Files for
Size:
4.86 Mb
Download

DJ MIXER

DJM-900SRT

DJM-900SRT Serato DJ Edition

http://pioneerdj.com/support/

The Pioneer DJ support site shown above offers FAQs, information on software and various other types of information and services to allow you to use your product in greater comfort.

http://rekordbox.com/

For various types of information and services regarding rekordbox™, see the Pioneer website above.

http://serato.com/

For the latest version of the Serato DJ software, access Serato.com and download the software from there.

Operating Instructions

Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.

In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However the method of connecting and operating the unit is the same.

IMPORTANT

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION:

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

D3-4-2-1-1_A1_En

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments/accessories specified by the manufacturer.

12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13)Unplug this apparatus during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

D3-7-13-69_En

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

D8-10-1-2_A1_En

FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Product Name: DJ MIXER

Model Number: DJM-900SRT

Responsible Party Name: PIONEER ELECTRONICS (USA) INC. SERVICE SUPPORT DIVISION

Address: 1925 E. DOMINGUEZ ST. LONG BEACH, CA 90810-1003, U.S.A. Phone: 1-800-421-1404

URL: http://www.pioneerelectronics.com

D8-10-4*_C1_En

2 En

D41-6-4_A1_En

WARNING

This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.

D3-4-2-1-3_A1_En

WARNING

This product equipped with a three-wire grounding (earthed) plug - a plug that has a third (grounding) pin. This plug only fits a grounding-type power outlet. If you are unable to insert the plug into an outlet, contact a licensed electrician to replace the outlet with a properly grounded one. Do not defeat the safety purpose of the grounding plug.

D3-4-2-1-6_A1_En

WARNING

To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment.

D3-4-2-1-7a_A1_En

VENTILATION CAUTION

When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 5 cm at rear, and 3 cm at each side).

WARNING

Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating. To prevent fire hazard, the openings should never be blocked or covered with items (such as newspapers, table-cloths, curtains) or by operating the equipment on thick carpet or a bed.

D3-4-2-1-7b*_A1_En

Operating Environment

Operating environment temperature and humidity: +5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH (cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light)

D3-4-2-1-7c*_A1_En

CAUTION

The POWER switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from the AC outlet in case of an accident. To avoid fire hazard, the power cord should also be unplugged from the AC outlet when left unused for a long period of time (for example, when on vacation).

D3-4-2-2-2a*_A1_En

IMPORTANT NOTICE

THE MODEL NUMBER AND SERIAL NUMBER OF THIS EQUIPMENT ARE ON THE RIGHT SIDE. RECORD THESE NUMBERS ON PAGE 31 FOR FUTURE REFERENCE.

D36-AP9-3*_A1_En

WARNING

Store small parts out of the reach of children and infants. If accidentally swallowed, contact a doctor immediately.

WARNING: Handling the cord on this product or cords associated with accessories sold with the product may expose you to chemicals listed on proposition 65 known to the State of California and other governmental entities to cause cancer and birth defect or other reproductive harm.

D36-P5_B1_En

Information to User

Alterations or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.

D8-10-2_A1_En

CAUTION

This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.

D8-10-3a_A1_En

The Safety of Your Ears is in Your Hands

Get the most out of your equipment by playing it at a safe level – a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.

ESTABLISH A SAFE LEVEL:

Set your volume control at a low setting.

Slowly increase the sound until you can hear it comfortably and clearly, without distortion.

Once you have established a comfortable sound level, set the dial and leave it there.

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:

Do not turn up the volume so high that you can’t hear what’s around you.

Use caution or temporarily discontinue use in potentially hazardous situations.

Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas.

S001a_A1_En

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement.

S002*_A1_En

En 3

Contents

For those operating Serato DJ for the first time using this unit and its accessories

See the “Quick Start Guide - Serato DJ Edition” for the procedure for making the initial settings required to use the CONTROL CD or CONTROL VINYL included with this unit in order to operate Serato DJ. The “Quick Start Guide - Serato DJ Edition” can be downloaded from the Pioneer DJ support site (http://pioneerdj.com/support/). For downloading instructions, see Downloading the latest versions of the operating instructions and the Quick Start Guide - Serato DJ Edition in this manual (p.28).

How to read this manual

Be sure to read both this manual and the “Quick Start Guide – Serato DJ Edition”. Both contain important information that you should understand before using this product.

For instructions on obtaining the Serato DJ software’s manual, see Acquiring the manual (p.28).

This manual consists mainly of descriptions of the functions of this unit as hardware. For details about operating the Serato DJ software, see the Serato DJ software’s manual and the “Quick Start Guide – Serato DJ Edition”.

!The Serato DJ software manual can be downloaded from “Serato.com”. For details, see Downloading the Serato DJ software manual (p. 28).

!The latest version of the operating instructions (this manual) and the “Quick Start Guide – Serato DJ Edition” can be downloaded from the Pioneer support site. For details, see Downloading the latest versions of the operating instructions and the Quick Start Guide - Serato DJ Edition (p.28).

!In this manual, names of channels and buttons indicated on the product, names of menus in the software, etc., are indicated within square brackets ([ ]). (e.g. [MASTER] channel, [ON/OFF], [File] menu)

!Please note that the screens and specifications of the software described in this manual as well as the external appearance and specifications of the hardware are currently under development and may differ from the final specifications.

!Please note that depending on the operating system version, web browser settings, etc., operation may differ from the procedures described in this manual.

 

Before start

 

 

Features..............................................................................................................................

5

 

What’s in the box...............................................................................................................

5

 

Installing the software

 

 

Installing the driver software............................................................................................

6

 

Installing the Serato DJ software.....................................................................................

7

 

Connections

 

 

Rear panel........................................................................................................................

10

 

Connecting input terminals...........................................................................................

11

 

Connecting output terminals.........................................................................................

11

 

Connecting to the control panel....................................................................................

12

 

Connecting this unit and computer..............................................................................

12

 

Operation

 

 

Control Panel...................................................................................................................

13

 

Basic Operation...............................................................................................................

14

 

Advanced Operations.....................................................................................................

15

 

Types of effects

 

 

Types of SOUND COLOR FX effects..............................................................................

19

 

Types of BEAT EFFECT....................................................................................................

19

 

MIDI assignment map

 

 

MIDI assignment map....................................................................................................

22

 

Changing the settings

 

 

About the auto standby function...................................................................................

24

 

About the talk over function...........................................................................................

24

 

Setting preferences.........................................................................................................

24

 

About the setting utility software...................................................................................

24

 

Checking the latest information on the driver software..............................................

25

 

Additional information

 

 

Troubleshooting...............................................................................................................

26

 

Block Diagram.................................................................................................................

27

 

Acquiring the manual.....................................................................................................

28

 

About trademarks and registered trademarks.............................................................

28

 

Specifications..................................................................................................................

29

4

En

 

Before start

Features

This unit is a 4-channel mixer optimally designed for DJ performances using the “Serato DJ” DJ software by Serato. It is equipped with an internal sound card that is compatible with Serato DJ, so performances using Serato DJ can be held immediately after connecting this unit with a computer using a USB cable, with no need to make any troublesome settings.

Furthermore, Serato DJ’s scratch function can be controlled using the included CONTROL VINYL (record) or CONTROL CD.

In addition, this unit carries over the main functions, quality and performance of the Pioneer DJM-900nexus, a standard model in clubs throughout the world, offering powerful support for performances by all professional DJs active in the club scene.

PLUG AND PLAY

This unit is equipped with a built-in USB sound card for connecting a computer. A computer can be connected simply using a single USB cable; there is no need to procure a separate sound card in addition to this unit.

Also, when Serato DJ is launched, this unit is automatically selected as the sound device, so DJ performances using Serato DJ can be held immediately, with no need to make any troublesome settings.

Furthermore, Serato DJ’s scratch function can be controlled using the included CONTROL VINYL (record) or CONTROL CD.

HIGH SOUND QUALITY

This unit uses a 32-bit D/A converter and other parts that are equivalent to those of high grade audio equipment, greatly improving the sound quality of not only the

master output but also the headphones and booth output. The use of a 32-bit digital signal processor suppresses digital noise. Furthermore, for the analog circuitry as well, a high sound quality balanced hybrid operational amplifier and a fully balanced output circuitry are used to reduce noise.

SOUND COLOR FX&BEAT FX

This unit is equipped with the SOUND COLOR FX and BEAT FX functions that have been well received on the DJM series. With SOUND COLOR FX, the effects you are aiming to create can be applied simply by turning the knob, letting you make original arrangements of tracks and enabling a wide variety of remixing possibili-

ties. Also, the BPM and beat position information of the track currently playing with Serato DJ can be obtained via USB, so BEAT EFFECT can be applied on beat thanks to the highly precise BPM information. Also, by using the quantize mode, the effect timing is automatically corrected even if the BEAT EFFECT operation is performed off timing, so effects can be applied in beat.

DURABLE FADER

The crossfader and channel faders use a sliding structure in which the fader knobs are supported by two metal shafts. This provides both smooth operation with no wobbling and high durability. It also keeps any adverse effects from liquids or dust getting into the faders to a minimum. For scratch play compatibility, the crossfader uses a uniquely developed magnetic system that provides a high durability of over 10 million operations with subtle operability. The channel faders provide approximately three times greater operation durability as compared to a previous Pioneer model (DJM-800).

STANDARD LAYOUT

This unit carries over the control panel layout of the Pioneer DJM series, the world standard in DJ mixers.

The simple, straightforward control panel layout not only facilitates DJ performances but lets even DJs using this unit for the first time to operate it without hesitation, so it can be used without worry as a mixer that is permanently installed in the club.

What’s in the box

!CD-ROM (Installation Disc)

!USB cable

!Power cord

!Operating instructions (this document)

!Serato DJ CONTROL CD × 2

!Serato DJ CONTROL VINYL × 2

start Before

En 5

Installing the software

Installing the driver software

This driver software is a proprietary program for inputting and outputting audio signals from the computer. To use this unit connected to a computer on which a Windows or Mac OS is installed, install the driver software on the computer beforehand.

Software end user license agreement

This Software End User License Agreement (“Agreement”) is between you (both the individual installing the Program and any single legal entity for which the individual is acting) (“You” or “Your”) and PIONEER CORPORATION (“Pioneer”).

TAKING ANY STEP TO SET UP OR INSTALL THE PROGRAM MEANS THAT YOU ACCEPT ALL OF THE TERMS OF THIS LICENSE AGREEMENT. PERMISSION TO DOWNLOAD AND/OR USE THE PROGRAM IS EXPRESSLY CONDITIONED ON YOUR FOLLOWING THESE TERMS. WRITTEN OR ELECTRONIC APPROVAL IS NOT REQUIRED TO MAKE THIS AGREEMENT VALID AND ENFORCEABLE. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, YOU ARE NOT AUTHORIZED TO USE THE PROGRAM AND MUST STOP INSTALLING IT OR UNINSTALL IT, AS APPLICABLE.

5 U.S. GOVERNMENT RESTRICTED RIGHTS

The Program and Documentations are “commercial computer software” and “commercial computer software documentation” as those terms are defined in 48 C.F.R. §252.227-7014 (a) (1) (2007) and 252.227-7014 (a) (5) (2007). The U.S. Government’s rights with respect to the Program and Documentations are limited by this license pursuant to 48 C.F.R. § 12.212 (Computer software) (1995) and 48 C.F.R. §12.211 (Technical data) (1995) and/or 48 C.F.R. §227.7202-3, as applicable. As such, the Program and Documentations are being licensed to the U.S. Government end users:

(a) only as “commercial items” as that term is defined in 48 C.F.R. §2.101 generally and as incorporated in DFAR 212.102; and (b) with only those limited rights as are granted to the public pursuant to this license. Under no circumstance will the U.S. Government or its end users be granted any greater rights than we grant to other users, as provided for in this license. Manufacturer is Pioneer Corporation, 1-1 ShinOgura, Saiwai-ku, Kawasaki-shi, Kanagawa-Ken, 212-0031 Japan

6 DAMAGES AND REMEDIES FOR BREACH

You agree that any breach of this Agreement’s restrictions would cause Pioneer irreparable harm for which money damages alone would be inadequate. In addition to damages and any other remedies to which Pioneer may be entitled, You agree that Pioneer may seek injunctive relief to prevent the actual, threatened or continued breach of this Agreement.

1DEFINITIONS

1“Documentation” means written documentation, specifications and help content made generally available by Pioneer to aid in installing and using the Program.

2“Program” means all or any part of Pioneer’s software licensed to You by Pioneer under this Agreement.

2PROGRAM LICENSE

1Limited License. Subject to this Agreement’s restrictions, Pioneer grants to You a limited, non-exclusive, non-transferable, license (without the right to sublicense):

a To install a single copy of the Program in Your computer or mobile device, to use the Program only for Your personal purpose complying with this Agreement and the Documentation (“Authorized Use”);

b To use the Documentation in support of Your Authorized Use; and

c To make one copy of the Program solely for backup purposes, provided that all titles and trademark, copyright and restricted rights notices are reproduced on the copy.

2Restrictions. You will not copy or use the Program or Documentation except as expressly permitted by this Agreement. You will not transfer, sublicense, rent, lease or lend the Program, or use it for third-party training, commercial time-sharing or service bureau use. You will not Yourself or through any third party modify, reverse engineer, disassemble or decompile the Program, except to the extent expressly permitted by applicable law, and then only after You have notified Pioneer in writing of Your intended activities.

3Ownership. Pioneer or its licensor retains all right, title and interest in and to all patent, copyright, trademark, trade secret and other intellectual property rights in the Program and Documentation, and any derivative works thereof. You do not acquire any other rights, express or implied, beyond the limited license set forth in this Agreement.

4No Support. Pioneer has no obligation to provide support, maintenance, upgrades, modifications or new releases for the Program or Documentation under this Agreement.

3WARRANTY DISCLAIMER

THE PROGRAM AND DOCUMENTATION ARE PROVIDED “AS IS” WITHOUT ANY REPRESENTATIONS OR WARRANTIES, AND YOU AGREE TO USE THEM AT YOUR SOLE RISK. TO THE FULLEST EXTENT PERMISSIBLE BY LAW, PIONEER EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY KIND WITH RESPECT TO THE PROGRAM AND DOCUMENTATION, WHETHER EXPRESS, IMPLIED, STATUTORY, OR ARISING OUT OF COURSE OF PERFORMANCE, COURSE OF DEALING OR USAGE OF TRADE, INCLUDING ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, ACCURACY, TITLE OR NON-INFRINGEMENT.

4 EXPORT CONTROL AND COMPLIANCE WITH LAWS AND REGULATIONS

You may not use or otherwise export or re-export the Program except as authorized by United States law and the laws of the jurisdiction in which the Program was obtained. In particular, but without limitation, the Program may not be exported or re-exported (a) into any U.S.-embargoed countries or (b) to anyone on the U.S. Treasury Department's Specially Designated Nationals List or the U.S. Department of Commerce Denied Persons List or Entity List. By using the Program, you represent and warrant that you are not located in any such country or on any such list. You also agree that you will not use the Program for any purposes prohibited by

United States law, including, without limitation, the development, design, manufacture, or production of nuclear, missile, or chemical or biological weapons.

6 En

7 TERMINATION

Pioneer may terminate this Agreement at any time upon Your breach of any provision. If this Agreement is terminated, You will stop using the Program, permanently delete it from your computer or mobile device where it resides, and destroy all copies of the Program and Documentation in Your possession, confirming to Pioneer in writing that You have done so. Sections 2.2, 2.3, 2.4, 3, 4, 5, 6, 7 and 8 will continue in effect after this Agreement’s termination.

8GENERAL TERMS

1Limitation of Liability. In no event will Pioneer or its subsidiaries be liable in connection with this Agreement or its subject matter, under any theory of liability, for any indirect, incidental, special, consequential or punitive

damages, or damages for lost profits, revenue, business, savings, data, use, or cost of substitute procurement, even if advised of the possibility of such damages or if such damages are foreseeable. In no event will Pioneer’s liability for all damages exceed the amounts actually paid by You to Pioneer or its subsidiaries for the Program. The parties acknowledge that the liability limits and risk allocation in this Agreement are reflected in the Program price and are essential elements of the bargain between the parties, without which Pioneer would not have provided the Program or entered into this Agreement.

2The limitations or exclusions of warranties and liability contained in this Agreement do not affect or prejudice Your statutory rights as consumer and shall apply to You only to the extent such limitations or exclusions are permitted under the laws of the jurisdiction where You are located.

3Severability and Waiver. If any provision of this Agreement is held to be illegal, invalid or otherwise unenforceable, that provision will be enforced to the extent possible or, if incapable of enforcement, deemed to be severed and deleted from this Agreement, and the remainder will continue in full force and effect. The waiver by either party of any default or breach of this Agreement will not waive any other or subsequent default or breach.

4No Assignment. You may not assign, sell, transfer, delegate or otherwise dispose of this Agreement or any rights or obligations under it, whether voluntarily or involuntarily, by operation of law or otherwise, without Pioneer’s prior written consent. Any purported assignment, transfer or delegation by You will be null and void. Subject to the foregoing, this Agreement will be binding upon and will inure to the benefit of the parties and their respective successors and assigns.

