Pioneer DEH-34UB, DEH-3400UB, DEH-2400UB, DEH-24UB User Manual 2

0 (0)

CD RDS RECEIVER

AUTORADIO CD RDS

REPRODUCTOR DE CD CON RECEPTOR RDS

DEH-3400UB

DEH-2400UB

DEH-34UB

DEH-24UB

Español Français English

Owner’s Manual

Mode d’emploi Manual de instrucciones

Section

 

 

 

 

01

 

 

Before you start

 

 

 

 

Thank you for purchasing this PIONEER

the following measures:

 

 

 

 

 

 

product

- Reorient or relocate the receiving antenna.

 

 

To ensure proper use, please read through this

- Increase the separation between the equip-

 

 

manual before using this product. It is especially

ment and receiver.

 

 

important that you read and observe WARN-

- Connect the equipment into an outlet on a cir-

 

 

INGs and CAUTIONs in this manual. Please

cuit different from that to which the receiver is

 

 

keep the manual in a safe and accessible place for

connected.

 

 

future reference.

- Consult the dealer or an experienced radio/TV

 

 

 

 

technician for help.

 

 

This device complies with Part 15 of the FCC

The Safety of Your Ears is in

 

 

Rules. Operation is subject to the following

 

 

two conditions:

Your Hands

 

 

(1) this device may not cause harmful interfer-

Get the most out of your equipment by playing it

 

 

ence, and (2) this device must accept any in-

 

 

at a safe level—a level that lets the sound come

 

 

terference received, including interference

 

 

through clearly without annoying blaring or dis-

 

 

that may cause undesired operation.

 

 

tortion and, most importantly, without affecting

 

 

 

 

 

 

 

 

your sensitive hearing. Sound can be deceiving.

 

 

Information to User

Over time, your hearing “comfort level” adapts to

 

 

higher volumes of sound, so what sounds “nor-

 

 

 

 

 

 

Alteration or modifications carried out with-

mal” can actually be loud and harmful to your

 

 

hearing. Guard against this by setting your

 

 

out appropriate authorization may invalidate

equipment at a safe level BEFORE your hearing

 

 

the user’s right to operate the equipment.

adapts.

 

 

Note

ESTABLISH A SAFE LEVEL:

 

 

! Set your volume control at a low setting.

 

 

This equipment has been tested and found to

 

 

! Slowly increase the sound until you can hear

 

 

comply with the limits for a Class B digital de-

 

 

it comfortably and clearly, without distortion.

 

 

vice, pursuant to Part 15 of the FCC Rules. These

 

 

! Once you have established a comfortable

 

 

limits are designed to provide reasonable protec-

 

 

sound level, set the dial and leave it there.

 

 

tion against harmful interference in a residential

 

 

 

 

 

 

installation. This equipment generates, uses and

BE SURE TO OBSERVE THE

 

 

can radiate radio frequency energy and, if not in-

 

 

FOLLOWING GUIDELINES:

 

 

stalled and used in accordance with the instruc-

 

 

! Do not turn up the volume so high that you

 

 

tions, may cause harmful interference to radio

 

 

can’t hear what’s around you.

 

 

communications. However, there is no guaran-

 

 

! Use caution or temporarily discontinue use

 

 

tee that interference will not occur in a particu-

 

 

in potentially hazardous situations.

 

 

lar installation. If this equipment does cause

 

 

! Do not use headphones while operating a

 

 

harmful interference to radio or television recep-

 

 

motorized vehicle; the use of headphones

 

 

tion, which can be determined by turning the

 

 

may create a traffic hazard and is illegal in

 

 

equipment off and on, the user is encouraged to

 

 

many areas.

 

 

try to correct the interference by one or more of

 

 

 

 

Before you start

About this unit

Important (Serial number)

The tuner frequencies on this unit are allocated

The serial number is located on the bottom of

for use in North America. Use in other areas

this unit. For your own security and conven-

may result in poor reception.

ience, be sure to record this number on the enclosed warranty card.

WARNING

Note

Function setting operations are completed even

Handling the cord on this product or cords asso-

if the menu is cancelled before the operations

ciated with accessories sold with the product

are confirmed.

may expose you to chemicals listed on proposi-

 

tion 65 known to the State of California and

About this manual

other governmental entities to cause cancer and

birth defect or other reproductive harm. Wash

! In the following instructions, USB memories

hands after handling.

and USB audio players are collectively re-

 

 

ferred to as “USB storage device”.

CAUTION:

! In this manual, iPod and iPhone will be re-

USE OF CONTROL OR ADJUSTMENT OR

ferred to as “iPod”.

PERFORMANCE OF PROCEDURES

 

OTHER THAN THOSE SPECIFIED HEREIN

Demo mode

MAY RESULT IN HAZARDOUS RADIATION

 

EXPOSURE.

Important

CAUTION:

! Failure to connect the red lead (ACC) of this

THE USE OF OPTICAL INSTRUMENTS

unit to a terminal coupled with ignition

WITH THIS PRODUCT WILL INCREASE

switch on/off operations may lead to battery

EYE HAZARD.

drain.

 

! Remember that if the feature demo contin-

 

ues operating when the car engine is turned

CAUTION

off, it may drain battery power.

 

! Do not allow this unit to come into contact

The demo starts automatically if you do not oper-

with liquids. Electrical shock could result.

ate this unit within about 30 seconds since the

Also, damage to this unit, smoke, and over-

unit was last operated or if the ignition switch is

heating could result from contact with

set to ACC or ON while the unit is turned off. To

liquids.

cancel the demo mode, you need to display the

! Always keep the volume low enough to hear

initial settings. Select DEMO (demo display set-

outside sounds.

ting) and turn off the demo display. For details,

! Avoid exposure to moisture.

refer to Initial settings on page 9.

! If the battery is disconnected or discharged,

 

any preset memory will be erased.

 

2 En

Pioneer DEH-34UB, DEH-3400UB, DEH-2400UB, DEH-24UB User Manual 2

Before you start

After-sales service for

http://www.pioneerelectronics.ca

Pioneer products

! Learn about product updates (such as firm-

ware updates) for your product.

 

Please contact the dealer or distributor from

! Register your product to receive notices

where you purchased this unit for after-sales

about product updates and to safeguard pur-

service (including warranty conditions) or any

chase details in our files in the event of loss

other information. In case the necessary infor-

or theft.

mation is not available, please contact the com-

! Access owner’s manuals, spare parts infor-

panies listed below:

mation, service information, and much

Please do not ship your unit to the companies at

more.

the addresses listed below for repair without ad-

 

vance contact.

 

U.S.A.

 

Pioneer Electronics (USA) Inc.

 

CUSTOMER SUPPORT DIVISION

 

P.O. Box 1760

 

Long Beach, CA 90801-1760

 

800-421-1404

 

CANADA

 

Pioneer Electronics of Canada, Inc.

 

CUSTOMER SATISFACTION DEPARTMENT

 

340 Ferrier Street

 

Unit 2

 

Markham, Ontario L3R 2Z5, Canada

 

1-877-283-5901

 

905-479-4411

 

For warranty information please see the Limited

 

Warranty sheet included with this unit.

 

In case of trouble

 

Should this unit fail to operate properly, please

 

contact your dealer or nearest authorized

 

PIONEER Service Station.

 

Visit our website

 

http://www.pioneerelectronics.com

 

in Canada

 

 

 

 

 

 

 

 

 

 

 

Section

 

Operating this unit

 

 

 

 

 

 

01

 

 

 

 

 

 

 

 

 

 

02

Head unit

 

6

 

Part

 

 

Part

 

English

 

12 3 4 5

 

3

(M.C.)

 

a

control)

 

DEH-3400UB and DEH-34UB

 

 

MULTI-CONTROL

 

BAND/

(iPod

 

 

 

 

 

 

 

 

 

 

 

 

4

SRC/OFF

 

b

1 to 6

 

 

 

 

 

 

5

Disc loading slot

 

c

(clock)

 

 

 

 

 

 

 

 

 

 

AUX input jack

 

 

 

 

 

6

USB port

 

d

(3.5 mm stereo

 

 

78 9 a

b

c de

 

 

 

 

jack)

 

 

 

 

 

 

 

Detach button

 

 

 

 

 

7

 

 

e

 

 

Part

 

Part

 

 

 

 

 

 

 

1

h (eject)

8

(back/display)

 

CAUTION

 

 

 

 

 

2

(list)

9

c/d

! Use an optional Pioneer USB cable (CD-

 

 

U50E) to connect the USB audio player/USB

 

 

 

 

 

 

 

3

MULTI-CONTROL

a

BAND/ (iPod

 

memory as any device connected directly to

 

 

(M.C.)

