Pioneer DJM-1000, DRB1371D User Manual

930.74 Kb
Loading...

DJ MIXER

DJM-1000

Operating Instructions

S002_En
D8-10-1-2_En
D2-4-4-1_EF
D8-10-3a_En
D3-4-2-1-3_A_En
K015 En

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.

In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However the method of connecting and operating the unit is the same.

IMPORTANT

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

D3-4-2-1-1_En-A

READ INSTRUCTIONS — All the safety and operating instructions should be read before the product is operated.

RETAIN INSTRUCTIONS — The safety and operating instructions should be retained for future reference.

HEED WARNINGS — All warnings on the product and in the operating instructions should be adhered to.

FOLLOW INSTRUCTIONS — All operating and use instructions should be followed.

CLEANING — The product should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids since they may corrode the cabinet.

ATTACHMENTS — Do not use attachments not recommended by the product manufacturer as they may cause hazards.

WATER AND MOISTURE — Do not use this product near water — for example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

ACCESSORIES — Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.

CART — A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

VENTILATION — Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

POWER SOURCES — This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.

LOCATION – The appliance should be installed in a stable location.

NONUSE PERIODS – The power cord of the appliance should be unplugged from the outlet when left un-used for a long period of time.

GROUNDING OR POLARIZATION

OBJECT AND LIQUID ENTRY — Never push

• If this product is equipped with a polarized

objects of any kind into this product through

alternating current line plug (a plug having one

openings as they may touch dangerous voltage

blade wider than the other), it will fit into the

points or short-out parts that could result in a

outlet only one way. This is a safety feature. If

fire or electric shock. Never spill liquid of any

you are unable to insert the plug fully into the

kind on the product.

outlet, try reversing the plug. If the plug should

SERVICING — Do not attempt to service this

still fail to fit, contact your electrician to replace

product yourself as opening or removing covers

your obsolete outlet. Do not defeat the safety

may expose you to dangerous voltage or other

purpose of the polarized plug.

hazards. Refer all servicing to qualified service

• If this product is equipped with a three-wire

personnel.

grounding type plug, a plug having a third

DAMAGE REQUIRING SERVICE — Unplug this

(grounding) pin, it will only fit into a grounding

product from the wall outlet and refer servicing

type power outlet. This is a safety feature. If you

to qualified service personnel under the

are unable to insert the plug into the outlet,

following conditions:

contact your electrician to replace your obsolete

• When the power-supply cord or plug is

outlet. Do not defeat the safety purpose of the

damaged.

grounding type plug.

• If liquid has been spilled, or objects have fallen

POWER-CORD PROTECTION Power-supply

into the product.

cords should be routed so that they are not likely

• If the product has been exposed to rain or water.

to be walked on or pinched by items placed

• If the product does not operate normally by

upon or against them, paying particular

following the operating instructions. Adjust only

attention to cords at plugs, convenience

those controls that are covered by the operating

receptacles, and the point where they exit from

instructions as an improper adjustment of other

the product.

controls may result in damage and will often

OUTDOOR ANTENNA GROUNDING — If an

require extensive work by a qualified technician

outside antenna or cable system is connected to

to restore the product to its normal operation.

the product, be sure the antenna or cable

• If the product has been dropped or damaged in

system is grounded so as to provide some

any way.

protection against voltage surges and built-up

• When the product exhibits a distinct change in

static charges. Article 810 of the National

performance — this indicates a need for service.

Electrical Code, ANSI/NFPA 70, provides

REPLACEMENT PARTS — When replacement parts

information with regard to proper grounding of

are required, be sure the service technician has

the mast and supporting structure, grounding of

used replacement parts specified by the

the lead-in wire to an antenna discharge unit,

manufacturer or have the same characteristics

size of grounding conductors, location of

as the original part. Unauthorized substitutions

antenna-discharge unit, connection to

may result in fire, electric shock, or other

grounding electrodes, and requirements for the

hazards.

grounding electrode. See Figure A.

SAFETY CHECK — Upon completion of any service

LIGHTNING — For added protection for this

or repairs to this product, ask the service

product during a lightning storm, or when it is

technician to perform safety checks to

left unattended and unused for long periods of

determine that the product is in proper

time, unplug it from the wall outlet and

operating condition.

disconnect the antenna or cable system. This

WALL OR CEILING MOUNTING — The product

will prevent damage to the product due to

should not be mounted to a wall or ceiling.

lightning and power-line surges.

