Pioneer AVIC-5200NEX, AVIC-6200NEX, AVIC-7200NEX, AVIC-8200NEX Installation Manual

0 (0)

Installation Manual

Manuel dinstallation

MULTIMEDIA NAVIGATION RECEIVER

RÉCEPTEUR DE NAVIGATION MULTIMÉDIA

AVIC-8200NEX AVIC-7200NEX AVIC-6200NEX AVIC-5200NEX

Français English

Contents

Precautions

 

 

 

Your new product and this manual

3

Important safeguards

3

 

 

Connection

 

 

 

Precautions before connecting the

 

system 5

 

 

 

Before installing this product

5

 

To prevent damage 6

 

 

 

– Notice for the blue/white lead

6

Parts supplied 7

 

 

 

Connecting the power cord (1)

8

 

Connecting the power cord (2)

10

 

Connecting the system

12

 

 

Connecting to separately sold power amp 14

Connecting an iPod / iPhone or an Android device 15

Connecting an iPhone with Lightning

connector

16

Connecting via the USB port

 

(iPhone)

16

Connecting via the HDMI port

 

(iPhone)

16

Connecting via the RGB input (iPhone) 17

Connecting an iPhone with 30-pin connector 17

– Connecting via the AUX input (iPhone) 18

Connecting via the RGB input (iPhone) 18

Connecting the Android™ device 19

Connecting via the HDMI port (Android

 

device)

19

Connecting via the MHL port (Android

 

device)

19

Connecting via the USB port (Android device) 20

Securing the High Speed HDMI® Cable

20

Connecting a rear view camera

21

 

Connecting the external video

 

 

 

component 22

 

 

 

 

Using AV input

22

 

 

 

Using an AUX input 23

 

 

Connecting an HDMI device

24

 

 

Connecting the rear display

24

 

 

When using a rear display connected to

 

rear video output

24

 

 

 

Installation

 

 

 

 

Precautions before installation

25

 

To avoid electromagnetic interference

25

Before installing 25

– For AVIC-8200NEX and AVIC-7200NEX

 

users 26

 

 

Installing this product

26

 

Installation notes

26

 

Parts supplied 27

 

Installation using the screw holes on

 

the side of this product

27

Fastening the detachable faceplate 28

Installing the GPS antenna

29

Installation notes

29

 

When installing the antenna inside the vehicle (on the dashboard or rear

 

shelf) 30

 

Installing the microphone

31

Parts supplied 31

 

Mounting on the sun visor 31

Installation on the steering column 32

Adjusting the microphone angle 32

After installation

 

After installing this product

33

2 En

Precautions

Your new product and this

Important safeguards

manual

 

WARNING

! The navigation features of this product

Pioneer does not recommend that you install

(and the rear view camera option if pur-

this product yourself. This product is de-

chased) are intended solely to aid you in

signed for professional installation only. We

the operation of your vehicle. It is not a sub-

recommend that only authorized Pioneer ser-

stitute for your attentiveness, judgment

vice personnel, who have special training

and care when driving.

 

and experience in mobile electronics, set up

! Never use this product to route to hospi-

and install this product. NEVER SERVICE

tals, police stations, or similar facilities in

THIS PRODUCT YOURSELF. Installing or

an emergency. Please call the appropriate

servicing this product and its connecting

emergency number.

 

cables may expose you to the risk of electric

! Do not operate this product, any applica-

shock or other hazards, and can cause da-

tions, or the rear view camera option (if pur-

mage to this product that is not covered by

chased) if doing so will divert your attention

warranty.

in any way from the safe operation of your

 

vehicle. Always observe safe driving rules

! Read this manual fully and carefully before

and follow all existing traffic regulations. If

installing this product.

you experience difficulty in operating this

! Keep this manual handy for future refer-

product or reading the display, park your

ence.

vehicle in a safe location and apply the

! Pay close attention to all warnings in this

parking brake before making the necessary

manual and follow the instructions care-

adjustments.

 

 

fully.

! This manual explains how to install this

! This product may in certain circumstances

product in your vehicle. Operation of this

display inaccurate position of your vehicle,

product is explained in the separate man-

the distance of objects shown on the

uals.

