Size:
979.72 Kb
Download

Multi-CD control High power cassette player with RDS tuner

Operation Manual

KEH-P2830R KEH-P2800R

&RQWHQWV

Installation ............................................

3

Installation with the rubber bush ........................

3

Removing the Unit ..............................................

3

Connection Diagram ............................

4

Connecting the Units ...........................

6

Key Finder ............................................

7

Before Using This Product ..................

8

About This Product .............................................

8

About This Manual .............................................

8

Precaution ...........................................................

8

In Case of Trouble ..............................................

8

Detaching and Replacing the

 

Front Panel ...........................................

9

Theft Protection ..................................................

9

Initial Setting Menu ............................

10

Entering the Initial Setting Menu .....................

10

Changing the FM Tuning Step .........................

10

Switching the Auto PI Seek ..............................

11

Basic Operation .................................

12

Switching Power On .........................................

12

Switching Power Off ........................................

12

Tuner Operation .................................

13

Basic Operation of Tuner .................................

13

AF Function Switching .....................................

14

Entering the Function Menu .............................

15

Local Seek Tuning ............................................

16

Preset Tuning ....................................................

16

BSM (Best Stations Memory) ..........................

17

Preset Memory ..................................................

17

Recalling Preset Stations ..................................

18

Using the Programmable Button ......................

18

Using RDS Functions ........................

20

What is RDS? ...................................................

20

Program Service Name Display .......................

20

AF Function .....................................................

21

PI Seek Function ..............................................

22

REG Function ...................................................

22

TA Function .....................................................

23

PTY Function ...................................................

25

Using the Cassette Player .................

28

Basic Operation of Cassette Player ..................

28

Fast Forward/Rewind .......................................

29

Entering the Function Menu .............................

29

Radio Intercept .................................................

30

Cassette Player and Care ..................

31

Precaution .........................................................

31

Cleaning the Head ...........................................

31

Audio Adjustment ..............................

32

Selecting the Mode ...........................................

32

Balance Adjustment .........................................

32

Bass/Treble Adjustment ...................................

33

Loudness Adjustment .......................................

33

Other Functions .................................

34

Time Display/Setting .......................................

34

Specifications ....................................

35

,QVWDOODWLRQ

1RWH

Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up properly, and the unit and the system work properly.

Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.

Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop.

If installation angle exceeds 30° from horizontal, the unit might not give its optimum performance.

30˚

Installation with the rubber bush

1

2

 

 

182

53

3

 

4

1.Dashboard

2.Holder

After inserting the holder into the dashboard, then select the appropriate tabs according to the thickness of the dashboard material and bend them.

(Install as firmly as possible using the top and the bottom tabs. To secure, bend the tabs 90 degrees.)

3.Rubber bush

4.Screw

Removing the Unit

5

 

 

 

 

 

 

5. Insert the supplied extraction keys into the

 

 

 

 

 

 

unit, as shown in the figure, until they click

 

 

 

 

 

 

 

 

 

 

 

 

 

 

into place. Keeping the keys pressed against

 

 

 

 

 

 

 

the sides of the unit, pull the unit out.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

&RQQHFWLRQ 'LDJUDP

This product conforms to new cord colors.

 

 

1

A

 

 

2

 

 

 

3

15

 

 

4

 

 

 

 

B

 

7

6

 

 

 

 

9

 

8

 

11

 

10

 

5

 

 

 

 

 

7

 

9

 

8

 

11

 

10

 

 

 

12

 

13

 

 

 

 

 

14

 

1.This unit

2.Rear output

3.Anntenna jack

4.Multi-CD player (sold separately)

5.Connect leads of the same color to each other.

6.1RWH

Depending on the kind of vehicle, the function of 9 and 11 may be different. If this is the case, be sure to connect 8 to 11 and 9 to 10.

When the power cord of a component such as a Multi-CD Player is connected to this unit's power cord, check that 9 and 11 (Back-up or Accessory) are operating correctly, and that connections are correct.

7.Cap

8.Yellow

To terminal always supplied with power regardless of ignition switch position.

9.Yellow

Back-up (or accessory)

10.Red

To electric terminal controlled by ignition switch (12 V DC) ON/OFF.

11.Red

Accessory (or Back-up)

12.Black (ground)

To vehicle (metal) body.

13.ISO connector

1RWH

In some vehicles, the ISO connector may be divided into two. If this is the case, be sure to connect to both connectors.

16

A

19

 

 

18

B

17

20

 

 

 

21

22

23

23

24

CAUTION

Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied Installation manuals of both products and

14.Speaker leads White: Front left

White/black: Front left Gray: Front right Gray/black: Front right Green: Rear left Green/black: Rear left Violet: Rear right Violet/black: Rear right

15.Fuse

16.Connecting cords with RCA pin plugs (sold separately).

17.Blue/white

18.System remote control

19.To system control terminal of the power amp or Auto-antenna relay control terminal.

(Max. 300 mA 12 V DC.)

20.Power amp (sold separately)

21.Left speaker

22.Right speaker

23.Rear

24.Use this for connections when you have the separately available amplifier.

&RQQHFWLQJ WKH 8QLWV

1RWH

This unit is for vehicles with a 12-volt battery and negative grounding. Before installing it in a recreational vehicle, truck, or bus, check the battery voltage.

To avoid shorts in the electrical system, be sure to disconnect the battery cable before beginning installation.

Secure the wiring with cable clamps or adhesive tape. To protect the wiring, wrap adhesive tape around them where they lie against metal parts.

Route and secure all wiring so it cannot touch any moving parts, such as the gear shift, handbrake and seat rails. Do not route wiring in places that get hot, such as near the heater outlet. If the insulation of the wiring melts or gets torn, there is a danger of the wiring short-circuiting to the vehicle body.

Don't pass the yellow lead through a hole into the engine compartment to connect to the battery. This will damage the lead insulation and cause a very dangerous short.

Do not shorten any leads. If you do, the protection circuit may fail to work when it should.

Never feed power to other equipment by cutting the insulation of the power supply lead of the unit and tapping into the lead. The current capacity of the lead will be exceeded, causing overheating.

When replacing fuse, be sure to use only fuse of the rating prescribed on this unit.

Since a unique BPTL circuit is employed, never wire so the speaker leads are directly grounded or the left and right speaker leads are common.

The black lead is ground. Please ground this lead separately from the ground of high-current products such as power amps.

If you ground the products together and the ground becomes detached, there is a risk of damage to the products or fire.