HEAT — The product should be situated away from

POWER LINES — An outside antenna system

heat sources such as radiators, heat registers,

should not be located in the vicinity of overhead

stoves, or other products (including amplifiers)

power lines or other electric light or power

that produce heat.

circuits, or where it can fall into such power

 

lines or circuits. When installing an outside

 

antenna system, extreme care should be taken

 

to keep from touching such power lines or

 

circuits as contact with them might be fatal.

 

OVERLOADING — Do not overload wall outlets,

 

extension cords, or integral convenience

 

receptacles as this can result in a risk of fire or

ANTENNA

electric shock.

 

LEAD IN

 

WIRE

 

GROUND

 

CLAMP

 

ANTENNA

 

DISCHARGE UNIT

 

(NEC SECTION 810-20)

ELECTRIC

 

SERVICE

GROUNDING CONDUCTORS

EQUIPMENT

(NEC SECTION 810-21)

 

GROUND CLAMPS

Fig. A

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

 

(NEC ART 250, PART H)

 

NEC — NATIONAL ELECTRICAL CODE

 

D1-4-2-2_En

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

WARNING

This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filed with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.

IMPORTANT NOTICE – THE SERIAL NUMBER FOR THIS EQUIPMENT IS LOCATED IN THE REAR. PLEASE WRITE THIS SERIAL NUMBER ON YOUR ENCLOSED WARRANTY CARD AND KEEP IN A

SECURE AREA. THIS IS FOR YOUR SECURITY.

D1-4-2-6-1_En

Information to User

Alteration or modifications carried out without appropriate authorization may invalidate the user’s

right to operate the equipment.

D8-10-2_En

CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.

D8-10-1-3_EF

CAUTION – PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD. RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

ATTENTION – POUR PREVENIR LES CHOCS ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVVERT.

WARNING: Handling the cord on this product or cords associated with accessories sold with the product will expose you to lead, a chemical known to the State of California and other governmental entities to cause cancer and birth defects or other reproductive harm.

Wash hands after handling

D36-P4_En

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement.

2

FEATURES

1 High sound quality design

Analog signals are transmitted via the shortest path and converted to digital signals by a 96 kHz sampling, 24 bit, high-quality A/D converter, thus passing the signals to the digital mixing stage under optimum conditions.

Through the use of a 32 bit DSP, mixing is achieved with zero sound quality degradation, and together with simultaneous ideal filtering, optimum sound is produced for professional DJs working in clubs.

To get the most from these features, a great deal of care has been paid to perfecting the sound quality, including a high-rigidity chassis to cut down unnecessary vibrations that might affect the sound, together with a high-performance power section using an

R-core transformer that supports bass quality, thus creating clear and powerful sound ideal for club performances.

2 3 band isolator

Built-in 3-band isolator capable of producing level control +6 dB to – on each bandwidth.

The sharp operation feel allows the realization of a wide variety of

DJ performances.

3 2-system, 3-type SEND/RETURN

A 2-system, 3-type SEND/RETURN (PRE INSERT/POST INSERT/ AUX) is provided to allow multiple connection variations with other external devices, such as effectors and samplers, thus widening the range of DJ play potential.

4 Fader curve adjust

The fader curve adjust allows adjustment not only the cross fader curve (as on former models), but also of channel fader curve.

Both faders’ functions can be adjusted within 17 steps, so that DJs can customize the settings to their own preferred settings.

5 Digital IN/OUT

Using digital input connectors provided for each of the sampling rates (44.1/48/96 kHz), a system can be built in which no sound quality degradation occurs when connecting to external digital devices.

A DIGITAL OUT connector with 24 bit/96 kHz sampling rate is provided, facilitating recording at studios and other situations demanding high sound quality.

Supports only linear PCM.

6 MIDI OUT

MIDI signals can be output to allow MIDI control of external devices.

7 Digital link function

Multiple functions can be performed by using digital link cables to connect other PIONEER DJ CD players, DJ effectors and AV mixers.

8 Other features

÷By using a control cable to connect the unit to a PIONEER DJuse CD player, playback can be started on the CD player in automatic linkage to operation of the fader (“fader start play”).

÷Built-in “3-band equalizer” enabling level control within range +6 dB to –26 dB at each bandwidth.

÷Features “2-band booth EQ” for control of booth monitor response, thus facilitating booth monitoring by the DJ.

÷Built-in “cross fader assign” function, enabling more flexible assigning of each channel’s input to the cross fader.

÷Built-in “TALK OVER function” automatically lowers track volume during MIC-input.

CONTENTS

 

FEATURES ...................................................................

