Pioneer S-DV900SW, XV-DV700, S-DV700SW, XV-DV900, S-DV700ST User Manual

...
0 (0)
Pioneer S-DV900SW, XV-DV700, S-DV700SW, XV-DV900, S-DV700ST User Manual

XV-DV900

CONGRATULATIONS ON YOUR PURCHASE OF THIS FINE PIONEER PRODUCT.

Pioneer is on the leading edge of DVD research for consumer products and this unit incorporates the latest technological developments.

We are sure you will be fully satisfied with this system. Thank you for your support.

Location: underside of the unit

IMPORTANT

[For Taiwanese model]

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead

CAUTION:

 

 

 

The exclamation point within an

symbol, within an equilateral

TO PREVENT THE RISK OF ELECTRIC

equilateral triangle is intended to

triangle, is intended to alert the

SHOCK, DO NOT REMOVE COVER

alert the user to the presence of

user to the presence of uninsulated

(OR BACK). NO USER-SERVICEABLE

important

operating and

"dangerous voltage" within the

PARTS INSIDE. REFER SERVICING

maintenance

 

 

(servicing)

product's enclosure that may be of

TO

 

QUALIFIED

SERVICE

instructions

in the literature

sufficient magnitude to constitute

PERSONNEL.

 

 

 

accompanying the appliance.

a risk of electric shock to persons.

 

 

 

 

 

 

 

 

 

 

 

 

H002_En

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Operating Environment H045 En

Operating environment temperature and humidity:

+5°C – +35°C (+41°F – +95°F); less than 85%RH (cooling vents not blocked)

Do not install in the following locations

• Location exposed to direct sunlight or strong artificial light

• Location exposed to high humidity, or poorly ventilated location

VENTILATION: When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 28 cm at top, 10 cm at rear, and 15 cm at each side).

WARNING: Slot and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, to prevent fire hazard, the openings should never be blocked and covered with items, such as newspapers, table-cloths, curtains, etc. Also do not put the apparatus on the thick carpet, bed, sofa, or fabric having a thick pile.

H040 En

VOLTAGE SELECTOR SWITCH

Only multi-voltage model is provided with this switch.

Always check that selector are set properly before plugging the power cord into the wall outlet.

1.Disconnect the power cord.

2.Use a small-sized screwdriver.

3.Insert the screwdriver into the groove on the voltage selector, and adjust the VOLTAGE SELECTOR.

VOLTAGE SELECTOR

240 V

220V

–230V

110V

–120V

CAUTION 240 V

Power source voltage is factory adjusted at 240 volts. If your area is different, change the voltage selector’s setting.

H039En

On the inside cover of the unit.

Wall-mounting the center and surround speaker system

Before mounting

Remember that the speaker system is heavy and that its weight could cause the wood screws to work loose, or the wall material to fail to support it, resulting in the speaker falling. Make sure that the wall you intend to mount the speakers on is strong enough to support them. Do not mount on plywood or soft surface walls.

Mounting screws are not supplied. Use screws that are suitable for the wall material and that will support the weight of the speaker.

5 mm

10 mm

5 mm

Wood screw

Protrusion: 5-7mm

If you are unsure of the qualities and strength of the walls, consult a professional for advice.

Pioneer is not responsible for any accidents or damage that result from improper installation.

These labels can be found on the DVD/CD tuner rear panel and bottom panel and on the powered subwoofer rear panel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

[For Taiwanese model]

Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. This player is not suitable for commercial use.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

This product is for general household purposes. Any failure due to use for other than household purposes (such as longterm use for business purposes in a restaurant or use in a car or ship) and which requires repair will be charged for even during the warranty period. K041_En

Energy-saving design

This system is designed to use 0.55 W of electricity when power is switched to standby.

Installation precaution

Install components so that there are no obstructions above or either side, and nothing blocking ventilation holes.

Leave at least 5 cm of free space around the subwoofer and at least 28cm above and 15cm to the left and right of the DVD/CD Tuner, as shown below. Remember to also leave 15cm of space at the rear.

Use a vacuum cleaner periodically to clean the port of the subwoofer to keep it free of dust.

 

5 cm

5 cm

cm 5

Powered subwoofer unit (S-DV900/700SW)

28 cm

15 cm

cm 15

DVD/CD Tuner unit (XV-DV900/700)

Thank you for buying this Pioneer product.

Please read through these operating instructions so that you will know how to operate your model properly. After you have finished reading the instructions, put them in a safe place for future reference.

Contents

01 Before you start

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Introduction to home theater . . . . . . . . . . . 9 General disc compatibility . . . . . . . . . . . . . 9 CD-R/RW compatibility . . . . . . . . . . . . . 10 DVD-R/RW compatibility . . . . . . . . . . . . 10 PC-created disc compatibility . . . . . . . . 10 Compressed audio compatibility . . . . . . 10 JPEG file compatibility . . . . . . . . . . . . . . 11

02 Controls and displays

Front panel. . . . . . . . . . . . . . . . . . . . . . . . 12 Display unit . . . . . . . . . . . . . . . . . . . . . . . 12 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Remote control . . . . . . . . . . . . . . . . . . . . 15

03 Getting started

Switching on and setting up. . . . . . . . . . . 18

Setting the clock . . . . . . . . . . . . . . . . . . 19

Setting up the remote to control your

TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Using the Room Setup . . . . . . . . . . . . . . . 20 Using the on-screen displays . . . . . . . . . . 21

Playing discs . . . . . . . . . . . . . . . . . . . . . . 22

Basic playback controls . . . . . . . . . . . . . 23 Resume and Last Memory . . . . . . . . . . . 24

DVD disc menus . . . . . . . . . . . . . . . . . . 25

Video CD/Super VCD PBC menus . . . . . 26 Listening to the radio . . . . . . . . . . . . . . . . 27 Improving poor FM reception. . . . . . . . . 28 Memorizing stations . . . . . . . . . . . . . . . 28 Listening to station presets . . . . . . . . . . 29 Listening to other sources . . . . . . . . . . . . 29

04 Home theater sound

Auto listening mode . . . . . . . . . . . . . . . . . 30

Listening in surround sound . . . . . . . . . . .30 Dolby Pro Logic II Music settings . . . . . .31

Listening in stereo . . . . . . . . . . . . . . . . . . . 31

Listening with headphones . . . . . . . . . . . .32 Using the Advanced Surround effects . . . .32 Adjusting the Advanced Surround effect

level . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Enhancing dialogue . . . . . . . . . . . . . . . . . 33

Listening with a virtual surround back speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Using Quiet and Midnight listening

modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Adjusting the bass and treble . . . . . . . . . .35 Boosting the bass level . . . . . . . . . . . . . . . 35

Muting the sound . . . . . . . . . . . . . . . . . . . 36

05 Playing discs

Introduction. . . . . . . . . . . . . . . . . . . . . . . . 37

Using the Disc Navigator to browse the contents of a disc . . . . . . . . . . . . . . . . . . . 37 Scanning discs . . . . . . . . . . . . . . . . . . . . . 38

Playing in slow motion . . . . . . . . . . . . . . . 39 Frame advance/frame reverse . . . . . . . . . .39 Looping a section of a disc . . . . . . . . . . . .40

Using repeat play. . . . . . . . . . . . . . . . . . . . 40 Using the OSD . . . . . . . . . . . . . . . . . . . . 41