Speakers connected to this unit must be high-power types possessing minimum rating of 40 W and impedance of 4 to 8 ohms. Connecting speakers with output and/or impedance values other than those noted here can damage the speakers.

When an external power amp is being used with this system, be sure not to connect the blue/white lead to the amp's power terminal. Likewise, do not connect the blue/white lead to the power terminal of the auto-antenna. Such connection could cause excessive current drain and malfunction.

To prevent incorrect connection, the input side of the IP-BUS connector is blue, and the output side is black. Connect the connectors of the same colors correctly.

If this unit is installed in a vehicle that does not have an ACC (accessory) position on the ignition switch, the red lead of the unit should be connected to a terminal coupled with ignition switch ON/ OFF operations. If this is not done, the vehicle battery may be drained when you are away from the vehicle for several hours.

O

FF

ACC

O

N

 

S

 

T

 

A

T

R

O

FF

O

N

 

S

 

T

 

A

T

R

ACC position

No ACC position

.H\ )LQGHU

 

 

 

$%

PTY button

SOURCE button

Cassette door

 

buttons

 

 

 

 

Eject

TA/AF button

Programmable button

button

 

 

 

buttons

 

 

 

 

+/– button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Buttons 1 – 6

 

 

DISP/Clock

Detach button

 

 

 

 

BAND

button

 

 

button

 

 

 

AUDIO button

 

 

 

Function button

%HIRUH 8VLQJ 7KLV 3URGXFW

About This Product

This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC).

The tuner frequencies on this product are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. Use in other areas may result in improper reception. The RDS function operates only in areas with FM stations broadcasting RDS signals.

About This Manual

This product features a number of sophisticated functions ensuring superior reception and operation. All are designed for the easiest possible use, but many are not self-explanatory. This operation manual is intended to help you benefit fully from their potential and to maximize your listening enjoyment.

We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this product. It is especially important that you read and observe the "Precaution" on this page and in other sections.

In this Operation Manual, the Basic Operation for each sound source is outlined at the beginning of its explanation, covering simple operation for that source, such as merely playing music.

Precaution

The Pioneer CarStereo-Pass is for use only in Germany.

Keep this manual handy as a reference for operating procedures and precautions.

Always keep the volume low enough for outside sounds to be audible.

Protect the product from moisture.

If the battery is disconnected, the preset memory will be erased and must be reprogrammed.

In Case of Trouble

Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station.

'HWDFKLQJ DQG 5HSODFLQJ WKH )URQW 3DQHO

Theft Protection

The front panel of the main body is detachable to discourage theft.

Detaching the front panel

(MHFW WKH IURQW SDQHO

7R UHPRYH WKH IURQW SDQHO SXOO LWV ULJKW KDQG VLGH WRZDUG \RX

Take care not to grip it tightly or drop it.

8VH WKH SURWHFWLYH FDVH SURYLGHG WR VWRUH FDUU\ WKH GHWDFKHG IURQW SDQHO

Replacing the Front Panel

5HSODFH WKH IURQW SDQHO E\ FOLSSLQJ LW LQWR SODFH

Precaution:

Never use force or grip the display tightly when removing or replacing the front panel.

Avoid subjecting the front panel to excessive shocks.

Keep the front panel out of direct sunlight and high temperatures.

,QLWLDO 6HWWLQJ 0HQX

With this menu, you can perform initial settings for the unit. Setting options cover everything from tuning steps for the tuner to auto PI seek ON/OFF switching.

Entering the Initial Setting Menu

(QWHU WKH ,QLWLDO 6HWWLQJ 0HQX ZLWK WKH VRXUFHV RII

Hold for 2 seconds

To cancel the Initial Setting Menu, press the BAND button.

1RWH

• Holding down the Function button for 2 seconds also cancels the Initial Setting Menu.

6HOHFW WKH GHVLUHG PRGH

Each press changes the Mode ...

Each press of the Function button selects the mode in the following order: FM STEP = A-PI

Changing the FM Tuning Step

Normally set at 50 kHz during Seek tuning in the FM mode, the tuning step changes to 100 kHz when the AF or TA mode is activated.

It may be preferable to set tuning step to 50 kHz in the AF mode.

6HOHFW WKH GHVLUHG WXQLQJ VWHS

1RWH

The tuning step remains set at 50 kHz during Manual tuning.

The tuning step returns to 100 kHz if the battery is temporarily disconnected.

,QLWLDO 6HWWLQJ 0HQX

Switching the Auto PI Seek

During Preset Station PI Seek operation, you can switch the Auto PI Seek function ON/OFF. (Refer to “PI Seek Function” on page 22.)

6ZLWFK WKH $XWR 3, 6HHN 21 RU 2))

Switching the AUX mode

It is possible to use auxiliary (AUX) equipment with this product.

Activate the AUX mode when using external equipment with this product.

6ZLWFK WKH $8; PRGH 21 RU 2))

%DVLF 2SHUDWLRQ

Switching Power On

6HOHFW WKH GHVLUHG VRXUFH VXFK DV WKH WXQHU

Each press of the SOURCE button selects the desired source in the following order: Tuner + Tape + Multi-CD player + AUX

1RWH

In the following cases, the sound source will not change: *No Multi-CD player is connected to this unit.

*No cassette tape is set in this unit.

*No magazine is set in the Multi-CD player. *AUX (external input) is set to OFF. (See page 11.)

Switching Power Off

Switch the sources OFF.

Hold for 1 second

7XQHU 2SHUDWLRQ

Basic Operation of Tuner

6HOHFW 7XQHU 6HH SDJH

Each press changes the Source ...

The program service name or frequency appears on the display. (" " indicator lights when a stereo station is selected.)

6HOHFW WKH GHVLUHG EDQG

FI + FII + FIII + MW/LW

7XQH WKH UHFHLYHU WR D KLJKHU RU ORZHU IUHTXHQF\

This product’s tuner lets you select the tuning by changing the length of the time you press the button.

Manual Tuning (step by step)

0.3 seconds or less

 

 

Seek Tuning

0.3 - 2 seconds

 

 

Manual Tuning (continuously)

2 seconds or more

 

 

1RWH

To select a weak broadcasting station that cannot be tuned in with the Seek Tuning function, tune in with Manual Tuning.

7XQHU 2SHUDWLRQ

5DLVH RU ORZHU WKH YROXPH

7XUQ WKH VRXUFH 2)) 6HH SDJH

Hold for 1 second

AF Function Switching

This product’s AF function can be switched ON and OFF. AF should be switched OFF for normal tuning operations.