5Entire Agreement. This Agreement constitutes the entire agreement between the parties and supersedes all prior or contemporaneous agreements or representations, whether written or oral, concerning its subject matter. This Agreement may not be modified or amended without Pioneer’s prior and express written consent, and no other act, document, usage or custom will be deemed to amend or modify this Agreement.

6You agree that this Agreement shall be governed and construed by and under the laws of Japan.

Cautions on Installation

!Before installing the driver software, be sure to turn off the power of this unit and disconnect the USB cable from both this unit and your computer.

!If you connect this unit to your computer without installing the driver software first, an error may occur on your computer depending on the system environment.

!If you have discontinued the installation process in progress, step through the installation process again from the beginning according to the following procedure.

!Read Software end user license agreement carefully before installing this unit’s proprietary driver software.

!Before installing the driver software, terminate all other programs running on your computer.

!The driver software is compatible with the following OSs.

Supported operating systems

Mac OS X 10.6 / 10.7 / 10.8

1

 

Windows® 8/Windows® 8 Pro

32-bit version

1

64-bit version

1

Windows® 7 Home Premium/Professional/Ultimate

32-bit version

1

64-bit version

1

 

Windows Vista® Home Basic/Home Premium/Business/Ultimate

32-bit version

1

64-bit version

1

 

Windows® XP Home Edition/Professional (SP3 or later)

32-bit version

1

Windows® XP Professional x64 Edition is not supported.

!The included CD-ROM includes installation programs in the following 12 languages.

English, French, German, Italian, Dutch, Spanish, Portuguese, Russian, Simplified Chinese, Traditional Chinese, Korean, and Japanese

When using operating systems in other languages, follow the instructions on the screen to select [English (English)].

Installation Procedure (Windows)

Read Cautions on Installation carefully before installing the driver software.

!To install or uninstall the driver software, you need to be authorized by the administrator of your computer. Log on as the administrator of your computer before proceeding with the installation.

1 Insert the included CD-ROM into the computer’s CD drive.

The CD-ROM menu is displayed.

!If the CD-ROM menu does not appear when the CD-ROM is inserted, doubleclick the CD drive from the [Start] menu – [Computer] (or [My Computer]).

2From the menu that appears, select [Install Driver Software], then click [Start].

3“Download the latest version? An internet environment is required to access the site.” is displayed. Click [Yes].

The web browser is launched and the Pioneer DJ support site is displayed.

4Click [Software Download] under [DJM-900SRT] on the Pioneer DJ support site.

5Click [Driver Software].

6From the download page, download the driver software for Windows (DJM-900SRT_X.XXX.exe).

7Double-click the downloaded file.

The driver installation screen appears.

8 Carefully read the Software end user license agreement and if you consent to the provisions, put a check mark in [I agree.] and click [OK].

If you do not consent to the provisions of the Software end user license agreement, click [Cancel] and stop installation.

9 Proceed with installation according to the instructions on the screen.

If [Windows Security] appears on the screen while the installation is in progress, click [Install this driver software anyway] and continue with the installation.

!When installing on Windows XP

If [Hardware Installation] appears on the screen while the installation is in progress, click [Continue Anyway] and continue with the installation.

!When the installation program is completed, a completion message appears.

Installation procedure (Mac OS X)

Read Cautions on Installation carefully before installing the driver software.

!To install or uninstall the driver software, you need to be authorized by the administrator of your computer. Have the name and password of the administrator of your computer ready in advance.

1 Insert the included CD-ROM into the computer’s CD drive.

The CD-ROM folder appears.

!Double-click the CD icon on the desktop when folders are not displayed after a CD-ROM has been loaded.

2 Double-click [CD_menu.app].

3From the menu that appears, select [Install Driver Software], then click [Start].

4“Download the latest version? An internet environment is required to access the site.” is displayed. Click [Yes].

The web browser is launched and the Pioneer DJ support site is displayed.

5Click [Software Download] under [DJM-900SRT] on the Pioneer DJ support site.

6Click [Driver Software].

7From the download page, download the driver software for Mac OS (DJM-900SRT_M_X.X.X.dmg).

8Double-click the downloaded file.

The [DJM-900SRT_AudioDriver] menu screen appears.

9 Double-click [DJM-900SRT_AudioDriver.pkg].

The driver installation screen appears.

10 Check the details on the screen and click [Continue Anyway].

11 When the end user license agreement appears, read

Software end user license agreement carefully, then click [Continue Anyway].

12 If you consent to the provisions of the Software end user license agreement, click [Agree].

If you do not consent to the provisions of the Software end user license agreement, click [I disagree] and stop installation.

13 Proceed with installation according to the instructions on the screen.

!Click [Cancel] to cancel installation after it has started.

Installing the Serato DJ software

Serato DJ is a DJ software application by Serato. DJ performances are possible by connecting the computer on which this software is installed to this unit.

See the “Quick Start Guide - Serato DJ Edition” for the procedure for making the initial settings required to use the CONTROL CD or CONTROL VINYL included with this unit in order to operate Serato DJ. The “Quick Start Guide - Serato DJ Edition” can be downloaded from the Pioneer DJ support site (http://pioneerdj.com/support/). For downloading instructions, see Downloading the latest versions of the operating instructions and the Quick Start Guide - Serato DJ Edition in this manual (p.28).

For the latest version of the Serato DJ software, access Serato.com and download the software from there. A software download link is also provided on the included CD-ROM.

Please note that the software screens and specifications used for explanations in this manual are under development and may differ from the final specifications. For instructions on operating the Serato DJ software, see the Serato DJ software’s manual.

!The Serato DJ software’s manual can be downloaded from “Serato.com”. For details, see Downloading the Serato DJ software manual (p.28).

Minimum operating environment

Supported operating systems

CPU and required memory

 

 

Intel® processor, Core™ 2 Duo 2.0 GHz or

 

32-bit version

better

Mac OS X: 10.6.8, 10.7.4 and 10.8

 

1 GB or more of RAM

 

Intel® processor, Core™ 2 Duo 2.4 GHz or

 

 

 

64-bit version

better

 

 

4 GB or more of RAM

 

 

Intel® processor, Core™ 2 Duo 2.0 GHz or

 

32-bit version

better

Windows: Windows 7

 

2 GB or more of RAM

 

Intel® processor, Core™ 2 Duo 2.4 GHz or

 

 

 

64-bit version

better

 

 

4 GB or more of RAM

Others

USB port

A USB 2.0 port is required to connect the computer with this unit.

Display resolution

Resolution of 1 280 x 720 or greater

Internet connection

An Internet connection is required for registering the “Serato.

com” user account and downloading the software.

 

!For the latest information on the required operating environment and compatibility as well as to acquire the latest operating system, refer to “Software Info” under “DJM-900SRT” on the Pioneer DJ support site below.

http://pioneerdj.com/support/

!Operation is not guaranteed on all computers, even if all the required operating environment conditions indicated here are fulfilled.

software the Installing

En 7

!Depending on the computer’s power-saving settings, etc., the CPU and hard disk may not provide sufficient processing capabilities. For notebook computers in particular, make sure the computer is in the proper conditions to provide constant high performance (for example by keeping the AC power connected) when using Serato DJ.

!Use of the Internet requires a separate contract with a provider offering Internet services and payment of provider fees.

Installation Procedure (Windows)

Do not connect this unit and the computer until installation is completed.

!Log on as the user which was set as the computer’s administrator before installing.

!If any other programs are running on the computer, quit them.

1 Insert the CD-ROM into the computer’s CD drive.

The CD-ROM menu is displayed.

!If the CD-ROM menu does not appear when the CD-ROM is inserted, open the CD drive from [Computer (or My Computer)] in the [Start] menu, then doubleclick the [CD_menu.exe] icon.

2 When the CD-ROM’s menu appears, select [Download Serato DJ Software.], then click [Start].

To close the CD-ROM menu, click [Exit].

3 “An internet environment is required to access the site. Connected to the internet?” is displayed. Click [Yes].

The web browser is launched and the Pioneer DJ support site is displayed.

4 Click [Software Info] under [DJM-900SRT] on the Pioneer DJ support site.

[Serato DJ Support Information] is displayed.

5 Click the link to the Serato DJ download page.

The Serato DJ download page is displayed.

6Log in to your “Serato.com” user account.

!If you have already registered a user account on “Serato.com”, proceed to step 8.

!If you have not completed registering your user account, do so following the procedure below.

Following the instructions on the screen, input your e-mail address and the password you want to set, then select the region in which you live.

If you check [E-mail me Serato newsletters], newsletters providing the latest information on Serato products will be sent from Serato.

Once user account registration is completed, you will receive an e-mail at the e-mail address you have input. Check the contents of the e-mail sent from “Serato.com”.

!Be careful not to forget the e-mail address and password specified when you performed user registration. They will be required for updating the software.

!The personal information input when registering a new user account may be collected, processed and used based on the privacy policy on the Serato website.

7Click the link in the e-mail message sent from “Serato.com”.

This takes you to the Serato DJ download page. Proceed to step 9.

8 Log in.

Input the e-mail address and password you have registered to log in to “Serato.com”.

9 Download the Serato DJ software from the download page.

Unzip the downloaded file, then double-click the unzipped file to launch the installer.

10 Read the terms of the license agreement carefully, and if you agree, select [I agree to the license terms and conditions], then click [Install].

!If you do not agree to the contents of the usage agreement, click [Close] to cancel installation.

Installation begins.

The message of successful installation appears once installation is completed.

11 Click [Close] to quit the Serato DJ installer.

Installation procedure (Mac OS X)

Do not connect this unit and the computer until installation is completed.

!If any other programs are running on the computer, quit them.

1 Insert the CD-ROM into the computer’s CD drive.

The CD-ROM menu is displayed.

!Double-click the CD icon on the desktop when folders are not displayed after a CD-ROM has been loaded.

2Double-click [CD_menu.app].

3Select [Download Serato DJ Software.] from the CD-ROM’s menu, then click [Start].

4“An internet environment is required to access the site. Connected to the internet?” is displayed. Click [Yes].

The web browser is launched and the Pioneer DJ support site is displayed.

5 Click [Software Info] under [DJM-900SRT] on the Pioneer DJ support site.

[Serato DJ Support Information] is displayed.

6 Click the link to the Serato DJ download page.

The Serato DJ download page is displayed.

7Log in to your “Serato.com” user account.

!If you have already registered a user account on “Serato.com”, proceed to step 8.

!If you have not completed registering your user account, do so following the procedure below.

Following the instructions on the screen, input your e-mail address and the password you want to set, then select the region in which you live.

If you check [E-mail me Serato newsletters], newsletters providing the latest information on Serato products will be sent from Serato.

Once user account registration is completed, you will receive an e-mail at the e-mail address you have input. Check the contents of the e-mail sent from “Serato.com”.

!Be careful not to forget the e-mail address and password specified when you performed user registration. They will be required for updating the software.

!The personal information input when registering a new user account may be collected, processed and used based on the privacy policy on the Serato website.

8Click the link in the e-mail message sent from “Serato.com”.

This takes you to the Serato DJ download page. Proceed to step 9.

9 Log in.

Input the e-mail address and password you have registered to log in to “Serato.com”.

10 Download the Serato DJ software from the download page.

Unzip the downloaded file, then double-click the unzipped file to launch the installer.

8 En

11 Read the terms of the license agreement carefully, and if you agree, click [Agree].

software the Installing

!If you do not agree to the contents of the usage agreement, click [Disagree] to cancel installation.

12 If the following screen appears, drag and drop the [Serato DJ] icon on the [Applications] folder icon.

En 9

Connections

Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.

Connect the power cord after all the connections between devices have been completed.

Be sure to use the included power cord.

Refer to the operating instructions for the component to be connected.

!When creating a DVS (Digital Vinyl System) combining a computer, audio interface, etc., be careful in connecting the audio interface to this unit’s input terminals and in the settings of the input selector switches.

Also refer to the operating instructions of the DJ software and audio interface.

Rear panel

 

1

 

2

3

45 3

4

3

 

45 3

4

6

7

8

 

 

 

 

CH 4

CH 3

CH 2

 

CH 1

 

 

 

 

 

 

 

PHONO

CD/LINE

PHONO

CD/LINE

PHONO

CD/LINE

PHONO

CD/LINE

 

 

 

 

 

 

RETURN

 

L

 

L

 

L

 

 

L

 

 

 

 

 

R

 

 

 

 

 

 

 

 

 

MIC2

MIDI OUT

 

OFF

POWER

L(MONO)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ON

 

 

 

 

SIGNAL GND

 

 

 

SIGNAL GND

 

 

 

 

 

 

 

 

 

R

 

R

 

R

 

 

R

 

 

 

 

 

 

SEND

 

MASTER1

 

MASTER2

REC OUT

 

BOOTH

 

 

CH

DIGITAL

CH1

 

 

 

 

R

L

L

L

 

TRS

 

 

 

 

 

R

L(MONO)

 

 

 

 

 

R

 

L

LINK

MASTER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OUT

 

IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AC IN

 

 

 

 

R

R

 

 

 

 

CH4

 

CH3

 

 

 

 

1GND

2 HOT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 COLD

 

 

 

 

 

 

 

 

 

h

g

f

e

d

c

b

a

9

1 POWER button (page 14)

 

 

 

C BOOTH terminals (page 11)

 

 

 

Turns this unit’s power on and off.

 

 

 

These are output terminals for a booth monitor.

 

2 RETURN terminals (page 11)

Connect to the output terminal of an external effector. When the [L (MONO)] channel only is connected, the [L (MONO)] channel input is simultaneously input to the [R] channel.

3 PHONO terminals (page 11)

Connect to a phono level (MM cartridge) output device. Do not input line level signals.

To connect a device to the [PHONO] terminals, remove the short-circuit pin plug inserted in the terminals.

Insert this short-circuit pin plug into the [PHONO] terminals when nothing is connected to them to cut external noise.

4 CD/LINE terminals (page 11)

Connect to a DJ player or a line level output component.

5 SIGNAL GND terminal (page 11)

Connects an analog player’s ground wire here. This helps reduce noise when the analog player is connected.

6 MIC2 terminal (page 11)

Connects a microphone here.

7 MIDI OUT terminal (page 11)

Connects this to the MIDI IN terminal on an external MIDI sequencer.

8Kensington security slot

9DIGITAL IN terminal (page 11)

Connect these to the digital coaxial output terminals on DJ players, etc. The sound may be momentarily interrupted when the output signal sampling frequency is switched.

A DIGITAL MASTER OUT terminal (page 11)

Outputs the master channel audio signals.

B LINK terminal (page 11)

Connect these to the LINK terminals on Pioneer DJ players or the LAN ports of computers on which rekordbox is installed (PRO DJ LINK).

To connect multiple devices, use a switching hub (commercially available). Use a 100Base-TX-compatible switching hub. Some switching hubs may not operate properly.

D REC OUT terminals (page 11)

These are output terminals for recording.

E MASTER2 terminals (page 11)

Connect to a power amplifier, etc.

F MASTER1 terminals (page 11)

Connect to a power amplifier, etc.

Be sure to use these as balanced outputs. Be careful not to accidentally insert the power cord of another unit.

G SEND terminals (page 11)

Connect to the input terminal of an external effector. When the [L (MONO)] channel only is connected, a monaural audio signal is output.

H AC IN

Connects to a power outlet using the included power cord. Wait until all connections between the equipment are completed before connecting the power cord. Be sure to use the included power cord.

WARNING

The short-circuit pin plugs out of the reach of children and infants. If accidentally swallowed, contact a doctor immediately.

10 En

3
L R

Connecting input terminals

!When creating a DVS (Digital Vinyl System) combining a computer, audio interface, etc., be careful in connecting the audio interface to this unit’s input terminals and in the settings of the input selector switches.

Also refer to the operating instructions of the DJ software and audio interface.

Analog player

L

R

Analog player

L

R

Analog player

L

R

Analog player

Microphones

 

 

Digital audio output device

L

R

Connections

 

 

 

 

CH 4

CH 3

CH 2

 

CH 1

 

 

 

 

 

PHONO CD/LINE

PHONO

CD/LINE

PHONO

CD/LINE

 

PHONO CD/LINE

 

 

 

 

RETURN

L

 

L

 

L

 

L

 

 

 

R

 

 

 

 

 

 

 

MIC2

MIDI OUT

OFF POWER

L(MONO)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ON

 

 

SIGNAL GND

 

 

SIGNAL GND

 

 

 

 

 

R

 

R

 

R

 

R

 

 

 

 

SEND

MASTER1

 

MASTER2

REC OUT

BOOTH

 

 

 

DIGITAL

 

 

R

L

L

L

TRS

 

 

CH

CH1

 

R

L

(MONO)

 

 

 

R

L

LINK

MASTER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OUT

IN

 

 

 

 

 

 

 

 

 

 

 

 

AC IN

 

 

 

R

R

 

 

 

CH4

CH3

 

 

1GND

2 HOT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 COLD

 

 

Switching hub

 

L R

L R

L R

L R

 

 

PRO DJ LINK 1

 

 

 

rekordbox

 

 

 

Computers

 

To power outlet

Pioneer DJ players

 

Pioneer DJ players 2

1For details on PRO DJ LINK, see About PRO DJ LINK on page 15.