 

 

screen, and compass directions. In addi-

! Do not install this product where it may (i)

tion, the system has certain limitations, in-

obstruct the driver’s vision, (ii) impair the

cluding the inability to identify one-way

performance of any of the vehicle’s operat-

streets, temporary traffic restrictions and

ing systems of safety features, including

potentially unsafe driving areas. Please ex-

airbags, hazard lamp buttons, or (iii) impair

ercise your own judgment in the light of ac-

the driver’s ability to safely operate the vehi-

tual driving conditions.

cle. In some cases, it may not be possible

! As with any accessory in your vehicle’s in-

to install this product because of the vehi-

cle type or the shape of the vehicle interior.

terior, this product should not divert your

! Model icons shown in this manual indicate

attention from the safe operation of your

that the description is intended for the

vehicle as it may result in serious injury or

models indicated by the icons.

 

death. If you experience difficulty in operat-

If the following icon is shown, the descrip-

ing the system or reading the display,

tion is applied only to the model shown.

please make adjustments while safely

e.g.)

 

parked.

8200NEX

 

! Please remember to wear your seat belt at

 

all times while operating your vehicle. If

 

 

 

 

 

 

 

 

! The graphical symbol

 

 

placed on

you are in an accident, your injuries can be

 

 

 

 

 

the product means direct current.

considerably more severe if your seat belt

 

 

 

 

 

 

 

 

is not properly buckled.

Section

01

English

En 3

Section

01 Precautions

!Certain country and government laws may prohibit or restrict the placement and use of this product in your vehicle. Please comply with all applicable laws and regulations

regarding the use, installation and operation of this product.

4 En

Connection

Precautions before

damaged, resulting in a short circuit or

connecting the system

malfunction and permanent damage to

the product.

 

WARNING

! Do not cut the GPS antenna cable to

shorten it or use an extension to make it

Do not take any steps to tamper with or dis-

longer. Altering the antenna cable could

able the parking brake interlock system

result in a short circuit or malfunction.

which is in place for your protection. Tamper-

! Do not shorten any leads. If you do, the

ing with or disabling the parking brake inter-

protection circuit (fuse holder, fuse resis-

lock system could result in serious injury or

tor or filter, etc.) may fail to work properly.

death.

! Never feed power to other electronic pro-

 

CAUTION

ducts by cutting the insulation of the

power supply lead of this product and tap-

! If you decide to perform the installation

ping into the lead. The current capacity of

yourself, and have special training and ex-

the lead will be exceeded, causing over-

perience in the mobile electronics instal-

heating.

lations, please carefully follow all of the

 

steps in the installation manual.

 

! Secure all wiring with cable clamps or

Before installing this product

electrical tape. Do not allow any bare wir-

! Use this product with a 12-volt battery and

ing to remain exposed.

! Do not directly connect the yellow lead of

negative grounding only. Failure to do so

this product to the vehicle battery. If the

may result in a fire or malfunction.

lead is directly connected to the battery,

! To avoid shorts in the electrical system, be

engine vibration may eventually cause

sure to disconnect the (–) battery cable be-

the insulation to fail at the point where

fore installation.

the wire passes from the passenger com-

 

partment into the engine compartment. If

 

the yellow lead’s insulation tears as a re-

 

sult of contact with metal parts, short-cir-

 

cuiting can occur, resulting in

 

considerable danger.

 

!It is extremely dangerous to allow cables to become wound around the steering column or shift lever. Be sure to install this product, its cables, and wiring away in such so that they will not obstruct or hinder driving.

!Make sure that the cables and wires will not interfere with or become caught in any of the vehicle’s moving parts, especially the steering wheel, shift lever, parking brake, sliding seat tracks, doors, or any of the vehicle’s controls.

!Do not route wires where they will be exposed to high temperatures. If the insulation heats up, wires may become

Section

02

English

En 5

Section

02 Connection

To prevent damage

WARNING

!Use speakers over 50 W (maximum input power) and between 4 W to 8 W (impedance value). Do not use 1 W to 3 W speak-

ers for this product.

!The black cable is ground. When installing this product or power amp (sold separately), make sure to connect the ground wire first. Ensure that the ground wire is properly connected to metal parts of the car’s body. The ground wire of the power amp and the one of this product or any other device must be connected to the car separately with different screws. If the screw for the ground wire loosens or falls out, it could result in fire generation of smoke or malfunction.

