining with the FADER AV SYNC button ON/OFF, a variety of operations is possible.

Whenever the power is first turned ON, the video solo mode is set to OFF by default.

When the video solo mode is ON, the VIDEO SOLO MODE button will flash.

When FADER AV SYNC is ON

When the channel monitor is touched, output instantaneously switches to the video of the touched channel.

When the channel fader begins rising from the [0] position, output instantaneously switches to that channel’s video.

When FADER AV SYNC is OFF

When the channel monitor is touched, output instantaneously switches to the video of the touched channel.

Upon changing the FADER AV SYNC from ON to OFF, the original channel fader position will be maintained until the channel monitor is touched again.

Operation of the video cross fader and [TRANS] button are not supported in the video solo mode.

VIDEO MIX EFFECTS CHART

Video mix effects

Video cross fader

No

Name

Description of the effect

 

 

 

1

FADE

Switches video while mixing.

 

 

 

2

WIPE

Switches video while wiping away.

 

 

 

3

SWITCH

Switches instantaneously (without mixing).

 

 

 

4

CHROMA-B

Switches from the blue component of video on cross fader side [A] to the

 

 

video on side [B].

 

 

 

5

CHROMA-G

Switches from the green component of video on cross fader side [A] to the

 

 

video on side [B].

 

 

 

6

LUMINANCE

Switches from the dark portion of video on cross fader side [A] to the video

 

 

on side [B].

 

 

 

16

En

USING THE EFFECT FUNCTION

USING THE EFFECT FUNCTION

This function applies effects to the selected channel’s sound and video. Effects include BEAT effects, which are applied in linkage to the track’s BPM; TOUCH effects, which control effects by directly touching the screen; and TEXT effects, which display onscreen characters with effects added in rhythm to the track. The UTILITY (MASTER MONITOR) button can be pressed to display the master monitor’s image on the LCD screen.

UTILITY

 

(MASTER MONITOR)

CH SELECT

USB

 

HI

 

 

VIDEO FX

 

PATTERN

 

TAP

 

EFFECT

 

ON/OFF

USING BEAT EFFECTS

BEAT effects can be instantaneously set in-sync with the BPM (Beat Per Minute) of the track, enabling you to apply various effects to the rhythm even during live performances.

When master monitor is off

4

1

2

5

11

6

7

8

9

10

When master monitor is on

3 4

1

2

 

 

 

 

 

 

 

 

 

7

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

6

 

 

 

 

 

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

Effect category

Selects the category of effects you wish to

 

buttons

apply. Select from [BEAT] (red), [TOUCH]

 

 

 

 

 

(blue), and [TEXT] (green).

 

 

 

 

 

 

 

 

 

 

 

 

2

Effect select

Select and touch the desired effect button

 

buttons

from the 12 BEAT effects.

 

 

 

 

 

 

 

 

 

 

 

 

3

MASTER

When master monitor is on, displays

 

monitor

master output.

 

 

 

 

 

 

 

 

 

 

 

 

4

Channel select

Rotate the CH SELECT dial to select the

 

display

channel to which you wish to apply the

 

 

 

 

 

effect.

 

 

 

 

 

 

 

 

 

 

 

 

5

Effect mode

A: Touch to apply the effect to audio only.

 

select buttons

AV: Touch to apply the effect to both

 

 

 

 

 

audio and video.

 

 

 

 

 

V: Touch to apply the effect to video only.

 

 

 

 

 

 

 

 

 

 

 

 

6

Video EFFECT

Monitors effect results.

 

monitor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

Video effect

Rotate the VIDEO FX PATTERN/TEXT

 

pattern display

BANK dial to select the video effect

 

 

 

 

 

pattern. When BEAT effect is enabled, you

 

 

 

 

 

can choose from

 

 

 

 

 

[ORIGINAL]/[INVERSE]/[EDGE]/[HUE].

 

 

 

 

 

 

 

 

 

 

 

 

8

[BPM

Touch to switch the measurement

 

AUTO/TAP]

method of the BPM between AUTO and

 

button

TAP.

 

 

 

 

 

 

 

 

 

 

 

 

9

BPM/parameter

Displays the measured BPM and effect

 

display

parameters.

 

 

 

 

 

 

 

 

 

 

 

 

10

Beat button

Touch to select the multiplication factor

 

 

 

 

 

of the beat calculated from the BPM for

 

 

 

 

 

synchronization of effects.

 

 

 

 

 

 

 

 

 

 

 

 

11

[VISUALIZER]

Allows use of images produced internally

 

button

by the unit.

 

 

 

 

 

 

 

 

 

 

 

 

17

En

USING THE EFFECT FUNCTION

1Touch the [BPM AUTO/TAP] button to select the BPM (=Beat Per Minute) measurement mode.

AUTO: The BPM is automatically measured from the input music signal.

TAP: Tap the TAP button with your finger to manually input the BPM.

Whenever power is first turned ON, [AUTO] is selected by default.

The selected mode ([AUTO]/[TAP]) will appear in the display.

When a BPM cannot be measured automatically, the BPM display in the display will flash.

The measurement range of AUTO mode is BPM=70 to 180.

Depending on the track, the BPM may not be accurately measured. In these cases, use TAP mode to manually enter the BPM.

[Manually entering the BPM using the TAP button]

When the TAP button is tapped to the beat (a quarter note) more than twice, the average length will be set as the BPM.

Pressing the TAP button during [AUTO] mode will switch the BPM measurement mode to [TAP], and the length between the taps will be measured.

When a BPM is set using the TAP button, the multiplication factor will become [1/1] or [4/1] (depending on the effect), and the effect time will be set to either the length of 1 beat (a quarter note) or 4 beats.

Rotate the TIME/PARAMETER dial while pressing the TAP button to set the BPM directly.

Touch the [BPM AUTO/TAP] button to return to [AUTO] mode.

2Touch the effect category button [BEAT].

The [BEAT] button will light brightly, and the icon will move as an animation.

The BEAT effect screen will be displayed.

Whenever power is first turned ON, the [BEAT] effect is selected by default.

3Use the effect select buttons to select an effect type.

The selected button will appear white, and the icon will move as an animation.

For a description of each effect, refer to P. 23.

4Use the CH SELECT dial to select the channel to which you wish to apply the effect.

The selected effect channel display will appear white.

If [MIC] is selected, the audio effect will be applied to both MIC 1 and MIC 2. There will be no effect on the video.

When turning the power ON, [MASTER] will be selected.

5Touch the effect mode select button to select the effect mode.

The selected button will appear white, and the icon will move as an animation.

A: The effect will be applied to the audio only.

AV: The effect will be applied to both the audio and video. V: The effect will be applied to the video only.

• When turning the power ON, [AV] will be selected.

6Touch the beat button to choose the multiplication factor of the beat for synchronization of the effect.

Select the beat number calculated from the BPM.

The selected beat button will be highlighted.

An effect time that corresponds to the multiplication factor of the beat will be automatically set.

[Example] When BPM=120 1/1 = 500 ms

1/2 = 250 ms 2/1 = 1000 ms

7Set the EFFECT ON/OFF button to ON to apply the effect.

Each time the button is pressed it will switch between ON and OFF (whenever power is first turned ON, the setting defaults to OFF).

When effect is ON, the button flashes.

Video effect pattern

Rotate the VIDEO FX PATTERN/TEXT BANK dial to select a video effect pattern for the selected video effect.

For descriptions on the video effect pattern change caused by rotating the VIDEO FX PATTERN/TEXT BANK dial, refer to P. 24.

Parameter 1

Rotate the TIME/PARAMETER dial to adjust temporal parameters of the selected effect.

For descriptions on the changes in parameter 1 caused by turning the TIME/PARAMETER dial, refer to P. 23.

Parameter 2

Rotate the LEVEL/DEPTH dial to adjust quantitative parameters of the selected effect.

For descriptions on the changes in parameter 2 caused by rotating the LEVEL/DEPTH dial, refer to P. 23.

Using the visualizer

This function allows the use of images produced internally by the unit.

1Set [VISUALIZER] button to [ON].

The video effect monitor displays the image.

2Use the effect select buttons to choose a desired image.

3Use the CH SELECT dial to select the desired channel.

The image will move automatically in rhythm to the music’s beat.

In the event no input image is present, the visualizer’s image can be used.

18

En

USING THE EFFECT FUNCTION

USING TOUCH EFFECTS

With TOUCH effects, many effects can be created by touching the video EFFECT performance monitor.

When master monitor is off

1

 

6

7

2

4

 

3

5

When master monitor is on

 

1

 

 

 

 

 

4

 

 

 

 

 

 

 

2

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

Effect select

Select and touch the desired effect button

 

buttons

from the 12 TOUCH effects.

 

 

 

 

 

 

 

 

2

Effect mode

A: Touch to apply the effect to audio only.

 

select buttons

AV: Touch to apply the effect to both

 

 

 

 

 

audio and video.

 

 

 

 

 

V: Touch to apply the effect to video only.

 

 

 

 

 

 

 

 

3

Video EFFECT

Touch here to apply effects to the video

 

performance

image.

 

monitor

 

 

 

 

 

 

 

 

 

 

 

4

Video effect

Rotate the VIDEO FX PATTERN/TEXT

 

pattern display

BANK dial to select the video effect

 

 

 

 

 

pattern. The pattern will differ depending

 

 

 

 

 

on the effect type.

 

 

 

 

 

 

 

 

5

Parameter

Displays the TOUCH effect parameter.

 

display

The parameter will differ depending on

 

 

 

 

 

the effect type

 

 

 

 

 

 

 

 

6

[HOLD] button

When [HOLD] button is set to [ON],

 

 

effects are recorded from the time the

 

 

screen is touched until the finger is

 

 

removed.

 

 

 

7

[VISUALIZER]

Internally creates a video image to which

 

button

TOUCH effects can be applied.

 

 

 

1Touch the effect category button [TOUCH].

The [TOUCH] button will light brightly, and the icon will move as an animation.

The TOUCH effect screen will be displayed.

2Select an effect from the effect select buttons.

The selected button will appear white, and the icon will move as an animation.

For a description of each effect, refer to P. 25.

3Use the CH SELECT dial to select the channel to which you wish to apply the effect.

The selected effect channel display will appear white.

If [MIC] is selected, the audio effect will be applied to both MIC 1 and MIC 2. There will be no effect on the video.

4Touch the effect mode select button to select the effect mode.

The selected button will appear white, and the icon will move as an animation.

A: The effect will be applied to the audio only.

AV: The effect will be applied to both the audio and video. V: The effect will be applied to the video only.

• When turning the power ON, [AV] will be selected.

5Set the EFFECT ON/OFF button to ON to apply the effect.

Each time the button is pressed it will switch between ON and OFF (whenever power is first turned ON, the setting defaults to OFF).

When effect is ON, the button flashes.

6Touch the video effect performance monitor to change the effects.

When [HOLD] button is set to [ON], effects are recorded from the time the screen is touched until the finger is removed (max. 8 sec.), then output repeatedly.

Each time the [HOLD] button is touched it will switch between [ON] and [OFF].

Whenever power is first turned ON, the setting defaults to [OFF].

Pattern

Rotate the VIDEO FX PATTERN/TEXT BANK dial to select a video effect pattern of the selected video effect.

For descriptions of the video pattern changes caused by rotating the VIDEO FX PATTERN/TEXT BANK dial, refer to P. 25.

Parameter 1

Rotate the TIME/PARAMETER dial to adjust the parameters for the selected effect.

For descriptions on the changes in parameter 1 caused by rotating the TIME/PARAMETER dial, refer to P. 25.

Parameter 2

Rotate the LEVEL/DEPTH dial to adjust the quantitative parameters for the selected effect.

For descriptions on the changes in parameter 2 caused by rotating the LEVEL/DEPTH dial, refer to P. 25.

Using the Visualizer

This function allows the use of images produced internally by the unit.

1Set [VISUALIZER] button to [ON].

The video effect performance monitor displays the image.

19

En

USING THE EFFECT FUNCTION

2Use the effect select buttons to choose a desired image.

3Touch the image to apply changes.

4Use the CH SELECT dial to select the desired channel.

In the event no input image is present, the visualizer’s image can be used.

USING TEXT EFFECTS

TEXT effects can be instantaneously set in-sync with the BPM (Beat Per Minute) of the track, enabling you to apply various TEXT effects to the rhythm.