6ZLWFK $) 2))

Hold for 2 seconds

“AF” disappears

To switch AF ON, repeat the preceding operation.

1RWH

• You can also switch the AF Function ON/OFF in the Function Menu.

Entering the Function Menu

In this menu you can select tuner functions.

1RWH

REG, TA, PTY and AF are RDS functions. Refer to "Using RDS Function" for details and instructions on how to use these functions.

6HOHFW WKH GHVLUHG PRGH LQ )XQFWLRQ 0HQX

Each press changes the Mode ...

Each press of the Function button selects the mode in the following order: BSM + REG + LOCAL + TA + PTY SELECT + AF

1RWH

You can cancel the Function Menu by pressing the BAND button.

After selecting the Function Menu, if you do not perform an operation within about 30 seconds, the Function Menu is automatically canceled.

7XQHU 2SHUDWLRQ

Local Seek Tuning

This mode selects only stations with especially strong signals. The sensitivity can be adjusted in 4 steps for FM and 2 steps for MW/LW.

6HOHFW WKH /RFDO PRGH LQ WKH )XQFWLRQ 0HQX

6ZLWFK WKH /RFDO PRGH 21 RU 2))

6HOHFW WKH GHVLUHG /RFDO 6HHN 6HQVLWLYLW\ LQ WKH IROORZLQJ RUGHU

FM: LOCAL 1 , LOCAL 2 , LOCAL 3 , LOCAL 4

MW/LW: LOCAL 1 , LOCAL 2

1RWH

Pressing the BAND button cancels the Function Menu.

The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.

Preset Tuning

Up to 18 FM stations (6 in FI (FM1), FII (FM2) and FIII (FM3)) and 6 MW/LW stations can be stored in memory.

Store the stations in memory under buttons 1-6 beforehand with the BSM (Best Stations Memory) or Preset Memory function.

BSM (Best Stations Memory)

The BSM function stores stations in memory automatically.

6HOHFW WKH %60 PRGH LQ WKH )XQFWLRQ 0HQX

6ZLWFK WKH %60 PRGH 21

The stations with the strongest signals will be stored under buttons 1-6 and in order of their signal strength.

1RWH

• Pressing the BAND button cancels the Function Menu.

7R FDQFHO WKH SURFHVV SUHVV WKH EXWWRQ LQ WKH )XQFWLRQ 0HQX EHIRUH PHPRUL]DWLRQ LV FRPSOHWH

Preset Memory

The Preset Memory function stores stations in memory manually.

6HOHFW WKH VWDWLRQ ZKRVH IUHTXHQF\ \RX ZDQW WR VWRUH LQ PHPRU\

3UHVV RQH RI EXWWRQV IRU VHFRQGV RU ORQJHU WR VWRUH WKH GHVLUHG VWDWLRQV

Hold for 2 seconds

The station is stored in memory under the selected button.

7XQHU 2SHUDWLRQ

Recalling Preset Stations

There are two ways to recall preset stations.

Direct Recall

3UHVV RQH RI EXWWRQV WR UHFDOO D VWDWLRQ SUHVHW XQGHU WKDW EXWWRQ

Sequential Recall

5HFDOO D VWDWLRQ SUHVHW XQGHU EXWWRQ

Using the Programmable Button

You can memorize Function Menu BSM, REG and LOCAL functions in the Programmable button.

Initially, the BSM function is memorized in the Programmable button.

Setting the Programmable Button

6HOHFW WKH 3URJUDPPDEOH EXWWRQ VHWWLQJ PRGH

Hold for 2 seconds

6HOHFW WKH IXQFWLRQ \RX ZDQW WR PHPRUL]H LQ WKH 3URJUDPPDEOH EXWWRQ

0HPRUL]H WKH IXQFWLRQ LQ WKH 3URJUDPPDEOH EXWWRQ

1RWH

• Pressing the BAND button cancels the Programmable button setting mode.

Using the Programmable Button

The Programmable button operates in a different way depending on the function programmed (memorized).

8VH WKH SURJUDPPDEOH EXWWRQ

Function

Press

 

Hold for 2 seconds

BSM

———

ON/OFF

 

 

 

 

REG

ON/OFF

 

———

 

 

 

 

LOC

ON/OFF

 

Entering the Local Seek Sensitivity mode

 

 

 

 

8VLQJ 5'6 )XQFWLRQV

What is RDS?

RDS (Radio Data System) is a system for transmitting data along with FM programs. This data, which is inaudible, provides a variety of features such as: program service name, program type display, traffic announcement standby, automatic tuning and program type tuning, intended to aid radio listeners in tuning to a desired station.

1RWH

RDS service may not be provided by all stations.

RDS functions, like AF (Alternative frequencies search) and TA (Traffic Announcement standby), are only active when your radio is tuned to RDS stations.

Program Service Name Display

With this function, the names of networks/stations providing RDS services replace the frequency on the display a few seconds after they are tuned in.

&KDQJH WKH GLVSOD\

Each press changes the Mode ...

Each press of the DISP/Clock button selects the mode in the following order: Program Service Name + PTY Information + Frequency

1RWH

After switching displays, if you do not perform an operation within 8 seconds, the Program Service Name is automatically displayed.

Displaying PTY Information

PTY (Program Type ID code) information for the currently tuned station appears on the display for 8 seconds. The information is correlated with the list in the section “PTY Function” on page 25.

Displaying the Frequency

The frequency of the current station appears on the display.

AF Function

The AF (Alternative Frequencies search) function is used to search for other frequencies in the same network as the currently tuned station. It automatically retunes the receiver to another frequency in the network which is broadcasting a stronger signal when there are problems with reception of the currently tuned station or better reception is possible on a different frequency.

1RWH

AF tunes the receiver only to RDS stations when you use Seek tuning or BSM Auto Memory with the "AF" indicator ON.

When you recall a preset station, the tuner may update the preset station with a new frequency from the station's AF list. (This is only available when using presets on the FM1 and FM2 bands.) No preset number appears on the display if the RDS data for the station received differs from that for the originally stored station.

Sound may be temporarily interrupted by another program during an AF frequency search.

When the tuner is tuned to a non-RDS station, the "AF" indicator flashes.

AF can be switched ON or OFF independently for each FM band.

Activating/deactivating the AF Function

AF is set to ON by default.

7XUQ $) WR 2))

Hold for 2 seconds

"AF" disappears

To turn AF back ON, repeat the preceding operation.

1RWH

• You can also switch the AF Function ON/OFF in the Function Menu.

