CD RDS RECEIVER AUTORADIO CD RDS
REPRODUCTOR DE CD CON RECEPTOR RDS
DEH-X4900BT DEH-X3900BT DEH-X3910BT
Español Français English
Owner’s Manual
Mode d’emploi
Manual de instrucciones
Important (Serial number)
The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.
Important (Numéro de série)
Le numéro de série se trouve au bas de cet appareil. Pour votre sécurité et votre commodité, veillez à noter ce numéro sur la carte de garantie fournie.
Importante (Número de serie)
El número de serie se encuentra en la parte inferior de esta unidad. Por su propia seguridad y comodidad, asegúrese de anotar este número en la tarjeta de garantía que se adjunta.
Table of Contents |
|
Before You Start....................................................................................... |
2 |
Getting Started........................................................................................ |
3 |
Radio.......................................................................................................... |
6 |
CD/USB/iPod/AUX................................................................................... |
7 |
Bluetooth.................................................................................................. |
8 |
App Mode ............................................................................................... |
11 |
Pandora®................................................................................................. |
12 |
Spotify® ................................................................................................... |
13 |
Using Pioneer ARC APP........................................................................ |
14 |
Settings ................................................................................................... |
14 |
FUNCTION settings .............................................................................. |
15 |
AUDIO settings...................................................................................... |
15 |
SYSTEM settings ................................................................................... |
16 |
ILLUMINATION settings....................................................................... |
18 |
MIXTRAX settings ................................................................................. |
18 |
Connections/Installation ..................................................................... |
19 |
Additional Information ........................................................................ |
22 |
About this manual:
•In the following instructions, a USB memory or USB audio player are referred to as “USB device”.
•In this manual, iPod and iPhone are referred to as “iPod”.
Before You Start
Thank you for purchasing this PIONEER product
To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference.
FCC ID: AJDK071
MODEL NO.: DEH-X4900BT/DEH-X3900BT/DEH-X3910BT IC: 775E-K071
This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of this device.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
The Bluetooth antenna cannot be removed (or replaced) by user.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).
Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.
Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
The Safety of Your Ears is in Your Hands
Get the most out of your equipment by playing it at a safe level—a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving.
2 En
Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
ESTABLISH A SAFE LEVEL:
•Set your volume control at a low setting.
•Slowly increase the sound until you can hear it comfortably and clearly, without distortion.
•Once you have established a comfortable sound level, set the dial and leave it there.
BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:
•Do not turn up the volume so high that you can’t hear what’s around you.
•Use caution or temporarily discontinue use in potentially hazardous situations.
•Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas.
WARNING
•Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards.
•Do not attempt to operate the unit while driving. Make sure to pull off the road and park your vehicle in a safe location before attempting to use the controls on the device.
CAUTION:
USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION:
THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.
CAUTION
•Do not allow this unit to come into contact with moisture and/or liquids. Electrical shock could result. Also, damage to this unit, smoke, and overheating could result from contact with liquids.
•Always keep the volume low enough to hear outside sounds.
•This product is evaluated in moderate and tropical climate condition under the Audio, video and similar electronic apparatus - Safety requirements, IEC 60065.
CAUTION
This product is a class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007.
After-sales service for Pioneer products
Please contact the dealer, distributor from where you purchased this unit or the authorized PIONEER Service Station for after-sales service or any other information. In case the necessary information is not available, please contact the companies listed below:
Please do not ship your unit to the companies at the addresses listed below for repair without contacting them in advance.
U.S.A. and CANADA
Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.O. Box 1760
Long Beach, CA 90801-1760 800-421-1404
For warranty information please see the Limited Warranty sheet included with this unit.
Getting Started
Basic operation
DEH-X4900BT
M.C. (multi-control) dial |
|
USB port |
Disc loading slot |
|
(eject) |
|
SRC (source)/OFF |
Display window |
DISP (display) |
BAND/ |
Detach button |
|
|
AUX input jack (3.5 mm stereo jack) |
English
En 3
DEH-X3900BT/X3910BT |
|
|
M.C. (multi-control) dial |
|
USB port |
(eject) |
Disc loading slot |
|
SRC (source)/OFF |
Display window |
|
|
BAND/ |
Detach button |
DISP (display) |
|
|
AUX input jack (3.5 mm stereo jack)
Remote Control
VOLUME +/–
/
MUTE
Purpose |
|
|
Operation |
||
|
Head Unit |
|
Remote Control |
||
|
|
|
|||
Adjust the volume |
Turn the M.C. dial. |
|
Press VOLUME + or –. |
||
|
|
|
|
|
Press MUTE to mute the |
|
|
|
|
|
unit. Press MUTE again or |
|
|
|
|
|
press VOLUME + or – to |
|
|
|
|
|
unmute. |
|
|
|
|
||
Select a source |
Press SRC/OFF repeatedly. |
|
Press SRC repeatedly. |
||
|
|
|
|
||
Change the display |
Press DISP repeatedly. |
|
Press DISP repeatedly. |
||
information |
|
|
|
|
|
|
|
|
|
|
|
Return to the previous |
Press BAND/ |
. |
|
Press / to select the |
|
display/list |
|
|
|
|
next/previous folder. |
|
|
|
|
||
Return to the normal display |
Press and hold BAND/ |
. |
– |
||
from the menu |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Answering a call |
Press |
. |
|
|
Press . |
|
|
|
|
|
|
Ending a call |
Press |
. |
|
|
Press . |
|
|
|
|
|
|
*When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off.
Display indication
The following indication may vary depending on the unit.
SRC (source) |
DISP (display) |
Indication |
Description |
|
|
Appears when a lower tier of the menu or folder exists.
|
|
|
|
Appears when a Bluetooth telephone is connected to this unit by HFP |
|
|
|
|
(Hands Free Profile) (page 8) and flashes while the telephone is on hold. |
|
|
|
|
|
|
|
|
|
Appears when a Bluetooth audio player is connected to this unit by A2DP |
Frequently used operations |
|
|
||
|
|
(Advanced Audio Distribution Profile) (page 8). |
||
The available buttons vary depending on the unit. |
|
|
||
|
|
|
||
|
|
Appears when the button is pressed. |
||
|
|
|
|
|
Purpose |
Operation |
|
Appears when the local seek tuning function is set (page 15). |
|
Head Unit |
Remote Control |
|
|
|
|
|
Appears when the sound retriever function is set (page 15). |
||
Turn on the power* |
Press SRC/OFF to turn on |
Press SRC to turn on the |
|
|
|
Appears when random/shuffle play is set (except when BT AUDIO is |
|||
|
the power. |
power. |
|
|
|
|
selected as the source). |
||
|
Press and hold SRC/OFF to |
Press and hold SRC to turn |
|
|
|
|
|
||
|
turn off the power. |
off the power. |
|
Appears when repeat play is set (except when BT AUDIO is selected as the |
|
|
|
|
source). |
|
|
|
||
|
|
|
|
|
|
|
|
|
Appears when the iPod control function is set (page 8). |
|
|
|
|
|
|
|
|
|
Appears when a Bluetooth connection is made (page 8). |
4 En
Detaching the front panel
Detach the front panel to prevent theft. Remove any cables and devices attached to the front panel and turn off the unit before detaching it.
Detach |
Attach |
Important
•Avoid subjecting the front panel to excessive shock.
•Keep the front panel out of direct sunlight and high temperatures.
•Always store the detached front panel in a protective case or bag.
Preparing the remote control
Remove the insulation sheet before use.
How to replace the battery
Insert the CR2025 (3 V) battery with the plus (+) and minus (–) poles orientated properly.
WARNING
•Do not ingest the battery, Chemical Burn Hazard
(The remote control supplied with) This product contains a coin/button cell battery. If the coin/ button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• Do not expose the battery or remote control to excessive heat such as direct sunlight or fire.
CAUTION
•There is a potential danger of explosion if the battery is incorrectly replaced. When replacing the battery, replace it with the same type.
•Do not handle or store the battery with metallic tools or objects.
•If the battery leaks, remove the battery and wipe the remote control completely clean. Then install a new battery.
•When disposing of used batteries, please comply with governmental regulations or environmental public institutions’ rules that apply in your country/area.
•“Perchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate. (Applicable to California, U.S.A.)”
Important
•Do not store the remote control in high temperatures or direct sunlight.
•Do not let the remote control fall onto the floor, where it may become jammed under the brake or accelerator pedal.
Setup menu
When you turn the ignition switch to ON after installation, [SET UP :YES] appears in the display.
1Press the M.C. dial.
The setup menu disappears after 30 seconds of no operation. If you prefer not to set at this time, turn the M.C. dial to select [NO], then press to confirm.
2Turn the M.C. dial to select the options, then press to confirm.
To proceed to the next menu option, you need to confirm your selection.
Menu Item |
Description |
|
CLOCK SET |
Set the clock. |
|
|
1 Turn the M.C. dial to adjust the hour, then press to confirm. |
|
|
The indicator moves to the minute setting automatically. |
|
|
2 Turn the M.C. dial to adjust the minute, then press to confirm. |
|
|
|
|
PHONE CONNECT |
Select the type of device and the appropriate connection |
|
[IPHONE/IPOD], |
method according to your device. |
|
See page 16 for details on the connections for each device. |
||
[ANDROID], |
||
• Select [OTHERS] when you connect a mobile device |
||
[OTHERS] |
||
other than iPhone/Android. |
||
|
3[QUIT :YES] appears when all the settings have been made.
To return to the first item of the setup menu, turn the M.C. dial to select [QUIT :NO], then press to confirm.
English
En 5
4 Press the M.C. dial to confirm the settings.
NOTES
•You can cancel the menu setting by pressing SRC/OFF.
•These settings can be made at any time from the SYSTEM settings (page 16) and INITIAL settings (page 6).
