Files for
Size:
1.66 Mb
Download

PORTABLE DVD PLAYER

PDV-LC10

(with liquid crystal display)

PDV-10

Operating Instructions

INTRODUCTION

IMPORTANT

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION:

The exclamation point within an

TO PREVENT THE RISK OF ELECTRIC

equilateral triangle is intended to alert

SHOCK, DO NOT REMOVE COVER (OR

the user to the presence of important

BACK). NO USER-SERVICEABLE

operating and maintenance (servicing)

PARTS INSIDE. REFER SERVICING TO

instructions in the literature

QUALIFIED SERVICE PERSONNEL.

accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

THE POWER ON/OFF/HOLD SWITCH IS

SECONDARY CONNECTED AND THEREFORE

DOES NOT SEPARATE THE UNIT FROM

MAINS POWER IN THE STANDBY POSITION.

2

En

CONGRATULATIONS ON YOUR PURCHASE OF THIS FINE PIONEER PRODUCT.

Pioneer is on the leading edge of DVD research for consumer products and this unit incorporates the latest technological developments.

We are sure you will be fully satisfied with the DVD player.

Thank you for your support.

Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.

• This player is not suitable for commercial use.

This product incorporates copyright protection technology that is protected by method claims of certain U. S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be Authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision corporation. Reverse engineering or disassembly is prohibited.

English

INTRODUCTION

3

En

INTRODUCTION

Features of This Player

Main Features

Convenient DVD functions

Various DVD sound options

Choice of the desired subtitle language

With this player you can select one of several subtitle languages recorded on the DVD. (Pages 63 and 75)

Subtitle :1 English

Subtitle :2 Spanish

HELLO!

HOLA!

Choice of the desired audio language

With this player you can select one of several audio languages recorded on the DVD. (Pages 64 and 77)

 

Dolby Digital

 

 

Dolby Digital

Audio

: 1 English

5.1CH

 

Audio

: 2 Spanish

5.1CH

HELLO

HOLA

Choice of the desired angle

With this player you can select one of several viewing angles recorded on the DVD. (Page 104)

ANGLE : 2/4

ANGLE

: 3/4

Dolby Digital/DTS compatibility - for the powerful sound of movie theaters *1)

DVDs of movies or music with sound recorded on 5.1 channels can be played with a rich sense of presence. (Page 72)

1

24 bit/96 kHz compatibility for even higher sound quality than CDs

This player offers direct 96 kHz signal output, providing high quality stereo sound. (Page 73)

*1):A separately sold compatible amplifier/ decoder, etc., are required for playing Dolby Digital*/DTS** sound.

*Manufactured under license from Dolby Laboratories. “Dolby”, “AC–3” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. © 1992-1997 Dolby Laboratories. All rights reserved.

**“DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc. Manufactured under license from

4 Digital Theater Systems, Inc.

En

 

 

Features of This Player

 

 

 

Setup screen with top priority on easy

 

Other features

operation

 

Quick setup screen settings

 

 

Interactive system setup

The Setup Navigator function automatically sets the disc language and settings related to connections with a TV and amplifier. (Page 42)

Audio1 2 Video Language General Other

 

Setup Navigator

 

 

 

 

TV Connection

 

 

 

 

TV Type

Widescreen (16:9)

 

 

 

Standard (4:3)

 

i

Widescreen TV 16:9 aspect ratio

 

 

Move

ENTER

Select

SETUP

Exit

On-screen information helps you make the settings on the setup screen.

(Page 58)

Selection of screen size at the touch of a button

The screen size of the PDV-LC10’s wide 7-inch thin liquid crystal display can be switched between normal, full, zoom and off at the touch of a button. (Page 19)

Setup screen settings can be made and checked during playback

Choice of two system setup modes

This player offers a choice of two system setup modes: “Basic” for easy setup and “Expert” for more advanced settings. (Pages 57 and 62)

Unlike previous players, on this player the setup screen can be displayed and the settings made or checked while the disc is playing, providing greater convenience.

Audio1 2 Video Language General Other

 

 

Setup Menu Mode

Expert

 

 

 

Setup Navigator

Basic

 

 

 

Parental Lock

Level8

 

 

i

Detailed setup mode

 

 

 

Move

ENTER

Select

SETUP

Exit

Battery pack for outdoor use (PDV-LC10 only)

The battery pack (PDV-BT10) is also commercially available.

Energy-saving design

This player is designed to use minimal electricity when in the standby mode. Refer to page 125 for the power consumption in the standby mode.

English

INTRODUCTION

5

En

Table of Contents

INTRODUCTION

INTRODUCTION

 

Features of This Player ......................

4

Cautions on Using this Player ............

8

Precautions for Battery Pack Operation . 10

Types of Discs Playable on this Player ...

11

Using These Operating

 

Instructions ...................................

14

BEFORE USING

 

Checking the Accessories ...................

15

Remote Control Unit and Main Unit

 

Preparations .........................................

16

Part Names and Functions ...................

19

Connecting the Player to Other

 

Components ..........................................

29

Connecting to a TV ..........................

29

Connecting to a Dolby Digital/DTS/

 

MPEG decoder or an amplifier with a

built-in decoder ..............................

30

Connecting to a digital amplifier that is

not Dolby Digital/DTS/MPEG-

 

compatible .....................................

31

Connecting to a Dolby Pro-Logic

 

decoder/stereo device...................

32

Connecting to active speaker systems ..

33

Connecting headphones ..................

34

Connecting to a video component, etc.

(PDV-LC10 only) ............................

35

Using the Battery....................................

36

Recharging the battery pack ............

36

Attaching the battery pack and player ....

38

Removing the player and battery pack ...

40

BASIC OPERATIONS

 

Turning On the Power ............................

41

Making Settings with the Setup

 

Navigator ..............................................

42

6

Starting the Setup Navigator ...........

42

Setting the on-screen display language

......................................................

43

Setting the type of TV to be connected

......................................................

44

Setting the type of amplifier to be

 

connected (digital jack) ..................

45

Setting the type of amplifier to be

 

connected (amplifier’s 96 kHz

 

compatibility) .................................

46

Quitting the Setup Navigator ...........

47

Playback Functions ...............................

48

Loading discs ...................................

48

Playing discs ....................................

49

If a menu screen appears ................

50

Stopping the disc .............................

52

Pausing the disc ..............................

52

Scanning forward and backward .....

53

Returning to the previous chapter or

 

track ..............................................

54

Moving ahead to the next chapter or

 

track ..............................................

54

Removing discs ...............................

55

Turning Off the Power ...........................

56

ADVANCED OPERATIONS

 

Setup Screen Operations .....................

57

Starting up the setup screen ...........

57

Names of parts on the setup screen

 

......................................................

58

Items that can be set and items that

 

cannot be set depending on the type

of disc ............................................

59

Making settings using the setup screen

......................................................

60

Setting the expert mode ..................

62

En

Table of Contents

Various Language and Subtitle Settings

................................................................

63

Setting the on-screen display language

......................................................

63

Setting the subtitle language ...........

63

Setting the audio language ..............

64

Setting the DVD menu language .....

64

Setting the subtitle display ..............

65

When ‘Other’ is selected for the

 

subtitle, audio or DVD language ....

66

Setting the audio language and subtitle

preferences ...................................

68

Language setting when subtitles appear

automatically .................................

68

Various Video Settings ..........................

69

Setting the TV screen size ...............

69

Moving the position of the on-screen

display ...........................................

71

Setting the picture quality ................

71

Various Digital Signal Settings ...........

72

Dolby Digital signal settings .............

72

DTS signal settings ..........................

72

96 kHz PCM signal setting...............

73

MPEG signal setting ........................

73

Adjusting the quality of Dolby Digital

 

signals ...........................................

74

Stopping the picture (still frame mode)

......................................................

90

Switching the still frame mode ........

90

Playing one step at a time

 

(step-by-step playback) ..................

91

Viewing in slow motion ...................

92

Repeat play ......................................

93

Playing in random order

 

(random play) .................................

95

Programmed playback (DVDs) .........

96

Programmed playback (Video CDs and

CDs) ..............................................

98

Editing programs .............................

99

Selecting the DVD’s angle

 

(multi-angle) .................................

104

Turning the display of the angle mark on

and off .........................................

105

Setting the Parental Lock Level .....

106

Selecting the background color .....

109

Resuming playback from a specific

 

position (last memory) .................

111

Storing settings for often viewed DVDs

(condition memory) .....................

112

Viewing the disc information .........

113

Setting the screen saver ................

117

Turning the on-screen display on and off

....................................................

117

Restoring all the settings to the factory

default values ..............................

118

English

INTRODUCTION

ADVANCED FUNCTIONS

 

Switching the subtitle language during

playback ........................................

75

Switching the audio language during

 

playback ........................................

77

Switching the audio mode ...............

79

Searching for a specific scene .........

82

Selecting the menu number on video

CDs with PBC ...............................

89

ADDITIONAL INFORMATION

 

Troubleshooting .............................

119

Cautions on Use ............................

121

Language Code List .......................

123

Specifications ................................

125

Terms .............................................

126

7

En

INTRODUCTION

Cautions on Using this Player

Do not move the player during playback

During playback, the disc spins at high speed, so do not lift or move the player. Doing so may damage the disc.

When transporting the player

Be sure to remove the disc and close the lid when transporting the player. Also slide the power switch to turn off the power, then unplug the power cord once “OFF” on the display window turns off and the power indicator (red) lights. Transporting the player with a disc loaded may result in damage.

Place of installation

•Select a stable place near the TV or stereo system to which you are going to connect the player.

•Do not place the player on top of a TV or color monitor. Install the player away from cassette decks or other devices which are easily affected by magnetic forces.

Do not place objects on top of the player

Do not place any objects on top of the player.

Turn off the power when not using the player

Depending on the TV reception conditions, stripes may appear on the TV screen when the TV is turned on while the player’s power is on. This is not a malfunction of the player or the TV. If this should happen, turn off the player’s power. Noise may also be generated in the sound of a radio when the player’s power is on.

Special note regarding use of player in vehicles

We strongly advise against using the player while driving.

Most countries and states have laws which prohibit or severely restrict the use of the player in vehicles while driving.

Do not leave the player or the battery pack in places where the temperature is extremely low (about –10°C or lower) or extremely high (about 60°C or higher), such as inside the passenger cabin or trunk in midsummer. Doing so may warp the outer case or reduce the performance or quality of the battery pack.

When carrying on planes

Heed the airline company’s rules.

When carrying in hospitals

Heed the hospital’s rules.

8

En

Cautions on Using this Player

Cleaning the player

Copyrights

Normally clean the player using a soft, dry cloth. For tough dirt, apply some neutral detergent diluted in 5 to 6 parts water to a soft cloth, wring out thoroughly, wipe off the dirt, then wipe off the player with a dry cloth. Note that alcohol, thinner, benzene, insecticides, etc., may cause the print or coating to peel off. Also avoid leaving rubber or plastic products in contact with the player for long periods of time, as this may damage the cabinet. When using chemically treated cloths, read the cloth’s instructions carefully. Always unplug the power cord from the power outlet before cleaning the player.

To clean dirt off the liquid crystal display, wipe the display gently with a soft, dry cloth (such as an eyeglass cleaning cloth). Note that leaving water droplets on the display for long periods of time may result in discoloration or stains. For tough dirt, use a commercially available liquid crystal display cleaner.

Unauthorized duplication, broadcast, public performance or rental of discs is prohibited by law.

English

INTRODUCTION

9

En

Precautions for Battery Pack Operation (PDV-LC10)

Operation of the battery pack

 

• Charge the battery pack fully before using

 

it for the first time.

 

• When the surrounding temperature is

INTRODUCTION

high, the battery pack may sometimes be

unusable due to activation of protection

 

 

circuitry.

 

• When the portable DVD player is powered

 

from the battery pack and if the player has

 

not been operated for about 5 minutes

 

with the power switched on, the player

 

will turn off automatically. (Auto power

 

OFF)

 

• During battery pack operation, the display

 

of the portable DVD player may become

 

dim. This is to save power and is not a

 

malfunction.

 

• The battery pack becomes hot after use

 

and the portable DVD player also becomes

 

hot during use. This is not malfunction.

 

• When the battery pack is not to be used

 

for a long period, be sure to remove it

 

from the portable DVD player. If the

 

battery pack is left attached, continual

 

flow of weak current renders it

 

overdischarged and eventually unusable

 

even when you try to charge it later.

 

• If the portable DVD player is switched on

 

while the battery pack is not fully charged,

 

the operation may sometimes be

 

unstable. Be sure to charge the battery

 

pack fully before use.

10

En

Storage

The battery pack should be stored under an surrounding temperature between 15 and 25°C. Avoid storing it under extremely low temperatures, in a place with high temperature and high humidity or in a place subject to soot, etc.

When the battery pack is stored for a long period, at least once an year it is recommended to discharge it fully on the portable DVD player, recharge it fully and store it again.

Service life and disposal

When the charging time or available operation time becomes extremely short, the battery may be reaching the end of its life. The battery pack can be used for about 300 cycles of recharging and operations.

To dispose of a used battery pack, wrap a piece of tape around the terminal section and treat it in compliance with your local regulations.

To extend the service life of the battery

pack

The battery pack incorporates nickelhydrogen cells. To extend its service life, it is recommended to discharge it fully before every recharging.

Types of Discs Playable on this Player

•The discs listed on the table below can be played on this player without an adapter.

•Discs other than the ones listed below cannot be played on this player.

•The marks shown on the table below are indicated on the disc’s label, package or jacket.

•To prevent malfunction, etc., do not use 8 cm adapters (for CDs).

Types of playable

 

 

 

discs and their

Diameter/Playable sides

Playback time

marks

 

 

 

 

DVD video

 

(MPEG 2 format)

 

12 cm/single-

1 layer

133 minutes (4.7 GB)

 

sided

2 layer

242 minutes (8.5 GB)

DVD VIDEO

12 cm/double-

1 layer

266 minutes (9.4 GB)

 

sided

2 layer

484 minutes (17 GB)

 

DVD video

 

(MPEG 2 format)

 

8 cm/single-

1 layer

41 minutes

 

sided

2 layer

75 minutes

 

8 cm/double-

1 layer

82 minutes

 

sided

2 layer

150 minutes

VIDEO CD

Video CD

 

(MPEG 1 format)

12 cm/single-sided

74 minutes

 

 

Video CD single

 

(MPEG 1 format)

 

8 cm/single-sided

20 minutes

CD

CD

 

74 minutes

12 cm/single-sided

 

 

 

 

CD single

 

20 minutes

 

8 cm/single-sided

 

NOTE:

 

 

 

To prevent malfunction, do not play discs other than the ones listed above (for example DVD audio discs, DVD-ROMs, CD-ROMS, DVDs with region numbers other than this player’s region number (see page 127), etc.).

English

INTRODUCTION

11

En

INTRODUCTION

Types of Discs Playable on this Player

Marks indicated on DVDs

DVD discs or packages include the marks shown below. These marks indicate the type of video or audio signals recorded on the disc and the functions that can be used.

Mark

Meaning

2

 

Indicates the number of audio tracks.

 

 

3

 

Indicates the number of angles.

16 : 9

LB

Indicates the selectable picture aspect ratio.

 

 

2

ALL

Indicates the playable region number. This player's region number

 

 

is indicated on the bottom of the player.