8VLQJ 5'6 )XQFWLRQV

PI Seek Function

The tuner searches for another frequency broadcasting the same programming.

"PI SEEK" appears on the display and the radio volume is muted during a PI Seek. The muting is discontinued after completion of the PI Seek, whether or not the PI seek has succeeded.

If the PI Seek is unsuccessful, the tuner returns to the previous frequency.

Auto PI Seek

If the tuner fails to locate a suitable alternative frequency or if the broadcasting signal is too weak for proper reception, the PI Seek will automatically start.

Preset Station PI Seek

When preset stations cannot be recalled, as when traveling long distances, the unit can be set to perform PI Seek also during preset recall.

The default setting for PI Seek is OFF.

1RWH

• Refer to "Initial Setting Menu" for details on how to switch this unit ON/OFF.

REG Function

When AF is used to retune the tuner automatically, REG (regional) limits the selection to stations broadcasting regional programs.

1RWH

Regional programming and regional networks are organized differently depending on the country (i.e., they may change according to the hour, state or broadcast area).

The preset number may disappear on the display if the tuner tunes in a regional station which differs from the originally set station.

Activating REG

The REG function can be turned ON independently for each FM band.

6HOHFW WKH 5(* PRGH LQ WKH )XQFWLRQ 0HQX

$FWLYDWH RU GHDFWLYDWH 5(* ZKLOH LQ DQ )0 EDQG

"REG"

1RWH

• Pressing the BAND button cancels the Function Menu.

TA Function

The TA (Traffic Announcement standby) function lets you receive traffic announcements automatically, no matter what source (tuner, cassette player or multi-CD player) you are listening to. The TA function can be activated for either a TP station (a station that broadcasts traffic information) or an EON TP station (a station carrying information which crossreferences TP stations).

Activating/Deactivating the TA Function

7XQH LQ D 73 RU (21 73 VWDWLRQ

The "TP" indicator lights when the tuner is tuned to a TP station, and both the "EON" and "TP" indicators light when it is tuned to an EON TP station.

$FWLYDWH WKH 7$ IXQFWLRQ

"TA"

The "TA" indicator lights, indicating that the tuner is waiting for traffic announcements.

Repeat the preceding operation when no traffic announcement is being received to deactivate the TA function.

1RWH

You can also switch the TA Function ON/OFF in the Function Menu.

Only the (+), (–), TA/AF, AUDIO, DISP/Clock and SOURCE buttons can be used during traffic announcement reception.

The system switches back to the original source following traffic announcement reception.

The TA function can be activated from the cassette player or multi-CD player mode if the tuner was last set to the FM band but not if it was last set to the MW/LW band.

If the tuner was last set to FM, turning on the TA function lets you operate other tuning functions while listening to a cassette or CD.

Only TP or EON-TP stations are tuned in during the Seek Tuning mode when the "TA" indicator is ON.

Only TP or EON-TP stations are stored by BSM when the "TA" indicator is ON.

8VLQJ 5'6 )XQFWLRQV

Canceling Traffic Announcements

3UHVV WKH 7$ $) EXWWRQ ZKLOH D WUDIILF DQQRXQFHPHQW LV EHLQJ UHFHLYHG WR FDQFHO WKH DQQRXQFHPHQW DQG UHWXUQ WR WKH RULJLQDO VRXUFH

The announcement is canceled but the tuner remains in the TA mode until the TA/AF button is pressed again.

Adjusting the TA Volume

When a traffic announcement begins, the volume adjusts automatically to a preset level to enable you to hear the announcement clearly.

6HW WKH YROXPH E\ DGMXVWLQJ LW GXULQJ UHFHSWLRQ RI D WUDIILF DQQRXQFHPHQW

The newly set volume is stored in memory and recalled for subsequent traffic announcements.

TP Alarm function

About 30 seconds after the "TP" or "EON" indicator is extinguished due to a weak signal, a 5 second beep sounds to remind you to select another TP or EON-TP station.

,I \RX DUH OLVWHQLQJ WR WKH WXQHU WXQH LQ DQRWKHU 73 VWDWLRQ RU (21 73 VWDWLRQ

In the cassette player mode, the tuner automatically seeks out the TP station with the strongest signal in the current area 10 (or 30)* seconds after "TP" disappears from the display.

7LPH WDNHQ EHIRUH 6HHN EHJLQV

TA function ON

10 seconds

TA, AF functions ON

30 seconds

 

 

PTY Function

The PTY function enables you to select stations by the type of programming they broadcast (PTY Search). It also provides automatic tuning to emergency broadcasts (PTY Alarm).

1RWH

• PTY code program types are as follows:

1.

NEWS:

News.

2.

AFFAIRS:

Current affairs.

3.

INFO:

General information and advice.

4.

SPORT:

Sports programs.

5.

EDUCATE:

Educational programs.

6.

DRAMA:

All radio plays and serials.

7.

CULTURE:

Programs concerned with any aspect of national or regional culture.

8.

SCIENCE:

Programs about nature, science and technology.

9.

VARIED:

Light entertainment programs.

10. POP MUS:

Popular music.

11. ROCK MUS:

Contemporary modern music.

12. EASY MUS:

Easy listening music.

13. L. CLASS:

Light classical music.

14. CLASSICS:

Serious classical music.

15. OTH MUS:

Other types of music, which can't be categorized.

16. WEATHER:

Weather reports/Meteorological information.

17. FINANCE:

Stock market reports, commerce, trading etc.

18. CHILDREN:

Children's programs.

19. SOCIAL:

Social affairs programs.

20. RELIGION:

Religion affairs programs or services.

21. PHONE IN:

Phone in based programs.

22. TOURING:

Travel programs, not for announcements about traffic problem.

23. LEISURE:

Programs about hobbies and recreational activities.

24. JAZZ:

Jazz music based programs.

25. COUNTRY:

Country music based programs.

26. NAT MUS:

National music based programs.

27. OLDIES:

Oldies music, 'Golden age' based programs.

28. FOLK MUS:

Folk music based programs.

29. DOCUMENT:

Documentary programs.

If a PTY code of zero is received from a station, "NONE" will be displayed. This indicates that the station has not defined its programme contents.

If the signal is too weak for this product to pick up the PTY code, "NO PTY" will be displayed.

8VLQJ 5'6 )XQFWLRQV

PTY Search Setting Function

(QWHU WKH 37< 6HDUFK VHWWLQJ PRGH

Hold for 2 seconds

“PTY”

The "PTY" indicator lights and the name of a program type appears on the display for 5 seconds.