Canceling the demonstration display (DEMO OFF)
1 Press the M.C. dial to display the main menu.
2 Turn the M.C. dial to select [SYSTEM], then press to confirm.
3 Turn the M.C. dial to select [DEMO OFF], then press to confirm.
4 Turn the M.C. dial to select [YES], then press to confirm.
INITIAL settings
1 Press and hold SRC/OFF until the unit turns off.
2 Press the M.C. dial to display the main menu.
3 Turn the M.C. dial to select [INITIAL], then press to confirm.
4 Turn the M.C. dial to select an option, then press to confirm.
Menu Item |
Description |
|
SP-P/O MODE |
Select when there is a full-range speaker connected to the rear |
|
|
[REAR/SUB.W] |
speaker output leads and there is a subwoofer connected to the |
|
RCA output. |
|
|
|
|
|
|
|
|
[SUB.W/SUB.W] |
Select when there is a passive subwoofer connected directly to |
|
|
the rear speaker output leads and there is a subwoofer |
|
|
connected to the RCA output. |
|
|
|
|
[REAR/REAR] |
Select when there are full-range speakers connected to the rear |
|
|
speaker output leads and RCA output. If there is a full-range |
|
|
speaker connected to the rear speaker output leads, and the |
|
|
RCA output is not used, you may select either [REAR/SUB.W] or |
|
|
[REAR/REAR]. |
|
|
|
6 En
Menu Item |
Description |
|
S/W UPDATE |
Select to confirm the latest system information on the unit. |
|
|
[SYSTEM INFO] |
|
|
|
|
|
[SYSTEM UPDATE] |
Select to update the unit to the latest software and initialize the |
|
|
unit settings. For details on the latest software and updating, |
|
|
visit our website. |
|
|
|
|
[BT VERSION] |
Select to display the system version of the unit and the |
|
|
Bluetooth module. |
|
|
|
|
[BT UPDATE] |
Select to update the unit to the latest Bluetooth software. For |
|
|
details on Bluetooth software and updating, visit our website. |
|
|
|
SYSTEM RESET |
Select [YES] to initialize the unit settings. The unit will be |
|
|
[YES], [NO] |
restarted automatically. |
|
(Some of the settings will be retained even after resetting the |
|
|
|
|
|
|
unit, such as Bluetooth pairing information, etc.) |
|
|
|
Radio
The tuner frequencies on this unit are allocated for use in North America. Use in other areas may result in poor reception.
Receiving preset stations
1 Press SRC/OFF to select [RADIO].
2 Press BAND/ 
to select the band from [FM1], [FM2], [FM3] or [AM].
3 Press a number button (1/ 
to 6/ 
).
TIP
The 
/ 
buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the FUNCTION settings (page 15).
Best stations memory (BSM)
The six strongest stations are stored on the number buttons (1/ 
to 6/ 
).
1 After selecting the band, press the M.C. dial to display the main menu.
2 Turn the M.C. dial to select [FUNCTION], then press to confirm.
3 Turn the M.C. dial to select [BSM], then press to confirm.
To seek a station manually
1After selecting the band, press 
/ 
to select a station.
Press and hold 
/ 
then release to seek an available station. Scanning stops when the unit receives a station. To cancel seek tuning, press 
/ 
.
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 15).
To store stations manually
1While receiving the station you want to store, press and hold one of the number buttons (1/ 
to 6/ 
) until it stops flashing.
CD/USB/iPod/AUX
Playing back
Disconnect headphones from the device before connecting it to the unit.
CD
1 Insert a disc into the disc loading slot with the label side up.
To eject a disc, stop playback first then press 
.
USB devices (including Android™)/iPod
1 Open the USB port cover.
2 Plug in the USB device/iPod using an appropriate cable.
NOTE
To automatically switch to [USB] source when a USB device/iPod is connected to the unit, set [USB AUTO] to [ON] in the SYSTEM settings (page 16).
CAUTION
Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device connected directly to the unit will protrude out from the unit, which could be dangerous.
Before removing the device, stop playback.
AOA connections
For details on AOA connection, see page 14.
MTP connection
A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using the cable supplied with the device. However, depending on the connected device and the numbers of the files in the device, audio files/songs may not be able to be played back via MTP. Note that MTP connection is not compatible with WAV file formats, and cannot be used with the MIXTRAX function.
NOTE
If you use an MTP connection, [PHONE CONNECT] needs to be set to [MEMORY] in the SYSTEM settings |
English |
|
(page 16). |
||
|
AUX
1 Insert the stereo mini plug into the AUX input jack.
2 Press SRC/OFF to select [AUX] as the source.
NOTE
If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source (page 16).
Operations
You can make various adjustments in the FUNCTION settings (page 15).
Note that the following operations do not work for an AUX device. To operate an AUX device, use the device itself.
Purpose |
Operation |
|
|
|
Select a folder/album*1 |
Press 1/ |
or 2/ . |
|
|
|
|
|
|
|
Select a track/song (chapter) |
Press |
or |
. |
|
|
|
|
|
|
Fast forward or reverse*2 |
Press and hold |
or |
. |
|
|
|
|
||
Search for a file from a list |
1 Press |
to display the list. |
||
|
2 Turn the M.C. dial to select the desired |
|||
|
file (folder) name or category, then press |
|||
|
to confirm. |
|
|
|
|
3 Turn the M.C. dial to select the desired |
|||
|
file, then press to confirm. |
|
||
|
Playback starts. |
|
|
|
|
|
|||
View a list of the files in the selected folder/ |
Press the M.C. dial when a folder/category |
|||
category*1 |
is selected. |
|
|
|
|
|
|||
Play a song in the selected folder/ |
Press and hold the M.C. dial when a folder/ |
|||
category*1 |
category is selected. |
|
||
|
|
|
|
|
En 7
Purpose |
Operation |
|
|
|
|
Alphabetical search (iPod only) |
1 Press |
to display the list. |
|
||
|
2 Turn the M.C. dial to select the desired |
||||
|
category list, then press |
to enter the |
|||
|
alphabetical search mode. |
|
|||
|
(Turning the M.C. dial twice also enters |
||||
|
the alphabetical search mode.) |
||||
|
3 Turn the M.C. dial to select a letter, then |
||||
|
press to display the alphabetical list. |
||||
|
To cancel alphabetical search, press BAND/ |
||||
|
. |
|
|
|
|
|
|
|
|
|
|
Repeat play |
Press 6/ |
. |
|
|
|
|
|
|
|
|
|
Random/shuffle play |
Press 5/ |
. |
|
|
|
|
|
|
|
||
Shuffle all play (iPod only) |
Press and hold 5/ |
. |
|
||
|
|
|
|
|
|
Pause/resume playback |
Press 4/PAUSE. |
|
|
|
|
|
|
|
|
||
Return to root folder (CD/USB only)*1 |
Press and hold . |
|
|
||
|
|
|
|
|
|
Switch between compressed audio and CD- |
Press BAND/ |
. |
|
|
|
DA (CD only) |
|
|
|
|
|
|
|
|
|
|
|
Change drives in USB device |
Press BAND/ |
. |
|
|
|
(Devices that support the USB mass storage |
|
|
|
|
|
device class protocol only) |
|
|
|
|
|
|
|
|
|
|
|
*1 Compressed audio files only
*2 When you use the fast forward or reverse function while playing a VBR file, the playback time may be not correct.
Useful functions for iPod
Link play mode
You can access songs based on the artist, album, or genre currently playing.
1 While listening to a song, press and hold 
to enter the link play mode.
2Turn the M.C. dial to select the mode ([ARTIST], [ALBUM], [GENRE]), then press to confirm.
The selected song/album will be played after the currently playing song.
NOTE
The selected song/album may be canceled if you use functions other than those from the link play mode (e.g. fast forward and reverse).
8 En
iPod control
You can control the unit via a connected iPod.
The following iPod models are not compatible with this function.
–iPod nano 1st generation, iPod with video
1 Press BAND/ 
during playback, then select the control mode.
[CONTROL iPod]: The unit’s iPod function can be operated from the connected iPod. [CONTROL AUDIO]: The unit’s iPod function can only be operated by the buttons on the unit or supplied remote control. In this mode, the connected iPod cannot be turned on or off.
NOTES
•Switching the control mode to [CONTROL iPod] pauses song playback. Use the connected iPod to resume playback.
•The following operations are still accessible from the unit, even if the control mode is set to [CONTROL iPod].
– Pause, fast forward/reverse, song/chapter selection
•The volume can only be adjusted from the unit.
About MIXTRAX (USB/iPod only)
The MIXTRAX function creates a non-stop mix of your music library, accompanied by illumination effects. For details on MIXTRAX settings, see page 18.
NOTES
•This function is not compatible with an Android device connected via MTP.
•When USB is selected as a source and the MIXTRAX function is in use, the sound retriever function is disabled.
•Depending on the file/song, sound effects may not be available.
•Turn the MIXTRAX function off if the illumination effects it produces interfere with driving.
1 Press 3/MIX to turn MIXTRAX on/off.
Bluetooth
Bluetooth connection
Important
If five or more Bluetooth devices (e.g. a phone and separate audio player) are connected, they may not work properly.
1Turn on the Bluetooth function of the device.
If you make a Bluetooth connection from the device, proceed to step 6.
2 Press 
to display the phone menu.
3 Turn the M.C. dial to select [BT SETTING], then press to confirm.
4Turn the M.C. dial to select [ADD DEVICE], then press to confirm.
The unit starts to search for available devices, then displays them in the device list.
•To cancel searching, press the M.C. dial.
•If the desired device is not in the list, select [RE-SEARCH].
•If there is no device available, [NOT FOUND] appears in the display.
5Turn the M.C. dial to select a device from the device list, then press to confirm.
Press and hold the M.C. dial to switch the displayed device information between the Bluetooth device address and device name.
If you make a Bluetooth connection from the unit, proceed to step 7.
6 Select [Pioneer BT Unit] shown in the device display.
7Make sure the same 6-digit number appears on this unit and the device, then select “Yes” on the device.
NOTES
•[DEVICE FULL] appears if the unit has already been paired with five other devices. In this case, delete one of the paired devices. See [DEL DEVICE] or [GUEST MODE] in the Bluetooth settings (page 9).
•Depending on the device, the PIN code is required in step 7. In this case, input [0000].
TIP
The Bluetooth connection can be also made by detecting the unit from the Bluetooth device. To do so, [VISIBLE] in the Bluetooth settings needs to be set to [ON]. For details on a Bluetooth device operations, refer to the operating instructions supplied with the Bluetooth device.