 

control)

 

the unit will protrude out from the unit and

 

4

SRC/OFF

b

1 to 6

 

may be dangerous.

 

 

 

 

 

! Do not use unauthorized products.

 

 

 

 

 

 

 

 

5

Disc loading slot

c

(clock)

 

 

 

 

 

 

 

 

 

 

AUX input jack

Remote control

 

 

 

6

USB port

d

(3.5 mm stereo

 

 

 

 

 

 

 

 

 

 

 

 

 

jack)

 

 

f

 

 

 

7

(color)

e

Detach button

 

 

 

 

 

 

 

DEH-2400UB and DEH-24UB

 

9

g

 

a

 

 

h

12 3 4 5

6

m

i

 

 

l

 

 

 

 

 

4

j

k

 

78 9 a

b

c de

 

 

 

 

 

Part

 

Part

1

h (eject)

8

(back/display)

 

 

 

 

2

(list)

9

c/d

 

 

 

 

 

Part

Operation

f

VOLUME

Press to increase or decrease

volume.

 

 

 

 

 

g

MUTE

Press to mute. Press again to

unmute.

 

 

 

 

 

En 3

Section

02 Operating this unit

 

 

 

 

 

 

 

 

Part

Operation

 

 

 

 

Press to recall preset stations.

 

 

h

a/b

Press to select the next/pre-

 

 

 

 

vious folder.

 

 

 

 

 

 

 

i

AUDIO

Press to select an audio func-

 

 

tion.

 

 

 

 

 

 

 

 

 

 

 

 

 

Press to select different dis-

 

 

j

DISP/SCRL

plays.

 

 

Press and hold to turn dimmer

 

 

 

 

on or off.

 

 

 

 

 

 

 

k

e

Press to pause or resume play-

 

 

back.

 

 

 

 

 

 

 

 

 

 

 

l

FUNC-

Press to select functions.

 

 

 

TION

 

 

 

 

 

Press to display the disc title,

 

 

 

 

track title, folder, or file list de-

 

 

 

LIST/

pending on the source.

 

 

m

Press to display the list de-

 

 

 

ENTER

pending on the source.

 

 

 

 

 

 

 

 

While in the operating menu,

 

 

 

 

press to control functions.

 

 

 

 

 

 

Indicator

State

 

Main dis-

! Tuner: band and frequency

 

! Built-in CD, USB storage

1

play sec-

device and iPod: elapsed

 

tion

playback time and text in-

 

 

formation

2

(list)

The list function is being oper-

ated.

 

 

 

 

 

3

LOC

Local seek tuning is on.

 

 

 

4

(re-

Track or folder repeat is on.

peat)

 

 

 

 

(ran-

Random play is on.

 

The iPod source is selected

5

dom/shuf-

and the shuffle or shuffle all

 

fle)

 

function is on.

 

 

 

 

 

6

(sound re-

The sound retriever function is

on.

 

triever)

 

 

 

 

 

7

(iPod

This unit’s iPod function is op-

control)

erated from your iPod.

Display indication

 

 

Set up menu

 

 

 

1

 

 

 

 

When you turn the ignition switch to ON after in-

 

 

 

 

 

 

 

stallation, set up menu appears on the display.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You can set up the menu options below.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 After installation of this unit, turn the

 

 

 

 

 

 

 

 

 

ignition switch to ON.

 

3

 

5 6

7

 

 

SET UP appears.

2

 

4

 

 

 

 

 

 

 

 

 

 

2 Turn M.C. to switch to YES. Press M.C. to select.

# If you do not operate for 30 seconds, the set up menu will not be displayed.

# If you prefer not to set up at this time, turn M.C. to switch to NO. Press to select.

4 En

Operating this unit

If you select NO, you cannot set up in the set up menu.

3 Perform the following procedures to set the menu.

To proceed to the next menu option, you need to confirm your selection.

CLOCK SET (setting the clock)

1Turn M.C. to adjust hour.

2Press M.C. to select minute.

3Turn M.C. to adjust minute.

4Press M.C. to confirm the selection.

DEMO (demo display setting)

1Turn M.C. to set the demo display to on or off.

2Press M.C. to confirm the selection. QUIT appears.

4 To finish your settings, turn M.C. to select YES. Press to select.

# If you prefer to change your setting again, turn M.C. to switch to NO. Press to select.

Notes

!You can set up the menu options in the initial settings. For details about the settings, refer to Initial settings on page 9.

!You can cancel set up menu by pressing

SRC/OFF.

Basic operations

Important

!Handle gently when removing or attaching the front panel.

!Avoid subjecting the front panel to excessive shock.

!Keep the front panel out of direct sunlight and high temperatures.

!To avoid damaging the device or vehicle interior, remove any cables and devices attached to the front panel before detaching it.

Removing the front panel to protect your unit from theft

1Press the detach button to release the front panel.

2Push the front panel upward (M) and then pull it toward (N) you.

3Always keep the detached front panel in a protection device such as a protection case.

Re-attaching the front panel

1Slide the front panel to the left.

Make sure to insert the tabs on the left side of the head unit into the slots on the front panel.

2Press the right side of the front panel until it is firmly seated.

If you cannot attach the front panel to the head unit successfully, make sure that you are placing the front panel onto the head unit correctly. Forcing the front panel into place may result in damage to the front panel or head unit.

Turning the unit on

1 Press SRC/OFF to turn the unit on.

Turning the unit off

1Press and hold SRC/OFF until the unit turns off.

Operating this unit

Selecting a source

1Press SRC/OFF to cycle between:

TUNER (tuner)—CD (built-in CD player)—USB (USB)/iPod (iPod)—AUX (AUX)

Adjusting the volume

1 Turn M.C. to adjust the volume.

CAUTION

For safety reasons, park your vehicle when removing the front panel.

Note

When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off.

Use and care of the remote control

Using the remote control

1Point the remote control in the direction of the front panel to operate.

When using for the first time, pull out the film protruding from the tray.

Replacing the battery

1Slide the tray out on the back of the remote control.

2Insert the battery with the plus (+) and minus (–) poles aligned properly.

WARNING

!Keep the battery out of the reach of children. Should the battery be swallowed, consult a doctor immediately.

!Batteries (battery pack or batteries installed) must not be exposed to excessive heat such as sunshine, fire or the like.

CAUTION

!Use one CR2025 (3 V) lithium battery.

!Remove the battery if the remote control is not used for a month or longer.

!There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.

!Do not handle the battery with metallic tools.

!Do not store the battery with metallic objects.

!If the battery leaks, wipe the remote control completely clean and install a new battery.

!When disposing of used batteries, comply with governmental regulations or environmental public institutions’ rules that apply in your country/area.

!“Perchlorate Material – special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/ perchlorate. (Applicable to California, U.S.A.)”

Important

!Do not store the remote control in high temperatures or direct sunlight.

!The remote control may not function properly in direct sunlight.

!Do not let the remote control fall onto the floor, where it may become jammed under the brake or accelerator pedal.

 

 

 

 

 

 

Section

 

Operating this unit

 

 

 

 

02

Menu operations identical

 

 

 

 

 

 

 

 

 

 

 

 

 

Manual tuning (step by step)

 

 

for set up menu/function

 

1

Press c or d.

 

English

settings/audio adjustments/

 

!

you cannot tune up or down manually. You

 

 

 

 

If PCH (preset channel) is selected in SEEK,

 

 

initial settings/lists

 

 

need to select MAN (manual tuning) in SEEK.

 

 

 

 

 

 

For details about the settings, refer to SEEK

 

 

Returning to the previous display

 

 

(left/right key setting) on the next page.

 

 

Returning to the previous list (the folder one level

 

 

 

 

 

 

 

Seeking

 

 

higher)

 

 

 

 

1

Press and hold c or d, and then release.

 

 

1 Press .

 

 

 

 

 

You can cancel seek tuning by briefly pressing

 

 

 

 

 

 

 

 

Returning to the ordinary display

 

 

 

 

 

 

c or d.

 

 

Canceling the initial setting menu/set up menu

 

 

While pressing and holding c or d, you can

 

 

1 Press BAND/ .

 

 

skip stations. Seek tuning starts as soon as

 

 

Returning to the ordinary display from the list

 

 

you release c or d.