When master monitor is off

1

2

3

 

6

4

5

3

 

7

8

9

When master monitor is on

 

1

 

 

 

3

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

6

 

 

4

 

 

 

 

 

 

 

5

 

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

9

 

 

 

 

 

 

 

 

 

1

Effect select

Select and touch the desired effect button

 

buttons

from the 6 TEXT effects.

 

 

 

 

 

 

 

 

2

[TEXT BANK]

Touch the text button of your choice from

 

buttons

the 6 texts.

 

 

 

 

 

 

 

 

3

TEXT BANK

Rotate the VIDEO FX PATTERN/TEXT

 

display

BANK dial to select a TEXT BANK from

 

 

 

 

the 10 available.

 

 

 

 

 

 

 

 

4

Effect mode

A: Touch to apply the effect to audio only.

 

select button

AV: Touch to apply the effect to both

 

 

 

 

audio and video.

 

 

 

 

V: Touch to apply the effect to video only.

 

 

 

 

 

 

 

 

5

Video EFFECT

Monitors the TEXT effects.

 

monitor

 

 

 

 

6

[TEXT EDIT]

Touch to edit the text of the selected

 

button

[TEXT BANK] button.

 

 

 

7

[BPM

Touch to switch the measurement

 

AUTO/TAP]

method of the BPM between AUTO and

 

button

TAP. Pressing the TAP button will also

 

 

switch this to TAP.

 

 

 

8

Parameter

Displays the measured BPM and effect

 

display

parameters.

 

 

 

9

Beat

Touch to select the multiplication factor

 

button/beat

of the beat calculated from the BPM for

 

display

synchronization of effects.

 

 

 

1Touch the [BPM AUTO/TAP] button to select the BPM (=Beat Per Minute) measurement mode.

AUTO: The BPM is automatically measured from the input music signal.

TAP: Tap the TAP button with your finger to manually input the BPM.

Whenever power is first turned ON, [AUTO] is selected by default.

The selected mode ([AUTO]/[TAP]) will appear in the display.

When a BPM cannot be measured automatically, the BPM display in the display will flash.

The measurement range of AUTO mode is BPM=70 to 180.

Depending on the track, the BPM may not be accurately measured. In these cases, use TAP mode to manually input the BPM.

2Touch the effect category button [TEXT].

The [TEXT] button will light brightly, and the icon will move as an animation.

The TEXT effect screen will be displayed.

3Select a text effect using the effect select buttons.

The selected button will appear white, and the icon will move as an animation.

For a description of each effect, refer to P. 30.

4Choose a text from TEXT BANK.

Rotate the VIDEO FX PATTERN/TEXT BANK dial to select TEXT BANK and touch the [TEXT BANK] button to select the text.

The selected button will appear white.

5Use the CH SELECT dial to select the channel to which you wish to apply the effect.

The selected effect channel display will be highlighted.

TEXT effects are not supported when [MIC] is selected. Effects are applied to audio only.

6Touch the effect mode select buttons to choose the effect mode.

The selected button will be highlighted and an animation will appear.

A: An effect will be applied to the audio only.

AV: An effect will be applied to both the audio and video. V: An effect will be applied to the video only.

• When turning the power ON, [AV] will be selected.

20

En

USING THE EFFECT FUNCTION

7Touch the beat button to choose the multiplication factor of the beat for synchronization of the effect.

Select the beat number calculated from the BPM.

The selected beat button will be highlighted.

An effect time that corresponds to the multiplication factor of the beat will be automatically set.

[Example] When BPM=120 1/1 = 500 ms

1/2 = 250 ms 2/1 = 1000 ms

8Set the effect EFFECT ON/OFF button to ON to apply the effect.

Each time the button is pressed it will switch between ON and OFF (whenever power is first turned ON, the setting defaults to OFF).

When effect is ON, the button is flashes.

Text bank

Rotate the VIDEO FX PATTERN/TEXT BANK dial to select a TEXT

BANK.

Parameter 1

Rotate the TIME/PARAMETER dial to adjust temporal parameters of the selected effect.

For descriptions on the changes in parameter 1 caused by rotating the TIME/PARAMETER dial, refer to P. 30.

Parameter 2

Rotate the LEVEL/DEPTH dial to adjust quantitative parameters of the selected effect.

For descriptions on the changes in parameter 2 caused by rotating the LEVEL/DEPTH dial, refer to P. 30.

21

En

USING THE EFFECT FUNCTION

EDITING TEXT

 

 

 

 

 

 

5

4

3

2

1

 

 

 

 

 

6

 

 

 

 

 

7

 

 

 

 

13

8

12

10 118

 

16

9

 

17

 

156

186

14

 

 

 

19

20

 

 

 

 

 

1

[EXIT] button

Touch to exit the TEXT EDIT screen and

 

 

return to the TEXT effect screen.

 

 

 

2

[FACTORYTEXT]

Touch to load factory text data.

 

button

 

 

 

 

3

[LOAD] button

Touch to load text data from an SD card.

 

 

 

4

[SAVE] button

Text entered into the TEXT BANK can be

 

 

saved to an SD card.

 

 

 

5

TEXT BANK

Rotate the VIDEO FX PATTERN/TEXT

 

display

BANK dial to select a TEXT BANK you

 

 

wish to edit from the 10 available.

 

 

 

6

[TEXT BANK]

Entered text can be stored.

 

buttons

Also touch to call up stored text.

 

 

 

7

[FONT] button

Touch to change the font of the text. The

 

 

font alternates each time the button is

 

 

touched.

 

 

 

8

[COLOR] button

Touch to change the color of the entered

 

 

text. The color alternates each time the

 

 

button is touched.

 

 

 

9

[SIZE] button

Touch to change the size of the entered

 

 

text. The size alternates each time the

 

 

button is touched.

 

 

 

10

Character

Touch to change the character of the

 

button

input text. The character alternates each

 

 

time the button is touched.

 

 

 

11

Justify button

Touch to justify the text to the left, center,

 

 

or right. The justification alternates each

 

 

time the button is touched.

 

 

 

12

TEXT BOX

Displays the entered text.

 

 

 

13

TEXT effect

The TEXT effect is monitored here.

 

monitor

 

 

 

 

14

Text type select

Use to change the text type.

 

buttons

 

 

 

 

15

[CAPS] / [PAGE]

Touch to alternate between upper and

 

button

lower case, and between page display for

 

 

page 1 and 2.

 

 

 

16

Cursor move

Touch to move the cursor.

 

button (<, >)

 

 

 

 

17

Line break

Touch to create a line break in the text.

 

button (LF)

 

 

 

 

22

18

[DELETE] button

Touch to delete entered text. The text

 

 

behind the cursor will be deleted. Hold

 

 

depressed to delete all text.

 

 

 

19

[BACK SPACE]

Touch to delete entered text. The text

 

button

before the cursor will be deleted.

 

 

 

20

Text input

Touch to enter text.

 

button

 

 

 

 

1Touch the [TEXT EDIT] button.

The TEXT EDIT screen appears.

Touch the [EXIT] button to return to the TEXT effect screen.

2Rotate the VIDEO FX PATTERN/TEXT BANK dial to select TEXT BANK and touch the [TEXT BANK] button to select the text you wish to edit.

The selected button will be highlighted.

If the [TEXT BANK] button is touched, the text will appear in the TEXT BOX.

3Touch the [FONT] button to change the font of the text.

The font will change each time the button is touched. The font alternates between six different fonts.

4Touch the [COLOR] button to change the text color.

The color changes each time the button is touched. The color alternates between eight different colors.

5Touch the [SIZE] button to change the text size.

The size changes each time the button is touched. The size alternates between four different sizes.

Under some conditions, [AUTO SIZE] and [BIG] settings will produce the same sized images.

6Touch the character button to change the text character.

The character changes each time the button is touched. The character alternates between five different characters.

For the character, refer to P. 30

7Touch the justify button to change the justification of the text.

The justification changes each time the button is touched. The justification alternates between three different justifications.

8Touch the text type select button to change the text type of the text.

The selected button will be highlighted.

Touch the caps button to switch between upper case and lower case.

9Touch the text input button to enter text.

The entered text will appear in the text box.

A maximum of 50 letters can be entered.

10Touch the [EXIT] button to finish text edit.

Text can be edited in real time.

When power is turned off, settings return to default values.

SAVE/LOAD

TEXT BANK can be saved to SD card. TEXT BANK saved on an SD card can also be loaded.

The [LOAD] button and [SAVE] button will not be displayed if no SD card is detected.

USB keyboard

A USB keyboard can be connected to the USB port to allow text to be entered directly from the keyboard.

For the encoding setting of the keyboard, refer to P. 41.

DISPLAYING/HIDING THE MASTER MONITOR

1Press the UTILITY (MASTER MONITOR) button.

Each time the button is pressed, the master monitor display alternates ON/OFF.

When the master monitor is set to display, the master monitor will appear in the center display, and the content of the master output video can be observed.

Whenever power is first turned ON, the master monitor defaults to OFF.

En

USING THE EFFECT FUNCTION

EFFECT LIST

BEAT effects (*1)

 

 

 

 

Parameter 1

 

Parameter 2

 

 

Description of the effect

Beat button parameter

(TIME/PARAMETER)

(LEVEL/DEPTH)

 

 

 

 

 

 

 

 

 

 

 

Description

 

Description

 

 

 

 

 

 

 

DELAY1. (*7)

VIDEOAUDIO

Repeat sound will be output

For the time of 1 BPM beat, a 1/4 to

Sets delay time.

1 to 4 000

Sets the balance between the

once to the beat.

8/1 delay time will be set.

 

(ms) (*3)

video.

 

 

 

original sound and the delay

 

 

 

 

 

 

sound.

 

 

Repeat video will be output

For the time of 1 BPM beat, a 1/4 to

Sets delay time.

 

Sets the balance between the

 

 

once to the beat.

8/1 delay time will be set.

 

 

original video and the delay

 

 

 

 

 

 

 

 

 

Sound will be output several

For the time of 1 BPM beat, a 1/4 to

Sets delay time.

1 to 4 000

Sets the balance between the

 

 

times to the beat as it

8/1 delay time will be set.

 

(ms) (*3)

original sound and the echo

 

 

attenuates.

 

 

 

sound.

 

 

 

 

 

 

 

ECHO2.(*7)

AUDIOVIDEO(*2)

Video will be output several

For the time of 1 BPM beat, a 1/4 to

Sets delay time.

 

Sets the balance between the

attenuates.

8/1 delay time will be set.

 

 

video.

 

 

times to the beat as it

 

 

original video and the echo

 

 

 

 

 

 

 

PAN3.

VIDEOAUDIO

Sound sways right and left to

For the time of 1 BPM beat, a 1/8 to

Sets effect time.

10 to 16 000

Sets the balance between the

the beat.

8/1 sway time (for audio) will be set.

 

(ms)

video.

 

 

 

original sound and the effect

 

 

 

 

 

 

sound.

 

 

Video sways right and left to

For the time of 1 BPM beat, a 1/8 to

Sets effect time.

 

Sets the balance between the

 

 

the beat.

8/1 sway time (for video) will be set.

 

 

original video and the effect

 

 

 

 

 

 

 

TRANS4.

VIDEOAUDIO

Sound is cut off to the beat.

For the time of 1 BPM beat, a 1/8 to

Sets effect time.

10 to 16 000

Sets the balance between the

 

8/1 cut time will be set.

 

(ms) (*4)

video.

 

 

 

 

original sound and the effect

 

 

 

 

 

 

sound.

 

 

Video is cut off to the beat.

For the time of 1 BPM beat, a 1/8 to

Sets effect time.

 

Sets the balance between the

 

 

 

8/1 cut time will be set.

 

 

original video and the effect

 

 

 

 

 

 

 

FILTER

AUDIO

Dramatically changes the

For the time of 1 BPM beat, a 1/2 to

Sets the cycle in

10 to 32 000

The effect is enhanced as the

sound tone by moving the

32/1 time will be set for the cycle in

which the cutoff

(ms)

dial is rotated to the right.

 

 

 

 

cutoff frequency of the filter

which the cutoff frequency is moved.

frequency moves.

 

 

 

 

in rhythm to the beat.

 

 

 

 

 

 

 

 

 

 

 

5.

VIDEO

Outputs an opaque video to

For the time of 1 BPM beat, a 1/2 to

Sets the cycle in

 

Sets the balance between the

the beat.

which the opaque filter is applied.

filter is applied.