Bluetooth settings
Menu Item |
Description |
|
DEVICELIST |
Display the list of paired Bluetooth devices. “*” appears on the |
|
|
device name when the Bluetooth connection is established. |
|
|
When no device is selected in the device list, this function is not |
|
|
available. |
|
|
|
|
DEL DEVICE |
Delete the device information. |
|
[DELETE YES], |
When no device is selected in the device list, this function is not |
|
available. |
||
[DELETE NO] |
||
|
||
|
|
|
ADD DEVICE |
Register a new device. |
|
|
If five devices are already paired, this function is not available. |
|
|
You can check the number of paired devices on the [DEVICELIST] |
|
|
setting. |
|
|
|
Menu Item |
Description |
|
|
A.CONN |
Select [ON] to connect to a Bluetooth device automatically. |
|
|
[ON], [OFF] |
|
|
|
|
|
|
|
VISIBLE |
Select [ON] so that a Bluetooth device can detect the unit when |
|
|
[ON], [OFF] |
the unit is connected via Bluetooth to another device. |
|
|
|
|
||
|
|
English |
|
PIN CODE |
Change the PIN code. |
||
|
|||
|
1 Press the M.C. dial to display the setting mode. |
|
|
|
2 Turn the M.C. dial to select a number. |
|
|
|
3 Press the M.C. dial to move the cursor to the next position. |
|
|
|
4 After inputting the PIN code, press and hold the M.C. dial. |
|
|
|
After inputting the PIN code, pressing the M.C. dial returns you |
|
|
|
to the PIN code input display, and you can change the PIN code. |
|
|
|
|
|
|
DEV. INFO |
Switch the device information on the display between the |
|
|
|
device name and Bluetooth device address. |
|
|
|
|
|
|
GUEST MODE |
Select [ON] to move to the [DEL DEVICE] screen automatically |
|
|
[ON], [OFF] |
when the unit has already been paired with five devices. |
|
|
|
|
||
|
|
|
|
A.PAIRING |
Select [ON] to pair the unit and iPhone automatically when an |
|
|
[ON], [OFF] |
iPhone is connected to the unit via USB. (This function may not |
|
|
be available depending on the version of iOS you are using.) |
|
||
|
|
||
|
|
|
Bluetooth telephone
First, make a Bluetooth connection with the Bluetooth telephone (page 8). Up to two Bluetooth telephones can be connected simultaneously.
Important
•Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running can drain the vehicle’s battery.
•Be sure to park your vehicle in a safe place and apply the parking brake before operation.
To make a phone call
1Press 
to display the phone menu.
When two phones are connected, a phone name appears first then a phone menu will display. To switch to another phone, press 
again.
2Turn the M.C. dial to select [RECENTS] or [PHONE BOOK], then press to confirm.
If you select [PHONE BOOK], proceed to step 4.
3Turn the M.C. dial to select [MISSED], [DIALED] or [RECEIVED], then press to confirm.
4 Turn the M.C. dial to select a name or phone number, then press to confirm.
En 9
The phone call starts.
To answer an incoming call
1 Press 
when a call is received.
TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call while one phone is being used for a call, a message will appear in the display. To answer that incoming call, you need to end the existing call.
Basic operations
Purpose |
Operation |
|
|
End a call |
Press |
. |
|
|
|
|
|
Reject an incoming call |
Press and hold |
when a call is received. |
|
|
|
||
Switch between the current caller |
Press the M.C. dial. |
||
and a caller on hold |
|
|
|
|
|
|
|
Cancel a caller on hold |
Press and hold |
. |
|
|
|
||
Adjust the volume of the caller’s |
Turn the M.C. dial during the call. |
||
voice (When private mode is on, |
|
|
|
this function is not available.) |
|
|
|
|
|
|
|
Turn the private mode on or off |
Press BAND/ |
during the call. |
|
|
|
|
|
To preset phone numbers
1 Select a phone number from a phone book or call history.
2Press and hold one of the number buttons (1/ 
to 6/ 
).
The contact is stored in the selected preset number.
To make a call using a preset number, press one of the number buttons (1/ 
to 6/ 
), then press the M.C. dial.
Voice recognition (Only for iPhone)
This function is only available when an iPhone equipped with voice recognition is connected to the unit via Bluetooth.
1 |
Press and hold |
to activate the voice recognition mode. |
2 |
Press the M.C. dial and then talk into the microphone to input voice commands. |
|
To exit the voice recognition mode, press BAND/ 
.
NOTE
For details on the voice recognition features, refer to the manual supplied with your iPhone.
Phone menu
Menu Item |
Description |
||
RECENTS |
Display the missed call history. |
||
|
[MISSED] |
|
|
|
|
|
|
|
[DIALED] |
Display the dialed call history. |
|
|
|
|
|
|
[RECEIVED] |
Display the received call history. |
|
|
|
||
PHONE BOOK*1 |
Display the contacts which have been transferred from your |
||
|
|
phone. Set [VISIBLE] in the Bluetooth settings to [ON] to browse |
|
|
|
the contacts via this unit. |
|
|
|
||
PRESET 1-6 |
Recall the preset phone numbers. You can also recall the preset |
||
|
|
phone numbers by pressing one of the number buttons (1/ |
|
|
|
to 6/ |
). |
|
|
||
A.ANSR*2 |
Select [ON] to answer an incoming call automatically. |
||
|
[ON], [OFF] |
|
|
|
|
||
R.TONE |
Select [ON] if the ring tone does not come out from the car |
||
|
[ON], [OFF] |
speakers. Depending on the connected phone, this function |
|
|
may not work. |
||
|
|
||
|
|
||
PB INVT |
Invert the order of names in the phone book (name view). |
||
|
|
||
PB A.SYNC |
Select whether or not to transfer the contacts from your phone |
||
|
[ON], [OFF] |
automatically when your phone is connected to the unit. |
|
|
• When connected for the first time, the contacts from your |
||
|
|
||
|
|
phone are transferred automatically, regardless of the [PB |
|
|
|
A.SYNC] setting. |
|
|
|
• If you switch from [ON] to [OFF], the auto synchronization will |
|
|
|
not be performed on the next connection. |
|
|
|
• If you switch from [OFF] to [ON], the auto synchronization will |
|
|
|
be performed when your phone is connected to the unit. |
|
|
|
• During the auto synchronization, you cannot cancel the |
|
|
|
synchronization, even if you select [OFF]. |
|
|
|
||
BT SETTING |
You can adjust various settings for Bluetooth connections. For |
||
|
|
details on Bluetooth settings, see page 9. |
|
|
|
|
|
*1 The contacts on your phone will normally be transferred automatically when the phone is connected. If they are not, use your phone to transfer the contacts.
*2 If two phones are connected, this function does not work on incoming calls that are received while one of the phones is being used for a call.
10En
Bluetooth audio
Important
•Depending on the Bluetooth audio player connected to this unit, the available operations will be limited to the following two levels:
–A2DP (Advanced Audio Distribution Profile) can only play back songs on your audio player.
–AVRCP (Audio/Video Remote Control Profile) can perform functions such as playback, pause, select song, etc.
•The sound of the Bluetooth audio player will be muted when the phone is in use.
•When the Bluetooth audio player is in use, you cannot connect to a Bluetooth telephone automatically.
•Depending on the type of Bluetooth audio player you have connected to this unit, operation and information displayed may vary based on availability and functionality.
1 Make a Bluetooth connection with the Bluetooth audio player.
2 Press SRC/OFF to select [BT AUDIO] as the source.
3 Press BAND/ 
to start playback.
Basic operations
You can make various adjustments in the FUNCTION settings (page 15).
Purpose |
Operation |
|
|
|
|
Fast forward or reverse |
Press and hold |
or |
. |
||
|
|
|
|
|
|
Select a track |
Press |
or |
. |
|
|
|
|
|
|
|
|
Repeat play* |
Press 6/ |
. |
|
|
|
|
|
|
|
|
|
Random play* |
Press 5/ |
. |
|
|
|
|
|
|
|
||
Pause/resume playback |
Press 4/PAUSE. |
|
|
||
|
|
|
|
|
|
Search for a file from a list |
1 |
Press |
to display a list. |
|
|
|
2 |
Turn the M.C. dial to select the desired |
|||
|
|
folder name, then press to confirm. |
|||
|
3 |
Turn the M.C. dial to select the desired |
|||
|
|
file, then press to confirm. |
|
||
|
Playback starts. |
|
|
||
|
|
|
|
|
|
* Depending on the connected device, these operations may not be available.
App Mode
You can enjoy listening to an application on an iPhone/Android device via the unit. In some cases, you can control an application by using the unit.
For details on compatible devices, visit our website.
Important
Use of third party apps may involve or require the provision of personally identifiable information, |
|
whether through the creation of a user account or otherwise, and for certain applications, the provision |
|
of geolocation data. |
|
ALL THIRD PARTY APPS ARE THE SOLE RESPONSIBILITY OF THE PROVIDERS, INCLUDING WITHOUT |
|
LIMITATION COLLECTION AND SECURITY OF USER DATA AND PRIVACY PRACTICES. BY ACCESSING |
English |
CONSENT TO THE USE OF GEOLOCATION DATA WHERE APPLICABLE, DO NOT USE THAT THIRD PARTY |
|
THIRD PARTY APPS, YOU AGREE TO REVIEW THE TERMS OF SERVICE AND PRIVACY POLICIES OF THE |
|
PROVIDERS. IF YOU DO NOT AGREE WITH THE TERMS OR POLICIES OF ANY PROVIDER OR DO NOT |
|
APP. |
|
For iPhone users |
|
This function is compatible with iPhones and iPod touches installed with iOS 5.0 or later. |
|
For Android device users |
|
This function is compatible with devices that have Android OS 2.3 or later installed. |
|
NOTE |
|
PIONEER IS NOT LIABLE FOR ANY THIRD PARTY APPS OR CONTENT, INCLUDING WITHOUT LIMITATION |
|
THEIR ACCURACY OR COMPLETENESS. THE CONTENT AND FUNCTIONALITY OF SUCH APPS ARE THE |
|
SOLE RESPONSIBILITY OF THE APP PROVIDER. |
|
Playback of an application via the unit
1Connect this unit with the mobile device.
•iPhone via USB (page 7)
•Android device via Bluetooth (page 8)
2 Press SRC/OFF to select [APP].
3 Press and hold 
to display [PHONE CONNECT].
4Turn the M.C. dial to select one of the below, then press to confirm.
•Select [IPHONE/IPOD] for iPhone.
•Select [ANDROID] for Android device.
If you select [IPHONE/IPOD], proceed to step 6.
NOTE
When the connection setting is changed, a message that lets you know that the connection setting had been changed will appear in the display. Press the M.C. dial and turn the M.C. dial to select [SRC OFF :YES], then press to confirm. The unit turns off automatically and the setting is executed.
5 Turn the M.C. dial to select [BLUETOOTH] for the Bluetooth connection.
6 Press SRC/OFF to select [APP].
7 Operate the mobile device to start up the application.
En 11
NOTE
When you connect a mobile device other than iPhone/Android device, select [OTHERS] in the [PHONE CONNECT] menu and select [WIRED] (for the USB connection) or [BLUETOOTH] (for the Bluetooth connection). Depending on your mobile device, it may not operate correctly.
Basic operations
You can make various adjustments in the FUNCTION settings (page 15).