Using the display unit . . . . . . . . . . . . . . . 41

Using random play . . . . . . . . . . . . . . . . . . 42 Using the OSD . . . . . . . . . . . . . . . . . . . . 42

Creating a program list . . . . . . . . . . . . . . . 43

Using the OSD . . . . . . . . . . . . . . . . . . . . 43

Using the unit display . . . . . . . . . . . . . . . 46 Clearing the program list . . . . . . . . . . . .46

Searching a disc . . . . . . . . . . . . . . . . . . . . 46

Playing DVD-Audio ‘Bonus Groups’. . . . . .47

Switching subtitles . . . . . . . . . . . . . . . . . . 47

Switching DVD-Video audio language . . . .47

5

En

Switching DVD-Audio audio channels . . . 48 Switching Video CD/Super VCD audio channel . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Zooming the screen . . . . . . . . . . . . . . . . . 48

Switching camera angles. . . . . . . . . . . . . 49 Displaying disc information . . . . . . . . . . . 49 OSD disc information . . . . . . . . . . . . . . 49 Display unit information . . . . . . . . . . . . 51

06 Viewing JPEG discs

Playing a JPEG slideshow . . . . . . . . . . . . 52 Using the JPEG Disc Navigator and Photo Browser . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Zooming the screen . . . . . . . . . . . . . . . . . 53

07 Using the timer

Setting the wake-up timer . . . . . . . . . . . . 54 Turning the wake-up timer on/off . . . . . . 55 Setting the sleep timer . . . . . . . . . . . . . . . 56

08 Surround sound setup

Setting up surround sound . . . . . . . . . . . 57 System Setup menu options . . . . . . . . . 57 Setting the channel levels . . . . . . . . . . . 59

09 Video Adjust menu

Video Adjust. . . . . . . . . . . . . . . . . . . . . . . 60

Creating your own presets . . . . . . . . . . . 60

10 Initial Settings menu

Using the Initial Settings menu . . . . . . . . 62 Digital Audio Mode Settings. . . . . . . . . . . 62

Dolby Digital Out . . . . . . . . . . . . . . . . . . 62 DTS Out . . . . . . . . . . . . . . . . . . . . . . . . . 62 Linear PCM Out . . . . . . . . . . . . . . . . . . . 63

Video Output settings. . . . . . . . . . . . . . . . 63

TV Screen . . . . . . . . . . . . . . . . . . . . . . . 63 Component Out . . . . . . . . . . . . . . . . . . . 64 S-Video Out . . . . . . . . . . . . . . . . . . . . . . 65 Language settings . . . . . . . . . . . . . . . . . . 65 Audio Language . . . . . . . . . . . . . . . . . . 65 Subtitle Language . . . . . . . . . . . . . . . . . 65 DVD Menu Language. . . . . . . . . . . . . . . 66 Subtitle Display . . . . . . . . . . . . . . . . . . . 66

Display settings . . . . . . . . . . . . . . . . . . . . . 66 OSD Language . . . . . . . . . . . . . . . . . . . . 66 On Screen Display . . . . . . . . . . . . . . . . . 66 Angle Indicator . . . . . . . . . . . . . . . . . . . . 67 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Parental Lock . . . . . . . . . . . . . . . . . . . . . 67 Bonus Group. . . . . . . . . . . . . . . . . . . . . . 69 Auto Disc Menu . . . . . . . . . . . . . . . . . . . 70 Group Playback. . . . . . . . . . . . . . . . . . . . 70 DVD Playback Mode . . . . . . . . . . . . . . . .70 SACD Playback . . . . . . . . . . . . . . . . . . . . 71 PhotoViewer . . . . . . . . . . . . . . . . . . . . . . 71

11 Other connections

Connecting external antennas. . . . . . . . . .72 Connecting auxiliary components . . . . . . .72 Reducing the TV and line signal levels . .73

Recording mode . . . . . . . . . . . . . . . . . . . 74

Connecting using the S-video output. . . . .74 Connecting using the component video output . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

12 Additional information

Switching off the demo . . . . . . . . . . . . . . .76

Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . 76

Changing the clock format . . . . . . . . . . . .76 Changing the frequency step. . . . . . . . . . .76

Setting the TV format. . . . . . . . . . . . . . . . . 77

Watching NTSC on a PAL TV

(MOD. PAL) . . . . . . . . . . . . . . . . . . . . . . . . 77 Resetting the system . . . . . . . . . . . . . . . . . 77 Dimming the display . . . . . . . . . . . . . . . . . 77

Using and taking care of discs . . . . . . . . .78 Titles, groups, chapters and tracks . . . . .78

DVD Video regions . . . . . . . . . . . . . . . . . 78 Handling discs . . . . . . . . . . . . . . . . . . . . 79 Storing discs . . . . . . . . . . . . . . . . . . . . . . 79 Discs to avoid . . . . . . . . . . . . . . . . . . . . . 79

Proper installation and maintenance of this system. . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Hints on installation . . . . . . . . . . . . . . . .80 Cleaning the pickup lens. . . . . . . . . . . . .80 Problems with condensation. . . . . . . . . .80 Moving the system unit . . . . . . . . . . . . . .80

Power cord caution . . . . . . . . . . . . . . . . . 81

6

En

Troubleshooting . . . . . . . . . . . . . . . . . . . . 82 General . . . . . . . . . . . . . . . . . . . . . . . . . 82

DVD/CD/Video CD player . . . . . . . . . . . . 83

MP3/JPEG discs . . . . . . . . . . . . . . . . . . 84 Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Error Messages . . . . . . . . . . . . . . . . . . . 85

Screen sizes and disc formats . . . . . . . . . 87 Widescreen TV users . . . . . . . . . . . . . . . 87

Standard TV users . . . . . . . . . . . . . . . . . 87

Selecting languages using the language code list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Language code list . . . . . . . . . . . . . . . . . . 88 Country code list . . . . . . . . . . . . . . . . . . . 88 Preset code list . . . . . . . . . . . . . . . . . . . . 89 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Specifications . . . . . . . . . . . . . . . . . . . . . 94

7

En

01 Before you start

Chapter 1

Before you start

Features

DVD-Audio and SACD compatible

Experience the super high-quality audio performance of DVD-Audio and Super Audio CD (SACD).

The on-board 24-bit/192kHz DAC means that this player is fully compatible with high sampling-rate discs, capable of delivering exceptional sound quality in terms of dynamic range, low-level resolution and highfrequency detail.

Excellent audio performance with Dolby Digital, Dolby Pro Logic, Dolby

Pro Logic II*1 and DTS*2 software

Built-in Dolby Digital and DTS decoders let you enjoy true discrete multi-channel home theater sound with Dolby Digital and DTS encoded DVD discs.

Dolby Pro Logic and Dolby Pro Logic II decoding adds excitement to two-channel source material with surround sound playback.

Simple Room Setup for surround sound

Setting up basic surround sound is made a simple two step process with the Room Setup feature. Tell the unit the size of your listening room and your listening position, and the system automatically configures the surround sound.

Picture zoom

While a DVD or Video CD/Super VCD is playing, you can zoom in on any part of the picture at up to 4x magnification for a closer look. See Zooming the screen on page 48.