Disc structure

CDs and video CDs are divided in units called tracks. (Generally one track corresponds to one song. Tracks are sometimes further divided into indexes.)

CDs

Track 1

 

Track 2

 

Track 3

 

Track 4

Track 5

 

 

 

 

 

 

 

 

 

 

Track 1

Track 2

Track 3

Track 4

Video CDs

12

En

Types of Discs Playable on this Player

DVDs are divided in units called titles, which are further divided in chapters. They also include menu screens that do not belong to any title. With movies, normally one movie corresponds to one title. On karaoke discs, one song corresponds to one title. Some discs are not divided in this way, however, so be careful when using the search and programming functions.

 

 

 

 

Title 1

 

 

 

 

Title 2

 

DVDs

Chapter 1

 

 

 

Chapter 1

 

 

 

 

 

Chapter 2

 

 

 

 

Chapter 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Disc operation

With some DVDs it is intentionally prohibited to change the operating method or to perform certain operations. Because of this, operating procedures may differ for different discs and for some discs certain operations may not be possible.

With Pioneer DVD players, a mark indicating the operation is prohibited (“prohibition mark”) is displayed on the screen when the user attempts to perform a prohibited operation. In addition, with discs on which interactive operations are possible on menus or during playback, the data on the disc is branched rather than continuous, so some operations (repeat, programming, etc.) may not be possible. In such cases, Pioneer DVD players display a prohibition mark.

Disc prohibition mark

Player prohibition mark

English

INTRODUCTION

13

En

INTRODUCTION

Using These Operating Instructions

Be sure to read these operating instructions before using the player to ensure you take maximum advantage of all the functions this player offers. Note that these operating instructions describe the operation of two players, the PDVLC10 portable DVD player with liquid crystal display and the PDV-10 portable DVD player. Some descriptions use illustrations of the type equipped with a liquid crystal display.

When this player is connected to a TV or AV amplifier, the setup screen must be displayed and the various settings must be switched according to the connected equipment. This player is equipped with an extremely convenient function called the “Setup Navigator” in which the disc language setting and connection settings are set automatically when the user answers questions in interactive fashion. (Page 42)

With DVDs it is possible to switch the subtitle and audio languages and to select the desired sound mode from among multiple sound tracks (Dolby Digital, DTS, etc.). The setup screen is where these settings are stored temporarily. This player is equipped with two levels of setup screens, “Basic” and “Expert”, which can be selected as necessary according to the viewing environment and the frequency of use of the different setting items. (Page 57)

In order to take full advantage of the many functions this player has to offer, be sure to store these operating instructions in a readily accessible place.

14

En

Checking the Accessories

After unpacking the player, check that all the accessories listed below are included.

AC adapter

Power cord

<Flat blade 2 - pin AC plug model>

<Round blade 2 - pin AC plug model>

(Either of the two power cords above is supplied.)

CU-PDV003 card remote control unit (with lithium battery)

AV cable (4-pole miniplug - RCA x 3)

S-Video cable (3 pole miniplug - S plug)

PDV-LC10 only:

Battery case

Charger

Battery pack

Power cord

<Flat blade 2 - pin AC plug model>

<Round blade 2 - pin AC plug model>

(Either of the two power cords above is supplied.)

Operating instructions (this manual)

English

USING BEFORE

15

En

USING BEFORE

Remote Control Unit and Main Unit Preparations

Notes on using the remote control unit

Film

Before using the remote control unit for the first time, pull out the film from the back of the remote control unit.

Do not drop or step on the remote control unit or subject it to shocks. Doing so may damage it.

Note that it may not be possible to operate the remote control unit if there are obstacles between it and the remote sensor.

Do not expose the remote sensor to strong light. Doing so may make operation impossible.

Use the remote control unit within the specified operating range.

Replacing the battery

1 Insert your fingernails into a and

3 Fit the battery holder back into

b on the diagram below, press a

place.

in the direction of the arrow, then

 

pull out the battery holder.

 

Note:

To prevent leakage of fluid from the lithium battery, remove the battery when not using the remote control unit for long periods of time (one month or more). If the fluid should leak, carefully wipe any fluid out of the battery case, then insert a new lithium battery.

2Remove the old battery, then insert the new battery into the battery holder with the ªside facing upwards.

CR2025

Lithium battery (CR2025)

16

En

WARNING

(lithium battery)

Keep out of the reach of children.

Contact a physician immediately if a battery should be swallowed.

Do not take apart, dispose of in flames, charge, heat, solder or short-circuit.

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.

Discard used batteries according to the manufacturer’s instructions.

Remote Control Unit and Main Unit Preparations

Remote control unit operating range

The remote control unit will operate within a distance of approximately 4 meters.

30°

30°

Approxæ4 m .

4 meters

Note:

Most of the player’s operations can be performed from the remote control unit. Some operations, however, can only be performed from the main unit.

English

Removing the player’s shipping spacer

Remove the shipping spacer before turning on the player’s power.

1For the PDV-LC10, gently lift the liquid crystal display in the direction of the arrow.

2 Slide the OPEN switch to the

#side and open the lid.

The lid pops slightly open.

3 Lift the lid to open it.

4Gently remove the shipping spacer.

USING BEFORE

OPEN#

Note:

 

Be sure to slide the OPEN switch to open

 

the lid. Forcing the lid open may damage

 

the player. Also, do not force the lid beyond

 

the fully opened position. Doing so may

17

damage it.

 

En

USING BEFORE

Remote Control Unit and Main Unit Preparations

Setting the TV SYSTEM switch

TV SYSTEM switch

Video output changes as follows according to the playback disc‘s recorded format.

NTSC =PAL, PAL =NTSC conversion is possible on Video CDs. PAL =NTSC conversion is not possible on DVDs.

When the TV SYSTEM switch is set to the AUTO position, the disc’s format will be output as is. When a CD or disc is not loaded, the previous video output format will be selected.

T V SYS T EM

N T S C / L C D

A UTO

P A L

About MOD. (Modulation) PAL

•SHRINK

Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch vertical amplitude, resulting in a display without vertical shrinkage.

•If your PAL TV does not have a V-Hold control, you may not be able to view NTSC disc because the picture may roll. If the TV has a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands at the top and bottom of the screen. This is not a malfunction; it is caused by the NTSC =PAL conversion.

PDV-LC10

Position of TV

Liquid crystal

DVD

 

 

 

Video CD

CD, No disc

SYSTEM switch

display

NTSC discs

 

PAL discs

NTSC discs

PAL discs

 

 

 

 

 

 

 

NTSC/LCD

Power on

NTSC

 

 

 

 

NTSC

NTSC

NTSC

 

 

 

 

AUTO

Power off

NTSC

 

PAL

NTSC

PAL

NTSC or PAL

PAL

Power off

MOD.PAL

 

PAL

MOD.PAL

PAL

PAL

Note:

With the PDV-LC10, when the TV SYSTEM switch is set to anything other than “NTSC/ LCD”, the Liquid Crystal Display (LCD) is turned off.

18

En

Part Names and Functions

Liquid crystal display (PDV-LC10 only)

The PDV-LC10 portable DVD player is equipped with a liquid crystal display.

English

1

2

1 Liquid crystal display

2 Speakers

3 MONITOR button

Press this to switch the screen size. The screen size switches as follows each time the button is pressed:

=Normal =Full =Zoom =Off

(4:3) (16:9)

COLOR BRIGHT MONITOR

5 4 3

Gently lift the liquid crystal display in the direction of the arrow shown on the diagram at the left.

When the button is pressed for approximately 1 second, the picture turns upside-down.

Press the button again to turn the picture right-side up.

4 BRIGHT control

Use this to adjust the liquid crystal display’s brightness.

5 COLOR control

Use this to adjust the color depth.

USING BEFORE

19

En

Part Names and Functions

Main unit control section

ÛN¿Ç ,?

PORTABLE DVD PLAYER

 

 

 

 

CAN/

SLO

 

 

 

 

 

 

IP/S

 

 

 

 

 

 

SK

 

W

 

 

 

 

1

 

 

¡

 

 

 

1

 

4

 

¢

6

 

 

 

 

5

 

 

 

 

2

 

 

 

 

 

7

 

ENTER

5

 

5

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

MENU

 

SETUP

 

8

 

 

 

TOP

 

 

4

 

MENU

 

 

 

 

 

 

 

 

 

7

 

 

5

 

 

 

 

 

9

 

 

RETURN

STOP

 

 

 

 

 

 

 

 

RESUME

 

 

 

96 kHz

 

 

 

 

ANGLE

 

BEFORE

 

 

 

 

 

 

 

p

1 Cursor buttons (5, , 2and 3)

 

USING

Press these to select menu and top

 

 

 

 

 

 

 

 

menu items or to set items on the setup screen.

2 ENTER button

Press this to enter settings.

3 MENU button

Press this to display the DVD’s menu screen.

4 TOP MENU button

Press this to display the DVD’s top menu screen.

5 RETURN button ( )

Press this to return to the previous item.

6 Previous/next buttons (4and ¢)

Use these buttons to scan forward or backward through pictures or sound (page 53), to search for the beginnings of tracks or chapters (page 54), for step-by-step playback

20 (page 91) and for slow playback (page 92).

4 : Reverse direction ¢ : Forward direction

Hold scan function

Scanning is held when the previous or next button (4 or ¢) is held in for over 5 seconds. Press the play button to switch back to the play mode.

Step-by-step playback

Press the previous or next button (4 or ¢) while in the pause mode for step-by-step playback.

Slow playback

Press and hold in the previous or next button (4or ¢) while in the pause mode for slow playback.

7 Play/pause button (6)

Press this to play pictures or sound. When pressed in the play mode, the still frame (for pictures) or pause (for sound) mode is set. Press again to resume playback.

8 SETUP button

Press this to display the setup screen. The setup screen can be called out at any time, whether in the play or stop mode and regardless of the type of disc. Press the SETUP button again to turn the setup screen off after entering the settings.

9 STOP button (7)

Press this to stop the currently playing picture or sound.

p Display window

The player’s operating status is displayed here. (Page 24)

En

Main unit front panel

Part Names and Functions

English

COLOR BRIGHT MONITOR

PHONES ON/OFF HOLD

DIGITAL OUT (OPTICAL)

1

 

2

 

3

4

5

1 Lid

2PHONES/DIGITAL OUT (OPTICAL) jack

To connect stereo headphones or an amplifier, connect a stereo minijack or optical digital cable here.

3 Remote sensor

The remote control signals are received here.

4 Power ON/OFF/HOLD switch

Slide the power switch to the ON/OFF side and hold it there for at least 1 second to turn the player’s power on and off.

The hold (accidental operation prevention) function is turned on when the switch is slid to the HOLD side.

Hold function

The hold function disables the control buttons, so the currently playing picture or sound is not interrupted even if a control button is pressed accidentally during playback. “HOLD” appears on the main unit’s display window if a control button is pressed while the hold function is on. Only the power button on the remote control unit functions when the hold function is on.

5 Power indicator Off: The power is off.

Turn on the power using the main unit’s power switch.

Red: The power is set to the standby mode.

Turn on the power using the power switch on the main unit or the power button on the remote control unit. Green: The power is on.

USING BEFORE

21

En

Part Names and Functions

Main unit left side

USING BEFORE

OPEN

1

1 OPEN switch

Slide the switch in the direction of the arrow (to the right) to open the lid.

Main unit rear panel

DC IN 9V

1

1 DC IN jack

Connect the included AC adapter here.

22

En

Main unit right side

Part Names and Functions

English

VOLUME

AV-IN

AV-OUT S-VIDEO OUT

AV-IN/OUT

1

 

2

 

3

 

4

1 VOLUME control

Use this to adjust the volume of the speakers or headphones.

2Audio/video input/output selector switch (AV-IN/AV-OUT)

(PDV-LC10 only)

Select input or output according to how you are using the audio/video input/output jack (4).

•Always set to the AV-OUT side when you want to play discs.

•When set to the AV-IN side, “AV-IN” appears on the main unit’s display window.

3 S-Video output jack (S-VIDEO

OUT)

To connect the player to a TV equipped with an S-Video input jack, connect the included S-Video cable here. This jack is S2-compatible.

PDV-LC10:

4Audio/video input/output jack (AV-IN/OUT)

To connect the player to a TV, connect the included AV cable here. Select input or output with the AV-IN/AV-OUT selector switch 2.

PDV-10:

4Audio/video output jack (AVOUT)

To connect the player to a TV, connect the included AV cable here.

USING BEFORE

23

En

Part Names and Functions

Main unit display window

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

34

 

 

 

7

 

8

 

 

 

 

5

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TITLE

 

 

 

1AB PROGRAM RAND

 

OM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RESUME

96 kHz

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ANGLE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

e

 

w

 

 

1 2

 

 

 

 

 

This lights when playing discs recorded

BEFORE

in Dolby Digital.

 

 

2 TITLE

 

 

 

 

 

 

This lights when the information

USING

displayed in section w of the display is

 

 

 

 

 

title information and when in the title repeat play mode (for DVDs only).

3

This lights when in the repeat play mode.

4 1

This lights when in the single repeat play mode.

5 AB

This lights when in the AB repeat play mode.

6 PROGRAM

This lights when in the programmed play mode.

7 RANDOM

This lights when in the random play mode.

8 RESUME

24 This lights when the resume function En is on.

qp 9

9 ANGLE

This lights when the angle can be changed while playing DVDs.

p

This lights when the remaining battery power is low and flashes when the battery is about to run out of power.

q

During playback, the elapsed time of the current title (for DVDs) or track (for video CDs or CDs) is displayed here.

w

The title or chapter number (for DVDs) or the track number (for video CDs and CDs) is displayed here.

e 96 kHz

This lights when playing DVDs recorded in 96 kHz linear PCM.

Hint:

This display window also has the function of displaying the player’s operating status in real time.

Part Names and Functions

Remote control unit (frequently used buttons)

 

 

 

AUDIO

SUBTITLE

ANGLE

 

1

 

 

 

 

 

 

 

 

DISPLAY

 

 

 

MENU TOP MENU

7

 

 

 

 

 

 

SETUP

8

 

 

 

ENTER

 

 

 

 

2

PREV

 

 

 

NEXT RETURN

 

 

4

 

 

 

¢

 

2

3

REV

 

PLAY

 

FWD

CLEAR

4

1

 

3

 

¡ C

3

1

2

 

3

 

 

 

 

 

 

 

 

STEP/SLOW

PAUSE

STEP/SLOW

STOP

 

5

4 e 5

8

6

E +10

7

9

6

RANDOM REPEAT

 

PROGRAM

5

7

8

 

9

A-B

 

 

 

0

 

 

 

LAST MEM.

COND. MEM.

SEARCH MODE

 

SHIFT

Î

1 Power button

The power turns on and off when this button is pressed while the power indicator on the main unit is lit red. (Page 41)

2PREVIOUS/NEXT buttons (4 and ¢)

Use these buttons to search for the beginnings of tracks or chapters. (Page 53)

4: Reverse direction ¢: Forward direction

3 Scan buttons (1and ¡)

Use these buttons to scan forward and backward through pictures or sound. (Page 53)

1: Reverse direction ¡: Forward direction

4 PLAY button (3)

Use this button to play pictures or sound.

5 STEP/SLOW buttons

e: Press this button once for step- by-step playback in the reverse direction.