 

 

 

 

 

 

 

 

1 Press BAND/ .

 

 

 

 

 

 

 

 

 

Storing and recalling stations

 

 

 

 

 

 

Tuner

 

for each band

 

 

 

Using preset tuning buttons

 

 

Basic operations

 

 

 

 

1 When you find a station that you want

 

 

 

 

 

 

 

 

 

 

to store in memory, press one of the preset

 

 

Selecting a band

 

 

 

tuning buttons (1 to 6) and hold until the

 

 

1 Press BAND/ until the desired band (F1, F2,

 

 

 

 

preset number stops flashing.

 

 

 

F3 for FM or AM) is displayed.

 

 

 

 

 

 

 

 

 

 

Recalling preset stations

 

2 Press one of the preset tuning buttons (1

 

 

1 Press c or d.

 

to 6) to select the desired station.

 

 

! If MAN (manual tuning) is selected in SEEK,

 

Switching the display

 

 

 

you cannot recall preset stations. You need to

 

 

 

 

select PCH (preset channel) in SEEK. For de-

 

 

 

 

 

 

 

tails about the settings, refer to SEEK (left/right

 

Selecting the desired text information

 

 

 

key setting) on the next page.

 

1

Press .

 

 

 

 

 

 

Program service name/frequency—song title/

 

 

 

 

 

 

artist name—entertainment—frequency

 

 

 

 

 

!

Depending on the band, text information can

 

 

 

 

 

 

be changed.

 

 

 

 

 

!

Text information items that can be changed

 

 

 

 

 

 

depend on the area.

 

 

 

 

 

 

 

 

 

 

Function settings

1 Press M.C. to display the main menu.

En 5

Section

 

 

 

 

 

 

02

 

 

Operating this unit

 

 

 

 

 

 

2 Turn M.C. to change the menu option

 

CD/CD-R/CD-RW and USB

 

 

 

 

 

 

 

 

and press to select FUNCTION.

 

storage devices

 

 

 

 

 

 

 

3 Turn M.C. to select the function.

 

Basic operations

 

 

After selecting, perform the following proce-

 

 

 

 

 

 

dures to set the function.

 

Playing a CD/CD-R/CD-RW

 

 

 

 

 

 

 

 

 

 

1

Insert the disc into the disc loading slot with

 

 

BSM (best stations memory)

 

 

 

 

the label side up.

 

 

BSM (best stations memory) automatically stores

 

 

 

 

 

 

 

Ejecting a CD/CD-R/CD-RW

 

 

the six strongest stations in the order of their sig-

 

 

 

 

1

Press h.

 

 

nal strength.

 

 

 

 

 

 

 

 

 

 

Playing songs on a USB storage device

 

 

1 Press M.C. to turn BSM on.

 

 

 

 

To cancel, press M.C. again.

 

1

Open the USB port cover.

 

 

 

 

 

2

Plug in the USB storage device using a USB

 

 

LOCAL (local seek tuning)

 

 

 

 

cable.

 

 

Local seek tuning lets you tune in to only those

 

 

A song will be played automatically.

 

 

radio stations with sufficiently strong signals for

 

Stopping playback of files on a USB storage de-

 

 

good reception.

 

 

 

 

vice

 

 

1 Press M.C. to select the desired setting.

 

 

 

 

1

You may disconnect the USB storage device at

 

 

 

FM: OFF—LV1—LV2—LV3—LV4

 

 

 

 

 

 

any time.

 

 

 

AM: OFF—LV1—LV2

 

 

 

 

 

 

 

The unit stops playback.

 

 

 

The highest level setting allows reception of

 

 

 

 

 

 

Selecting a folder

 

 

 

only the strongest stations, while lower levels

 

 

 

 

allow the reception of weaker stations.

 

1

Press 1/ or 2/ .

 

 

SEEK (left/right key setting)

 

Selecting a track

 

 

You can assign a function to the left and right keys

 

1

Press c or d.

 

 

 

 

 

 

 

 

 

Fast forwarding or reversing

 

 

of the unit.

 

 

 

Select MAN (manual tuning) to tune up or down

 

1

Press and hold c or d.

 

 

manually or select PCH (preset channel) to switch

 

!

When playing compressed audio, there is no

 

 

between preset channels.

 

 

sound during fast forward or reverse.

 

 

1 Press M.C. to select MAN or PCH.

 

Returning to root folder

 

 

 

 

 

 

 

 

 

 

1

Press and hold BAND/ .

 

 

 

 

 

 

 

 

 

 

 

 

Switching between compressed audio and CD-DA

 

 

 

 

 

1

Press BAND/ .

 

 

 

 

 

 

 

 

 

 

 

 

Switching between playback memory devices

 

 

 

 

 

You can switch between playback memory devices

 

 

 

 

 

on USB storage devices with more than one Mass

 

 

 

 

 

Storage Device-compatible memory device.

 

 

 

 

 

1

Press BAND/ .

 

 

 

 

 

!

You can switch between up to 32 different

 

 

 

 

 

 

memory devices.

6

 

En

 

 

 

 

Operating this unit

Note

Disconnect USB storage devices from the unit when not in use.

Displaying text information

Selecting the desired text information 1 Press .

!Depending on the version of iTunes used to write MP3 files to a disc or media file types, incompatible text stored within an audio file may be displayed incorrectly.

!Text information items that can be changed depend on the media.

Selecting and playing files/ tracks from the name list

1Press to switch to the file/track name list mode.

2Use M.C. to select the desired file name (or folder name).

Changing the file or folder name 1 Turn M.C.

Playing

1 When a file or track is selected, press M.C.

Viewing a list of the files (or folders) in the selected folder

1 When a folder is selected, press M.C.

Playing a song in the selected folder

1 When a folder is selected, press and hold M.C.

Advanced operations using special buttons

Selecting a repeat play range

1Press 6/ to cycle between the following:

CD/CD-R/CD-RW

!ALL – Repeat all tracks

!ONE – Repeat the current track

!FLD – Repeat the current folder

USB audio player/USB memory

!ALL – Repeat all files

!ONE – Repeat the current file

!FLD – Repeat the current folder

Playing tracks in random order

1Press 5/ to turn random play on or off. Tracks in a selected repeat range are played in

random order.

!To change songs during random play, press d to switch to the next track. Pressing c restarts playback of the current track from the beginning of the song.

Pausing playback

1 Press 4/PAUSE to pause or resume.

Enhancing compressed audio and restoring rich sound (sound retriever)

1Press 3/S.Rtrv to cycle between:

1—2—OFF (off)

1 is effective for low compression rates, and 2 is effective for high compression rates.

Function settings

1Press M.C. to display the main menu.

2Turn M.C. to change the menu option and press to select FUNCTION.

3Turn M.C. to select the function.

After selecting, perform the following procedures to set the function.

Operating this unit

REPEAT (repeat play)

1Press M.C. to select a repeat play range.

For details, refer to Selecting a repeat play range on the previous page.

RANDOM (random play)

1 Press M.C. to turn random play on or off.

PAUSE (pause)

1 Press M.C. to pause or resume.

S.RTRV (sound retriever)

Automatically enhances compressed audio and restores rich sound.

1Press M.C. to select the desired setting. For details, refer to Enhancing compressed

audio and restoring rich sound (sound retriever) on the previous page.

iPod

Basic operations

Playing songs on an iPod

1Open the USB port cover.

2Connect an iPod to the USB cable using an iPod Dock Connector.

A song will be played automatically.

Selecting a song (chapter) 1 Press c or d.

Selecting an album 1 Press 1/ or 2/.

!The album may not be selected correctly if the iPod has more than one album with the same title on it. Select the album you want to listen to using list search. For details, refer to Browsing for a song on this page.

Fast forwarding or reversing 1 Press and hold c or d.

Notes

!The iPod cannot be turned on or off when the control mode is set to CTRL AUDIO.

!Disconnect headphones from the iPod before connecting it to this unit.

!The iPod will turn off about two minutes after the ignition switch is set to OFF.

Displaying text information

Selecting the desired text information 1 Press .

Browsing for a song

1Press to switch to the top menu of list search.

2Use M.C. to select a category/song.

Changing the name of the song or category

1Turn M.C. Playlists—artists—albums—songs—podcasts

—genres—composers—audiobooks

Playing

1 When a song is selected, press M.C.

Viewing a list of songs in the selected category 1 When a category is selected, press M.C.

Playing a song in the selected category

1When a category is selected, press and hold

M.C.

Searching the list by alphabet

1When a list for the selected category is displayed, press to switch to alphabet search mode.

!You also can switch to alphabet search mode by turning M.C. twice.

2Turn M.C. to select a letter.

3Press M.C. to display the alphabetical list.