MP3 compatibility

This system is compatible with CD-R, CD-RW and CD-ROM discs that contain MP3 audio tracks. See also Compressed audio compatibility on page 10.

Graphical on-screen displays

Setting up and using your DVD home theater system is made very easy using the graphical on-screen displays.

Energy saving design

This system is designed to use 0.55 W of power when in standby mode.

*1 Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

*2 “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.

8

En

Before you start

Introduction to home theater

You are probably used to using stereo equipment to listen to music, but may not be used to home theater systems that give you many more options (such as surround sound) when listening to soundtracks.

Home theater refers to the use of multiple audio tracks to create a surround sound effect, making you feel like you're in the middle of the action or concert. The surround sound you get from a home theater system depends not only on the speakers you have set up in your room, but also on the source and the sound settings of the system.

DVD-Video has become the basic source material for home theater due to its size, quality, and ease of use. Depending on the DVD, you can have up to six different audio tracks coming from one disc, all of them being sent to different speakers in your system. This is what creates a surround sound effect and gives you the feeling of ‘being there’.

This system will automatically decode Dolby Digital, DTS, or Dolby Surround DVD-Video discs, according to your speaker setup. In most cases, you won’t have to make changes for realistic surround sound, but other possibilities (like listening to a CD with multichannel surround sound) are explained in

Home theater sound on page 30.

General disc compatibility

This system was designed and engineered to be compatible with software bearing one or more of the following logos:

DVD-Audio DVD-Video DVD-R DVD-RW

Audio CD Video CD

CD-R

CD-RW

Super Audio CD

Fujicolor CD

KODAK Picture CD

is a trademark of Fuji Photo Film Co. Ltd.

This player supports the IEC’s Super VCD standard. Compared to the Video CD standard, Super VCD offers superior picture quality, and allows two stereo soundtracks to be recorded. Super VCD also supports the widescreen size.

VIDEO

CD

Super Video CD (Super VCD)

Other formats, including but not limited to the following, are not playable in this system:

DVD-RAM / DVD-ROM / CD-ROM*

*Except those that contain MP3 or JPEG. See also Compressed audio compatibility and JPEG file compatibility below.

01

Español Nederlands Deutsch Français Italiano English

9

En

01 Before you start

DVD-R/RW and CD-R/RW discs (Audio CDs and Video CDs) recorded using a DVD recorder, CD recorder or personal computer may not be playable on this system. This may be caused by a number of possibilities, including but not limited to: the type of disc used; the type of recording; damage, dirt or condensation on either the disc or the player’s pick-up lens. See below for notes about particular software and formats.

CD-R/RW compatibility

This system will play CD-R and CD-RW discs recorded in CD Audio or Video CD format, or as a CD-ROM containing MP3 or JPEG files. However, any other content may cause the disc not to play, or create noise/distortion in the output.

This system cannot record CD-R or CDRW discs.

Unfinalized CD-R/RW discs recorded as CD Audio can be played, but the full Table of Contents (playing time, etc.) will not be displayed.

DVD-R/RW compatibility

This unit will play DVD-R/RW discs recorded using the DVD-Video format that have been finalized using a DVD-recorder.

This unit will play DVD-RW discs recorded using the Video Recording (VR) format.

DVD-RW shows in the display when a VR format DVD-RW disc is loading.

When playing a VR format DVD-RW discs that was edited on a DVD recorder, the screen may go momentarily black at edited points and/or you may see scenes from immediately before the edited point.

This unit cannot record DVD-R/RW discs.

Unfinalized DVD-R/RW discs cannot be played in this player.

10

PC-created disc compatibility

If you record a disc using a personal computer, even if it is recorded in a “compatible format” as listed above, there will be cases in which the disc may not be playable in this machine due to the setting of the application software used to create the disc. In these particular instances, check with the software publisher for more detailed information.

Check the DVD-R/RW or CD-R/RW software disc boxes for additional compatibility information.

Compressed audio compatibility

This unit will play CD-ROM, CD-R, and CD-RW discs containing files saved in the MPEG-1 Audio Layer 3 (MP3) format with a sampling rate of 32, 44.1 or 48kHz. Incompatible files will not play and the message Can’t play this format will be displayed (No Play in the Display unit).

Fixed bit-rate MP3 files are recommended. Variable bit-rate (VBR) MP3 files are playable, but playing time may not be shown correctly.

The CD-ROM used to compile your MP3 files must be ISO 9660 Level 1 or 2 compliant. CD physical format: Mode1, Mode2 XA Form1. Romeo and Joliet file systems are both compatible with this player.

Use CD-R or CD-RW media for recording your files. The disc must be finalized (i.e. the session must be closed) in order to play in this unit. This player is not compatible with multi-session discs. Only the first session of a multi-session disc will be recognized.

This player only plays tracks that are named with the file extension .mp3 or

.MP3.

En

Before you start

When naming MP3 files, add the corresponding file name extension (.mp3). Files are played according to the file extension. To prevent noise and malfunctions, do not use these extensions for other kinds of files.

This player can recognize up to 999 files (MP3/JPEG) and up to 499 folders. If a disc exceeds these limits, only files and folders up to these limits will be playable. Files and folders are read/ displayed in alphabetical order. Note that if the file structure is very complex, you may not be able to read/play all files on the disc.

Folder and track names (excluding the file extension) are displayed.

There are many different recording bitrates available to encode MP3 files. This unit was designed to be compatible with all of them. Audio encoded at 128Kbps should sound close to regular CD Audio quality. This player will play lower bit-rate files, but please note that the sound quality becomes noticeably worse at lower bit-rates.

JPEG file compatibility

Baseline JPEG and EXIF 2.1* still image files up to 8 mega-pixels are supported (maximum vertical and horizontal resolution is 5120 pixels). (*File format used by digital still cameras)

The CD-ROM used to compile your JPEG files must be ISO 9660 Level 1 or 2 compliant. CD physical format: Mode1, Mode2 XA Form1. Romeo and Joliet file systems are both compatible with this player.

This player only displays files that are named with the file extension .jpg or

.JPG.

01

Español Nederlands Deutsch Français Italiano English

11

En

02 Controls and displays

Chapter 2

Controls and displays

Front panel

1

2

3

TIMER

STANDBY/ON

OPEN/CLOSE

4

6

 

7

5

8

1 VOLUME buttons

Use to adjust the volume.

2

Press to stop playback.

3

Press to switch to the DVD/CD function. Also press to start/pause/resume playback.

4 Timer indicator

Lights when the wake-up timer is set (page 54).

5 STANDBY/ON

Press to switch the system on or into standby.

6Disc tray

7OPEN/CLOSE

Press to open/close the disc tray.

8 PHONES jack

Headphone jack.

Display unit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

10

 

 

9 Remote sensor

10 Display

 

 

 

 

See Display on page 13 for detailed

 

 

 

 

information.

12

En

Controls and displays

02

Display

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

3

4

5

6

7

8

9

10 11

 

12

13

14

 

 

MIDNIGHT

QUIET

PGM

RPT-1

RDM

V.PART

ATT

REC MODE

PRO LOGIC

 

 

 

 

 

 

 

 

 

 

 

 

 

DIGITAL

 

 

 

 

 

 

 

 

 

 

kHz

 

ADV.SURR.