Press and hold the button in for slow playback in the reverse direction. E: Press this button once for step- by-step playback in the forward direction.

Press and hold the button in for slow playback in the forward direction.

6 PAUSE button (8)

Press this button to stop the picture or sound temporarily. (Page 52)

7 TOP MENU button

Press this button to display the DVD’s top menu screen.

8 MENU button

Press this button to display the DVD’s menu screen.

9 STOP button (7)

Press this button to stop playback of the picture or sound.

English

USING BEFORE

25

En

Part Names and Functions

Remote control unit (other buttons)

 

AUDIO SUBTITLE ANGLE

p

1

DISPLAY MENU TOP MENU

q

2

 

 

 

3

 

 

 

 

 

SETUP

w

 

 

 

ENTER

 

 

 

 

4

PREV

 

 

 

NEXT

RETURN

 

 

 

4

 

 

 

¢

e

 

 

REV

 

PLAY

 

FWD

CLEAR

 

 

 

1 1

2

3

3

¡ C

r

 

 

STEP/SLOW

PAUSE

STEP/SLOW

STOP

 

 

5

e

 

8

 

E

7

 

 

4

5

 

6

+10

t

 

6

RANDOM REPEAT

 

PROGRAM

 

7

8

 

9

0

y

 

 

 

 

 

 

A-B

 

 

 

7

LAST MEM. COND. MEM.

SEARCH MODE

u

USINGBEFORE

 

 

 

 

 

 

i

1 AUDIO button

 

 

 

 

8

SHIFT

 

 

 

 

 

 

9

 

 

 

 

 

Î

 

 

 

 

 

 

 

 

 

 

Press this button to switch the audio

 

language. (Page 77)

 

 

 

2 DISPLAY button

Press this button to display the disc information. (Page 113)

3 Cursor buttons

Use these buttons when selecting setting items to move the cursor up, down, left and right.

4 ENTER button

Press this to enter settings.

5 Number buttons

Press these buttons while pressing the 26 SHIFT button (9) to input numbers.

6 RANDOM button

Press this button to play the titles or chapters (for DVDs) or the tracks (for video CDs and CDs) in random order. (Page 95)

7 LAST MEMORY button

Use this button to store the position from which you want to start playback next. (Page 111)

8 CONDITION MEMORY button

Use this button to store the settings of frequently viewed DVDs. (Page 112)

9 SHIFT button

Press the number buttons (5) while pressing the SHIFT button to input numbers.

p ANGLE button

Press this to switch the DVD’s angle. (Page 104)

q SUBTITLE button

Press this to switch the DVD’s subtitle language. (Page 75)

w SETUP button

Press this to display the setup screen.

e RETURN button ( )

Press this to return to the previous item.

r CLEAR button

Use this to clear the programmed play, random play and repeat play settings.

En

t A-B REPEAT button

Press this button during playback to set two points and play the section between them repeatedly. (Page 94)

y PROGRAM button

Press this button to program titles or chapters (for DVDs) or tracks (for video CDs and CDs) to play them in a desired order. (Page 96)

u REPEAT button

For DVDs, use this button to play titles or chapters repeatedly. (Page 93)

For CDs, use this button to play tracks or the entire disc repeatedly. (Page 93)

i SEARCH MODE button

Press this to select the search mode. (Page 82)

Part Names and Functions

English

USING BEFORE

27

En

USING BEFORE

Part Names and Functions

Names of battery case parts and their functions (PDV-LC10 only)

23

DC IN SV

DC OUT

1

14

56

1 Player eject buttons

Press these buttons on the left and right side to detach the player.

=Removing the player and battery pack (Page 40)

2 Battery release button

Press to detach the battery pack.

=Removing the player and battery pack (Page 40)

3 Rear guide

When attaching the player to the battery case, align this guide with the guide hole on the rear of the player.

=Removing the player and battery pack (Page 40)

4 Player terminals

These supply power and signals to the player.

CAUTION:

Do not short-circuit the terminals.

5 DC IN connector

Connect the AC adapter which is provided with the player.

= AC power operation (Page 39)

6 DC OUT connector

For future use.

28

En

Connecting the Player to Other Components

Before connecting

Turn off the power of the player and the components to be connected.

Also read the operating instructions of the components to be connected.

This player is compatible with analog copy protect type copy guards. Because of this, it may not be possible to achieve a normal playback picture when the player is connected to a TV via a video deck or when recordings made on a video deck are played. Connect the player’s video output directly to the TV.

Connecting to a TV

English

Set the type of TV to be connected (16:9 or 4:3) using the procedure described under “Setting the type of TV to be connected”. (Page 44)

VOLUME

When connecting an external TV to the PDV-LC10, set the (AV-IN/AV-OUT) switch to AV-OUT (the right side).

AV-IN AV-OUT S-VIDEO OUT

AV-IN/OUT

 

Main unit right side

S-Video cable

Video/audio cable

(included)

(included)

USING BEFORE

To S-Video input jack

S-VIDEO IN

AUDIO IN

VIDEO IN

 

R

L

TV

When connecting to a TV equipped with an S-Video input jack

To video input jack (yellow)

To audio input jack (white)

To audio input jack (red)

: Signal flow

If your TV is equipped with an S-Video input jack, connect the S-Video cable (included) to achieve high quality pictures.

Note:

 

For instructions on connecting the power

29

cord, refer to page 41.

En

Connecting the Player to Other Components

Connecting to a Dolby Digital/DTS/MPEG decoder or an amplifier with a

built-in decoder

With this player, the audio settings can be used to enjoy powerful Dolby Digital, DTS or MPEG sound. Output the digital signals from the player’s digital output to a decoder or amplifier with built-in decoder. For instructions on making the audio settings, refer to “Setting the type of amplifier to be connected (digital jack)” (page 45). We recommend these connections when you are using the Pioneer VSX-D608-G, VSX-D638-G amplifier.

USING BEFORE

See page 29 for

PHONES

ON/OFF HOLD

 

details on connections

DIGITAL OUT (OPTICAL)

 

 

 

 

to the TV.

 

 

 

Main unit front panel

 

 

 

Optical digital cable (not included)

 

 

Front

 

Front speaker (left)

 

speaker

Subwoofer

Center

(right)

 

 

speaker

 

 

DIGITAL IN

 

 

 

Surround

Surround

speaker (left)

speaker (right)

: Signal flow

Pioneer VSX-D608-G, VSX-D638-G, etc.

Hint:

A compatible decoder or amplifier,

5 speakers (front left/right, center and surround left/right) and a subwoofer are required to enjoy Dolby Digital/DTS 5.1- channel sound.

30

Notes:

The CD shockproof function (for preventing skipping when playing music CDs) will not work when an optical cable is connected. Do not subject the player to shocks during playback.

With the PDV-LC10, no sound is produced from the player’s speakers when an optical cable is connected.

En

Connecting the Player to Other Components

Connecting to a digital amplifier that is not Dolby Digital/DTS/MPEG-

compatible

For instructions on making the audio settings, refer to “Setting the type of amplifier to be connected (digital jack)” (page 45).

COLOR BRIGHT MONITOR

 

 

See page 29 for details

PHONES

ON/OFF HOLD

on connections to the

DIGITAL OUT (OPTICAL)

 

TV.

 

 

Main unit front panel

 

 

Optical digital cable (not included)

To digital audio input jack

DIGITAL IN

: Signal flow

Notes:

English

USING BEFORE

Carefully check the player’s digital output settings (page 45) before connecting the player to an amplifier equipped with a digital audio input jack which is not Dolby Digital/DTS/MPEG-compatible. Playing

DVDs when the audio settings are not correct may cause strong noise which could damage your speakers.

The CD shockproof function (for preventing skipping when playing music CDs) will not work when an optical cable is connected. Do not subject the player to shocks during playback.

With the PDV-LC10, no sound is produced from the player’s speakers when an optical cable is connected.

31

En

Connecting the Player to Other Components

Connecting to a Dolby Pro-Logic decoder/stereo device

VOLUME

AV-IN

AV-OUT S-VIDEO OUT AV-IN/OUT

USING BEFORE

Main unit right side

When connecting the PDV-LC10 to an external component, set the AV-IN/ AV-OUT switch to AV-OUT (the right side).

 

S-Video cable

Video/audio cable

 

(included)

(included)

To S-Video input jack

 

 

 

To video input

To audio input jacks

S-VIDEO IN

jack

 

VIDEO IN

 

or

AUDIO IN

 

 

R

L

See page 29 for details on connections to the TV.

Hints:

The picture can be viewed when either the S-Video or video input jack is connected.

32

Dolby Pro-Logic decoder/stereo device (sold separately)

: Signal flow

When the player is connected to a Dolby Pro-Logic decoder, DVDs recorded in 5.1- channel Dolby Digital can be enjoyed in the Dolby Pro-Logic mode. A center speaker and surround speakers are required in addition to the speakers shown above in order to enjoy surround sound.

En

Connecting the Player to Other Components

Connecting to active speaker systems

English

VOLUME

AV-IN

AV-OUT S-VIDEO OUT

AV-IN/OUT

When connecting the PDV-LC10 to an external component, set the AV-IN/ AV-OUT switch to AV-OUT (the right side).

To S-Video input jack

S-VIDEO IN

VIDEO IN

or

TV

Hint:

The picture can be viewed when either the S-Video or video input jack is connected.

 

Main unit right side

 

S-Video cable

Video/audio cable

 

(included)

(included)

 

 

To audio input

BEFORE

jack

USING

jacks

 

 

To video input

Active speaker systems

: Signal flow

33

En

Connecting the Player to Other Components

Connecting headphones

Connect the headphones’ plug securely to the PHONES jack on the player’s front panel. To listen to music over the headphones, first turn the VOLUME control on the right side of the main unit to the left to lower the volume, then adjust the volume to a comfortable level. Be careful not to set the volume too high when using headphones.

COLOR BRIGHT MONITOR

Headphones

USING BEFORE

PHONES

ON/OFF

HOLD

Main unit front

DIGITAL OUT (OPTICAL)

 

 

 

 

 

panel

To PHONES jack Note:

Insert the headphones’ plug securely. No sound will be heard unless the headphones are securely connected.

VOLUME

VOLUME

2

MIN

34

AV-IN

AV-OUT S-VIDEO OUT

AV-IN/OUT

Main unit right side

Notes:

With the PDV-LC10, no sound is produced from the speakers when headphones are connected.

It is not possible to hear the sound of DTScompatible DVDs over headphones.

Strong noise is produced when DTS discs other than DVDs are played, so do not listen to such discs over headphones.

En

Connecting the Player to Other Components

Connecting to a video component, etc. (PDV-LC10 only)

When a video component, etc., is connected, the picture and sound of the component can be enjoyed on the player’s liquid crystal display and over the player’s speakers.

English

COLOR BRIGHT MONITOR

PHONES

ON/OFF HOLD

DIGITAL OUT (OPTICAL)

 

Notes:

The S-Video jack is for output only. Do not make connections to it.

The player cannot be operated when the AV-IN/AV-OUT switch is set to AV-IN (video input).

Main unit right side

 

BEFORE

AV-IN AV-OUT S-VIDEO OUT AV-IN/OUT

 

AV-IN (left side).

audio cable

USING

Set the AV-IN/

Video/

 

AV-OUT switch to

 

“AV-IN” appears on

(included)

 

the display window.

 

 

 

To analog

 

To video

audio output

 

jacks

 

output jack

 

 

 

VIDEO OUT AUDIO OUT

 

R

L

 

8 mm video

: Signal flow

 

camera, etc.

 

35

En

Using the Battery

Recharging the battery pack (PDV-LC10 only)

USING BEFORE

Recharge the battery pack as described below.

 

1

Connect the power cord to the

 

 

battery charger.

1

2

Connect the power plug to the

 

power outlet.

2

3

Fit the battery pack into the

 

 

battery charger.

3

Recharge lamp

 

 

CHARGE

1

2

Battery pack (PDV-BT10)

Charger (VWY 1060)

Note:

Fit sections 1 then 2 securely.

When recharging starts, the recharge lamp lights in red. If the recharge lamp blinks, the battery pack is not being recharged; wait a while before trying to recharge again.

The recharge lamp goes out when recharging completes. After confirming that the lamp is extinguished, remove the battery pack and power cord.

Recharging usually completes in about 2 hours 30 minutes, though this is variable depending on the operating conditions.

Notes on the battery pack

•The battery pack can be used for about 300 cycles of recharging and operations, though this is variable depending on the operating conditions.

•Charge the battery pack fully before using it for the first time.

The battery charger is compatible with supply voltages between 100 and 240 V AC and can be used universally. When you want to use it on an overseas travel, however, be sure to prepare a power plug

36 adapter matching the local power outlet.

CAUTION

Place the battery charger on a level, flat surface for recharging.

Do not short-circuit the terminals of the battery charger.

En

Notes for recharging

•When the battery pack is hot, it may take longer than usual time for recharging or may sometimes be unable to be recharged. Wait for the battery pack to cool down before retrying recharging.

•If the recharge lamp will not light, remove and fit the battery pack to the battery charger again.

•If the recharge lamp blinks, try recharging again under the allowable temperature range (between +5 and +35°C).

•To protect the battery pack, do not recharge a fully charged battery pack repeatedly. Repeated overcharging may deteriorate the battery performance.

•The battery pack becomes hot after recharging, but this is not malfunction.

•Be sure to remove the power plug from the power outlet after recharging. If the power plug is left connected, power of about 1 Watt will be consumed.

•When the battery pack is recharged in a hot environment, it may not recharge fully.

•The temperature during recharging affects the recharging efficiency. Recharging is most efficient between temperatures of 10 and 30°C. Place the battery charger in a place within this temperature range whenever possible.

Using the Battery

English

USING BEFORE

37

En

USING BEFORE

Using the Battery

Attaching the battery pack and player (PDV-LC10 only)

Attach the battery pack and player to the battery case as described below.

1

2

Battery pack operation

 

 

 

1

Attach the battery pack to the

 

1

battery case.

 

1 Fit the terminal side of the battery

 

 

 

 

pack into the battery case.

 

 

2 Push in until it clicks.

 

2

Attach the player to the

 

 

battery case.

2

1

2

3

1Align the guide hole on the rear of the player with the rear guide on the battery case.

2Push in the front part of the player until it clicks.

3Set the power switch of the player to ON.

Now the player can be operated.

When the battery pack is fully charged, the player can play DVDs for about 3 hours and 30 minutes continuously.

If the power is switched on while the battery pack is not fully charged, the player operation may sometimes become unstable. Be sure to charge the battery pack fully before use.

ON/OFFHOLD

38

En

Using the Battery

1

1

 

 

2

2

AC power operation

1Attach the player to the battery case.

1Align the guide hole on the rear of the player with the rear guide on the battery case.

2Push in the front part of the player until it clicks.

2Connect the DC output plug of the AC adapter to the DC IN connector on the rear of the battery case.

3Connect the power plug of the AC adapter to the power

3 outlet.

4 Set the power switch of the player to ON.

Now the player can be operated.

English

USING BEFORE

4

ON/OFFHOLD

Notes:

When both the battery pack and AC adapter are connected to the battery case, the battery pack will not be recharged. In this case, use the battery charger for recharging the battery pack (page 36).

CAUTION

Be sure to use the AC adapter provided with the player.