Purpose |
Operation |
|
|
|
Select a track |
Press |
or |
. |
|
|
|
|
|
|
Fast forward or reverse |
Press and hold |
or |
. |
|
|
|
|
|
|
Pause/resume playback |
Press BAND/ |
. |
|
|
|
|
|
|
|
Pandora®
Pandora internet radio is a music service not affiliated with Pioneer. More information is available at http://www.pandora.com.
The Pandora mobile application is available for iPhone and Android phones. Please visit www.pandora.com/everywhere/mobile for the latest compatibility information.
Listening to Pandora
Update the firmware of the Pandora application to the latest version before use.
1Connect this unit with the mobile device.
•iPhone via USB (page 7)
•Android device via Bluetooth (page 8)
2 Press SRC/OFF to select [PANDORA].
3 Press and hold 
to display [PHONE CONNECT].
4Turn the M.C. dial to select one of the below, then press to confirm.
•Select [IPHONE/IPOD] for iPhone.
•Select [ANDROID] for Android device.
If you select [IPHONE/IPOD], proceed to step 6.
NOTE
When the connection setting is changed, a message that lets you know that the connection setting had been changed will appear in the display. Press the M.C. dial and turn the M.C. dial to select [SRC OFF :YES], then press to confirm. The unit turns off automatically and the setting is executed.
5 Turn the M.C. dial to select [BLUETOOTH] for the Bluetooth connection.
6 Press SRC/OFF to select [PANDORA].
7 Launch the Pandora application on the mobile device and start playback.
NOTE
When you connect a mobile device other than iPhone/Android device, select [OTHERS] in the [PHONE CONNECT] menu and select [WIRED] (for the USB connection) or [BLUETOOTH] (for the Bluetooth connection). Depending on your mobile device, it may not operate correctly.
Basic operations
You can make various adjustments in the FUNCTION settings (page 15).
Purpose |
Operation |
|
|
|
Skip a track |
Press |
. |
|
|
|
|
|
||
Switch between Shuffle and the |
Press |
(list), then turn the M.C. dial to select the |
||
station |
Shuffle or the desired station. |
|||
|
|
|
||
Change the sort order |
Press |
(list), then select one of the following. |
||
|
[ABC]: Sort the items in the list alphabetically. |
|||
|
[DATE]: Sort the items in the list in order of the |
|||
|
dates on which the items were created. |
|||
|
|
|||
Play |
When Shuffle or the station is selected, press the |
|||
|
M.C. dial. |
|
|
|
|
|
|||
Delete a station |
1 When the station is selected, press and hold the |
|||
|
M.C. dial. |
|
|
|
|
[DELETE YES] appears. |
|
||
|
2 Press the M.C. dial. |
|
||
|
To cancel, press BAND/ |
in step 1. |
||
|
|
|
|
|
Pause/resume playback |
Press 4/PAUSE. |
|
|
|
|
|
|
|
|
Thumbs Up |
Press 1/ . |
|
|
|
|
|
|
|
|
Thumbs Down |
Press 2/ . |
|
|
|
|
|
|
|
|
Create a new station based on the |
Press and hold 5/ |
. |
|
|
track currently being played |
|
|
|
|
|
|
|
|
|
Create a new station based on the |
Press and hold 6/ |
. |
|
|
artist currently being played |
|
|
|
|
|
|
|
||
Store the track information currently |
1 Press and hold 3/MIX. |
|
||
being played in your Pandora |
[BOOKMARK] appears. |
|
||
account. |
2 Press the M.C. dial. |
|
||
|
|
|
|
|
NOTE
Some functions of Pandora may not be operated from the unit.
12En
Spotify®
Spotify is a music streaming distribution service not affiliated with Pioneer. More information is available at http://www.spotify.com.
The Spotify application is available for compatible smartphones, please visit https:// support.spotify.com/ for the latest compatibility information.
To enjoy Spotify as you drive, first download the Spotify app to your iPhone or Android device. You can download it on the iTunes App Store or Google Play™. Choose a free account or a paid Premium account, either in the app or at spotify.com. A Premium account gives you more features, like offline listening.
Important
•This product incorporates Spotify software which is subject to 3rd party licenses found here: www.spotify.com/connect/third-party-licenses.
•For information on the countries and regions where Spotify can be used, take a look at https:// www.spotify.com/us/select-your-country/.
Listening to Spotify
Update the firmware of the Spotify application to the latest version before use.
1Connect this unit with the mobile device.
•iPhone via USB (page 7)
•Android device via Bluetooth (page 8)
2 Press the M.C. dial to display the main menu.
3 Turn the M.C. dial to select [SYSTEM], then press to confirm.
4 Turn the M.C. dial to select [PHONE CONNECT], then press to confirm.
5Turn the M.C. dial to select one of the below, then press to confirm.
•Select [IPHONE/IPOD] for iPhone.
•Select [ANDROID] for Android device.
If you select [IPHONE/IPOD], proceed to step 7.
NOTE
When the connection setting is changed, a message that lets you know that the connection setting had been changed will appear in the display. Press the M.C. dial and turn the M.C. dial to select [SRC OFF :YES], then press to confirm. The unit turns off automatically and the setting is executed.
6 Turn the M.C. dial to select [BLUETOOTH] for the Bluetooth connection.
7 Press SRC/OFF to select [SPOTIFY].
8 Launch the Spotify application on the mobile device and start playback.
NOTE
When you connect a mobile device other than iPhone/Android device, select [OTHERS] in the [PHONE CONNECT] menu and select [WIRED] (for the USB connection) or [BLUETOOTH] (for the Bluetooth connection). Depending on your mobile device, it may not operate correctly.
Basic operations
You can make various adjustments in the FUNCTION settings (page 15). |
English |
||||
NOTE |
|
|
|
|
|
|
|
|
|
|
|
The available operations may vary according to the type of contents (track/album/artist/playlist/radio) |
|
||||
you want to play. |
|
|
|
|
|
|
|
|
|
|
|
Purpose |
Operation |
|
|
|
|
Skip a track |
Press |
or |
. |
|
|
|
|
|
|
|
|
Search for a track from a list |
1 |
Press |
(list) to display the list. |
|
|
|
2 |
Turn the M.C. dial to select the desired |
|
||
|
|
category, then press to confirm. |
|
||
|
3 |
Turn the M.C. dial to select the desired |
|
||
|
|
file, then press to confirm. |
|
||
|
|
Playback starts. |
|
|
|
|
|
|
|
||
Pause/resume playback |
Press 4/PAUSE. |
|
|
||
|
|
|
|
||
Thumbs Up (Only for radio) |
Press 1/ . |
|
|
||
|
|
|
|
||
Thumbs Down (Only for radio) |
Press 2/ . |
|
|
||
|
|
|
|
|
|
Random play (Only for track/album/artist/ |
Press 5/ |
. |
|
|
|
playlist) |
|
|
|
|
|
|
|
|
|
|
|
Repeat play (Only for track/album/artist/ |
Press 6/ |
. |
|
|
|
playlist) |
|
|
|
|
|
|
|
|
|
|
|
Start a radio channel based on the song |
1 |
Press and hold |
(list) to start a radio. |
|
|
currently being played. |
2 |
Press the M.C. dial. |
|
||
•This function may not be available depending on the selected song.
Store the information about the song |
1 |
Press and hold 3/MIX. |
currently being played. |
|
[SAVE]/[UNSAVE] appears. |
Remove the song information stored. |
2 |
Press the M.C. dial. |
NOTE
Some functions of Spotify may not be operated from the unit.
En 13
Using Pioneer ARC APP
You can operate the unit from Pioneer ARC APP installed on an iPhone/Android device. In some cases, you can control aspects of the application, such as source selection, pause, etc., by using the unit.
For details on what operations are available on the application, see the application’s help section.
WARNING
Do not attempt to operate the application while driving. Make sure to pull off the road and park your vehicle in a safe location before attempting to use the controls on the application.
For iPhone users
This function is compatible with iPhones (iPhone 5 or later) and iPod touches installed with iOS 8.0 or later.
You can download Pioneer ARC APP on iTunes App Store.
For Android device users
This function is compatible with devices that have Android OS 4.1 or later installed and also support AOA (Android Open Accessory) 2.0.
You can download Pioneer ARC APP on Google Play.
NOTE
Some Android devices connected via AOA 2.0 may not work properly or emit sounds due to their own software design, regardless of the OS version.
Making a connection with Pioneer ARC APP
1Connect this unit with the mobile device.
•iPhone/Android device via USB (page 7)
•Android device via Bluetooth (page 8)
2 Press the M.C. dial to display the main menu.
3 Turn the M.C. dial to select [SYSTEM], then press to confirm.
4 Turn the M.C. dial to select [PHONE CONNECT], then press to confirm.
5Turn the M.C. dial to select one of the below, then press to confirm.
•Select [IPHONE/IPOD] for iPhone.
•Select [ANDROID] for Android device.
If you select [IPHONE/IPOD], proceed to step 7.
NOTE
When the connection setting is changed, a message that lets you know that the connection setting had been changed will appear in the display. Press the M.C. dial and turn the M.C. dial to
select [SRC OFF :YES], then press to confirm. The unit turns off automatically and the setting is executed.
6Turn the M.C. dial to select one of the below.
•Select [APP CONTROL] for the USB connection.
•Select [BLUETOOTH] for the Bluetooth connection.
When you select the USB connection, Pioneer ARC APP on the Android device starts automatically if [ON] is selected in [P.APP AUTO ON] (page 16).
NOTE
If Pioneer ARC APP has not been installed on your Android device yet, a message that prompts you to install the application will appear on your Android device. Select [OFF] in [P.APP AUTO ON] to clear the message (page 16).
7 Press SRC/OFF to select any source.
8Launch Pioneer ARC APP on the mobile device via USB connection. Press and hold M.C. dial via Bluetooth connection.
NOTE
When you connect a mobile device other than iPhone/Android device, select [OTHERS] in the [PHONE CONNECT] menu and select [WIRED] (for the USB connection) or [BLUETOOTH] (for the Bluetooth connection). Depending on your mobile device, it may not operate correctly.
Listening to music on Android
1 Press SRC/OFF to select [ANDROID].
Basic operations
Purpose |
Operation |
|
|
|
Select a track |
Press |
or |
. |
|
|
|
|
|
|
Fast forward or reverse |
Press and hold |
or |
. |
|
|
|
|
|
|
Pause/resume playback |
Press 4/PAUSE. |
|
|
|
|
|
|
|
|
Settings
You can adjust various settings in the main menu.
