DIGITAL MEDIA RECEIVER
RÉCEPTEUR MÉDIA NUMÉRIQUE
RECEPTOR DE MEDIOS DIGITALES
MVH-S600BS |
Owner’s Manual |
MVH-S400BT |
Mode d’emploi |
Manual de instrucciones |
Español Français English
Important (Serial number)
The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.
Important (Numéro de série)
Le numéro de série se trouve au bas de cet appareil. Pour votre sécurité et votre commodité, veillez à noter ce numéro sur la carte de garantie fournie.
Importante (Número de serie)
El número de serie se encuentra en la parte inferior de esta unidad. Por su propia seguridad y comodidad, asegúrese de anotar este número en la tarjeta de garantía que se adjunta.
Table of Contents |
|
Before You Start ....................................................................................... |
4 |
Getting Started ........................................................................................ |
6 |
Radio....................................................................................................... |
13 |
USB/iPhone/AUX .................................................................................. |
14 |
Bluetooth ............................................................................................... |
16 |
App Mode .............................................................................................. |
21 |
Pandora® ................................................................................................ |
23 |
Spotify® .................................................................................................. |
24 |
SiriusXM Satellite Radio ...................................................................... |
26 |
Using Pioneer ARC APP ....................................................................... |
30 |
Audio Adjustments .............................................................................. |
31 |
Settings .................................................................................................. |
33 |
FUNCTION settings ............................................................................... |
33 |
AUDIO settings ...................................................................................... |
36 |
SYSTEM settings .................................................................................... |
38 |
ILLUMINATION settings........................................................................ |
42 |
MIXTRAX settings.................................................................................. |
43 |
Connections/Installation .................................................................... |
45 |
Additional Information ....................................................................... |
51 |
About this manual:
•In the following instructions, a USB memory or USB audio player are referred to as “USB device”.
-2 -
English
•When an iPhone is connected to the unit, the source name on the unit appears as [iPod]. Please note that this unit supports only iPhones (iPhone 5 or later) regardless of the source name (for details, refer to page 57).
English
- 3 -
Before You Start
Thank you for purchasing this PIONEER product
To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference.
FCC ID: EW4C95
MODEL NO.: MVH-S600BS/MVH-S400BT IC: 4250A-C95
This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of this device.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
The Bluetooth antenna cannot be removed (or replaced) by user.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).
Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.
Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
The Safety of Your Ears is in Your Hands
Get the most out of your equipment by playing it at a safe level—a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving.
English
- 4 -
Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
ESTABLISH A SAFE LEVEL:
•Set your volume control at a low setting.
•Slowly increase the sound until you can hear it comfortably and clearly, without distortion.
• Once you have established a comfortable sound level, set the dial and leave it there.
BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:
•Do not turn up the volume so high that you can’t hear what’s around you.
•Use caution or temporarily discontinue use in potentially hazardous situations.
•Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas.
WARNING
•Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards.
•Do not attempt to operate the unit while driving. Make sure to pull off the road and park your vehicle in a safe location before attempting to use the controls on the device.
CAUTION
•Do not allow this unit to come into contact with moisture and/or liquids. Electrical shock could result. Also, damage to this unit, smoke, and overheating could result from contact with liquids.
•Always keep the volume low enough to hear outside sounds.
•This product is evaluated in moderate and tropical climate condition under the Audio, video and similar electronic apparatus - Safety requirements, IEC 60065.
After-sales service for Pioneer products
Please contact the dealer, distributor from where you purchased this unit or the authorized PIONEER Service Station for after-sales service or any other information. In case the necessary information is not available, please contact the companies listed below:
Please do not ship your unit to the companies at the addresses listed below for repair without contacting them in advance.
U.S.A. and CANADA
Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.O. Box 1760
Long Beach, CA 90801-1760 800-421-1404
For warranty information please see the Limited Warranty sheet included with this unit.
English
- 5 -
Getting Started
Basic operation
MVH-S600BS
|
|
|
|
|
|
|
DISP (display) |
||||
|
|
|
|
Display window |
|
|
|
USB port |
|||
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
English
|
BAND/ |
|
AUX input jack (3.5 mm stereo jack) |
|
|
|
|||
|
|
|
|
|
M.C. (multi-control) dial |
||||
SRC (source)/OFF |
||||
- 6 -
MVH-S400BT
|
|
DISP (display) |
|
Display window |
USB port |
|
||
|
|
English
|
|
|
|
|
|
|
|
|
|
|
BAND/ |
AUX input jack (3.5 mm stereo jack) |
||
SRC (source)/OFF |
M.C. (multi-control) dial |
|||
Remote Control
|
VOLUME +/– |
/ |
MUTE |
|
SRC (source) 
DISP (display)
Frequently used operations
The available buttons vary depending on the unit.