Before inserting or removing the DC output plug of the AC adapter, always be sure to set the power switch of the portable DVD player to OFF.

When both the battery pack and AC adapter are connected to the battery case, the AC adapter operation is given the priority. As their simultaneous connection may increase the equipment temperature, it is recommended to remove the battery.

39

En

USING BEFORE

Using the Battery

Removing the player and battery pack (PDV-LC10 only)

The player and battery pack can be removed from the battery case as described below.

1

ON/OFFHOLD

1 Set the power switch of the player to OFF.

If the AC adapter is connected, remove its power plug from the wall outlet then remove the DC output plug from the battery case.

2

While holding the player eject

2

buttons on the left and right of

 

the battery case, lift the front

 

part of the player to remove.

3

While holding the battery

 

release button on the battery

 

case, lift the battery pack to

 

remove.

3

40

En

Turning On the Power

 

IN

9V

DC

2

 

1

3

Main unit (front panel)

4

ON/OFFHOLD

Power indicator

Remote control unit

4

1Connect the included AC adapter and power cord.

2Connect the AC adapter connected in step 1 to the DC input jack on the main unit.

3Connect the power plug to a power outlet.

4Slide the power switch on the main unit to the left (holding it there for about 1 second).

The power indicator turns green. The player can now be used.

In the standby mode (when the power indicator is lit red), the power can also be turned on by pressing the power button on the remote control unit.

Note:

When using the battery pack (PDV-BT10), the power can only be turned on with the power switch on the main unit. (The power button on the remote control unit cannot be used.)

Hint:

The included AC adapter is compatible with voltages of 100 to 240 V, so you can use it on trips overseas.

Note that you need a converter plug (available in stores) suited for the region in which you are travelling.

English

OPERATION BASIC

4 ¢

41

En

Making Settings with the Setup Navigator

OPERATION BASIC

The “Setup Navigator” is a function for automatically making the player’s settings by answering questions about the disc language and the components connected to the player. The settings made with the Setup Navigator are as follows:

• Language • Connections with the TV (TV type) • Connections with the amplifier (digital jack, amplifier’s 96 kHz compatibility)

Starting the Setup Navigator

Main unit

2 1, 2 1

1In the stop mode, press the SETUP button, then select “Setup Navigator” under the “General” tab.

For operating instructions, refer to “Setup Screen Operations” on pages 57 to 61.

The Setup Navigator screen is displayed automatically.

When “Not Used” is selected, the Setup Navigator screen will no longer appear when the SETUP button is pressed.

Tabs

Audio1 2 Video Language General Other

 

Setup Navigator

Remote control unit

Setup Navigator Start

Not Used

i Setting up using the Setup Navigator

2

1 Move ENTER Select SETUP Exit

2

4 ¢

 

1 3 ¡

2

Use the cursor buttons (5/ )

 

Hint:

 

to select “Start”, then press

 

• The i mark indicates information. Brief

the ENTER button.

 

 

 

descriptions are provided after the

i

 

 

 

The Setup Navigator starts.

 

 

mark. Refer to these descriptions if you

 

 

have any questions about the settings.

Audio1 2 Video Language General Other

 

 

• Press the RETURN button to return to the

 

 

Setup Navigator

 

 

 

 

setup screen. When this is done, any

 

 

 

 

 

 

 

 

 

 

new settings made on the current setting

Language

 

 

 

 

 

screen are canceled.

 

OSD Language

Englishfrançais

 

 

 

 

 

 

 

Español

 

 

 

Note:

 

i Setup player’s OSD language

 

 

 

 

 

 

 

 

 

42

This function cannot be started during

Move

ENTER

Select

SETUP

Exit

 

playback.

 

 

 

 

 

 

En

Making Settings with the Setup Navigator

Setting the on-screen display language

Set the language displayed on the screen. When an option is selected, the language of the on-screen messages automatically changes to the language set on this screen.

Main unit

RETURN

Remote control unit

Use the cursor buttons (5/ ) to select the language to be

 

displayed on the screen, then

ENTER press the ENTER button.

 

Cursor

Audio1 2 Video Language General Other

 

buttons

 

Setup Navigator

 

 

 

 

 

 

 

 

Language

 

 

 

 

 

OSD Language

Englishfrançais

 

 

 

 

 

Español

 

 

 

i Setup player’s OSD language

 

 

 

Move

ENTER

Select

SETUP

Exit

English: The on-screen messages are in English.

 

 

 

 

 

Español: The on-screen messages are

 

 

 

 

 

in Spanish.

ENTER

 

 

 

 

• The language selected as the on-

Cursor

 

 

 

 

 

 

 

RETURN

screen display language will also be set

buttons

4

 

¢

 

 

 

 

 

1

3

¡

 

as the Subtitle and Audio language.

 

e

8

E 7

 

(Pages 63 and 64)

 

 

 

 

 

• The “Auto Language” setting is

 

 

 

 

 

automatically set to “On”. (Page 68)

English

OPERATION BASIC

43

En

OPERATION BASIC

Making Settings with the Setup Navigator

Setting the type of TV to be connected

Set the type of TV to be connected.

Main unit

 

Use the cursor buttons (5/ ) to

select the type of TV, then press

 

the ENTER button.

 

 

ENTER

 

 

 

 

 

 

Audio1 2 Video Language General Other

 

Cursor

Setup Navigator

 

 

 

buttons

TV Connection

 

 

 

 

Widescreen (16:9)

 

TV Type

 

 

 

Standard (4:3)

 

 

i Widescreen TV 16:9 aspect ratio

 

 

Move

ENTER

Select

SETUP

Exit

Remote control unit

ENTER

 

 

 

Cursor

 

 

 

buttons

4

 

¢

 

1

3

¡

 

e

8

E 7

Widescreen (16:9): Select this for a TV with a 16:9 horizontal:vertical aspect ratio.

Select “Widescreen (16:9)” when using the PDV-LC10’s liquid crystal monitor.

Standard (4:3): Select this for a TV with a 4:3 horizontal:vertical aspect ratio.

Hint:

Press the cursor button (2) to return to the previous setting screen.

44

En

Making Settings with the Setup Navigator

Setting the type of amplifier to be connected (digital jack)

Here set the type of digital signal the amplifier connected to the player’s digital output jack is compatible with.

Main unit

Use the cursor buttons (5/ ) to

 

select the digital signal with

 

which the amplifier is compatible,

ENTER

then press the ENTER button.

Cursor

Audio1 2 Video Language General Other

 

Setup Navigator

 

 

 

buttons

Dolby Digital

 

 

 

 

Dolby Digital/DTS

 

Amp Connection

 

Dolby Digital/MPEG

 

Digital Jacks

Dolby D/DTS/MPEG

 

 

 

PCM

 

 

 

 

 

Not Connected

 

 

i Compatible with Dolby Digital

 

 

 

Move

ENTER

Select

SETUP

Exit

English

Remote control unit

ENTER

 

 

 

Cursor

 

 

 

buttons

4

 

¢

 

1

3

¡

 

e

8

E 7

Dolby Digital: Select this when the amplifier or decoder connected to the player is compatible with Dolby Digital signals.

Dolby Digital/DTS: Select this when the amplifier or decoder connected to the player is compatible with Dolby Digital and DTS signals.

Dolby Digital/MPEG: Select this when the amplifier or decoder connected to the player is compatible with Dolby Digital and MPEG signals.

Dolby D/DTS/MPEG: Select this when the amplifier or decoder connected to the player is compatible with Dolby Digital, DTS and MPEG signals.

PCM: Select this when the amplifier connected to the player is a stereo amplifier or a Dolby Pro-Logic compatible amplifier.

Not connected: Select this when no amplifier is connected or when you do not know the type of the connected amplifier. When this is selected, there is no need to make the “Amplifier’s 96 kHz Compatibility” setting, so proceed to “Quitting the Setup Navigator” (page 47).

OPERATION BASIC

45

En

Making Settings with the Setup Navigator

Setting the type of amplifier to be connected (amplifier’s 96 kHz

compatibility)

OPERATION BASIC

Here set whether or not the amplifier connected to the player is 96 kHz compatible. When an option is selected, 96 kHz or 48 kHz (96 kHz=48 kHz) linear PCM audio is set automatically.

Main unit

 

Use the cursor buttons (5/ ) to

select the amplifier’s 96 kHz compatibility, then press the

ENTER ENTER button.

Cursor

Audio1 2 Video Language General Other

 

Setup Navigator

 

 

 

buttons

 

 

 

 

Amp Connection

No

 

 

 

96 kHz PCM Audio

Yes

 

 

 

 

 

Don't Know

 

 

i Digital jack not compatible with 96 kHz

 

Move

ENTER

Select

SETUP

Exit

Remote control unit

ENTER

 

 

 

Cursor

 

 

 

buttons

4

 

¢

 

1

3

¡

 

e

8

E 7

46

No: Select this when the amplifier connected to the player is not 96 kHz compatible. When this is selected, the 96 kHz signals are down-sampled to 48 kHz before being output from the digital output jack.

Yes: Select this when the amplifier or D/A converter connected to the player is 96 kHz compatible. When this is selected, 96 kHz linear PCM signals are output from the digital output jack. Note however that it is not possible to output 96 kHz digital audio signals from some discs recorded in 96 kHz.

Don’t know: Select this if you do not know whether the amplifier connected to the player is 96 kHz compatible or not. When this is selected, the 96 kHz signals are down-sampled to 48 kHz before being output from the digital output jack.

En

Making Settings with the Setup Navigator

Quitting the Setup Navigator

Here select whether or not to set, cancel, or redo the settings that have been automatically set by the player.

Main unit

 

Use the cursor buttons (5/ ) to

select how to quit the Setup

 

Navigator, then press the ENTER

ENTER

button.

 

 

 

Cursor

Audio1 2 Video Language General Other

 

buttons

Setup Navigator

 

 

SETUP

 

Valid

 

 

 

Exit Setup Navigator Invalid

 

 

 

 

Redo

 

 

 

i Confirm setup adjustments

 

 

 

Move

ENTER Select

SETUP

Exit

Remote control unit

 

Valid: Select this to set the settings

 

 

 

 

 

 

 

 

made with the Setup Navigator.

 

 

 

 

Invalid: Select this if you do not want

ENTER

 

 

 

to change the settings.

 

 

 

Redo: Select this to start the settings

Cursor

 

 

 

SETUP

 

 

 

over from the beginning.

buttons

4

 

¢

When “Valid” or “Invalid” is selected

 

 

 

 

 

 

 

1

3

¡

and the ENTER button is pressed, the

 

 

 

 

 

e

8

E 7

Setup Navigator quits and the screen

 

 

shown below appears automatically.

English

OPERATION BASIC

Hint:

Only the basic settings are set with the Setup Navigator. To make more detailed settings, settings must be made using the setup screen. Refer to pages 57 to 74.

To restore the settings made with the Setup Navigator to the factory defaults, slide the power button while pressing in the RETURN button. (Page 118)

Audio1 2 Video Language General Other

 

Setup Menu Mode

Basic

 

 

Setup Navigator

 

 

 

Parental Lock

Level8

 

 

i Setup connected TV/amp and

 

disc language simultaneously

 

Move

ENTER

Select

SETUP

Exit

Press the SETUP button to close the Setup Navigator screen.

47

En

Playback Functions

Loading discs

1

2

1Hold the display and operating section securely and lift the display (PDV-LC10 only).

2Slide the main unit’s OPEN switch to the #side and open

the lid.

The following message appears on the display window:

OPEN#

OPERATION BASIC

48

3

Set the disc in place and press

 

down on the disc with your

 

fingers near the center hole.

3

A click is heard.

 

Notes:

 

• Set the disc securely. Failure to set it

 

securely could result in damage.

 

• Do not use cracked or warped discs.

 

Doing so could result in damage.

 

• Set single-sided DVDs or CDs with the

 

label (printed) side facing upwards. For

 

double-sided DVDs, check the side

 

carefully, then load the disc securely (until

 

a click is heard).

4

• With CDs or one-sided DVDs, you do not

have to worry about touching the label

(printed) side of the disc with your fingers. Two-sided DVDs, however, have signals recorded on both sides, so be careful not to scratch them when removing them from the player.

4 Press PUSH CLOSE to close the lid.

En

Playback Functions

Playing discs

1 Load the disc and close the

1

Main unit

Next button

2

cover.

One of the following messages appears on the display window:

For DVDs:

For video CDs:

For CDs:

For some discs, playback starts automatically when the lid is closed.

When discs for which program memories (page 102) are set, playback starts automatically in the programmed order.

2 Press the play/pause button.

 

• Playback starts.

Remote control unit

• For some discs, a menu screen

appears. For video CDs, playing the

 

disc according to the instructions on

 

the disc’s menu screens is called PBC

 

(playback control) playback.

English

OPERATION BASIC

2

Number buttons

SHIFT

4 ¢

1 3 ¡

e 8 E 7

NEXT Hint:

For video CDs, it is also possible to play a disc without displaying the menu screen. For example, to play from track 1, press the next button once while in the stop mode, or press the “1” number button while in the stop mode.

For DVDs, when the next button is pressed while in the stop mode, playback starts from the beginning of the title.

49

En

Playback Functions

If a menu screen appears

For DVDs with menu screens or video CDs with playback control (PBC), a menu screen appears.

Main unit

Previous and next

buttons

ENTER

Cursor buttons

DVD

Use the cursor buttons

(5/ /2/3) to select the item, then press the ENTER button.

To use the number buttons on the remote control unit to select the item, press the number buttons while pressing the SHIFT button.

MENU

TOP

 

MENU

RETURN

 

BASIC

Remote control unit

 

 

 

OPERATION

 

 

 

TOP MENU

 

 

MENU

 

 

 

 

ENTER

 

 

 

 

Cursor buttons

4

 

RETURN

 

Previous

 

¢

 

 

 

Next buton

 

button

1

3

¡

 

Number e

8

E 7

 

buttons

 

 

 

SHIFT

50

Example: For DVDs with menu screens

TITLE MENU

1POP

2JAZZ

3COUNTRY

4R&B

5CLASSICAL

Video CD

Select by pressing the number buttons while pressing the SHIFT button.

Example: For video CDs with playback control (PBC)

1POP

2JAZZ

3COUNTRY

4R&B

5CLASSICAL

If the video CD’s menu screen includes more than one page, use the previous and next buttons to switch between the pages.

En

Playback Functions

 

To display the menu screen

 

The way in which the menu screen is

 

displayed differs from disc to disc. Press

 

the MENU, TOP MENU or RETURN button

 

during playback of DVDs, the RETURN

 

button during PBC playback of video CDs.

 

For details, refer to the documentation

 

included with the disc.

MENU

TOP

MENU

 

RETURN

 

English

OPERATION BASIC

51

En

OPERATION BASIC

Playback Functions

Stopping the disc

Main unit

Previous button

STOP

Remote control unit

Previous

4

 

¢

 

button

1

3

¡

 

 

 

 

e

8

E 7

STOP

Press the STOP button.

The following message appears on the display window:

RESUME

Resume function (DVDs and video CDs)

When the STOP button is pressed, “” lights.

When the play button is pressed, playback starts from the position at which it was stopped. When the disc is removed or the STOP button is pressed again, the resume function is canceled and “” turns off.

Hint:

For some discs, playback may not start from the position at which it was stopped.