1 Press the M.C. dial to display the main menu.
2Turn the M.C. dial to select one of the categories below, then press to confirm.
• FUNCTION settings (page 15)
14En
•AUDIO settings (page 15)
•SYSTEM settings (page 16)
•ILLUMINATION settings (page 18)
•MIXTRAX settings (page 18)
3 Turn the M.C. dial to select the options, then press to confirm.
FUNCTION settings
The menu items vary according to the source.
Menu Item |
Description |
|
|
|
|
|||||||||||||
BSM |
|
|
|
|
|
|
|
|
|
|
|
|
Store the six strongest stations on the number |
|||||
|
||||||||||||||||||
|
||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
buttons (1/ |
to 6/ |
) automatically. |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LOCAL |
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
||||||||||||
FM: [OFF], [LV1], [LV2], [LV3], [LV4] |
Restrict the tuning station according to the |
|||||||||||||||||
AM: [OFF], [LV1], [LV2] |
signal strength. |
|
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SEEK |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
||||||||||||
[MAN], [PCH] |
Assign |
or |
buttons to seek the stations |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
one by one (manual tuning) or select a station |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
from the preset channels. |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SAVE |
|
|
|
|
|
|
Store the information about the song currently |
|||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
being played to your music list on Spotify. |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UNSAVE |
|
|
|
|
Remove the song information stored in [SAVE]. |
|||||||||||||
|
||||||||||||||||||
|
||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SEL DEVICE |
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
||||||||||||
|
Connect a Bluetooth device in the list. |
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
S.RTRV |
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|||||||||||||
[1] (effective for low compression |
Enhance compressed audio and restore rich |
|||||||||||||||||
rates), |
sound. |
|
|
|
|
|||||||||||||
[2] (effective for high |
Not available when: |
|
|
|
||||||||||||||
compression rates), |
• USB is selected as a source and the MIXTRAX |
|||||||||||||||||
[OFF] |
function is set to on. |
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
• CD-DA/CD-TEXT is played back. |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Menu Item |
Description |
|
||||
AUDIO BOOK |
|
|
||||
[FASTER], [NORMAL], [SLOWER] |
Change the playback speed. (Not available when |
|
||||
|
|
|
|
|
[CONTROL iPod] is selected in the control mode.) |
|
|
|
|
|
|
|
|
BOOKMARK |
|
|
||||
|
|
|
|
|
Store the track information currently being |
English |
|
|
|
|
|
played in your Pandora account. |
|
|
|
|
|
|
|
|
NEW STATION |
|
|||||
|
|
|||||
[FROM TRACK], [FROM ARTIST] |
Create a new station based on the track or artist |
|
||||
|
|
|
|
|
currently being played. |
|
|
|
|
|
|
|
|
PAUSE |
|
|
||||
|
|
|
|
|
Pause or resume playback. |
|
|
|
|
|
|
|
|
PLAY |
|
|
|
|
Start playback. |
|
|
|
|||||
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
STOP |
|
|
Stop playback. |
|
||
|
|
|||||
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO settings
Menu Item |
Description |
|
FADER*1 |
|
|
|
Adjust the front and rear speaker balance. |
|
|
|
|
BALANCE |
|
|
|
Adjust the left and right speaker balance. |
|
|
|
|
EQ SETTING |
|
|
[SUPER BASS], [POWERFUL], |
Select or customize the equalizer curve. |
|
[NATURAL], [VOCAL], [CUSTOM1], |
[CUSTOM1] can be set separately for each source. |
|
[CUSTOM2], [FLAT] |
However, each of the below combinations are set |
|
|
to the same setting automatically. |
|
Select an equalizer band and |
• When making a USB connection, set USB, iPod, |
|
level for further customizing. |
PANDORA, ANDROID, SPOTIFY, and APP. |
|
Equalizer band: [80HZ], [250HZ], |
• When making a Bluetooth connection, set BT |
|
[800HZ], [2.5KHZ], [8KHZ] |
AUDIO, PANDORA, ANDROID, SPOTIFY, and |
|
Equalizer level: [+6] to [–6] |
APP. |
|
|
[CUSTOM2] is a shared setting used for all |
|
|
sources. |
|
|
|
|
|
En 15 |
|
Menu Item |
Description |
LOUDNESS |
|
[OFF], [LOW], [MID], [HI] |
Compensate for clear sound at low volume. |
|
|
SUB.W*2 |
|
[NOR], [REV], [OFF] |
Select the subwoofer phase. |
|
|
SUB.W CTRL*2*3 |
|
Cut-off frequency: [50HZ], |
Only frequencies lower than those in the |
[63HZ], [80HZ], [100HZ], [125HZ], |
selected range are output from the subwoofer. |
[160HZ], [200HZ] |
|
Output level: [–24] to [+6] |
|
Slope level: [–12], [–24] |
|
|
|
BASS BOOST |
|
[0] to [+6] |
Select the bass boost level. |
|
|
HPF SETTING |
|
Cut-off frequency: [OFF], [50HZ], |
Only frequencies higher than the high-pass filter |
[63HZ], [80HZ], [100HZ], [125HZ], |
(HPF) cutoff are output from the speakers. |
[160HZ], [200HZ] |
|
Slope level: [–12], [–24] |
|
|
|
SLA |
|
[+4] to [–4] |
Adjust the volume level for each source except |
|
FM. |
|
Each of the below combinations are set to the |
|
same setting automatically. |
|
• When making a USB connection, set USB, iPod, |
|
PANDORA, ANDROID, SPOTIFY, and APP. |
|
• When making a Bluetooth connection, set BT |
|
AUDIO, PANDORA, ANDROID, SPOTIFY, and |
|
APP. |
|
|
*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings (page 6).
*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings (page 6). *3 Not available when [OFF] is selected in [SUB.W].
SYSTEM settings
You can also access to these menus when the unit is turned off.
Menu Item |
Description |
|
|
CLOCK SET
Set the clock (page 5).
16En
Menu Item |
Description |
12H/24H |
|
[12H], [24H] |
Select the time notation. |
|
|
AUX |
|
[ON], [OFF] |
Set to [ON] when using an auxiliary device |
|
connected to the unit. |
|
|
BT AUDIO |
|
[ON], [OFF] |
Set the Bluetooth signal on/off. |
|
|
SPOTIFY |
|
[ON], [OFF] |
Set to [ON] when using the Spotify function. |
|
|
BT MEM CLEAR |
|
[YES], [NO] |
Clear the Bluetooth device data (device list, PIN |
|
code, call history, phone book, preset phone |
|
numbers) stored in the unit. |
|
[CLEARED] appears when data is successfully |
|
deleted. |
|
|
PHONE CONNECT |
|
[IPHONE/IPOD], [ANDROID], |
Select the type of device and the appropriate |
[OTHERS] |
connection method according to your device. |
|
See page 16 for details on the connections for |
|
each device. |
|
• Select [OTHERS] when you connect a mobile |
|
device other than iPhone/Android. |
|
|
P.APP AUTO ON |
|
[ON], [OFF] |
Select [ON] to automatically launch Pioneer ARC |
|
APP when an Android device is connected to the |
|
unit via AOA. (Not available when [MEMORY]/ |
|
[IPHONE/IPOD]/[WIRED]/[BLUETOOTH] is selected |
|
in [PHONE CONNECT].) |
|
|
USB AUTO |
|
[ON], [OFF] |
Select [ON] to automatically switch to [USB] |
|
source when a USB device/iPod is connected to |
|
the unit. |
|
Select [OFF] when a USB device/iPod is being |
|
connected to the unit just for charging. |
|
|
Information on the connections for each device
The available sources differ depending on the setting value.
Please set [PHONE CONNECT] according to the table for the source you want to use.
For details on Pioneer ARC APP connection, see page 14.
When Pioneer ARC APP connection is NOT performed
Setting Value |
Device |
Connection method |
Available source(s) |
|
[IPHONE/IPOD] |
iOS |
USB |
PANDORA, APP, |
|
|
|
|
SPOTIFY |
|
|
|
|
|
|
|
|
Bluetooth |
- |
|
|
|
|
|
|
|
Android |
USB |
USB MTP |
|
|
|
|
|
|
|
|
Bluetooth |
- |
|
|
|
|
|
|
[WIRED] |
iOS |
USB |
PANDORA, APP, |
|
(When [OTHERS] is |
|
|
SPOTIFY |
|
selected) |
|
|
|
|
|
Bluetooth |
- |
||
|
|
|||
|
|
|
|
|
|
Android |
USB |
USB MTP |
|
|
|
|
|
|
|
|
Bluetooth |
- |
|
|
|
|
|
|
[MEMORY](MTP) |
iOS |
USB |
PANDORA, APP, |
|
|
|
|
SPOTIFY |
|
|
|
|
|
|
|
|
Bluetooth |
- |
|
|
|
|
|
|
|
Android |
USB |
USB MTP |
|
|
|
|
|
|
|
|
Bluetooth |
- |
|
|
|
|
|
|
[APP CONTROL](AOA) |
iOS |
USB |
PANDORA, APP, |
|
|
|
|
SPOTIFY |
|
|
|
|
|
|
|
|
Bluetooth |
- |
|
|
|
|
|
|
|
Android |
USB |
APP (AOA) |
|
|
|
|
|
|
|
|
Bluetooth |
- |
|
|
|
|
|
|
[BLUETOOTH] |
iOS |
USB |
- |
|
(When [ANDROID] or |
|
|
|
|
|
Bluetooth |
- |
||
[OTHERS] is selected) |
|
|||
|
|
|
||
Android |
USB |
USB MTP |
||
|
||||
|
|
|
|
|
|
|
Bluetooth |
PANDORA, APP, |
|
|
|
|
SPOTIFY |
|
|
|
|
|
|
When Pioneer ARC APP connection is performed |
|
|||
Setting Value |
Device |
Connection method |
Available source(s) |
[IPHONE/IPOD] |
iOS |
USB |
PANDORA, SPOTIFY |
|
|
|
|
|
|
Bluetooth |
- |
|
|
|
|
|
Android |
USB |
USB MTP |
|
|
|
|
|
|
Bluetooth |
- |
|
|
|
|
Setting Value |
Device |
Connection method |
Available source(s) |
|
|
[WIRED] |
iOS |
USB |
PANDORA, SPOTIFY |
|
|
(When [OTHERS] is |
|
|
|
|
|
|
Bluetooth |
- |
|
||
selected) |
|
|
|||
|
|
|
|
||
Android |
USB |
USB MTP |
|
||
|
|
||||
|
|
|
|
|
|
|
|
Bluetooth |
- |
|
|
|
|
|
|
English |
|
[MEMORY](MTP) |
iOS |
USB |
PANDORA, SPOTIFY |
||
|
|||||
|
|
|
|
|
|
|
|
Bluetooth |
- |
|
|
|
|
|
|
|
|
|
Android |
USB |
USB MTP |
|
|
|
|
|
|
|
|
|
|
Bluetooth |
- |
|
|
|
|
|
|
|
|
[APP CONTROL](AOA) |
iOS |
USB |
PANDORA, SPOTIFY |
|
|
|
|
|
|
|
|
|
|
Bluetooth |
- |
|
|
|
|
|
|
|
|
|
Android |
USB |
ANDROID (Android |
|
|
|
|
|
Music) |
|
|
|
|
|
|
|
|
|
|
Bluetooth |
- |
|
|
|
|
|
|
|
|
[BLUETOOTH] |
iOS |
USB |
- |
|
|
(When [ANDROID] or |
|
|
|
|
|
|
Bluetooth |
- |
|
||
[OTHERS] is selected) |
|
|
|||
|
|
|
|
||
Android |
USB |
USB MTP |
|
||
|
|
||||
|
|
|
|
|
|
|
|
Bluetooth |
PANDORA, ANDROID |
|
|
|
|
|
(Android Music), |
|
|
|
|
|
SPOTIFY |
|
|
|
|
|
|
|
En 17
ILLUMINATION settings
Menu Item |
Description |
COLOR (Not available for DEH-X3900BT/X3910BT) |
|
[KEY COLOR], [DISP COLOR], |
Select color for the keys/display of the unit from |
[BOTH COLOR] |
12 preset colors, [SCAN] or [CUSTOM]*. |
|
• [SCAN]: Cycle through a variety of colors |
|
automatically. |
|
• [CUSTOM]*: |
|
1 Press and hold the M.C. dial until the color |
|
setting display appears. |
|
2 Set the primary color (R (red)/G (green)/B |
|
(blue)) and brightness level ([0] to [60]). |
|
You cannot select a level below 10 for all three |
|
of R (red), G (green), B (blue) at the same time. |
|
You can also customize the preset colors. Select |
|
one of the preset colors, then press and hold the |
|
M.C. dial until the color setting display appears. |
|
* The CUSTOM setting is only available for [KEY |
|
COLOR] and [DISP COLOR]. |
|
|
DIM SETTING |
|
[SYNC ILLUMI]*, [SYNC CLOCK], |
Change the display brightness. |
[MANUAL] |
|
* Not available for DEH-X3900BT/ X3910BT
BRIGHTNESS (Only for DEH-X4900BT)
[KEY], [DISP] Select the brightness for the keys/display of the unit from [1] to [10].