2To use the fader start function with PRO DJ LINK, connect a LAN cable (page 16).

Connecting output terminals

 

 

 

CH 4

CH 3

CH 2

 

CH 1

 

 

 

 

 

PHONO CD/LINE

PHONO

CD/LINE

PHONO

CD/LINE

 

PHONO CD/LINE

 

 

 

 

RETURN

L

 

L

 

L

 

L

 

 

 

R

 

 

 

 

 

 

 

MIC2

MIDI OUT

OFF POWER

L(MONO)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ON

 

 

SIGNAL GND

 

 

SIGNAL GND

 

 

 

 

 

R

 

R

 

R

 

R

 

 

 

 

SEND

MASTER1

 

MASTER2

REC OUT

BOOTH

 

 

 

DIGITAL

 

 

R

L

L

L

TRS

 

 

CH2

CH1

 

R

L

(MONO)

 

 

 

R

L

LINK

MASTER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OUT

IN

 

 

 

 

 

 

 

 

 

 

 

 

AC IN

 

 

 

R

R

 

 

 

CH4

CH3

 

 

1GND

2 HOT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3 COLD

L R

To power outlet

Power amplifier 2 Power amplifier 2

Cassette deck, etc.

Power amplifier

Digital audio

 

External effector 1

(analog input recording device) (for booth monitor)

input device

MIDI sequencer

1Also connect the external effector to the [RETURN] terminal (input terminal).

2Be sure to use the [MASTER1] terminals only for a balanced output. Connection with an unbalanced input (such as RCA) using an XLR to RCA converter cable (or converter adapter), etc., may lower the sound quality and/or result in noise.

For connection with an unbalanced input (such as RCA), use the [MASTER2] terminals.

3Be careful not to accidentally insert the power cord of another unit to [MASTER1] terminal.

En 11

Connecting to the control panel

Computers

Be sure to connect using the

included USB cable.

 

Microphones

MIC

USB

 

 

 

MIC1

CD/ LINE PHO

 

 

DIGITAL

1

 

 

 

TRIM

2

 

 

 

 

 

 

 

3

 

 

OVER

 

 

 

 

 

MIC 1

 

 

10

 

 

 

7

 

 

 

 

 

 

0

LEVEL

4

HI

MIC 2

 

 

2

 

 

0

 

1

 

 

 

 

 

MIXING

 

 

 

CUE

MASTER

 

 

 

LEVEL

 

 

 

 

 

 

A

THRU

Headphones

0

 

 

 

PHONES

 

 

 

4

 

 

 

 

1 MIC1 terminal (page 15)

Connects a microphone here.

2 USB terminal (page 12)

Connect the computer.

3 USB connection indicator

Lights when signals are being exchanged with the computer.

4 PHONES terminal (page 14)

Connect headphones here.

Connecting this unit and computer

For instructions on operating in combination with Serato DJ, see the “Quick Start Guide – Serato DJ Edition”. For details, see Downloading the latest versions of the operating instructions and the Quick Start Guide - Serato DJ Edition (p.28).

1 Connect this unit to your computer via a USB cable.

This unit functions as an audio device conforming to the ASIO standards.

!This operation does not work with computers that do not support USB 2.0.

!When using ASIO-compatible applications, [USB DECK 3], [USB DECK 1], [USB DECK 2] and [USB DECK 4] can be used as inputs.

!When using DirectX-compatible applications, only [USB DECK 3] can be used as the input.

!The computer’s recommended operating environment depends on the DJ application. Be sure to check the recommended operating environment for the DJ application you are using.

!When another USB audio device is connected to the computer at the same time, it may not operate or be recognized normally.

We recommend only connecting the computer and this unit.

!When connecting the computer and this unit, we recommend connecting directly to this unit’s USB port.

2 Press [POWER] button.

Turn on the power of this unit.

!For Windows

The message [Installing device driver software] may appear when this unit is first connected to the computer or when it is connected to a different USB port on the computer. Wait a while until the message [Your devices are ready for use] appears.

!When installing on Windows XP

[Can Windows connect to Windows Update to search for software?] may appear while the installation is in progress. Select [No, not this time], then click [Next] to continue installation.

[What do you want the wizard to do?] may appear while the installation is in progress. Select [Install the software automatically (Recommended)], then click [Next] to continue installation.

If [Windows Security] appears on the screen while the installation is in progress, click [Install this driver software anyway] and continue with the installation.

12 En

Operation

Control Panel

1

2

3

4

5

6

7

8

9

a

MIC USB

MIC1

MIC 1

 

0

LEVEL

MIC 2

0

HI

 

12

12 EQ

LOW

12 12

TALK OFF ON OVER

SPACE

 

DUB

GATE/

 

ECHO

COMP

 

 

SOUND COLOR FX

NOISE

 

CRUSH

FILTER

 

 

LINK

 

 

 

CUE

 

 

FADER START

 

1

2

3

4

HEADPHONES

MONO SPLIT STEREO

MIXING

CUE MASTER

LEVEL

0

PHONES

POWER

b

CD/ LINE PHONO

DIGITAL

USB

 

 

DECK 3

 

 

 

c

 

TRIM

 

 

OVER

 

d

10

 

 

 

 

e

7

 

9

4

HI

 

 

2

 

 

 

1

 

 

 

0

-26 /

 

 

- 1

6

 

 

MID

 

 

- 2

 

 

 

- 3

 

 

EQ/

- 5

 

 

ISO

 

 

 

- 7 -26 /

6

 

-10

LOW

 

 

 

 

 

-15

 

 

 

-24

 

 

dB-26 /

6

f

 

 

 

 

COLOR

 

 

 

 

 

g

 

LOW

HI

 

 

CUE

 

6

 

 

b

 

 

b

CD/ LINE PHONO

CD/ LINE PHONO

DIGITAL

 

USB

DIGITAL

 

USB

 

 

 

 

 

DECK 1

 

DECK 2

 

 

c

 

 

c

 

TRIM

 

 

TRIM

 

OVER

 

d

OVER

 

d

10

9

e

10

9

e

7

 

7

 

4

HI

 

4

HI

 

2

 

 

2

 

 

1

 

 

1

 

 

0

 

 

0

 

 

- 1 -26 /

6

 

- 1 -26 /

6

 

 

MID

 

 

MID

 

- 2

 

 

- 2

 

 

- 3

 

EQ/

- 3

 

EQ/

- 5

 

ISO

- 5

 

ISO

 

 

 

 

- 7 -26 /

6

 

- 7 -26 /

6

 

-10

LOW

 

-10

LOW

 

 

 

 

 

-15

 

 

-15

 

 

-24

 

 

-24

 

 

dB-26 /

6

f

dB-26 /

6

f

 

 

 

 

COLOR

 

COLOR

 

 

g

 

g

LOW

HI

LOW

HI

 

b

 

MASTER

MIDI

 

 

 

 

ON/ OFF

START

LFO FORM

CD/ LINE PHONO

 

/STOP

 

LEVEL

 

 

DIGITAL

USB

 

 

 

 

 

k

 

 

 

 

DECK 4

UTILITY

 

WAKE UP

 

c

 

BEAT EFFECTS

TRIM l

0

 

OVER

 

 

d

 

OVER

 

 

CH SELECT

 

10

 

 

 

 

10

 

1

2

3

4

 

 

 

e

 

 

 

A

B

 

7

 

 

9

 

7

 

MIC

MST

 

 

 

 

 

PARAMETER

 

4

 

 

HI

 

 

4

 

AUTO

 

 

GRID

 

 

 

 

 

 

 

 

TAP

 

 

BPM

2

 

 

 

 

 

2

 

 

 

 

%

 

 

 

 

 

 

 

 

 

 

 

ms

1

 

 

 

 

 

1

 

 

 

 

 

0

-26 /

 

 

 

0

 

 

 

 

 

- 1

6

 

 

- 1

 

 

 

 

 

 

 

 

MID

 

 

 

 

 

X- PAD

 

- 2

 

 

 

 

 

- 2

 

 

 

 

 

 

 

 

 

 

 

 

 

- 3

 

 

 

EQ/

 

- 3

 

 

 

 

 

- 5

 

 

 

ISO

 

- 5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- 7 -26 /

6

 

 

- 7

 

 

 

 

 

-10

 

 

LOW

 

 

-10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-15

 

 

 

 

 

-15

 

 

BEAT

 

-24

 

 

 

 

-24

 

 

 

 

 

dB

-26

/

6

 

L

dB

R

AUTO

 

 

QUAN-

 

f

 

 

 

/ TAP

TAP

TIZE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COLOR

 

BALANCE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

g m

 

 

 

 

CUE

 

 

LOW

HI

 

L

 

R

 

 

 

 

 

 

 

FLANGER PHASER

CUE 6

CUE 6

CUE 6 6 CUE

FILTER

ROBOT

TRANS

MELODIC

 

 

 

REVERB

SLIP ROLL

 

 

 

 

SPIRAL

ROLL

 

 

 

MONO STEREO

ECHO

REV ROLL

 

 

 

 

DELAY

MIDI LFO

 

 

 

n

 

SND/ RTN

 

 

 

3

4 MIC

 

 

 

 

CF.A

10

10

10

 

2

CF.B

9

9

9

BOOTH MONITOR

1

MASTER

8

8

8

 

 

 

 

7

7

7

o

 

6

6

6

TIME

5

5

5

 

4

4

4

 

0

3

3

3

 

 

 

2

2

2

 

EQ CURVE

1

1

1

 

 

ISOLATOR EQ

h0

h0

h0

h

 

 

 

 

p

 

 

 

 

LEVEL/DEPTH

A THRU B

A THRU B

A THRU B

A THRU B

CH FADER

 

i

i

i

i q

 

 

 

 

MIN MAX

CROSS FADER ASSIGN

CROSS FADER

ON/ OFF

 

 

 

r

A B j

s t

u

v

w

x

y

z

A 6

B

C

D

E

F

Operation

1 MIC1 LEVEL control (page 15)

Adjusts the sound level output from the [MIC1] channel.

2 MIC2 LEVEL control (page 15)

Adjusts the sound level output from the [MIC2] channel.

3 EQ (HI, LOW) controls (page 15)

These adjust the tone quality of the [MIC1] and [MIC2] channels.

4 OFF, ON, TALK OVER selector switch (page 15)

Turns the microphone on/off.

5 SOUND COLOR FX buttons (page 16)

These turn the SOUND COLOR FX effects on/off.

6 CUE button (page 14)

Presses the [CUE] button(s) for the channel(s) you want to monitor.

7 FADER START (1, 2, 3, 4) buttons (page 16)

These turn the fader start function on/off.

8 MONO SPLIT, STEREO selector switch (page 14)

Switches how the monitor sound output from the headphones is distributed.

9 MIXING control (page 14)

This adjusts the monitor volume balance of the sound of channels for which the [CUE] button is pressed and the sound of the [MASTER] channel.

A LEVEL control (page 14)

Adjusts the sound level output from the headphones.

B USB audio input indicator

Lights when sound is being input from the computer to the various channels.

C Input selector switches (page 14)

Selects the input source of each channel from the components connected to this unit.

D TRIM control (page 14)

Adjusts the level of audio signals input in each channel.

E EQ/ISO (HI, MID, LOW) controls (page 14)

These adjust the sound quality of the respective channels.

F Channel Level Indicator (page 14)

Displays the sound level of the respective channels before passing through the channel faders.

En 13

G COLOR control (page 16)

This changes the parameters of the SOUND COLOR FX of the different channels.

H Channel Fader (page 14)

Adjusts the level of audio signals output in each channel.

I CROSS FADER ASSIGN (A, THRU, B) selector switch (page 14)

Sets the output destination of each channel to [A] or [B].

J Crossfader (page 14)

Outputs audio signals assigned by the crossfader assign switch corresponding to the curve characteristics selected by [CROSS FADER] (Crossfader Curve Selector Switch).

K MASTER LEVEL control (page 14)

Adjusts the audio level output from the [MASTER1] and [MASTER2] terminals.

L Master Level Indicator (page 14)

Displays the audio level output from the [MASTER1] and [MASTER2] terminals.

M BALANCE control (page 15)

Adjusts the left/right balance of the sound output from the [MASTER1] terminals, etc.

N MONO, STEREO selector switch (page 15)

Switches the sound output from the [MASTER1] terminals, etc., between monaural and stereo.

O BOOTH MONITOR control (page 15)

Adjusts the level of audio signals output from the [BOOTH] terminal.

P EQ CURVE (ISOLATOR, EQ) selector switch (page 14)

Switches the function of the [EQ/ISO (HI, MID, LOW)] controls.

Q CH FADER (, , ) selector switch (page 15)

Switches the channel fader’s curve characteristics.

R CROSS FADER (, ,) selector switch (page 15)

This switches the crossfader curve characteristics.

SON/OFF (UTILITY) button

ON/OFF: Turns the MIDI function on/off (page 17).

UTILITY: Displays the [USER SETUP] or [CLUB SETUP] screen (page 24).

TSTART/STOP button (page 18)

Sends the MIDI start/MIDI stop signals.

ULFO FORM (WAKE UP) button

LFO FORM: When [MIDI LFO] is selected at BEAT EFFECT, the MIDI signal’s waveform switches each time the button is pressed (page 20).

WAKE UP: Cancels the auto standby mode.

VMain unit display

WX-PAD (page 17)

Adjusts the quantitative parameter of the BEAT EFFECT function.

X BEAT c, d buttons (page 16)

Set the beat fraction for synchronizing the effect sound.

YTAP (ENTER) button

TAP: When the BPM measurement mode is set to [TAP], the BPM is input manually by tapping the button with a finger (page 16).

ENTER: Used to change this unit’s settings (page 24).

ZQUANTIZE button

When the QUANTIZE function is turned on for BEAT EFFECT, the effect is applied to the sound without going off tempo when the currently playing track. (page 15).

A AUTO/TAP button (page 16)

Switches the BPM measurement mode.

B Beat effect selector switch (page 16)

Switches the BEAT EFFECT effect type.

C Effect channel selector switch (page 16)

Switches the channel to which the BEAT EFFECT is to be applied.

D TIME control (page 16)

Adjusts the BEAT EFFECT’s time parameter.

E LEVEL/DEPTH control (page 16)

Adjusts the BEAT EFFECT’s quantitative parameter.

F ON/OFF button (page 16)

Turns the BEAT EFFECT function on/off.

Do not pull on the channel fader and crossfader knobs with excessive force. The knobs have a structure by which they cannot be pulled off easily. Pulling the knobs strongly may result in damaging the unit.

Basic Operation

Outputting sound

1 Press [POWER] button.

Turn on the power of this unit.

2 Switch the input selector switches.

Selects the input sources for the different channels from among the devices connected to this unit.

[DIGITAL]: Selects the DJ player connected to the [DIGITAL] terminals.

[PHONO]: Selects the analog player connected to the [PHONO] terminals.

[CD/LINE]: Selects the cassette deck or CD player connected to the [CD/ LINE] terminals.

[USB]: Selects the sound of the computer connected to the [USB] port.

3 Turn the [TRIM] control.

Adjusts the level of audio signals input in each channel.

The corresponding channel level indicator lights when audio signals are being properly input to that channel.

4 Move the channel fader away from you.

Adjusts the level of audio signals output in each channel.

5 Switch the [CROSS FADER ASSIGN (A, THRU, B)] selector switch.

Switches the output destination of each channel.

[A]: Assigns to [A] (left) of the crossfader.

[B]: Assigns to [B] (right) of the crossfader.

[THRU]: Selects this when you do not want to use the crossfader. (The signals do not pass through the crossfader.)

6 Set the crossfader.

This operation is not necessary when the [CROSS FADER ASSIGN (A, THRU, B)] selector switch is set to [THRU].

7 Turn the [MASTER LEVEL] control.

Audio signals are output from the [MASTER1] and [MASTER2] terminals. The master level indicator lights.

Adjusting the sound quality

1Switch the [EQ CURVE (ISOLATOR, EQ)] selector switch.

[ISOLATOR]: Functions as an isolator.

[EQ]: The equalizer function is set.

2Turn the [EQ/ISO (HI, MID, LOW)] controls for the respective channels.

The adjustable ranges for the respective controls are as shown below.

HI: –26 dB to +6 dB (13 kHz)

MID: –26 dB to +6 dB (1 kHz)

LOW: –26 dB to +6 dB (70 Hz)

Monitoring sound with headphones

1Connect headphones to the [PHONES] terminal.

2Press the [CUE] button(s) for the channel(s) you want to monitor.

3Switch the [MONO SPLIT, STEREO] selector switch.

[MONO SPLIT]: The sound of the channels for which the [CUE] button is pressed is output from the headphones output’s left channel, the [MASTER] channel sound is output from the right channel.

[STEREO]: The sound of the channels for which the [CUE] button is pressed is output from the headphones in stereo.