If the STOP button then the previous button is pressed while the resume function is on, playback starts from the beginning of the title.

Pausing the disc

Main unit

Remote control unit

Play/pause button

Press the play/pause button.

The following message appears on the display window:

Press the button again to resume playback.

1 3 ¡

PAUSE

e 8 E 7

52

En

Playback Functions

Scanning forward and backward

Main unit

1

2

Remote control unit

4 ¢

Scan buttons

1 3 ¡

PLAY

e 8 E 7

Operation from the main unit

1During playback, press and hold in the previous or next

button.

4: Reverse direction ¢: Forward direction “Scan” flashes.

2 Release the button while scan is flashing.

Playback resumes from that point.

Hold scan

Scanning is held when the previous or next button is pressed in until “Scan” stops flashing, remaining lit. Press the play/pause button once the desired position is reached.

Operation from the remote control unit

1 Press and hold in one of the scan buttons during playback.

1: Reverse direction ¡: Forward direction “Scan” flashes.

2Release the button while scan is flashing.

Hold scan

Scanning is held when the scan button is pressed in until “Scan” stops flashing, and remains lit. Press the PLAY button once the desired position is reached.

English

OPERATION BASIC

53

En

Playback Functions

Returning to the previous chapter or track - DVDs, video CDs and CDs

Main unit

Previous

 

button

Press the previous button during playback.

When pressed once, playback returns to the beginning of the currently playing chapter or track.

When pressed again, playback returns to the beginning of the previous chapter or track.

Remote control unit

OPERATION BASIC

Previous

4

¢

button

1

3 ¡

 

Moving ahead to the next chapter or track - DVDs, video CDs and CDs

Main unit

Press the next button during

playback.

Next button

When pressed once, playback moves forward to the next chapter or track.

Remote control unit

Next button

54

4

¢

 

 

En

 

Playback Functions

Removing discs

 

Main unit

1 Press the STOP button.

 

The following message appears on the

 

display window:

1

Remote control unit

English

1 3 ¡

e 8 E 7

1

2

3

4

2 Slide the OPEN switch to the

#side and open the lid.

BASIC

 

The following message appears on the

 

display window:

OPERATION

 

3 Remove the disc.

Note:

With CDs or one-sided DVDs, you do not have to worry about touching the label (printed) side of the disc with your fingers. Two-sided DVDs, however, have signals recorded on both sides, so be careful not to scratch them when removing them from the player.

4 Press PUSH CLOSE to close

 

the lid.

55

En

Turning Off the Power

Main unit

1

ON/OFFHOLD

Power indicator

Remote control unit

1

BASIC

4

¢

 

OPERATION

 

9V

 

 

IN

 

 

DC

3

4

2

56

1When the power is on, slide the power switch to the left side and hold it there for at least 1 second.

The power indicator switches from green to red and the standby mode is set.

The power can also be turned off by pressing the power button on the remote control unit.

2Unplug the power cord from the power outlet.

3Disconnect the AC adapter from the player’s DC input jack.

4Disconnect the power cord from the included AC adapter.

Note:

When using the battery pack (PDV-BT10), the power indicator turns off when the power is turned off. This is to prevent wear of the battery.

En

Setup Screen Operations

With this player, various functions recorded on DVDs can be set in addition to the settings made with the Setup Navigator. To make these settings you must first display the setup screen.

Starting up the setup screen

By changing the setting items on the various menus on the setup screen you can create a more convenient playback environment. The setup screen has two modes.

Main unit

Press the SETUP button.

 

The setup screen appears.

 

 

Audio1 2 Video Language General Other

 

Dolby Digital Out – Dolby Digital

 

DTS Out – Off

 

 

96kHz PCM Out – 96kHz 348kHz

 

MPEG Out – MPEG 3PCM

SETUP

i Setup audio

 

 

Digital output format/tone adjust

 

Move

SETUP Exit

English

• The setup screen is displayed whenever the SETUP button is pressed, regardless Remote control unit of the player’s play mode (play or stop) or

the type of disc (DVD, video CD or CD).

• Press the SETUP button again to close the setup screen.

SETUP

Hint:

4 ¢

1 3 ¡

e 8 E 7

When the Setup Navigator is started up, the on-screen information is displayed regardless of whether the “Basic” or “Expert” setup screen mode is selected.

If the Setup Navigator has appeared automatically, select “Not Used” then press the ENTER button, or press the return button. The setup screen appears.

OPERATIONS ADVANCED

57

En

OPERATIONS ADVANCED

Setup Screen Operations

Names of parts on the setup screen

The setup screen consists of six tabs (Audio 1, Audio 2, Video, Language, General and Other), the on-screen information and the operating guide.

1

Audio1 2 Video Language General Other

 

 

 

Dolby Digital Out

Dolby Digital

 

 

 

2

 

 

DTS Out

Off

 

 

3

 

 

 

 

 

 

 

96kHz PCM Out

96kHz 348kHz

 

 

 

 

 

 

MPEG Out

MPEG 3PCM

 

 

 

4i Setup audio

Digital output format/tone adjust

 

Move

SETUP

Exit

 

 

 

 

 

 

5

 

 

 

1 Tabs

The first step to making the settings is to select one of the six tabs (Audio 1, Audio 2, Video, Language, General or Other). Select the desired setting item from the tabs to display the various settings.

2 Setting items

The setting items for the selected tag are displayed here.

3 Current settings/choices

The current settings of the different modes or the choices for the setting items are displayed here.

5 Operating guide

A list of the buttons that can be used is displayed here to help you when operating the buttons. If there is more than one button that can be used for the same operation, only one of the buttons is displayed.

Hint:

When the cursor is set to a tag, a list of the current settings is displayed. After checking that screen, select the mode for which you want to make changes from among the tags. (Page 60)

Note:

4 On-screen information

When the cursor is set to “Other” or when

the “Expert” setup screen is selected, the

Information on the item specified with

on-screen information is not displayed,

the cursor is displayed here. The “ i

regardless of the setting item.

mark indicates information.

 

58

En

Setup Screen Operations

Items that can be set and items that cannot be set depending on the type

of disc

The setup screen includes items that can be set and items that cannot be set depending on the type of disc (DVD, video CD or CD). On this player, these items can be distinguished by color-coded indicators to the left of the currently selected setting item. For details, see the table below.

Color of

Types of discs for which the

indicator

setting is possible

 

 

Blue

DVDs only

 

 

Yellow

DVDs and video CDs

 

 

Green

All types of discs

 

 

English

Indicator

Audio1 2 Video Language General Other

OSD Language – English

Audio Language – English

Subtitle Language

English

Auto Language – Spanish

 

 

Other

i Setup disc's subtitle language

Move

 

 

ENTER

Select

SETUP

Exit

Hint:

When a video CD or CD is loaded (in the play or stop mode) and an item on the setup screen that can only be set for DVDs is selected, a blue DVD mark appears momentarily at the upper right of the display, indicating that the setting item cannot be set for the currently loaded disc.

DVD mark

Audio1 2 Video Language General Other

OSD Language – English

 

 

Audio Language – English

 

 

Subtitle Language

English

 

 

Auto Language – Spanish

 

 

 

 

Other

 

 

i Setup disc's subtitle language

 

 

Move

ENTER

Select

SETUP

Exit

OPERATIONS ADVANCED

59

En

Setup Screen Operations

Making settings using the setup screen

Various settings can be made using the setup screen. The procedure described below applies to all the settings on the setup screen, so read this section carefully.

Main unit

1 Use the cursor buttons (2/3)

to select the tag for the item

 

 

you want to set.

 

Audio1 2 Video Language General Other

 

 

OSD Language – English

 

 

1, 2, 3

Audio Language – English

 

 

Subtitle Language – English

 

 

 

Auto Language – On

 

 

 

i Setup subtitle and audio language

 

 

Move

SETUP

Exit

2 Use the cursor buttons (5/ )

Remote control unit

to select the setting item you

OPERATIONS ADVANCED

60

 

 

 

 

want to set.

 

 

 

 

 

 

Audio1 2 Video Language General Other

 

 

 

 

 

OSD Language – English

 

 

 

 

 

Audio Language – English

 

1, 2, 3

 

 

 

Subtitle Language

English

 

 

 

 

Auto Language – Spanish

 

 

 

 

 

 

4

 

¢

 

 

Other

 

1

3

¡

 

i Setup disc's subtitle language

 

 

 

 

 

 

e

8

E

7

Move

SETUP

Exit

 

 

 

 

3 Press the cursor button (3).

Audio1 2 Video Language General Other

 

 

 

@

 

 

OSD Language – English

 

 

Audio Language – English

 

 

Subtitle Language

English

 

 

Auto Language – Spanish

 

 

 

 

Other

 

 

i Setup disc's subtitle language

 

 

Move

ENTER

Select

SETUP

Exit

En

 

Setup Screen Operations

4

Use the cursor buttons (5/ )

 

to select the desired setting

Main unit

mode

 

 

 

5

Press the ENTER button.

 

The setting is stored in the memory.

5

 

 

 

Audio1 2 Video Language General Other

4, 5

OSD Language – English

Audio Language – English

 

Subtitle Language

English

6

Auto Language – Spanish

 

Other

 

i Setup disc's subtitle language

 

Move

SETUP Exit

If there is no need to make changes, press the cursor button (2) to return.

English

 

 

 

6 Press the SETUP button to

Remote control unit

 

close the setup screen.

 

 

 

 

 

 

Note:

 

5

 

 

Items that cannot be changed on the setup

 

6

screen during playback are displayed in

4, 5

 

gray.

 

 

 

 

 

4

 

¢

 

 

1

3

¡

 

Audio1 2 Video Language General Other

e

8

E 7

 

OSD Language English

 

Audio Language – English

 

 

 

Gray

 

 

 

Subtitle Language English

 

 

 

 

Auto Language – On

OPERATIONS ADVANCED

61

En

Setup Screen Operations

Setting the expert mode

In addition to the “Basic” mode, the setup screen also has an “Expert” mode in which more detailed settings can be made.

1

Press the SETUP button.

Main unit

 

The setup screen appears.

 

 

 

OPERATIONS ADVANCED

62

 

 

 

 

Audio1 2 Video Language General Other

 

 

 

 

3

 

Dolby Digital Out – Dolby Digital

 

 

 

 

 

DTS Out – Off

 

 

 

 

 

 

96kHz PCM Out – 96kHz

348kHz

 

 

 

 

 

 

 

 

 

 

 

 

MPEG Out – MPEG 3PCM

 

 

 

 

2

i

Setup audio

 

 

 

 

 

 

 

 

 

Digital output format/tone adjust

 

 

 

 

1

 

Move

 

 

SETUP

Exit

 

 

 

 

 

 

 

 

 

 

 

 

2

From the setup screen’s

 

 

 

 

 

“General” tab, use the cursor

 

 

 

 

buttons (3/5/ ) to select

 

Remote control unit

 

 

“Expert” at “Setup Menu Mode”.

 

 

 

 

Audio1 2 Video Language General Other

 

 

 

 

 

 

Setup Menu Mode

Expert

 

 

3

 

 

 

 

Setup Navigator

Basic

 

 

 

 

1

 

Parental Lock – Level8

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

¢

 

i

Detailed setup mode

 

 

 

 

 

 

 

 

1

3

¡

 

 

Move

ENTER Select

SETUP

Exit

 

 

 

 

 

e

8

E

7

 

 

 

 

 

 

3 Press the ENTER button.

The setup screen switches to the “Expert” mode and no on-screen information is displayed.

Audio1 2 Video Language General Other

 

Setup Menu Mode

Expert

 

Setup Navigator – Basic

 

Parental Lock – Level8

 

Screen Saver – On

 

Background Color – Blue

 

Move

SETUP

Exit

En

Various Language and Subtitle Settings

In this section we use the setup screen to make the language and subtitle settings. Press the SETUP button to display the setup screen, then operate as described under “Making settings using the setup screen” on pages 60 and 61.

Setting the on-screen display language

Select the language to be used for the display when making the setup, etc.

There is no need to make this setting if the “OSD Language” has already been set with the Setup Navigator.

Audio1 2 Video Language General Other

 

 

 

OSD Language

English

 

 

Audio Language – Español

 

 

Subtitle Language – English

 

 

 

Auto Language – On

 

i

Setup player's OSD language

 

 

 

Move

SETUP

Exit

Settings:

English*

* Factory setting

 

 

Español

English: The on-screen messages are in English.

Español: The on-screen messages are in Spanish.

This setting can be changed during playback.

English

Setting the subtitle language

Select the language to be used for the subtitles.

Audio1 2 Video Language General Other

 

OSD Language – English

 

Audio Language – English

 

Subtitle Language

English

 

Auto Language – Spanish

 

 

Other

 

i Setup disc's subtitle language

 

Move

SETUP

Exit

English: The subtitles are displayed in English.

Spanish: The subtitles are displayed in Spanish.

Other: When this is selected, the language input screen appears and one of 136 subtitle languages can be selected using the language codes (page 123).

For details, see “When ‘Other’ is selected for the Subtitle, Audio or DVD language” on pages 66 and 67.

Settings: English*

 

This setting cannot be changed during

Spanish

 

* Factory setting

playback.

Other

 

OPERATIONS ADVANCED

63

En

Various Language and Subtitle Settings

Setting the audio language

Select the audio language.

Audio1 2 Video Language General Other

 

 

OSD Language – English

 

 

Audio Language

English

 

 

Subtitle Language – Spanish

 

 

Auto Language – Other

 

i

Setup audio language

 

 

 

Move

SETUP

Exit

Settings: English*

Spanish

Other * Factory setting

English: The audio language is set to English.

Spanish: The audio language is set to Spanish.

Other: When this is selected, the language input screen appears and one of 136 audio languages can be selected using the language codes (page 123). For details, see “When ‘Other’ is selected for the Subtitle, Audio or DVD language” on pages 66 and 67.

This setting cannot be changed during playback.

Setting the DVD menu language

Select the language in which menus are displayed. Switch the setup screen to the expert mode before making this setting. (Page 62)

 

 

 

 

 

w/ Subtitle Language: The menu language is the

ADVANCED

Audio1 2 Video Language General Other

 

same as the language set as the subtitle language.

 

English: The menu language is set to English.

 

OSD Language – English

 

 

Audio Language – English

 

Spanish: The menu language is set to Spanish.

Subtitle Language – English

 

Other: When this is selected, the language input

 

Auto Language – w/ Subtitle Language

 

DVD Language

English

 

screen appears and one of 136 audio languages can

 

Subtitle Display – Spanish

 

be selected using the language codes (page 123).

OPERATIONS

 

 

 

Subtitle Off – Other

 

 

 

For details, see “When ‘Other’ is selected for the

 

Move

SETUP

Exit

 

 

 

 

Subtitle, Audio or DVD language” on pages 66 and

Settings:

w/ Subtitle Language*

67.

 

 

English

 

 

This setting cannot be changed during

 

Spanish

 

 

 

 

 

playback.

 

 

* Factory setting

 

 

Other

 

 

 

Note:

If a language not stored on the disc is set, the menu is displayed in the default disc’s language.