3

CONFIRM ACCESSORIES ...........................................

3

CAUTIONS REGARDING HANDLING ........................

4

BEFORE USING

 

CONNECTIONS............................................................

5

CONNECTION PANEL ...........................................

5

POWER CORD CONNECTION ...............................

6

CONNECTING TO THE INPUT CONNECTORS ...

6

CONNECTING TO THE EFFECTOR AND

 

OUTPUT CONNECTORS .......................................

7

MIDI CONNECTORS ..............................................

7

CONNECTING MICROPHONES, HEADPHONES ...

8

DIGITAL LINK CONNECTIONS .............................

8

PART NAMES AND FUNCTIONS ...............................

9

OPERATIONS

 

OPERATIONS .............................................................

13

BASIC OPERATIONS ...........................................

13

FADER CURVE ADJUSTMENTS .........................

13

FADER START FUNCTION ..................................

14

USING EXTERNAL EFFECTORS .........................

14

DIGITAL LINK FUNCTION ...................................

15

OTHER

 

TROUBLESHOOTING ................................................

16

SPECIFICATIONS .......................................................

17

BLOCK DIAGRAM ......................................................

18

CONFIRM ACCESSORIES

Operating Instructions...........................................................

1

Power cord .............................................................................

1

Warranty .................................................................................

1

3

CAUTIONS REGARDING HANDLING

Location

Install the unit in a well-ventilated location where it will not be exposed to high temperatures or humidity.

÷Do not install the unit in a location which is exposed to direct rays of the sun, or near stoves or radiators. Excessive heat can adversely affect the cabinet and internal components. Installation of the unit in a damp or dusty environment may also result in a malfunction or accident. (Avoid installation near cookers etc., where the unit may be exposed to oily smoke, steam or heat.)

÷When the unit is used inside a carrying case or DJ booth, separate it from the walls or other equipment to improve heat radiation.

Installing the DJM-1000 in an EIA rack

The screw holes on the front panel of the DJM-1000 are designed for use in attaching the unit to a 19-inch EIA rack.

÷Attach the unit to the rack using screws of the appropriate size (screws not provided with the unit).

÷When installing the unit in a rack, take care to avoid pinching your fingers.

Note

÷Never place this unit directly above a power amplifier, as the heat given off by the amplifier might result in damage to the unit. Placing the unit directly above a power amplifier might also result in ham radio signals being picked up or in other types of interference.

÷Allow at least 1U (43.7 mm) space between this component and the one mounted above it, so as to assure that the cords connected to this unit’s input/output connectors and terminals do not touch the component above.

÷Always be sure to remove the unit from its rack before shipping.

÷When moving the unit while still installed in its rack, exercise caution to avoid subjecting the unit to shocks or vibration.

Condensation

When this unit is brought into a warm room from previously cold surroundings or when the room temperature rises sharply, condensation may form inside, and the unit may not be able to attain its full performance. In cases like this, allow the unit to stand for about an hour or raise the room temperature gradually.

Cleaning the Unit

÷Use a polishing cloth to wipe off dust and dirt.

÷When the surfaces are very dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water and wrung out well, then wipe again with a dry cloth. Do not use furniture wax or cleaners.

÷Never use thinners, benzene, insecticide sprays or other chemicals on or near this unit, since these will corrode the surfaces.

4

BEFORE USING (CONNECTIONS)

CONNECTIONS

CONNECTION PANEL

1

2

3

 

 

4

5

6

7

 

 

8

 

 

 

 

 

 

 

 

9

 

 

10

 

 

OUTPUT

 

 

 

 

 

 

INPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3COLD MASTER ATT.

 

 

SIGNAL GND.

 

 

SIGNAL GND.

 

 

SIGNAL GND.

 

 

 

 

 

 

 

2

 

1

0dB

 

6

 

 

5

 

4

 

3

 

2

 

1

2

SEND

 

1

 

 

 

HOT

 

GND

–3dB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

–6dB

 

 

 

 

 

 

 

 

 

 

 

 

POWER

 

 

 

–12dB

PHONO CD / LINE

PHONO

CD / LINE

PHONO

CD / LINE

PHONO CD / LINE

PHONO

CD / LINE

PHONO

CD / LINE

 

 

 

L

MIDI OUT

 

 

MASTER 2

REC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(MONO)

OFF

ON

 

 

 

 

 

L

 

 

L

 

L

 

L

 

L

 

L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R

 

 

L

 

 

 

 

 

R

 

 

R

 

R

 

R

 

R

 

R

 

 

 

 

 

 

