Pioneer N-70A-k/-s, N-50A-k/-s Operating Instruction

0 (0)
Operating Instructions
Discover the benefits of registering your product online at
http://www.pioneer.co.uk
(or http://www.pioneer.eu).
N-70A-K/-S
N-50A-K/-S
NETWORK AUDIO PLAYER
2
3
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
S002*_A1_En
4
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly.
Before you start
About this product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Checking what’s in the box. . . . . . . . . . . . . . . . . . . . . . . . . 5
Loading the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Operating range of remote control . . . . . . . . . . . . . . . . . . . 5
01 Controls and displays
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
02 Connecting your equipment
About the audio connection . . . . . . . . . . . . . . . . . . . . . . . . 9
Analog audio output connections. . . . . . . . . . . . . . . . . . . . 9
Digital audio connections. . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting USB storage devices . . . . . . . . . . . . . . . . . . . 10
Using a USB cable to connect to a computer. . . . . . . . . . 11
Connecting to the network through the LAN interface . . . 11
Connecting the other Pioneer devices and controlling
centrally . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Plugging in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
03 Getting started
Setting the unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Auto power off setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
General control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
04 iPod/iPhone playback
Confirming what iPod/iPhone models are supported . . . . 15
Playing your iPod/iPhone . . . . . . . . . . . . . . . . . . . . . . . . . 15
05 USB/External HDD playback
Playing files stored on USB storage devices. . . . . . . . . . . 17
06 Network quick setup guide
Connect to the network . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Try using network functions . . . . . . . . . . . . . . . . . . . . . . . 19
07 Perform network settings
Network setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Setting the network standby function . . . . . . . . . . . . . . . . 26
Friendly Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Listening to the Internet radio . . . . . . . . . . . . . . . . . . . . . 26
Advanced operations for the Internet radio. . . . . . . . . . . . 27
About the Spotify audio stream playback function . . . . . . 27
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Playing audio files stored on computers or other
components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
08 Using other functions
Using the Sound mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
For greatest fidelity to the original sound . . . . . . . . . . . . . 30
Using the D/A converter . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Adjust the DAC lock range (N-70A only) . . . . . . . . . . . . . . 31
Switch digital filter (N-70A only) . . . . . . . . . . . . . . . . . . . . 31
Set the phase (N-70A only) . . . . . . . . . . . . . . . . . . . . . . . . 31
Toggle between output/settings output for digital audio . . 31
Language setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
09 Additional information
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Firmware Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Resetting this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Cautions on use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
About network playback . . . . . . . . . . . . . . . . . . . . . . . . . . 37
About playable file formats . . . . . . . . . . . . . . . . . . . . . . . . 38
Windows 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
About iPod/iPhone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
About Spotify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Contents
5
Before you start
About this product
This operating Instructions uses simplified illustrations of the
product. Everything as shown in this operating Instructions
may differ from the actual display on the product.
Checking what’s in the box
Please check that you’ve received the following supplied
accessories:
Remote control
Power cord
AAA size IEC R03 dry cell batteries (to confirm system
operation) x 2
RCA audio cable
Warranty card
Quick Start Guide
Safety brochure
These operating instructions (CD-ROM)
SOURCE
/I STANDBY/ON
STANDBY
iPod/iPhone
5V 1A
DIRECT Hi-Bit 32 Up Sampling
SOURCE
 
NETWORK AUDIO PLAYER
N-50A
N-50A
N-70A
Loading the batteries
The batteries included with the unit have been provided to
allow you check product operation and may not last long. We
recommend using alkaline batteries that have a longer life.
WARNING
Do not use or store batteries in direct sunlight or other
excessively hot place, such as inside a car or near a heater.
This can cause batteries to leak, overheat, explode or catch
fire. It can also reduce the life or performance of batteries.
CAUTION
Incorrect use of batteries may result in such hazards as
leakage and bursting. Observe the following precautions:
-
Never use new and old batteries together.
-
Insert the plus and minus sides of the batteries properly
according to the marks in the battery case.
-
Batteries with the same shape may have different
voltages. Do not use different batteries together.
-
When disposing of used batteries, please comply with
governmental regulations or environmental public
institution’s rules that apply in your country/area.
-
When inserting the batteries, make sure not to damage
the springs on the battery’s (–) terminals. This can cause
batteries to leak or overheat.
Operating range of remote control
The remote has a range of about 7 m at an angle of about 30°
from the remote sensor.