!To cancel searching, press .

Operating this unit

Notes

!You can play playlists created with the PC application (MusicSphere). The application will be available on our website.

!Playlists that you created with the PC application (MusicSphere) are displayed in abbreviated form.

Advanced operations using special buttons

Selecting a repeat play range

1Press 6/ to cycle between the following:

!OFF – Repeat off

!ONE – Repeat the current song

!ALL – Repeat all songs in the selected list ! You cannot select OFF when CTRL AUDIO is

selected. Refer to Operating this unit’s iPod function from your iPod on this page.

Playing all songs in random order (shuffle all) 1 Press 5/ to turn shuffle all on.

!When the control mode is set to CTRL iPod/ CTRL APP, shuffle play is on.

Pausing playback

1 Press 4/PAUSE to pause or resume.

Enhancing compressed audio and restoring rich sound (sound retriever)

1Press 3/S.Rtrv to cycle between:

1—2—OFF (off)

1 is effective for low compression rates, and 2 is effective for high compression rates.

Playing songs related to the currently playing song

You can play songs from the following lists.

Album list of the currently playing artist

Song list of the currently playing album

Album list of the currently playing genre

1Press and hold M.C. to switch to link play mode.

2Turn M.C. to change the mode; press to select.

!ARTIST – Plays an album of the artist currently being played.

!ALBUM – Plays a song from the album currently being played.

!GENRE – Plays an album from the genre cur-

rently being played.

The selected song/album will be played after the currently playing song.

Notes

!The selected song/album may be canceled if you operate functions other than link search (e.g. fast forward and reverse).

!Depending on the song selected to play, the end of the currently playing song and the beginning of the selected song/album may be cut off.

Operating this unit’s iPod function from your iPod

You can listen to the sound from your iPod applications using your car’s speakers, when

CTRL APP is selected.

!This function is not compatible with iPod nano 1st generation.

APP Mode is compatible with the following iPod models.

!iPhone 4 (software version 4.1 or later)

!iPhone 3GS (software version 3.0 or later)

!iPhone 3G (software version 3.0 or later)

!iPhone (software version 3.0 or later)

!iPod touch 4th generation (software version

4.1or later)

!iPod touch 3rd generation (software version

3.0or later)

!iPod touch 2nd generation (software version

3.0or later)

En

Section

02

English

7

Section

 

 

 

02

 

Operating this unit

 

 

 

! iPod touch 1st generation (software version

 

 

 

 

 

 

REPEAT (repeat play)

 

 

3.0 or later)

%

1 Press M.C. to select a repeat play range.

Press BAND/ to switch the control

For details, refer to Selecting a repeat play range

 

mode.

 

on the previous page.

 

 

! CTRL iPod – This unit’s iPod function can be

 

 

 

 

 

 

SHUFFLE (shuffle)

 

 

operated from the connected iPod.

 

 

! CTRL APP – Play back the sound from your

1 Press M.C. to select your favorite setting.

 

 

iPod applications.

 

 

! CTRL AUDIO – This unit’s iPod function can

! SNG – Play back songs in the selected list

 

 

be operated from this unit.

in random order.

 

Notes

! ALB – Play back songs from a randomly se-

 

lected album in order.

!

Switching the control mode to CTRL iPod/

! OFF – Cancel random play.

CTRL APP pauses song playback. Operate

SHUFFLE ALL (shuffle all)

the iPod to resume playback.

! The following functions are still accessible from the unit even if the control mode is set

1 Press M.C. to turn shuffle all on.

to CTRL iPod/CTRL APP.

To turn off, set SHUFFLE in the FUNCTION menu to off.

— Pausing

Fast forward/reverse

Selecting a song (chapter)

!When the control mode is set to CTRL iPod, operations are limited as follows:

The function settings are not available.

The browse function cannot be operated from this unit.

Function settings

LINK PLAY (link play)

1Press M.C. to display the setting mode.

2Turn M.C. to change the mode; press to select. For details about the settings, refer to Playing songs related to the currently playing song on the previous page.

PAUSE (pause)

1Press M.C. to display the main menu.

2Turn M.C. to change the menu option and press to select FUNCTION.

3Turn M.C. to select the function.

After selecting, perform the following procedures to set the function.

!When the control mode is set to CTRL iPod/

CTRL APP, only PAUSE or S.RTRV is available.

1 Press M.C. to pause or resume.

AUDIO BOOK (audiobook speed)

1Press M.C. to display the setting mode.

2Turn M.C. to select your favorite setting.

!FASTER – Playback at a speed faster than normal

!NORMAL – Playback at normal speed

!SLOWER – Playback at a speed slower than normal

3Press M.C. to confirm the selection.

8 En

Operating this unit

S.RTRV (sound retriever)

Automatically enhances compressed audio and restores rich sound.

1Press M.C. to select the desired setting. For details, refer to Enhancing compressed

audio and restoring rich sound (sound retriever) on the previous page.

Audio adjustments

1Press M.C. to display the main menu.

2Turn M.C. to change the menu option and press to select AUDIO.

3Turn M.C. to select the audio function.

After selecting, perform the following procedures to set the audio function.

FAD/BAL (fader/balance adjustment)

1Press M.C. to display the setting mode.

2Press M.C. to cycle between fader (front/rear) and balance (left/right).

3Turn M.C. to adjust speaker balance.

!When the rear output and RCA output setting are SW, you cannot adjust front/rear speaker balance. Refer to REAR-SP (rear output setting) on the next page. Refer to PREOUT (preout setting) on the next page.

PRESET EQ (equalizer recall)

1Press M.C. to display the setting mode.

2Turn M.C. to select the equalizer.

DYNAMIC—VOCAL—NATURAL—CUSTOM

—FLAT—POWERFUL

3Press M.C. to confirm the selection.

!You can also switch the equalizer by pressing

repeatedly (DEH-2400UB and DEH-24UB).

TONE CTRL (equalizer adjustment)

! Adjusted equalizer curve settings are stored in

CUSTOM.

1Press M.C. to display the setting mode.

2Press M.C. to select BASS (bass)/MID (mid)/ TREBLE (treble).

3Turn M.C. to adjust the level. Adjustment range: +6 to –6

LOUD (loudness)

Loudness compensates for deficiencies in the lowfrequency and high-frequency ranges at low volume.

1Press M.C. to select the desired setting. OFF (off)—LOW(low)—HI (high)

SUB.W (subwoofer on/off setting)

This unit is equipped with a subwoofer output which can be turned on or off.

! This function is not available for DEH-2400UB and DEH-24UB.

1Press M.C. to select the desired setting. NOR (normal phase)—REV (reverse phase)— OFF (subwoofer off)

SUB.W CTRL (subwoofer adjustment)

Operating this unit

The cut-off frequency and output level can be adjusted when the subwoofer output is on.

Only frequencies lower than those in the selected range are outputted from the subwoofer.

!This function is not available for DEH-2400UB and DEH-24UB.

!When you select OFF in SUB.W, you cannot select this function. For details, refer to SUB.W

(subwoofer on/off setting) on the previous page.

1Press M.C. to display the setting mode.

2Press M.C. to cycle between the cut-off frequency and output level of the subwoofer. Cut-off frequency (Cut-off frequency display flashes.)—Output level (Output level display flashes.)

3Turn M.C. to select the desired setting. Cut-off frequency: 50HZ—63HZ—80HZ— 100HZ—125HZ

Output level: –24 to +6

SLA (source level adjustment)

SLA (Source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources.

!Settings are based on the FM volume level, which remains unchanged.

!The AM volume level can also be adjusted with this function.

!When selecting FM as the source, you cannot

switch to SLA.

1Press M.C. to display the setting mode.

2Turn M.C. to adjust the source volume. Adjustment range: +4 to –4

3Press M.C. to confirm the selection.

2Press M.C. and hold until function name appears in the display.

3Turn M.C. to select the initial setting.

After selecting, perform the following procedures to set the initial setting.

CLOCK SET (setting the clock)

1Press M.C. to display the setting mode.

2Press M.C. to select the segment of the clock display you wish to set.

Hour—Minute

3Turn M.C. to adjust the clock.

AUX (auxiliary input)

Activate this setting when using an auxiliary device connected to this unit.

1 Press M.C. to turn AUX on or off.

USB PNP (plug and play)

This setting allows you to switch your source to USB/iPod automatically.

1Press M.C. to turn the plug and play function on or off.

ON – When a USB storage device/iPod is connected, depending on the type of device, the source is automatically switched to USB/iPod when you turn on the engine. If you disconnect your USB storage device/iPod, this unit’s source is turned off.