 

video.

 

 

32/1 time will be set for the cycle in

which the opaque

 

original video and the effect

 

 

 

 

 

 

 

 

 

One Flanger effect cycle is

For the time of 1 BPM beat, a 1/2 to

Sets the interval in

10 to 32 000

The effect is enhanced as the

FLANGER

AUDIO

quickly and simply created to

32/1 time will be set for the interval in

which the flanger

(ms)

dial is rotated to the right. Only

the beat.

which the flanger effect is moved.

effect moves.

 

the original sound will be

 

 

 

 

 

 

 

 

 

output when the dial is rotated

 

 

 

 

 

 

completely to the left.

 

 

 

 

 

 

 

6.

VIDEO

An enlarged image of the

For the time of 1 BPM beat, 1/2 to 32/1

Sets the interval in

 

Sets the balance between the

to the beat.

which the effect screen appears.

screen appears.

 

video.

 

 

contour of the video is output

time will be set for the interval in

which the effect

 

original video and the effect

 

 

 

 

 

 

 

 

 

One cycle of phaser effect is

For the time of 1 BPM beat, a 1/2 to

Sets the interval in

10 to 32 000

The effect is enhanced as the

PHASER

AUDIO

quickly and simply created to

32/1 time will be set for the interval in

which the phaser

(ms)

dial is rotated to the right. Only

the beat.

which the phaser effect is moved.

effect moves.

 

the original sound will be

 

 

 

 

 

 

 

 

 

output when the dial is rotated

 

 

 

 

 

 

completely to the left.

 

 

 

 

 

 

 

7.

VIDEO

An rotating image of the

For the time of 1 BPM beat, 1/2 to 32/1

Sets the interval in

 

Sets the balance between the

output to the beat.

which the effect screen appears.

screen appears.

 

video.

 

 

contour of the video will be

time will be set for the interval in

which the effect

 

original video and the effect

 

 

 

 

 

 

 

 

(*2)

Reverberation effect.

Sets the degree of the reverberation

Sets the degree of

1 to 100 (%)

Sets the balance between the

 

 

from between 10 % and 90 %.

the reverberation.

 

original sound and the effect

REVERB8.

VIDEOAUDIO

 

 

 

 

 

 

video.

 

 

 

 

 

 

sound.

 

 

Video with an afterimage will

Sets the degree of the afterimage

Sets the degree of

 

Sets the balance between the

 

 

be output.

from between 10 % and 90 %.

the afterimage.

 

original video and the effect

 

 

 

 

 

 

 

23

En

USING THE EFFECT FUNCTION

 

 

 

 

Parameter 1

 

Parameter 2

 

 

Description of the effect

Beat button parameter

(TIME/PARAMETER)

(LEVEL/DEPTH)

 

 

 

 

 

 

 

 

 

 

 

Description

 

Description

 

 

 

 

 

 

 

ROBOT9.

AUDIOVIDEO

The input sound is given an

Sets the effect of the robotic sound

Sets the effect of

–100 to 100

The effect is enhanced as the

effect like that created by a

pitch between –100 % and 100 %

the robotic sound

(%)

dial is rotated to the right.

 

 

 

 

robot.

 

pitch.

 

 

 

 

 

 

 

 

 

 

 

A robot-like video is created

Sets the ratio of the mix between the

Sets the ratio of the

 

The up and down swinging is

 

 

by swinging the image up

mosaic size and the original video

mix between the

 

enhanced as the dial is rotated

 

 

and down and applying a

between –100 % and 100 %

mosaic size and

 

to the right.

 

 

mosaic filter.

 

the original video.

 

 

 

 

 

 

 

 

 

CHORUS10.

AUDIOVIDEO

An expansive sound as if

For the time of 1 BPM beat, a 1/2 to

Sets the interval in

10 to 32 000

Sets the balance between the

various sources were

32/1 time will be set for the interval of

which the chorus

(ms)

original sound and the chorus

 

 

 

 

emitting the same sound

the vibrato of the chorus sound.

sound is

 

sound.

 

 

pitch.

 

modulated.

 

 

 

 

 

 

 

 

 

 

 

A video divided into RGB

For the time of 1 BPM beat, a 1/2 to

Sets the interval in

 

Sets the balance between the

 

 

components is output to the

32/1 time will be set for the interval in

which the image

 

original video and the effect

 

 

beat.

which the image returns to the

returns to its

 

video.

 

 

 

original.

original.

 

 

 

 

 

 

 

 

 

 

(*2)

Records and repetitively

For the time of 1 BPM beat, a 1/8 to

Sets effect time.

10 to 4 000

Sets the balance between the

(*5,ROLL7)

outputs the beat sound.

8/1 effect time is be set.

 

(ms) (*3)

original sound and the ROLL

AUDIO(*6)

 

 

 

 

 

sound.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Records and repetitively

For the time of 1 BPM beat, a 1/8 to

Sets the time in

 

Sets the balance between the

11.

VIDEO

outputs the beat image.

8/1 effect time is be set.

which the image is

 

original video and the effect

 

 

repeated.

 

video.

 

 

 

 

 

 

 

 

 

 

 

 

(*5,ROLL7)

AUDIO(*2)

Records and repetitively

For the time of 1 BPM beat, a 1/8 to

Sets effect time.

10 to 4 000

Sets the balance between the

outputs the beat sound in

8/1 effect time is be set.

 

(ms) (*3)

original sound and the ROLL

 

 

 

 

 

reverse.

 

 

 

sound.

 

 

 

 

 

 

 

REVERSE12.

(*6)VIDEO

Records and repetitively

For the time of 1 BPM beat, a 1/8 to

Sets the time in

 

Sets the balance between the

outputs the beat video in

8/1 effect time is be set.

which the image is

 

original video and the effect

 

 

 

 

 

reverse.

 

repeated.

 

video.

 

 

 

 

 

 

 

(*1) When the effect channel display shows [CFA], [CFB], or [MST]/[MASTER], even if the effect monitor is turned ON, if the selected channel’s sound is not output to the master output, the effect sound will not be heard.

(*2) If effect is set to OFF, the effect sound will not be audible when monitoring effects. (*3) The shortest video effect time value is: For NTSC, 66 ms. For PAL, 80 ms.

(*4) The shortest video effect time value is: For NTSC, 99 ms. For PAL, 119 ms.

(*5) When the visualizer function is switched from ON to OFF, the visualizer’s image will be subjected to ROLL in the sampling state. (*6) When effects are set to OFF, images with effects applied will not be displayed on the video effects monitor.

(*7) Effects will be disabled in all channels if copy-protected contents are input to any channel. In other words, in this case effects will not function even if non-copy-protected contents are input to the channel to which you wish to apply effects.

Video effect pattern

No.

Name

Description of video effect pattern

 

 

 

1

ORIGINAL

Original image without video effect pattern.

 

 

 

2

INVERSE

Inverts brightness.

 

 

 

3

EDGE

Creates a border around the image.

 

 

 

4

HUE

Changes the color (except black and white).

 

 

 

24

En

USING THE EFFECT FUNCTION

TOUCH effects (*1)

 

 

 

 

 

Parameter 1

 

Parameter 2

 

 

 

Description of the effect

Description of the effect when

(TIME/PARAMETER)

(LEVEL/DEPTH)

 

 

 

 

touched

 

 

 

 

 

 

 

Description

 

Description

 

 

 

 

 

 

 

 

 

AUDIO

Phasing effect is applied

Touch the screen toward the right to

Rotate the dial

 

 

 

proportional to the volume of

enhance the effect. Touch toward

 

 

clockwise to enhance

 

 

 

the input bass sound.

the left to reduce the effect.

 

 

the effect. When dial is

 

 

 

 

 

 

 

rotated fully

 

 

 

 

 

 

 

counterclockwise, only

 

 

 

 

 

 

 

original sound is

(*2)

 

 

 

 

 

 

output.

 

 

 

 

 

 

 

VIDEO

Outputs an effect in which ripples spread from the point being touched.

 

 

RIPPLE1.

 

 

 

 

 

 

 

 

 

 

PATTERN1

Continuously outputs five

touched.

the ripples.

1 to 10

video and the effect

 

 

Outputs an effect in which ripples

Sets the strength

Sets the balance

 

 

 

ripples.

spread from the point being

(the amplitude) of

 

between the original

 

 

PATTERN2

Continuously outputs seven

 

 

 

video.

 

 

 

ripple designs (shifts in the

 

 

 

 

 

 

 

 

 

 

 

 

 

brightness).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN3

Outputs curtain-like ripples.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN4

Continuously outputs three

 

 

 

 

 

 

 

large ripples.

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO

Outputs a reverberation effect.

Touch the screen toward the right to

Sets the balance

 

(*4)

 

enhance the effect. Touch toward

 

 

between the original

 

 

 

 

the left to reduce the effect.

 

 

sound and the effect

 

 

 

 

 

 

 

sound.

 

 

 

 

 

 

 

 

VIDEO

Outputs a magnified or reduced

-size image.

 

 

 

 

 

 

 

 

 

 

 

(*2)

 

PATTERN1

Outputs an image zoomed in on

Outputs an image zoomed in on the

Sets the scale of

1 to 10

Sets the balance

 

 

the point touched.

point touched.

magnification/redu

 

between the original

ZOOM2.

 

 

 

 

 

touched.

 

ction.

 

video and the effect

 

 

PATTERN2

Outputs an image stretched

Outputs an image stretched

 

 

 

 

 

video.

 

 

 

horizontally from the point

horizontally from the point touched.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN3

Outputs an image stretched

Outputs an image stretched

 

 

 

 

 

 

vertically from the point

vertically from the point touched.

 

 

 

 

 

 

touched.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN4

Outputs an image zoomed out

Outputs an image zoomed out from

 

 

 

 

 

 

from the point touched.

the point touched.

 

 

 

 

 

 

 

 

 

 

 

AUDIO

Outputs a sound with the cutoff

frequency of the filter changed.

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN1

Outputs a sound through a low-

Touch the screen toward the right to

 

 

 

pass filter.

enhance the effect. Touch toward

 

 

 

 

 

 

 

the left to reduce the effect.

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN2

Outputs a sound through a

Touch the screen toward the right to

 

 

 

 

high-pass filter.

enhance the effect. Touch toward

 

 

 

 

 

 

 

the left to reduce the effect.

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN3

Outputs a sound through a

Touch the screen toward the right to

 

 

 

 

band-pass filter.

enhance the effect. Touch toward

 

 

 

 

 

 

 

the left to reduce the effect.

 

 

 

 

 

 

 

 

 

 

 

(*2)

 

PATTERN4

Outputs a sound through a

Touch the screen toward the right to

 

 

 

notch filter.

enhance the effect. Touch toward

 

 

 

BLUR3.

 

 

 

the left to reduce the effect.

 

 

 

 

 

 

 

 

 

 

 

PATTERN1

Outputs an image with blur

Touch more toward the right to

Sets color when

1 to 10 Sets the balance

 

VIDEO

Outputs a blurred image.

 

 

 

 

 

 

 

toward the left side.

enhance the blurred effect on the left

blur effect is

 

between the original

 

 

 

 

side.

applied.

 

video and the effect

 

 

 

 

 

 

 

video.

 

 

PATTERN2

Outputs an image with blur

Touch more toward the right to

 

 

 

 

 

 

 

 

 

 

toward the right side.

enhance the blurred effect on the

 

 

 

 

 

 

 

right side.

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN3

Outputs an image with blur

Touch more toward the right to

 

 

 

 

 

 

toward the bottom side.

enhance the blurred effect on the

 

 

 

 

 

 

 

bottom side.

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN4

Outputs an image with blur

Touch more toward the right to

 

 

 

 

 

 

toward the top side.

enhance the out-of-focus effect on

 

 

 

 

 

 

 

the top side.

 

 

 

 

 

 

 

 

 

 

 

25

En

USING THE EFFECT FUNCTION

 

 

 

 

 

Parameter 1

 

Parameter 2

 

 

 

Description of the effect

Description of the effect when

(TIME/PARAMETER)

(LEVEL/DEPTH)

 

 

 

 

touched

 

 

 

 

 

 

 

Description

 

Description

 

 

 

 

 

 

 

 

 

AUDIO

Outputs a phaser effect with

Touch more toward the right to

Sets the balance

 

(*4)

reverberation.

increase the length of the phaser

 

 

between the original

 

 

 

 

effect cycle. Touch toward the left for

 

 

sound and the effect

 

 

 

 

shorter cycle length.