Keep in mind the following when using the remote control:
Make sure that there are no obstacles between the remote
and the remote sensor on the unit.
Remote operation may become unreliable if strong sunlight
or fluorescent light is shining on the unit’s remote sensor.
Remote controllers for different devices can interfere with
each other. Avoid using remotes for other equipment
located close to this unit.
Replace the batteries when you notice a fall off in the
operating range of the remote.
/I STANDBY/ON
STANDBY
iPod/iPhone
5V
1A
DIRECT Hi-Bit32
Up Sampling
30°
30°
7 m
6
1
1
Controls and displays
Front panel
1
/I STANDBY/ON
Press to turn the power on and off.
The button’s center power indicator lights when power is on.
2
STANDBY indicator
Lights when the power is standby.
3
DIRECT indicator
Lights when the DIRECT mode switched on.
Hi-Bit 32 indicator
Lights when the Hi-Bit 32 mode switched on.
Up Sampling indicator
Lights when the Up Sampling mode switched on.
4
iPod/iPhone port
Use to connect your Apple iPod/iPhone (page 15) or connect a USB device/External HDD
(page 10)
.
5
Remote sensor
Receives the signals from the remote control (page 5).
6
Display
7
SOURCE
Use to change the input source.
8
Press to stop playback.
9
Press to start playback. During playback, pause/unpause playback.
10
 
Press to return to the beginning of the currently playing file. Hold down to fast-rewind.
(Depending on the input function selected, it may not be possible to return to the beginning
of the currently playing file.)
 
Press to skip to the beginning of the next file. Hold down to fast-forward.
11
PHONES terminal (N-70A only)
Connect headphones.
12
PHONES LEVEL (N-70A only)
Adjusts the volume of the headphone.
Tip
While the Initial Setup screen or track select screen is displayed, the following buttons on
the unit can be used to move up and down, enter or return.
  :
  :
: Enter
: Return
SOURCE
/I STANDBY/ON
STANDBY
iPod/iPhone
5V 1A
DIRECT Hi-Bit 32 Up Sampling
SOURCE
 
NETWORK AUDIO PLAYER
N-50A
N-50A
N-70A
2 3 4 5
6
1 7 8 9 10
11 12
7
Controls and displays
1
1
Display
1
Input source
2
DIGITAL OUT
Displayed when the DIGITAL OUT setting is On.
3
Network connection status
When the unit is connected to the network, this
indicator lights.
When the unit that is connected to the LAN cable is
not connected to the network, this indicator lights. When
the LAN cable is not connected to this unit, this indicator
does not lights.
4
Name of folder/file/artist/album/station, etc.
5
File information
Displays file format, sampling rate and quantization bitrate.
6
Play status
7
Elapsed playing time
Remaining playing time
8
Artwork
Displayed when the currently playing file includes an album
jacket image, etc.
9
Play bar
Displays the status of file playback. May not be displayed
depending on the input or the file.
10
Repeat and Shuffle
Repeat all files.
Repeat a file.
Shuffle
11
SOUND feature indicator
L.R.A
Displayed when the Lock Range Adjust setting is set to
anything other than Range 7 (Initial setting).
ASR
Lights when the Auto Sound Retriever switched on.
A.L.C
Lights when the Auto Level Control switched on.
3:45 / -5:23
ASR A.L.CL.R.A
FLAC
176.4
kHz / 24bit
Music Server
Song 1
Artist
Album
DIGITAL OUT
1 2
4
7
8
9
5
6
10 11
3
1
8
Controls and displays
1
1
Remote control
1
STANDBY/ON
This button operates when the unit’s main /I STANDBY/ON
button is set to ON. Each time this button is pressed, the
unit’s status alternates between ON and STANDBY modes.
2
DIRECT
Directly output the input signal.
3
Hi-Bit 32
Press this button to turn on the SOUND mode’s Hi-Bit 32
function. Expands the dynamic range for digital audio signals.
Re-quantization of 16 bit to 24 bit audio as 32 bit produces
smoother and more detailed playback (page 30
).
4
A.S.R
Used when turning the Auto Sound Retriever function on/
off.
5
Function buttons
Use to change the input source.
6
SOURCE SELECT
/
Switch the unit’s input source. Each press of the button will
cycle through input sources.
7
REPEAT
Perform repeat play of files on the selected iPod/iPhone, USB
storage device/External HDD or Music Server (page 15
, 28).