Ground wire

Power amp

 

 

 

 

 

 

Other devices

Metal parts of car’s body

(Another electronic

 

device in the car)

 

*1Not supplied for this unit.

!When replacing the fuse, be sure to only use a fuse of the rating prescribed on this product.

!When disconnecting a connector, pull the connector itself. Do not pull the lead, as you may pull it out of the connector.

!This product cannot be installed in a vehicle without ACC (accessory) position on the ignition switch.

 

CC

 

 

 

F

A

O

F

O

 

N

N

F

 

 

F

 

O

 

S

O

S

 

 

 

 

 

T

 

T

 

 

A

 

A

 

 

T

 

T

ACC position

No ACC position

6 En

!To avoid short-circuiting, cover the disconnected lead with insulating tape. It is especially important to insulate all unused speaker leads, which if left uncovered may cause a short circuit.

!Attach the connectors of the same color to the corresponding colored port, i.e., blue connector to the blue port, black to black, etc.

!Refer to the owner’s manual for details on connecting the power amp and other units, then make connections accordingly.

!Since a unique BPTL circuit is employed, do not directly ground the * side of the speaker lead or connect the * side of another side of the speaker lead together. Be sure to connect the * side of the speaker lead to the * side of the speaker lead on this product.

Notice for the blue/white lead

Important

When this product is in “Power OFF” mode, the control signal is also turned off. If “Power OFF” mode is canceled, the control signal is output again and the antenna is extended with the auto antenna function (if the antenna is being used). Be careful so that the extended antenna does not come into contact with any obstacles.

!When the ignition switch is turned on (ACC ON), a control signal is output through the blue/white lead. Connect to an external power amp’s system remote control terminal, the auto-antenna relay control terminal, or the antenna booster power control terminal (max. 300 mA 12 V DC). The control signal is output through the blue/white lead, even if the audio source is switched off.

!Be sure not to use this lead as the power supply lead for the external power amps. Such connection could cause excessive current drain and malfunction.

Connection

! Be sure not to use this lead as the power

Parts supplied

supply lead for the auto-antenna or anten-

Parts marked (*) are supplied with AVIC-

na booster. Such connection could cause

8200NEX, AVIC-7200NEX and AVIC-6200NEX.

excessive current drain and malfunction.

 

Section

02

English

This product

Power cord

GPS antenna

Microphone

Mini-jack extension

USB cable

cable

 

Lock tie*

Metal sheet

Clamp (3 pcs.)

Double-sided tape

En 7

Section

02 Connection

Connecting the power cord (1)

Yellow

To terminal supplied with power regardless of ignition switch position.

Red

To electric terminal controlled by ignition switch (12 V DC) ON/OFF.

Orange/white

To lighting switch terminal.

Black (ground)

To vehicle (metal) body.

White

Front speaker

White/black

Left

Green

Rear speaker

Green/black

With a two-speaker system, do not connect anything to the speaker leads that are not connected to speakers.

Gray

Front speaker

Gray/black

Right

Violet

Rear speaker

Violet/black

8 En

Connection

This product

14 cm (5-1/2 in.)

Yellow/black (MUTE)

If you use equipment with a mute function, connect that equipment to the Audio Mute lead. If not, keep the

Power supply Audio Mute lead free of any connections.

Power cord

Fuse (10 A)

Note

Audio source will be set to mute or attenuate, while the following sounds will not be muted or attenuated. For details, refer to Operation Manual.

— Voice guidance of the navigation

— Incoming ring tone and incoming voice of the cellular phone that is connected to this product via Bluetooth wireless technology

Blue/white (SYSTEM REMOTE CONTROL)

To auto-antenna relay control terminal or antenna booster power control terminal (max. 300 mA 12 V DC). If the vehicle has a glass antenna, connect to the antenna booster power control terminal (max. 300 mA 12 V DC).

Section

02

English

En 9

Section

02 Connection

Connecting the power cord (2)

Pink (CAR SPEED SIGNAL INPUT)

This product is connected here to detect the distance the vehicle travels. Always connect the vehicle’s speed detection circuit. Failure to make this connection will increase errors in the vehicle’s location display.