1RWH

CURRENT sets desired PTY to the program type of the current station (only for RDS stations broadcasting PTY information).

6HOHFW RQH RI WKH 37<V

:KHQ WKH GHVLUHG SURJUDPPLQJ W\SH DSSHDUV RQ WKH GLVSOD\ UHWXUQ WR WKH QRUPDO GLVSOD\

1RWH

You can also select the PTY Search Setting PTY Code in the Function Menu, and switch the PTY Search Function ON/OFF.

PTY Search Function

,QLWLDWH D 37< VHDUFK

The tuner searches for a station broadcasting the desired PTY.

1RWH

The program of some stations may differ from that indicated by the transmitted PTY.

If no station broadcasting the selected programming type is found, "NOT FOUND" is displayed for about 2 seconds, and the tuner returns to the original station.

PTY Alarm

PTY Alarm is a special PTY code for announcements regarding emergencies such as natural disasters. When the tuner receives the radio alarm code, "ALARM" appears on the display and the volume adjusts to the TA volume. When the station stops broadcasting the emergency announcement, the system returns to the previous source.

1RWH

Only the (+), (–), TA/AF, AUDIO, DISP/Clock and SOURCE buttons can be used during emergency announcement reception.

The system switches back to the original source following emergency announcement reception.

Canceling Emergency Announcements

3UHVV WKH 7$ $) EXWWRQ GXULQJ HPHUJHQF\ DQQRXQFHPHQW UHFHSWLRQ WR FDQFHO WKH DQQRXQFHPHQW DQG UHWXUQ WR WKH SUHYLRXV VRXUFH

8VLQJ WKH &DVVHWWH 3OD\HU

Basic Operation of Cassette Player

,QVHUW WKH FDVVHWWH WDSH

6ZLWFK WDSH SOD\EDFN IURP VLGH $ WR VLGH % RU YLFH YHUVD

Same Time

5DLVH RU ORZHU WKH YROXPH

5HPRYH WKH FDVVHWWH WDSH

1RWH

The Tape function can be turned ON/OFF with the cassette tape remaining in this product. (See page 12.)

Fast Forward/Rewind

Fast Forward

While "<-->" is displayed, the system fast-forwards the cassette tape to the end of the current side.

)DVW IRUZDUG WKH FDVVHWWH WDSH E\ SUHVVLQJ WKH EXWWRQ IRU WKH VDPH GLUHFWLRQ DV WKH WDSH SOD\ LQGLFDWRU

Rewind

While "<-->" is displayed, the system rewinds the cassette tape to the beginning of the current side.

5HZLQG WKH FDVVHWWH WDSH E\ SUHVVLQJ WKH EXWWRQ IRU WKH RSSRVLWH GLUHFWLRQ DV WKH WDSH SOD\ LQGLFDWRU

Entering the Function Menu

In this menu you can select Tape functions.

6HOHFW WKH 5DGLR ,QWHUFHSW PRGH LQ )XQFWLRQ 0HQX

1RWH

You can cancel the Function Menu by pressing the BAND button.

After selecting the Function Menu, if you do not perform an operation within about 30 seconds, the Function Menu is automatically canceled.

This unit's cassette Function Menu enables Radio Intercept mode ON/OFF switching only. If you press the Function button for 2 seconds or more and select the Programmable button Setting mode, you can memorize the Radio Intercept mode ON/OFF setting beforehand.

You can cancel the Programmable button setting mode by pressing the BAND button.

8VLQJ WKH &DVVHWWH 3OD\HU

Radio Intercept (RI)

This function allows you to listen to the radio during tape fast-forwarding/rewinding.

6ZLWFK WKH 5DGLR ,QWHUFHSW PRGH 21 RU 2))

1RWH

• You can also switch the Radio Intercept mode ON/OFF by pressing the Programmable button.

&DVVHWWH 3OD\HU DQG &DUH

Precaution

About the Cassette Player

A loose or warped label on a cassette tape may interfere with the eject mechanism of the unit or cause the cassette to become jammed in the unit. Avoid using such tapes or remove such labels from the cassette before attempting use.

About Cassette Tapes

Do not use tapes longer than C-90 type (90 min.) cassettes. Longer tapes can interfere with tape transport.

Storing cassettes in areas directly exposed to sunlight or high temperatures can distort them and subsequently interfere with tape transport.

 

 

 

 

 

 

 

 

 

 

 

D

 

 

 

 

 

 

 

 

 

 

E

 

 

 

 

 

 

 

 

 

D

 

 

 

 

 

 

 

 

 

N

 

 

 

 

 

 

 

 

 

E

 

 

 

 

 

 

 

 

 

M

 

 

 

 

 

 

 

 

 

M

 

 

 

 

 

 

 

 

 

O

 

 

 

 

 

 

 

 

 

C

 

 

 

 

 

 

 

 

 

E

 

 

 

 

 

 

 

 

 

T

R

 

 

 

 

 

 

 

 

 

O

 

 

 

 

 

 

 

 

 

 

N

 

 

 

 

 

 

 

 

 

 

 

Store unused tapes in a tape case where there is no danger of them becoming loose or being exposed to dust.

Cleaning the Head

If the head becomes dirty, the sound quality will deteriorate and there will be sound dropouts and other imperfections in performance. In this case, the head must be cleaned.

8VLQJ 0XOWL &' 3OD\HU

This product can control one or more multi-CD players.

Basic Operation of Multi-CD Players

6HOHFW WKH PXOWL &' SOD\HU VRXUFH 6HH SDJH

Each press changes the Source

1RWH

The multi-CD player may perform a preparatory operation, such as verifying the presence of a disc or reading disc information, when the power is turned ON or a new disc is selected for playback. “READY” is displayed.

If the multi-CD player cannot operate properly, an error message such as “ERROR 14” is displayed. Refer to the multi-CD player owner’s manual.

6HOHFW WKH GHVLUHG GLVF

5HYHUVH RU DGYDQFH WUDFN E\ WUDFN

5DLVH RU ORZHU WKH YROXPH

7XUQ WKH VRXUFH 2)) 6HH SDJH

Hold for 1 second

Switching the Multi-CD Player

It is possible to connect up to three multi-CD players by means of a multiple installation adapter. When two or more multi-CD players are installed, their priorities must be specified. Follow the multi-CD player instructions carefully, and set the address switches properly.

6HOHFW WKH PXOWL &' SOD\HU \RX ZDQW WR XVH

M1 + M2 + M3

Disc Number Search

Disc Number Search (for 6-Disc, 12-Disc types)

You can select discs directly with the 1 to 6 buttons. Just press the number corresponding to the disc you want to listen to.