 

 

sound.

 

 

 

 

 

 

 

 

 

VIDEO

Outputs an image with a warping effect.

 

 

 

(*2)

 

 

 

 

 

 

 

 

PATTERN1

Outputs an image in which the

The warp effect is applied centering

Sets the area in

1 to 10

Sets the balance

DISTORTION

 

 

screen warps with the

on the touched point. The longer you

which the effect is

 

between the original

 

 

appearance of paint mixed with

touch the screen, the stronger the

applied.

 

video and the effect

 

 

 

water.

effect becomes.

 

 

video.

 

 

 

 

 

 

 

 

 

 

PATTERN2

Outputs an image with effect

 

 

 

 

 

 

 

applied like pixelation distortion

 

 

 

 

4.

 

 

from the point the screen is

 

 

 

 

 

 

touched.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN3

Outputs an image with

 

 

 

 

 

 

 

fragmented warp.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN4

Outputs an image with spiral

 

 

 

 

 

 

 

warp.

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO

Modulates the input sound. The

Touch the screen toward the right to

Sets the balance

 

 

 

bass sound has a metallic

enhance the effect. Touch toward

 

 

between the original

 

 

 

quality.

the left to reduce the effect.

 

 

sound and the effect

 

 

 

 

 

 

 

sound.

 

 

 

 

 

 

 

 

VIDEO

Outputs an images lined in blocks.

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN1

Outputs an image in which the

Outputs an image in which the

Sets the number of

1 to 10

Sets the balance

 

 

 

touched block stretches and

touched block stretches and shrinks

partitions of the

 

between the original

BLOCK

 

PATTERN2

shrinks in the horizontal and

in the horizontal and vertical

blocks.

 

video and the effect

 

Outputs an image in which the

Outputs an image in which the

 

 

video.

 

 

 

vertical direction.

direction.

 

 

5.

 

 

touched block stretches and

touched block stretches and shrinks

 

 

 

 

 

 

 

 

 

 

 

 

shrinks in the horizontal

in the horizontal direction.

 

 

 

 

 

 

direction.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN3

Outputs an image in which the

Outputs an image in which the

 

 

 

 

 

 

touched block stretches and

touched block stretches and shrinks

 

 

 

 

 

 

shrinks in the vertical direction.

in the vertical direction.

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN4

Outputs an image in which the

Outputs an image in which the

 

 

 

 

 

 

touched block changes color.

touched block changes color.

 

 

 

 

 

 

 

 

 

 

 

AUDIO

Outputs audio as if the input

Touch the screen toward the right to

Rotate the dial

 

 

 

sound has been crushed.

enhance the effect. Touch toward

 

 

clockwise to enhance

 

 

 

 

the left to reduce the effect.

 

 

the effect. When dial is

 

 

 

 

 

 

 

rotated fully

 

 

 

 

 

 

 

counterclockwise, only

 

 

 

 

 

 

 

original sound is

RADIATION6.

 

 

 

 

 

 

output.

 

 

 

 

 

 

 

VIDEO

Outputs an image with a radial concentric effect.

 

 

video and the effect

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN1

Outputs an image that appears

The touched location will have the

Sets the color.

1 to 10

Sets the balance

 

 

 

like a light shining from behind.

central coordinates of the effect.

 

 

between the original

 

 

 

 

 

 

 

 

 

 

PATTERN2

Outputs an image that spreads

 

Sets the opening of

 

video.

 

 

 

radially.

 

the center.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN3

Outputs an image of circles

 

Sets the opening of

 

 

 

 

 

spreading concentrically.

 

the center.

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN4

Outputs an image combining

 

Sets the opening of

 

 

 

 

 

PATTERN 2 and PATTERN 3.

 

the center.

 

 

 

 

 

 

 

 

 

 

26

En

USING THE EFFECT FUNCTION

 

AUDIO

Outputs the input sound as if it

Touch more toward the right to

Rotate the dial

 

 

 

were being made by a robot.

increase the pitch. Touch toward the

 

 

clockwise to enhance

 

 

 

 

left to lower the pitch.

 

 

the effect. When dial is

 

 

 

 

 

 

 

rotated fully

 

 

 

 

 

 

 

counterclockwise, only

 

 

 

 

 

 

 

original sound is

 

 

 

 

 

 

 

output.

 

 

 

 

 

 

 

 

 

VIDEO

Outputs a kaleidoscope-like effect.

 

 

 

KALEIDO

 

 

 

 

 

 

 

 

PATTERN1

Outputs an image circularly

When the original image is touched

Sets the center

1 to 10

Sets the balance

 

 

 

dividing the screen from the

and moved, the screen is divided

angle of the image.

 

between the original

 

 

 

center of the screen.

circularly and output.

 

 

video and the effect

 

 

 

 

 

 

 

video.

7.

 

PATTERN2

Outputs an image horizontally

When the original image is touched

Sets the height of

 

 

 

 

 

 

 

dividing the screen (vertically

and moved, the screen is divided

the image.

 

 

 

 

 

stacked).

horizontally (vertically stacked).

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN3

Outputs an image vertically

When the original image is touched

Sets the width of

 

 

 

 

 

dividing the screen (arranged

and moved, the screen is divided

the image.

 

 

 

 

 

horizontally).

vertically (arranged horizontally).

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN4

Outputs an image divided

When the image is touched and

Sets the width and

 

 

 

 

 

horizontally and vertically.

moved, the screen is divided

height of the

 

 

 

 

 

 

horizontally and vertically.

image.

 

 

 

 

 

 

 

 

 

 

AUDIO

Produces an effect that lowers

Touch the screen toward the right to

Sets the balance

 

 

 

the pitch of the input sound.

enhance the effect. Touch toward

 

 

between the original

 

 

 

 

the left to reduce the effect.

 

 

sound and the effect

 

 

 

 

 

 

 

sound.

 

 

 

 

 

 

 

 

VIDEO

Outputs image with a lens-like

effect.

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN1

Outputs image with a lens-like

The lens moves to the location that is

Sets the size of the

1 to 10

Sets the balance

LENS

 

 

effect.

touched.

lens.

 

between the original

 

 

 

 

 

 

video.

 

 

PATTERN2

Outputs image with a lens-like

The lens moves to the location that is

 

 

video and the effect

8.

 

 

effect.

touched.

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN3

Outputs image with a lens-like

The lens moves to the location that is

 

 

 

 

 

 

effect.

touched, and the image within the

 

 

 

 

 

 

 

lens also moves in accordance with

 

 

 

 

 

 

 

the amount of lens movement.

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN4

Inverts the luminance

The lens moves to the location that is

 

 

 

 

 

 

components, and outputs the

touched.

 

 

 

 

 

 

image with a lens-like effect.

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO

Produces phaser effect. By

Touch the screen toward the right to

Rotate the dial

 

 

 

moving the touched position

enhance the effect. Touch toward

 

 

clockwise to enhance

 

 

 

between left and right, the

the left to reduce the effect.

 

 

the effect. When dial is

 

 

 

volume of the effect changes.

 

 

 

rotated fully

 

 

 

 

 

 

 

counterclockwise, only

 

 

 

 

 

 

 

original sound is

 

 

 

 

 

 

 

output.

 

 

 

 

 

 

 

 

VIDEO

Outputs an image formulated as

a cube.

 

 

 

CUBE9.

 

 

 

 

 

 

 

 

PATTERN2

Outputs an image of a

Moves to the touched position.

Sets the size of the

1 to 10

video and the effect

 

 

PATTERN1

Outputs an image of the cube

Sets the balance

 

 

 

rotating.

 

object.

 

between the original

 

 

 

bottomless pyramid prism

 

 

 

video.

 

 

 

 

 

 

 

 

 

 

rotating.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN3

Outputs an image of a

 

 

 

 

 

 

 

bottomless pentagon prism

 

 

 

 

 

 

 

rotating.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN4

Outputs an image of a

 

 

 

 

 

 

 

bottomless heptagon prism

 

 

 

 

 

 

 

rotating.

 

 

 

 

 

 

 

 

 

 

 

 

27

En

USING THE EFFECT FUNCTION

 

 

 

 

 

Parameter 1

 

Parameter 2

 

 

 

Description of the effect

Description of the effect when

(TIME/PARAMETER)

(LEVEL/DEPTH)

 

 

 

 

touched

 

 

 

 

 

 

 

Description

 

Description

 

 

 

 

 

 

 

 

 

AUDIO

Flanger effect is applied. Move

Touch more toward the right to

Rotate the dial

 

 

 

finger on touch panel to right-

lengthen the cycle of the flanger

 

 

clockwise to enhance

 

 

 

left to change effect volume.

effect. Touch toward the left for

 

 

the effect. When dial is

 

 

 

 

shorter effect cycle.

 

 

rotated fully

 

 

 

 

 

 

 

counterclockwise, only

 

 

 

 

 

 

 

original sound is

 

 

 

 

 

 

 

output.

 

 

 

 

 

 

 

 

 

VIDEO

Outputs an image with a twisting

rotational effect.

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN1

Outputs an image in which the

The image rotates when you touch

Sets the twisting

1 to 10

Sets the balance

 

 

 

screen twists and rotates.

and drag your finger in a circular

speed.

 

between the original

 

 

 

 

motion around the center of the

 

 

video and the effect

 

 

 

 

screen.

 

 

video.

 

 

 

 

 

 

 

When enlarged more

 

 

 

 

 

 

 

than the center, the

 

 

 

 

 

 

 

rotating speed

 

 

 

 

 

 

 

increases.

 

 

 

 

 

 

 

 

 

 

PATTERN2

Outputs an image where the

The image rotates when you touch

Set the number of

 

Sets the balance

 

 

 

screen is divided and twisted

and drag your finger in a circular

divisions.

 

between the original

 

 

 

individually.

motion around the center of the

 

 

video and the effect

TWIST

 

 

 

screen.

 

 

video.

 

 

 

 

 

 

than the center, the

 

 

 

 

 

 

 

When enlarged more

10.

 

 

 

 

 

 

rotating speed

 

 

 

 

 

 

increases.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN3

As in PATTERN2, the screen

The block of the touched location

Set the number of

 

Sets the balance

 

 

 

image is divided, and in

will stretch. While touching, the

divisions.

 

between the original

 

 

 

proportion to the audio level,

stretching and shrinking

 

 

video and the effect

 

 

 

the image is stretched and

correspondent to the audio level will

 

 

video.

 

 

 

compressed like a graphic

stop.

 

 

When enlarged more

 

 

 

equalizer effect.

 

 

 

than the center, the

 

 

 

 

 

 

 

shrinking speed

 

 

 

 

 

 

 

decreases, and as MAX

 

 

 

 

 

 

 

is approached,

 

 

 

 

 

 

 

changes to the reverse,

 

 

 

 

 

 

 

stretching operation.

 

 

 

 

 

 

 

 

 

 

PATTERN4

Outputs an image where the

The image rotates when you touch

Sets the twisting

 

Sets the balance

 

 

 

screen is twisted and an

and drag your finger in a circular

speed.

 

between the original

 

 

 

afterimage is left.

motion around the center of the

 

 

video and the effect

 

 

 

 

screen.

 

 

video.

 

 

 

 

 

 

 

When enlarged more

 

 

 

 

 

 

 

than the center, the

 

 

 

 

 

 

 

rotating speed

 

 

 

 

 

 

 

increases.

 

 

 

 

 

 

 

 

AUDIO

Outputs a sound with the cutoff

Touch the screen toward the right to

Rotate dial clockwise to

 

 

 

frequency of the filter changed.

enhance the effect. Touch toward

 

 

enhance effect.

 

 

 

 

the left to reduce the effect.

 

 

 

 

 

 

 

 

 

 

 

VIDEO

Outputs image with a spotlight

effect.

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN1

Outputs image with a spotlight

Outputs an image with a spotlight of

Sets the interval in

1 to 10

Sets the balance

(*3)

 

 

of a random size on a random

a fixed size on the touched location.

which the spotlight

 

between the original

 

 

location.

 

is updated.

 

video and the effect

SPOT

 

 

 

 

 

 

video.

 

PATTERN2

Outputs image with a spotlight

Outputs an image with a spotlight of

 

 

 

 

 

 

 

 

of a random size on a random

a random size on the touched

 

 

 

11.

 

 

location.

location.