4Turn the [MIXING] control.

This adjusts the monitor volume balance of the sound of channels for which the [CUE] button is pressed and the sound of the [MASTER] channel.

5 Turn the [LEVEL] control for [HEADPHONES].

The sound of the channels for which the [CUE] button is pressed is output from the headphones.

!When the [CUE] button is pressed again, monitoring is canceled.

14 En

Switching the fader curve

Select the channel fader curve characteristics

Switch the [CH FADER (, , )] selector switch.

[]: The curve rises suddenly at the back side.

[]: A curve between the ones above and below is set.

[]: The curve rises gradually (the sound gradually increases as the channel fader is moved away from the front side).

Select the crossfader curve characteristics

Switch the [CROSS FADER (, , )] selector switch.

[]: Makes a sharply increasing curve (if the crossfader is moved away from the [A] side, audio signals are immediately output from the [B] side).

[]: Makes a curve shaped between the two curves above and below.

[]: Makes a gradually increasing curve (if the crossfader is moved away from the [A] side, the sound on the [B] side gradually increases, while the sound on the [A] gradually decreases).

Using a microphone

1Connect a microphone to the [MIC1] or [MIC2] terminal.

2Set the [OFF, ON, TALK OVER] selector switch to [ON] or [TALK OVER].

[ON]: The indicator lights.

[TALK OVER]: The indicator flashes.

!When set to [TALK OVER], the sound of channels other than the [MIC] channel is attenuated by 18 dB (default) when a sound of –10 dB or greater is input to the microphone.

!The [TALK OVER] sound attenuation level can be changed at [USER SETUP]. For instructions on changing this, see Changing the settings on page 24.

!The talk over mode can be switched to the normal mode or the advanced mode. For instructions on changing it, see Changing the settings on page 24.

3 Turn the [MIC1 LEVEL] or [MIC2 LEVEL] control.

Adjust the level of the sound output from the [MIC] channel.

!Pay attention that rotating to the extreme right position outputs a very loud sound.

4 Input audio signals to the microphone.

Adjusting the sound quality

Turn the [MIC] channels’ [EQ (HI, LOW)] controls.

The adjustable ranges for the respective controls are as shown below.

HI: –12 dB to +12 dB (10 kHz)

LOW: –12 dB to +12 dB (100 Hz)

Switching between monaural and stereo audio

This switches the sound output from the [MASTER1], [MASTER2], [BOOTH], [REC OUT], [PHONES], [DIGITAL MASTER OUT] and [USB] terminals between monaural and stereo.

!To adjust the sound output from the [USB] terminals, select [MIX (REC OUT)] at [Mixer Audio Output] in the setting utility.

Switch the [MONO, STEREO] selector switch.

[MONO]: Outputs monaural audio.

[STEREO]: Outputs stereo audio.

Adjusting the L/R balance of audio

The left/right balance of the sound output from the [MASTER1], [MASTER2], [BOOTH], [REC OUT], [PHONES], [DIGITAL MASTER OUT] and [USB] terminals can be adjusted.

!To adjust the sound output from the [USB] terminals, select [MIX (REC OUT)] at [Mixer Audio Output] in the setting utility.

1Set the [MONO, STEREO] selector switch to [STEREO].

2Turn the [BALANCE] control.

The sound’s left/right balance changes according to the direction in which the [BALANCE] control is turned and its position.

!Rotating to the rightmost position outputs only the right sound of stereo audio. Rotating to the leftmost position outputs only the left sound of stereo audio.

Audio is output from the [BOOTH] terminal

Turn the [BOOTH MONITOR] control.

Adjusts the level of audio signals output from the [BOOTH] terminal.

Advanced Operations

Using Serato DJ-supported functions

Operation

When this unit and a computer on which Serato DJ is running are connected by

 

USB cable, the functions below can be used.

 

QUANTIZE

 

When tracks that have been analyzed with Serato DJ are used, tracks are put on

 

beat even if the [BEAT EFFECTS] [ON/OFF] button is pressed or the [X-PAD] is

 

touched roughly.

 

FADER START

 

Playback of tracks in Serato DJ can be started by operating this unit’s fader (Fader

 

Start Play).

 

About PRO DJ LINK

 

When a Pioneer DJ player supporting PRO DJ LINK (e.g. CDJ-2000nexus, CDJ-2000,

 

CDJ-900), a computer on which rekordbox is installed and this unit are connected by

 

LAN cable, the PRO DJ LINK functions below can be used.

 

For more details on the PRO DJ LINK function, also refer to the DJ player’s handling

 

instructions and rekordbox’s operating instructions.

 

For instructions on connections, see Connecting input terminals on page 11.

 

!When connected using a switching hub, up to 4 DJ players and 2 computers can be connected.

!Use a 100Base-TX-compatible switching hub. Some switching hubs may not operate properly.

!Set the DJ player’s player number to the same number as the channel to which the audio cable is connected.

QUANTIZE

When tracks analyzed with rekordbox are used, the track is put on beat even when the [ON/OFF] button of [BEAT EFFECTS] is pressed or the [X-PAD] is touched roughly.

FADER START

Playback on the DJ player can be started by operating this unit’s fader (Fader Start Play).

LINK MONITOR

With this function, rekordbox music files stored on the computer can be quickly monitored over the headphones.

STATUS INFORMATION

This function informs the DJ players of the connected channel status (on-air status, channel number, etc.).

Using the QUANTIZE function

Effects can be applied to the sound in tempo with the currently playing track based on the GRID information of tracks that have been analyzed with Serato DJ or rekordbox.

To use the QUANTIZE function with PRO DJ LINK, connect this unit and a PRO DJ LINK-compatible Pioneer DJ player beforehand. For instructions on connecting, see

Connecting input terminals on page 11.

In addition, music files must have been analyzed with rekordbox beforehand in order to use the QUANTIZE function. For instructions on analyzing music files with rekordbox, also see rekordbox’s operating instructions.

!When using in combination with the CDJ-2000nexus, first update the firmware to version 1.02 or later.

!To use in combination with the CDJ-2000 or CDJ-900, first update the firmware to version 4.0 or later.

1 Press the [QUANTIZE] button.

The QUANTIZE function turns on.

[GRID] lights on this unit’s main unit display when the GRID information has been properly received from Serato DJ or the DJ player and the QUANTIZE function can be used. [GRID] flashes if the GRID information has not been properly received.

En 15

!Depending on the playing status of Serato DJ or the DJ player (off air, scratching, playing in reverse, etc.), it may not be possible to receive the GRID information.

2 Press the [ON/OFF] button of [BEAT EFFECTS] or touch the [X-PAD].

The effect is added to the sound in tempo with the track being played.

!When the [QUANTIZE] button is pressed again, the QUANTIZE function turns off.

Using the FADER START function

When this unit and a computer on which Serato DJ is running are connected by USB cable, such operations as starting playback of tracks in Serato DJ can be controlled using this unit’s fader.

Connect this unit and a computer on which Serato DJ is running beforehand. In the same way, when this unit and a Pioneer DJ player are connected by LAN

cable, such operations as starting playback of the DJ player can be controlled using this unit’s fader.

Connect the Pioneer DJ player and this unit beforehand. For instructions on connecting, see Connecting input terminals on page 11.

For instructions on setting the player numbers of Pioneer DJ players, see About PRO DJ LINK on page 15.

The fader start function can be switched on and off for all DJ players all at once. For the switching procedure, see Changing the settings on page 24.

!The FADER START function cannot be used when attempting to perform DVS control while Serato DJ is set to the Absolute mode. When one of the [FADER START (1, 2, 3, 4)] buttons is pressed while the Absolute mode is set, that button flashes then turns off.

Start playback using the channel fader

1Set the [CROSS FADER ASSIGN (A, THRU, B)] selector switch to [THRU].

2Press one of the [FADER START (1, 2, 3, 4)] buttons.

Select the channel to be started with the fader start function.

!For Serato DJ

[Fader Start 1] button: Selects [DECK 3].

[Fader Start 2] button: Selects [DECK 1].

[Fader Start 3] button: Selects [DECK 2].

[Fader Start 4] button: Selects [DECK 4].

3Set the channel fader to the nearest position towards you.

4Set a cue in Serato DJ or on the DJ player.

The track cues to the cue point and the pause mode is set.

5 Move the channel fader away from you.

Playback of the track in Serato DJ or the DJ player starts.

!If you set the channel fader back to the original position, the player instantaneously returns to the cue point already set and pauses playback (back cue).

Start playback using the crossfader

1Set the [CROSS FADER ASSIGN (A, THRU, B)] selector switch to [A] or [B].

2Press one of the [FADER START (1, 2, 3, 4)] buttons.

Select the channel to be started with the fader start function.

!For Serato DJ

[Fader Start 1] button: Selects [DECK 3].

[Fader Start 2] button: Selects [DECK 1].

[Fader Start 3] button: Selects [DECK 2].

[Fader Start 4] button: Selects [DECK 4].

3 Set the crossfader.

Set to the edge opposite the side on which the channel you want to use with the fader start function is set.

4 Set a cue in Serato DJ or on the DJ player.

The track cues to the cue point and the pause mode is set.

5 Set the crossfader.

Playback of the track in Serato DJ or the DJ player starts.

!If you set the crossfader back to the original position, the player instantaneously returns to the cue point already set and pauses playback (back cue).

Using the LINK MONITOR function

!Check [Use “LINK MONITOR” of Pioneer DJ Mixers.] at [File] > [Preferences] > [Audio] in rekordbox beforehand. Also refer to the rekordbox operating instructions.

16 En

1Connect headphones to the [PHONES] terminal.

2Connect a computer on which rekordbox is installed.

For instructions on connections, see Connecting input terminals on page 11.

3Selecting the track to be monitored with rekordbox.

4Press the [CUE] button for [LINK].

The track selected with rekordbox is output from the headphones.

!When the [CUE] button is pressed again, monitoring is canceled.

!The same operation as at Monitoring sound with headphones (steps 3 to 5) can be performed.

Using the SOUND COLOR FX function

These are effects that change in association with the [COLOR] control.

1 Press one of the [SOUND COLOR FX] selection buttons.

This selects the type of effect.

The button that was pressed flashes.

!Even if one of the [SOUND COLOR FX] selection buttons is already selected, when a different button is selected and pressed, that button is selected.

!For the types of effects, see Types of SOUND COLOR FX effects on page 19.

!The same effect is set for [CH1] to [CH4].

2 Turn the [COLOR] control.

The effect is applied to the channel(s) for which the control(s) was (were) pressed.

Canceling the SOUND COLOR FX effect

Press the [SOUND COLOR FX] selection button that is flashing.

The effect is canceled.

Using the BEAT EFFECT function

This function lets you instantaneously set various effects according to the tempo (BPM = Beats Per Minute) of the currently playing track.

Main unit display

1

 

 

 

 

 

 

 

 

 

 

CH SELECT

 

 

 

 

 

 

 

 

2

 

 

1

 

2

 

 

3

4

 

 

 

 

 

 

 

 

 

MIC

 

A

 

B

 

MST

 

 

 

 

 

 

 

 

 

 

 

 

PARAMETER

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

AUTO

 

 

 

 

 

 

 

GRID

5

 

 

 

 

TAP

 

 

 

 

 

 

 

BPM

 

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

 

 

 

 

 

 

 

 

 

 

 

 

 

%

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ms

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

Effect display

The name of the selected effect is displayed.

section

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Channel select

The name of the channel to which the effect is applied is displayed.

display section

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[AUTO] lights when the BPM measurement mode is set to the auto

3

AUTO (TAP)

mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[TAP] lights when in the manual input mode.

 

 

 

 

When in the auto mode, this displays the automatically detected

 

 

 

 

BPM value.

 

 

 

 

 

 

 

 

 

 

 

 

 

4

BPM value display

When the BPM cannot be detected, the previously detected BPM

(3 digits)

value is displayed and flashes.

 

 

 

 

 

 

 

 

 

When in the manual input mode, this displays the BPM value that

 

 

 

 

was input manually.

 

 

 

 

 

 

 

 

 

 

 

 

 

This lights when Serato DJ is running and the QUANTIZE func-

 

 

 

 

tion can be used. It also lights when playing a track that has been

5

GRID

analyzed with rekordbox and the QUANTIZE function can be used

 

 

 

 

in combination with the DJ player. It flashes or is off when the

 

 

 

 

QUANTIZE function cannot be used.

 

 

6

BPM

This is always lit.

 

 

 

 

 

 

 

 

 

 

 

 

 

This displays the parameters specified for the individual effects.

 

 

 

 

When the [BEAT c, d] button is pressed, the corresponding beat

7

Parameter display

fraction is displayed for 1 second.

 

 

section

When a value outside the parameter range is specified with the

 

 

 

 

 

[BEAT c, d] button, the value does not change and the display

 

 

 

 

flashes.

 

 

 

 

 

 

 

 

 

 

 

 

 

8

% (ms)

These light according to the units for the different effects.

9

Beat display

This lights according to the selected beat number position.

section

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A

Touch display

This lights when the [X-PAD] is touched.

 

 

section

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Press [AUTO/TAP] button.

Select the BPM measurement mode.

[AUTO]: The BPM is measured automatically from the audio signal that is being input. The [AUTO] mode is set when this unit’s power is turned on.

[TAP]: The BPM is input manually by tapping the [TAP] button with a finger.

!The [AUTO] BPM measurement range is BPM = 70 to 180. With some tracks it may not be possible to measure the BPM correctly. If the BPM cannot be measured, the BPM value on the display flashes. In such cases, use the [TAP] button to input the BPM manually.

2 Turn the beat effect selector switch.

This selects the type of effect.

!For the types of effects, see Types of BEAT EFFECT on page 19.

!To use [SND/RTN], see Using the external effector below.

!To use [MIDI LFO], see Using the MIDI LFO on page 17.

3 Turn the effect channel selector switch.

This selects the channel to which the effect is applied.

[1] – [4]: The effect is applied to the sound of the respective channel.

[MIC]: The effect is applied to the sound of [MIC] channel.

[CF.A], [CF.B]: The effect is applied to the sound of the crossfader’s [A] (left) or [B] (right) side.

[MASTER]: The effect is applied to the sound of the [MASTER] channel.

!This operation is not necessary when [MIDI LFO] is selected.

4 Press the [BEAT c, d] button.

Set the beat fraction for synchronizing the effect sound.

The effect time corresponding to the beat fraction is set automatically.

5 Press the [ON/OFF] button for [BEAT EFFECTS].

The effect is applied to the sound.

The effect’s time parameter can be adjusted by turning the [TIME] control.

The effect’s quantitative parameter can be adjusted by turning the [LEVEL/DEPTH] control.

The [ON/OFF] button flashes when the effect is on.

!When the [ON/OFF] button is pressed again, the effect turns off.

Inputting the BPM manually

Tap the [TAP] button at least 2 times in rhythm with the beat (in quarter notes) of the sound being played.

The average value of the interval at which the [TAP] button was tapped by finger is set as the BPM.

!When the BPM is set using the [TAP] button, the beat fraction is set to [1/1] and the time of one beat (quarter note) is set as the effect time.

!The BPM can be set manually by turning the [TIME] control while pressing the [TAP] button.

!The BPM can be set in units of 0.1 by pressing the [AUTO/TAP] button while pressing the [TAP] button and turning the [TIME] control while pressing the two buttons.

Using the external effector

1 Connect this unit and external effector.

For instructions on connections, see Connecting output terminals on page 11.

2 Turn the beat effect selector switch.

Select [SND/RTN (MIDI LFO)].

3 Turn the effect channel selector switch.

This selects the channel to which the effect is applied.

4 Press the [ON/OFF] button for [BEAT EFFECTS].

The sound that has passed through the external effector is output from the [MASTER] channel.

!When the [ON/OFF] button is pressed again, the effect turns off.

Operating the [X-PAD]

Operating [ON/OFF] button status of [BEAT

X-PAD

Effect

procedure EFFECTS]

 

 

1

Off (lit)

Release n Touch

Off n On

2

On (flashing)

Release n Touch

On n On

Operating procedure 1

1Perform steps 1 to 4 of the Using the BEAT EFFECT function procedure.

2Touch the [X-PAD].

The [X-PAD] turns the effect on and off and changes the quantitative parameter.

!When you release your finger from the [X-PAD], the effect turns off.

!To keep the effect on when you release your finger from the [X-PAD], while touching the [X-PAD] press the [ON/OFF] button of [BEAT EFFECTS], then release your finger from the [X-PAD].

Operating procedure 2

1Perform steps 1 to 5 of the Using the BEAT EFFECT function procedure.

2Touch the [X-PAD].

The [X-PAD] changes the effect’s quantitative parameter.

Operating DJ software using the MIDI function

This unit outputs the operation information of buttons and controls in universal MIDI

Operation

format.

 

When connected by USB cable to a computer on which a MIDI-compatible DJ soft-

 

ware program is installed, the DJ software can be operated from this unit.

 

Install the DJ software on your computer in advance. Also, adjust the audio and

 

MIDI settings for the DJ software.

 

!For MIDI channel setting instructions, see Changing the settings on page 24.