- 7 -
Purpose |
|
|
Operation |
||
|
|
|
|
|
|
|
|
Head Unit |
|
Remote Control |
|
Turn on the power* |
Press SRC/OFF to turn on |
|
Press SRC to turn on the |
||
|
the power. |
|
|
power. |
|
|
Press and hold SRC/OFF to |
|
Press and hold SRC to turn |
||
|
turn off the power. |
|
off the power. |
||
|
|
|
|
||
Adjust the volume |
Turn the M.C. dial. |
|
Press VOLUME + or –. |
||
|
|
|
|
|
Press MUTE to mute the |
|
|
|
|
|
unit. Press MUTE again or |
|
|
|
|
|
press VOLUME + or – to |
|
|
|
|
|
unmute. |
|
|
|
|
||
Select a source |
Press SRC/OFF repeatedly. |
|
Press SRC repeatedly. |
||
|
|
|
|
||
Change the display |
Press DISP repeatedly. |
|
Press DISP repeatedly. |
||
information |
|
|
|
|
|
|
|
|
|
|
|
Return to the previous |
Press BAND/ |
. |
|
Press / to select the |
|
display/list |
|
|
|
|
next/previous folder. |
|
|
|
|
||
Return to the normal display |
Press and hold BAND/ |
. |
– |
||
from the menu |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
Change the display |
Press and hold BAND/ |
. |
|
||
brightness (not available |
|
|
|
|
– |
when [SIRIUSXM] is selected |
|
|
|
|
|
|
|
|
|
|
|
as a source) |
|
|
|
|
|
|
|
|
|
|
|
Answering a call |
Press |
. |
|
|
Press . |
|
|
|
|
|
|
Ending a call |
Press |
. |
|
|
Press . |
|
|
|
|
|
|
*When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off.
Display indication
The indication varies depending on the unit.
Indication Description
Appears when a lower tier of the menu or folder exists.
Appears when a Bluetooth telephone is connected to this unit by HFP (Hands Free Profile) (page 16) and flashes while the telephone is on hold.
Appears when a Bluetooth audio player is connected to this unit by A2DP (Advanced Audio Distribution Profile) (page 16).
Appears when the 
button is pressed.
Appears when the sound retriever function is set (page 34).
English
- 8 -
Indication |
Description |
BASS |
Appears when [HI]/[LOW] is selected in [D.BASS] (page 38). |
|
|
|
Appears when random/shuffle play is set (except when BT AUDIO is |
|
selected as the source). |
|
|
|
Appears when repeat play is set (except when BT AUDIO is selected as the |
|
source). |
|
|
|
Appears when a Bluetooth connection is made (page 16). |
|
|
Resetting the microprocessor
The microprocessor must be reset in the following situations:
– Before using this unit for the first time after installation
– If the unit fails to operate properly
– When strange or incorrect messages appear on the display
1 Press the RESET button with a pen tip or other pointed instrument.
RESET button
English
Preparing the remote control
Remove the insulation sheet before use.
- 9 -
How to replace the battery
English
Insert the CR2025 (3 V) battery with the plus (+) and minus (–) poles orientated properly.
WARNING
•Do not ingest the battery, Chemical Burn Hazard.
(The remote control supplied with) This product contains a coin/button cell battery. If the coin/ button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
•Do not expose the battery or remote control to excessive heat such as direct sunlight or fire.
CAUTION
•There is a potential danger of explosion if the battery is incorrectly replaced. When replacing the battery, replace it with the same type.
•Do not handle or store the battery with metallic tools or objects.
•If the battery leaks, remove the battery and wipe the remote control completely clean. Then install a new battery.
•When disposing of used batteries, please comply with governmental regulations or environmental public institutions’ rules that apply in your country/area.
•“Perchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate. (Applicable to California, U.S.A.)”
Important
•Do not store the remote control in high temperatures or direct sunlight.
•Do not let the remote control fall onto the floor, where it may become jammed under the brake or accelerator pedal.
Setup menu
When you turn the ignition switch to ON after installation, the setup menu appears in the display.
- 10 -
WARNING
(Only for MVH-S600BS)
Do not use the unit in standard mode when a speaker system for network mode is connected to the unit. Do not use the unit in network mode when a speaker system for standard mode is connected to the unit. This may cause damage to the speakers.
1Turn the M.C. dial to select the options, then press to confirm.
To proceed to the next menu option, you need to confirm your selection.
Menu Item |
Description |
|
LANGUAGE |
Select the language to display the text information from a |
|
[ENG](English), |
compressed audio file. |
|
|
||
[ESP](Spanish), |
|
|
[FRA] (Canadian |
|
|
French) |
|
|
|
|
|
CLOCK SET |
Set the clock. |
|
|
1 Turn the M.C. dial to adjust the hour, then press to confirm. |
|
|
The indicator moves to the minute setting automatically. |
|
|
2 Turn the M.C. dial to adjust the minute, then press to confirm. |
|
|
|
|
SPEAKER MODE (Only |
Switch between two operation modes: the 2-way network mode |
|
for MVH-S600BS) |
(NETWORK) and the standard mode (STANDARD) according to |
|
[STANDARD], |
the connections you have established. For details on operation |
|
modes, see page 32. |
||
[NETWORK] |
||
After selecting the appropriate mode, turn the M.C. dial to |
||
|
||
|
select [YES], then press to confirm. |
|
|
• You cannot complete the setup menu without setting the |
|
|
[SPEAKER MODE]. |
|
|
• Once the speaker mode is set, this setting cannot be changed |
|
|
unless the default settings of this product are restored. Restore |
|
|
the default settings to change the speaker mode setting (refer |
|
|
to SYSTEM RESET on page 13). |
|
|
• When [NETWORK] is selected, the beep tone function is not |
|
|
available. |
|
|
|
2[QUIT :YES] appears when all the settings have been made.
To return to the first item of the setup menu, turn the M.C. dial to select [QUIT :NO], then press to confirm.
3 Press the M.C. dial to confirm the settings.
NOTE
These settings other than [SPEAKER MODE] can be made at any time from the SYSTEM settings (page 38).