64

En

Various Language and Subtitle Settings

Setting the subtitle display

Select whether or not to turn the display of subtitles on or off or to display “Assist Subtitle”. Switch the setup screen to the expert mode before making this

setting. (Page 62)

 

 

Audio1 2 Video Language General Other

 

OSD Language – English

 

Audio Language – English

 

Subtitle Language – English

 

Auto Language – On

 

DVD Language – On

 

Subtitle Display

Off

 

Subtitle Off – Assist Subtitle

 

Move

SETUP

Exit

Settings: On*

Off

Assist Subtitle

* Factory setting

On: The subtitles are displayed.

Off: The subtitles are not displayed. (Subtitles are automatically displayed for some DVDs.) (Page 68)

Assist Subtitle: “Assist Subtitles” are descriptions of the scene, etc., for the hearing impaired. When this item is selected, the assist subtitles are displayed. Assist Subtitles are only displayed when they are recorded on the disc.

This setting cannot be changed during playback.

English

OPERATIONS ADVANCED

65

En

OPERATIONS ADVANCED

Various Language and Subtitle Settings

When ‘Other’ is selected for the subtitle, audio or DVD language

Remote control unit

1, 4

1, 2, 3

4 ¢

1 3 ¡

e 8 E 7

SHIFT

Main unit

1, 4

1, 2, 3

1Use the cursor buttons (5/ ) to select “Other”, then press

the ENTER button.

The language selection screen appears.

Audio1 2 Video Language General Other

 

Audio Language

 

 

 

 

List of Languages

Code (0~2)

 

ja: Japanese

1

0

0

1

i Setup audio language

 

 

 

 

Move

 

 

 

Return

+/–

ENTER Select

 

SETUP

Exit

The numbers in parentheses next to “Code” indicate the range of numbers that can be set.

2Use the cursor buttons (2/3) to select “List of Languages”

or “Code”.

There are three ways to choose:

By selecting “List of Languages” then choosing with the cursor buttons (5/ )

By selecting the 4-digit code one digit at a time using the cursor buttons (5/ )

By selecting the 4-digit code from the “Language code table” (page 123) using the number buttons on the remote control unit.

3 Select the language.

In this example we select “French” (input code 0618).

Selecting from the “List of

Languages”

Select “List of Languages”, then press the cursor button (5) twice.

List of Languages

fr: French

66

En

Various Language and Subtitle Settings

Selecting by inputting the code using the cursor buttons

1.Press the cursor button (3) to select the first digit in the code.

Code

1 0 0 1

2.Press the cursor button ( ) cursor button and set to “0”.

Code

Selecting by inputting the code from the “Language Code List”

Press number buttons “0”, “6”, “1” and “8” on the remote control unit while pressing the SHIFT button.

4Press the ENTER button to set the new language.

Hint:

 

0

0 0 1

Press the RETURN button to return to the

3. Press the cursor button (3) to select

previous screen.

 

the second digit in the code.

 

 

Code

 

0 0 0 1

4.Press the cursor button (5) and set to “6”.

Code

0 6 0 1

5.Press the cursor button (3) to select the third digit in the code.

Code

0 6 0 1

6.Press the cursor button (5) and set to “1”.

Code

0 6 1 1

7.Press the cursor button (3) to select the fourth digit in the code.

Code

English

OPERATIONS ADVANCED

0 6 1 1

8.Press the cursor button (5) and set

to “8”.

Code

0

6

1

8

67

En

Various Language and Subtitle Settings

Setting the audio language and subtitle preferences

Here select whether to have the audio language and subtitles selected automatically as needed, or to use the audio and subtitle languages set with the setup settings.

Audio1 2 Video Language General Other

 

OSD Language – English

 

Audio Language – English

 

Subtitle Language – English

 

Auto Language

On

 

 

Off

 

Move

SETUP

Exit

Settings: On*

Off

* Factory setting

On: When the “Audio Language” and “Subtitle Language” settings are set to the same language, foreign movies are shown with the original audio soundtrack and subtitles in the language selected in the “Subtitle Language” menu option and domestic films are shown with the original audio soundtrack and no subtitles.

Off: The auto setting for the audio is canceled during playback, and the sound and subtitles are in the languages set for “Audio Language” and “Subtitle Language”.

This setting cannot be changed during playback.

OPERATIONS ADVANCED

Language setting when subtitles appear automatically

Here select the language for the subtitles displayed automatically when the subtitles are set not to be displayed (off). With some DVDs, subtitles are displayed automatically even if the subtitle display is turned off on the player. This setting selects the subtitle language at this time. Switch the setup screen to the expert mode before making this setting. (Page 62)

Audio1 2 Video Language General Other

OSD Language – English

Audio Language – English

Subtitle Language – English

Auto Language – On

DVD Language – w/Subtitle Language

Subtitle Display – With Audio

Subtitle Off Selected Subtitle

Move

SETUP

Exit

With Audio: The subtitles are displayed in the same language as the audio language being played.

Selected Subtitle: The selected subtitle language is selected.

This setting cannot be changed during playback.

Settings: With Audio

Selected Subtitle*

68

En

*Factory setting

Various Video Settings

In this section we use the setup screen to make the video settings. Press the SETUP button to display the setup screen, then operate as described under “Making settings using the setup screen” on pages 60 and 61.

English

Setting the TV screen size

Select whether or not the connected TV has a standard screen (4:3) or a wide screen (16:9). There is no need to make this setting if the “TV Type” setting has already been made with the Setup Navigator.

Audio1 2 Video Language General Other

 

TV Screen

4:3 (Letter Box)

Picture Quality – 4:3 (Pan&Scan)

 

16:9 (Wide)

 

i Setup picture according to TV

 

Move

SETUP

Exit

Settings: 4:3 (Letter Box)

4:3 (Pan & Scan) 16:9 (Wide)*

*Factory setting

4:3 (Letter Box): Select this when connecting a regular 4:3 TV.

4:3 (Pan & Scan): Select this when connecting a regular 4:3 TV.

16:9 (Wide): Select this when using the PDV-LC10’s liquid crystal display or when connecting a 16:9 wide screen TV.

For instructions on TV screen settings, refer to “Switching the aspect ratio” below.

Switching the aspect ratio

Viewing with a wide screen TV (16:9)

DVD screen size

Setting and appearance

DVDs recorded in

 

16:9 size

 

With some DVDs

 

there may be black

 

bands at the top

 

and bottom of the

“16:9 (Wide)” setting

picture.

 

DVDs recorded in

 

4:3 size

 

When DVDs

 

recorded in 4:3 size

 

are played on a

 

wide screen TV,

 

black bands appear

“16:9 (Wide)” setting

on the sides of the

picture.

 

This setting cannot be changed during playback.

DVD screen size

Setting and appearance

DVDs recorded in

 

4:3 size

 

When DVDs

 

recorded in 4:3

 

size are played on

 

a wide screen TV,

 

the picture will

 

appear stretched

 

horizontally across

“16:9 (Wide)” setting

the screen. In this

(picture stretched

case, switch the

horizontally)

TV to the standard

 

screen. For

 

details, refer to the

 

TV’s operating

 

instructions.

 

Continued on next page

OPERATIONS ADVANCED

69

En

OPERATIONS ADVANCED

Various Video Settings

Viewing on a standard (4:3) TV

DVD screen size

Setting and appearance

DVDs recorded in

 

16:9 size

 

When DVDs

 

recorded in wide

 

size are played on

 

a standard TV,

 

black bands

“4:3 (Letter Box)”

appear at the top

setting

and bottom of the

 

picture.

 

DVDs recorded in

 

16:9 size

 

When DVDs

 

recorded in wide

 

size are played on

 

a standard TV, the

 

left and right sides

“4:3 (Pan & Scan)”

of the picture are

cut off.

setting

 

Note:

For some discs it is not possible to switch the aspect ratio. For details, refer to the disc’s jacket.

DVD screen size

Setting and appearance

DVDs recorded in

 

4:3 size

 

When DVDs

 

recorded in 4:3 size

 

are played on a

 

standard TV, the

 

picture will appear

All settings

normal regardless

 

of the setting.

 

DVDs recorded in

 

16:9 size

 

When DVDs

 

recorded in wide

 

size are played on a

 

standard TV and the

 

player is set to

“16:9 (Wide)” setting

“16:9 (Wide)”, the

(picture stretched

picture will appear

vertically)

stretched vertically

 

on the screen. In

 

this case, select

 

“4:3 (Letter Box)”

 

or “4:3 (Pan &

 

Scan)”.

 

The horizontal-to-vertical screen size ratio of standard TVs is 4:3, while that of wide screen and high definition TVs is 16:9. This horizontal-to-vertical ratio is called the aspect ratio. On discs with which the aspect ratio cannot be changed, switch the screen size as necessary using the monitor button on the PDV-LC10 and the corresponding button on the TV.

70

En

Various Video Settings

Moving the position of the on-screen display

Set the position of the on-screen display according to the TV type. Switch the setup screen to the “Expert” mode before making this setting. (Page 62)

Audio1 2 Video Language General Other

 

 

TV Screen – 16:9 (Wide)

 

 

Picture Quality – Standard

 

 

Still Picture – Auto

 

On Screnn Display – On

 

 

OSD Position

Wide

 

 

Angle Indicator – Normal

 

 

Move

SETUP

Exit

Settings:

Wide

 

 

 

Normal*

 

 

Wide: Set this to prevent the onscreen display messages from being partially off the picture when zoom is selected with a wide screen TV.

Normal: Select this position when “Normal” or “Full” is selected with a wide screen TV.

*Factory setting

English

Setting the picture quality

Set the desired picture quality.

Audio1 2 Video Language General Other

 

 

TV Screen – 16:9 (Wide)

 

 

Picture Quality

Cinema

 

 

 

Animation

 

 

 

Standard

 

i

Adjust picture quality

 

 

Move

SETUP

Exit

Settings: Cinema

Animation

Standard*

*Factory setting

Cinema: In this mode the black portions of the picture are expressed clearly.

Animation: In this mode the colors are expressed vividly.

Standard: This is the standard picture mode.

This setting can be changed during playback.

OPERATIONS ADVANCED

71

En

Various Digital Signal Settings

Use the setup screen to make the “Audio” settings. Press the SETUP button to display the setup screen, then operate as described under

“Making settings using the setup screen” on pages 60 and 61.

Dolby Digital signal settings

Dolby Digital is a “three-dimensional” audio technology used in movie theaters. It allows recording of up to 5.1 channels of independent audio signals. There is no need to make this setting if the “Digital Jack” setting has already been made with the Setup Navigator.

Audio1 2 Video Language General Other

 

Dolby Digital Out

Dolby Digital

 

DTS Out

– Dolby Digital 3PCM

96kHz PCM Out

– 96kHz 348kHz

 

MPEG Out – MPEG 3PCM

 

i Switch Dolby Digital audio mode

 

Move

SETUP

Exit

Settings: Dolby Digital*

Dolby Digital 3PCM

*Factory setting

Dolby Digital: A Dolby Digital compatible amplifier or decoder is required to select this mode.

Dolby Digital 3PCM: The Dolby Digital signals are converted into linear PCM before being output. In this mode a Dolby Pro-Logic amplifier or an amplifier equipped with a digital input can be used.

This setting can be changed during playback.

OPERATIONS ADVANCED

DTS signal settings

DTS is another “three-dimensional” audio technology used in movie theaters. It also allows recording of up to 5.1 channels of independent audio signals. DTS offers somewhat different sound from Dolby Digital. There is no need to make this setting if the “Digital Jack” setting has already been made with the Setup Navigator.

 

 

 

Off: DTS signals are not output.

Audio1 2 Video Language General Other

DTS: A DTS compatible amplifier or

Dolby Digital Out – Dolby Digital

decoder is required to select this

 

DTS Out

Off

 

mode.

 

96kHz PCM Out – DTS

 

MPEG Out – MPEG 3PCM

 

 

 

 

This setting can be changed during

i Switch DTS audio output mode

playback.

 

Move

SETUP

Exit

Settings:

Off*

 

Note:

 

The DTS-CD digital output cannot be turned

 

DTS

 

 

 

on and off.

72

 

 

 

*Factory setting

 

 

En

SETUP Exit
*Factory setting

Various Digital Signal Settings

96 kHz PCM signal setting

96 kHz PCM is a high quality audio format with a far higher sampling frequency than the 44.1 kHz format used for CDs. This format is used mainly for music DVDs. There is no need to make this setting if the “Digital Jack” setting has already been made with the Setup Navigator.

Audio1 2 Video Language General Other

 

Dolby Digital Out – Dolby Digital

 

DTS Out – Off

 

96kHz PCM Out

96kHz 348kHz

 

MPEG Out – 96kHz

 

i Switch 96kHz audio output mode

 

Move

SETUP

Exit

96 kHz 348 kHz: The 96 kHz signals are down-sampled to 48 kHz before being output. In this mode a Dolby Pro-Logic amplifier or an amplifier equipped with a digital input can be used.

96 kHz: A 96 kHz compatible amplifier or D/A converter is required to select this mode.

Settings: 96 kHz 348 kHz*

96 kHz This setting can be changed during playback.

*Factory setting

English

MPEG signal setting

MPEG is one audio format used with DVDs. There is no need to make this setting if the “Digital Jack” setting has already been made with the Setup Navigator.

Audio1 2 Video Language General Other

Dolby Digital Out – Dolby Digital

DTS Out – Off

96kHz PCM Out – 96kHz 348kHz

MPEG Out MPEG

MPEG 3PCM

i Switch MPEG audio output mode Move

Settings: MPEG

MPEG 3PCM*

MPEG: An MPEG compatible amplifier or D/A converter is required to select this mode.

MPEG 3PCM: The MPEG signals are converted into linear PCM audio signals (48 kHz) before being output. In this mode a Dolby Pro-Logic amplifier or an amplifier equipped with a digital input can be used.

This setting can be changed during playback.

OPERATIONS ADVANCED

73

En

OPERATIONS ADVANCED

Various Digital Signal Settings

Use the setup screen to make the “Audio 2” settings. Press the SETUP button to display the setup screen, then operate as described under “Making settings using the setup screen” on pages 60 and 61.

Adjusting the quality of Dolby Digital signals

Here adjust the quality of the Dolby Digital audio signals which offer a wide dynamic range. Switching the audio DRC (dynamic range compression) setting makes dialogues that are hard to hear when played on AV systems or TVs easier to understand.

Audio1Audio2 Video Language General Other

 

Audio DRC

Large

 

 

Medium

 

 

Small

 

 

Off

 

i Dynamic playback at low volume

 

Move

SETUP

Exit

Settings: Large

Medium

Small

Off*

Large: The effect is maximum.

Medium: The effect is relatively strong.

Small: The effect is minimum.

Off: Dynamic range compression is turned off.

This setting can be changed during playback.

*Factory setting

74

En

Advanced Functions

Switching the subtitle language during playback - DVDs

4 ¢

1 3 ¡

e 8 E 7

SUBTITLE

MENU

CLEAR

Switching with the remote control unit

Press the SUBTITLE button repeatedly while the DVD is playing.

When pressed once, the currently selected subtitle language is displayed. Press again to switch to other subtitle languages recorded on the DVD.

Subtitle :1 English

Subtitle :2 Spanish

HELLO!

HOLA!

English

Notes:

The subtitle language can only be switched when multiple subtitle languages are recorded on the DVD.

To turn the subtitles off, press the SUBTITLE button, then press the CLEAR button. With some discs it is not possible to turn the subtitles off.