The available setting ranges differ depending on [DIM SETTING].
BRIGHTNESS (Only for DEH-X3900BT/X3910BT)
[1] to [10] Change the display brightness.
The available setting ranges differ depending on [DIM SETTING].
PHONE COLOR (Not available for DEH-X3900BT/X3910BT)
[FLASHING] Select the key color when a call is received. Applies the color set by [KEY COLOR].
|
[FLASH FX1] to [FLASH FX6] |
Cycle through a variety of colors automatically. |
|
[OFF] |
No change in key color made. |
|
|
|
Menu Item |
Description |
ILLUMI FX (Not available for DEH-X3900BT/X3910BT) |
|
[ON], [OFF] |
The illumination effect can be seen when: |
|
– there is an incoming call |
|
– you are on a phone call |
|
– a CD is inserted/ejected |
|
The illumination effect will activate when the |
|
ACC power is turned on/off regardless of this |
|
setting. |
|
|
MIXTRAX settings
Menu Item |
Description |
SHORT PLAYBCK |
|
[1.0 MIN], [1.5 MIN], [2.0 MIN], |
Select the length of the playback time. |
[2.5 MIN], [3.0 MIN], [OFF] |
|
|
|
FLASH AREA (Not available for DEH-X3900BT/X3910BT) |
|
[KEY/DISPLAY], [KEY], [OFF] |
Select the area for the illumination effect. |
|
When [OFF] is selected, the color set under the |
ILLUMINATION settings (page 18) is used as the display color.
FLASH PATTERN (Not available for DEH-X3900BT/X3910BT)
|
[SOUND LEVEL 1] to [SOUND LEVEL |
Change the illumination effect according to |
|
6] |
the sound and bass level. |
|
|
The flash pattern changes according to the |
|
|
sound level. |
|
|
|
|
[LOW PASS 1] to [LOW PASS 6] |
The flash pattern changes according to the |
|
|
bass level. |
|
|
|
|
[RANDOM1] |
The flash pattern changes randomly according |
|
|
to the sound level mode and low pass mode. |
|
|
|
|
[RANDOM2] |
The flash pattern changes randomly according |
|
|
to the sound level mode. |
|
|
|
|
[RANDOM3] |
The flash pattern changes randomly according |
|
|
to the low pass mode. |
|
|
|
18En
Menu Item |
Description |
|
|
MIX PATTERN (Only for DEH-X3900BT/X3910BT)
[SOUND LEVEL] Change the MIXTRAX special effects according to the audio level.
The mix pattern changes according to the sound level.
|
[LOW PASS] |
The mix pattern changes according to the bass |
|
|
level. |
|
|
|
|
[RANDOM] |
The mix pattern changes randomly according |
|
|
to the sound level mode and low pass mode. |
|
|
|
DISPLAY FX |
|
|
|
[ON], [OFF] |
Set the MIXTRAX special effects on/off. |
|
|
|
CUT IN FX |
|
|
|
[ON], [OFF] |
Turn the MIXTRAX sound effects on/off while |
|
|
manually changing the tracks. |
|
|
|
Connections/Installation
Connections
WARNING
•When speaker output is used by 4 channels, use speakers over 50 W (maximum input power) and between 4
Ωto 8 Ω (impedance value). Do not use 1
Ωto 3 Ω speakers for this unit.
•When rear speaker output is used by 2 Ω of subwoofer, use speakers over 70 W (maximum input power).
* Please refer to connections for a connection method.
•The black cable is ground. When installing this unit or power amp (sold separately), make sure to connect the ground wire first. Ensure that the ground wire is properly connected to metal parts of the car’s body. The ground wire of the power amp and the one of this unit or any other device must be connected to the car separately with different screws. If the screw for the ground wire loosens or falls out, it could result in fire, generation of smoke or malfunction.
Ground wire |
POWER AMP |
||
|
|
|
|
|
|
|
|
Other devices (Another electronic
Metal parts of
device in the car)
car’s body
*1 Not supplied for this unit
Important
•When installing this unit in a vehicle without an ACC (accessory) position on the ignition switch, failure to connect the
red cable to the terminal that detects operation of the ignition key may result in battery drain.
English
ACC position |
No ACC position |
•Use this unit with a 12-volt battery and negative grounding only. Failure to do so may result in a fire or malfunction.
•To prevent a short-circuit, overheating or malfunction, be sure to follow the directions below.
–Disconnect the negative terminal of the battery before installation.
–Secure the wiring with cable clamps or adhesive tape. Wrap adhesive tape around wiring that comes into contact with metal parts to protect the wiring.
–Place all cables away from moving parts, such as the shift lever and seat rails.
–Place all cables away from hot places, such as near the heater outlet.
–Do not connect the yellow cable to the battery by passing it through the hole to the engine compartment.
–Cover any disconnected cable connectors with insulating tape.
–Do not shorten any cables.
–Never cut the insulation of the power cable of this unit in order to share the power with other devices. The current capacity of the cable is limited.
–Use a fuse of the rating prescribed.
–Never wire the negative speaker cable directly to ground.
–Never band together negative cables of multiple speakers.
•When this unit is on, control signals are sent through the blue/white cable. Connect this cable to the system remote
En 19
control of an external power amp or the vehicle’s auto-antenna relay control terminal (max. 300mA 12 V DC). If the vehicle is equipped with a glass antenna, connect it to the antenna booster power supply terminal.
•Never connect the blue/white cable to the power terminal of an external power amp. Also, never connect it to the power terminal of the auto antenna. Doing so may result in battery drain or a malfunction.
•The graphical symbol 
placed on the product means direct current.
This unit
Power cord input
Microphone input
Microphone 3 m (9 ft. 10-1/8 in.)
Rear output or subwoofer output
Front output
Antenna input
Fuse (10 A)
Wired remote input
Hard-wired remote control adapter can be connected (sold separately).
Power cord
Perform these connections when not connecting a rear speaker lead to a subwoofer.
20En
Perform these connections when using a subwoofer without the optional amplifier.
Important
In the case of 
above, two 4 Ω subwoofers wired in parallel will represent a 2 Ω load.
To power cord input
Left
Right
Front speaker
Rear speaker
White
White/black
Gray
Gray/black
Green
Green/black
Violet
Violet/black
Black (chassis ground)
Connect to a clean, paint-free metal location.
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by the ignition switch (12 V DC).
Blue/white
Connect to the system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC).
Subwoofer (4 Ω)
When using a subwoofer of 2 Ω, be sure to connect the subwoofer to the violet and violet/black leads of this unit. Do not connect anything to the green and green/black leads.
Not used.
Subwoofer (4 Ω) × 2
Orange/white (Not available for DEHX3900BT/X3910BT)
Connect to a car’s illumination signal.
Power amp (sold separately)
Perform these connections when using the optional amplifier.
System remote control Connect to blue/white cable.
Power amp (sold separately)
Connect with RCA cables (sold separately)
To front output
Front speaker
To rear output or subwoofer output 
Rear speaker or subwoofer
Installation
Important
•Check all connections and systems before final installation.
•Do not use unauthorized parts as this may cause malfunctions.
•Consult your dealer if installation requires drilling of holes or other modifications to the vehicle.
•Do not install this unit where:
–it may interfere with operation of the vehicle.
–it may cause injury to a passenger as a result of a sudden stop.
•The semiconductor laser will be damaged if it overheats. Install this unit away from hot places such as near the heater outlet.
•Optimum performance is
obtained when the unit is installed at an angle of less than 60°.
•When installing, to ensure proper heat dispersal when using this unit, make sure you leave ample space behind the rear panel and wrap any loose cables so they are not blocking the vents.
Leave ample 5 cm 
space 
5 cm
DIN mount installation
1Insert the supplied mounting sleeve into the dashboard.
2Secure the mounting sleeve by using a screwdriver to bend the metal tabs (90°) into place.
Dashboard
Mounting sleeve
•Make sure that the unit is installed securely in place. An unstable installation may cause skipping or other malfunctions.