English
- 11 -
Canceling the demonstration display (DEMO OFF)
1 Press the M.C. dial to display the main menu.
2 Turn the M.C. dial to select [SYSTEM], then press to confirm.
3 Turn the M.C. dial to select [DEMO OFF], then press to confirm.
4 Turn the M.C. dial to select [YES], then press to confirm.
INITIAL settings
1 Press and hold SRC/OFF until the unit turns off.
2 Press the M.C. dial to display the main menu.
3 Turn the M.C. dial to select [INITIAL], then press to confirm.
4 Turn the M.C. dial to select an option, then press to confirm.
NOTE
The options vary depending on the unit.
Menu Item |
Description |
|
REAR-SP |
Select when there is a full-range speaker connected to the rear |
|
|
[FUL] |
speaker output leads. |
|
|
|
|
|
|
|
[SW] |
Select when there is a subwoofer connected directly to the rear |
|
|
speaker output leads without any auxiliary amplifier. |
|
|
|
SP-P/O MODE |
Select when there is a full-range speaker connected to the rear |
|
|
[REAR/SUB.W] |
speaker output leads and there is a subwoofer connected to the |
|
RCA output. |
|
|
|
|
|
|
|
|
[SUB.W/SUB.W] |
Select when there is a passive subwoofer connected directly to |
|
|
the rear speaker output leads and there is a subwoofer |
|
|
connected to the RCA output. |
|
|
|
|
[REAR/REAR] |
Select when there are full-range speakers connected to the rear |
|
|
speaker output leads and RCA output. If there is a full-range |
|
|
speaker connected to the rear speaker output leads, and the |
|
|
RCA output is not used, you may select either [REAR/SUB.W] or |
|
|
[REAR/REAR]. |
|
|
|
SYSTEM UPDATE |
Select [SYSTEM INFO] to confirm the latest system information |
|
|
[SYSTEM INFO], [S/ |
on the unit. |
|
W UPDATE] |
Select [S/W UPDATE] to update the unit to the latest software |
|
and initialize the unit settings. For details on the latest software |
|
|
|
|
|
|
and updating, visit our website. |
|
|
|
English
- 12 -
Menu Item |
Description |
SXM RESET |
Select to initialize the SiriusXM settings. |
[YES], [NO] |
|
|
|
SYSTEM RESET |
Select [YES] to initialize the unit settings. The unit will be |
[YES], [NO] |
restarted automatically. |
|
|
|
|
Radio
The tuner frequencies on this unit are allocated for use in North America. Use in other areas may result in poor reception.
Receiving preset stations
1 Press SRC/OFF to select [RADIO].
2 Press BAND/ 
to select the band from [FM1], [FM2], [FM3] or [AM].
3 Press a number button (1/ 
to 6/ 
).
NOTE
You can select a preset channel by pressing 
and turning the M.C. dial.
TIP
The 
/ 
buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the FUNCTION settings (page 34).
Best stations memory (BSM)
The six strongest stations are stored on the number buttons (1/ 
to 6/ 
).
1 After selecting the band, press the M.C. dial to display the main menu.
2 Turn the M.C. dial to select [FUNCTION], then press to confirm.
3 Turn the M.C. dial to select [BSM], then press to confirm.
To seek a station manually
1After selecting the band, press 
/ 
to select a station.
Press and hold 
/ 
then release to seek an available station. Scanning stops when the unit receives a station. To cancel seek tuning, press 
/ 
.
English
- 13 -
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 34).
To store stations manually
1While receiving the station you want to store, press and hold one of the number buttons (1/ 
to 6/ 
) until it stops flashing.
NOTE
You can select a preset channel by pressing 
and turning the M.C. dial. After selecting a channel, press and hold the M.C. dial to store a station.
USB/iPhone/AUX
Playing back
Disconnect headphones from the device before connecting it to the unit.
USB devices (including Android™)/iPhone
1 Open the USB port cover.
2 Plug in the USB device/iPhone using an appropriate cable.
NOTE
To automatically switch to [USB] source when a USB device/iPhone is connected to the unit, set [USB AUTO] to [ON] in the SYSTEM settings (page 40).
CAUTION
Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device connected directly to the unit will protrude out from the unit, which could be dangerous.
Before removing the device, stop playback.
AOA connections
For details on AOA connection, see page 30.
MTP connection
A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using the cable supplied with the device. However, depending on the connected device and the numbers of the files in the device, audio files/songs may not be able to be played back via MTP. Note that MTP connection is not compatible with WAV file formats and FLAC file formats, and cannot be used with the MIXTRAX function.
English
- 14 -
NOTE
If you use an MTP connection, [PHONE CONNECT] needs to be set to [USB MTP] in the SYSTEM settings (page 40).
AUX
1 Insert the stereo mini plug into the AUX input jack.
2 Press SRC/OFF to select [AUX] as the source.
NOTE
If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source (page 39).
Operations
You can make various adjustments in the FUNCTION settings (page 33).
Note that the following operations do not work for an AUX device. To operate an AUX device, use the device itself.
Purpose |
Operation |
|
|
|
Select a folder*1 |
Press 1/ |
or 2/ . |
|
|
|
|
|
|
|
Select a track/song (chapter) |
Press |
or |
. |
|
|
|
|
|
|
Fast forward or reverse*2 |
Press and hold |
or |
. |
|
|
|
|
||
Search for a file from a list (USB only) |
1 Press |
to display the list. |
||
|
2 Turn the M.C. dial to select the desired |
|||
|
file (folder) name or category, then press |
|||
|
to confirm. |
|
|
|
|
3 Turn the M.C. dial to select the desired |
|||
|
file, then press to confirm. |
|
||
|
Playback starts. |
|
|
|
|
|
|||
View a list of the files in the selected folder/ |
Press the M.C. dial when a folder/category |
|||
category*1 |
is selected. |
|
|
|
|
|
|||
Play a song in the selected folder/ |
Press and hold the M.C. dial when a folder/ |
|||
category*1 |
category is selected. |
|
||
|
|
|
|
|
Repeat play |
Press 6/ |
. |
|
|
|
|
|
|
|
Random/shuffle play |
Press 5/ |
. |
|
|
|
|
|
|
|
Pause/resume playback |
Press 4/PAUSE. |
|
|
|
|
|
|
||
Return to root folder (USB only)*1 |
Press and hold 1/ . |
|
||
|
|
|
|
|
*1 Compressed audio files only
*2 When you use the fast forward or reverse function while playing a VBR file, the playback time may be not correct.