1RWH

When a 12-Disc Multi-CD Player is connected and you want to select disc 7 to 12, press the 1 to 6 buttons for 2 seconds or longer.

6HOHFW WKH GHVLUHG GLVF HJ 3UHVV EXWWRQ

Disc Number Rough Search (for 50-Disc type only)

This handy function lets you select discs loaded in a 50-Disc Multi-CD Player using the 1 to 5 buttons. The 50 discs are divided into five blocks, with each of the 1 to 5 buttons assigned to a block.

For example, if you press button 1, discs 10 through 19 are searched in order, and then the disc with the lowest disc number is selected.

1RWH

Pressing button 5 lets you select the 50th disc only.

Button 6 does not operate.

Rough search of discs 1 to 9 is not possible. Use the buttons to select a desired disc.

8VLQJ 0XOWL &' 3OD\HU

3UHVV WKH DSSURSULDWH EXWWRQ IURP WR WR VHOHFW WKH EORFN FRQWDLQLQJ WKH GHVLUHG GLVF HJ 3UHVV EXWWRQ

6HOHFW WKH GHVLUHG GLVF

Track Search and Fast-forward/Reverse

Besides Track Search convenience when searching for a desired track, this unit also lets you fast-forward and reverse through tracks to find a desired phrase or section of music.

Track Search

This feature enables you to advance or reverse track by track.

5HYHUVH RU DGYDQFH WUDFN E\ WUDFN

Hold for half a second or less

Fast-forward/Reverse

This feature enables you to advance or reverse at high speed between tracks.

5HYHUVH RU IDVW IRUZDUG WKURXJK WUDFNV

Continue pressing

Entering the Function Menu

In this menu you can select Multi-CD Player functions.

6HOHFW WKH GHVLUHG PRGH LQ )XQFWLRQ 0HQX

Each press changes the Mode ...

Each press of the Function button selects the mode in the following order:

REPEAT + RANDOM + ITS P + PAUSE

1RWH

You can cancel the Function Menu by pressing the BAND button.

After selecting the Function Menu, if you do not perform an operation within about 30 seconds, the Function Menu is automatically canceled.

Entering the Detailed Setting Menu

In this menu you can perform Disc Title Input, and ITS Program and Programmable button

settings.

(QWHU WKH 'HWDLOHG 6HWWLQJ 0HQX

Hold for 2 seconds

Each press of the Function button selects the mode in the following order: TITLE IN + ITS + PGM-FUNC

To cancel the Detailed Setting Menu, hold down the Function button for 2 seconds.

1RWH

• Pressing the BAND button also cancels the Detailed Setting Menu.

Pause

6HOHFW WKH 3DXVH PRGH LQ WKH )XQFWLRQ 0HQX

6WRS SOD\EDFN WHPSRUDULO\ RU UHVWDUWV WKH V\VWHP

1RWH

• Pressing the BAND button cancels the Function Menu.

8VLQJ 0XOWL &' 3OD\HU

Multi-CD Player Repeat Modes

Multi-CD players offer four repeat modes: One-track Repeat, Disc Repeat, Multi-CD player Repeat and All Repeat. Multi-CD player Repeat is the default mode (normal play) when one or more multi-CD players is installed.

6HOHFW WKH 5HSHDW 6HOHFWLQJ PRGH LQ WKH )XQFWLRQ 0HQX

6HOHFW WKH GHVLUHG UHSHDW PRGH LQ WKH IROORZLQJ RUGHU

Multi-CD player Repeat (“MCD” is displayed) + ALL Repeat (“ALL” is displayed) + Onetrack Repeat (“TRK” is displayed) + Disc Repeat (“DSC” is displayed)

1RWH

Pressing the BAND button cancels the Function Menu.

All Repeat is available only when two or more multi-CD players are installed.

Multi-CD player repeat modes

0RGH

2SHUDWLRQ

 

 

One-track Repeat

Plays current track repeatedly.

 

• When Track Search or fast forward/reverse is performed, the mode

 

returns to the Disc Repeat mode.

 

• When a different disc or multi-CD player is selected, the mode

 

switches to the Multi-CD player Repeat mode.

 

 

Disc Repeat

Plays current disc repeatedly.

 

• When a different disc or multi-CD player is selected, the mode

 

switches to the Multi-CD player Repeat mode.

 

 

Multi-CD player Repeat

Plays all discs loaded in the multi-CD player magazine repeatedly in order,

(normal play)

starting with the first disc.

 

 

All Repeat

Plays all discs in the magazines of all multi-CD players in order.

 

 

Multi-CD Player Random Play

Random Play is available when one or more multi-CD players are in use.

6HOHFW WKH 5DQGRP PRGH LQ WKH )XQFWLRQ 0HQX

6ZLWFK WKH 5DQGRP 3OD\ 21 RU 2))

When Multi-CD Player Random Play is ON, you can combine it with Repeat Mode to operate as shown below. Switching the Repeat Mode switches Random Play OFF.

1RWH

Pressing the BAND button cancels the Function Menu.

Since playback is random, the same track may be repeated consecutively.

Multi-CD player Random Play options

0RGH

2SHUDWLRQ

 

 

 

 

One-track Repeat

The mode returns to the Disc Repeat mode, and all tracks on the current disc

 

 

are played randomly.

 

 

Disc Repeat

All tracks on the current disc are played randomly.

 

 

 

Multi-CD player Repeat

All tracks on the discs in the multi-CD player magazine are played randomly.

 

 

 

All Repeat

All tracks on the discs in all the multi-CD players are played randomly.

 

 

 

 

ITS (Instant Track Selection)

The ITS function allows you to search for the track you wish to play back when one or more multi-CD players are installed. You can use ITS to program automatic playback of up to 24 tracks per disc from up to 100 discs. (You can store ITS program and Disc Title data for up to 100 discs in memory.) After 100 discs have been programmed, data for a new disc will overwrite the data for the disc that has not been played back for the longest time.

ITS Programming

ITS programming can be conducted in any multi-CD player playback mode except ITS playback.

3OD\ WKH WUDFN \RX ZLVK WR SURJUDP

6HOHFW WKH ,76 3URJUDPPLQJ PRGH LQ WKH 'HWDLOHG 6HWWLQJ 0HQX

8VLQJ 0XOWL &' 3OD\HUV

3URJUDP WKH GHVLUHG WUDFN

1RWH

• Pressing the BAND button cancels the Detailed Setting Menu.