When not using the supplied mounting sleeve
1Determine the appropriate position where the holes on the bracket and the side of the unit match.
2 Tighten two screws on each side.
Screw
Mounting bracket
Dashboard or console
•Use either truss (5 mm × 9 mm) or flush surface (5 mm × 9 mm) screws, depending on the bracket screw holes.
Removing the unit (installed with the supplied mounting sleeve)
1 Remove the trim ring.
Trim ring
Notched tab
•Releasing the front panel allows easier access to the trim ring.
•When reattaching the trim ring, point the side with the notched tab down.
2Insert the supplied extraction keys into both sides of the unit until they click into place.
3 Pull the unit out of the dashboard.
To secure the front panel
The front panel can be secured with the supplied screw.
Screw
Installing the microphone
The microphone should be placed directly in front of the driver at a suitable distance to pick up their voice clearly.
CAUTION
It is extremely dangerous to allow the microphone lead to become wound around the steering column or shift lever. Be sure to install the microphone in such a way that it will not obstruct driving. It is
recommended to use the clamps (sold separately) to arrange the lead.
NOTE
Depending on the vehicle model, the microphone cable length may be too short when you mount the microphone on the sun visor. In such cases, install the microphone on the steering column.
To install on the sun visor
1Fit the microphone lead into the groove.
Microphone
lead
Groove
2Install the microphone clip on the sun visor.
Lowering the sun visor reduces the voice recognition rate.
Microphone clip
Microphone
Microphone clip
Microphone base
2Install the microphone on the rear side of the steering column.
Double-sided tape
English
To install on the steering column
1Slide the microphone base to detach it from the microphone clip.
En 21
Additional Information
Troubleshooting
The display automatically returns to the normal display.
→No operations have been made for about 30 seconds.
– Perform an operation.
The repeat play range changes unexpectedly.
→Depending on the repeat play range, the selected range may change when another folder or track is being selected or during fast forwarding/reversing.
– Select the repeat play range again.
A subfolder is not played back.
→Subfolders cannot be played when [FLD] (folder repeat) is selected.
– Select another repeat play range.
The sound is intermittent.
→You are using a device, such as a cellular phone, that may cause audible interference.
–Move electrical devices that may be causing the interference away from the unit.
The sound from the Bluetooth audio source is not played back.
→There is a call in progress on a Bluetooth-connected cellular phone.
–The sound will be played back when the call is terminated.
→A Bluetooth-connected cellular phone is currently being operated.
–Stop using the cellular phone.
→The connection between the unit and the cellular phone is not established correctly after a call made by a Bluetooth-connected cellular phone.
–Make a Bluetooth connection between the unit and the cellular phone again.
Error messages
Common
AMP ERROR
→This unit fails to operate or the speaker connection is incorrect.
→The protective circuit is activated.
–Check the speaker connection.
–Turn the ignition switch OFF and back to ON again. If the message remains, contact your dealer or an authorized Pioneer Service Station for assistance.
NO XXXX (NO TITLE, for example)
→There is no embedded text information.
–Switch the display or play another track/file.
CD player
ERROR-07, 11, 12, 17, 30
→The disc is dirty.
–Clean the disc.
→The disc is scratched.
–Replace the disc.
ERROR-07, 10, 11, 12, 15, 17, 30, A0
→There is an electrical or mechanical error.
–Turn the ignition switch OFF and back to ON, or switch to a different source, then back to the CD player.
ERROR-15
→The inserted disc is blank.
– Replace the disc.
ERROR-23
→ Unsupported CD format.
22En
– Replace the disc.
FORMAT READ
→Sometimes there is a delay between the start of playback and when you start to hear any sound.
–Wait until the message disappears and you hear sound.
NO AUDIO
→The inserted disc does not contain any playable files.
– Replace the disc.
SKIPPED
→The inserted disc contains DRM protected files.
– The protected files are skipped.
PROTECT
→All the files on the inserted disc are embedded with DRM.
– Replace the disc.
USB device/iPod
FORMAT READ
→Sometimes there is a delay between the start of playback and when you start to hear any sound.
–Wait until the message disappears and you hear sound.
NO AUDIO
→There are no songs.
–Transfer the audio files to the USB device and connect.
→The connected USB device has security enabled.
–Follow the USB device instructions to disable the security.
SKIPPED
→The connected USB device contains DRM protected files.
– The protected files are skipped.
PROTECT
→All the files on the connected USB device are embedded with DRM.
– Replace the USB device.
N/A USB
→The connected USB device is not supported by this unit.
–Disconnect your device and replace it with a compatible USB device.
HUB ERROR
→The USB device connected via a USB hub is not supported by this unit.
–Connect the USB device directly to this unit using a USB cable.
CHECK USB
→The USB connector or USB cable has short-circuited.
–Check that the USB connector or USB cable is not caught in something or damaged.
→The connected USB device consumes more than maximum allowable current.
–Disconnect the USB device and do not use it. Turn the ignition switch OFF and back to ACC or ON. Connect only compliant USB devices.
→The iPod operates correctly but does not charge.
–Make sure the connection cable for the iPod has not shorted out (e.g., not caught in metal objects). After checking, turn the ignition switch OFF and back to ON, or disconnect the iPod and reconnect.
ERROR-19
→Communication failed.
–Perform one of the following operations, then return to the USB source.
•Turn the ignition switch OFF and back to ON.
•Disconnect the USB device.
•Change to a different source.
→iPod failure.
–Disconnect the cable from the iPod. Once the iPod’s main menu is displayed, reconnect the iPod and reset it.
ERROR-23
→USB device was not formatted properly.
–Format the USB device with FAT12, FAT16 or FAT32.
ERROR-16
→The iPod firmware version is old.
–Update the iPod version.
→iPod failure.
–Disconnect the cable from the iPod. Once the iPod’s main menu is displayed, reconnect the iPod and reset it.
STOP
→There are no songs in the current list.
– Select a list that contains songs.
NOT FOUND
→No related songs.
– Transfer songs to the iPod.
Bluetooth device
ERROR-10
→The power failed for the Bluetooth module of the unit.
–Turn the ignition switch OFF and back to ACC or ON.
Pandora
ERROR-19
→Communication failed.
–Disconnect the cable from the device. Once the device’s main menu is displayed, reconnect the device and reset it.
START UP APP
→The Pandora application has not started running yet.
– Start up the Pandora application.
RATING ERROR
→The thumb rating operation was disabled.
–Run the same command for another track.
CAN'T SKIP
→The skip operation was disabled.
–Run the same command for another track.
TRY LATER
→Unable to save thumb rating.
→Unable to save BookMark.
→Unable to add station.
– Try again later.
MAINTENANCE
→Pandora system is undergoing maintenance.
– Try again later.
SKIP LIMIT
→Due to music licensing restrictions, Pandora limits the total number of skips per hour.
–Wait until Pandora allows you to skip again.
UPDATE APP
→This version of the Pandora application is not supported.
–Connect a device that has a compatible version of the Pandora application installed.
LOGIN ERROR
→Your Pandora account is not logged in.
–Disconnect the cable from the device, and log in to your Pandora account. Then reconnect the device.
CHECK DEVICE
→Device error message displayed in the Pandora application.
– Check the connected device.
PLEASE CREATE A STATION ON THE PHONE
→No station found.
–Create a station in the Pandora application on your connected device.
SELECT STN
→No station selected.
– Select a station.
NO BT DEVICE GO TO BT MENU TO REGISTER
→No Bluetooth device found.
–Connect the unit and the device via Bluetooth (page 8).
CONN. FAILED PRESS BAND KEY TO RETRY
→Bluetooth connection failed.
–Press BAND/ 
to make a connection again.
CHECK APP PRESS BAND KEY TO RETRY
→Connection to the Pandora application failed.
–Press BAND/ 
to make a connection again.
DISCONNECTED PRESS BAND KEY TO RETRY
→Bluetooth connection lost.
–Press BAND/ 
to make a connection again.
STATION FULL
→A new station cannot be added.
–Delete an old station to open a spot for a new one.
CAN.T DELETE
→The station could not be deleted.
–Run the same command for another station.
NO NETWORK
→The connected device is out of area.
– Connect the device to a network.
NO SERVICE IN THIS COUNTRY
→ The connected device is out of area.
– Connect the device to a network.
STN DELETED
→ The operation was disabled.
– Run the same command for another
station. |
English |
|
|
Apps |
|
NO BT DEVICE GO TO BT MENU TO
REGISTER
→No Bluetooth device found.
–Connect the unit and the device via Bluetooth (page 8).
CONN. FAILED PRESS BAND KEY TO
RETRY
→Bluetooth connection failed.
–Press BAND/ 
to make a connection again.
DISCONNECTED PRESS BAND KEY TO
RETRY
→Bluetooth connection failed.
–Press BAND/ 
to make a connection again.
CHECK APP
→Connection to the application failed.
–Follow the instructions that appear on the screen.
START UP APP
→The application has not started running yet.
–Operate the mobile device to start up the application.
Spotify
NO BT DEVICE GO TO BT MENU TO
REGISTER
→No Bluetooth device found.
–Connect the unit and the device via Bluetooth (page 8).
En 23
CONN. FAILED PRESS BAND KEY TO RETRY
→Bluetooth connection failed.
–Press BAND/ 
to make a connection again.
CHECK APP PRESS BAND KEY TO RETRY
→Connection to the Spotify application failed.
–Press BAND/ 
to make a connection again.
DISCONNECTED PRESS BAND KEY TO RETRY
→Bluetooth connection lost.
–Press BAND/ 
to make a connection again.
CHECK APP
→Connection to the Spotify application failed.
–Follow the instructions that appear on the screen.
Handling guidelines
Discs and player
•Use only discs that feature either of the following two logos.
•Use 12-cm discs.
•Use only conventional, fully circular discs.
•The following types of discs cannot be used with this unit:
–DualDiscs
–8-cm discs: Attempts to use such discs with an adaptor may cause the unit to malfunction.
–Oddly shaped discs
–Discs other than CDs
–Damaged discs, including discs that are cracked, chipped or warped
–CD-R/RW discs that have not been finalized
•Do not write on or apply chemicals to the surface of the discs.
•To clean a CD, wipe the disc with a soft cloth outward from the center.
•Condensation may temporarily impair the player’s performance. Let it rest for about one hour to adjust to a warmer temperature. Also, wipe any damp discs off with a soft cloth.
•When using discs that can be printed on label surfaces, check the instructions and the warnings of the discs. Depending on the discs, inserting and ejecting may not be possible. Using such discs may result in damage to this equipment.