English
- 15 -
About MIXTRAX (USB/iPhone only)
The MIXTRAX function creates a non-stop mix of your music library, accompanied by illumination effects. For details on MIXTRAX settings, see page 43.
NOTES
• iPhone needs to be connected with Pioneer ARC APP via USB for using this function (page 30).
•This function is not compatible with an Android device connected via MTP.
•Depending on the file/song, sound effects may not be available.
•Turn the MIXTRAX function off if the illumination effects it produces interfere with driving.
1 Press 3/MIX to turn MIXTRAX on/off.
Bluetooth
Bluetooth connection
Important
If ten or more Bluetooth devices (e.g. a phone and separate audio player) are connected, they may not work properly.
1Turn on the Bluetooth function of the device.
If you make a Bluetooth connection from the device, proceed to step 6.
2 Press 
to display the phone menu.
3 Turn the M.C. dial to select [BT SETTING], then press to confirm.
4Turn the M.C. dial to select [ADD DEVICE], then press to confirm.
The unit starts to search for available devices, then displays them in the device list.
•To cancel searching, press the M.C. dial.
•If the desired device is not in the list, select [RE-SEARCH].
•If there is no device available, [NOT FOUND] appears in the display.
5Turn the M.C. dial to select a device from the device list, then press to confirm.
Press and hold the M.C. dial to switch the displayed device information between the Bluetooth device address and device name.
If you make a Bluetooth connection from the unit, proceed to step 7.
6 Select [Pioneer BT Unit] shown in the device display.
7Make sure the same 6-digit number appears on this unit and the device, then select “Yes” on the device.
-16 -
English
NOTES
•[DEVICE FULL] appears if the unit has already been paired with ten other devices. In this case, delete one of the paired devices. See [DEL DEVICE] in the Bluetooth settings (page 17).
•Depending on the device, the PIN code is required in step 7. In this case, input [0000].
TIP
The Bluetooth connection can be also made by detecting the unit from the Bluetooth device. To do so, [VISIBLE] in the Bluetooth settings needs to be set to [ON]. For details on Bluetooth device operations, refer to the operating instructions supplied with the Bluetooth device.
Bluetooth settings
Menu Item |
Description |
DEVICELIST |
Display the list of paired Bluetooth devices. “*” appears on the |
|
device name when the Bluetooth connection is established. |
|
When no device is selected in the device list, this function is not |
|
available. |
|
|
DEL DEVICE |
Delete the device information. |
[DELETE YES], |
|
[DELETE NO] |
|
|
|
ADD DEVICE |
Register a new device. |
|
If ten devices are already paired, this function is not available. |
|
You can check the number of paired devices on the [DEVICELIST] |
|
setting. |
|
|
A.CONN |
Select [ON] to connect to a Bluetooth device automatically. |
[ON], [OFF] |
|
|
|
VISIBLE |
Select [ON] so that a Bluetooth device can detect the unit when |
[ON], [OFF] |
the unit is connected via Bluetooth to another device. |
|
|
|
|
PIN CODE |
Change the PIN code. |
|
1 Press the M.C. dial to display the setting mode. |
|
2 Turn the M.C. dial to select a number. |
|
3 Press the M.C. dial to move the cursor to the next position. |
|
4 After inputting the PIN code, press and hold the M.C. dial. |
|
After inputting the PIN code, pressing the M.C. dial returns you |
|
to the PIN code input display, and you can change the PIN code. |
|
|
DEV. INFO |
Switch the device information on the display between the |
|
device name and Bluetooth device address. |
|
|
English
- 17 -
Menu Item |
Description |
|
A.PAIRING |
Select [ON] to pair the unit and iPhone or Android device |
|
[ON], [OFF] |
automatically when an iPhone or Android device is connected |
|
to the unit via USB. (This function may not be available |
||
|
||
|
depending on the version of iOS you are using.) |
|
|
• When you are using an Android device, this function is |
|
|
available in the following situations: |
|
|
– Your device has Android OS 4.4 or later installed. |
|
|
– Be sure to turn on the Bluetooth function of the device and confirm |
|
|
that the device is not connected to the unit via Bluetooth. |
|
|
– [P.APP AUTO ON] needs to be set to [ON] (page 40). |
|
|
– Pioneer ARC APP needs to be installed on your Android device and |
|
|
[PHONE CONNECT] needs to be set to [APP CONTROL] (page 30). |
|
|
– A confirmation button should be pressed on the caution window |
|
|
displayed on Pioneer ARC APP after a connection with the Pioneer |
|
|
ARC APP is made. |
|
|
|
Bluetooth telephone
First, make a Bluetooth connection with the Bluetooth telephone (page 16). Up to two Bluetooth telephones can be connected simultaneously.
Important
•Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running can drain the vehicle’s battery.
•Be sure to park your vehicle in a safe place and apply the parking brake before operation.
To make a phone call
1Press 
to display the phone menu.