WARNING

IMPROPER CONNECTION MAY RESULT IN SERIOUS DAMAGE OR INJURY INCLUDING ELECTRICAL SHOCK, AND INTERFERENCE WITH THE OPERATION OF THE VEHICLE´S ANTILOCK BRAKING SYSTEM, AUTOMATIC TRANSMISSION AND SPEEDOMETER INDICATION.

CAUTION

It is strongly suggested that the speed pulse wire be connected for accuracy of navigation and better performance.

Note

The position of the speed detection circuit and the position of the parking brake switch vary depending on the vehicle model. For details, consult your authorized Pioneer dealer or an installation professional.

Light green (PARKING BRAKE)

Used to detect the ON/OFF status of the parking brake. This lead must be connected to the power supply side of the parking brake switch.

If this connection is made incorrectly or omitted, certain functions of this product will be unusable.

WARNING

LIGHT GREEN LEAD AT POWER CONNECTOR IS

DESIGNED TO DETECT PARKED STATUS AND

MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.

Power supply side

Ground side

Parking brake switch

10 En

Connection

This product

Power supply

Power cord

Violet/white (REVERSE-GEAR SIGNAL INPUT)

This is connected so that this product can detect whether the vehicle is moving forwards or backwards. Connect the violet/white lead to the lead whose voltage changes when the shift lever is put in reverse. Unless connected, the sensor may not detect your vehicle traveling forward/backward properly, and thus the position of your vehicle detected by the sensor may be misaligned from the actual position.

Note

When you use a rear view camera, please make sure to connect this lead. Otherwise you cannot switch to the rear view camera picture.

Section

02

English

En 11

Section

02 Connection

Connecting the system

iDatalink adapter input Please refer to the instruction

manual for the iDatalink adapter (sold separately).*

This product

SiriusXM Connect Vehicle Tuner

 

Please refer to the instruction manual

 

for SiriusXM Connect Vehicle Tuner

 

(sold separately).

Antenna jack

3 m (9 ft. 10 in.)

Wired remote input

Please refer to the instruction manual for the Hard-wired remote control adapter (sold separately).

Vehicle antenna

GPS antenna

3.55 m (11 ft. 8 in.)

Microphone

WARNING

·To avoid the risk of accident and the potential violation of applicable laws, this product should never be used while the vehicle is being driven except for navigation purposes. And, also rear displays should not be in a location where it is a visible distraction to the driver.

·In some countries, the viewing of images on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply they must be obeyed and this product’s video source should not be used.

12 En

Connection

Note

* Before using and/or connecting the iDatalink Maestro adapter, you will need to first

flash the Maestro module with the appropriate vehicle and head unit firmware. You can find the device number that is required for the activation on the followings (refer to Operation Manual.):

!the label on the packaging of this product

!the label on this product

!the “Firmware Information” screen

Section

02

English

En 13

Pioneer AVIC-5200NEX, AVIC-6200NEX, AVIC-7200NEX, AVIC-8200NEX Installation Manual

Section

02 Connection

Connecting to separately sold power amp

Rear outputs (REAR OUTPUT)

15 cm (5-7/8 in.)

Front outputs (FRONT OUTPUT)

Power amp

(sold separately)

RCA cables (sold separately)

Power amp (sold separately)

Power amp (sold separately)

This product

White, Red (SWL, SWR)

Power supply

 

Power cord

Blue/white

To system control terminal of the power amp (max. 300 mA 12 V DC).

System remote control

 

 

 

 

 

 

 

 

 

 

 

 

 

Front speaker

 

Rear speaker

 

Subwoofer

Notes

·You can change the RCA output of the subwoofer depending on your subwoofer system. (Refer to Operation Manual.)

·The subwoofer output of this product is monaural.

14 En

Connection

Connecting an iPod / iPhone or an Android device

Find your device and the function you want to operate from the list below, and refer to the page for the connection. p Depending on the device, some functions may not be available.

iPhone (5, 5c, 5s, 6, 6 Plus)/iPod touch (5th generation)

iPod (audio)

Apple CarPlay

Refer to Connecting via the USB port (iPhone) on page 16.

Pandora AVICSYNC App

AppRadio Mode

8200NEX

7200NEX

6200NEX

Refer to Connecting via the HDMI port (iPhone) on page 16.

Pandora

 

 

 

5200NEX

 

 

AVICSYNC App

 

 

Refer to Connecting via the RGB input (iPhone) on page 17.