OFF – When a USB storage device/iPod is connected, the source is not switched to USB/ iPod automatically. Please change the source to USB/iPod manually.

REAR-SP (rear output setting)

Initial settings

1 Press and hold SRC/OFF until the unit turns off.

Operating this unit

The rear speaker leads output can be used for fullrange speaker or subwoofer connection.

If you switch to SW, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp.

Initially, REAR-SP is set for rear full-range speaker connection (FUL).

1Press M.C. to select the desired setting.

FUL—SW

!Even if you change this setting, there will be no output if you select OFF in SUB.W

(Refer to SUB.W (subwoofer on/off setting) on the previous page).

!If you change this setting, subwoofer output in the audio menu will return to the factory settings.

PREOUT (preout setting)

The RCA outputs can be used for rear speaker or subwoofer connection.

If you switch to SW, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp.

Initially, PREOUT is set for rear full-range speaker connection (SW).

1Press M.C. to select the desired setting.

SW—REA

!Even if you change this setting, there will be no output if you select OFF in SUB.W

(Refer to SUB.W (subwoofer on/off setting) on the previous page).

!If you change this setting, subwoofer output in the audio menu will return to the factory settings.

DEMO (demo display setting)

1 Press M.C. to turn the demo display on or off.

SCROLL (scroll mode setting)

When ever scroll is set to ON, recorded text information scrolls continuously in the display. Set to OFF if you prefer the information to scroll just once.

1 Press M.C. to turn the ever scroll on or off.

Selecting the illumination color

Only for DEH-3400UB and DEH-34UB.

This unit is equipped with multiple-color illumination. You can select desired colors for the keys and display of this unit. You also can customize the colors you want to use.

Selecting the key color from the illumination color list

Only for DEH-3400UB and DEH-34UB.

You can select desired colors for the keys of this unit.

1Press .

2Turn M.C. to display KEY COLOR and press to select.

3Turn M.C. to select the illumination color.

You can select one option from the following list.

!30 preset colors (WHITE to ROSE)

!SCAN (cycle through all colors)

!3 sets of colors (WARM, AMBIENT, CALM)

!CUSTOM (customized illumination color)

4Press M.C. to confirm the selection.

Notes

!When SCAN is selected, the system automatically cycles through the 30 preset colors.

!When WARM is selected, the system automatically cycles through the warm colors.

Section

02

English

En 9

Section

 

 

 

 

 

 

02

 

Operating this unit

 

 

 

 

! When AMBIENT is selected, the system au-

2 Turn M.C. to display BOTH COLOR and

 

 

 

 

tomatically cycles through the ambient col-

press to select.

 

 

ors.

 

 

 

 

 

! When CALM is selected, the system auto-

3 Turn M.C. to select the illumination color.

 

 

matically cycles through the calm colors.

You can select one option from the following list.

 

! When CUSTOM is selected, the customized

! 30 preset colors (WHITE to ROSE)

 

 

color saved is selected.

! SCAN (cycle through all colors)

 

! To cancel selecting the illumination color,

 

 

 

 

 

press

.

4 Press M.C. to confirm the selection.

 

Selecting the display color from

Notes

 

 

 

! You cannot select 3 sets of preset colors and

 

the illumination color list

 

CUSTOM in this function.

 

Only for DEH-3400UB and DEH-34UB.

 

! Once you select a color in this function, col-

 

You can select the desired colors for the display

ors on the keys and display of this unit auto-

 

of this unit.

 

matically switch to the color you selected.

1

Press

.

! For details about colors on the list, refer to

Selecting the key color from the illumination

 

2 Turn M.C. to display DISP COLOR and

color list on the previous page.

 

 

 

 

 

press to select.

Customizing the illumination color

 

3 Turn M.C. to select the illumination color.

Only for DEH-3400UB and DEH-34UB.

 

 

 

 

 

You can select one option from the following list.

1 Press

.

 

 

 

! 30 preset colors (WHITE to ROSE)

 

 

 

 

 

 

 

 

!

SCAN (cycle through all colors)

2 Turn M.C. to display KEY COLOR or

 

 

!

3 sets of colors (WARM, AMBIENT, CALM)

 

 

DISP COLOR. Press to select.

 

 

!

CUSTOM (customized illumination color)

 

 

 

 

 

 

4 Press M.C. to confirm the selection.

3 Press M.C. and hold until the customizing

 

illumination color setting appears in the dis-

 

 

 

 

 

 

Note

 

 

play.

 

 

 

For details about colors on the list, refer to Se-

4 Press M.C. to select the primary color.

 

lecting the key color from the illumination color

 

list on the previous page.

R (red)—G (green)—B (blue)

 

Selecting key and display color

5 Turn M.C. to adjust the brightness level.

 

from the illumination color list

Adjustment range: 0 to 60

 

# You cannot select a level below 10 for all three of

 

Only for DEH-3400UB and DEH-34UB.

 

R (red), G (green), and B (blue) at the same time.

 

You can select the desired colors for the keys

 

# You can also perform the same operation on

 

and display of this unit.

 

other colors.

 

 

 

 

 

 

 

 

 

1

Press

.

 

 

 

Operating this unit

Notes

!You cannot create a custom illumination color when SCAN or a set of colors (WARM, AMBIENT, or CALM) is selected.

!You can create custom illumination colors for both KEY COLOR and DISP COLOR.

Switching the dimmer setting

You can adjust the brightness of illumination.

% Press and hold .

Using an AUX source

1Insert the stereo mini plug into the AUX input jack.

2Press SRC/OFF to select AUX as the source.

Note

AUX cannot be selected unless the auxiliary setting is turned on. For more details, refer to AUX (auxiliary input) on the previous page.

Turning the clock display on or off

% Pressto turn the clock display on or off.

# The clock display disappears temporarily when you perform other operations, but the clock display appears again after 25 seconds.

10 En

Installation

Connections

WARNING

!Use speakers over 50 W (output value) and between 4 W to 8 W (impedance value). Do not use 1 W to 3 W speakers for this unit.

!The black cable is ground. When installing this unit or power amp (sold separately), make sure to connect the ground wire first. Ensure that the ground wire is properly connected to metal parts of the car’s body. The ground wire of the power amp and the one of this unit or any other device must be connected to the car separately with different screws. If the screw for the ground wire loosens or falls out, it could result in fire, generation of smoke or malfunction.

Ground wire

POWER AMP

 

 

 

 

 

 

 

 

Other devices

Metal parts of car’s body

(Another electronic

 

device in the car)

 

Important

!When installing this unit in a vehicle without an ACC (accessory) position on the ignition switch, failure to connect the red cable to the terminal that detects operation of the ignition key may result in battery drain.

 

F

ON

 

F

 

 

 

O

 

S

 

 

 

T

 

 

TR

A

ACC position

No ACC position

!Use this unit with a 12-volt battery and negative grounding only. Failure to do so may result in a fire or malfunction.

!To prevent a short-circuit, overheating or malfunction, be sure to follow the directions below.

Disconnect the negative terminal of the battery before installation.

Secure the wiring with cable clamps or adhesive tape. Wrap adhesive tape around wiring that comes into contact with metal parts to protect the wiring.

Place all cables away from moving parts, such as the shift lever and seat rails.

Place all cables away from hot places, such as near the heater outlet.

Do not connect the yellow cable to the battery by passing it through the hole to the engine compartment.

Cover any disconnected cable connectors with insulating tape.

Do not shorten any cables.

Never cut the insulation of the power cable of this unit in order to share the power with other devices. The current capacity of the cable is limited.

Use a fuse of the rating prescribed.

Never wire the negative speaker cable directly to ground.

Never band together negative cables of multiple speakers.

!When this unit is on, control signals are sent through the blue/white cable. Connect this cable to the system remote control of an external power amp or the vehicle’s auto-anten- na relay control terminal (max. 300 mA

12 V DC). If the vehicle is equipped with a glass antenna, connect it to the antenna booster power supply terminal.

!Never connect the blue/white cable to the power terminal of an external power amp. Also, never connect it to the power terminal of the auto antenna. Doing so may result in battery drain or a malfunction.

Installation

This unit

DEH-3400UB and DEH-34UB

12 3

4

5

6

DEH-2400UB and DEH-24UB

12

45

1Power cord input

2Rear output or subwoofer output

3Front output

4Antenna input

5Fuse (10 A)

6Wired remote input

Hard-wired remote control adaptor can be connected (sold separately).

Power cord

Perform these connections when not connecting a rear speaker lead to a subwoofer.