8
SHUFFLE
Perform shuffle play of files on the selected iPod/iPhone, USB
storage device/External HDD or Music Server (page 15
, 28).
9
Press to return to the beginning of the currently playing file.
Depending on the input function selected, it may not be
possible to return to the beginning of the currently playing
file.
10
Press to start playback. During playback, pause/unpause
playback.
11
Hold down to fast-rewind the file. Depending on the input or
file, you may not be able to fast-rewind.
12
TOP MENU
Display the top menu screen for each input.
13
///
Use these to select items, change settings and move the
cursor.
ENTER
Use this to implement the selected item or enter a setting
that you have changed.
14
SETUP
Use this to change the settings. This button is also used to
reinitialize unit settings as described in the section Reset
(page 36
).
15
CLEAR
Press to clear the selected item. Use this for example if you
input the wrong number.
16
A.L.C
Use when turning the Auto Level Control function on/off.
17
DISPLAY
Press to turn the display off when you do not need it. When an
action is performed on the unit, the display will automatically
light, then turn off again after ten seconds. Press the button
once again to cancel the Display OFF mode.
18
Up Sampling
Switch Up Sampling setting (page 30).
19
SOUND
Turns Auto Sound Retriever, Auto Level Control, Hi-Bit 32
and Up Sampling on and off (page 30
).
20
iPod CONTROL
Each press of the button will toggle display of music
information between the iPod/iPhone screen and the front
panel of the unit.
21
DIMMER
Adjust the brightness of the display (page 14).
22
SORT
Sort the order of tracks, when using Music Server input and
the DLNA server supports the sort function.
23
Press during playback to skip ahead to the beginning of the
next file.
24
Hold down to fast-forward the file. Depending on the input or
file, you may not be able to fast-forward.
25
Press to stop playback.
26
NOW PLAYING
When pressed while the track select screen is displayed and
during playback, will switch to the playback screen.
27
RETURN
Press to return to the previous screen.
28
+Favorite
When using Internet Radio or Music Server input, register a
favorite internet radio station or track on the media server to
your Favorites (page 26
).
NETWORK AUDIO PLAYER
STANDBY/ON
DISPLAY
TOP
MENU
ENTER
SETUP
CLEAR
NOW
PLAYNG
RETURN
Favorite
DIRECT
A.S.R
iPod/USB
FRONT
MUSIC
SERVER
DIG IN 1
SOURCE SELECT
REPEAT
A.L.C
iPod/USB
REAR
NET
SERVICE
DIG IN 2
SHUFFLE
Up SamplingHi-Bit32
SOUND
iPod
CONTROL
FAVORITES
USB DAC IN
DIMMER
SORT
12
24
15
25
19
20
11
10
2
4
5
6
7
8
9
1
18
22
23
13
14
26
27
28
17
21
16
3
2
2
9
Connecting your equipment
CAUTION
Be sure to turn off the power and unplug the power cord
from the power outlet whenever making or changing
connections.
Connect the power cord after all the connections between
devices have been completed.
About the audio connection
Analog audio output connections
By connecting this unit’s analog audio output to the analog
audio input of an amplifier, you can use the amplifier to enjoy
analog audio produced from this unit.
N-70A
Note
The factory default setting for the balance terminal output
is 2-HOT/3-COLD. In order to change the setting, please
refer to Set the phase (N-70A only)
on page 31.
N-50A
Types of cables and
terminals
Transferable audio
signals
Digital (Coaxial) Conventional digital audio
Digital (Optical)
RCA (Analog)
(White/Red)
Conventional analog audio
R
ANALOG OUT
L
DIGITAL OUT
OPTICAL COAXIAL
LAN (10/100)
DC OUTPUT
For
(5V 0.6A MAX)
WIRELESS
LAN
RL RL
Pre-main amplifier, etc.,
furnished with balanced-
type input connectors
Pre-main amplifier with
RCA (pin plug) input
connectors connectors
Balanced cable
(commercially
available)
RCA Audio Cable
(supplied)
indicates the direction of the signal.
R
ANALOG OUT
L
DIGITAL OUT
OPTICAL COAXIAL
LAN (10/100)
DC OUTPUT
For
(5V 0.6A MAX)
WIRELESS
LAN
ANALOG
RL
AUDIO INPUT
Amplifier
RCA Audio Cable
(supplied)
indicates the direction of the signal.