With DVDs, the subtitle language can also be switched using the disc’s menu screen. To do so, press the MENU button to display the menu screen, then select the subtitle language.

When the resume function is turned off or when the disc is removed from the player, the subtitle language selected here is canceled and the subtitle language returns to the language selected under “Setting the subtitle language” (page 63) on the setup screen. When the resume function is on, however, the subtitle language selected here is valid.

FUNCTIONS ADVANCED

75

En

Advanced Functions

Switching with the setup screen

FUNCTIONS ADVANCED

76

Press the SETUP button while the DVD is playing to display the setup screen (page 57), then perform the operation described below.

3

1 From the “Other” tab on the

1, 2

setup screen, use the cursor

buttons (5/ ) to select

“Change Subtitles”, then press

SETUP

 

 

the cursor button (3).

 

Audio1 2 Video Language General Other

 

Change OSD – ExpertOff

 

Change Audio –

 

Change Subtitle 2: French

 

Change Angle –

 

Title Search – 2(/3)

 

Chapter Search – 3(/23)

 

Move

 

 

+/–

ENTER Select SETUP

Exit

2Use the cursor buttons (5/ ) to select the desired subtitle

language.

 

 

 

 

Audio1 2 Video Language General Other

 

Change OSD – ExpertOff

 

 

Change Audio –

 

 

 

Change Subtitle

1: English

 

Change Angle –

 

 

 

Title Search – 2(/3)

 

 

Chapter Search – 3(/23)

 

 

Move

 

 

 

 

+/–

ENTER

Select

SETUP

Exit

3 Press the ENTER button.

The subtitle language switches.

Note:

This setting cannot be switched while in the stop mode.

En

Advanced Functions

Switching the audio language during playback - DVDs

Switching with the remote control unit

AUDIO

MENU

4 ¢

1 3 ¡

e 8 E 7

Press the AUDIO button repeatedly while the DVD is playing.

When pressed once, the currently selected audio language is displayed. Press again to switch to other audio languages recorded on the DVD.

 

Dolby Digital

 

 

Dolby Digital

Audio

: 1 English

5.1CH

 

Audio

: 2 Spanish

5.1CH

HELLO

HOLA

English

Notes:

The audio language can only be switched when multiple audio languages are recorded on the DVD.

The DVD’s audio language can also be switched using the disc’s menu screen. To do so, first press the MENU button to display the menu screen.

When the resume function is turned off or when the disc is removed from the player, the audio language selected here is canceled and the audio language returns to the language selected under “Setting the audio language” (page 64) on the setup screen. When the resume function is on, however, the audio language selected here is valid.

FUNCTIONS ADVANCED

77

En

Advanced Functions

Switching with the setup screen

FUNCTIONS ADVANCED

78

Press the SETUP button while the DVD is playing to display the setup screen (page 57), then perform the operation described below.

3

1 From the “Other” tab on the

1, 2

setup screen, use the cursor

buttons (5/ ) to select

“Change Audio”, then press

SETUP

 

 

the cursor button (3).

 

Audio1 2 Video Language General Other

 

Change OSD –

 

Change Audio 1: English

 

Change Subtitle – 1: Dolby Digital 5.1CH

Change Angle –

 

 

Title Search – 2(/3)

 

Chapter Search – 3(/23)

 

Move

 

+/–

ENTER Select SETUP

Exit

2Use the cursor buttons (5/ ) to select the desired audio

language.

 

 

 

 

Audio1 2 Video Language General Other

 

Change OSD –

 

 

 

Change Audio

2: French

 

Change Subtitle – 1: Dolby Digital 5.1CH

Change Angle –

 

 

 

Title Search – 2(/3)

 

 

Chapter Search – 3(/23)

 

 

Move

 

 

 

 

+/–

ENTER

Select

SETUP

Exit

3 Press the ENTER button.

The audio language switches.

Note:

This setting cannot be switched while in the stop mode.

En

Advanced Functions

Switching the audio mode (video CDs and video CDs with PBC)

 

 

 

Switching with the remote control unit

 

 

 

Press the AUDIO button

 

 

 

repeatedly while playing a video

 

 

AUDIO

CD.

 

 

 

The audio mode switches between stereo,

4

 

¢

1/L and 2/R each time the button is

 

pressed.

1

3

¡

 

e

8

E 7

 

 

 

 

Audio :Stereo

Audio :1/L

Audio :2/R

English

FUNCTIONS ADVANCED

79

En

FUNCTIONS ADVANCED

Advanced Functions

Switching the audio mode (video CDs and video CDs with PBC)

Switching with the setup screen

Video CD

Press the SETUP button while the

3video CD is playing to display the setup screen (page 57), then perform the

1, 2

operation described below.

1 From the “Other” tab on the

 

SETUP

setup screen, use the cursor

 

buttons (5/ ) to select

“Change Audio”, then press

the cursor button (3).

 

Audio1 2 Video Language General Other

 

Change OSD

 

Change Audio Stereo

 

Track Serach – 1/L

 

 

2/R

 

Move

ENTER Select SETUP

Exit

2 Use the cursor buttons (5/ ) to select the desired audio

mode.

 

 

 

 

Audio1 2 Video Language General Other

 

Change OSD

 

 

 

Change Audio

Stereo

 

 

Track Serach – 1/L

 

 

 

 

2/R

 

 

Move

ENTER

Select

SETUP

Exit

Note:

3 Press the ENTER button.

This setting cannot be switched while in the

The audio mode switches.

stop mode.

80

En

Advanced Functions

Switching the audio mode (video CDs and video CDs with PBC)

Switching with the setup screen

Video CD with PBC

 

Press the SETUP button while the

3

video CD is playing to display the setup

screen (page 57), then perform the

 

1, 2

operation described below.

1 From the “Other” tab on the

 

SETUP

setup screen, use the cursor

 

buttons (5/ ) to select

 

“Change Audio”, then press

 

the cursor button (3).

 

 

 

 

 

 

 

 

 

 

 

 

Audio1

2

Video

Language

General Other

 

 

 

 

 

Change OSD – Off

 

 

 

 

 

 

 

 

 

 

 

 

Change Audio

 

Stereo

 

 

 

 

 

Playback Control

– 1/L

 

 

 

 

 

 

 

 

 

 

 

2/R

 

 

 

 

 

 

 

Move

 

Select

 

Exit

 

 

 

 

 

 

 

ENTER

SETUP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

English

Note:

This setting cannot be switched while in the stop mode.

2 Use the cursor buttons (5/ )

 

to select the desired audio

ADVANCED

mode.

 

 

Audio1 2 Video Language General Other

 

Change OSD – Off

 

Change Audio Stereo

 

FUNCTIONS

Playback Control – 1/L

 

 

2/R

 

Move

ENTER Select SETUP

Exit

3 Press the ENTER button.

 

The audio mode switches.

81

En

Advanced Functions

Searching for a specific scene

Use the procedure described below to search for specific titles or chapters on DVDs or tracks on video CDs and CDs.

 

 

 

 

MENU

3

4

 

¢

 

1

3

¡

CLEAR

2

e

8

E

7

1

2

FUNCTIONS ADVANCED

Notes:

• For some discs the search function is prohibited. In this case the mark appears on the screen.

• For some discs the title menu may not be 82 displayed.

Searching by title number - DVDs

Operation from the remote control unit

1Press the SEARCH MODE button once.

2Press the number buttons while pressing the SHIFT

button.

To select title number 10, press number buttons 1 and 0 while pressing the SHIFT button.

If you press the wrong number button, press the CLEAR button once, then input the number again. When the CLEAR button is pressed again, the search mode is canceled.

3 Press the PLAY button.

The specified title number is played.

Hint:

For some discs it is also possible to select the title number using the menu. In this case, press the MENU button to display the menu, then select the desired title number.

Searching directly

In the stop mode, press the number buttons while pressing the SHIFT button to search directly. To select title number 10, press number buttons +10 and 0 while pressing the SHIFT button.

En

Searching for a specific scene

Advanced Functions

Operation from the main unit

Press the SETUP button to display the

English

setup screen (page 57), then perform the operation described below.

3

1 From the “Other” tab on the

1, 2

setup screen, use the cursor

buttons (5/ ) to select “Title

Search”, then press the cursor

SETUP

 

 

 

button (3).

 

 

 

Audio1 2 Video Language General Other

 

Change OSD – Off

 

 

Change Audio – 1: English

 

Change Subtitle – 1: English

 

Change Angle –

 

 

Title Search

1/3

 

Chapter Search –

 

 

Move

 

 

 

+/–

ENTER Select

SETUP

Exit

2 Use the cursor buttons (5/ ) to select the desired title

number.

 

 

 

 

ADVANCED

Audio1 2 Video Language General Other

 

Change OSD – Off

 

 

Change Audio –

1: English

 

Change Subtitle – 1: English

 

 

FUNCTIONS

Change Angle –

 

 

 

Title Search

 

2/3

 

Chapter Search –

 

 

 

Move

 

 

 

 

+/–

ENTER

Select

SETUP

Exit

 

 

 

 

 

3 Press the ENTER button.

The specified title number is played.

83

En

Advanced Functions

Searching for a specific scene

Searching by chapter number - DVDs

Operation from the remote control unit

 

 

 

 

MENU

3

4

 

¢

 

1

3

¡

CLEAR

2

e

8

E

7

1

2

FUNCTIONS ADVANCED

Note:

For some discs the search function is prohibited. In this case the mark

84 appears on the screen.

1Press the SEARCH MODE button twice.

2Press the number buttons while pressing the SHIFT

button.

To select chapter number 10, press number buttons 1 and then 0 while pressing the SHIFT button.

If you press the wrong number button, press the CLEAR button once, then input the number again. When the CLEAR button is pressed again, the search mode is canceled.

3 Press the PLAY button.

Playback starts from the specified chapter number.

Hints:

For some discs it is also possible to select the chapter number by pressing the number buttons while pressing the SHIFT button in the play mode. To select title number 10, press number buttons

+10 and 0 while pressing the SHIFT button.

For some discs it is also possible to select the chapter number using the disc’s menu. In this case, press the MENU button to display the menu, then select the desired chapter number.

En

Advanced Functions

Searching for a specific scene

 

Operation from the main unit

 

 

Press the SETUP button to display the

 

setup screen (page 57), then perform

3

the operation described below.

 

 

 

 

 

 

 

 

 

 

 

 

 

1 From the “Other” tab on the

1, 2

 

setup screen, use the cursor

 

buttons (5/ ) to select

 

 

SETUP

 

“Chapter Search”, then press

 

the cursor button (3).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio1

2

Video

Language

General Other

 

 

 

 

 

Change OSD – Off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Change Audio – 1: English

 

 

 

 

 

Change Subtitle – 1: English

 

 

 

 

 

 

Change Angle – 2(/3)

 

 

 

 

 

 

 

 

 

 

 

Title Search –

 

 

 

 

 

 

 

 

 

Chapter Search

 

 

1/23

 

 

 

 

 

 

 

Move

 

 

 

 

 

 

 

 

 

 

 

 

+/–

 

Select

 

 

 

Exit

 

 

 

 

 

ENTER

 

SETUP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

English

2Use the cursor buttons (5/ ) to select the desired chapter

number.

 

 

 

ADVANCED

Audio1 2 Video Language General Other

 

Change OSD – Off

 

 

Change Audio – 1: English

 

Change Subtitle – 1: English

 

FUNCTIONS

Change Angle – 2(/3)

 

 

Title Search –

 

 

Chapter Search

10/23

 

Move

 

 

 

+/–

ENTER Select

SETUP

Exit

 

 

 

 

3 Press the ENTER button.

Playback starts from the specified

chapter number.

85

En

FUNCTIONS ADVANCED

Advanced Functions

Searching for a specific scene

 

Searching by track number - Video CDs and CDs

 

 

 

 

Operation from the main unit

 

 

Press the SETUP button to display the

3

setup screen (page 57), then perform

 

the operation described below.

1, 2

1 From the “Other” tab on the

 

setup screen, use the cursor

SETUP

buttons (5/ ) to select “Track

Search”, then press the cursor button (3).

Audio1 2 Video Language General Other

 

Change OSD – Off

 

 

Change Audio –

 

 

 

Track Search

 

1/12

 

Move

 

 

 

 

+/–

ENTER

Select

SETUP

Exit

2 Use the cursor buttons (5/ ) to select the desired track

number.

 

 

 

 

Audio1 2 Video Language General Other

 

Change OSD – Off

 

 

Change Audio –

 

 

 

Track Search

10/12

 

Move

 

 

 

 

+/–

ENTER

Select

SETUP

Exit

 

3 Press the ENTER button.

86

Playback starts from the specified track

number.

En

Advanced Functions

Searching for a specific scene

Operation from the remote control unit

3

2

2

4 ¢

1 3 ¡

e 8 E 7

MENU

CLEAR

1

1Press the SEARCH MODE button once.

2Press the number buttons while pressing the SHIFT

button.

To select track number 10, press number buttons 1 and then 0 while pressing the SHIFT button.

If you press the wrong number button, press the CLEAR button once, then input the number again. When the CLEAR button is pressed again, the search mode is canceled.

3 Press the PLAY button.

Playback starts from the specified track number.

Hint:

It is also possible to select the track number by pressing the number buttons while pressing the SHIFT button in the play mode. To select track number 10, press number buttons +10 and 0 while pressing the SHIFT button.

English

FUNCTIONS ADVANCED

87

En

Advanced Functions

Searching for a specific scene

Remote control unit only

 

 

 

 

MENU

3

4

 

¢

 

1

3

¡

CLEAR

2

e

8

E

7

1

2

FUNCTIONS ADVANCED

88

Searching by time - DVDs and video CDs

1For DVDs, press the SEARCH MODE button three times

during playback.

For video CDs, press the SEARCH MODE button twice.

2Press the number buttons while pressing the SHIFT button to specify the time.

For example, to specify 25 minutes, 42 seconds, press number buttons 2, 5, 4, then 2.

To specify 100 minutes, press number buttons 1, 0, 0, 0 then 0.

If you press the wrong number button, press the CLEAR button once, then input the number again. When the CLEAR button is pressed again, the search mode is canceled.

3 Press the PLAY button.

Playback starts from the scene at the specified time.

Notes:

For both DVDs and video CDs, playback may start from a slightly different position from the specified time.

With DVDs it is not possible to search by time while in the stop mode.

It is not possible to search by time during PBC playback of video CDs.

For some discs the search function is

prohibited. In this case the mark appears on the screen.

En

 

 

 

Advanced Functions

Selecting the menu number on video CDs with PBC

 

Main unit

 

During playback, press the SETUP

 

 

button to display the setup screen

 

 

(page 57), then perform the operation

 

 

described below.

 

 

1, 2

1 From the “Other” tab on the

 

setup screen, use the cursor

3

 

SETUP

buttons (5/ ) to select

 

“Playback Control”.

 

 

 

 

Audio1 2 Video Language General Other

 

 

Change OSD – Off

 

 

Change Audio – Stereo

 

 

Playback Control 1(/99)

Remote control unit

 

 

 

 

 

Move

ENTER Select SETUP Exit

English

3 1, 2

SETUP

4 ¢

1 3 ¡

e 8 E 7

2Press the cursor button (3), then use the cursor buttons

(5/ ) to select the number.