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

L

 

 

 

 

 

 

 

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

3

4

 

 

 

 

6

 

 

 

8

 

 

F

 

 

 

 

 

7

 

 

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

a

 

 

 

c

 

 

R

 

 

 

 

 

b

 

 

 

d

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

e

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

f

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

g

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

h

 

 

 

 

 

 

 

 

 

 

 

 

 

Perform these connections when using a subwoofer without the optional amplifier.

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L

 

 

 

 

 

 

 

 

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

4

 

 

 

 

 

6

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

F

 

 

 

 

 

 

 

7

 

 

 

 

 

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

i

 

 

 

 

a

 

 

 

 

 

 

c

 

 

 

 

 

 

 

 

SW

 

 

 

 

 

 

 

b

 

 

 

 

 

 

d

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

e

 

j

c

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

f

 

 

 

 

 

a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

g

 

k

 

 

 

 

 

 

 

 

 

 

l

 

 

 

 

 

 

 

 

 

 

h

 

 

 

 

 

b

 

 

 

d

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1To power cord input

2Left

3Right

4Front speaker

5Rear speaker

6White

7White/black

8Gray

9Gray/black

aGreen

bGreen/black

cViolet

dViolet/black

eBlack (chassis ground)

Connect to a clean, paint-free metal location.

fYellow

Connect to the constant 12 V supply terminal.

gRed

Connect to terminal controlled by ignition switch (12 V DC).

hBlue/white

Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC).

iSubwoofer (4 Ω)

Section

03

English

En 11

Section

03 Installation

jWhen using a subwoofer of 70 W (2 Ω), be sure to connect the subwoofer to the violet and violet/black leads of this unit. Do not connect anything to the green and green/ black leads.

kNot used.

lSubwoofer (4 Ω)× 2

Notes

!With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers.

!Change the initial setting of this unit. Refer to REAR-SP (rear output setting) on page 9. Refer to PREOUT (preout setting) on page 9. The subwoofer output of this unit is monaural.

Power amp (sold separately)

Perform these connections when using the optional amplifier.

DEH-3400UB and DEH-34UB

13

 

2

 

 

 

4

 

5

 

5

 

 

 

 

 

3

1

2

 

 

6

 

 

 

7

 

7

 

 

 

DEH-2400UB and DEH-24UB

1

 

3

 

2

 

 

 

6

 

7

 

7

 

 

 

1 System remote control Connect to Blue/white cable.

2 Power amp (sold separately)

3 Connect with RCA cables (sold separately)

12 En

4To Front output

5Front speaker

6To Rear output or subwoofer output

7Rear speaker or subwoofer

Installation

Important

!Check all connections and systems before final installation.

!Do not use unauthorized parts as this may cause malfunctions.

!Consult your dealer if installation requires drilling of holes or other modifications to the vehicle.

!Do not install this unit where:

it may interfere with operation of the vehicle.

it may cause injury to a passenger as a result of a sudden stop.

!The semiconductor laser will be damaged if it overheats. Install this unit away from hot places such as near the heater outlet.

!Optimum performance is obtained when the unit is installed at an angle of less than 60°.

60°

DIN front/rear mount

This unit can be properly installed using either front-mount or rear-mount installation.

Use commercially available parts when installing.

Installation

DIN Front-mount

1 Insert the mounting sleeve into the dashboard.

For installation in shallow spaces, use the supplied mounting sleeve. If there is enough space, use the mounting sleeve that came with the vehicle.

2 Secure the mounting sleeve by using a screwdriver to bend the metal tabs (90°) into place.

1

2

1Dashboard

2Mounting sleeve

3 Install the unit as illustrated.

1

2

3

4

5

1Nut

2Firewall or metal support

3Metal strap

4Screw

5Screw (M4 × 8)

#Make sure that the unit is installed securely in place. An unstable installation may cause skipping or other malfunctions.

DIN Rear-mount

1 Determine the appropriate position where the holes on the bracket and the side of the unit match.

2 Tighten two screws on each side.

1

3

 

2

1Screw

2Mounting bracket

3Dashboard or console

!Use either truss (5 mm × 8 mm) or flush surface (5 mm × 9 mm) screws, depending on the bracket screw holes.

Removing the unit

1 Remove the trim ring.

1Trim ring

2Notched tab

!Releasing the front panel allows easier access to the trim ring.

!When reattaching the trim ring, point the side with the notched tab down.

Additional information

Installation

2Insert the supplied extraction keys into both sides of the unit until they click into place.

3Pull the unit out of the dashboard.

Removing and re-attaching the front panel

You can remove the front panel to protect your unit from theft.

Press the detach button and push the front panel upward and pull it toward you.

For details, refer to Removing the front panel to protect your unit from theft and Re-attaching the front panel on page 4.

Securing the front panel

The front panel can be secured with the supplied screw.

1

1 Screw

Section

03

Troubleshooting

 

 

 

 

 

 

 

 

 

 

 

Symptom

Cause

Action

 

English

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The unit is

You are using a

Move electrical

 

 

Symptom

Cause

Action

 

 

 

 

 

malfunction-

device, such as

devices that may

 

 

 

 

 

 

 

ing.

a cellular

be causing the in-

 

The display il-

Demo mode is

Turn off the demo

 

 

 

 

 

 

There is inter-

phone, that

terference away

 

 

lumination

on.

display setting.

 

 

 

 

 

 

ference.

transmits elec-

from the unit.

 

 

turns on and

 

 

 

 

 

 

 

 

 

 

 

tric waves near

 

 

 

off at random.

 

 

 

 

 

 

 

 

 

 

 

 

 

the unit.

 

 

 

The display

You did not per-

Perform operation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

automatically

form any opera-

again.

 

 

 

 

 

 

 

returns to the

tion within

 

 

 

Error messages

 

 

 

ordinary dis-

about 30 sec-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

play.

onds.

 

 

 

When you contact your dealer or your nearest

 

 

The repeat

Depending on

Select the repeat

 

 

Pioneer Service Center, be sure to note the error

 

 

 

 

message.

 

 

 

 

play range

the repeat play

play range again.

 

 

 

 

 

 

 

 

 

 

 

 

 

changes un-

range, the se-

 

 

 

 

 

 

 

 

expectedly.

lected range

 

 

 

Built-in CD Player

 

 

 

 

 

may change

 

 

 

 

 

 

 

 

 

 

 

 

 

Message

Cause

Action

 

 

 

 

 

 

 

 

 

 

 

when another

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

folder or track is

 

 

 

ERROR-07,

The disc is dirty.

Clean the disc.

 

 

 

 

being selected

 

11, 12, 17, 30

 

 

 

 

 

 

 

The disc is

Replace the disc.

 

 

 

 

or during fast

 

 

 

 

 

 

 

 

 

scratched.

 

 

 

 

 

forwarding/re-

 

 

 

 

 

 

 

 

 

versing.

 

 

 

ERROR-07,

There is an elec-

Turn the ignition

 

 

 

 

 

 

10, 11, 12,

trical or me-

switch OFF and

 

 

A subfolder is

Subfolders can-

Select another re-

 

 

15, 17, 30,

chanical error.

back ON, or

 

 

not played

not be played

peat play range.

 

 

 

 

A0

 

switch to a differ-

 

 

back.

when FLD (fold-

 

 

 

 

 

 

 

 

 

 

 

ent source, then

 

 

 

 

er repeat) is se-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

back to the CD

 

 

 

 

lected.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

player.

 

 

 

 

 

 

 

 

 

 

 

 

NO XXXX ap-

There is no emSwitch the display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ERROR-15

The inserted

Replace the disc.

 

 

pears when a

bedded text in-

or play another

 

 

 

 

 

 

 

disc is blank.

 

 

 

display is

formation.

track/file.

 

 

 

 

 

 

changed (NO

 

 

 

 

ERROR-23

Unsupported

Replace the disc.

 

 

TITLE, for ex-

 

 

 

 

 

CD format.

 

 

 

ample).

 

 

 

 

FRMT READ

Sometimes

Wait until the

 

 

 

 

 

 

 

 

 

there is a delay

message disap-

 

 

 

 

 

 

 

 

 

between the

pears and you

 

 

 

 

 

 

 

 

 

start of playback

hear sound.

 

 

 

 

 

 

 

 

 

and when you

 

 

 

start to hear any sound.

En 13

Appendix

Additional information

 

 

 

 

 

 

 

Message

Cause

Action

 

 

 

 

 

 

 

 

 

NO AUDIO

The inserted

Replace the disc.