When two phones are connected, a phone name appears first then a phone menu will display. To switch to another phone, press 
again.
2Turn the M.C. dial to select [RECENTS] or [PHONE BOOK], then press to confirm.
If you select [PHONE BOOK], proceed to step 4.
3Turn the M.C. dial to select [MISSED], [DIALED] or [RECEIVED], then press to confirm.
4Turn the M.C. dial to select a name or phone number, then press to confirm.
The phone call starts.
To answer an incoming call
1 Press 
when a call is received.
English
- 18 -
TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call while one phone is being used for a call, a message will appear in the display. To answer that incoming call, you need to end the existing call.
Basic operations
Purpose |
Operation |
|
|
End a call |
Press |
. |
|
|
|
|
|
Reject an incoming call |
Press and hold |
when a call is received. |
|
|
|
||
Switch between the current caller |
Press the M.C. dial. |
||
and a caller on hold |
|
|
|
|
|
|
|
Cancel a caller on hold |
Press and hold |
. |
|
|
|
||
Adjust the volume of the caller’s |
Turn the M.C. dial during the call. |
||
voice (When private mode is on, |
|
|
|
this function is not available.) |
|
|
|
|
|
|
|
Turn the private mode on or off |
Press BAND/ |
during the call. |
|
|
|
|
|
To preset phone numbers
1 Select a phone number from a phone book or call history.
2Press and hold one of the number buttons (1/ 
to 6/ 
).
The contact is stored in the selected preset number.
To make a call using a preset number, press one of the number buttons (1/ 
to 6/ 
), then press the M.C. dial.
Voice recognition (Only for iPhone)
This function is only available when an iPhone equipped with voice recognition is connected to the unit via Bluetooth.
1 |
Press and hold |
to activate the voice recognition mode. |
2 |
Press the M.C. dial and then talk into the microphone to input voice commands. |
|
To exit the voice recognition mode, press BAND/ 
.
NOTE
For details on the voice recognition features, refer to the manual supplied with your iPhone.
English
- 19 -
Phone menu
Menu Item |
Description |
||
RECENTS |
Display the missed call history. |
||
|
[MISSED] |
|
|
|
|
|
|
|
[DIALED] |
Display the dialed call history. |
|
|
|
|
|
|
[RECEIVED] |
Display the received call history. |
|
|
|
||
PHONE BOOK |
Display the contacts in your phone. Set [VISIBLE] in the |
||
|
|
Bluetooth settings to [ON] to browse the contacts via this unit. |
|
|
|
||
PRESET 1-6 |
Recall the preset phone numbers. You can also recall the preset |
||
|
|
phone numbers by pressing one of the number buttons (1/ |
|
|
|
to 6/ |
). |
|
|
||
A.ANSR* |
Select [ON] to answer an incoming call automatically. |
||
|
[ON], [OFF] |
|
|
|
|
||
R.TONE |
Select [ON] if the ring tone does not come out from the car |
||
|
[ON], [OFF] |
speakers. Depending on the connected phone, this function |
|
|
may not work. |
||
|
|
||
|
|
||
PB INVT |
Invert the order of names in the phone book (name view). |
||
|
|
||
BT SETTING |
You can adjust various settings for Bluetooth connections. For |
||
|
|
details on Bluetooth settings, see page 17. |
|
|
|
|
|
*If two phones are connected, this function does not work on incoming calls that are received while one of the phones is being used for a call.
Bluetooth audio
Important
•Depending on the Bluetooth audio player connected to this unit, the available operations will be limited to the following two levels:
–A2DP (Advanced Audio Distribution Profile) can only play back songs on your audio player.
–AVRCP (Audio/Video Remote Control Profile) can perform functions such as playback, pause, select song, etc.
•The sound of the Bluetooth audio player will be muted when the phone is in use.
•When the Bluetooth audio player is in use, you cannot connect to a Bluetooth telephone automatically.
•Depending on the type of Bluetooth audio player you have connected to this unit, operation and information displayed may vary based on availability and functionality.
1 Make a Bluetooth connection with the Bluetooth audio player.
2 Press SRC/OFF to select [BT AUDIO] as the source.
3 Press BAND/ 
to start playback.
English
- 20 -
Basic operations
You can make various adjustments in the FUNCTION settings (page 33).
Purpose |
Operation |
|
|
|
Fast forward or reverse |
Press and hold |
or |
. |
|
|
|
|
|
|
Select a track |
Press |
or |
. |
|
|
|
|
|
|
Repeat play* |
Press 6/ |
. |
|
|
|
|
|
|
|
Random play* |
Press 5/ |
. |
|
|
|
|
|
|
|
Pause/resume playback |
Press 4/PAUSE. |
|
|
|
|
|
|
|
|
Search for a file from a list |
1 Press |
to display a list. |
|
|
|
2 Turn the M.C. dial to select the desired |
|||
|
folder name, then press to confirm. |
|||
|
3 Turn the M.C. dial to select the desired |
|||
|
file, then press to confirm. |
|
||
|
Playback starts. |
|
|
|
|
|
|
|
|
Switch the Bluetooth device name in the |
Press 1/ |
or 2/ . |
|
|
device list according to the connection |
|
|
|
|
order |
|
|
|
|
|
|
|
|
|
* Depending on the connected device, these operations may not be available.
App Mode
You can enjoy listening to an application on an iPhone/Android device via the unit. In some cases, you can control an application by using the unit.
For details on compatible devices, visit our website.
Important
Use of third party apps may involve or require the provision of personally identifiable information, whether through the creation of a user account or otherwise, and for certain applications, the provision of geolocation data.