ITS Playback

ITS playback can be performed in any repeat mode.

6HOHFW WKH ,76 3OD\EDFN PRGH LQ WKH )XQFWLRQ 0HQX

6ZLWFK WKH ,76 3OD\EDFN 21 RU 2))

When ITS Play is ON, you can combine it with Repeat Mode to operate as shown below. If you change Repeat Mode into One-track Repeat, ITS Play will be turned OFF.

The ITS programmed tracks are played back in order from first to last.

1RWH

Pressing the BAND button cancels the Function Menu.

If no track in the current range is programmed for ITS playback, “ITS EMPTY” is displayed.

Multi-CD player ITS play

0RGH

2SHUDWLRQ

 

 

One-track Repeat

The mode returns to the Disc Repeat mode and all programmed tracks on the

 

current disc are played.

 

 

Disc Repeat

All programmed tracks on the current disc are played.

 

 

Multi-CD player Repeat

All programmed tracks on the discs in the multi-CD player magazine are

 

played back.

 

• If there are no programmed tracks on the current disc,

 

ITS advances to the next disc.

 

 

All Repeat

The programmed tracks on all the discs in the magazines of all the installed

 

multi-CD are played back.

 

• If there are no programmed tracks on the current disc (or multi-CD

 

player), ITS advances to the next disc (or multi-CD player).

 

 

Erasing ITS Programs

ITS programs for up to 100 discs are stored permanently until you erase them.

Erase a track program

6HOHFW WKH WUDFN \RX ZLVK WR HUDVH GXULQJ ,76 SOD\EDFN

6HOHFW WKH ,76 3URJUDPPLQJ PRGH LQ WKH 'HWDLOHG 6HWWLQJ 0HQX

(UDVH WKH WUDFN SURJUDP

ITS is canceled and playback of the next ITS-programmed track begins. If there are no more programmed tracks in the current range, “ITS EMPTY” is displayed and normal playback resumes.

1RWH

Pressing the BAND button cancels the Detailed Setting Menu.

Erase a disc program

6HOHFW WKH GLVF \RX ZLVK WR HUDVH ZKLOH WKH GLVF LV SOD\LQJ

6HOHFW WKH ,76 3URJUDPPLQJ PRGH LQ WKH 'HWDLOHG 6HWWLQJ 0HQX

(UDVH WKH GLVF SURJUDP

1RWH

Pressing the BAND button cancels the Detailed Setting Menu.

8VLQJ 0XOWL &' 3OD\HUV

Disc Title Input

You can input Titles up to 10 letters long for up to 100 discs. Using this function lets you easily search for and select a desired disc for play. (You can store ITS program and Disc Title data for up to 100 discs in memory.)

3OD\ WKH GLVF \RX ZLVK WR LQSXW WKH GLVF WLWOH

6HOHFW WKH 'LVF 7LWOH ,QSXW PRGH LQ WKH 'HWDLOHG 6HWWLQJ 0HQX

6HOHFW D OHWWHU QXPEHU RU V\PERO

To insert a space, select the flashing cursor.

5HYHUVH RU DGYDQFH ER[ E\ ER[

:KHQ WKH WLWOH LV FRPSOHWHG VWRUH LW LQ PHPRU\ WR PDNH WKH IODVKLQJ FXUVRU IDGH RXW

The title remains on the message display.

1RWH

Pressing the BAND button cancels the Detailed Setting Menu.

Titles remain in memory, even after the disc has been removed from the magazine, and are recalled when the disc is reinserted.

After the titles for 100 discs have been entered, data for a new disc will overwrite the data for the disc that has not been played back for the longest time. If a Multi-CD player is installed, the data is stored in the Multi-CD playerÕs memory.

Displaying Disc Titles

&KDQJH WKH 'LVF 7LWOH GLVSOD\ RI WKH FXUUHQW GLVF

If no title has been input for a disc, “NO TITLE” flashes on the display for 8 seconds, after which the display becomes blank.

Repeat the preceding operation to return to the normal display.

Using the Programmable Button

In the Function Menu, you can memorize the PAUSE, REPEAT, RANDOM, and ITS functions in the Programmable button.

Initially, PAUSE is memorized in the Programmable button.

Setting the Programmable Button

6HOHFW WKH 3URJUDPPDEOH EXWWRQ VHWWLQJ PRGH LQ WKH 'HWDLOHG 6HWWLQJ 0HQX

6HOHFW WKH IXQFWLRQ \RX ZDQW WR PHPRUL]H LQ WKH 3URJUDPPDEOH EXWWRQ

0HPRUL]H WKH IXQFWLRQ LQ WKH 3URJUDPPDEOH EXWWRQ

1RWH

• Pressing the BAND button cancels the Detailed Setting Menu.

8VLQJ 0XOWL &' 3OD\HUV

Using the Programmable Button

The Programmable button operates in a different way depending on the function programmed (memorized).

8VH WKH 3URJUDPPEOH EXWWRQ

)XQFWLRQ

3UHVV

+ROG IRU VHFRQGV

 

 

 

PAUSE

ON/OFF

—–——

 

 

 

REPEAT

Selecting the mode

—–——

 

 

 

RANDOM

ON/OFF

—–——

 

 

 

ITS

ITS Programming

ON/OFF

 

 

 

$XGLR $GMXVWPHQW

Selecting the Mode

6HOHFW WKH PRGH \RX ZDQW WR DGMXVW

Each press changes the Mode ...

Each press of the AUDIO button selects the mode in the following order: Fader/Balance + Bass + Treble + Loudness

When audio modes are selected for adjustment, the setting returns to the normal display after 30 seconds.

Balance Adjustment

This function allows you to select a Fader/Balance setting that provides ideal listening conditions in all occupied seats.

6HOHFW WKH )DGHU %DODQFH PRGH

After adjustment use the BAND button to return to the normal display.

6KLIW WKH EDODQFH SURJUHVVLYHO\ WR WKH IURQW RU UHDU VSHDNHUV

"FAD F15" – "FAD R15" is displayed as it moves from front to rear.

1RWH

• "FAD 00" is the proper setting when 2 speakers are in use.

6KLIW WKH EDODQFH WR WKH OHIW RU ULJKW VSHDNHU UHVSHFWLYHO\

"BAL L9" – "BAL R9" is displayed as it moves from left to right.

$XGLR $GMXVWPHQW

Bass/Treble Adjustment

This product is equipped with two tone adjustment modes, the Bass Adjustment and Treble Adjustment modes.