 

 

 

 

 

 

 

 

 

 

MHz

 

PRGSVE

 

 

 

20

 

 

19

 

 

18 17

16 15

 

1Tuner indicators

Lights when a broadcast is being received.

Lights when a stereo FM broadcast is being received in auto stereo mode.

Lights when FM mono reception is selected.

2

Lights when a disc is playing.

3 MIDNIGHT

Lights when the Midnight mode is selected (page 34).

4 QUIET

Lights when the Quiet mode is selected (page 34).

5 PGM

Lights when a program list has been programmed (page 43).

6 RPT and RPT-1

RPT lights during repeat play. RPT-1 lights during repeat one-track play (page 40).

7 RDM

Lights during random play (page 42).

8 V.PART

Light when playing a video part of a DVD disc.

9 ATT

Lights when the input attenuator is active for the currently selected analog input (page 73).

10 REC MODE

Lights when Rec Mode is active (page 74).

11Timer indicators

Lights when the wake-up timer is set (page 54).

Lights when the sleep timer is active (page 56).

122 PRO LOGIC II

Lights during Dolby Pro Logic decoding (page 30).

13 2 DIGITAL

Lights during playback of a Dolby Digital source (page 30).

Español Nederlands Deutsch Français Italiano English

13

En

02 Controls and displays

14 Speaker indicators

These show which speakers are being used to output the current source. The illustrations below show some example displays.

5.1 channel surround sound

Stereo (2.1 channel) sound

3.1 channel sound with Dialogue enhancement on the center channel

5.1 channel surround sound with Virtual Surround Back mode active

15 PRGSVE

Lights when progressive scan video output is selected (page 64).

16 ADV.SURR.

Lights when one of the Advanced Surround listening modes is selected (page 32).

17 DTS

Lights during playback of a DTS source (page 30).

18 kHz / MHz

Indicates the unit of the frequency shown in the character display (kHz for AM, MHz for FM).

19Character display

20

Lights during multi-angle scenes on a DVD disc (page 49).

14

En

Controls and displays

Remote control

STANDBY/ON

1

2

CD

FM/AM

L1/L2

 

DVD

TUNER TV

LINE

 

3

DISPLAY

 

 

OPEN/CLOSE

11

 

 

 

 

4

 

 

 

 

 

5

 

 

 

 

12

6

DVD MENU

 

RETURN

13

 

 

TUNE+

 

 

 

 

 

 

7

ST–

 

ST+

 

 

 

ENTER

 

 

8

MUTE

 

TUNE–

SOUND

14

 

 

 

 

9

 

 

MASTER

 

 

 

 

VOLUME

 

 

 

 

TV CONTROL

 

10

CH

 

INPUT

VOL

 

15

BASS MODE

DIALOGUE

VIRTUAL SB

 

AUTO

 

SURROUND

ADVANCED

 

16

PROGRAM

REPEAT

RANDOM

 

AUDIO

 

SUBTITLE

ANGLE

 

 

 

 

17

ZOOM

 

TOP MENU

HOME

 

 

MENU

 

1

 

2

3

 

18

SYSTEM

 

TESTTONE

CH LEVEL

 

SETUP

 

 

4

 

5

6

22

19

DIMMER

 

QUIET/

TIMER/

 

MIDNIGHT

CLOCK

 

7

 

8

9

 

20

 

 

FOLDER–

FOLDER+

 

CLR

 

0

ENTER

 

21

MAIN

 

SUB

ROOM SETUP

 

 

 

 

 

 

Functions printed in green on the remote control are accessed by switching the

MAIN/SUB switch to SUB.

1 STANDBY/ON

Press to switch the system on or into standby.

2 Function select buttons

Press to select the source you want to listen to (DVD (CD). TUNER, TV, LINE)

3 DISPLAY

Press to display/change disc information shown on-screen (page 49).

4 Disc playback controls

Press to start or resume playback.

and

Use for reverse slow motion playback, frame reverse and reverse scanning.

and

Use for forward slow motion playback, frame advance and forward scanning.

Press to pause playback; press again to restart.

Press to stop playback.

5

Press to jump to the beginning of the current chapter/track, then to previous chapters/ tracks.

6 DVD MENU

Press to display a DVD disc menu, or the Disc Navigator if a VR format DVD-RW, CD, Video CD/Super VCD, MP3 or JPEG disc is loaded.

7 Cursor buttons, ENTER and tuning buttons

Cursor buttons

Use the cursor buttons (/ / /) to navigate on-screen displays and menus.

ENTER

Press to select an option or execute a command.

TUNE +/–

Use to tune the radio.

ST +/–

Use to select station presets when listening to the radio.

02

Español Nederlands Deutsch Français Italiano English

15

En

02 Controls and displays

8MUTE

Press to mute all sound from the speakers and headphones (press again to cancel) (page 36).

9MASTER VOLUME

Use to adjust the volume.

10TV CONTROL (page 20)

Press to switch the TV on or into standby.

INPUT

Press to switch the TV input.

CH +/–

Use to select channels on the TV.

VOL +/–

Use to adjust the volume on the TV.

11OPEN/CLOSE

Press to open/close the disc tray.

12

Press to jump to the next chapter/track.

13 RETURN

Press to return to a previous menu screen.

14 SOUND

Press to access the sound menu, from which you can adjust the DSP effect level, bass and treble, etc.

15 Surround sound mode/sound enhancement buttons

(In MAIN)

AUTO

Press to select the default decoding for the current source (page 30).

SURROUND

Use to select a Surround mode (page 30).

ADVANCED

Use to select an Advanced Surround (page 32).

16

(In SUB)

BASS MODE

Use to select a Bass Mode (page 35).

DIALOGUE

Use to select a Dialogue mode (page 33).

VIRTUAL SB

Press to switch the Virtual Surround Back speaker effect on/off (page 34).

16DVD/CD buttons (In MAIN)

AUDIO

Press to select an audio channel or language (page 47).

SUBTITLE

Press to display/change the DVD subtitle display (page 47).

ANGLE

Press to change camera angle during DVD multi-angle scene playback (page 49).

(In SUB)

PROGRAM

Use to program/play a program list (page 43).

REPEAT

Use to select a repeat play mode (page 40).

RANDOM

Use to select a random play mode (page 42).

17(In SUB)

ZOOM

Press to change the screen zoom level (page 48).

TOP MENU

Use to display the top menu of a DVD disc in the play position (this may be the same as pressing DVD MENU).

En

Controls and displays

HOME MENU

Press to display (or exit) the on-screen menu for Initial Settings, Play Mode functions, etc.

18(In SUB)

SYSTEM SETUP

Use to make various system and surround sound settings (page 57).

TEST TONE

Use to output the test tone (for speaker setup) (page 59).

CH LEVEL

Use to adjust the speaker level (page 59).

19(In SUB)

DIMMER

Press to dim or brighten the display.

QUIET/MIDNIGHT

Use to select the Quiet and Midnight modes (page 34).

TIMER/CLOCK

Press to display the clock and to access the timer menu (page 19 and page 54).

20(In MAIN)

CLR

Press to clear an entry.

ENTER

Selects menu options, etc. (works exactly the same as the ENTER button in 7 above).

(In SUB)

FOLDER –

Press to jump to previous folders.

FOLDER +

Press to jump to the next folder.

21 MAIN / SUB

Change from MAIN to SUB to access functions printed in green.