 

 

 

disc does not

 

 

 

 

contain any

 

 

 

 

playable files.

 

 

 

SKIPPED

The inserted

Replace the disc.

 

 

 

disc contains

 

 

 

 

DRM protected

 

 

 

 

files.

 

 

 

PROTECT

All the files on

Replace the disc.

 

 

 

the inserted

 

 

 

 

disc are em-

 

 

 

 

bedded with

 

 

 

 

DRM.

 

 

 

USB storage device/iPod

 

 

 

 

 

 

 

 

Message

Cause

Action

 

 

 

 

 

 

 

 

 

NO DEVICE

When plug and

! Turn the plug

 

 

 

play is off, no

and play on.

 

 

 

USB storage de-

! Connect a com-

 

 

 

vice or iPod is

patible USB stor-

 

 

 

connected.

age device/iPod.

 

 

FRMT READ

Sometimes

Wait until the

 

 

 

there is a delay

message disap-

 

 

 

between the

pears and you

 

 

 

start of playback

hear sound.

 

 

 

and when you

 

 

 

 

start to hear any

 

 

 

 

sound.

 

 

 

NO AUDIO

There are no

Transfer the audio

 

 

 

songs.

files to the USB

 

 

 

 

storage device

 

 

 

 

and connect.

 

 

 

The connected

Follow the USB

 

 

 

USB storage de-

storage device in-

 

 

 

vice has secur-

structions to dis-

 

 

 

ity enabled.

able the security.

 

Message

Cause

Action

 

 

 

 

 

 

 

 

 

SKIPPED

The connected

Play an audio file

 

 

USB storage de-

not embedded

 

 

vice contains

with Windows

 

 

files embedded

Media DRM 9/10.

 

 

with Windows

 

 

 

Mediaä DRM 9/

 

 

 

10.

 

PROTECT

All the files in

Transfer audio

 

 

the USB storage

files not em-

 

 

device are em-

bedded with

 

 

bedded with

Windows Media

 

 

Windows Media

DRM 9/10 to the

 

 

DRM 9/10.

USB storage de-

 

 

 

vice and connect.

N/A USB

The USB device

! Connect a USB

 

 

connected to is

Mass Storage

 

 

not supported

Class compliant

 

 

by this unit.

device.

 

 

 

! Disconnect

 

 

 

your device and

 

 

 

replace it with a

 

 

 

compatible USB

 

 

 

storage device.

 

 

 

 

14 En

Additional information

 

Message

Cause

Action

 

Message

Cause

Action

 

 

 

 

 

 

 

 

 

 

CHECK USB

The USB con-

Check that the

 

ERROR-19

Communication

Perform one of

 

 

nector or USB

USB connector or

 

 

failed.

the following op-

 

 

cable has short-

USB cable is not

 

 

 

erations.

 

 

circuited.

caught in some-

 

 

 

–Turn the ignition

 

 

 

thing or dam-

 

 

 

switch OFF and

 

 

 

aged.

 

 

 

back ON.

 

 

The connected

Disconnect the

 

 

 

–Disconnect the

 

 

 

 

 

USB storage de-

 

 

USB storage de-

USB storage de-

 

 

 

 

 

 

 

 

vice.

 

 

vice consumes

vice and do not

 

 

 

 

 

 

 

 

–Change to a dif-

 

 

more than

use it. Turn the

 

 

 

 

 

 

 

 

ferent source.

 

 

500 mA (maxi-

ignition switch to

 

 

 

 

 

 

 

 

Then, return to

 

 

mum allowable

OFF, then to ACC

 

 

 

 

 

 

 

 

the USB source.

 

 

current).

or ON and then

 

 

 

 

 

 

 

 

 

 

 

 

connect only

 

 

iPod failure.

Disconnect the

 

 

 

compliant USB

 

 

 

cable from the

 

 

 

storage devices.

 

 

 

iPod. Once the

 

 

 

 

 

 

 

iPod’s main

 

 

The iPod oper-

Make sure the

 

 

 

 

 

 

 

 

menu is dis-

 

 

ates correctly

connection cable

 

 

 

 

 

 

 

 

played, reconnect

 

 

but does not

for the iPod has

 

 

 

 

 

 

 

 

the iPod and reset

 

 

charge.

not shorted out

 

 

 

 

 

 

 

 

it.

 

 

 

(e.g., not caught

 

 

 

 

 

 

 

 

 

 

 

 

 

in metal objects).

 

ERROR-23

USB storage de-

USB storage de-

 

 

 

After checking,

 

 

vice was not for-

vice should be for-

 

 

 

turn the ignition

 

 

matted with

matted with

 

 

 

switch OFF and

 

 

FAT12, FAT16 or

FAT12, FAT16 or

 

 

 

back ON, or dis-

 

 

FAT32.

FAT32.

 

 

 

connect the iPod

 

 

 

 

 

 

 

 

ERROR-16

The iPod firm-

Update the iPod

 

 

 

and reconnect.

 

 

 

 

 

 

ware version is

version.

 

 

 

 

 

 

 

 

 

 

 

 

old.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

iPod failure.

Disconnect the

 

 

 

 

 

 

 

cable from the

 

 

 

 

 

 

 

iPod. Once the

 

 

 

 

 

 

 

iPod’s main

 

 

 

 

 

 

 

menu is dis-

 

 

 

 

 

 

 

played, reconnect

 

 

 

 

 

 

 

the iPod and reset

 

 

 

 

 

 

 

it.

 

 

 

 

 

 

 

 

 

 

 

 

 

STOP

There are no

Select a list that

 

 

 

 

 

 

songs in the

contains songs.

 

 

 

 

 

 

current list.

 

 

 

 

 

 

 

 

 

Additional information

 

Message

Cause

Action

 

To clean a CD, wipe the disc with a soft cloth out-

 

 

 

ward from the center.

 

 

 

 

 

NOT FOUND No related

Transfer songs to

songs.

the iPod.

Handling guidelines

Discs and player

Use only discs that feature either of the following two logos.

Use 12-cm discs. Do not use 8-cm discs or an adapter for 8-cm discs.

Use only conventional, fully circular discs. Do not use shaped discs.

Condensation may temporarily impair the player’s performance. Let it rest for about one hour to adjust to a warmer temperature. Also, wipe any damp discs off with a soft cloth.

Playback of discs may not be possible because of disc characteristics, disc format, recorded application, playback environment, storage conditions, and so on.

Road shocks may interrupt disc playback.

When using discs that can be printed on label surfaces, check the instructions and the warnings of the discs. Depending on the discs, inserting and ejecting may not be possible. Using such discs may result in damage to this equipment.

Do not attach commercially available labels or other materials to the discs.

!The discs may warp making the disc unplayable.

!The labels may come off during playback and prevent ejection of the discs, which may result in damage to the equipment.

Do not insert anything other than a CD into the CD loading slot.

Do not use cracked, chipped, warped, or otherwise damaged discs as they may damage the player.

Unfinalized CD-R/RW discs cannot be played back.

Do not touch the recorded surface of the discs.

Store discs in their cases when not in use.

Do not attach labels, write on or apply chemicals to the surface of the discs.

USB storage device

Connections via USB hub are not supported.

Do not connect anything other than a USB storage device.

Additional information

Firmly secure the USB storage device when driving. Do not let the USB storage device fall onto the floor, where it may become jammed under the brake or accelerator pedal.

Depending on the USB storage device, the following problems may occur.

!Operations may vary.

!The storage device may not be recognized.

!Files may not be played back properly.

!The device may generate noise in the radio.

iPod

Do not leave the iPod in places with high temperatures.

To ensure proper operation, connect the dock connector cable from the iPod directly to this unit.

Firmly secure the iPod when driving. Do not let the iPod fall onto the floor, where it may become jammed under the brake or accelerator pedal.

About iPod settings

!When an iPod is connected, this unit changes the EQ (equalizer) setting of the iPod to off in order to optimize the acoustics. When you disconnect the iPod, the EQ returns to the original setting.

!You cannot set Repeat to off on the iPod when using this unit. Repeat is automatically changed to All when the iPod is connected to this unit.

Incompatible text saved on the iPod will not be displayed by the unit.

DualDiscs

DualDiscs are two-sided discs that have a recordable CD for audio on one side and a recordable DVD for video on the other.

Since the CD side of DualDiscs is not physically compatible with the general CD standard, it may not be possible to play the CD side with this unit. Frequent loading and ejecting of a DualDisc may result in scratches on the disc. Serious scratches can lead to playback problems on this unit. In some cases, a DualDisc may become stuck in the disc loading slot and will not eject. To prevent this, we recommend you refrain from using DualDisc with this unit.