10
2
2
Connecting your equipment
Digital audio connections
Digital audio output connections
By connecting this unit’s digital audio output to the digital
audio input of an AV receiver or D/A converter, etc, you can
use the amplifier to enjoy digital audio produced from this
unit.
Note
Digital signal formats that can be output from this unit
include linear PCM signals with sampling rate and
quantitative bits up to 192 kHz/24 bits (Depending on the
connected device and environment, operation may not be
successful).
Digital audio input connections
By connecting a digital audio component’s audio output to
this unit’s digital audio input, this unit can be used as a D/A
converter. For details regarding the audio output of signals
input to the DIGITAL IN connectors, see the section Using the
D/A converter on page 30.
Note
Digital signal formats that can be input to this unit include
linear PCM signals with sampling rate and quantitative bits
up to 192 kHz/24 bits. (Depending on the connected device
and environment, operation may not be successful.)
Connecting USB storage devices
It is possible to listen to two-channel audio using the USB
terminal on the front or the rear of this unit.
1
Connect your USB device/External HDD to the USB
terminal on the front panel of this unit.
This unit does not support a USB hub.
Note
If you are using an external HDD with a power switch, make
sure that the external HDD power is turned on before
turning on the power for this unit.
When connecting or disconnecting USB devices, ensure
that the power to this unit is always off.
We recommend that you connect the external HDD to the
back of this unit. When it is connected to the front of this
unit, it may take time for the unit to recognize the external
HDD if switched to iPod/USB Front Function.
R
ANALOG OUT
L
DIGITAL OUT
OPTICAL COAXIAL OPT
I
LAN (10/100) DC OUTPUT
For
(5V 0.6A MAX)
WIRELESS
LAN
CON
T
O
U
DIGITAL IN
OPTICAL
DIGITAL IN
COAXIAL
AV receiver, D/A
converter, etc.
AV receiver, D/A
converter, etc.
Optical digital cable
(commercially available)
Coaxial digital cable
(commercially available)
indicates the direction of the signal.
COAXIAL OPTICAL COAXIAL
1
2
DIGITAL IN
DIGITAL IN
USB DAC
5V 1A
AC IN
For
V 0.6A MAX)
WIRELESS
LAN
iPod/iPhone
CONTROL
OUT
DIGITAL OUT
COAXIAL
DIGITAL OUT
OPTICAL
Digital audio
equipment, etc.
Digital audio
equipment, etc.
Optical digital cable
(commercially available)
Coaxial digital cable
(commercially available)
indicates the direction of the signal.
R
ANALOG OUT
L
OPTICAL COAXIAL
12
DIGITAL IN
DIGITAL IN
DC OUTPUT
For
AC IN
WIRELESS
LAN
DIGITAL OUT
OPTICAL COAXIAL
LAN (10/100)
CONTROL
OUT
USB DAC
5V 1A
iPod/iPhone
(5V 0.6A MAX)
SOURCE
/I STANDBY/ON
STANDBY
iPod/iPhone
5V 1A
DIRECT Hi-Bit 32 Up Sampling
SOURCE
 
NETWORK AUDIO PLAYER
N-50A
USB storage device
(commercially available)
USB storage device
(commercially available)
Front panel
Rear panel
USB cable (commercially
available)
USB cable (commercially available)
External HDD*1,
and such
External HDD*1,
and such
*1: If the external HDD has multiple partitions,
the head partition must be formatted as FAT32.
Furthermore, only the head partition can be used.
11
2
2
Connecting your equipment
Using a USB cable to connect to a computer
By using a USB cable (sold separately) to connect this unit’s
USB DAC port to the USB port on a computer, this unit can be
used as a D/A converter.
For details regarding the output of signals input to the USB
DAC port, see section Playing music from a computer on
page 30
.
Note
When using this connection to input audio files from a
computer to this unit, it may be necessary to install a
special driver on the computer. For details, see the website
of Pioneer.
This unit cannot be used to play audio files from a computer
unless Media Player is installed on the connected
computer.
Connecting to the network through the LAN
interface
By connecting this unit to the network via the LAN interface,
you can play back audio files stored on components on the
network, including your PC, and listen to Internet radio
stations.
Connect the LAN terminal on this unit to the LAN terminal on
your router (with or without the built-in DHCP server function)
with a straight LAN cable (CAT 5 or higher).
Turn on the DHCP server function of your router. If your router
does not have a built-in DHCP server function, you have to set
up the network manually. For details, see page 25
.