(In MAIN)

ROOM SETUP

Press to start Room Setup (page 20).

22(In MAIN)

Number buttons

Use the number buttons for selecting titles/chapters/tracks from a disc directly.

02

Español Nederlands Deutsch Français Italiano English

17

En

03 Getting started

Chapter 3

Getting started

Switching on and setting up

After making sure everything is connected up properly, you’re ready to switch on. The first thing to do is to tell the system what kind of TV you’re using, standard or widescreen.

After that you can set up the surround sound for your room, and set the clock so that you can use the timer features.

 

STANDBY/ON

CD

FM/AM

L1/L2

DVD

TUNER TV

LINE

DISPLAY

 

OPEN CLOSE

DVD MENU

 

RETURN

 

TUNE+

 

ST–

 

ST+

 

ENTER

 

MUTE

TUNE–

SOUND

MASTER

VOLUME

TV CONTROL

CH INPUT VOL

1 Press STANDBY/ON (on the remote or on the front panel) to switch the system on.

Also make sure that your TV is switched on and that the video input is set to this system.

18

You should see the welcome screen displayed.

Welcome to Pioneer DVD!

Thank you for purchasing this Pioneer DVD player.

Before using, please take a little time to setup your DVD player

Put the batteries into the remote control

Next, press the [ENTER] button on the remote control and start the Let's Get Started Menu

Next

2Press ENTER to move on to the next screen.

3Use the / (cursor left/right) buttons to select either ‘Wide screen (16:9)’ or ‘Standard size screen (4:3)’ according to the kind of TV you have, then press ENTER.

See also Screen sizes and disc formats on page 87 if you’re not sure which one to choose.

Let's Get Started Menu

What kind of TV do you have? Use the / cursor buttons to choose, then press [ENTER]

Wide screen (16:9) Standard size screen (4:3)

En

Getting started

03

4 Press ENTER again to finish setting up.

Let's Get Started Menu

Setup complete

If you're finished setting up, choose [Complete],

to start again choose [Back]

Complete

Back

Use the (cursor right) button to select Back then press ENTER if you want to go back and change the setting you just made.

You can also use the function buttons

(DVD/CD, TUNER, etc.) or the OPEN/ CLOSE button to switch the system on from standby.

Setting the clock

Setting the clock allows you to use the timer features.

 

STANDBY/ON

 

CD

FM/AM

L1/L2

DVD

TUNER TV

LINE

DISPLAY

 

OPEN CLOSE

DVD MENU

 

RETURN

 

TUNE+

 

ST–

 

ST+

 

ENTER

 

MUTE

TUNE–

SOUND

MASTER

VOLUME

TV CONTROL

CH

INPUT

VOL

BASS MODE

DIALOGUE

VIRTUAL SB

AUTO

SURROUND

ADVANCED

PROGRAM

REPEAT

RANDOM

AUDIO

SUBTITLE

ANGLE

ZOOM

TOP MENU

HOME

MENU

1

2

3

SYSTEM

TESTTONE

CH LEVEL

SETUP

4

5

6

DIMMER

QUIET/

TIMER/

MIDNIGHT

CLOCK

7

8

9

 

FOLDER–

FOLDER+

CLR

0

ENTER

MAIN

SUB

ROOM SETUP

1Press TIMER/CLOCK.

If you are adjusting the clock, rather then setting it for the first time, press TIMER/ CLOCK again.

2If ‘Clock ADJ?’ isn’t already showing in the display, press or (cursor left or right) until you see it.

3Press ENTER.

4Use the / (cursor up/down) buttons to set the hour.

5Press ENTER.

Español Nederlands Deutsch Français Italiano English

19

En

03 Getting started

6Use the / (cursor up/down) buttons to set the minute.

7Press ENTER to confirm.

The display flashes to indicate the clock is set.

Press TIMER/CLOCK anytime to display the clock.

If you unplug the system from the wall outlet, or there is a power outage, you will need to set the clock again.

Setting up the remote to control your TV

You can set up the supplied remote to control your TV using the TV CONTROL buttons.

1Switch on your TV.

2Find the name of the manufacturer of your TV in the Preset code list on page 89

Next to each manufacturer is one or more three digit codes. These tell the remote what kind of TV you have.

If the name of the manufacturer of your TV does not appear in the table, you won’t be able to set up this remote to control your TV.

3 Point the remote at your TV, hold down the CLR button, then enter the three digit code for your TV.

The remote transmits an on/off signal to the TV. If you’ve entered the correct code, your TV should switch off.

If your TV doesn’t turn off, repeat the procedure using the next code in the list until your TV switches off successfully. Once set, you can then use the individual TV controls shown below.

20

MASTER

VOLUME

TV CONTROL

 

CH

INPUT

VOL

 

BASS MODE DIALOGUE

VIRTUAL SB

 

AUTO

SURROUND

ADVANCED

 

PROGRAM

REPEAT

RANDOM

Button

What it does

Switches your TV on or into standby.

CH +/– Changes the TV channel.

VOL +/– Adjusts the TV volume.

INPUT Switches the TV’s input between the built in TV tuner and an external video source.

• The default setting is for a Pioneer TV.

Using the Room Setup

Before using your system to enjoy surround sound playback, we recommend you spend a few minutes using the Room Setup. This is a quick and easy way to get good surround sound for your room.

Depending on the distance of the surround speakers from your main listening position, choose between S (small), M (medium), or L (large) room, then depending on your seating position relative to the front and surround speakers, choose Fwd (forward), Mid (middle), or Back.

En

Getting started

1If the system isn’t already on, press STANDBY/ON to switch it on.

2Press ROOM SETUP.

If you have previously set up the room type and seating position, the display will show the current room settings.

3Press ENTER.

4Use the / (cursor up/down) buttons to select a room type then press ENTER.

Choose one of the following depending on your room size:

S – Smaller than average room

M – Average room

L – Larger than average room

5Use the / (cursor up/down) buttons to select a seating position setting, then press ENTER.

Choose one of the following depending on where your main listening position is:

Fwd – If you are nearer to the front speakers than the surround speakers

Mid – If you are equal distance from the front and surround speakers

Back – If you are nearer to the surround speakers than the front speakers

The Room Setup automatically sets up both channel level and speaker distance. If you have already set the channel levels manually (see page 59) or speaker distance settings (see page 58), you will see Room Set? in the display when you first press the ROOM SETUP button.

Using the Room Setup will overwrite any previous settings you had for channel level and speaker distance.

For a more detailed surround sound setup, see Setting up surround sound on page 57.

Using the on-screen displays

For ease of use, this system makes extensive use of graphical on-screen displays (OSDs). You should get used to the way these work as you’ll need to use them when setting up the system, using some of the playback features, such as program play, and when making more advanced settings for audio and video.

All the screens are navigated in basically the same way, using the cursor buttons ( , ,, ) to change the highlighted item and pressing ENTER to select it.

Throughout this manual, ‘Select’ means use the cursor buttons to highlight an item on-screen, then press ENTER.