Please refer to the information from the disc manufacturer for more detailed information about DualDiscs.

Compressed audio compatibility (disc, USB)

WMA

File extension: .wma

Bit rate: 48 kbps to 320 kbps (CBR), 48 kbps to 384 kbps (VBR)

Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz

Windows Media Audio Professional, Lossless, Voice/DRM Stream/Stream with video: Not compatible

MP3

File extension: .mp3

Bit rate: 8 kbps to 320 kbps (CBR), VBR

Sampling frequency: 8 kHz to 48 kHz (32 kHz, 44.1 kHz, 48 kHz for emphasis)

Appendix

English

En 15

Appendix

Additional information

Compatible ID3 tag version: 1.0, 1.1, 2.2, 2.3, 2.4 (ID3 tag Version 2.x is given priority over Version 1. x.)

M3u playlist: Not compatible

MP3i (MP3 interactive), mp3 PRO: Not compatible

Packet write data transfer: Not compatible

Regardless of the length of blank sections between the songs from the original recording, compressed audio discs play with a short pause between songs.

WAV

File extension: .wav

Quantization bits: 8 and 16 (LPCM), 4 (MS ADPCM)

Sampling frequency: 16 kHz to 48 kHz (LPCM), 22.05 kHz and 44.1 kHz (MS ADPCM)

Supplemental information

Only the first 32 characters can be displayed as a file name (including the file extension) or a folder name.

This unit may not operate correctly depending on the application used to encode WMA files.

There may be a slight delay at the start of playback of audio files embedded with image data or audio files stored on a USB storage device that has numerous folder hierarchies.

Disc

Playable folder hierarchy: up to eight tiers (A practical hierarchy is less than two tiers).

Playable folders: up to 99

Playable files: up to 999

File system: ISO 9660 Level 1 and 2, Romeo, Joliet

Multi-session playback: Compatible

USB storage device

Playable folder hierarchy: up to eight tiers (A practical hierarchy is less than two tiers).

Playable folders: up to 500

Playable files: up to 15 000

Playback of copyright-protected files: Not compatible

Partitioned USB storage device: Only the first partition can be played.

There may be a slight delay when starting playback of audio files on a USB storage device with numerous folder hierarchies.

CAUTION

Do not leave discs or a USB storage device in any place that is subject to high temperatures.

Additional information

iPod compatibility

 

About the file/format compatibility, refer to the

 

 

iPod manuals.

This unit supports only the following iPod models. Supported iPod software versions are shown below. Older versions may not be supported. Made for

!iPhone 4 (software version 4.1)

!iPhone 3GS (software version 3.0.1)

!iPhone 3G (software version 2.0)

!iPhone (software version 1.1.1)

!iPod nano 6th generation (software version 1.0)

!iPod nano 5th generation (software version 1.0.1)

!iPod nano 4th generation (software version 1.0)

!iPod nano 3rd generation (software version 1.0)

!iPod nano 2nd generation (software version 1.1.2)

!iPod nano 1st generation (software version 1.2.0)

!iPod touch 4th generation (software version 4.1)

!iPod touch 3rd generation (software version 3.1.1)

!iPod touch 2nd generation (software version 2.1.1)

!iPod touch 1st generation (software version 1.1)

!iPod classic 160GB (software version 2.0.2)

!iPod classic 120GB (software version 2.0)

!iPod classic (software version 1.0)

Audiobook, Podcast: Compatible

CAUTION

Pioneer accepts no responsibility for data lost on the iPod, even if that data is lost while this unit is used.

Sequence of audio files

The user cannot assign folder numbers and specify playback sequences with this unit.

Example of a hierarchy

01

02

 

 

03

04

05

Level 1 Level 2 Level 3 Level 4

: Folder

: Compressed audio file

01 to 05: Folder number

1 to 6: Playback sequence

Disc

Folder selection sequence or other operation may differ depending on the encoding or writing software.

Depending on the generation or version of the iPod, some functions may not be available.

Operations may vary depending on the software version of iPod.

When using an iPod, an iPod Dock Connector to USB Cable is required.

A Pioneer CD-IU50 interface cable is also available. For details, consult your dealer.

USB storage device

Playback sequence is the same as recorded sequence in the USB storage device.

To specify the playback sequence, the following method is recommended.

1Create a file name that includes numbers that specify the playback sequence (e.g., 001xxx.mp3 and 099yyy.mp3).

2Put those files into a folder.

16 En

Additional information

3 Save the folder containing files on the USB storage device.

However, depending on the system environment, you may not be able to specify the playback sequence.

For USB portable audio players, the sequence is different and depends on the player.

Copyright and trademark

iTunes

Apple and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries.

MP3

Supply of this product only conveys a license for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenue-generating) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/ streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-de- mand applications. An independent license for such use is required. For details, please visit http://www.mp3licensing.com.

WMA

Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from Microsoft Licensing, Inc.

iPod & iPhone

iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.

Specifications

Usable discs

Compact disc

 

 

 

 

Signal-to-noise ratio .........

94 dB (1 kHz) (IHF-A network)

General

 

Number of channels ........

2 (stereo)

 

MP3 decoding format

MPEG-1 & 2 Audio Layer 3

Power source

14.4 V DC (10.8 V to 15.1 V al-

WMA decoding format

Ver. 7, 7.1, 8, 9, 10, 11, 12 (2 ch

 

lowable)

 

 

audio)

Grounding system

Negative type

 

 

(Windows Media Player)

Maximum current consumption

 

WAV signal format

Linear PCM & MS ADPCM

 

10.0 A

...................................

 

 

Additional information

 

 

(Non-compressed)

Dimensions (W × H × D): DIN

Chassis

.............. 178 mm × 50 mm ×

 

165 mm

 

(7 in. × 2 in. × 6-1/2 in.)

Nose ..................

188 mm × 58 mm ×

 

16 mm

D

(7 - 3/8 in.× 2-1/4 in.× 5/8 in.)

 

Chassis ..............

178 mm × 50 mm ×

 

165 mm

 

(7 in.× 2 in.× 6-1/2 in.)

Nose ..................

170 mm × 46 mm ×

 

16 mm

 

(6 - 3/4 in.× 1-3/4 in.× 5/8 in.)

Weight .............................

1.1 kg (2.4 lbs)

Audio

Maximum power output ...

50 W × 4

Continuous power output

70 W × 1/2 W (for subwoofer)

22 W × 4 (50 Hz to 15 000 Hz,

...................................

 

5 % THD, 4 W load, both chan-

 

nels driven)

Load impedance ..............

4 W (4 W to 8 W allowable)

Preout maximum output level

Tone...................................controls:

2.0 V

 

Bass

 

Frequency ..........

100 Hz

Gain ..................

±12 dB

Mid

 

Frequency ..........

1 kHz

Gain ..................

±12 dB

Treble

 

Frequency ..........

10 kHz

Gain ..................

±12 dB

Subwoofer (mono):

 

Frequency .................

50 Hz/63 Hz/80 Hz/100 Hz/

 

125 Hz

Slope ........................

–18 dB/oct

Gain .........................

+6 dB to –24 dB

Phase .......................

Normal/Reverse

CD player

System ............................ Compact disc audio system

USB

USB standard specification

USB 2.0 full speed

Maximum...................................current supply

1 A

...................................

USB Class .......................

MSC (Mass Storage Class)

File system .......................

FAT12, FAT16, FAT32

MP3 decoding format ......

MPEG-1 & 2 Audio Layer 3

WMA decoding format .....

Ver. 7, 7.1, 8, 9, 10, 11, 12 (2 ch

 

audio)

 

(Windows Media Player)

WAV signal format ...........

Linear PCM & MS ADPCM

 

(Non-compressed)

FM tuner

Frequency range ..............

87.9 MHz to 107.9 MHz

Usable sensitivity .............

9 dBf (0.8 µV/75 W, mono, S/N:

 

30 dB)

Signal-to-noise ratio .........

72 dB (IHF-A network)

AM tuner

Frequency range ..............

530 kHz to 1 710 kHz

Usable sensitivity .............

25 µV (S/N: 20 dB)

Signal-to-noise ratio .........

62 dB (IHF-A network)

CEA2006 Specifications

Power output ...................

14 W RMS × 4 Channels (4 W

 

and 1 % THD+N)

S/N ratio ..........................

91 dBA (reference: 1 W into

 

4 W)

Note

Specifications and the design are subject to modifications without notice.

Appendix

English

En 17

Loading...
+ 39 hidden pages