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN3

Outputs an image with a

Outputs an image with a spotlight of

 

 

 

 

 

 

spotlight of a random size and

a fixed size and random color on the

 

 

 

 

 

 

color on a random location.

touched location.

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN4

Outputs an image with a

Outputs an image with a spotlight of

 

 

 

 

 

 

spotlight of a random size and

a random size and color on the

 

 

 

 

 

 

color on a random location.

touched location.

 

 

 

 

 

 

 

 

 

 

 

28

En

USING THE EFFECT FUNCTION

12. DROP (*3)

AUDIO

Flanger effect is applied. Move

Touch more toward right side to

Rotate the dial

 

 

finger on touch panel to right-

enhance effect. Touch more toward

 

 

clockwise to enhance

 

 

left to change effect volume.

left side to decrease effect.

 

 

the effect. When dial is

 

 

 

 

 

 

rotated fully

 

 

 

 

 

 

counterclockwise, only

 

 

 

 

 

 

original sound is

 

 

 

 

 

 

output.

 

 

 

 

 

 

 

VIDEO

Outputs an image of a circle with color in motion.

 

 

 

 

 

 

 

 

 

 

 

PATTERN1

Outputs an image of a circle

The circle moves towards the

Sets the size of the

1 to 10

Sets the balance

 

 

with dot designs.

touched point.

circle.

 

between the original

 

 

 

 

 

 

video and the effect

 

PATTERN2

Outputs an image of a circle

 

 

 

 

 

 

 

video.

 

 

with border designs.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN3

Outputs an image of a circle

 

 

 

 

 

 

with vertically stretched image.

 

 

 

 

 

 

 

 

 

 

 

 

PATTERN4

Outputs an image of a circle

 

 

 

 

 

 

with original image.

 

 

 

 

 

 

 

 

 

 

 

(*1) When the [HOLD] button is set to ON, you can record the track of your finger touching the touch panel for a maximum of 8 seconds. (*2) The effect will not become visible unless the video effect performance monitor is touched.

(*3) When effect is set to ON, random effects are applied.

(*4) When effect is set to OFF, effect sounds cannot be heard even on monitor.

29

En

USING THE EFFECT FUNCTION

TEXT effects

1. BLOCK

VIDEO AUDIO

2. ROTATION

VIDEO AUDIO

SLIDE

AUDIO

3.

VIDEO

4. RANDOM

VIDEO AUDIO

ZOOM

AUDIO

5.

VIDEO

 

AUDIO

6. CRUSH

VIDEO

 

 

 

 

Parameter 1

 

 

Parameter 2 (LEVEL/DEPTH)

Description of the effect

Beat button parameters

(TIME/PARAMETER)

 

 

 

 

 

 

 

 

 

Description

 

 

Description

Dramatically changes the

For the time of 1 BPM beat, a 1/2 to

Sets the interval for

 

10 ms to

Rotate dial clockwise to

 

sound tone by moving the

32/1 time will be set for the interval in

which the cutoff

 

32 000 ms

enhance effect.

frequency of the filter in

which the cutoff frequency is moved.

frequency moves.

 

 

 

rhythm to the beat.

 

 

 

 

 

The text line chips away at

For the time of 1 BPM beat, a 1/2 to

Sets effect time.

 

 

 

 

 

Sets the balance between the

dot block units and then

32/1 time is set for which the text

 

 

 

original video and the text.

reconstructs itself at dot

disappears at dot block units and

 

 

 

 

block units.

then reconstructs itself again.

 

 

 

 

One phaser effect cycle is

For the time of 1 BPM beat, a 1/2 to

Sets the interval in

 

10 ms to

Rotate the dial clockwise to

quickly and simply created to

32/1 time will be set for the interval in

which the phaser

 

32 000 ms

enhance the effect. When dial

the beat.

which the phaser effect is moved.

effect moves.

 

 

is rotated fully

 

 

 

 

 

counterclockwise, only original

 

 

 

 

 

sound is output.

The text line is lines up and

For the time of 1 BPM beat, a 1/2 to

Sets effect time.

 

 

 

 

 

Sets the balance between the

forms a circle as it rotates.

32/1 time is set for which the text

 

 

 

original video and the text.

 

rotates once.

 

 

 

 

One Flanger effect cycle is

For the time of 1 BPM beat, a 1/2 to

Sets the interval for

 

10 ms to

Rotate the dial clockwise to

quickly and simply created to

32/1 time is set for the interval in

which the flanger

 

32 000 ms

enhance the effect. When dial

the beat.

which the flanger effect is moved.

effect moves.

 

 

is rotated fully

 

 

 

 

 

counterclockwise, only original

 

 

 

 

 

sound is output.

The text string will glow and

For the time of 1 BPM beat, a 1/2 to

Sets effect time.

 

 

 

 

 

Sets the balance between the

stretch out horizontally in a

32/1 time will be set in which the text

 

 

 

original video and the text.

linked manner, and then

begins to change and then returns to

 

 

 

 

return to the original string.

its original state again.

 

 

 

 

Cuts the sound in rhythm to

For the time of 1 BPM beat, a 1/8 to

Sets effect time.

 

10 ms to

Sets the balance between the

the beat.

8/1 cut time will be set.

 

 

16 000 ms

original sound and the effect

 

 

 

 

 

sound.

Random text lines appear.

For the time of 1 BPM beat, a 1/8 to

Sets effect time.

 

 

 

 

 

Sets the balance between the

 

8/1 time will be set for appearance of

 

 

 

original video and the text.

 

random text lines.

 

 

 

 

Outputs audio in which the

For the time of 1 BPM beat, a 1/8 to

Sets effect time.

 

10 ms to

Sets the balance between the

input sound starts from a

8/1 effect time will be set.

 

 

16 000 ms

original sound and the effect

high pitch and returns to its

 

 

 

 

sound.

normal sound.

 

 

 

 

 

Beginning from zoom-in on

For the time of 1 BPM beat, a 1/8 to

Sets effect time.

 

 

 

 

 

Sets the balance between the

each individual letter, a text

8/1 time is set for which the letters

 

 

 

original video and the text.

string is formed as the letters

zoom out to their set positions.

 

 

 

 

zoom out to their set

 

 

 

 

 

positions.

 

 

 

 

 

Outputs audio as if the input

For the time of 1 BPM beat, a 1/2 to

Sets the interval for

 

10 ms to

Rotate the dial clockwise to

sound has been crushed.

32/1 time will be set for the interval in

which the crush

 

32 000 ms

enhance the effect. When dial

 

which the crush effect is moved.

effect moves.

 

 

is rotated fully

 

 

 

 

 

counterclockwise, only original

 

 

 

 

 

sound is output.

From the first letter of the text

For the time of 1 BPM beat, a 1/2 to

Sets effect time.

 

 

 

 

 

Sets the balance between the

string, the letters become

32/1 time is set for which the text

 

 

 

original video and the text.

stretched from left to right as

appears as it is stretched, and then

 

 

 

 

they appear, and from the

disappears as it is stretched.

 

 

 

 

first letter of the text line, the

 

 

 

 

 

letters are stretched from

 

 

 

 

 

right to left as they disappear.

 

 

 

 

 

 

 

 

 

 

 

(*1) Video effects are dependant upon image display timing, with the result that an effect may not appear precisely as intended when the set time is very short.

Character

No.

Name

Description of character

 

 

 

1

ORIGINAL

Sets text alone, without reflecting the character.

 

 

 

2

SHADOW

Applies shadow to displayed text. When COLOR is B/W,

 

 

both will have the same effect.

 

 

 

3

TRANSPARENT

Makes text transparent.

 

 

 

4

OUTSIDE

Applies border to text.

 

 

 

5

HUE

Changes color of text (except when black and white).

 

 

 

30

En

USING THE JPEG VIEWER

USING THE JPEG VIEWER

JPEG files can be loaded and displayed from USB memory devices and SD cards. Up to eight JPEG files can be loaded.

USB

HI

JPEG

VIEWER

SD

CARD

CARD indicator

BEFORE USING THE JPEG VIEWER

Insert a USB memory device or SD card into this mixer.

Using a USB memory device

Insert a USB memory device containing JPEG files to the USB connector. Only USB memory devices formatted in FAT32 format can be used.

Using a SD card

Insert a SD card containing JPEG files into the SD CARD slot.

The memory card used must be formatted according to “SD Memory Card Specifications Part2 FILE SYSTEM SPECIFICATION Version1.0” (SD memory cards are formatted in the aforementioned standard upon shipping from their manufacturers). Unformatted memory cards cannot be used.

Memory cards formatted on computers or digital cameras may not operate properly.

Multi-media cards (MMC) cannot be used.

Do not remove the card or turn the power off while the CARD indicator is blinking (doing so may result in damage to the stored data).

Memory cards are delicate electronic devices. Do not bend them, subject them to strong shocks or impacts. Additionally, do not use or store memory cards in environments likely to create static electricity or electrical noise.

Memory cards may be damaged when exposed to impacts or static electricity. Handle them with care. It is strongly suggested that you periodically make copies of important data.

Pioneer will not be held responsible for any loss of data or direct/ indirect damages.

JPEG VIEWER SETUP

1Press the JPEG VIEWER button.

The JPEG play mode screen will appear.

9

7

1

 

2

4

3

 

 

8

5

 

6

1

[MANUAL

Sets the JPEG play mode to MANUAL.

 

MODE] button

 

 

 

 

2

[AUTO MODE]

Sets the JPEG play mode to AUTO.

 

button

 

 

 

 

3

[FADER MODE]

Sets the JPEG play mode to FADER.

 

button

 

 

 

 

4

[TIME] display/

When in AUTO mode, sets the time for

 

Change buttons

changing the JPEG images.

 

 

 

5

[JPEG BOX]

Selects the JPEG images that are to be

 

 

assigned to the channels.

 

 

 

6

Channel select

Sets the channel to which JPEG images

 

buttons

are to be assigned.

 

 

Alternatively use to cancel the assigned

 

 

JPEG.

 

 

 

7

[JPEG SELECT]

Enables JPEG select mode.

 

button

If operated when effects are ON, a

 

 

warning message will appear and the

 

 

screen will not change to the next menu.

 

 

 

8

[CLEAR] button

Alternates JPEG BOX clear mode ON/

 

 

OFF.

 

 

 

9

[EXIT] button

Exits JPEG viewer setup.

 

 

 

31

En

USING THE JPEG VIEWER

Loading JPEG files to the SVM-1000

Use this function to load JPEG files into the JPEG BOX. When effect is ON, this function is not usable.

1Touch the [JPEG SELECT] button in the JPEG play mode screen.

The JPEG select mode screen will appear.

87

28

84

1

3

6

5

1

Media/folder/

Displays media, files, and folders.

 

file display

 

 

 

 

2

Address display

Displays the address of the media/

 

 

folders/files currently being displayed.

 

 

 

3

Page display/

Advances the page display of the

 

Page change

displayed media/folder/file.

 

buttons

 

 

 

 

4

[BACK] button

Returns to the next higher level of the

 

 

folder hierarchy.

 

 

 

5

[JPEG BOX]

Selects the JPEG BOX into which the

 

 

JPEG is to be loaded.

 

 

 

6

[CLEAR] button

Alternates the JPEG BOX clear mode ON/

 

 

OFF.

 

 

 

7

[EXIT] button

Exits JPEG viewer mode and returns to

 

 

JPEG play mode.

 

 

 

2Select a JPEG file you wish to download from the media/ folder/file display.

The media/folder/file display will start from the media used (USB memory/SD card).

Only JPEG files will be displayed.

Displayable folders and JPEG files are in alphabetical order, with a maximum 64 folders and 192 files per hierarchical level.

3Touch the [JPEG BOX] to download the file.

4Touch the [EXIT] button to end the JPEG viewer mode and return to JPEG play mode (P. 31).

When power is turned OFF, JPEG images read into the unit will be deleted.

Using a JPEG file by assigning it to a channel.

The JPEG play mode includes MANUAL MODE, AUTO MODE, and FADER MODE, allowing a wide range of performance styles.

Operating in MANUAL MODE

Assign JPEG image in JPEG BOX as image for designated channel.

1Touch the [MANUAL MODE] button to select MANUAL mode.

2From the JPEG BOX, select the image you wish to assign.

When an image is touched, the border around the image will change to white.

3Select the channel to which you wish to assign the image.