Note
In order to connect to the Internet, you must conclude a
contract with an Internet Service Provider (ISP).
To listen to Internet radio stations, you must sign a contract
with an ISP beforehand.
Photo or video files cannot be played back.
With Windows Media Player 11 or 12, you can even play
back copyrighted audio files on this unit.
Connecting using LAN cable
OPTICAL COAXIAL
12
DIGITAL IN
DIGITAL IN
USB DAC
AC IN
COAXIAL
5V 1A
For
WIRELESS
LAN
iPod/iPhone
CONTROL
OUT
USB
USB cable (commercially
available)
B-type
Computer
A-type
OPTICAL COAXIAL
12
DIGITAL IN
DIGITAL IN
DC OUTPUT
For
USB DAC
(5V 0.6A MAX)
WIRELESS
LAN
DIGITAL OUT
OPTICAL COAXIAL
LAN (10/100)
CONTROL
OUT
5V 1A
iPod/iPhone
WAN
321
LAN
Internet
Modem
Computer 1
Computer 2
LAN cable
(commercially
available)
12
2
2
Connecting your equipment
Connecting using wireless LAN
Wireless connection to the network is possible through a
wireless LAN connection. Use the separately sold wireless
LAN converter (Pioneer Model No. AS-WL300) for connection.
Note
Use only the furnished accessory connecting cable.
For instructions on setting the wireless LAN converter, refer
to the operating instructions for the AS-WL300.
Connecting the other Pioneer devices and
controlling centrally
When a Pioneer Amplifier’s/CD player’s control terminal is
connected with this unit, the connected amplifier/CD player
can be operated with the Pioneer ControlApp.
Please see the following website for amplifiers/CD players
that are compatible with the Pioneer ControlApp.
http://pioneer.jp/support/soft/iapp_controlapp/en.html (for
iPhone/iPod touch)
http://pioneer.jp/support/soft/aapp_controlapp/en.html (for
Android)
You can also centrally control Pioneer products with control input
terminals using this unit
s remote sensor. Those devices that do
not have remote sensors or devices that are located where it
cannot receive signals can also be operated remotely (*1).
*1: Using the unit’s remote sensor, you can remotely operate
the devices connected to this unit with their remote
controllers.
Important
When connecting the control terminals, please make sure
that the audio cable (analog connection) that is included
with the unit is also connected. The connection using the
control terminals alone will not allow proper operation of
the central control.
Note
Use a commercially available cable with mono mini-plug
(with no resistance) for connection.
When connected, the remote sensor for the amp and CD
player will cease to function, and the remote sensor on this
unit will receive the signals for the amplifier/CD player.
Point the remote control towards this unit to operate.
When this unit’s network standby is set to off, this unit
cannot operate the amplifier or CD player. They can be
operated when the network standby for this unit is set to on.
DC 5V WPS
Ethernet
LAN (10/100)
OPTICAL COAXIAL
12
OPTICAL COAXIAL
5V 1A
DC OUTPUT
For
(5V 0.6A MAX)
WIRELESS
LAN
iPod/iPhone
CONTROL
OUT
DIGITAL IN
DIGITAL IN
DIGITAL OUT
USB DAC
WAN
321
LAN
Wireless LAN
router
Modem
Internet
Wireless LAN converter (AS-WL300)
(commercially available)
Cable included with the
Wireless LAN converter
(AS-WL300)
IN
OUT
CONTROL
SOURCE
/I STANDBY/ON
STANDBY
iPod/iPhone
5V 1A
DIRECT Hi-Bit 32 Up Sampling
SOURCE
 
NETWORK AUDIO PLAYER
N-50A
CONTROL
OUT
Control cable
(commercially available)
To the CONTROL IN terminal
of other Pioneer products
with control input terminal
Other Pioneer products with
control input terminal
13
2
2
Connecting your equipment
Plugging in
Important
Before making or changing the connections, switch off the
power and disconnect the power cord from the AC outlet.
CAUTION
Do not use any power cord other than the one supplied with
this unit.
Do not use the supplied power cord for any purpose other
than that described below.
After you’ve finished making all connections, plug the unit
into an AC outlet.
1
Plug the supplied power cord into the AC IN socket on
the back of the unit.
2
Plug the other end into a power outlet.
AC IN
To AC outlet
Power cord
Loading...
+ 29 hidden pages