ADVANCED

Audio1 2 Video Language General Other

 

 

 

Change OSD – Off

 

 

 

Change Audio – Stereo

 

 

Playback Control

1/99

 

FUNCTIONS

Move

 

 

 

 

 

 

 

+/–

ENTER Select

SETUP

Exit

 

3 Press the ENTER button.

 

Playback starts from the specified

Hint:

number.

 

For some discs, some menu options cannot

89

be selected.

En

Advanced Functions

Stopping the picture (still frame mode) - DVDs and video CDs

Main unit

Play/pause button

Remote control unit

4 ¢

PLAY

1 3 ¡

PAUSE

e 8 E 7

Operation from the main unit

Press the play/pause button during playback.

Operation from the remote control unit

Press the PAUSE button during playback.

1Hint:

With DVDs, if the picture is shaky, switch the pause mode setting on the setup screen to “Field” (see below).

Press the PLAY or PAUSE button to cancel the still frame mode.

Switching the still frame mode

Use this function to stop the picture from shaking and achieve a clearer picture when the DVD is set to the pause mode. Press the SETUP button to display the setup screen, then operate as described under “Making settings using the setup screen” on pages 60 and 61. Switch the setup screen to the expert mode before making this setting. (Page 62)

ADVANCED

 

Still Picture

Field

 

Auto: The mode automatically

 

 

 

 

 

Field: In this mode, shakiness of still

 

Audio1 2 Video Language General Other

 

pictures is eliminated.

 

 

TV Screen – Off

 

Frame: This is the normal mode.

 

 

Picture Quality – Standard

 

 

 

 

 

FUNCTIONS

On Screen Diplay – Frame

 

This setting can be changed during

 

 

OSD Position – Auto

 

switches between field and frame.

 

 

Angle Indicator – On

 

 

 

 

Move

SETUP

Exit

 

 

Settings:

Field

 

 

playback.

 

 

 

 

 

 

Frame

 

 

Note:

 

 

Auto*

 

 

 

 

 

 

For some discs the picture may not be

 

 

 

 

 

 

90

 

*Factory setting

clearer in the “Field” mode.

 

 

 

 

 

 

En

 

 

 

 

Advanced Functions

Playing one step at a time (step-by-step playback) - DVDs and video CDs

Main unit

Previous and next buttons

Play button

Remote control unit

4 ¢

PLAY

1 3 ¡

STEP/SLOW

e 8 E 7

Operation from the main unit

In the still frame (pause) mode, press the previous or next button repeatedly to move forward or backward step-by- step.

4 : Reverse direction ¢ : Forward direction

Operation from the remote control unit

In the still frame (pause) mode, press the STEP/SLOW button repeatedly to move forward or backward step-by-step.

e : Reverse direction E : Forward direction

Hint:

Press the play button to cancel step-by- step playback.

In the reverse direction, the picture moves back little by little each time the button is pressed.

Note:

It is not possible to play video CDs step-by- step in the reverse direction.

English

FUNCTIONS ADVANCED

91

En

Advanced Functions

Viewing in slow motion - DVDs and video CDs

Main unit

Previous and next buttons

Play button

Remote control unit

 

4

 

¢

PLAY

 

1

3

¡

ADVANCED

 

STEP/SLOW

 

 

 

 

 

 

 

 

e

8

E

7

FUNCTIONS

modes.

 

 

 

 

Notes:

 

 

 

 

• No sound is produced during the still

 

frame, step-by-step and slow motion play

 

• The pause, step-by-step play and slow

 

motion play modes cannot be set for

 

some discs. In this case the

or

 

mark appears on the screen.

 

92

• It is not possible to play video CDs in slow

motion in the reverse direction.

En

Operation from the main unit

In the still frame (pause) mode, press and hold the previous or next button.

4 : Reverse direction ¢ : Forward direction

To change the slow motion playing speed:

Press the 4or ¢button during the slow motion mode to adjust the speed in four

steps. +

4

1/16- 1/8- 1/4- 1/2

¢

=

• Press the play button to cancel the slow motion mode.

• The speed cannot be adjusted during slow motion in the reverse direction.

Operation from the remote control unit

In the still frame (pause) mode, press and hold the STEP/SLOW button.

e : Reverse direction E : Forward direction

1

To change the slow motion playing speed:

Press the eor Ebutton during the slow motion mode to adjust the speed in four steps.

+e

1/16- 1/8- 1/4- 1/2

E=

Press the PLAY button to cancel the slow motion mode.

The speed cannot be adjusted during slow motion in the reverse direction.

Advanced Functions

Repeat play - DVDs, video CDs and CDs

Remote control unit only

4 ¢

1

3

¡

CLEAR

 

e

8

E 7

 

REPEAT

Remote control unit only

4

 

¢

 

1

3

¡

CLEAR

e

8

E

7

REPEAT

Notes:

With some DVDs, some titles cannot be played repeatedly. In this case the mark appears on the screen.

Repeat playback is not possible during PBC playback on video CDs.

When the REPEAT button is pressed during programmed playback (page 96), the program is played repeatedly.

Playing chapters or tracks repeatedly

Press the REPEAT button once during playback of the chapter or track you want to repeat.

The following message appears on the display window:

1

The currently playing chapter or track is played repeatedly.

Press the CLEAR button to cancel the repeat play mode. The repeat mode is canceled but playback continues.

For CDs and video CDs, the current track is played repeatedly.

Playing titles repeatedly

Press the REPEAT button twice during playback of the title you want to repeat.

The following message appears on the display window:

TITLE

The currently playing title is played repeatedly.

Press the CLEAR button to cancel the repeat play mode.

For CDs and video CDs, one disc corresponds to one title, so all the tracks on the disc are played repeatedly.

English

FUNCTIONS ADVANCED

93

En

Advanced Functions

Remote control unit only

4 ¢

1 3 ¡

CLEAR

e 8 E 7

A-B REPEAT

Remote control unit only

Playing a specific section repeatedly

During playback, press the A-B REPEAT button once at the beginning of the section you want to repeat then again at the end of the section you want to repeat.

The following message appears on the display window:

AB

The specified section is played repeatedly.

Press the CLEAR button to cancel the repeat play mode.

The operation is the same for CDs and video CDs.

 

4

 

¢

 

 

2

 

 

CLEAR

 

1

3

¡

 

 

 

e

8

E 7

1

 

 

 

 

ADVANCED

Notes:

 

 

 

FUNCTIONS

 

 

 

PBC playback on video CDs.

 

• With some DVDs, some titles cannot be played repeatedly. In this case the mark appears on the screen.

• Repeat playback is not possible during

• When the REPEAT button is pressed during programmed playback (page 96), the program is played repeatedly.

94

Returning to a specific point

1Use the A-B REPEAT button to specify the section to be

repeated.

The following message appears on the display window:

A

2 To return, press the PLAY button.

The disc returns to the specified point.

Press the CLEAR button to cancel the repeat play mode.

The operation is the same for CDs and video CDs.

En

Advanced Functions

Playing in random order (random play) - DVDs, video CDs and CDs

Use the procedure described below to play titles or chapters on DVDs or tracks

on video CDs and CDs in random order.

Remote control unit only

 

 

 

ENTER

4

 

¢

PREV and NEXT

 

 

1

3

¡

buttons

e

8

E

CLEAR

7

RANDOM

DVD

Playing chapters in random order

During playback, press the RANDOM button once, then press the ENTER button.

“Random Chapter” appears on the display and the chapters within the title are played in random order.

Playing titles in random order

During playback, press the RANDOM button twice, then press the ENTER button.

English

Hint:

When the NEXT button is pressed, the player selects the next chapter or track and that chapter or track is played.

When the PREVIOUS button is pressed, playback returns to the beginning of the currently playing chapter or track.

“Random Title” appears on the display and the titles are played in random order.

Video CD CD

 

Playing tracks in random order

ADVANCED

 

During playback, press the

 

RANDOM button.

 

“Random” appears on the display and the

FUNCTIONS

tracks are played in random order.

 

 

 

DVD Video CD CD

 

 

 

Stopping random playback

 

 

 

Press the CLEAR button.

 

Normal playback resumes and the chapters

 

or tracks following the current chapter or

 

track are played in order.

95

En

Advanced Functions

Programmed playback - DVDs

Use the following procedure to play DVDs in a desired order. Up to 24 steps can be programmed.

1 Press the PROGRAM button.

Remote control unit only

The program screen appears.

5 2, 3

 

Program Chapter

Program Title

 

 

Current:

Title

1

Chapter 1

 

Title

1 (Chapter 1 – 30)

 

— — — — — — — —

 

— — — — — — — —

 

— — — — — — — —

 

Program Memory – Off

 

 

4

¢

 

 

 

 

Move

Play

 

PROGRAM Exit

1

3 ¡

 

 

 

Number

e 8 E 7

buttons

 

1

2 Use the cursor buttons (2/3)

to select “Program Chapter”

 

SHIFT

or “Program Title”.

 

Program Chapter Program Title

Program Title

 

To select chapters

To select titles

FUNCTIONS ADVANCED

Notes:

Programmed playback is not possible during PBC playback on video CDs.

Scenes from chapters that are not programmed may appear when the chapter switches, but this is not a malfunction.

Programming is not possible with some DVDs. In this case the mark appears on the screen.

When programming chapters, only

chapters within the same title can be 96 programmed.

3 Press the cursor button ( ) to move to the program input/editing window.

To change the number of the title to be programmed at the “Program Chapter” screen, press the cursor button (5) while at the top step of the program input/editing window, then press the number buttons while pressing the SHIFT button to specify the desired title.

Program Chapter Program Title

Current:

Title

1 Chapter 2

Title

 

1

(Chapter 1

– 30)

09 07

18 — — — —

— — — — — — —

— — — — — — —

Program Memory – Off

Move

 

+/–

Play PROGRAM Exit

En

Advanced Functions

• When “Program Title” is selected, use the cursor buttons to refer to

 

 

 

 

the title numbers, then press the

 

 

 

 

SHIFT button and number

5

 

 

 

buttons to input the title numbers.

 

 

 

 

 

 

 

4

 

¢

Program Chapter

Program Title

 

 

Current:

Title

1(/2)

 

 

 

CLEAR

 

1

3

¡

 

 

 

4

e

8

PLAY

09 07 18

— — —

E 7

— — — — — — — —

 

 

 

 

 

 

PROGRAM

— — — — — — — —

 

 

 

 

Program Memory – Off

 

4

 

 

 

Move

Play

PROGRAM Exit

English

4Press the number buttons while pressing the SHIFT button to specify the titles or chapters in the order in which

you want to play them.

For example, to program titles or chapters 9, 7 and 18, press 9, 7, +10 then 8.

Program Chapter Program Title

Current:

Title

1 Chapter 2

Title

1

(Chapter 1

– 30)

09

07

18

— — —

— — — — — — —

— — — — — — —

Program Memory – Off

Move

 

Play

PROGRAM

Exit

5 Press the ENTER button.

Playback begins in the programmed order.

Press the CLEAR button to stop programmed playback.

Press the PROGRAM button to return to the previous screen. Programmed playback does not start until the PLAY or ENTER button is pressed.

FUNCTIONS ADVANCED

97

En

FUNCTIONS ADVANCED

Advanced Functions

Programmed playback - Video CDs and CDs

Use the following procedure to play video CDs or CDs in the desired order. Up to 24 steps can be programmed.

Remote control unit only

 

1 Press the PROGRAM button.

 

 

 

 

 

The program screen appears.

3

 

 

 

 

Program Track

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Current:

 

Track

2(/2)

 

4

 

¢

 

Total Time

 

 

0:00

 

 

 

— — — — — — —

 

 

 

 

 

PLAY

1

3

¡

CLEAR

— — — — —

 

 

 

 

— — — — —

2

e

8

E

7

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

Move

Play

PROGRAM Exit

 

 

 

 

 

 

2

Note:

Programmed playback is not possible during PBC playback on video CDs.

2Press the number buttons while pressing the SHIFT button to specify the tracks in the order in which you want to

play them.

For example, to program tracks 9, 7 and 18, press 9, 7, +10 then 8.

3 Press the ENTER button.

Playback begins in the programmed order.

Press the CLEAR button to stop programmed playback.

Press the PROGRAM button to return to the previous screen. Programmed playback does not start until the PLAY or ENTER button is pressed.

98

En

Advanced Functions

Editing programs - DVDs, video CDs and CDs

Remote control unit only

4 ¢

1 3 ¡

PAUSE

e 8 E 7

Programming pauses

Press the PAUSE button instead of the number buttons (step 4 on page 97).

“8” appears and a pause is programmed.

Program Chapter Program Title

Current:

Title

1 Chapter 2

Title

1

(Chapter 1

– 30)

09

07

8

18

— — —

— — — — — — —

— — — — — — —

Program Memory – Off

Move

 

Play

PROGRAM

Exit

 

 

 

 

 

English

 

 

 

 

Hints:

 

 

 

 

 

 

• Pauses cannot be programmed at the first

 

 

 

 

 

or last chapters or tracks.

 

 

 

 

• Pauses cannot be programmed twice in a

 

 

 

 

 

row.

 

 

Remote control unit only

Correcting mistakes in programs

 

 

 

 

 

 

 

 

To clear the mistaken number

 

 

 

 

1

Use the cursor buttons (5/ /

 

 

 

 

1

2/3) to specify the number to

 

4

 

¢

be cleared.

 

 

 

 

2

 

 

 

 

1

3

¡

 

 

 

 

 

 

 

 

1

 

 

 

 

Program Chapter

Program Title

e

8

E 7

 

Current:

Title

1(/2)

 

 

 

 

 

 

 

 

 

09 07 18 10 19

— — —

1

 

 

 

 

— — — — — — — —

 

 

 

 

— — — — — — — —

 

 

 

 

 

 

 

 

 

 

Program Memory – Off

 

 

 

 

 

 

Move

Play

PROGRAM Exit

FUNCTIONS ADVANCED

99

Continued on next page En

Advanced Functions

2 Press the CLEAR button.

The specified number is cleared and the numbers following it move up one step.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Program Chapter

Program Title

 

 

 

 

 

 

 

Current:

Title

1(/2)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

09 07 18

19

 

— — —

 

 

 

 

 

 

— — — — — — — —

 

 

 

 

 

 

— — — — — — — —

 

 

 

 

 

 

Program Memory – Off

 

 

 

 

 

 

 

 

 

Move

 

 

 

Play

 

 

 

 

 

 

 

 

 

 

 

PROGRAM

Exit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Remote control unit only

 

 

 

 

Cursor

 

4

 

¢

buttons

Number

1

3

¡

 

 

 

 

 

buttons e

8

E

7

FUNCTIONSADVANCED

SHIFT

 

Note:

If 24 steps are already programmed, use the CLEAR button to clear a step before

100 adding a new step.

En

Adding to programs

1Use the cursor buttons (5/ /

2/3) to specify the position at which you want to add a step.

Program Chapter Program Title

Current:

Title

1(/2)

09 07 18 10 19 — — —

— — — — — — —

— — — — — — —

Program Memory – Off

Move

 

Play

PROGRAM

Exit

2 Press the number buttons while pressing the SHIFT button.

The numbers from the specified number on move to the right and the new number is inserted.

Program Chapter Program Title

Current:

Title

1(/2)

09 07 18 06 10 19 — —

— — — — — — —

— — — — — — —

Program Memory – Off

Move

 

Play

PROGRAM

Exit

1