!For the messages output by this unit, see MIDI assignment map on page 22.

1 Connect this unit’s [USB] terminal to the computer.

For details about connections, see Connecting to the control panel on page 12.

2Launch the DJ software.

3Press the [ON/OFF (UTILITY)] button.

Turn the MIDI function on.

Transmission of the MIDI messages begin.

!When a fader or control is moved, a message corresponding to the position is sent.

!When the [START/STOP] button is pressed and held in for more than 2 seconds, a set of MIDI messages corresponding to the button, fader or control positions is sent (Snapshot).

!When the [ON/OFF (UTILITY)] button is pressed again, sending of the MIDI messages is stopped.

!The MIDI timing clock (BPM information) is sent regardless of the status of the [ON/OFF (UTILITY)] button.

Making the preparations to use the MIDI LFO function

The MIDI-compatible software, devices, etc. (referred to as the “MIDI signal reception side” below) must be prepared (“learned”) before using the MIDI LFO function. Perform the learning operations on the MIDI signal reception side.

!For the messages output by this unit, see MIDI assignment map on page 22.

1 Press the [ON/OFF (UTILITY)] button.

Turn the MIDI function on.

2 Turn the beat effect selector switch.

Select [SND/RTN (MIDI LFO)].

[S/RhLFO] flashes on the effect display section, then [SND/RTN] is displayed.

3 Press the [ON/OFF] button for [BEAT EFFECTS].

Learn the [ON/OFF] button’s MIDI message of the [BEAT EFFECTS] in the MIDI signal reception side.

!The MIDI message sent from the [ON/OFF] button of the [BEAT EFFECTS] differs when [SND/RTN (MIDI LFO)] is selected and when anything other than [SND/RTN (MIDI LFO)] is selected.

The [ON/OFF] button’s MIDI message of [BEAT EFFECTS] when [SND/RTN (MIDI LFO)] is selected is only sent when the operation is performed following this procedure.

4 Press the [LFO FORM (WAKE UP)] button.

Learn the [LFO FORM (WAKE UP)] button’s MIDI message in the MIDI signal reception side.

[1/7] and [1/7 LFO] are displayed alternately on the effect display section.

!If necessary, set the MIDI mapping for other buttons and controls.

Because the [LFO FORM (WAKE UP)] button’s MIDI message is sent sequentially, depending on the MIDI signal reception side’s settings, it may not be possible to learn the MIDI message.

To set the MIDI mapping for other buttons and controls, press the [LFO FORM(WAKE UP)] button to switch to [SND/RTN].

Using the MIDI LFO

Make the preparations following the procedure at Making the preparations to use the MIDI LFO function beforehand.

1 Turn the beat effect selector switch.

Select [SND/RTN (MIDI LFO)].

[S/RhLFO] flashes on the effect display section, then [SND/RTN] is displayed.

2 Press the [LFO FORM (WAKE UP)] button.

Transmission of the MIDI signals begins.

The MIDI signal waveform pattern switches each time the [LFO FORM (WAKE UP)] button is pressed.

En 17

[SND/RTN]

 

 

[1/7

]

 

[2/7

]

 

 

 

[3/7

]

 

 

 

 

 

[7/7

 

 

 

 

 

 

 

]

 

 

[6/7

 

 

 

 

 

 

 

]

 

[5/7

]

 

 

[4/7

]

3 Press the [BEAT c, d] button.

Set the MIDI signal’s waveform output time.

4 Press the [ON/OFF] button of [BEAT EFFECTS] or touch the [X-PAD].

The MIDI message for turning the effect on is sent.

!When the [LFO FORM (WAKE UP)] button is pressed and a setting from

[1/7] – [7/7] is selected, the MIDI message for the buttons and controls below can be sent even when the MIDI mode is turned off.

[X-PAD] (Touch n Release)

[CUE] button of [BEAT EFFECTS]

Effect channel selector switch

[LEVEL/DEPTH] control

[ON/OFF] button of [BEAT EFFECTS]

!When the [LFO FORM (WAKE UP)] button is pressed to switch between [SND/RTN] and [MIDI LFO], BEAT EFFECT automatically turns off.

!It is not possible to switch between [SND/RTN] and [MIDI LFO] while touching the [X-PAD].

Sending the MIDI start and MIDI stop messages

Press the [START/STOP] button for [MIDI].

!The MIDI start and MIDI stop messages are sent alternatively each time the [START/STOP] button is pressed, regardless of whether the MIDI function is on or off.

Operating an external MIDI sequencer

This unit outputs the operation information of buttons and controls in universal MIDI format.

This unit sends the tempo of the currently playing source (BPM information) as the MIDI timing clock. This can be used to synchronize an external MIDI sequencer with the tempo of the source.

!For the messages output by this unit, see MIDI assignment map on page 22.

!External MIDI sequencers not supporting MIDI timing clocks cannot be synchronized.

!External MIDI sequencers cannot be synchronized for sources for which the BPM cannot be measured stably.

!The MIDI timing clock is output even with BPM values input manually by tapping the [TAP] button with a finger. The MIDI timing clock output range is 40 BPM to 250 BPM.

1Connect the [MIDI OUT] terminal to the external MIDI sequencer’s MIDI IN terminal using a commercially available MIDI cable.

2Set the external MIDI sequencer’s sync mode to Slave.

3Press the [START/STOP] button for [MIDI].

The MIDI start message is sent.

4 Press [ON/OFF] in the [MIDI] section.

Transmission of the MIDI messages begin.

18 En

Types of effects

Types of SOUND COLOR FX effects

Effect Name

Descriptions

[COLOR] control

 

 

Turn counterclockwise: Applies the

 

 

reverberation effect to the midand

SPACE

Applies a reverberation effect to

low ranges.

the original sound.

Turn clockwise: Applies the rever-

 

 

 

beration effect to the midand high

 

 

ranges.

 

Applies an echo effect, with the

Turn counterclockwise: Applies the

DUB ECHO

sound delayed slightly after the

echo effect to the mid-range only.

original sound output several

Turn clockwise: Applies the echo

 

 

times and gradually attenuated.

effect to the high range only.

 

 

Turn counterclockwise: A gate

 

 

effect makes the sound tighter,

GATE/COMP

Changes the texture of the overall

with a reduced sense of volume.

sound.

Turn clockwise: A compressor

 

 

 

effect makes the sound fatter, with

 

 

an increased sense of volume.

 

White noise generated inside

 

 

this unit is mixed in to the sound

Turn counterclockwise: The cut-

 

of the channel via the filter and

 

off frequency of the filter through

 

output.

 

which the white noise passes

 

! The volume can be adjusted

 

gradually decreases.

NOISE

by turning the [TRIM]

Turn clockwise: The cut-off fre-

 

controls for the respective

 

quency of the filter through which

 

channels. The sound quality

 

the white noise passes gradually

 

can be adjusted by turning

 

increases.

 

the [EQ/ISO (HI, MID, LOW)]

 

controls.

 

 

 

Turn counterclockwise: Increases

 

Changes the original sound to a

the sound’s distortion.

CRUSH

Turn clockwise: The sound is

crushed-like sound for output.

 

crushed before passing through

 

 

 

 

the high pass filter.

 

 

Turn counterclockwise: Gradually

 

 

decreases the low-pass filter’s

FILTER

Outputs sound that has passed

cutoff frequency.

through a filter.

Turn clockwise: Gradually

 

 

 

increases the high-pass filter’s

 

 

cutoff frequency.

Types of BEAT EFFECT

DELAY1

A delay sound is output once according to the beat fraction set with the [BEAT c, d] buttons.

When 1/2 beat delay sound is added, 4 beats become 8 beats.

Original (4 beats)

1/2 delay (8 beats)

BEAT c, d buttons (parameter 1)

Use these to set a time delay of 1/8 16/1 with respect to the

time of one beat of the BPM.

TIME control (parameter 2)

Use this to set the delay time.

1 to 4000 (ms)

 

LEVEL/DEPTH control (paramUse this to set the balance between the original sound and the

eter 3)

delay sound.

X-PAD (parameter 4)

Use this to set the delay time.

LEVEL/DEPTH control (paramUse this to set the balance between the original sound and the

eter 3)

echo sound.

X-PAD (parameter 4)

Use this to set the delay time.

SPIRAL1 2

This function adds a reverberation effect to the input sound.

When the delay time is changed, the pitch changes simultaneously.

 

 

 

 

 

 

Input sound turned off

ofTypes

 

 

 

 

 

 

Fade-out

 

 

 

 

 

 

 

 

Time

effects

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BEAT c, d buttons (parameter 1) Use these to set a time delay of 1/8 16/1 with respect to the

 

 

1 beat

 

 

 

 

 

 

 

 

 

 

time of one beat of the BPM.

 

TIME control (parameter 2)

 

Use this to set the delay time.

 

 

10 to 4000 (ms)

 

 

 

 

 

 

 

LEVEL/DEPTH control (paramUse this to set the balance between the original sound and the

 

eter 3)

 

effect sound and to set the quantitative parameter.

 

X-PAD (parameter 4)

 

Use this to set the delay time.

 

REVERB1 2

This function adds a reverberation effect to the input sound.

Direct sound Early reflected sound

Level

Reverberations

 

1%

Time

100%

BEAT c, d buttons (parameter 1)

Use these to set the extent of the reverberation effect, from

1

100 %.

TIME control (parameter 2)

Use this to set the degree of the reverb effect.

1

100 (%)

 

LEVEL/DEPTH control (paramSets the balance between the original sound and the effect

eter 3)

sound.

X-PAD (parameter 4)

Sets the filter’s cut-off frequency.

TRANS1

The sound is cut according to the beat fraction set with the [BEAT c, d] buttons.

Cut

Cut

 

 

 

 

 

 

 

 

 

 

 

 

1/1 beat

 

 

 

 

 

Time

 

 

 

 

 

BEAT c, d buttons (parameter 1)

Use these to set a cut time of 1/16 16/1 with respect to the

time of one beat of the BPM.

TIME control (parameter 2)

Use this to set the effect time.

10 to 16000 (ms)

 

 

 

 

LEVEL/DEPTH control (paramSets the balance between the original sound and the effect

eter 3)

sound.

X-PAD (parameter 4)

This sets the cut time.

ECHO1 2

A delay sound is output several times and gradually attenuated according to the beat fraction set with the [BEAT c, d] buttons.

With 1/1 beat echoes, the delay sounds are faded out according to the track’s tempo even after the input sound has been cut.

 

 

 

 

 

 

 

 

 

 

Input sound turned off

 

 

 

 

 

 

 

 

 

 

Fade-out

 

 

 

 

 

 

 

 

 

 

 

Time

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 beat

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BEAT c, d buttons (parameter 1)

Use these to set a time delay of 1/8 16/1 with respect to the

time of one beat of the BPM.

TIME control (parameter 2)

Use this to set the delay time.

1 to 4000 (ms)

 

 

 

 

 

 

 

 

 

FILTER1

The filter’s cutoff frequency changes according to the beat fraction set with the [BEAT c, d] buttons.

Frequency

Use these to set the cycle for moving the cut-off frequency BEAT c, d buttons (parameter 1) as a time of 1/4 64/1 with respect to the time of one beat of

 

the BPM.

 

Use this to set the cycle at which the cut-off frequency is

TIME control (parameter 2)

moved.

 

10 to 32000 (ms)

LEVEL/DEPTH control (paramThe further the control is turned clockwise, the more the effect eter 3) is stressed.

En 19

This sets the way in which the recorded sound is played.
This sets the balance between the original sound and the recorded sound.
This sets the way in which the recorded sound is played.

X-PAD (parameter 4)

The cycle at which the cut-off frequency is moved fluctuates

finely.

 

FLANGER1

A 1-cycle flanger effect is produced according to the beat fraction set with the [BEAT c, d] buttons.

Short delay

 

 

 

Time

 

Cycle

 

 

 

 

 

BEAT c, d buttons (parameter 1)

Use these to set the 1/4 64/1 effect time with respect to the

time of one beat of the BPM.

TIME control (parameter 2)

Use this to set the cycle by which the flanger effect moves.

10 to 32000 (ms)

 

 

 

 

 

 

The further the control is turned clockwise, the more the effect

LEVEL/DEPTH control (param-

is stressed.

eter 3)

When turned all the way counterclockwise, only the original

 

 

 

sound is output.

X-PAD (parameter 4)

The cycle at which the flanger effect is moved fluctuates finely.

PHASER1

The phaser effect changes according to the beat fraction set with the [BEAT c, d] buttons.

Phase shift

Time

Cycle

Use these to set the cycle for moving the phaser effect as of BEAT c, d buttons (parameter 1) time of 1/4 64/1 with respect to the time of one beat of the

 

BPM.

TIME control (parameter 2)

This sets the cycle by which the phaser effect is moved.

10 to 32000 (ms)

 

 

The further the control is turned clockwise, the more the effect

LEVEL/DEPTH control (param-

is stressed.

eter 3)

When turned all the way counterclockwise, only the original

 

sound is output.

X-PAD (parameter 4)

The cycle at which the phaser effect is moved fluctuates finely.

ROBOT1

The original sound is changed to a sound like one produced by a robot.

BEAT c, d buttons (parameter 1)

Use this to set the degree of the effect sound.

-100100

(%)

TIME control (parameter 2)

Use this to set the degree of the effect sound.

-100100

(%)

 

LEVEL/DEPTH control (paramSets the balance between the original sound and the effect

eter 3)

sound.

X-PAD (parameter 4)

This changes the degree of the effect sound.

MELODIC1 2

The mid-range of the sound being input at the point when the [ON/OFF] button is pressed is recorded, and the recorded sound is output according to the level of the sound being input.

BEAT c, d buttons (parameter 1) This sets the way in which the recorded sound is played.

TIME control (parameter 2)

LEVEL/DEPTH control (parameter 3)

X-PAD (parameter 4)

SLIP ROLL1 2

The sound being input at the point when the [ON/OFF] is pressed is recorded, and the recorded sound is output repeatedly according to the beat fraction set with the [BEAT c, d] buttons.

When the effect time changes, the input sound is recorded again.

Original

Effect turned on

Changed from 1/2

 

 

 

 

 

to 1/1

 

 

Roll

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1/2 repeat

1/1 repeat

 

20 En

BEAT c, d buttons (parameter 1)

Use these to set an effect time of 1/16 16/1 with respect to

the time of one beat of the BPM.

TIME control (parameter 2)

Use this to set the effect time.

10 to 4000 (ms)

 

LEVEL/DEPTH control (paramUse this to set the balance between the original sound and

eter 3)

ROLL.

X-PAD (parameter 4)

Use this to set the effect time.

ROLL1 2

The sound being input at the point when the [ON/OFF] is pressed is recorded, and the recorded sound is output repeatedly according to the beat fraction set with the [BEAT c, d] buttons.

Original

Effect turned on

1/1 roll

Repeated

BEAT c, d buttons (parameter 1)

Use these to set an effect time of 1/16 16/1 with respect to

the time of one beat of the BPM.

TIME control (parameter 2)

Use this to set the effect time.

10 to 4000 (ms)

 

LEVEL/DEPTH control (paramUse this to set the balance between the original sound and

eter 3)

ROLL.

X-PAD (parameter 4)

Use this to set the effect time.

REV ROLL1 2

The sound being input at the point when the [ON/OFF] button is pressed is recorded, and the recorded sound is reversed then output repeatedly according to the beat fraction set with the [BEAT c, d] buttons.

Original

Effect turned on

1/1 reverse roll

Reversed and repeated

BEAT c, d buttons (parameter 1)

Use these to set an effect time of 1/16 16/1 with respect to

the time of one beat of the BPM.

TIME control (parameter 2)

Use this to set the effect time.

10 to 4000 (ms)

 

LEVEL/DEPTH control (paramUse this to set the balance between the original sound and

eter 3)

ROLL.

X-PAD (parameter 4)

Use this to set the effect time.

SND/RTN (MIDI LFO)

Connect an external effector, etc., here.

By pressing the [LFO FORM (WAKE UP)] button, MIDI-compatible software and devices can be controlled using MIDI signals.

SND/RTN1

Connect an external effector, etc., here.

SEND

RETURN

Effector

DJM-900SRT Serato DJ Edition

BEAT c, d buttons (parameter 1) —

TIME control (parameter 2)

LEVEL/DEPTH control (param-

This adjusts the sound level input to the [RETURN] terminal.

eter 3)

 

X-PAD (parameter 4)

MIDI LFO

The MIDI signal (0 – 127) waveform is changed according to the track’s tempo.

The MIDI signal waveform pattern switches each time the [LFO FORM (WAKE UP)] button is pressed.

BEAT c, d buttons (parameter 1)

Use these to set a waveform output time of 1/4 64/1 with

respect to one beat of the BPM.

TIME control (parameter 2)

Use this to set the waveform output time.

LEVEL/DEPTH control (param-

eter 3)

 

X-PAD (parameter 4)

This changes the MIDI signal’s waveform pattern.

!When [MIDI LFO] is selected, the sound of the external effector connected to the [RETURN] terminal is not input.