Section

02

English

iPhone 3GS/iPod touch (2nd, 3rd generation)/iPod classic (80GB, 160GB)/iPod nano (3rd, 4th, 5th, 6th generation)

iPod (audio)

iPod (video) Refer to Connecting via the AUX input (iPhone) on page 18.

Pandora

iPhone (4, 4s)/iPod touch (4th generation)

iPod (audio) iPod (video)

AppRadio Mode Refer to Connecting via the RGB input (iPhone) on page 18.

Pandora AVICSYNC App

iPod nano (7th generation)

iPod (audio)

 

Refer to Connecting via the USB port (iPhone) on page 16.

 

 

 

 

Android device

 

 

 

 

 

 

8200NEX

7200NEX

6200NEX

HDMI port

AppRadio Mode

 

 

Refer to Connecting via the HDMI port (Android device) on page 19.

 

 

 

Pandora

 

 

MHL port

 

 

Refer to Connecting via the MHL port (Android device) on page 19.

AVICSYNC App

 

 

 

 

 

 

 

8200NEX

7200NEX

 

 

Android Auto

 

 

Refer to Connecting via the USB port (Android device) on page 20.

Pandora AVICSYNC App

En 15

Section

02 Connection

Connecting an iPhone with

Connecting via the HDMI port

Lightning connector

(iPhone)

Notes

!For details on how to connect an external device using a separately sold cable, refer to the manual for the cable.

!For details concerning the connection, operations and compatibility of iPhone, refer to Operation Manual.

Connecting via the USB port (iPhone)

The USB interface cable for iPod / iPhone (CDIU52) (sold separately) is required for the connection.

pWhen using Apple CarPlay, connect the iPhone to USB port 1.

USB port 1

This product

8200NEX 7200NEX 6200NEX

The following cables are required for the connection.

!HDMI interface cable for iPod / iPhone (CD-IH202) (sold separately)

!USB interface cable for iPod / iPhone (CDIU52) (sold separately)

!Lightning Digital AV Adapter (Apple Inc. products) (sold separately)

USB port 1

This product

 

HDMI port

USB cable

 

1.5 m (4 ft. 11 in.)

iPhone with

 

Lightning connector

USB port 2

High Speed HDMI® Cable

 

(Type A - A)

 

(supplied with CD-IH202)

iPhone with

Lightning Digital AV Adapter

Lightning connector

(Apple Inc. products)

 

 

(sold separately)

USB cable

1.5 m (4 ft. 11 in.)

USB interface cable for iPod / iPhone (CD-IU52) (sold separately)

16 En

USB interface cable for iPod / iPhone (CD-IU52) (sold separately)

 

Section

Connection

02

Note

!When you connect the High Speed HDMI® Cable, use the lock tie to fix it securely.

=For details, refer to Securing the High Speed HDMI® Cable on page 20.

Connecting via the RGB input (iPhone)

5200NEX

The following cables are required for the connection.

!VGA/USB interface cable for iPod / iPhone (CD-IV202AV) (sold separately)

!USB interface cable for iPod / iPhone (CDIU52) (sold separately)

!Lightning to VGA Adapter (Apple Inc. products) (sold separately)

USB port 1

This product

English

 

 

RGB input

 

 

iPhone with

 

 

Lightning connector

 

VGA/USB interface cable for iPod / iPhone (CD-IV202AV) (sold separately)

Lightning to VGA Adapter (Apple Inc. products) (sold separately)

USB interface cable for iPod / iPhone (CD-IU52) (sold separately)

Connecting an iPhone with 30-pin connector

Notes

!For details on how to connect an external device using a separately sold cable, refer to the manual for the cable.

!For details concerning the connection, operations and compatibility of iPhone, refer to Operation Manual.

En 17

Section

02 Connection

Connecting via the AUX input (iPhone)

Connecting via the RGB input (iPhone)

The USB interface cable for iPod / iPhone (CD-

The USB interface cable for iPod / iPhone (CD-

IU201V) (sold separately) is required for the

IU201S) (sold separately) is required for the

connection.

 

connection.

 

USB port 1

This product

USB port 1

This product

 

 

 

USB port 2

AUX input

RGB input

Mini-jack extension cable

 

2 m (6 ft. 7 in.)

iPhone with

 

 

30-pin connector

iPhone with 30-pin connector

USB cable 1.5 m

(4 ft. 11 in.)