 

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MASTER

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L

 

L

 

L

 

L

 

 

 

 

L

 

 

 

 

 

 

L

 

 

 

 

 

 

 

 

 

 

 

 

(MONO)

 

 

 

 

 

 

 

 

 

 

 

(MONO)

 

(MONO)

 

(MONO)

 

(MONO)

 

 

 

 

 

VISUAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BOOTH

 

 

 

 

 

LINE

 

LINE

 

LINE

 

LINE

 

 

 

 

 

 

 

 

 

 

 

(TRS)

 

SUBMIC

 

SUBMIC

 

 

 

 

 

 

 

 

 

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R

 

 

 

 

 

R

 

 

 

 

 

R

 

R

 

R

 

R

 

 

 

 

 

AC IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

RETURN

1

 

 

DIGITAL OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONTROL

DIGITAL

 

CONTROL

DIGITAL

CONTROL

DIGITAL

CONTROL

DIGITAL

CONTROL

SOUND 2

CONTROL

SOUND 1

EFX 2

EFX 1

 

 

 

fs(Hz)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

48k

 

96k

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

22

21

20

19

18

17

16

1.POWER switch

2.MASTER output connector 1 (MASTER 1)

XLR type balanced output (male connector).

3. MASTER output connector 2 (MASTER 2)

RCA type unbalanced output.

4. MASTER output attenuator dial (MASTER ATT.)

Attenuates the output level of MASTER 1 and MASTER 2 output.

The level of attenuation can be chosen from 0 dB, –3 dB, –6 dB,

–12 dB.

5. Recording output connectors (REC)

RCA type output connector for recording.

6. PHONO input connectors

RCA type phono level (for MM cartridge) input connectors. Do not use for input of line level signals.

7. Signal grounding terminal (SIGNAL GND)

Use to connect grounding wire from analog player. Not a terminal for safety grounding.

8. CD/LINE input connectors

RCA type line level input connectors.

Use to connect DJ CD players and/or line level output devices.

15

14

13

12

11

13. EFX link input/output connectors (EFX 1, 2)

When a digital-link cable is used to connect the unit to a PIONEER

DJ effector supporting digital linkage (EFX-1000), SEND/RETURN connections are performed at once digitally, and functions such as fader effect are also enabled.

14. LINE input connectors

Ø6.3 mm phone type line level connectors.

When only the L channel is connected, the input to the L channel will also be input into the R channel.

15. CDJ link input connectors (SOUND 1, 2)

When a digital-link cable is used to connect the unit to a PIONEER DJ CD player supporting digital linkage, the digital audio connections and control cable connections are performed at once, and functions such as BPM synchro are also enabled.

16. DIGITAL input connectors

RCA type digital coaxial input connectors.

Connect to digital coaxial output connectors of DJ CD player, etc.

17. SUBMIC input connectors

Ø6.3 mm phone type microphone input connectors.

Utilizes the DJM-1000’s channels 5 and 6 as microphone input channels.

9. SEND output connectors (SEND 1, 2)

Ø6.3 mm phone type output connectors.

Use to connects input connectors from external effectors, etc.

When only the L channel is connected, a monaural signal of L+R is output.

18. CONTROL connectors

Ø3.5 mm mini phone-type input connector for connecting control cable to DJ CD player.

Allows use of the DJM-1000’s fader function to control start/stop of a connected DJ CD player.

10. MIDI output connector (MIDI OUT)

DIN type output connector.

Connects with other MIDI devices (P.7).

11. VISUAL link connector

When a digital link cable is used to connect the unit to a PIONEER video mixer (switcher) supporting digital-linkage, the video mixer’s cross fader can be controlled using the cross fader of the

DJM-1000.

19. BOOTH monitor output connectors

Ø 6.3 mm phone type output connectors for booth monitor.

Changes the volume with the BOOTH MONITOR dial (LEVEL), unaffected to the MASTER fader (since output is TRS, both balanced and unbalanced outputs are supported).

20. Digital output connector (DIGITAL OUT)

RCA type digital coaxial output connector.

Digital master output.

12. RETURN connectors (RETURN 1, 2)

Ø6.3 mm phone type output connectors.

Connect to input connectors of external effectors, etc.

When only the L channel is connected, the input in the L channel will be input into the R channel.

21. Sampling frequency selector switch (48k/96k)

Chooses the sampling frequency of the digital output (96 kHz or 48 kHz).

22. Power inlet connector (AC IN)

Connect to AC outlet plug with the provided power cord.

5

+ 15 hidden pages