Touch the channel select button for the channel you wish to assign the image to, and the selected image will be displayed on the channel monitor. In this condition, the JPEG image can be treated as the input image for that channel.

When the channel select button is ON, touching one of the other images in the JPEG BOX will cause the display to switch instantly to that image.

When a channel select button is ON, touching one of the other channel select buttons causes the assigned channel to be changed instantly.

A JPEG image can be assigned only to one channel selected with the channel select button.

If the channel select button is touched again, the assignment is canceled.

Operating in AUTO MODE

A slide show program can be created in which images in the JPEG BOX change automatically, and the slide show can be assigned to a designated channel.

1Touch the [AUTO MODE] button to select AUTO mode.

2From the JPEG BOX, select the images you wish to use.

Touch the multiple images you wish to use, and their borders will turn to white. Touching an image again will deselect it.

3Select the channel to which you wish to assign the images.

Touch the channel select button for the desired channel and the slide show of selected multiple images will be displayed on the channel monitor. In this condition, the slide show can be treated as the input image for that channel.

4Use the [TIME] change button to adjust the transition time for the slide show.

32

En

USING THE JPEG VIEWER

Operating in FADER MODE

Using the JPEG images in the JPEG BOX, a slide show can be created with transitions between images at chosen intervals. The channel fader for the assigned channel is used to perform the transitions.

1Touch the [FADER MODE] button to select FADER mode.

2Select the images you wish to use from the JPEG BOX.

Touch multiple images on the screen and their borders will change to white. Touch again to deselect images.

3Select the channel to which you wish to assign the images.

Touch the channel select button for the channel to which you wish to assign the images, and the image at the upper left of the group of selected images will be displayed on the channel monitor.

4Operate the fader.

Each time the channel fader for the assigned channel is raised from the [0] point, the images will change.

Deleting JPEG files downloaded to the JPEG BOX

1Touch the [CLEAR] button.

The [CLEAR] button will flash.

2Touch the images on the screen that you wish to delete.

The instant the image is touched, it disappears from the JPEG BOX. While the [CLEAR] button is flashing, you may continue by deleting other images if desired.

This process does not affect file data on attached SD cards or USB memory devices.

3Press the [CLEAR] button once again to leave this mode.

Usable JPEG files have a maximum size of 7 MB or about 12 MP.

If the original JPEG file does not fit within 640 x 480 pixels, the file will be automatically resized to 640 x 480 pixels when downloaded to the SVM-1000.

33

En

THE VIDEO EQUALIZER FUNCTION

THE VIDEO EQUALIZER FUNCTION

Rotating the channel equalizer dial normally applies equalizer effects on audio only. However, by using the VIDEO EQ function, effects can be applied to video as well.

 

VIDEO EQ SET UP Use to make the video effects change

 

simultaneously when using the equalizer.

 

OFF: Disables the VIDEO EQ.

VIDEO EQ

R: Used when assigning parameters that

HI

 

change the red elements of the VIDEO

 

EQ.

 

Used when assigning parameters.

 

G: Used when assigning parameters that

 

change the green elements of the VIDEO

 

EQ.

 

Used when assigning parameters.

 

B: Used when assigning parameters that

 

change the blue elements of the VIDEO

SET UP THE VIDEO EQ

EQ.

CONTRAST: Used when assigning

1 Hold down the VIDEO EQ button.

parameters that change the contrast of

the VIDEO EQ.

This initiates the equalizer setup mode.

 

2 Touch each applicable button.

 

HUE: Used when assigning parameters

Touch each applicable button on the screen to operate the

 

that change the hue of the VIDEO EQ.

VIDEO EQ setup.

 

 

 

 

SATURATION: Used when assigning

• Whenever power is first turned on, default settings are as

 

 

parameters that change the saturation of

follows:

 

the VIDEO EQ.

HI: CONTRAST

 

 

 

 

 

 

 

3 Touch [EXIT].

MID: HUE

LOW: SATURATION

This ends the equalizer setup mode.

Whenever power is turned OFF, the unit returns to the above

 

 

 

status.

 

 

 

 

 

 

TURNING THE EQUALIZER ON/OFF

• Identical parameter values cannot be allocated to HI, MID

and LOW.

1 Press the VIDEO EQ button.

 

 

 

 

The VIDEO EQ settings will alternate between enabled/

 

 

disabled each time the button is pressed.

34

En

FADER START FUNCTION

FADER START FUNCTION

By connecting the optional Pioneer DJ/VJ DVD Player or DJ CD Player control cable, the channel fader and cross fader can be used to start DVD/CD playback.

When the mixer’s channel fader lever or cross fader lever are moved, the DVD/CD player is released from the pause mode and automatically –and instantly – begins playback of the selected track. Also, when the fader lever is returned to its original position, the DVD/ CD player returns to its cue point (back cue), thus allowing “sampler” type play.

FADER

START

HI

CHANNEL

FADER

CROSS

FADER

ASSIGN

Cross fader lever (A/B)

CROSS FADER START PLAY AND BACK CUE PLAY

When the DVD/CD player assigned to cross fader channel A is set to standby at a cue point, moving the cross fader lever from the right (B) side toward the left (A) side automatically starts play on the channel A DVD/CD player.

When the cross fader lever reaches the left (A) side, the DVD/CD player assigned to channel B goes to back cue (returns to cue point). Also, when the DVD/CD player assigned to channel B is set to standby at a cue point, moving the cross fader lever from the left

(A) side to the right (B) side automatically starts playback on the channel B DVD/CD player. When the cross fader lever reaches the right (B) side, the DVD/CD player assigned to channel A goes to back cue (returns to cue point).

Using the Cross Fader to Start Playback

1Press the FADER START button for the channel (1 to 4) connected to the DVD/CD player you wish to control.

The button for the selected channel lights.

2Set the CROSS FADER ASSIGN switch for the selected channel to [A] or [B].

Select [A] to assign to cross fader channel A (left side).

Select [B] to assign to cross fader channel B (right side).

3Move the cross fader lever to the full opposite side away from the DVD/CD player you wish to start.

4Set the DVD/CD player to the desired cue point, and engage cue point standby.

If a cue point has already been set, it is not necessary to set the DVD/CD player to standby at the cue point.

5At the instant you wish to start playback, move the cross fader lever (A/B).

DVD/CD player begins playback.

After playback has begun, if the cross fader lever is moved fully to the opposite side, the DVD/CD player assigned to the opposite side channel will return to the cue point and enter standby mode (back cue).

Using the Channel Fader to Start Playback

1Press the FADER START button for the channel (1 to 4) connected to the DVD/CD player you wish to control.

The button for the selected channel lights.

2Set the channel fader lever to [0].

3Set the DVD/CD player to the desired cue point, and engage cue point standby.

If a cue point has already been set, it is not necessary to set the DVD/CD player to standby at the cue point.

4At the instant you wish to start playback, move the channel fader lever.

DVD/CD player begins playback.

After playback has begun, if the channel fader lever is returned to the [0] position, the DVD/CD player returns to the cue point and re-enters standby mode (back cue).

Playback control is possible with the channel fader only with the CROSS FADER ASSIGN switch is set to [THRU].

35

En

PERFORM UTILITY SETUP

 

 

PERFORM UTILITY SETUP

 

Set up MIDI

 

1

Hold the UTILITY (SET UP) button depressed.

UTILITY

 

The MIDI setup mode will be initiated.

 

 

(SET UP)

2

Touch [MIDI].

HI

 

The MIDI setup screen will be displayed.

 

 

 

3

Touch each applicable button.

 

 

Touch each applicable button on the screen to operate the

 

 

MIDI setup.

 

4

Touch [EXIT].

 

 

This will end the MIDI setup mode.

When power is turned OFF, all utility setup values other than MIDI CHANNEL and KEYBOARD LANGUAGE revert to their default values.

MIDI SETTINGS

MIDI is an acronym for “Musical Instrument Digital Interface” and refers to a protocol developed for the exchange of data between electronic instruments and computers.

A MIDI cable is used to connect components equipped with MIDI connectors to enable the transmission of data.

The SVM-1000 will use the MIDI function to send operational information for hardware and BPM (timing clock).

SYNCHRONIZING AUDIO SIGNALS TO EXTERNAL SEQUENCER, OR USING SVM-1000 INFORMATION TO OPERATE AN EXTERNAL SEQUENCER

1Connect the DIN connector to a MIDI sequencer, and the USB port to your computer.

This unit is equipped with both DIN type and USB type output connectors.

Supported operating systems include Windows Vista, Windows XP or Mac OSX.

For details regarding computer setup, refer to the instruction manual for your computer and operating system. For application setup instructions, refer to the instruction manual for the application involved.

Set the MIDI sequencer’s synch mode to “Slave”.

MIDI sequencers that do not support MIDI timing clock cannot be synchronized.

Synch may not be achieved if the track’s BPM cannot be detected and measured stably.

BPM values set with the TAP mode can also be used to output the timing clock.

2Set the MIDI OUT to ON in the MIDI setup.

The output range of the MIDI timing clock is 40 BPM to 250 BPM.

Note:

The BPM may not be measured correctly with some tracks.

Synchronize the computer application to the audio signals, or operate the computer application using the operation data for the SVM-1000.

1Connect the USB MIDI output connector of the SVM-1000 to your computer using the USB cable.

Perform the MIDI settings for the application program. For further information, refer to the instruction manual for application program.

Supported operating systems include Windows XP and Mac OSX.

MIDI OUT

Alternates MIDI signal output ON/OFF.

 

 

TIMING CLOCK

Switches the MIDI timing clock

SYNC.

synchronization between start and stop.

 

 

SNAP SHOT

Current MIDI information regarding dials

 

and buttons is transmitted.

 

 

BUTTON TYPE

Select the method in which the MIDI

 

signal is transmitted. Options include

 

toggle type and trigger type. In the trigger

 

type, any MIDI codes set to OFF will not be

 

sent, and MIDI codes set to ON will be

 

sent each time the button is pressed.

 

 

MIDI CHANNEL

Changes the MIDI channel. Configures

 

MIDI channels (1-16) and stores them in

 

memory.

 

 

36

En

PERFORM UTILITY SETUP

MIDI CODE LIST

Category

Switch Name

Switch Type

 

 

MIDI Message

 

 

Commnets

 

 

 

 

 

 

 

 

MSB

 

 

 

LSB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO TRIM

VR

Bn

31

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO TRIM

VR

Bn

01

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

HI

VR

Bn

02

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

CH1

MID

VR

Bn

03

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

LOW

VR

Bn

04

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CUE

BTN

Bn

46

dd

 

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

FADER

VR

Bn

11

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

CF ASSIGN

SW

Bn

41

dd

 

 

 

 

0, 64, 127

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO TRIM

VR

Bn

32

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO TRIM

VR

Bn

06

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

HI

VR

Bn

07

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

CH2

MID

VR

Bn

08

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

LOW

VR

Bn

09

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CUE

BTN

Bn

47

dd

 

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

FADER

VR

Bn

12

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

CF ASSIGN

SW

Bn

42

dd

 

 

 

 

0, 64, 127

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO TRIM

VR

Bn

33

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO TRIM

VR

Bn

0C

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

HI

VR

Bn

0E

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

CH3

MID

VR

Bn

0F

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

LOW

VR

Bn

15

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CUE

BTN

Bn

48

dd

 

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

FADER

VR

Bn

13

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

CF ASSIGN

SW

Bn

43

dd

 

 

 

 

0, 64, 127

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO TRIM

VR

Bn

34

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO TRIM

VR

Bn

50

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

HI

VR

Bn

51

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

CH4

MID

VR

Bn

5C

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

LOW

VR

Bn

52

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CUE

BTN

Bn

49

dd

 

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

FADER

VR

Bn

14

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

CF ASSIGN

SW

Bn

44

dd

 

 

 

 

0, 64, 127

 

 

 

 

 

 

 

 

 

 

 

CROSS FADER

CROSS FADER

VR

Bn

0B

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

FADER CURVE

CH CURVE

SW

Bn

5E

dd

 

 

 

 

0, 64, 127

 

 

 

 

 

 

 

 

 

 

CROSS CURVE

SW

Bn

5F

dd

 

 

 

 

0, 64, 127

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO MASTER

VR

Bn

38

dd

 

 

 

 

0 to 127

 

LEVEL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MASTER

AUDIO MASTER

VR

Bn

18

dd

 

 

 

 

0 to 127

LEVEL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BALANCE

VR

Bn

17

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

CUE

BTN

Bn

4A

dd

 

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

37

En

PERFORM UTILITY SETUP

Category

Switch Name

Switch Type

 

 

MIDI Message

 

 

Commnets

 

 

 

 

 

 

 

 

MSB

 

 

 

LSB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BOOTH

MONITOR

VR

Bn

19

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

AUTO/TAP

BTN

Bn

45

dd

 

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

TAP

BTN

Bn

4E

dd

 

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

EFFECT CUE

BTN

Bn

4B

dd

 

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

CH SELECT

SW

 

 

 

 

 

 

 

For CHANNEL SELECT and

 

 

 

 

 

 

 

 

 

 

VIDEO FX PATTERN, the

 

 

 

 

 

 

 

 

 

 

 

VIDEO FX PATTERN

SW

Cn

pc

 

 

 

 

 

logical sum of both values

 

 

 

 

 

 

is sent.