ALL THIRD PARTY APPS ARE THE SOLE RESPONSIBILITY OF THE PROVIDERS, INCLUDING WITHOUT LIMITATION COLLECTION AND SECURITY OF USER DATA AND PRIVACY PRACTICES. BY ACCESSING THIRD PARTY APPS, YOU AGREE TO REVIEW THE TERMS OF SERVICE AND PRIVACY POLICIES OF THE PROVIDERS. IF YOU DO NOT AGREE WITH THE TERMS OR POLICIES OF ANY PROVIDER OR DO NOT CONSENT TO THE USE OF GEOLOCATION DATA WHERE APPLICABLE, DO NOT USE THAT THIRD PARTY APP.
For iPhone users
This function is compatible with iPhones installed with iOS 6.0 or later.
For Android device users
This function is compatible with devices that have Android OS 2.3 or later installed.
English
- 21 -
NOTE
PIONEER IS NOT LIABLE FOR ANY THIRD PARTY APPS OR CONTENT, INCLUDING WITHOUT LIMITATION THEIR ACCURACY OR COMPLETENESS. THE CONTENT AND FUNCTIONALITY OF SUCH APPS ARE THE SOLE RESPONSIBILITY OF THE APP PROVIDER.
Playback of an application via the unit
1Connect this unit with the mobile device.
•iPhone via USB (page 14)
•iPhone/Android device via Bluetooth (page 16)
2 Press the M.C. dial to display the main menu.
3 Turn the M.C. dial to select [SYSTEM], then press to confirm.
4 Turn the M.C. dial to select [PHONE CONNECT], then press to confirm.
5Turn the M.C. dial to select one of the below, then press to confirm.
•Select [IPHONE] for iPhone.
•Select [ANDROID] for Android device.
6Turn the M.C. dial to select one of the below.
•Select [WIRED] for the USB connection.
•Select [BLUETOOTH] for the Bluetooth connection.
NOTE
When the connection setting is changed, a message that lets you know that the connection setting had been changed will appear in the display. Press the M.C. dial and turn the M.C. dial to select [SRC OFF :YES], then press to confirm. The unit turns off automatically and the setting is executed.
7 Press SRC/OFF to select [APP].
8 Operate the mobile device to start up the application.
NOTE
When you connect a mobile device other than iPhone/Android device, select [OTHERS] in the [PHONE CONNECT] menu and select [WIRED] (for the USB connection) or [BLUETOOTH] (for the Bluetooth connection). Depending on your mobile device, it may not operate correctly.
Basic operations
You can make various adjustments in the FUNCTION settings (page 33).
Purpose |
Operation |
|
|
|
Select a track |
Press |
or |
. |
|
|
|
|
|
|
Fast forward or reverse |
Press and hold |
or |
. |
|
|
|
|
|
|
Pause/resume playback |
Press BAND/ |
. |
|
|
|
|
|
|
|
English
- 22 -
Pandora®
Pandora internet radio is a music service not affiliated with Pioneer. More information is available at http://www.pandora.com.
The Pandora mobile application is available for iPhone and Android phones. Please visit www.pandora.com/everywhere/mobile for the latest compatibility information.
Listening to Pandora
Update the firmware of the Pandora application to the latest version before use.
1Connect this unit with the mobile device.
•iPhone via USB (page 14)
•iPhone/Android device via Bluetooth (page 16)
If you choose a USB connection, proceed to step 6.
2 Press SRC/OFF to select [PANDORA].
3 Press and hold 1/ 
to display [PHONE CONNECT].
4Turn the M.C. dial to select one of the below, then press to confirm.
•Select [IPHONE] for iPhone.
•Select [ANDROID] for Android device.
5Turn the M.C. dial to select [BLUETOOTH] for iPhone/Android device via Bluetooth.
NOTE
When the connection setting is changed, a message that lets you know that the connection setting had been changed will appear in the display. Press the M.C. dial and turn the M.C. dial to select [SRC OFF :YES], then press to confirm. The unit turns off automatically and the setting is executed.
6 Press SRC/OFF to select [PANDORA].
7 Launch the Pandora application on the mobile device and start playback.
NOTE
When you connect a mobile device other than iPhone/Android device, select [OTHERS] in the [PHONE CONNECT] menu and select [WIRED] (for the USB connection) or [BLUETOOTH] (for the Bluetooth connection). Depending on your mobile device, it may not operate correctly.
Basic operations
You can make various adjustments in the FUNCTION settings (page 33).
English
- 23 -
Purpose |
Operation |
|
|
|
Skip a track |
Press |
. |
|
|
|
|
|
||
Switch between Shuffle and the |
Press |
(list), then turn the M.C. dial to select the |
||
station |
Shuffle or the desired station. |
|||
|
|
|
||
Change the sort order |
Press |
(list), then select one of the following. |
||
|
[ABC]: Sort the items in the list alphabetically. |
|||
|
[DATE]: Sort the items in the list in order of the |
|||
|
dates on which the items were created. |
|||
|
|
|||
Play |
When Shuffle or the station is selected, press the |
|||
|
M.C. dial. |
|
|
|
|
|
|||
Delete a station |
1 When the station is selected, press and hold the |
|||
|
M.C. dial. |
|
|
|
|
[DELETE YES] appears. |
|
||
|
2 Press the M.C. dial. |
|
||
|
To cancel, press BAND/ |
in step 1. |
||
|
|
|
|
|
Pause/resume playback |
Press 4/PAUSE. |
|
|
|
|
|
|
|
|
Thumbs Up |
Press 1/ . |
|
|
|
|
|
|
|
|
Thumbs Down |
Press 2/ . |
|
|
|
|
|
|
|
|
Create a new station based on the |
Press and hold 5/ |
. |
|
|
track currently being played |
|
|
|
|
|
|
|
|
|
Create a new station based on the |
Press and hold 6/ |
. |
|
|
artist currently being played |
|
|
|
|
|
|
|
||
Store the track information currently |
1 Press and hold 3/MIX. |
|
||
being played in your Pandora |
[BOOKMARK] appears. |
|
||
account. |
2 Press the M.C. dial. |
|
||
|
|
|
|
|
NOTE
Some functions of Pandora may not be operated from the unit.