1When [CF.A], [CF.B] or [MASTER] is selected with the effect channel selector switch, if the sound of the channel you want to monitor is not being output to the [MASTER] channel, the effect sound cannot be monitored even if the [CUE] button for [BEAT EFFECTS] is pressed.

2If the effect is off, the effect sound cannot be monitored even by pressing the [CUE] button for [BEAT EFFECTS].

effects of Types

En 21

MIDI assignment map

MIDI assignment map

!“CC” is the abbreviation of “control change”. A control change is a type of MIDI signal used to transmit various types of control information, such as timbre, volume, etc. On this unit, values from 0 to 127 are output as CC mainly when controls and faders are operated. CC are also output when certain buttons are operated.

!“Note” is a MIDI term used when pressing or releasing notes on a piano or other keyboard.

Category

 

Button/Control/Switch

 

MIDI assignment

Trigger/Toggle

Transmitted data

 

Name

Type

 

 

 

 

 

 

 

 

 

DIGITAL

Switch

Note 050

2

OFF=0, ON=127

 

Input Selector Switch

 

CD/LINE

Switch

Note 051

2

OFF=0, ON=127

 

 

PHONO

Switch

Note 052

2

OFF=0, ON=127

 

 

 

 

 

 

 

 

USB DECK 3

Switch

Note 053

2

OFF=0, ON=127

 

TRIM

 

 

 

Control

CC 001

0-127

CH1

HI

 

 

 

Control

CC 002

0-127

MID

 

 

 

Control

CC 003

0-127

 

 

 

 

 

LOW

 

 

 

Control

CC 004

0-127

 

COLOR

 

 

 

Control

CC 005

0-127

 

CUE

 

 

 

Button

CC 070

Trigger/Toggle

OFF=0, ON=127

 

Channel fader

 

 

 

Control

CC 017

0-127

 

CROSS FADER ASSIGN

 

 

Switch

CC 065

0, 64, 127

 

 

 

 

DIGITAL

Switch

Note 054

2

OFF=0, ON=127

 

Input Selector Switch

 

CD/LINE

Switch

Note 055

2

OFF=0, ON=127

 

 

PHONO

Switch

Note 056

2

OFF=0, ON=127

 

 

 

 

 

 

 

 

USB DECK 1

Switch

Note 057

2

OFF=0, ON=127

 

TRIM

 

 

 

Control

CC 006

0-127

CH2

HI

 

 

 

Control

CC 007

0-127

MID

 

 

 

Control

CC 008

0-127

 

 

 

 

 

LOW

 

 

 

Control

CC 009

0-127

 

COLOR

 

 

 

Control

CC 010

0-127

 

CUE

 

 

 

Button

CC 071

Trigger/Toggle

OFF=0, ON=127

 

Channel fader

 

 

 

Control

CC 018

0-127

 

CROSS FADER ASSIGN

 

 

Switch

CC 066

0, 64, 127

 

 

 

 

DIGITAL

Switch

Note 058

2

OFF=0, ON=127

 

Input Selector Switch

 

CD/LINE

Switch

Note 059

2

OFF=0, ON=127

 

 

PHONO

Switch

Note 060

2

OFF=0, ON=127

 

 

 

 

 

 

 

 

USB DECK 2

Switch

Note 061

2

OFF=0, ON=127

 

TRIM

 

 

 

Control

CC 012

0-127

CH3

HI

 

 

 

Control

CC 014

0-127

MID

 

 

 

Control

CC 015

0-127

 

 

 

 

 

LOW

 

 

 

Control

CC 021

0-127

 

COLOR

 

 

 

Control

CC 022

0-127

 

CUE

 

 

 

Button

CC 072

Trigger/Toggle

OFF=0, ON=127

 

Channel fader

 

 

 

Control

CC 019

0-127

 

CROSS FADER ASSIGN

 

 

Switch

CC 067

0, 64, 127

 

 

 

 

DIGITAL

Switch

Note 062

2

OFF=0, ON=127

 

Input Selector Switch

 

CD/LINE

Switch

Note 063

2

OFF=0, ON=127

 

 

PHONO

Switch

Note 064

2

OFF=0, ON=127

 

 

 

 

 

 

 

 

USB DECK 4

Switch

Note 065

2

OFF=0, ON=127

 

TRIM

 

 

 

Control

CC 080

0-127

CH4

HI

 

 

 

Control

CC 081

0-127

MID

 

 

 

Control

CC 092

0-127

 

 

 

 

 

LOW

 

 

 

Control

CC 082

0-127

 

COLOR

 

 

 

Control

CC 083

0-127

 

CUE

 

 

 

Button

CC 073

Trigger/Toggle

OFF=0, ON=127

 

Channel fader

 

 

 

Control

CC 020

0-127

 

CROSS FADER ASSIGN

 

 

Switch

CC 068

0, 64, 127

Crossfader

Crossfader

 

 

 

Control

CC 011

0-127

Fader curve

CH FADER ( ,

,

)

 

Switch

CC 094

0, 64, 127

CROSS FADER (

,

, )

Switch

CC 095

0, 64, 127

 

 

MASTER LEVEL

 

 

 

Control

CC 024

0-127

Master

BALANCE

 

 

 

Control

CC 023

0-127

CUE

 

 

 

Button

CC 074

Trigger/Toggle

OFF=0, ON=127

 

 

 

 

 

EQ CURVE (ISOLATOR, EQ)

Switch

CC 033

0, 127

BOOTH MONITOR

BOOTH MONITOR

 

 

 

Control

CC 025

0-127

LINK

CUE

 

 

 

Button

CC 115

Trigger/Toggle

OFF=0, ON=127

 

c

 

 

 

Button

CC 076

Trigger/Toggle

OFF=0, ON=127

 

d

 

 

 

Button

CC 077

Trigger/Toggle

OFF=0, ON=127

 

AUTO/TAP

 

 

 

Button

CC 069

Trigger/Toggle

OFF=0, ON=127

 

TAP

 

 

 

Button

CC 078

Trigger only

OFF=0, ON=127

 

CUE

 

 

 

Button

CC 075

Trigger/Toggle

OFF=0, ON=127

 

 

 

 

DELAY

Switch

CC 042

2

OFF=0, ON=127

 

 

 

 

ECHO

Switch

CC 055

2

OFF=0, ON=127

 

 

 

 

SPIRAL

Switch

CC 043

2

OFF=0, ON=127

 

 

 

 

REVERB

Switch

CC 054

2

OFF=0, ON=127

BEAT EFFECTS

 

 

 

TRANS

Switch

CC 053

2

OFF=0, ON=127

 

 

 

 

FILTER

Switch

CC 059

2

OFF=0, ON=127

 

EFFECT SELECT

 

 

FLANGER

Switch

CC 050

2

OFF=0, ON=127

 

 

 

PHASER

Switch

CC 057

2

OFF=0, ON=127

 

 

 

 

 

 

 

 

ROBOT

Switch

CC 051

2

OFF=0, ON=127

 

 

 

 

MELODIC

Switch

CC 061

2

OFF=0, ON=127

 

 

 

 

SLIP ROLL

Switch

CC 058

2

OFF=0, ON=127

 

 

 

 

ROLL

Switch

CC 046

2

OFF=0, ON=127

 

 

 

 

REV ROLL

Switch

CC 047

2

OFF=0, ON=127

 

 

 

 

SND/RTN (MIDI LFO)

Switch

CC 062

2

OFF=0, ON=127

22 En

Category

 

 

Button/Control/Switch

 

MIDI assignment

Trigger/Toggle

Transmitted data

 

 

 

Name

Type

 

 

 

 

 

 

 

 

 

 

 

 

CH1

Switch

CC 034

2

OFF=0, ON=127

 

 

 

 

 

CH2

Switch

CC 035

2

OFF=0, ON=127

 

 

 

 

 

CH3

Switch

CC 036

2

OFF=0, ON=127

 

 

CH SELECT

 

CH4

Switch

CC 037

2

OFF=0, ON=127

 

BEAT EFFECTS

 

MIC

Switch

CC 038

2

OFF=0, ON=127

 

 

 

 

 

 

 

 

CF.A

Switch

CC 039

2

OFF=0, ON=127

 

 

 

 

 

 

 

 

 

 

CF.B

Switch

CC 040

2

OFF=0, ON=127

 

 

 

 

 

MASTER

Switch

CC 041

2

OFF=0, ON=127

 

 

MIDI LFO

 

 

Control

CC 118

0-127

 

 

QUANTIZE

 

 

Button

Note 118

Trigger/Toggle

 

 

 

 

 

 

Switch

CC 013

 

 

 

 

 

 

 

 

 

TIME value (When FLANGER, PHASER

 

 

TIME

 

 

Switch

CC 045

or FILTER is selected, the value is halved.

 

 

 

 

 

 

When a negative value is selected, it is set

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to a positive value.)

 

 

LEVEL/DEPTH

 

 

Control

CC 091

0-127

 

 

X-PAD

 

 

Control

CC 116

Sends the [X-PAD] position information.

 

BEAT EFFECTS

ON/OFF

 

 

 

 

 

 

 

 

X-PAD (touch)

 

 

Button

CC 114

2

OFF=0, ON=127

MIDI

 

!

When an effect other than [SND/RTN (MIDI

 

 

 

 

 

 

 

 

 

 

LFO)] is selected at BEAT EFFECT

 

 

 

 

 

 

ON/OFF

 

 

Button

CC 085

Trigger/Toggle1

OFF=0, ON=127

assignment

 

NOISE

 

 

 

X-PAD (touch)

 

 

Button

CC 064

2

OFF=0, ON=127

 

 

!

When [SND/RTN (MIDI LFO)] is selected at

 

 

 

 

 

 

 

BEAT EFFECT

 

 

 

 

 

 

 

MIC

HI

 

 

 

Control

CC 030

0-127

 

LOW

 

 

Control

CC 031

0-127

 

 

 

 

 

 

 

 

 

 

 

 

 

map

 

SPACE

 

 

Button

CC 105

Trigger/Toggle1

OFF=0, ON=127

SOUND COLOR FX

GATE/COMP

 

 

Button

CC 106

Trigger/Toggle1

OFF=0, ON=127

DUB ECHO

 

 

Button

CC 107

Trigger/Toggle1

OFF=0, ON=127

 

 

 

 

 

 

CRUSH

 

 

Button

CC 086

Trigger/Toggle1

OFF=0, ON=127

 

 

FILTER

 

 

Button

CC 087

Trigger/Toggle1

OFF=0, ON=127

 

 

Fader Start 1

 

 

Button

CC 088

Trigger/Toggle

OFF=0, ON=127

 

Fader Start

Fader Start 2

 

 

Button

CC 089

Trigger/Toggle

OFF=0, ON=127

 

Fader Start 3

 

 

Button

CC 090

Trigger/Toggle

OFF=0, ON=127

 

 

 

 

 

 

Fader Start 4

 

 

Button

CC 093

Trigger/Toggle

OFF=0, ON=127

 

HEADPHONES

MIXING

 

 

Control

CC 027

0-127

 

LEVEL

 

 

Control

CC 026

0-127

 

 

 

 

 

 

Timing Clock

 

 

Timing Clock

 

 

 

 

 

 

 

 

 

Channel fader 1 or crossfader

 

Note 102

BACK CUE = 0, PLAY = 127

 

 

 

 

 

 

 

 

Fader Start operation3

Channel fader 2 or crossfader

 

Note 103

BACK CUE = 0, PLAY = 127

 

Channel fader 3 or crossfader

 

Note 104

BACK CUE = 0, PLAY = 127

 

 

 

 

 

 

 

 

 

 

 

 

Channel fader 4 or crossfader

 

Note 105

BACK CUE = 0, PLAY = 127

 

 

 

 

 

 

 

 

 

 

MIDI

START

 

 

Button

START

 

STOP

 

 

Button

STOP

 

 

 

 

 

1When turning one button on switches another button from on to off, MIDI on and off messages are sent from the two buttons. When there is no button that switches off, only the MIDI on message is sent from the button that was pressed.

2When switched from one position to another position, the MIDI ON and OFF signals are sent respectively from both positions.

When the [START/STOP] button is pressed for over 1 second, MIDI messages corresponding to the positions of the buttons, faders and controls are sent in a bundle (Snapshot). The MIDI Snapshot sends all MIDI messages other than MIDI start and MIDI stop.

3Operation differs depending on the setting of the [CROSS FADER ASSIGN (A, THRU, B)] selector switch.

When the [CROSS FADER ASSIGN (A, THRU, B)] selector switch is set to [THRU]: MIDI messages are sent when the [FADER START] button is set to [ON] and the channel fader is moved away from you from the nearest position towards you and when it is moved back to the nearest position towards you.

When the [CROSS FADER ASSIGN (A, THRU, B)] selector switch is set to [A]: MIDI messages are sent when the [FADER START] button is set to [ON] and the crossfader is moved from the far edge of the [B] side and when it is moved back to the far edge of the [B] side.

When the [CROSS FADER ASSIGN (A, THRU, B)] selector switch is set to [B]: MIDI messages are sent when the [FADER START] button is set to [ON] and the crossfader is moved from the far edge of the [A] side and when it is moved back to the far edge of the [A] side.

En 23

Changing the settings

1 Press the [ON/OFF (UTILITY)] button for over 1 second.

The [USER SETUP] mode setting screen is displayed.

!To display the [CLUB SETUP] mode setting screen, first turn this unit’s power off, then press the [POWER] button while pressing the [ON/OFF (UTILITY)] button.

2 Press the [BEAT c, d] button.

Select the setting item.

3 Press the [TAP] button.

The screen switches to the setting item’s setting value change screen.

4 Press the [BEAT c, d] button.

Change the setting value.

5 Press the [TAP] button.

Enter the setting value.

The previous screen reappears.

!To return to the previous screen without changing the settings, press the [QUANTIZE] button.

6 Press the [ON/OFF (UTILITY)] button.

Close the [USER SETUP] mode setting screen.

!To close the [CLUB SETUP] mode setting screen, press the [POWER] button to turn this unit’s power off.

About the auto standby function

When [Auto Standby] is set to [ON], the standby mode is set automatically if 4 hours pass with all of the conditions shown below met.

That none of this unit’s buttons or controls are operated.

That no audio signals of –10 dB or greater are input to this unit’s input terminals.

That no PRO DJ LINK connections are made.

!When the [LFO FORM (WAKE UP)] button is pressed, the standby mode is canceled.

!This unit is shipped with the auto standby function turned on. If you do not want to use the auto standby function, set [Auto Standby] to [OFF].

About the talk over function

The talk over function has the two modes described below.

[ADV] (advanced talk over): The mid-range only of the sound of channels other than the [MIC] channel is attenuated according to the [Talk Over LEVEL] setting value and output.

dB

Frequency

— [NOR] (normal talk over): The sound of channels other than the [MIC] channel is attenuated according to the [Talk Over LEVEL] setting value and output.

dB

Frequency

Setting preferences

*: Setting upon purchase

 

 

 

Mode

Options settings

Screen display

Setting value

Descriptions

 

Fader Start

F.S.

ON, OFF*

Turns the Fader Start function on and off all at once.

 

MIDI CH

MIDI CH

1* to 16

Sets the MIDI channel.

USER SETUP

MIDI Button Type

MIDI BT

TGL*, TRG

Selects the MIDI signal transmission mode, [TGL (TOGGLE)] or [TRG (TRIGGER)].

Talk Over Mode

TLK MOD

ADV*, NOR

Selects the talk over function’s mode, [ADV(ADVANCED)] or [NOR(NORMAL)].

 

 

Talk Over LEVEL

TLK LVL

–6 dB, –12 dB,

Sets the talk over function’s sound attenuation level.

 

–18 dB*, –24 dB

 

 

 

 

 

Digital Master Out

DOUT LV

–19 dB*, –15 dB,

Sets the maximum level of the sound output from the [DIGITAL MASTER OUT] terminals. 1

 

Level

 

–10 dB, –5 dB

 

 

Digital Master Out

DOUT FS

48 kHz, 96 kHz*

Sets the digital signal’s sampling rate.

 

Sampling Rate

 

 

 

 

 

MASTER ATT.

MST ATT

–6 dB, –3 dB, 0 dB*

Sets the attenuation level of the sound output from the [MASTER1] and [MASTER2] terminals.

CLUB SETUP

Auto Standby

AUTOSTB

ON*, OFF

Turns the auto standby function on and off.

Mic Output To Booth

MIC BTH

ON*, OFF

Sets whether or not to output the microphone’s audio signals from [BOOTH] terminals.

 

 

Monitor

 

 

 

 

PC UTILITY

PC UTLY

ON, OFF*

Sets whether or not to launch the computer’s setting utility software automatically when a USB cable is

 

connected.

 

 

 

 

 

Peak Limiter

PKLIMIT

ON*, OFF

Lessens sudden, unpleasant digital clipping of the master output.

 

Factory Reset

INITIAL

YES, NO*

Restores all the settings to their factory defaults.

1 Note that the output sound may be distorted even if the master level indicator does not light up to the very top.

About the setting utility software

The setting utility can be used to make the checks and settings described below.