03

Español Nederlands Deutsch Français Italiano English

21

En

03 Getting started

DISPLAY

OPEN CLOSE

DVD MENU RETURN

ENTER

MUTE SOUND

MASTER

VOLUME

TV CONTROL

 

CH

 

INPUT

 

VOL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BASS MODE

DIALOGUE

VIRTUAL SB

 

AUTO

SURROUND

ADVANCED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROGRAM

 

 

REPEAT

 

 

RANDOM

 

 

AUDIO

SUBTITLE

 

ANGLE

 

 

 

 

 

 

 

 

 

 

 

 

 

ZOOM

TOP MENU

 

HOME

 

 

 

MENU

 

 

1

 

 

2

 

 

3

 

 

 

 

SYSTEM

 

TESTTONE

CH LEVEL

 

SETUP

 

4

 

 

5

 

 

6

 

 

 

 

DIMMER

 

QUIET/

 

 

TIMER/

 

 

 

 

MIDNIGHT

 

CLOCK

 

7

 

 

8

 

 

9

 

 

 

 

 

 

 

FOLDER–

FOLDER+

 

CLR

 

 

0

 

 

ENTER

 

 

 

 

MAIN

SUB

ROOM SETUP

 

 

 

 

 

 

 

 

 

 

 

 

Button

What it does

HOME

Displays/exits the on-screen

MENU

display

 

 

 

Changes the highlighted menu

 

item

 

 

ENTER

Selects the highlighted menu

 

item (both ENTER buttons work

 

in exactly the same way)

 

 

RETURN

Returns to the main menu

 

without saving changes

 

 

The button guide at the bottom of every OSD screen shows you which buttons you’ll need to use for that screen.

Playing discs

The basic playback controls for playing DVD, CD, SACD, Video CD/Super VCD and MP3 discs are covered here. Further functions are detailed in the chapter 5.

Throughout this manual, the term ‘DVD’ means any kind of DVD disc (DVD-Video, DVD-Audio or DVD-R/RW).

1 If the player isn’t already on, press STANDBY/ON to switch it on.

If you’re playing a DVD or Video CD/Super VCD also turn on your TV and make sure that it is set to the correct video input.

2 Press OPEN/CLOSE to open the disc tray.

3 Load a disc.

Load a disc with the label side facing up, using the disc tray guide to align the disc (if you’re loading a double-sided DVD disc, load it with the side you want to play face down).

22

En

Getting started

03

4 Press (play) to start playback.

If you’re playing a DVD or Video CD/Super VCD, a menu may appear. See DVD disc menus on page 25 and Video CD/Super VCD PBC menus on page 26 for how to navigate these.

If you’re playing an MP3 disc, it may take a few seconds before playback starts, depending on the complexity of the file structure on the disc.

If you loaded a CD/CD-R/RW containing JPEGs, a slideshow will start. See Viewing JPEG discs on page 52 for more on playing these discs.

See also PhotoViewer on page 71 if the disc contains both MP3 audio files and JPEG picture files.

5 Use the MASTER VOLUME – / + button (or the top panel VOLUME buttons) to adjust the volume.

Basic playback controls

The table below shows the basic controls on the remote for playing discs. You can find other playback features in the chapter 5.

 

STANDBY/ON

 

CD

FM/AM

L1/L2

DVD

TUNER TV

LINE

DISPLAY

 

OPEN CLOSE

DVD MENU

 

RETURN

 

TUNE+

 

ST–

 

ST+

 

ENTER

 

MUTE

TUNE–

SOUND

MASTER

VOLUME

TV CONTROL

 

CH

INPUT

 

VOL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BASS MODE

DIALOGUE

VIRTUAL SB

 

AUTO

SURROUND

ADVANCED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROGRAM

 

 

REPEAT

 

 

RANDOM

 

 

AUDIO

SUBTITLE

 

ANGLE

 

 

 

 

 

 

 

 

 

 

 

 

 

ZOOM

TOP MENU

 

HOME

 

 

 

 

MENU

 

 

 

1

 

 

2

 

 

3

 

 

 

 

SYSTEM

 

 

TESTTONE

CH LEVEL

 

SETUP

 

4

 

 

5

 

 

6

 

 

 

 

DIMMER

QUIET/

 

 

TIMER/

 

 

MIDNIGHT

 

CLOCK

 

7

 

 

8

 

 

9

 

 

 

 

 

 

 

 

FOLDER–

FOLDER+

 

CLR

 

 

0

 

 

ENTER

 

 

MAIN

SUB

ROOM SETUP

 

 

 

 

 

 

 

 

 

 

 

 

Button

What it does

 

Starts playback.

 

DVD and Video CD: If the display

 

shows Resume or Last Mem

 

playback starts from the resume

 

or last memory point (see also

 

Resume and Last Memory

 

below.)

 

 

Español Nederlands Deutsch Français Italiano English

23

En

03 Getting started

Button

What it does

 

 

Pauses a disc that’s playing, or

 

restarts a paused disc.

 

 

 

 

Stops playback.

 

 

DVD and Video CD: The display

 

shows Resume. Press again if

 

you want to cancel the resume

 

function. (See also Resume and

 

Last Memory below.)

 

 

 

Press to start fast reverse

 

scanning. Press

(play) to

 

resume normal playback.

 

 

 

Press to start fast forward

 

scanning. Press

(play) to

 

resume normal playback.

Skips to the start of the current track or chapter, then to previous tracks/chapters.

Skips to the next track or chapter.

FOLDER +/– Skips to the next/previous folder (SUB) when playing a JPEG or MP3

disc.

Numbers Use to enter a title/track/group/ chapter number. Press ENTER to select (or wait a few seconds).

If the disc is stopped, playback starts from the selected title/ group (for DVD-Video/DVD- Audio) or track number (for SACD/CD/Video CD/Super VCD/ MP3).

If the disc is playing, playback jumps to the start of the selected chapter or track (within the current group for DVD-Audio).

24

You may find with some DVD discs that some playback controls don’t work in certain parts of the disc. This is not a malfunction.

Track skip and number buttons for track selection do not work with unfinalized CD- R/RW discs.

Using the top panel controls

The OPEN/CLOSE, and (stop) buttons on the top panel work the same way as the remote control equivalents.

Resume and Last Memory

When you stop playback of a DVD or Video CD disc, Resume is shown in the display indicating that you can resume playback again from that point.

If the disc tray is not opened, the next time you start playback the display shows Resume and playback resumes from the resume point.

For DVD discs only: If you take the disc out of the player, the play position is stored in memory. When you load the disc next time, the display shows Last Mem and you can resume playback (this works for up to five discs).

If you want to clear the resume/last memory point, press (stop) while Resume or Last Mem is displayed.

When a Video CD is loaded, the Resume point is lost if the system is switched off, or switched to a function other than DVD (CD).

For the Last Memory function to work, you

must press (stop) to stop playback before opening the disc tray.

En

Getting started

Resume and Last Memory are not available with DVD-Audio discs.

The Last Memory function doesn’t work with VR format DVD-RW discs.

With MP3 format discs, playback does not resume. Instead, playback begins of the first track of the folder containing the file that was playing when playback was stopped.

After I load a DVD disc, it ejects automatically after a few seconds!

Most likely, the disc is the wrong region for your system. The region number should be printed on the disc; check it against the region number of the system (which you can find on the rear panel). See also DVD Video regions on page 78.

If the region number is OK, it may be that the disc is damaged or dirty. Clean the disc and look for signs of damage. See also Using and taking care of discs on page 78.

Why won’t the disc I loaded play?