Spotify®
Spotify is a music streaming distribution service not affiliated with Pioneer. More information is available at http://www.spotify.com.
The Spotify application is available for compatible smartphones, please visit https:// support.spotify.com/ for the latest compatibility information.
To enjoy Spotify as you drive, first download the Spotify app to your iPhone or Android device. You can download it on the iTunes App Store or Google Play™. Choose a free account or a paid Premium account, either in the app or at spotify.com. A Premium account gives you more features, like offline listening.
English
- 24 -
Important
•This product incorporates Spotify software which is subject to 3rd party licenses found here: www.spotify.com/connect/third-party-licenses.
•For information on the countries and regions where Spotify can be used, take a look at https:// www.spotify.com/us/select-your-country/.
Listening to Spotify
Update the firmware of the Spotify application to the latest version before use.
1Connect this unit with the mobile device.
•iPhone via USB (page 14)
•iPhone/Android device via Bluetooth (page 16)
If you choose a USB connection, proceed to step 6.
2 Press SRC/OFF to select [SPOTIFY].
3 Press and hold 1/ 
to display [PHONE CONNECT].
4Turn the M.C. dial to select one of the below, then press to confirm.
•Select [IPHONE] for iPhone.
•Select [ANDROID] for Android device.
5Turn the M.C. dial to select [BLUETOOTH] for iPhone/Android device via Bluetooth.
NOTE
When the connection setting is changed, a message that lets you know that the connection setting had been changed will appear in the display. Press the M.C. dial and turn the M.C. dial to select [SRC OFF :YES], then press to confirm. The unit turns off automatically and the setting is executed.
6 Press SRC/OFF to select [SPOTIFY].
7 Launch the Spotify application on the mobile device and start playback.
NOTE
When you connect a mobile device other than iPhone/Android device, select [OTHERS] in the [PHONE CONNECT] menu and select [WIRED] (for the USB connection) or [BLUETOOTH] (for the Bluetooth connection). Depending on your mobile device, it may not operate correctly.
Basic operations
You can make various adjustments in the FUNCTION settings (page 33).
NOTE
The available operations may vary according to the type of contents (track/album/artist/playlist/radio) you want to play.
English
- 25 -
Purpose |
Operation |
|
|
|
|
Skip a track |
Press |
or |
. |
|
|
|
|
|
|
||
Search for a track from a list |
1 |
Press |
(list) to display the list. |
||
|
2 |
Turn the M.C. dial to select the desired |
|||
|
|
category, then press to confirm. |
|||
|
3 |
Turn the M.C. dial to select the desired |
|||
|
|
file, then press to confirm. |
|||
|
|
Playback starts. |
|
|
|
|
|
|
|
||
Pause/resume playback |
Press 4/PAUSE. |
|
|
||
|
|
|
|
||
Thumbs Up (Only for radio) |
Press 1/ . |
|
|
||
|
|
|
|
||
Thumbs Down (Only for radio) |
Press 2/ . |
|
|
||
|
|
|
|
|
|
Random play (Only for track/album/artist/ |
Press 5/ |
. |
|
|
|
playlist) |
|
|
|
|
|
|
|
|
|
|
|
Repeat play (Only for track/album/artist/ |
Press 6/ |
. |
|
|
|
playlist) |
|
|
|
|
|
|
|
|
|
||
Start a radio channel based on the song |
1 |
Press and hold 5/ |
to start a radio. |
||
currently being played. |
2 |
Press the M.C. dial. |
|
||
|
• This function may not be available |
||||
|
|
depending on the selected song. |
|||
|
|
|
|
|
|
NOTE
Some functions of Spotify may not be operated from the unit.
SiriusXM Satellite Radio
(Only for MVH-S600BS)
Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit www.siriusxm.com
Replay™
You can pause, rewind or replay live satellite radio as well as the channel you are currently listening to.
TuneStart™
Automatically start songs from the beginning when you tune to one of your preset music channels stored on the current band of presets. For details, refer to TUNE START on page 35.
English
- 26 -
NOTE
TuneStart is compatible with SXV200 or later tuner models. Not compatible with SXV100.
TuneScan™
Scan through short previews of songs you may have missed on music channels stored on the current band of presets.
Each song in the current channel plays for six seconds at a time. For details, refer to TUNE SCAN (scanning the songs) on page 35.
NOTE
TuneScan is compatible with SXV200 or later tuner models. Not compatible with SXV100.
TuneMix™
Create a music channel that’s a blend of songs made up from the music channels stored on the current band of presets. For details, refer to TUNEMIX on page 35.
NOTE
TuneMix™ is compatible with the SXV300 or later tuner models. Not compatible with the SXV200 or SXV100.
Preparing for the SiriusXM Satellite Radio service
1 Press SRC/OFF to select [SIRIUSXM].
2Press 
/ 
to select Channel 0.
The Radio ID appears on the display.
In addition, the Radio ID is located on the bottom of the SiriusXM Connect Vehicle Tuner.