Checking the status of this unit’s input selector switches

Setting the audio data output from this unit to the computer

Adjusting the buffer size (when using Windows ASIO)

Checking the version of the driver software

Displaying the setting utility

For Windows

Click [Start] menu > [All Programs] > [Pioneer] > [DJM-900SRT] > [DJM-900SRT Settings Utility].

For Mac OS X

Click [Macintosh HD] icon > [Application] > [Pioneer] > [DJM-900SRT] > [DJM900SRT Settings Utility].

Checking the status of this unit’s input selector switches

Display the setting utility before starting.

24 En

Click the [MIXER INPUT] tab.

Setting the audio data output from this unit to the computer

When Serato DJ is running and using this unit as the default audio device, set the audio data output in Serato DJ.

Display the setting utility before starting.

1 Click the [MIXER OUTPUT] tab.

Adjusting the buffer size (when using Windows ASIO)

If an application using this unit as the default audio device (DJ software, etc.) is running, quit that application before adjusting the buffer size.

Display the setting utility before starting.

Click the [ASIO] tab.

!If the buffer size is made large, drops in audio data (breaks in the sound) occur less easily, but the time lag due to the delay in the transfer of the audio data (latency) increases.

settings the Changing

2 Click the [Mixer Audio Output] pull-down menu.

Select and set the audio data to be output to the computer from the flow of audio signals inside this unit.

CH1

CH2

CH3

CH4

CH1 Control Tone

CH2 Control Tone

CH3 Control Tone

CH4 Control Tone

PHONO1

PHONO1

PHONO1

PHONO1

CH1 Control Tone

CH2 Control Tone

CH3 Control Tone

CH4 Control Tone

CD/LINE1

CD/LINE1

CD/LINE1

CD/LINE1

CH1 Control Tone

CH2 Control Tone

CH3 Control Tone

CH4 Control Tone

DIGITAL1

DIGITAL1

DIGITAL1

DIGITAL1

Post CH1 Fader2

Post CH2 Fader2

Post CH3 Fader2

Post CH4 Fader2

Cross Fader A2

Cross Fader A2

Cross Fader A2

Cross Fader A2

Cross Fader B2

Cross Fader B2

Cross Fader B2

Cross Fader B2

MIC

MIC

MIC

MIC

MIX (REC OUT)2

MIX (REC OUT)2

MIX (REC OUT)2

MIX (REC OUT)2

1The audio data is output with the same volume at which it is input to this unit, regardless of the [USB Output Level] setting.

2When using for applications other than recording, pay attention to the DJ application’s settings so that no audio loops are generated. If audio loops are generated, sound may be input or output at unintended volumes.

3Click the [USB Output Level] pull-down menu.

Adjust the volume of the audio data output from this unit.

!The [USB Output Level] setting is applied equally to all audio data. However, when 1 on the table at step 2 is selected, the audio data is output with the same volume at which it is input to this unit.

!If not enough volume can be achieved with the DJ software’s volume adjustment alone, change the [USB Output Level] setting to adjust the volume of the audio data output from this unit. Note that the sound will be distorted if the volume is raised too high.

Checking the version of the driver software

Display the setting utility before starting.

Click the [About] tab.

Checking the latest information on the driver software

For the latest information on the driver software for exclusive use with this unit, visit our website shown below.

http://pioneerdj.com/support/

!Operation cannot be guaranteed when multiple units of this mixer are connected to a single computer.

En 25

Additional information

Troubleshooting

!Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble cannot be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.

!The player may not operate properly due to static electricity or other external influences. In such cases, normal operation may be restored by unplugging the power cord then plugging it back in.

Problem

Check

Remedy

The power is not turned on.

Is the power cord properly connected?

Plug in the power cord to an AC outlet.

 

 

 

No sound or small sound.

Is the input selector switch set to the proper position?

Switch the input selector switch to switch the channel’s input source. (page 14)

 

 

 

 

Are the connection cables properly connected?

Connect the connection cables properly. (page 11)

 

 

 

 

Are the terminals and plugs dirty?

Clean the terminals and plugs before making connections.

 

Is [MASTER ATT.] set to [–6 dB], etc.?

At the [USER SETUP] screen, switch [MASTER ATT.]. (page 24)

 

 

 

Digital sound cannot be output.

Is the digital audio output’s sampling frequency (fs) suited

On the [CLUB SETUP] screen, set [Digital Master Out Sampling Rate] according to the

 

for the specifications of the connected device?

specifications of the connected equipment. (page 24)

 

 

 

Distorted sound.

Is the sound level output from the [MASTER] channel

Adjust the [MASTER LEVEL] control so that the master channel level indicator lights at

 

appropriately set?

around [0 dB] at the peak level. (Page 14)

 

 

Set [MASTER ATT.] to [–3 dB] or [–6 dB]. (page 24)

Is the level of audio input to each channel properly set?

Adjust the [TRIM] control so that the channel level indicator lights at about [0 dB] at the peak level. (Page 14)

Can’t crossfade.

Are the [CROSS FADER ASSIGN (A, THRU, B)] selector

Set the [CROSS FADER ASSIGN (A, THRU, B)] selector switches for the different channels

 

switches properly set?

properly. (Page 14)

 

 

 

Can’t fader start a DJ player.

Is [FADER START] set to [OFF]?

At the [USER SETUP] screen, set [FADER START] to [ON]. (page 24)

 

Is the DJ player properly connected to the [LINK] terminal?

Connect the DJ player to the [LINK] terminal properly using a LAN cable. (page 11)

 

 

 

 

Are the audio cables properly connected?

Connect this unit’s audio input terminals and the DJ player’s audio output terminals by audio

 

 

cable. (page 11)

Is the DJ player’s player number properly set?

Set the DJ player’s player number to the same number as the channel to which the audio cable is connected.

[BEAT EFFECTS] does not work.

Is the effect channel selector switch set to the proper

Turn the effect channel selector switch to select the channel to which you want to apply the

 

position?

effect.

 

 

 

[SOUND COLOR FX] does not work.

Is the [COLOR] control set to an appropriate position?

Turn the [COLOR] control clockwise or counterclockwise. (page 16)

Can’t use an external effector.

Is the [ON/OFF] button for [BEAT EFFECTS] set to [ON]?

Press the [ON/OFF] button for [BEAT EFFECTS] to set [SND/RTN] to [ON]. (page 16)

 

 

 

 

Is the external effector properly connected to the [SEND]

Connect the external effector to the [SEND] and [RETURN] terminals. (page 11)

 

or [RETURN] terminal?

 

Distorted sound from an external effector.

Is the external effector’s audio output level set to an appropriate level?

Adjust the external effector’s audio output level.

Tempo (BPM) cannot be measured or measurement value of tempo (BPM) is implausible.

Is the audio input level too high or too low?

Adjust the [TRIM] control so that the channel level indicator lights at about [0 dB] at the peak level. (Page 14)

For some tracks, it may not be possible to measure the tempo (BPM). Use the [TAP] button to input the tempo manually. (page 16)

Measured tempo (BPM) differs from tempo —

The values may differ slightly due to the different ways in which the BPM is measured.

indicated on CD.

 

MIDI sequencer does not synchronize.

Is the MIDI sequencer’s sync mode set to Slave?

Set the MIDI sequencer’s sync mode to Slave.

 

 

Does the MIDI sequencer you are using support MIDI

MIDI sequencers not supporting MIDI timing clocks cannot be synchronized.

timing clocks?

 

MIDI control does not work.

Is the MIDI channel turned on?

Press the [ON/OFF] button for [MIDI]. (page 17)

Are the MIDI settings properly set?

To operate DJ software with this unit, this unit’s MIDI messages must be assigned to the

 

DJ software you are using. For instructions on assigning messages, see your DJ software’s

 

operating instructions.

This unit is not recognized after it has been

Is the driver software properly installed on your computer? Install the driver software. If it is already installed, reinstall it. (page 6)

connected to a computer.

 

USB indicator is off or flashing.

 

Sound of a computer cannot be output from this unit.

Are this unit and computer properly connected?

Connect this unit and the computer directly using the included USB cable. (page 12)

Are the audio output device settings properly set?

Select this unit with the audio output device settings. For instructions on making settings for

 

your application, see your application’s operating instructions.

 

Is the input selector switch set to the proper position?

Set the input selector switch to the [USB] position. (Page 14)

 

 

 

Effect sound cannot be monitored even

The circuit that generates the echo for the [ECHO], [REVERB], [ROLL], [SLIP ROLL] and

when the [CUE] button for [BEAT EFFECTS]

 

[REV ROLL] effect sounds is positioned after the effect circuit, so the effect sound cannot be

is pressed.

 

monitored. This is not a malfunction.

 

 

 

Sound is distorted when an analog player is

Have you connected an analog player with a built-in phono

Connect the analog player with built-in phono equalizer to the [CD/LINE] terminals. (page 11)

connected to this unit’s [PHONO] terminals.

equalizer?

If the analog player with built-in phono equalizer has a PHONO/LINE selector switch, switch

Or, lighting of the channel level indicator

 

 

it to PHONO.

does not change even when the [TRIM]

 

 

 

Is an audio interface for computers connected between

If the output of the audio interface for computers is line level, connect it to the [CD/LINE]

control is turned.

the analog player and this unit?

terminals. (page 11)

 

 

 

If the analog player has a PHONO/LINE selector switch, switch it to PHONO.

 

 

 

26 En

Block Diagram

MIC1

 

 

 

 

 

MIC1 LEVEL

 

 

LAN

 

 

 

 

 

MIC2 LEVEL

ADC

I/Fμcom

ETHER SW IC

MIC2

Ether

 

 

 

 

 

 

DIGITAL

CD/LINE

TRIM

 

 

MASTER

 

SRC

DIT

 

 

 

 

PHONO

 

 

 

 

 

 

 

ADC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PHONES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DAC

 

 

 

 

 

Control Tone

 

 

 

 

 

 

LAN

 

 

 

 

Digital MASTER

 

 

 

 

 

 

 

 

 

 

 

 

ADC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIGITAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MASTER 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MIC

 

 

 

 

PHONES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CD/LINE

 

TRIM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DAC

 

 

 

 

 

 

 

 

 

 

 

 

 

ADC

 

CH1_Analog

 

 

 

MASTER

 

 

 

 

 

 

 

PHONO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MASTER 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MUTE

CH2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Control Tone

 

 

 

 

 

 

CH2_Analog

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ADC

 

 

 

 

 

BOOTH

 

 

 

 

 

 

 

DIGITAL

DIR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MUTE

BOOTH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DAC

 

 

 

 

 

 

 

 

 

 

 

 

 

CH3_Analog

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CD/LINE

 

TRIM

 

 

 

 

 

 

 

 

 

 

D SP

 

REC

 

 

 

MUTE

REC

 

 

 

 

 

 

 

 

 

ADC

 

CH4_Analog

 

 

 

 

 

 

DAC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PHONO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SEND

 

 

 

MUTE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SEND

 

 

Control Tone

 

 

 

 

 

 

RETURN

 

 

 

 

 

 

 

DAC

 

 

 

 

 

 

 

 

ADC

 

 

 

 

 

 

 

 

 

 

 

 

 

DIGITAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIR

 

 

 

 

 

 

 

 

CH_1_Digital/USB1/2

 

 

 

USB1/2

 

 

 

SRC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CD/LINE

 

TRIM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ADC

 

CH_2_Digital/USB3/4

 

 

 

USB3/4

 

 

 

SRC

 

 

 

PHONO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Control Tone

 

 

 

 

 

 

CH_3_Digital/USB5/6

 

 

 

USB5/6

 

 

 

 

 

 

 

 

 

 

 

 

 

ADC

 

 

 

 

 

 

 

SRC

 

 

 

DIGITAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ADC

 

CH_4_Digital/USB7/8

 

 

 

USB7/8

 

 

 

SRC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RETURN

 

 

 

 

CH1 Digital IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH2 Digital IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH3 Digital IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH4 Digital IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH1 USB1/2 IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB

 

 

 

 

 

 

 

 

 

 

 

 

SRC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH2 USB3/4 IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB

Type B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SRC

 

 

 

 

 

 

 

 

 

 

 

I/Fμcom

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH3 USB5/6 IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SRC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH4 USB7/8 IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Control Tone

 

 

 

SRC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Control Tone

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Control Tone

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH1 USB1/2 OUT

 

 

Control Tone

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH2 USB3/4 OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH3 USB5/6 OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH4 USB7/8 OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CHx in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Booth

 

 

 

 

CHx Control Tone

 

 

 

 

 

 

Post CHx Fader

 

 

 

 

 

 

Level

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Analog_PHONO

Phono

 

BPM Detect CHx Select

 

 

 

Level meter CHx

 

 

 

 

 

 

MIC_Out

 

 

 

 

Booth Out

 

 

AMP

 

 

 

 

 

 

 

CH Fader

 

CF Assign

 

 

 

 

 

SEL

 

 

 

 

 

 

 

 

3Band

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Analog_CD LINE

 

SOUND

BEAT

SOUND

BEAT

CUE

SOUND

BEAT

Thru

 

 

 

 

MIC Output

 

 

 

 

 

COLOR

EQ/

 

COLOR

EFFECT

Monitor

COLOR

EFFECT

CF A

 

 

 

 

to Booth Monitor

 

 

 

 

 

 

 

EFFECT

ISOLATOR

EFFECT EFFECT

EFFECT

 

 

 

 

On/Off SW

 

 

 

 

 

 

Digital Trim

CHx

CHx

CHx

CHx

CHx

CHx

CHx

CHx

CF B

 

 

 

 

 

 

 

 

 

 

 

 

 

Send/

 

 

 

3posi

 

 

 

 

 

MIX (REC OUT)

 

 

 

 

 

 

 

 

2posi

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Digital/USB

 

 

 

 

Return

 

 

CH

 

 

 

 

 

 

 

 

 

 

REC out

 

 

 

 

 

 

 

CHx

 

CHx _CUE

Fader

 

 

 

 

 

 

 

 

 

Level meter Master

 

 

 

 

 

 

 

 

 

 

Curve

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Switch

 

 

 

 

 

 

 

 

Master

 

 

 

 

 

 

CH1-4 COMMON

 

 

 

 

 

 

 

3posi

 

 

 

 

 

 

 

 

Boost

 

Digital out

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TalkOver ON/OFF

 

 

Level

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Master

 

Master

 

 

 

 

Link

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ATT

Master

LINK in

 

 

 

 

 

 

 

Assign Thru

 

 

 

Master

 

 

 

CUE

Limiter

CUE

 

 

 

 

 

BPM Detect CF A

 

BPMICDetectMonitorMasterSW

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Balance

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH1-4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Link_CUE

 

 

 

Cross

 

 

 

 

BEAT

Master

 

Talk

 

 

Master_CUE

 

 

 

 

 

 

 

 

 

 

Fader

BEAT

 

 

 

EFFECT

Mono/

 

 

 

 

 

 

 

Return in

BEAT

 

 

 

 

 

 

EFFECT

 

 

 

Master

STEREO

 

Over

 

 

 

 

H.P. out

Send out

Effect

 

 

 

 

 

 

CF A

 

 

 

Send/

2posi

 

 

 

 

 

 

 

 

 

(SND/RTN)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Assign A

 

 

Send/

 

 

 

Return

 

Talk Over

Talk

 

CHx Control Tone

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Boost

USB Common out

 

 

 

 

 

 

CHx

 

 

Return

 

 

 

Master

 

 

Mode

Over

 

 

 

 

 

 

 

 

 

 

 

CF A

Cross Fader A

 

 

 

 

 

Advanced

Level

 

Post CHx Fader

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

/Normal

 

Mixer

 

 

 

 

 

 

 

 

 

 

 

 

BEAT

 

 

 

 

 

 

2para

4para

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cross Fader A

Audio

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EFFECT

 

 

 

 

 

 

 

 

 

 

Output

 

 

 

 

 

 

 

 

 

 

Cross

CF B

 

 

 

 

 

CHx_CUE

 

 

 

Cross Fader B

Select

 

 

 

 

 

 

 

 

 

Assign B

Send/

Cross Fader B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fader

 

 

 

 

 

 

HP Level

MIC

 

 

 

 

 

 

 

 

 

 

CHx

Return

 

BPM Detect MIC

 

 

Effect_CUE

 

 

 

 

 

 

 

 

 

 

 

Curve

 

 

 

Mono Split/

 

 

 

 

 

 

 

 

 

 

 

 

Switch

CF B

 

 

 

 

 

Link_CUE

 

Stereo

 

MIX (REC OUT)

 

 

 

 

 

 

 

 

 

 

 

 

3posi

 

 

 

MIC

Master

SWITCH

 

 

 

 

 

 

 

 

 

 

 

 

BPM Detect CF B

 

 

 

Balance

Master_CUE

& MIXING

 

CH1-4 COMMON

 

 

 

 

 

 

2Band

 

 

 

 

Off

BEAT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MIC1/2 in

MIC EQ

 

MIC In

 

 

 

 

On

EFFECT

 

 

 

 

 

MIC_Out

 

 

 

 

 

 

 

 

MIC1,2

MIC

 

 

 

MIC 1,2

TalkOver

MIC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Level

 

TalkOver ON/OFF

 

3posi

Send/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MIC1,2 COMMON

FILTER

detect

 

 

 

MIX

 

Return

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MIC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[BEAT EFFECT (SND/RTN)]

Effect CH Select

CHx

 

CF A/B

 

MIC

 

Master

No Cable

Return Level

Effect SW

RETURN

SEL

Cable Exist

 

CableCheck

 

[BEAT EFFECT(Others)]

 

 

Effect CH Select

[Mono Split / Stereo SWITCH & MIXING]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Effect CH Select

 

Effect SW

Effect Out

CHx Cue On/Off SW

CUE

 

 

 

 

 

CHx

BEAT

CHx

Mixing

L

 

 

 

 

Level Depth

CHx_CUE

 

 

 

SEND Out

CF A/B

EFFECT

CF A/B

 

 

 

Mono Split

 

MIC

Processing

 

MIC

Effect Cue On/Off SW

 

 

 

H.P. MIX L Out

 

 

 

R

 

Effect CH Select

 

 

 

 

Master

 

 

Master

Effect_CUE

 

SEL

Stereo

 

Effect Out

 

 

 

Effect_CUE

 

 

 

 

 

 

 

Link Cue On/Off SW

 

 

MONO SPLIT/

 

CHx

 

 

 

MIXING

 

 

 

 

 

 

 

 

CF A/B

 

 

 

 

Link_CUE

STEREO SWITCH

 

 

 

 

 

 

 

MIC

 

 

 

 

 

 

2posi

 

 

 

 

 

 

Master

 

 

Master

 

 

 

 

 

 

 

 

 

 

 

 

 

Master Cue On/Off SW

Mixing

 

 

Mono Split

 

 

 

 

 

 

L

 

 

Effect_CUE

 

 

 

 

 

 

 

 

 

 

 

 

Master_CUE

 

SEL

Stereo

H.P. MIX R Out

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R

 

 

 

 

 

 

 

 

 

 

 

 

information Additional

En 27

Acquiring the manual

The operating instructions may be in a file in PDF format. Adobe® Reader® must be installed to read files in PDF format. If you do not have Adobe Reader, please install it from the download link on the CD-ROM’s menu screen.