First check that you loaded the disc the right way up (label side up), and that it’s clean and not damaged. See Using and taking care of discs on page 78 for information on cleaning discs.

If a disc loaded correctly won’t play, it’s probably an incompatible format or disc type, such as DVD-ROM. See General disc compatibility on page 9 for more on disc compatibility.

I have a widescreen TV so why are there black bars at the top and bottom of the screen when I play some discs?

Some movie formats are such that even when played on a widescreen TV, black bars are necessary at the top and bottom of the screen. This is not a malfunction.

I have a standard (4:3) TV and set the system to show widescreen DVDs in pan & scan format, so why do I still get black bars top and bottom with some discs?

Some discs override the display preferences of the system, so even if you have 4:3 (Pan & Scan) selected, those discs will still be shown in letterbox format. This is not a malfunction.

Why can’t I hear DVD-Audio and SACD audio through the digital outputs?

DVD-Audio and SACD audio is only available through the analog outputs. This is not a malfunction.

My DVD-Audio disc starts playing, but then suddenly stops!

The disc may have been illegally copied.

DVD disc menus

Many DVD-Video and DVD-Audio discs contain menus from which you can select what you want to watch or listen to. They may give access to additional features, such as subtitle and audio language selection, or special features such as slideshows. See the disc packaging for details.

Sometimes DVD menus are displayed automatically when you start playback; others only appear when you press DVD MENU or

TOP MENU.

Some DVD-Audio discs feature a bonus group. To access this group you have to input a password which you can find on the disc packaging. See page 69 for more information.

03

Español Nederlands Deutsch Français Italiano English

25

En

03 Getting started

DVD MENU RETURN

 

ENTER

MUTE

SOUND

MASTER

VOLUME

TV CONTROL

 

CH

 

INPUT

 

VOL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BASS MODE

DIALOGUE

VIRTUAL SB

 

AUTO

SURROUND

ADVANCED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROGRAM

 

 

REPEAT

 

 

RANDOM

 

 

AUDIO

SUBTITLE

ANGLE

 

 

 

 

 

 

 

 

 

 

 

 

 

ZOOM

TOP MENU

 

HOME

 

 

 

MENU

 

1

 

 

2

 

 

3

 

 

 

 

SYSTEM

 

TESTTONE

CH LEVEL

 

SETUP

 

4

 

 

5

 

 

6

 

 

 

 

DIMMER

 

QUIET/

 

 

TIMER/

 

 

 

MIDNIGHT

 

CLOCK

 

7

 

 

8

 

 

9

 

 

 

 

 

 

 

FOLDER–

FOLDER+

 

CLR

 

 

0

 

 

ENTER

 

 

 

MAIN

SUB

ROOM SETUP

 

 

 

 

 

 

 

 

 

 

 

 

Button What it does

TOP MENU Displays the ‘top menu’ of a DVD disc—this varies with the disc.

DVD

Displays a DVD disc menu—this

MENU

varies with the disc and may be

 

the same as the ‘top menu’.

 

 

 

Moves the cursor around the

 

screen.

 

 

ENTER

Selects the current menu option.

 

 

RETURN

Returns to the previously

 

displayed menu screen. On

 

some DVD-Audio discs featuring

 

browsable pictures, press to

 

display the browser screen.

 

 

Numbers

Highlights a numbered menu

(MAIN)

option (some discs only). Press

 

ENTER to select (or wait a few

 

seconds).

 

 

Video CD/Super VCD PBC menus

Some Video CD/Super VCDs have menus from which you can choose what you want to watch. These are called PBC (Playback control) menus.

You can play a PBC Video CD/Super VCD without having to navigate the PBC menu by

pressing

(stop) then starting playback

using a number button to select a track,

rather than

(play) (or

 

 

 

on the top panel).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD MENU

 

 

 

 

 

RETURN

 

 

 

 

 

 

 

 

TUNE+

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ST–

 

 

 

ST+

 

 

 

 

 

 

 

 

ENTER

 

 

 

 

 

 

 

 

 

 

MUTE

TUNE–

 

 

SOUND

 

 

 

 

 

 

 

 

MASTER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VOLUME

 

 

 

 

 

 

 

 

 

 

 

 

 

TV CONTROL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH

 

INPUT

 

 

VOL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BASS MODE

DIALOGUE

VIRTUAL SB

 

 

 

 

AUTO

SURROUND

ADVANCED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROGRAM

REPEAT

RANDOM

 

 

 

 

AUDIO

SUBTITLE

 

ANGLE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ZOOM

TOP MENU

 

HOME

 

 

 

 

 

 

MENU

 

 

 

 

 

1

 

 

2

 

 

3

 

 

 

 

 

 

 

SYSTEM

TESTTONE

CH LEVEL

 

 

 

 

SETUP

 

 

 

 

4

 

 

5

 

 

 

6

 

 

 

 

 

 

 

DIMMER

QUIET/

 

TIMER/

 

 

 

 

MIDNIGHT

 

CLOCK

 

 

 

 

7

 

 

8

 

 

 

9

 

 

 

 

 

 

 

 

 

 

 

FOLDER–

FOLDER+

 

 

 

 

CLR

 

0

 

 

 

ENTER

 

 

 

 

 

 

 

MAIN

SUB

ROOM SETUP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

26

En

Getting started

Button

What it does

RETURN Displays the PBC menu.

Numbers Selects a numbered menu option.

Displays the previous menu page (if there is one).

Displays the next menu page (if there is one).

ENTER Press to select highlighted menu option.

Listening to the radio

The tuner can receive both FM and AM broadcasts, and lets you memorize your favorite stations so you don’t have to manually tune in every time you want to listen.

 

STANDBY/ON

 

CD

FM/AM

L1/L2

DVD

TUNER TV

LINE

DISPLAY

 

OPEN CLOSE

DVD MENU

 

RETURN

 

TUNE+

 

ST–

 

ST+

 

ENTER

 

MUTE

TUNE–

SOUND

MASTER

VOLUME

TV CONTROL

 

CH

INPUT

 

VOL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BASS MODE

DIALOGUE

VIRTUAL SB

 

AUTO

SURROUND

ADVANCED

 

 

 

 

 

 

 

 

 

 

 

 

PROGRAM

 

REPEAT

RANDOM

 

AUDIO

SUBTITLE

 

ANGLE

 

 

 

 

 

 

 

 

 

 

 

ZOOM

TOP MENU

 

HOME

 

 

 

 

MENU

 

 

 

1

 

2

 

 

3

 

 

 

 

SYSTEM

 

TESTTONE

CH LEVEL

 

SETUP

 

4

 

5

 

 

6

 

 

 

 

DIMMER

QUIET/

 

 

TIMER/

 

 

 

 

MIDNIGHT

 

CLOCK

 

7

 

8

 

 

9

 

 

 

 

 

 

FOLDER–

FOLDER+

 

CLR

 

0

 

 

ENTER

 

 

 

 

MAIN

SUB

ROOM SETUP

 

 

 

 

 

 

 

 

 

 

1If the system isn’t already on, press STANDBY/ON to switch on.

2Press TUNER to switch to the tuner, then press repeatedly to select the AM or FM band.

The display indicates the tuner band and the frequency.

3Tune to a frequency.

