Files for
Size:
1.06 Mb
Download

FLASH MEMORY MULTIMEDIA AV NAVIGATION RECEIVER

AVIC-X920BT

Quick Start Guide

This guide is intended to guide you through the basic functions of this navigation system. For details, please refer to Operation Manual.

Basic Hardware buttons

1

 

 

 

 

 

1 button

 

 

 

 

 

Press to display the touch panel keys for eject-

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

ing the media.

 

 

 

 

 

 

 

 

 

 

2 VOL (+/–) button

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

Press to adjust the AV (Audio and Video)

 

 

 

 

 

source volume.

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

3 HOME button

 

 

 

 

5

 

 

 

 

 

Press to display the “Top Menu” screen.

 

 

 

 

 

4 MODE button

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

Press to switch between the map screen and

 

 

 

 

 

 

 

 

 

 

the AV operation screen.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5 TRK ( / ) button

 

 

 

 

 

6

button

 

 

 

 

 

 

Press briefly to start the voice operation.

 

 

 

 

 

 

Press and hold to mute the AV source.

Published by Pioneer Corporation.

 

Copyright © 2010 by Pioneer Corporation.

 

All rights reserved.

Printed in Thailand

<KYTNX> <10L00000>

<CRB3203-A/N> UC

Display the menu screen

Top Menu

Shortcut Menu

Destination Menu Phone Menu AV operation screen

Basic items on the map

 

 

1

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Dragging the map

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

4

allows scrolling.

 

 

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

1

 

Name of the street to be

6

Street name that your vehi-

 

 

used (or next guidance

 

 

 

cle is traveling along

 

 

point)

7

Eco-Meter

2

 

Current time

8

Zoom in/Zoom out

3

 

Estimated time of arrival

9

Next direction of travel

4Current route

5Current position

Destination Menu

Touch Destination on the “Top Menu” screen.

1

2

3

4

5 6 7 8 9

a

b

1Searches for location by address

2Calculates the route home

3Searches for a place from stores, restaurants, and other businesses in the points of interest database

4Searches for POIs by using the data on external storage devices (microSD card)

5Selects your stored location

6Returns to the previous screen

7Selects a previously routed destination

8Searches for a location by coordinates

9Cancels your current route a Displays the current route

information

b Displays information on MSN® Direct

Searching for your destination by address

1 Display the “Destination

4 Touch OK.

Menu” screen and touch

 

Address.

 

2 Input the information that you want to set as the destination.

Touching the one of options. After narrowing down your destination, the Location confirma-

tion screen will appear.

3 Touch OK.

This navigation system gives you route guidance visually and by voice.

After searching for the destination, the Route confirmation screen appears.

Pairing your phone
1 Activate the Bluetooth function on your phone.
2 Touch the keys in the fol-
lowing order in the “Top Menu” screen.
Settings Bluetooth
Settings
3 Touch Bluetooth On/Off to select On.
4 Touch Registration on the
Bluetooth Settings” screen.
The system tries to find and lists nearby devices.
5 Touch your phone on the list.
6 Enter the PIN code from your phone. (The default code is 1111.)
When the pairing is successful, the message will appear.

Setting the volume of the route guidance

1 Touch the keys in the following order in the “Top Menu” screen. Settings System Settings

Volume

2 Touch + or - to change the volume of the route guidance.

Inserting and ejecting a microSD card

For details about playable files, refer to Operation Manual.

Inserting a microSD card

Ejecting a microSD card

1 Insert your microSD card

1

Press button.

until it clicks.

2

Touch Eject SD on the

 

3

screen.

 

Press the middle of the

 

 

microSD card gently until

 

4

it clicks.

 

Pull the microSD card out

straight.

Using the radio (FM)

Scroll the screen by dragging an AV source icon up or down, and tap FM on the AV operation screen.

2 1 2

1 Displays the current preset

2 Scans until a broadcast

frequency list

strong enough for good

 

reception is found

Playing your Apple iPod

You can control an iPod by connecting the USB interface cable for iPod (CD-IU50V) (sold separately) to the navigation system.

1 Connect your iPod.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB interface

 

 

 

 

 

 

 

USB and mini-

 

 

jack connector

 

 

cable for iPod

The source changes and then playback will start.

2 Tap or drag the key that you want to operate.

1

2

3 4

5

6 7

1Displays the artist name list, album title list or song title list

2Displays the category list

3Displays the genre list

4Selects the song to play by scrolling and dragging the key up or down. To play the song, tap it

5Switches the list screen between music and video

6Selects a song by scrolling and dragging the character tab up or down. Tap the tab of the character for the song title that you want to display

7Starts playback by tapping an item to select

Transferring the phone book

1 Connect the cellular phone.

2 Touch Contacts Transfer

on the “Phone Menu” screen.

3 Check that the following screen is displayed, and operate your cellular phone to transfer the phone book entries.

After transferring the data is finished, a message asking whether you want to transfer more data appears.

4 Touch No.

The transferred data is imported to the navigation system.