•Do not attach commercially available labels or other materials to the discs.
–The discs may warp making the disc unplayable.
–The labels may come off during playback and prevent ejection of the discs, which may result in damage to the equipment.
USB storage device
•Connections via USB hubs are not supported.
•Firmly secure the USB storage device before driving. Do not let the USB storage device fall onto the floor, where it may become jammed under the brake or accelerator pedal.
•Depending on the USB storage device, the following problems may occur.
–Operations may vary.
–The storage device may not be recognized.
–Files may not be played back properly.
–The device may cause audible interference when you are listening to the radio.
iPod
•Do not leave the iPod in places with high temperatures.
•Firmly secure the iPod when driving. Do not let the iPod fall onto the floor, where it may become jammed under the brake or accelerator pedal.
•The settings of the iPod such as the equalizer and repeat play are changed automatically when the iPod is connected to the unit. Once the iPod is disconnected, those settings will return to the original settings.
•Incompatible text saved on the iPod will not be displayed by the unit.
Compressed audio compatibility
•Only the first 32 characters can be displayed as a file name (including the file extension) or a folder name.
•The unit may not work properly depending on the application used to encode WMA files.
•There may be a slight delay at the start of the playback of audio files embedded with image data, or audio files stored on a USB device with numerous folder hierarchies.
CAUTION
•Pioneer cannot guarantee compatibility with all USB mass storage devices, and assumes no responsibility for any loss of data on media players, smartphones, or other devices while using this product.
•Do not leave discs or a USB storage device in any place that is subject to high temperatures.
WMA files
File extension |
.wma |
Bit rate |
48 kbps to 320 kbps |
|
(CBR), 48 kbps to 384 |
|
kbps (VBR) |
Sampling frequency |
32 kHz, 44.1 kHz, 48 |
|
kHz |
|
|
Windows Media™ |
Not compatible |
Audio Professional, |
|
Lossless, Voice/DRM |
|
Stream/Stream with |
|
video |
|
|
|
MP3 files
File extension |
.mp3 |
Bit rate |
8 kbps to 320 kbps |
|
(CBR), VBR |
Sampling frequency |
8 kHz to 48 kHz (32 |
|
kHz, 44.1 kHz, 48 kHz |
|
for emphasis) |
|
|
Compatible ID3 tag |
1.0, 1.1, 2.2, 2.3, 2.4 |
version |
(ID3 tag Version 2.x is |
|
given priority over |
|
Version 1.x.) |
|
|
M3u playlist |
Not compatible |
|
|
MP3i (MP3 |
Not compatible |
interactive), mp3 PRO |
|
WAV files
•WAV file formats cannot be connected via MTP.
File extension |
.wav |
Quantization bits |
8 and 16 (LPCM), 4 |
|
(MSADPCM) |
|
|
Sampling frequency |
16 kHz to 48 kHz |
|
(LPCM), 22.05 kHz and |
|
44.1 kHz (MS ADPCM) |
|
|
AAC files
Compatible format |
AAC encoded by |
|
iTunes |
|
|
File extension |
.m4a |
|
|
Sampling frequency |
11.025 kHz to 48 kHz |
|
|
Transmission rate |
16 kbps to 320 kbps, |
|
VBR |
|
|
24En
Apple Lossless |
Not compatible |
AAC file bought from |
Not compatible |
the iTunes Store (.m4p |
|
file extension) |
|
Disc
•Regardless of the length of the blank section between the songs from the original recording, compressed audio discs play with a short pause between songs.
Playable folder |
Up to eight tiers (A |
hierarchy |
practical hierarchy is |
|
less than two tiers.) |
|
|
Playable folders |
Up to 99 |
|
|
Playable files |
Up to 999 |
|
|
File system |
ISO 9660 Level 1 and |
|
2, Romeo, Joliet |
|
|
Multi-session |
Compatible |
playback |
|
Packet write data |
Not compatible |
transfer |
|
|
|
USB device
•There may be a slight delay when starting playback of audio files on a USB storage device with numerous folder hierarchies.
Playable folder |
Up to eight tiers (A |
hierarchy |
practical hierarchy is |
|
less than two tiers.) |
Playable folders |
Up to 500 |
Playable files |
Up to 15 000 |
Playback of copyright- |
Not compatible |
protected files |
|
|
|
Partitioned USB |
Only the first partition |
device |
can be played. |
|
|
iPod compatibility
This unit supports only the following iPod models. Supported iPod software versions are shown below. Older versions may not be supported.
Made for
–iPod touch (1st through 6th generation)
–iPod classic
–iPod with video
–iPod nano (1st through 7th generation)
–iPhone 6s
–iPhone 6s Plus
–iPhone 6
–iPhone 6 Plus
–iPhone 5s
–iPhone 5c
–iPhone 5
–iPhone 4s
–iPhone 4
–iPhone 3GS
–iPhone 3G
–iPhone
•Operations may vary depending on the generation and/or software version of the iPod.
•Users of iPod with the Lightning Connector should use the Lightning to USB Cable (supplied with iPod).
•Users of iPod with the Dock Connector should use the CD-IU51. For details, consult your dealer.
•Refer to the iPod manuals for information about the file/format compatibility.
•Audiobook, Podcast: Compatible
CAUTION
Pioneer accepts no responsibility for data lost on the iPod, even if that data is lost while this unit is used.
Sequence of audio files
The user cannot assign folder numbers and specify playback sequences with this unit. Sequence of audio file depends on the connected device.
Note that the hidden files in a USB device cannot be played back.
Example of a hierarchy
Folder
Compressed |
audio file |
01 to 05: Folder number
to 
: Playback sequence
Copyright and trademark
Bluetooth
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by PIONEER CORPORATION is under license. Other trademarks and trade names are those of their respective owners.
iTunes
Apple and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries.
WMA
Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from Microsoft Licensing, Inc.
iPod & iPhone
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Lightning is a trademark of Apple Inc. “Made for iPod” and “Made for iPhone” mean that an electronic accessory has
been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.
Android & Google Play
Android, Google Play, and the Google Play logo are trademarks of Google Inc.
Pandora® internet radio
PANDORA, the PANDORA logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission.
Pandora is only available in certain countries. Please visit http://www.pandora.com/legal for more information.
MIXTRAX
MIXTRAX is a trademark of the PIONEER CORPORATION.
Spotify®
SPOTIFY and the Spotify logo are among the registered trademarks of Spotify AB. Compatible mobile digital devices and premium subscription required, where available, see https://www.spotify.com.
Specifications
General
Power source: 14.4 V DC (10.8 V to 15.1 V allowable)
Grounding system: Negative type Maximum current consumption: 10.0 A Dimensions (W × H × D):
DIN
Chassis: 178 mm × 50 mm × 165 mm (7 in. × 2 in. × 6-1/2 in.)
Nose: 188 mm × 58 mm × 17 mm (7- 3/8 in. × 2-1/4 in. × 5/8 in.)
English
En 25
D
Chassis: 178 mm × 50 mm × 165 mm (7 in. × 2 in. × 6-1/2 in.)
Nose: 170 mm × 46 mm × 17 mm (6- 3/4 in. × 1-3/4 in. × 5/8 in.)
Weight: 1 kg (2.2 lbs)
Audio
Maximum power output:
•50 W × 4 ch/4 Ω (for no subwoofer)
•50 W × 2 ch/4 Ω + 70 W × 1 ch/2 Ω
(for subwoofer) Continuous power output:
22 W × 4 (50 Hz to 15 000 Hz, 5 % THD, 4 Ω load, both channels driven)
Load impedance: 4 Ω (4 Ω to 8 Ω allowable) Preout maximum output level: 2.0 V Loudness contour: +10 dB (100 Hz), +6.5
dB (10 kHz) (volume: –30 dB) Equalizer (5-Band Graphic Equalizer):
Frequency: 80 Hz/250 Hz/800 Hz/2.5 kHz/8 kHz
Equalization range: ±12 dB (2 dB step) Subwoofer (mono):
Frequency: 50 Hz/63 Hz/80 Hz/100 Hz/125 Hz/160 Hz/200 Hz
Slope: –12 dB/oct, –24 dB/oct Gain: +6 dB to –24 dB
Phase: Normal/Reverse
CD player
System: Compact disc audio system Usable discs: Compact disc Signal-to-noise ratio: 94 dB (1 kHz) (IHF-A
network)
Number of channels: 2 (stereo)
MP3 decoding format: MPEG-1 & 2 Audio Layer 3
WMA decoding format: Ver. 7, 7.1, 8, 9, 10, 11, 12 (2 ch audio) (Windows Media Player)
AAC decoding format: MPEG-4 AAC (iTunes encoded only) (Ver. 10.6 and earlier)
WAV signal format: Linear PCM & MS ADPCM (Non-compressed)
26En
USB
USB standard specification: USB 2.0 full speed
Maximum current supply: 1.5 A USB Protocol:
MSC (Mass Storage Class) MTP (Media Transfer Protocol)
AOA (Android Open Accessory) 2.0 File system: FAT12, FAT16, FAT32
MP3 decoding format: MPEG-1 & 2 Audio Layer 3
WMA decoding format: Ver. 7, 7.1, 8, 9, 10, 11, 12 (2 ch audio) (Windows Media Player)
AAC decoding format: MPEG-4 AAC (iTunes encoded only) (Ver. 10.6 and earlier)
WAV signal format: Linear PCM & MS ADPCM (Non-compressed)
FM tuner
Frequency range: 87.9 MHz to 107.9 MHz Usable sensitivity: 11 dBf (1.0 μV/75 Ω,
mono, S/N: 30 dB)
Signal-to-noise ratio: 72 dB (IHF-A network)
AM tuner
Frequency range: 530 kHz to 1 710 kHz Usable sensitivity: 25 μV (S/N: 20 dB) Signal-to-noise ratio: 62 dB (IHF-A network)
Bluetooth
Version: Bluetooth 3.0 certified
Output power: +4 dBm Maximum (Power class 2)
Frequency band(s): 2 400 MHz to 2 483.5 MHz
Bluetooth profiles:
GAP (Generic Access Profile)
SDAP (Service Discovery Application Profile)
OPP (Object Push Profile) HFP (Hands Free Profile) 1.6
PBAP (Phone Book Access Profile) A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control
Profile) 1.5
SPP (Serial Port Profile) 1.1
CEA2006 Specifications
Power output: 14 W RMS × 4 Channels (4 Ω and <= 1 % THD+N)
S/N ratio: 91 dBA (reference: 1 W into 4 Ω)
NOTE
Specifications and the design are subject to modifications without notice.
Loading...