NOTE
The Radio ID does not include the letters I, O, S or F.
3Activate the SiriusXM service online or by phone.
For US Subscriptions:
•Visit www.siriusxm.com/activatenow
•Call SiriusXM Listener Care at 1-866-635-2349 For Canadian Subscriptions:
•Visit www.siriusxm.ca/activatexm
•Call 1-877-438-9677
4[SUBSCRIPTION UPDATED] appears on the display when your SiriusXM Connect Vehicle Tuner has been subscribed successfully.
Press any key to clear the activation message.
NOTE
The activation process usually takes 10 minutes to 15 minutes but may take up to an hour in some cases. Do not turn off the unit until you clear the activation message in step 4.
English
- 27 -
Listening to a channel
1Press and hold DISP, then select [CHANNEL].
You can also select the operation mode by the SiriusXM settings (page 34).
2 Press SRC/OFF to select [SIRIUSXM].
3 Press BAND/ 
to select a band from [SXM1], [SXM2] or [SXM3].
4Press 
/ 
to select a channel.
Pressing and holding either button will rapidly browse through the channels. Press and hold either button then release to tune automatically. Scanning stops when the unit receives a channel. To cancel seek tuning, press 
/ 
.
Basic operations
1 Press and hold DISP to select the operation mode [CHANNEL] or [REPLAY].
NOTE
You can exit the replay mode by pressing and holding BAND/ 
.
Purpose |
Operation |
|
|
|
|
Select a channel |
1 |
Set the operation mode to [CHANNEL]. |
|||
|
2 |
Press |
or |
. |
|
|
Pressing and holding either button will |
||||
|
rapidly browse through the channels. |
||||
|
|
|
|||
Skip backward/forward |
1 |
Set the operation mode to [REPLAY]. |
|||
|
2 |
Press |
or |
. |
|
|
|
|
|||
Fast forward or reverse |
1 |
Set the operation mode to [REPLAY]. |
|||
|
2 |
Press and hold |
or |
. |
|
|
|
|
|
|
|
NOTE
You can also make various adjustments in the SiriusXM settings (page 34).
Category scan
The live broadcast for each channel in the current category plays for six seconds at a time. Follow the instructions below.
To search for a channel from a list
1 |
Press |
during playback. |
2 |
Turn the M.C. dial to select a category. |
|
3Select one of the operations below.
Category scan: Press and hold the M.C. dial to switch to category scan.
-28 -
English
Channel search: Press the M.C. dial to stop a scan.
NOTE
Press DISP to change the display information between “Channel Name”, “Artist Name”, “Song Title”, “Content Info” and “Channel Number”.
Scan options
Purpose |
Operation |
|
|
Stopping a scan (selecting the channel or |
Press the M.C. dial. |
||
song playing) |
|
|
|
|
|
|
|
Switching to the next/previous song during |
Press |
or |
. |
TuneScan |
|
|
|
|
|
|
|
Switching to the next/previous channel |
Press |
or |
. |
during the category scan |
|
|
|
|
|
|
|
Aborting a scan (The last channel or song |
Press BAND/ |
. |
|
will continue to play when scan ends.) |
|
|
|
|
|
|
|
Channel Preset
To preset a channel
1While receiving a channel you want to store, press and hold one of the number buttons (1/ 
to 6/ 
) until it stops flashing.
To play the stored channels, select the band and then press a number button (1/ 
to 6/ 
).
To preset a channel from the program list
1 |
While receiving a channel you want to store, press . |
2 |
Turn the M.C. dial to select [PRESETS], then press to confirm. |
3 |
Turn the M.C. dial to select a preset channel. |
4 |
Press and hold the M.C. dial to store. |
To play the stored channels, turn the M.C. dial to select a preset channel, then press to confirm.
Parental Control
Some SiriusXM channels contain mature content. You can lock these channels. For details, see [PARENTAL CTRL] in SiriusXM settings (page 36).
English
- 29 -
Using Pioneer ARC APP
You can operate the unit from Pioneer ARC APP installed on an iPhone/Android device. In some cases, you can control aspects of the application, such as source selection, pause, etc., by using the unit.
For details on what operations are available on the application, see the application’s help section.
WARNING
Do not attempt to operate the application while driving. Make sure to pull off the road and park your vehicle in a safe location before attempting to use the controls on the application.
For iPhone users
This function is compatible with iPhones (iPhone 5 or later) installed with iOS 8.0 or later. You can download Pioneer ARC APP on iTunes App Store.
For Android device users
This function is compatible with devices that have Android OS 4.1 or later installed and also support AOA (Android Open Accessory) 2.0.
You can download Pioneer ARC APP on Google Play.
NOTE
Some Android devices connected via AOA 2.0 may not work properly or emit sounds due to their own software design, regardless of the OS version.
Making a connection with Pioneer ARC APP
1Connect this unit with the mobile device.
•iPhone/Android device via USB (page 14)
•iPhone/Android device via Bluetooth (page 16)
2 Press the M.C. dial to display the main menu.
3 Turn the M.C. dial to select [SYSTEM], then press to confirm.
4 Turn the M.C. dial to select [PHONE CONNECT], then press to confirm.
5 Turn the M.C. dial to select one of the below, then press to confirm.
• Select [IPHONE] for iPhone.
• Select [ANDROID] for Android device.
NOTE
When the connection setting is changed, a message that lets you know that the connection setting had been changed will appear in the display. Press the M.C. dial and turn the M.C. dial to select [SRC OFF :YES], then press to confirm. The unit turns off automatically and the setting is executed.
English
- 30 -
Loading...