There are three tuning modes—manual, auto, and high-speed:

03

Español Nederlands Deutsch Français Italiano English

27

En

03 Getting started

Manual tuning: Press TUNE +/– repeatedly to change the displayed frequency.

Auto tuning: Press and hold TUNE +/– until the frequency display starts to move, then release. The tuner will stop on the next station it finds. Repeat to search for other stations.

High-speed tuning: Press and hold

TUNE +/– until the frequency display starts to move rapidly. Keep the button held down until you reach the frequency you want. If necessary, fine tune the frequency using the manual tuning method.

Improving poor FM reception

If you’re listening to an FM station in stereo but the reception is weak, you can improve the sound quality by switching to mono.

1Tune to an FM radio station.

2Press SYSTEM SETUP.

3Use the / (cursor left/right) buttons to choose ‘FM Mode?’ then press ENTER.

4Use the / (cursor up/down) buttons to select ‘FM Mono’ then press ENTER.

The mono indicator () lights when the tuner is in mono reception mode.

Select FM Auto above to switch back to auto-

stereo mode (the stereo indicator () lights when receiving a stereo broadcast).

Memorizing stations

You can save up to 30 station presets so that you always have easy access to your favorite stations without having to tune in manually each time.

 

STANDBY/ON

CD

FM/AM

L1/L2

DVD

TUNER TV

LINE

DISPLAY

 

OPEN CLOSE

DVD MENU

 

RETURN

 

TUNE+

 

ST–

 

ST+

 

ENTER

 

MUTE

TUNE–

SOUND

MASTER

VOLUME

TV CONTROL

 

CH

INPUT

 

VOL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BASS MODE

DIALOGUE

VIRTUAL SB

 

AUTO

SURROUND

ADVANCED

 

 

 

 

 

 

 

 

 

 

 

 

PROGRAM

 

REPEAT

RANDOM

 

AUDIO

SUBTITLE

 

ANGLE

 

 

 

 

 

 

 

 

 

 

 

ZOOM

TOP MENU

 

HOME

 

 

 

 

MENU

 

 

 

1

 

2

 

 

3

 

 

 

 

SYSTEM

 

TESTTONE

CH LEVEL

 

SETUP

 

4

 

5

 

 

6

 

 

 

 

DIMMER

QUIET/

 

 

TIMER/

 

 

 

 

MIDNIGHT

 

CLOCK

 

7

 

8

 

 

9

 

 

 

 

 

 

FOLDER–

FOLDER+

 

CLR

 

0

 

 

ENTER

 

 

 

 

MAIN

SUB

ROOM SETUP

 

 

 

 

 

 

 

 

 

 

1 Tune to an AM or FM radio station.

For the FM band, select mono or auto-stereo reception as necessary. This setting is saved along with the preset.

28

En

Getting started

2Press SYSTEM SETUP.

3Use the / (cursor left/right) buttons to choose ‘St. Memory?’ then press ENTER.

4Use the / (cursor up/down) buttons to select the station preset you want.

There are 30 preset locations; each can store one station preset.

5Press ENTER to save the station preset.

If the system is unplugged from the power supply completely, saved stations will remain for several days, after which you’ll have to save them again.

Listening to station presets

1Make sure the TUNER function is selected.

2Use the ST +/– buttons to select a station preset.

Listening to other sources

You can connect up to four external sources (TV, satellite receiver, etc.) to this system, including one digital source. See also

Connecting auxiliary components on page 72.

 

STANDBY/ON

 

CD

FM/AM

L1/L2

DVD

TUNER TV

LINE

DISPLAY

 

OPEN CLOSE

1If the system isn’t already on, press STANDBY/ON to switch on.

Also make sure that the external source (TV, satellite receiver, etc.) is switched on.

2Select the source you want to listen to.

Press TV to select the TV input, or use the LINE (L1/L2) button to select the LINE 1 ANA, LINE1 DIG or LINE 2 ANA input.

3If necessary, start playback of the external source.

03

Español Nederlands Deutsch Français Italiano English

29

En

04 Home theater sound

Chapter 4

Home theater sound

Using this system you can enjoy listening to sources, analog or digital, in either stereo or surround sound.

Auto listening mode

The Auto listening mode is the simplest way to listen to any source as it was mastered: the output from the speakers mirrors the channels in the source material.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BASS MODE

DIALOGUE

VIRTUAL SB

 

 

AUTO

SURROUND

ADVANCED

 

 

 

 

 

 

 

 

 

 

 

 

 

PROGRAM

 

 

REPEAT

RANDOM

 

AUDIO

 

SUBTITLE

 

ANGLE

 

 

 

 

 

 

 

 

 

 

 

 

ZOOM

TOP MENU

 

HOME

 

 

 

 

MENU

 

 

 

1

 

 

 

2

 

 

3

 

 

 

SYSTEM

 

TESTTONE

CH LEVEL

 

SETUP

 

4

 

 

 

5

 

 

6

 

 

 

DIMMER

 

 

QUIET/

 

 

TIMER/

 

 

 

MIDNIGHT

 

CLOCK

 

7

 

 

 

8

 

 

9

 

 

 

 

 

 

FOLDER–

FOLDER+

 

CLR

 

 

 

0

 

 

ENTER

 

 

 

MAIN

 

SUB

ROOM SETUP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Press AUTO to select the ‘Auto’ listening mode.

If the source is Dolby Digital or DTS, the 2 DIGITAL or DTS indicator on the display unit lights.

Any previously active Dolby Pro Logic or Advanced Surround mode is canceled when Auto listening mode is selected.

Listening in surround sound

You can listen to any source—stereo or multichannel, analog or digital—in surround sound. Surround sound is generated from stereo sources (except SACD and DVD-Audio) using one of the Dolby Pro Logic decoding modes.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BASS MODE

DIALOGUE

VIRTUAL SB

 

 

AUTO

SURROUND

ADVANCED

 

 

 

 

 

 

 

 

 

 

 

 

 

PROGRAM

 

 

REPEAT

RANDOM

 

AUDIO

 

SUBTITLE

 

ANGLE

 

 

 

 

 

 

 

 

 

 

 

 

ZOOM

TOP MENU

 

HOME

 

 

 

 

MENU

 

 

 

1

 

 

 

2

 

 

3

 

 

 

SYSTEM

 

TESTTONE

CH LEVEL

 

SETUP

 

4

 

 

 

5

 

 

6

 

 

 

DIMMER

 

 

QUIET/

 

 

TIMER/

 

 

 

MIDNIGHT

 

CLOCK

 

7

 

 

 

8

 

 

9

 

 

 

 

 

 

FOLDER–

FOLDER+

 

CLR

 

 

 

0

 

 

ENTER

 

 

 

MAIN

 

SUB

ROOM SETUP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Press SURROUND repeatedly to select a listening mode (or press SURROUND then use the / (cursor up/down) buttons).

The listening mode choices that appear in the display will vary according to the type of source that’s playing.

Auto – Auto listening mode (see above)

Dolby Digital / DTS – Dolby Digital or DTS decoding (depending on the source). For a multichannel source, this will be the same as Auto.

Pro Logic – 4.1 channel surround sound for use with any two-channel source

PL II Movie – Pro Logic II 5.1 channel surround sound, especially suited to movie sources, for use with any twochannel source

30

En

Loading...
+ 162 hidden pages