6HOHFW %DVV $GMXVWPHQW PRGH RU 7UHEOH $GMXVWPHQW PRGH

After adjustment use the BAND button to return to the normal display.

,QFUHDVH RU GHFUHDVH WKH LQWHQVLW\ RI WKH EDVV RU WUHEOH ZKLFKHYHU LV VHOHFWHG

The display shows "+6" – "-6".

5HSHDW VWHSV ± DERYH IRU WKH RWKHU %DVV RU 7UHEOH $GMXVWPHQW PRGH

Loudness Adjustment (LOUD)

The Loudness function compensates for deficiencies in the low and high sound ranges at low volume.

6HOHFW WKH /RXGQHVV DGMXVWPHQW PRGH

After selection use the BAND button to return to the normal display.

6ZLWFK WKH /RXGQHVV IXQFWLRQ 21 RU 2))

2WKHU )XQFWLRQV

Time Display/Setting

Displaying the time

7R WXUQ WKH WLPH GLVSOD\ 21 ZLWK WKH 6RXUFH 21

Hold for 2 seconds

The time display disappears temporarily when you perform another operation, but the time indication returns to the display after 25 seconds.

Setting the Hours

:KLOH KROGLQJ GRZQ WKH ',63 &ORFN EXWWRQ IRU DW OHDVW VHFRQGV SUHVV EXWWRQ

WR VHW WKH KRXU

Hold for 2 seconds

Setting the Minutes

:KLOH KROGLQJ GRZQ WKH ',63 &ORFN EXWWRQ IRU DW OHDVW VHFRQGV SUHVV EXWWRQ

WR VHW WKH PLQXWH

Hold for 2 seconds

When you release the DISP/Clock button, the second count begins from 00 seconds.

2WKHU )XQFWLRQV

Synchronizing with the time announcement

:KLOH KROGLQJ GRZQ WKH ',63 &ORFN EXWWRQ IRU DW OHDVW VHFRQGV SUHVV EXWWRQ

WR UHVHW WKH PLQXWH DQG VHFRQG LQGLFDWLRQV WR ]HUR ([DPSOH :KHQ V\QFKURQL]LQJ EHWZHHQ DQG

Hold for 2 seconds

1RWH

The hour and minute can be advanced by pressing the respective buttons either consecutively or continuously.

Using the AUX mode

It is possible to use auxiliary (AUX) equipment with this product. Activate the AUX mode when using external equipment with this product.

Selecting the AUX Mode

6HOHFW $8;

Each press changes the Source ...

AUX Title Input

The display title for AUX mode can be changed.

6HOHFW WKH $X[ 7LWOH ,QSXW PRGH LQ 'HWDLOHG 6HWWLQJ 0HQX

Hold for 2 seconds

,QSXW WKH $X[ 7LWOH

Refer to “Disc Title Input” on page 40, and perform procedures 3 to 5 in the same way.

1RWH

When using the “CD-RB20” inter connector to connect an auxiliary component, switch power to that component ON only when you want to listen to it. If power to the auxiliary component is switched ON when you are listening to another source, you will hear sound from both sources simultaneously (sound will be mixed).

6SHFLILFDWLRQV

General

Power source ...............

14.4 V DC (10.8 – 15.1 V allowable)

Grounding system ............................................

 

Negative type

Max. current consumption

.............................................

8.5 A

Dimensions

 

178 (W) - 50 (H) - 150

(D) mm

(mounting size) ..........

 

(front face) ..................

 

188 (W) - 58 (H) - 19

(D) mm

Weight .........................................................................

 

 

1.2 kg

Amplifier

Maximum power output ..........................................

40 W - 4

Continuous power output ........................................

22 W - 4

...............................................

(DIN45324, +B = 14.4 V)

Load impedance ...............................

4 (4 – 8 allowable)

Tone controls

 

(Bass) .................................................

±12 dB (100 Hz)

(Treble) ...............................................

±12 dB (10 kHz)

Loudness contour ..............

+10 dB (100 Hz), +7 dB (10 kHz)

.............................................................

(volume: -30 dB)

Cassette player

Tape .............................

Compact cassette tape (C-30 – C-90)

Tape speed ...........................................................

 

4.8 cm/sec.

Fast forward/rewinding time ...........

Approx. 90 sec. for C-60

Wow & flutter ..............................................

 

0.13% (WRMS)

Frequency response ..........................

 

40 – 14,000 Hz (±3 dB)

Stereo separation ..........................................................

 

45 dB

Signal-to-noise ratio .........................

 

52 dB (IEC-A network)

FM tuner

Frequency range ........................................... 87.5 – 108 MHz Usable sensitivity

....................... 11 dBf (1.0 µV/75 , mono, S/N: 30 dB)

50 dB quieting sensitivity

......... 16 dBf (1.7 µV/75 , mono)

Signal-to-noise ratio .........................

70 dB (IEC-A network)

Distortion ..............................

0.3% (at 65 dBf, 1 kHz, stereo)

Frequency response ..........................

30 – 15,000 Hz (±3 dB)

Stereo separation ............................

40 dB (at 65 dBf, 1 kHz)

MW tuner

Frequency range ..........................................

531 – 1,602 kHz

Usable sensitivity ...................................

18 µV (S/N: 20 dB)

Selectivity .....................................................

50 dB (±9 kHz)

LW tuner

Frequency range .............................................

153 – 281 kHz

Usable sensitivity ...................................

30 µV (S/N: 20 dB)

Selectivity .....................................................

50 dB (±9 kHz)

1RWH

Specifications and the design are subject to possible modification without notice due to improvements.

France: tapez 36 15 PIONEER

PIONEER ELECTRONIC CORPORATION

1-4-1 MEGURO, MEGURO-KU, TOKYO 153-8654, JAPAN

PIONEER ELECTRONICS (USA) INC.

P.O. Box 1760, Long Beach, California 90801, U.S.A. TEL: (800) 421-1404

PIONEER ELECTRONIC (EUROPE) N.V.

Haven 1087 Keetberglaan 1, 9120 Melsele, Belgium TEL:(0) 3/570.05.11

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundary Road, Braeside, Victoria 3195, Australia TEL: (03) 580-9911

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: (905) 479-4411

PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.

San Lorenzo Num 1009 3er piso Desp. 302 Col. Del Valle, Mexico D.F. C.P. 03100 TEL: 5-688-52-90

<99B00F0R01>

Published by Pioneer Electronic Corporation. Copyright © 1999 by Pioneer Electronic Corporation. All rights reserved.

Printed in Belgium

MAN-KEH-P2800R-GB/B