High power CD player with RDS tuner
Operation Manual
DEH-2330R
DEH-2300R
DEH-2300RB
DEH-1330R
DEH-1300R
NEDERLANDS ITALIANO FRANÇAIS DEUTSCH ESPAÑOL ENGLISH
Contents |
|
Key Finder .................................................... |
2 |
- Head Unit |
|
Before Using This Product ...................... |
3 |
About This Product .......................................... |
3 |
About This Manual ............................................ |
3 |
Precaution .......................................................... |
4 |
In Case of Trouble ............................................ |
4 |
Basic Operation ........................................ |
5 |
To Listen to Music ............................................ |
5 |
Basic Operation of Tuner .................................. |
6 |
- Manual and Seek Tuning |
|
- Preset Tuning |
|
- Band |
|
Basic Operation of Built-in CD Player ............ |
7 |
-CD Loading Slot
-Eject
-Track Search and Fast Forward/Reverse
Tuner Operation ........................................ |
8 |
-Local Seek Tuning
-Best Stations Memory (BSM)
Using RDS Functions ................................ |
9 |
What is RDS? .................................................... |
9 |
Program Service Name Display ........................ |
9 |
AF Function .................................................... |
10 |
- Activating/Deactivating the AF Function |
|
PI Seek Function ............................................ |
11 |
- PI Seek |
|
- Auto PI Seek (for preset station) |
|
Regional Function .......................................... |
11 |
- Activating/Deactivating the REG Function |
|
TA Function .................................................... |
12 |
-Activating/Deactivating the TA Function
-Canceling Traffic Announcements
-Adjusting the TA Volume
-TP Alarm Function
PTY Function .................................................. |
14 |
-PTY Search Setting Function
-PTY Search Function
-PTY Alarm
-Canceling Emergency Announcements
Using the Built-in CD Player .................. |
17 |
-Repeat Play
-Random Play
-Scan Play
-Pause
Audio Adjustment .................................... |
18 |
Selecting the Equalizer Curve .......................... |
18 |
Entering the Audio Menu ................................ |
18 |
Audio Menu Functions .................................... |
19 |
-Balance Adjustment (FAD)
-Equalizer Curve Adjustment (EQ-L/EQ-M/EQ-H)
-Loudness Adjustment (LOUD)
-Front Image Enhancer Function (FIE)
-Source Level Adjustment (SLA)
Detaching and Replacing |
|
the Front Panel .................................. |
22 |
Theft Protection .............................................. |
22 |
-Detaching the Front Panel
-Replacing the Front Panel
Initial Setting ............................................ |
23 |
Entering the Initial Setting Menu .................... |
23 |
Initial Setting Menu Functions ........................ |
24 |
-Changing the FM Tuning Step (STEP)
-Switching the Auto PI Seek (A-PI)
Other Functions ........................................ |
25 |
Cellular Telephone Muting ............................ |
25 |
CD Player and Care .................................. |
26 |
Precaution ........................................................ |
26 |
Built-in CD Player’s Error Message .............. |
27 |
Specifications .......................................... |
28 |
1
Key Finder
Head Unit
|
+/– buttons |
LOCAL/BSM button |
EQ button |
CD loading slot |
EJECT button |
|
|
AUDIO button |
|
|
BAND button |
TA button |
|
Detach button |
|
Buttons 1–6 |
5/°/2/3buttons |
SOURCE button |
PTY button |
NEDERLANDS ITALIANO FRANÇAIS DEUTSCH ESPAÑOL ENGLISH
2
Before Using This Product
About This Product
•This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC).
The tuner frequencies on this product are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. Use in other areas may result in improper reception. The RDS function operates only in areas with FM stations broadcasting RDS signals.
About This Manual
This product features a number of sophisticated functions ensuring superior reception and operation. All are designed for the easiest possible use, but many are not self-explanatory. This operation manual is intended to help you benefit fully from their potential and to maximize your listening enjoyment.
We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you use this product. It is especially important that you read and observe the “Precaution” on the next page and in other sections.
3
Precaution
• A “CLASS 1 LASER PRODUCT” label is affixed to the bottom of the player.