EFFECT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PARAMETER 1 value;

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FLANGER, PHASER, FILTER,

 

TIME/PARAMETER

SW

Bn

0D

MSB

Bn

 

2D

LSB

CHORUS changed to 1/2

 

 

value; minus values of

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ROBOT are converted to

 

 

 

 

 

 

 

 

 

 

positive.

 

 

 

 

 

 

 

 

 

 

 

 

LEVEL/DEPTH

VR

Bn

5B

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

EFFECT ON/OFF

BTN

Bn

40

dd

 

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

MIC

HI

VR

Bn

1E

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

LOW

VR

Bn

1F

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

FADER START CH1

BTN

Bn

58

dd

 

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

(FADER START)

FADER START CH2

BTN

Bn

59

dd

 

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

FADER START CH3

BTN

Bn

5A

dd

 

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FADER START CH4

BTN

Bn

5D

dd

 

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

(HEAD PHONES)

MIXING

VR

Bn

1B

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

LEVEL

VR

Bn

1A

dd

 

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TIMING CLOCK

Timing Clock

 

FB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MIDI

START

BTN

FA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

STOP

BTN

FC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

* The MIDI SNAP SHOT outputs all MIDI commands except MIDI START/STOP.

CENTER PANEL AREA

Category

Switch Name

Switch Type

 

 

MIDI Message

 

 

Commnets

 

 

 

 

 

 

 

 

MSB

 

 

 

LSB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

UTILITY

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO EQ

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

JPEG VIEWER

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO SOLO

BTN

 

 

 

MODE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FADER AV SYNC

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

38

En

PERFORM UTILITY SETUP

GUI BUTTONS

Category

Switch Name

Switch Type

 

 

MIDI Message

 

Commnets

 

 

 

 

 

 

 

 

 

MSB

 

 

LSB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BEAT EFFECT

BTN

 

 

 

Changing the category

 

 

 

 

 

 

 

 

 

 

 

 

TOUCH EFFECT

BTN

 

 

 

inevitably causes an effect

 

 

 

 

 

 

 

 

 

 

program change.

 

EFFECT

TEXT EFFECT

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CATEGORY

A

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AV

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

V

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DELAY

BTN

9n

41

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

ECHO

BTN

9n

42

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

PAN

BTN

9n

43

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

TRANS

BTN

9n

44

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

FILTER

BTN

9n

45

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

FLANGER

BTN

9n

46

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

PHASER

BTN

9n

47

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

REVERB

BTN

9n

48

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

ROBOT

BTN

9n

49

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

CHORUS

BTN

9n

4A

dd

 

 

 

OFF=0, ON=127

 

BEAT EFFECT

 

 

 

 

 

 

 

 

 

 

ROLL

BTN

9n

4B

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

REV ROLL

BTN

9n

4C

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

Beat BUTTON 1

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Beat BUTTON 2

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Beat BUTTON 3

BTN

 

 

 

 

 

 

The motion of the TIME/

 

 

 

 

 

 

 

 

 

 

 

 

Beat BUTTON 4

BTN

Bn

0D

MSB

Bn

2D

LSB

PARAMETER dial can be

 

 

 

 

 

 

 

 

 

 

replicated by the button

 

 

Beat BUTTON 5

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Beat BUTTON 6

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Beat BUTTON 7

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VISUALIZER

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BPM AUTO/TAP

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RIPPLE

BTN

9n

51

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

LENS

BTN

9n

52

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

SPOT

BTN

9n

53

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

RADIATION

BTN

9n

54

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

CUBE

BTN

9n

55

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

BLOCK

BTN

9n

56

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

KALEIDO

BTN

9n

57

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

TWIST

BTN

9n

58

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

TOUCH EFFECT

ZOOM

BTN

9n

59

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

DROP

BTN

9n

5A

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

BLUR

BTN

9n

5B

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

DISTORTION

BTN

9n

5C

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

HOLD

BTN

9n

50

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

 

 

TOUCH FX

VR

Bn

1C

dd

 

 

 

0 to 127

 

 

MONITOR X

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TOUCH FX

VR

Bn

3C

dd

 

 

 

0 to 127

 

 

MONITOR Y

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VISUALIZER

BTN

 

 

 

 

39

 

 

 

 

 

 

 

 

 

 

En

PERFORM UTILITY SETUP

Category

Switch Name

Switch Type

 

 

MIDI Message

 

Commnets

 

 

 

 

 

 

 

MSB

 

 

LSB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RANDOM

BTN

9n

60

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

ZOOM

BTN

9n

61

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

BLOCK

BTN

9n

62

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

ROTATION

BTN

9n

63

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

CRUSH

BTN

9n

64

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

SLIDE

BTN

9n

65

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

BANK1

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BANK2

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BANK3

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BANK4

BTN

 

 

 

 

TEXT EFFECT

 

 

 

 

 

 

 

 

 

BANK5

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BANK6

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TEXT EDIT

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Beat BUTTON 1

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Beat BUTTON 2

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Beat BUTTON 3

BTN

 

 

 

 

 

 

The motion of the TIME/

 

 

 

 

 

 

 

 

 

 

Beat BUTTON 4

BTN

Bn

0D

MSB

Bn

2D

LSB

PARAMETER dial can be

 

 

 

 

 

 

 

 

 

replicated by the button

 

Beat BUTTON 5

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Beat BUTTON 6

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Beat BUTTON 7

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BPM AUTO/TAP

BTN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH1 MONITOR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH2 MONITOR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH3 MONITOR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH4 MONITOR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FADE

BTN

9n

70

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

WIPE

BTN

9n

71

dd

 

 

 

OFF=0, ON=127

CROSS FADER

 

 

 

 

 

 

 

 

 

SWITCH

BTN

9n

72

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

CHROMA-B

BTN

9n

73

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

CHROMA-G

BTN

9n

74

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

LUMINANCE

BTN

9n

75

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

TRANS-A

BTN

Bn

4C

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

TRANS-B

BTN

Bn

4D

dd

 

 

 

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

 

CROSS FADER

VR

9n

7A

dd

 

 

 

0 to 127

 

 

 

 

 

 

 

 

 

 

40

En

PERFORM UTILITY SETUP

PERFORM VIDEO MONITOR SETUP

Set the video monitor output method.

Video monitor setup

1Hold the UTILITY (SET UP) button depressed.

This will initiate the utility setup mode.

2Touch [VIDEO MONITOR].

The video monitor setup screen will be displayed.

• When turning the power ON, [MASTER] will be selected.

3Touch each applicable button.

Touch each applicable button on the screen to operate the video monitor setup.

4Touch [EXIT].

This will end the utility setup mode.

MASTER

The master output is sent directly to the

 

monitor output.

 

 

MIRROR OF

The master output is flipped horizontally

MASTER

and sent to the monitor output.

 

 

MASTER &

Both master output and channel output

CHANNEL

are sent to the monitor output.

 

 

CHANNEL

All channels’ outputs are sent to the

 

monitor output.

 

 

KEYBOARD LANGUAGE SETUP

By connecting a keyboard to the USB connector, text can be entered through the keyboard during text edit mode (P. 22). Follow these steps to set up the connected keyboard type.

Keyboard language setup

1Hold the UTILITY (SET UP) button depressed.

This initiates the utility setup mode.

2Touch [KEYBOARD LANGUAGE].

The keyboard language setup screen will be displayed.

3Touch each applicable button.

Touch each applicable button on the screen to perform keyboard language setup.

4Touch [EXIT].

This will end the utility setup mode.

*With keyboards other than those listed, the characters actually appearing may be different from those pressed.

41

En

HARDWARE SETUP

HARDWARE SETUP

POWER

UTILITY

(SET UP)

HI

SYSTEM SETTINGS

1Touch [SYSTEM].

The SYSTEM setting screen will be displayed.

2Choose settings by touching [ ] or [ ].

The hardware setup values are preserved even when power is turned OFF.

Initiate hardware setup

1Turn the POWER switch on while pressing the UTILITY (SET UP) button.

Continue depressing the UTILITY (SET UP) button while the logo mark [PIONEER PRO DJ] is displayed.

The hardware setup screen will be displayed.

MIC SETTING

1Touch [MIC]

The MIC setting screen will be displayed.

2Choose settings by touching [ ] or [ ].

OUTPUT TO

Set whether or not to output the audio

BOOTH MONITOR

from the MIC to the booth monitor.

 

 

TALK OVER

Adjust the sensitivity of talk over.

THRESHOLD LEVEL

 

 

 

TALK OVER LEVEL

Adjust the level of talk over.

 

 

3Touch [SAVE] to save the settings.

The settings will not be implemented unless [SAVE] is touched.

VIDEO SYSTEM

Selects the video signal format. When

 

used in North America, it should be set to

 

NTSC (7.5 IRE).

 

 

DIGITAL OUT MAX

Selects the maximum level of the digital

LEVEL

out circuit.

 

 

3Touch [SAVE] to save the settings.

The settings will not be implemented unless [SAVE] is touched.

42

En

HARDWARE SETUP

MASTER OUT SETTINGS

1Touch [MASTER OUT].

The MASTER OUT setting screen will be displayed.

2Choose settings by touching [ ] or [ ].

BRIGHTNESS

Adjusts the brightness of the master output

 

monitor.

 

 

CONTRAST

Adjusts the contrast of the master output

 

monitor.

 

 

COLOR

Adjusts the color tone of the master output

 

monitor.

 

• Cannot be adjusted when the PAL video

 

system is used.

 

• Component outputs cannot be adjusted.

 

 

SATURATION

Adjusts the saturation of the master output

 

monitor.

 

 

SHARPNESS

Adjusts the sharpness of the master output

 

monitor.

 

 

3Touch [SAVE] to save the settings.

The settings will not be implemented unless [SAVE] is touched.

MONITOR OUT SETTINGS

1Touch [MONITOR OUT].

The MONITOR OUT setting screen will be displayed.

2Choose settings by touching [ ] or [ ].

BRIGHTNESS

Adjusts the brightness of the monitor output.

 

 

CONTRAST

Adjusts the contrast of the monitor output.

 

 

COLOR

Adjusts the color tone of the monitor output.

 

 

SATURATION

Adjusts the saturation of the monitor output.

 

 

SHARPNESS

Adjusts the sharpness of the monitor output.

 

 

3Touch [SAVE] to save the settings.

The settings will not be implemented unless [SAVE] is touched.

LCD SETTINGS

1Touch [LCD].

The LCD setting screen will be displayed.

2Choose settings by touching [ ] or [ ].

BACK LIGHT Adjust the backlight of the LCD.

3Touch [SAVE] to save the settings.

The settings will not be implemented unless [SAVE] is touched.

43

En

HARDWARE SETUP

TOUCH PANEL SETTINGS

1Touch [TOUCH PANEL].

The touch panel setting screen will be displayed.

2Touch either [TOP PANEL] or [BOTTOM PANEL] to select settings.

TOP PANEL

Calibrates the TOP panel.

 

 

BOTTOM PANEL

Calibrates the BOTTOM panel.

 

 

3Touch the [+] mark with a pointed object such as a pen.

Use a stylus pen or other type pen without a sharp tip.

4Touch all [+] marks and make sure the color of the [+] marks are inverted.

5Touch [SAVE] to save the settings.

The settings will not be implemented unless [SAVE] is touched.

RETURNING TO DEFAULT SETTINGS

1Touch [FACTORY PRESET].

The factory preset screen will be displayed.

2Touch to choose either [YES] or [NO].