USB cable

1.5 m (4 ft. 11 in.)

USB interface cable for iPod / iPhone (CD-IU201V) (sold separately)

Note

Connect the USB cable to USB port 1 when using “Pandora” as the source.

USB interface cable for iPod / iPhone (CD-IU201S) (sold separately)

18 En

Connection

Connecting the Android

Connecting via the MHL port

device

(Android device)

8200NEX 7200NEX 6200NEX

App Connectivity Kit (CD-AH200) (sold separately) is required for the connection.

Notes

!For details on how to connect an external device using a separately sold cable, refer to the manual for the cable.

!For details concerning the connection and operations of Android device, refer to Operation Manual.

!When you connect the High Speed HDMI® Cable, use the lock tie to fix it securely.

=For details, refer to Securing the High Speed HDMI® Cable on page 20.

This product

USB port 2

HDMI port

 

USB cable (supplied with CD-AH200)

High Speed HDMI® Cable (Type A - A)

(supplied with CD-AH200)

Section

02

English

Connecting via the HDMI port (Android device)

This product

USB port 2

HDMI port

USB cable

(supplied with

High Speed HDMI®

Cable (Type A - A)

CD-AH200)

(supplied with

 

Adapter cable

CD-AH200)

 

(HDMI Type A - D)

 

(supplied with CD-AH200)

MHL adapter

 

(supplied with

Android device

CD-AH200)

USB - micro USB cable (Type USB A - micro USB B) (supplied with CD-AH200)

USB - micro USB cable

(Type USB A - micro USB B) Android device (supplied with CD-AH200)

En 19

Section

02 Connection

Connecting via the USB

Securing the High Speed

port (Android device)

HDMI® Cable

The USB interface cable for use with Android devices (CD-MU200) (sold separately) is required for the connection.

This product

USB port 2

Android device

USB cable

(supplied with CD-MU200)

USB - micro USB cable (Type USB A - micro USB B) (supplied with CD-MU200)

Note

8200NEX 7200NEX 6200NEX

Be sure to fix the High Speed HDMI® Cable with the lock tie, when you connect the external device with the High Speed HDMI® Cable.

1Insert the High Speed HDMI® Cable into the HDMI port.

2Wrap the lock tie around the hook above the HDMI port and the High Speed HDMI® Cable, and then tighten it to secure the High Speed HDMI® Cable.

1

3

2

1Hook

2Lock tie

3High Speed HDMI® Cable

pDo not tighten up the lock tie more than necessary.

For details on how to connect an external device using a separately sold cable, refer to the manual for the cable.

20 En

Connection

Connecting a rear view camera

 

 

 

 

 

Rear view camera

 

When this product is used with a rear view

(ND-BC8)

 

camera, it is possible to automatically switch

(sold separately)

 

from the video to rear view image when the

 

 

 

 

 

 

 

 

 

 

shift lever is moved to REVERSE (R). Camera

 

 

 

To video output

 

 

 

View mode also allows you to check what is

 

 

 

behind you while driving.

 

 

 

RCA cable

 

 

 

 

WARNING

 

 

 

(supplied with ND-BC8)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USE INPUT ONLY FOR REVERSE OR MIRROR

 

This product

IMAGE REAR VIEW CAMERA. OTHER USE MAY

 

 

 

RESULT IN INJURY OR DAMAGE.

 

 

CAUTION

 

 

! The screen image may appear reversed.

 

 

! The rear view camera is used as an aid to

 

 

keep an eye on trailers, or backing into a tight

Brown (BC IN)

Power supply

parking spot. Do not use this function for en-

 

Power cord

tertainment purposes.

 

 

 

!Objects in rear view may appear closer or more distant than in reality.

!Please note that the image area shown by the

rear view camera may differ slightly when full-

Violet/white

(REVERSE-GEAR SIGNAL

screen images are displayed when backing

INPUT)

and when checking the rear of the vehicle

 

while moving forward.

 

Section

02

English

For more details about the wiring, refer to Connecting the power cord (2) on page 10.

Notes

!This mode is available when the rear view camera setting is set to “On”. (For details, refer to Operation Manual.)

!Connect this product to the rear view camera

only. Do not connect to any other equipment.

En 21

Loading...
+ 47 hidden pages