•The Pioneer CarStereo-Pass is for use only in Germany.
•Keep this manual handy as a reference for operating procedures and precautions.
•Always keep the volume low enough for outside sounds to be audible.
•Protect this product from moisture.
•If the battery is disconnected, the preset memory will be erased and must be reprogrammed.
In Case of Trouble
Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station.
NEDERLANDS ITALIANO FRANÇAIS DEUTSCH ESPAÑOL ENGLISH
4
Basic Operation
To Listen to Music
The following explains the initial operations required before you can listen to music.
Note:
• Loading a disc in this product. (Refer to page 7.)
1.Select the desired source (e.g. Tuner).
Each press changes the Source ...
Each press of the SOURCE button selects the desired source in the following order: Built-in CD player =Tuner
Note:
•When no disc is set in this product, built-in CD player source will not change.
•When this product’s blue/white lead is connected to the car’s Auto-antenna relay control terminal, the car’s Auto-antenna extends when this product’s source is switched ON. To retract the antenna, switch the source OFF.
2.Raise or lower the volume.
3.Turn the source OFF.
Hold for 1 second
5
Basic Operation of Tuner
This product’s AF function can be switched ON and OFF. AF should be switched OFF for normal tuning operations. (Refer to page 10.)
Manual and Seek Tuning
•You can select the tuning method by changing the length of time you press the 2/3button.
Manual Tuning (step by step) |
0.5 seconds or less |
Seek Tuning |
0.5 seconds or more |
Note:
•If you continue pressing the button for longer than 0.5 seconds, you can skip broadcast stations. Seek Tuning starts as soon as you release the button.
•Stereo indicator “ð” lights when a stereo station is selected.
Frequency Indicator
Band Indicator |
Preset Number Indicator |
FRANÇAIS DEUTSCH ESPAÑOL ENGLISH
Preset Tuning
•You can memorize broadcast stations in buttons 1 through 6 for easy, one-touch station recall.
Preset station recall |
2 seconds or less |
Broadcast station preset memory |
2 seconds or more |
Note:
•Up to 12 FM stations (6 in F1 (FM1) and F2 (FM2)) and 6 MW/LW stations can be stored in memory.
•You can also use the 5or °buttons to recall broadcast stations memorized in buttons 1 through 6.
Band
F1 (FM1)
=F2 (FM2)
=MW/LW
NEDERLANDS ITALIANO
6
Basic Operation
Basic Operation of Built-in CD Player
CD Loading Slot
Note:
•The built-in CD player plays one standard 12 cm or 8 cm (single) CD at a time. Do not use an adapter when playing 8 cm CD.
•Don’t insert any materials except for CD into CD loading slot.
Track Number Indicator
Track Search and Fast Forward/Reverse
Eject
Note:
•The CD function can be turned ON/OFF with the disc remaining in this product. (Refer to page 5.)
•A disc left partially inserted after ejection may incur damage or fall out.
Play Time Indicator
•You can select between Track Search or Fast Forward/Reverse by pressing the 2/3button for a different length of time.
Track Search |
0.5 seconds or less |
Fast Forward/Reverse |
Continue pressing |
Note:
•If a disc cannot be inserted fully or playback fails, make sure the recorded side is down. Push the EJECT button and check the disc for damage before reinserting it.
•If a disc is inserted with the recorded side up, it will be ejected automatically after a few moments.
•If the built-in CD player cannot operate properly, an error message (such as “ERROR-14”) appears on the display. Refer to “Built-in CD Player’s Error Message” on page 27.
7
Tuner Operation
Local Seek Tuning
This function selects only stations with especially strong signals.
• Switch the Local ON/OFF
with the LOCAL/BSM button.
“LOC”
Best Stations Memory (BSM)
The BSM function stores stations in memory automatically.
• Press the LOCAL/BSM button for 2 seconds to switch BSM ON.
The stations with the strongest signals will be stored under buttons 1–6 and in order of their signal strength.
•To cancel the process, press the LOCAL/BSM button before memorization is complete.
NEDERLANDS ITALIANO FRANÇAIS DEUTSCH ESPAÑOL ENGLISH
8