Downloading the latest versions of the operating instructions and the Quick Start Guide - Serato DJ Edition

1 Insert the CD-ROM into the computer’s CD drive.

The CD-ROM menu is displayed.

If the CD-ROM’s menu does not appear when the CD-ROM is inserted, perform the operations below.

!For Windows

From the [Start] menu – [Computer] (or [My Computer]), open the CD drive and double-click the [CD_menu.exe] icon.

!For Mac OS X

In Finder, double-click the [CD_menu.app] icon directly.

2When the CD-ROM’s menu is displayed, select [DJM900SRT: Download the Operating Instructions (PDF file)], then click [Start].

3“An internet environment is required to access the site. Connected to the internet?” is displayed. Click [Yes].

The web browser is launched and the Pioneer DJ support site is displayed. http://pioneerdj.com/support/

4On the Pioneer DJ support site, click “Manuals” under “DJM-900SRT”.

5From the download page, click the language for the documents you require.

Downloading of the operating instructions/Quick Start Guide - Serato DJ Edition starts.

Downloading the Serato DJ software manual

1 Insert the CD-ROM into the computer’s CD drive.

The CD-ROM menu is displayed.

If the CD-ROM’s menu does not appear when the CD-ROM is inserted, perform the operations below.

!For Windows

From the [Start] menu – [Computer] (or [My Computer]), open the CD drive and double-click the [CD_menu.exe] icon.

!For Mac OS X

In Finder, double-click the [CD_menu.app] icon directly.

2When the CD-ROM’s menu is displayed, select [Serato DJ: Download the Software Manual (PDF file)], then click [Start].

3“An internet environment is required to access the site. Connected to the internet?” is displayed. Click [Yes].

The web browser is launched and the Pioneer DJ support site is displayed.

4 Click [Software Info] under [DJM-900SRT] on the Pioneer DJ support site.

[Serato DJ Support Information] is displayed.

5 Click the link to the Serato DJ download page.

The Serato DJ download page is displayed. http://serato.com/

6 Log in to your “Serato.com” user account.

Input the e-mail address and password you have registered to log in to “Serato.com”.

7 From “More Downloads” on the right side of the download page, click “Serato DJ x.x User Manual”.

Downloading of the Serato DJ software manual starts.

About trademarks and registered trademarks

!Pioneer and rekordbox are trademarks or registered trademarks of the PIONEER CORPORATION.

!Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

!Apple, Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.

!ASIO is a trademark of Steinberg Media Technologies GmbH.

!Serato DJ, Scratch Live, ITCH and Serato DJ Intro are registered trademarks of Serato.

The names of companies and products mentioned herein are the trademarks of their respective owners.

28 En

Specifications

General

Power requirements.................................................................................

AC 120 V, 60 Hz

Power consumption...................................................................................................

42 W

Power consumption (standby)..................................................................................

0.4 W

Main unit weight.........................................................................................

7.1 kg (15.7 lb)

Max. dimensions.......................................

331 mm (W) × 107.9 mm (H) × 404 mm (D)

 

(13 in. (W) × 4.2 in. (H) × 15.9 in. (D))

Tolerable operating temperature.............................

+5 °C to +35 °C (+41 °F to +95 °F)

Tolerable operating humidity...........................................

5 % to 85 % (no condensation)

Audio Section

Sampling rate ..........................................................................................................

96 kHz

MASTER D/A converter...........................................................................................

32 bits

Other A/D and D/A converters................................................................................

24 bits

Frequency characteristic

 

CD/LINE................................................................................................

20 Hz to 20 kHz

S/N ratio (rated output)

 

PHONO................................................................................................................

88 dB

CD/LINE.............................................................................................................

105 dB

MIC1, MIC2.........................................................................................................

84 dB

Total harmonic distortion (CD/LINE MASTER1).............................................

0.005 %

Standard input level / Input impedance

 

PHONO.................................................................................................

–52 dBu/47 kW

CD/LINE.................................................................................................

–12 dBu/47 kW

MIC1, MIC2............................................................................................

–52 dBu/8 kW

RETURN................................................................................................

–12 dBu/47 kW

Standard output level / Load impedance / Output impedance

MASTER1........................................................................

+8 dBu/10 kW/5 W or lower

MASTER2......................................................................

+2 dBu/10 kW/22 W or lower

REC OUT.........................................................................

–8 dBu/10 kW/22 W or lower

BOOTH...........................................................................

+8 dBu/10 kW/1 kW or lower

SEND.............................................................................

–12 dBu/10 kW/1 kW or lower

PHONES..........................................................................

+8.5 dBu/32 W/1 W or lower

Rated output level / Load impedance

 

MASTER1...........................................................................................

+26 dBu/10 kW

MASTER2...........................................................................................

+22 dBu/10 kW

Crosstalk (LINE).........................................................................................................

82 dB

Channel equalizer characteristic

 

HI.........................................................................................

–26 dB to +6 dB (13 kHz)

MID.......................................................................................

–26 dB to +6 dB (1 kHz)

LOW......................................................................................

–26 dB to +6 dB (70 Hz)

Microphone equalizer characteristic

 

HI.......................................................................................

–12 dB to +12 dB (10 kHz)

LOW..................................................................................

–12 dB to +12 dB (100 Hz)

Input / Output terminals

PHONO input terminal

 

RCA pin jacks......................................................................................................

4 sets

CD/LINE input terminal

 

RCA pin jacks......................................................................................................

4 sets

MIC1 input terminal (XLR/TRS)

 

XLR connector/phone jack (Ø 6.3 mm)...............................................................

1 set

MIC2 input terminal (TRS)

 

Phone jack (Ø 6.3 mm).........................................................................................

1 set

RETURN Input terminals (TS)

 

Phone jack (Ø 6.3 mm).........................................................................................

1 set

DIGITAL IN coaxial input terminal

 

RCA pin jacks......................................................................................................

4 sets

MASTER output terminal

 

XLR connector......................................................................................................

1 set

RCA pin jacks.......................................................................................................

1 set

BOOTH output terminal (TRS)

 

Phone jack (Ø 6.3 mm).........................................................................................

1 set

REC OUT output terminal

 

RCA pin jacks.......................................................................................................

1 set

SEND output terminal (TS)

 

Phone jack (Ø 6.3 mm).........................................................................................

1 set

DIGITAL MASTER OUT coaxial output terminal

 

RCA pin jacks.......................................................................................................

1 set

MIDI OUT terminal

 

5P DIN...................................................................................................................

1 set

PHONES output terminal

 

Stereo phone jack (Ø 6.3 mm).............................................................................

1 set

USB terminal

 

B type....................................................................................................................

1 set

LINK terminal

 

LAN terminal (100Base-TX)..................................................................................

1 set

!The specifications and design of this product are subject to change without notice.

!If you should require a new CONTROL CD or CONTROL VINYL due to wear, breakage, etc., see below.

Note that these parts are expendables and not covered by the warranty, even within the warranty period.

CONTROL CD

See the information on the Pioneer DJ support site (http://pioneerdj.com/ support/).

CONTROL VINYL

Use a shop that handles Serato DJ products or an online shop such as that of Serato (http://serato.com/).

information Additional

En 29

30 En

PIONEER ELECTRONICS (USA) INC.

LIMITED WARRANTY

WARRANTY VALID ONLY IN THE U.S.A. AND CANADA

WARRANTY

Pioneer Electronics (USA) Inc. (PUSA) warrants that products distributed by PUSA in the U.S.A. and Canada that fail to function properly under normal use due to a manufacturing defect when installed and operated according to the owner’s manual enclosed with the unit will be repaired or replaced with a unit of comparable value, at the option of PUSA, without charge to you for parts or actual repair work. Parts supplied under this warranty may be new or rebuilt at the option of PUSA.

THIS LIMITEDWARRANTY APPLIESTOTHE ORIGINAL OR ANY SUBSEQUENT OWNER OFTHIS PIONEER PRODUCT DURINGTHEWARRANTY PERIOD PROVIDEDTHE PRODUCT WAS PURCHASED FROM AN AUTHORIZED PIONEER DISTRIBUTOR/DEALER INTHE U.S.A. OR CANADA. YOU WILL BE REQUIREDTO PROVIDE A SALES RECEIPT OR OTHERVALID PROOF OF PURCHASE SHOWINGTHE DATE OF ORIGINAL PURCHASE OR, IF RENTED,YOUR RENTAL CONTRACT SHOWINGTHE PLACE AND DATE OF FIRST RENTAL. IN THE EVENT SERVICE IS REQUIRED, THE PRODUCT MUST BE DELIVERED WITHIN THE WARRANTY PERIOD, TRANSPORTATION PREPAID, ONLY FROM WITHINTHE U.S.A. AS EXPLAINED INTHIS DOCUMENT. YOU WILL BE RESPONSIBLE FOR REMOVAL AND INSTALLATION OFTHE PRODUCT. PUSAWILL PAYTO RETURNTHE REPAIRED OR REPLACEMENT PRODUCTTOYOUWITHINTHE U.S.A.

PRODUCT WARRANTY PERIOD

Parts

Labor

DJ Audio and Video ...................................................................................................................................................................................

1 Year

1 Year

The warranty period for retail customers who rent the product commences upon the date product is first put into use (a) during the rental period or (b) retail sale, whichever occurs first.

WHAT IS NOT COVERED

IFTHIS PRODUCTWAS PURCHASED FROM AN UNAUTHORIZED DISTRIBUTOR,THERE ARE NOWARRANTIES, EXPRESS OR IMPLIED, INCLUDINGTHE IMPLIEDWARRANTY OF MERCHANTABILITY ANDTHE IMPLIEDWARRANTY OF FITNESS FOR A PARTICULAR PURPOSE ANDTHIS PRODUCT IS SOLD STRICTLY“AS IS”AND“WITH ALL FAULTS".

PIONEER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL AND/OR INCIDENTAL DAMAGES.

THIS WARRANTY DOES NOT APPLY IF THE PRODUCT HAS BEEN SUBJECTED TO POWER IN EXCESS OF ITS PUBLISHED POWER RATING.

THISWARRANTYDOESNOTCOVERTHECABINETORANYAPPEARANCEITEM,USERATTACHEDANTENNA,ANYDAMAGETORECORDSORRECORDINGTAPESORDISCS,ANY DAMAGETOTHE PRODUCT RESULTING FROM ALTERATIONS, MODIFICATIONS NOT AUTHORIZED INWRITING BY PIONEER,ACCIDENT,MISUSE OR ABUSE,DAMAGE DUETO LIGHTNINGORTOPOWERSURGES,SUBSEQUENTDAMAGEFROMLEAKING,DAMAGEFROMINOPERATIVEBATTERIES,ORTHEUSEOFBATTERIESNOTCONFORMINGTOTHOSE SPECIFIEDINTHEOWNER’SMANUAL.

THISWARRANTY DOES NOT COVERTHE COST OF PARTS OR LABORWHICHWOULD BE OTHERWISE PROVIDEDWITHOUT CHARGE UNDERTHISWARRANTY OBTAINED FROM ANYSOURCEOTHERTHANAPIONEERAUTHORIZEDSERVICECOMPANYOROTHERDESIGNATEDLOCATION.THISWARRANTYDOESNOTCOVERDEFECTSORDAMAGECAUSED BYTHEUSEOFUNAUTHORIZEDPARTSORLABORORFROMIMPROPERMAINTENANCE.

ALTERED, DEFACED, OR REMOVED SERIAL NUMBERS VOID THIS ENTIRE WARRANTY

NO OTHER WARRANTIES

PIONEER LIMITS ITS OBLIGATIONS UNDER ANY IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO,THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,TO A PERIOD NOT TO EXCEED THE WARRANTY PERIOD. NO WARRANTIES SHALL APPLY AFTER THE WARRANTY PERIOD. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND SOME STATES DO NOT ALLOW THE EXCLUSIONS OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SOTHE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLYTOYOU. THISWARRANTY GIVESYOU SPECIFIC LEGAL RIGHTS ANDYOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.

TO OBTAIN SERVICE

PUSA has appointed a number of Authorized Service Companies throughout the U.S.A. and Canada should your product require service. To receive warranty service you need to present your sales receipt or, if rented, your rental contract showing place and date of original owner’s transaction. If shipping the unit you will need to package it carefully and send it, transportation prepaid by a traceable, insured method, to an Authorized Service Company. Package the product using adequate padding material to prevent damage in transit. The original container is ideal for this purpose. Include your name, address and telephone number where you can be reached during business hours.

On all complaints and concerns in the U.S.A. and Canada call Customer Support at 1-800-872-4159.

For hook-up and operation of your unit or to locate an Authorized Service Company, please call or write:

CUSTOMER SUPPORT

PIONEER ELECTRONICS (USA) INC.

P.O. BOX 1720

LONG BEACH, CALIFORNIA 90801 1-800-872-4159 http://www.pioneerelectronics.com

DISPUTE RESOLUTION

Following our response to any initial request to Customer Support, should a dispute arise between you and Pioneer, Pioneer makes available its Complaint Resolution Program to resolve the dispute. The Complaint Resolution Program is available to you without charge. You are required to use the Complaint Resolution Program before you exercise any rights under, or seek any remedies, created by Title I of the Magnuson-Moss Warranty-Federal Trade Commission Improvement Act, 15 U.S.C. 2301 et seq.

To use the Complaint Resolution Program call 1-800-872-4159 and explain to the customer service representative the problem you are experiencing, steps you have taken to have the product repaired during the warranty period and the name of the authorized Distributor/Dealer from whom the Pioneer product was purchased. After the complaint has been explained to the representative, a resolution number will be issued. Within 40 days of receiving your complaint, Pioneer will investigate the dispute and will either:

(1) respond to your complaint in writing informing you what action Pioneer will take, and in what time period, to resolve the dispute; or (2) respond to your complaint in writing informing you why it will not take any action.

RECORD THE PLACE AND DATE OF PURCHASE FOR FUTURE REFERENCE

Model No. ____________________________________________ Serial No. _________________________________________ Purchase Date ______________________

Purchased From _____________________________________________________________________________________________________________________________

KEEP THIS INFORMATION AND YOUR SALES RECEIPT IN A SAFE PLACE

UCP0212

information Additional

En 31

To register your product, find the nearest authorized service location, to purchase replacement parts, operating instructions, or accessories, please go to one of following URLs :

Pour enregistrer votre produit, trouver le service après-vente agréé le plus proche et pour acheter des pièces de rechange, des modes d’emploi ou des accessoires, reportez-vous aux URL suivantes :

In the USA & Canada/Aux Etats-Unis & Canada

http://www.pioneerelectronics.com

S018_B1_EnFr_PSV

© 2013 PIONEER CORPORATION. All rights reserved.

PIONEER CORPORATION

1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan

PIONEER ELECTRONICS (USA) INC.

P.O. BOX 1720, Long Beach, California 90801-1720, U.S.A. TEL: (800) 421-1404

K002_PSV_CU

Printed in

 

<DRB1702-A>