ENDING HARDWARE SET UP

1 Set the [POWER] switch to OFF.

44

En

TROUBLESHOOTING

TROUBLESHOOTING

Incorrect operations are often mistaken for trouble and malfunctions. If you think there is something wrong with this component, check the points below. Sometimes the trouble may originate from another component. Thus, also check the other electrical appliances also in use.

If the trouble cannot be rectified even after checking the following items, contact your dealer or nearest PIONEER service center.

Symptom

Possible Cause

Remedy

 

 

 

No power.

• The power cord has not been connected.

• Connect to power outlet.

 

 

 

No sound, or sound volume is

AUDIO INPUT switch is set incorrectly.

• Set AUDIO INPUT switch to select the currently

too low.

 

playing component.

 

• Connection cables are not connected properly,

• Connect correctly.

 

or are disconnected.

 

 

• Connentors or plugs are dirty.

• Clean away any dirt before connecting.

 

• The rear panel MASTER ATT. switch is set to

• Adjust rear panel MASTER ATT. switch.

 

–6 dB, etc.

 

 

 

 

No microphone sound from

• The OUTPUT TO BOOTH MONITOR (P. 42) is set

• Set OUTPUT TO BOOTH MONITOR (P. 42) to ON.

BOOTH output.

to OFF.

 

 

 

 

No digital output.

• The digital output sampling frequency (fs) does

• Set rear panel sampling frequency selector to

 

not match the specifications of the connected

match the specifications of the connected

 

component.

component.

 

 

 

Sound is distorted.

• Audio master output level is too high.

• Adjust AUDIO MASTER LEVEL dial or the rear

 

 

panel MASTER ATT. switch.

 

• Input level is too high.

• Adjust the AUDIO TRIM dial so that the input

 

 

level approaches 0 dB on the channel level

 

 

indicator.

 

 

 

Cross fader doesn’t work.

CROSS FADER ASSIGN switch setting ([A],

• Correctly set the CROSS FADER ASSIGN switch

 

[THRU], [B]) is incorrect.

for the desired channel.

 

 

 

Can’t perform fader start with

• The FADER START button is set to OFF.

• Set the FADER START button to ON.

DVD/CD player.

• Rear panel CONTROL connector is not

• Use a control cable to connect the CONTROL

 

connected to DVD/CD player.

connectors of mixer and DVD/CD player.

 

• Only the rear panel CONTROL connector is

• Connect both the CONTROL connectors and

 

connected to the DVD/CD player.

analog input connectors.

 

 

 

Effects don’t work.

• Effect channel selecter (CH SELECT) setting is

• Correctly select the channel on which you wish

 

incorrect.

to apply effects.

 

• Effect parameter 2 dial (LEVEL/DEPTH) is set to

• Adjust the effect parameter 2 dial (LEVEL/

 

[MIN].

DEPTH).

 

 

 

BPM can’t be measured.

• Input level is too high, or too low.

• Adjust the AUDIO TRIM dial so that the input

Measured BPM value is

 

level approaches 0 dB in the channel level

incorrect.

 

indicator.

 

 

• Adjust other channels as well so that the input

 

 

levels approach 0 dB in the channel level

 

 

indicator.

 

• BPM may not be correctly measurable with

• Strike the TAP button to set BPM manually.

 

some tracks.

 

 

 

 

The measured BPM value is

• Some differences may occur due to differences

• No remedy is necessary.

different from the value

in BPM detection methods.

 

published with the DVD/CD.

 

 

 

 

 

MIDI sequencer can’t be

• MIDI sequencer’s synch mode is not set to

• Set MIDI sequencer’s sync mode to “slave”.

synchronized.

“slave”.

 

 

• MIDI sequencer is not supported type.

• MIDI sequencers that do not support MIDI

 

 

timing clock cannot be synchronized.

 

 

 

45

En

TROUBLESHOOTING

Symptom

Possible Cause

Remedy

 

 

 

No video image, or image is

VIDEO INPUT switch is set incorrectly.

• Set the VIDEO INPUT switch to select the

disrupted.

 

currently playing component.

 

• Connection cables are not connected properly,

• Connect correctly.

 

or are disconnected.

 

 

• Connectors or plugs are dirty.

• Clean away any dirt before connecting.

 

• Trim controls are set improperly.

• Adjust trim properly.

 

• Signal format of the input video source does not

• Select the hardware setup’s system settings to

 

match the system setting selected during

match the format of the video signal for the

 

hardware setup.

input/output video components.

 

• The TV monitor’s video signal format does not

 

 

match the system setting selected during

 

 

hardware setup.

 

 

• The TV monitor’s input selector is not set to the

• Set the TV monitor’s input selector to the type of

 

input type actually connected to the unit.

input connected to this unit.

 

• The TV monitor’s component setting is set to

• Set the TV monitor’s component setting to 525i

 

something besides 525i (interlaced).

interlaced).

 

 

 

The character pressed on the

• The keyboard connected to the USB connector

• Set the keyboard language setup to match the

keyboard is not entered.

does not match the setting selected during this

type of keyboard connected to the USB

 

unit’s keyboard language setup.

connector.

 

 

 

No response when touch panel

• Touch panel’s calibration is incorrect.

• Set calibration properly in hardware setup’s

is touched.

 

touch panel setting.

 

 

 

Static electricity or other external interference may cause the unit to malfunction. To restore normal operation, turn the power off and then on again.

ABOUT THE LCD SCREEN

Some monitors may display so-called “hot pixels” or “dead pixels” (constantly bright pixels or pixels that are permanently off). This is a phenomenon characteristic of such displays and is not considered a malfunction.

When used in cold regions, the screen may appear dark for a while after the power is first turned on. As the unit warms up with time, the screen will return to normal brightness.

Avoid exposing the monitor to direct sunlight, since reflected light may make the image difficult to view.

ABOUT MINIATURE FLUORESCENT TUBE TECHNOLOGY

The LCD screen is illuminated by internal miniature fluorescent tube technology.

Fluorescent tubes are rated for approximately 10 000 hours of use (lifetime may be shorter when the unit is used in cold regions).

When a fluorescent tube reaches the end of its lifetime, the screen will become darker, making it difficult or impossible to see displayed images. In this event, consult your dealer or service center for repairs.

46

En

SPECIFICATIONS

SPECIFICATIONS

1 General

Power source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V, 60 Hz Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 W Operating temperature . . . . +5 °C to +35 °C (+41 °F to +95 °F) Operating humidity . . . . . . . . . .5 % to 85 % (without condensation) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.7 kg (28.0 lb) Maximum dimensions

. . . . . . . . . . . . . . . . . . . . 500 mm (W) x 202.4 mm (H) x 420.6 mm(D) 19.69 in (W) x 7.97 in (H) x 16.56 in (D)

2 Audio section

Sampling rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 kHz A/D, D/A converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 bits Frequency response

DVD/LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Hz to 20 kHz MIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Hz to 20 kHz PHONO . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Hz to 20 kHz (RIAA)

S/N ratio (at rated output)

DVD/LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 dB PHONO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 dB MIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 dB Distortion (LINE-MASTER 1) . . . . . . . . . . . . . . . . . . . . . . . . . . 0.005 %

Standard input level/Input impedance

PHONO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –52 dBu/47 kΩ MIC 1, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –52 dBu/9 kΩ DVD/LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –12 dBu/22 kΩ

Standard output level/Load impedance/Output impedance MASTER 1 . . . . . . . . . . . . . . . . . . . . . . . +8 dBu/10 kΩ/10 Ω or less MASTER 2 . . . . . . . . . . . . . . . . . . . . . . . +2 dBu/10 kΩ/1 kΩ or less REC OUT . . . . . . . . . . . . . . . . . . . . . . . . –8 dBu/10 kΩ/1 kΩ or less BOOTH MONITOR . . . . . . . . . . . . . . .+8 dBu/600 Ω/600 Ω or less PHONES . . . . . . . . . . . . . . . . . . . . . . . +7.5 dBu/32 Ω/22 Ω or less

Rated output level/Load impedance

MASTER 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +26 dBu/10 kΩ MASTER 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +20 dBu/10 kΩ Crosstalk (DVD/LINE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 dB

Channel equalizer response

HI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –26 dB to +6 dB (13 kHz) MID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –26 dB to +6 dB (1 kHz) LOW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –26 dB to +6 dB (70 Hz)

Microphone equalizer response

HI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –12 dB to +12 dB (10 kHz) LOW. . . . . . . . . . . . . . . . . . . . . . . . . . . . –12 dB to +12 dB (100 Hz)

3 Video Section

Input signal . . . . . . . . . . . . . . . . . . . . . . . . . . . NTSC/PAL (selectable) Sampling rate

. . . . . . . . . . . . . . . . . . . 13.5 MHz, 8 bit, ITU-R BT.656, YCrCb 4:2:2 Input connector (sensitivity/impedance)

Composite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p/75 Ω S (Brightness). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p/75 Ω S (Color) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.286 Vp-p/75 Ω

Video output connector (Level/Impedance)

Composite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p/75 Ω S (Brightness). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p/75 Ω S (Color) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.286 Vp-p/75 Ω Component Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p/75 Ω Component Cb/Cr . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.7 Vp-p/75 Ω

4 Input/output connector systems

Audio section

PHONO input connectors

RCA pin jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 DVD/LINE input connectors

RCA pin jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 DVD input connectors

RCA pin jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 LINE input connectors

RCA pin jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 MIC input connectors

XLR connector/Phone jack (Ø 6.3 mm) . . . . . . . . . . . . . . . . . . . . 1 Phone jack (Ø 6.3 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

DIGITAL coaxial input connectors

RCA pin jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 MASTER output connectors

XLR connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 RCA pin jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

BOOTH output connectors

Phone jack (Ø 6.3 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 REC output connectors

RCA pin jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 DIGITAL coaxial output connector

RCA pin jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 PHONES output connector

Stereo phone jack (Ø 6.3 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Video Section

DVD input connectors

Composite input, RCA pin jacks . . . . . . . . . . . . . . . . . . . . . . . . . . 4 VIDEO input connectors

Composite input, RCA pin jacks . . . . . . . . . . . . . . . . . . . . . . . . . . 4 VIDEO EX input connectors

Composite input, RCA pin jacks . . . . . . . . . . . . . . . . . . . . . . . . . . 2 S-VIDEO input connectors

S-Video input, S-connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 MASTER output connectors

Component output, BNC connector . . . . . . . . . . . . . . . . . . . . . . . 1 Composite output, BNC connector . . . . . . . . . . . . . . . . . . . . . . . . 1 RCA pin jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 S-Video output, S-connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

MONITOR output connectors

Composite output, RCA pin jack . . . . . . . . . . . . . . . . . . . . . . . . . . 1 S-Video output, S-connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

OTHER

MIDI OUT connector

5P-DIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

CONTROL connector

Mini phone jacks (Ø 3.5 mm). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

5 Accessories

Power cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Specifications and appearance are subject to change without notice.

47

En

Should this product require service in the U.S.A. and you wish

Should this product require service in Canada, please contact a

to locate the nearest Pioneer Authorized Independent Service

Pioneer Canadian Authorized Dealer to locate the nearest Pio-

Company, or if you wish to purchase replacement parts,

neer Authorized Service Company in Canada.

operating instructions, service manuals, or accessories, please

Alternatively, please contact the Customer Service Department

call the number shown below.

at the following address:

800 – 782 – 7210

Pioneer Electronics of Canada, Inc.

Please do not ship your product to Pioneer without first calling

300 Allstate Parkway

the Customer Support Division at the above listed number for

assistance.

Markham, ON L3R OP2

PIONEER ELECTRONICS (USA), INC.

(905) 479-4411

CUSTOMER SUPPORT DIVISION

1 (877) 283-5901

P.O. BOX 1760, LONG BEACH,

 

CA 90801-1760, U.S.A.

For warranty information please see the Limited Warranty

For warranty information please see the Limited Warranty

sheet included with your product.

sheet included with your product.

 

Published by Pioneer Corporation.

Copyright © 2007 Pioneer Corporation.

All rights reserved.

PIONEER CORPORATION

4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC.

Multimedia and Mass Storage Division: 2265 East 220th Street, Long Beach, CA 90810, U.S.A. TEL: 800-444-OPTI (6784)

PIONEER ELECTRONICS OF CANADA, INC.

Industrial Products Department: 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: 905-479-4411

Printed in Malaysia

<DRB1421-B>