Pioneer AVH-X1800S, AVH-X2800BS, AVH-X3800BHS, AVH-X4800BS, AVH-X5800BHS Owner's Manual

0 (0)

AVH-X5800BHS

AVH-X4800BS

AVH-X3800BHS

AVH-X2800BS

AVH-X1800S

DVD RDS AV RECEIVER

RÉCEPTEUR A/V RDS DVD

RADIO AV RDS CON DVD

Important (Serial number)

The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.

Important (numéro de série)

Le numéro de série se trouve sous cet appareil. Pour votre sécurité et votre commodité, pensez à inscrire ce numéro sur la carte de garantie fournie.

Importante (Número de serie)

El número de serie está ubicado en la parte inferior de esta unidad. Para su seguridad y comodidad, asegúrese de registrar este número en la tarjeta de garantía incluida.

Español Français English

Owner’s Manual

Manuel du propriétaire Manual de Instrucciones

Contents

 

Thank you for buying this Pioneer product.

 

Please read through these instructions so you

will know how to operate your model properly.

After you have finished reading the instruc-

 

tions, keep this document in a safe place for

future reference.

 

Important

 

The screens shown in the examples may

 

differ from actual screens, which may be

 

changed without notice for performance and

function improvements.

 

Precaution..........................

4

InformationtoUser ..........................................

4

Important safety information ............................

5

Parking brake interlock.....................................

5

WhenusingadisplayconnectedtoVOUT ......

5

To avoid battery exhaustion ..............................

5

Rearviewcamera ............................................

5

Handling the USB connector ............................

6

Failuretooperate .............................................

6

Visitourwebsite ...............................................

6

ProtectingtheLCDpanelandscreen ...............

6

Notesoninternalmemory ................................

6

Aboutthismanual ............................................

6

Use and care of the remote control ..................

6

Basic operation..................

7

Checkingpartnamesandfunctions .................

7

Remotecontrol ................................................

7

Notes on using the LCD panel .........................

8

Adjusting the LCD panel angle .........................

8

Inserting/ejecting/connectingmedia .................

8

Onirst-timestartup .........................................

8

How to use the screens ..................................

10

SupportedAVsource .....................................

11

DisplayingtheAVoperationscreen ................

11

Selectingasource .........................................

11

Changing the display order of sources ...........

11

Usingthetouchpanel ....................................

11

Registration and

 

connection of Bluetooth®

 

device ...............................

12

2

Displayingthe“Bluetooth”screen ...................

12

RegisteringyourBluetoothdevices ................

12

ConnectingaregisteredBluetoothdevice

 

manually ...................................................

12

Switching visibility ..........................................

13

EnteringthePINcodeforBluetoothwireless

connection ................................................

13

Displaying the device information ...................

13

ClearingtheBluetoothmemory ......................

13

UpdatingBluetoothsoftware ..........................

13

DisplayingtheBluetoothsoftwareversion ......

13

SwitchingtheconnectedBluetoothdevice

.....13

Hands-free phoning.........

14

DisplayingthePhonemenuscreen ................

14

Makingaphonecall .......................................

14

Receiving a phone call ...................................

15

Minimizingthedialconirmationscreen .........

15

Changing the phone settings .........................

15

Using the voice recognition function (for

 

iPhone) .....................................................

15

Setting phone book auto synchronization ......

15

Notes for hands-free phoning .........................

15

Setup for iPod / iPhone or

smartphone......................

16

ThebasiclowofiPod/iPhoneorsmartphone

 

setup.........................................................

16

Settingthedeviceconnectionmethod ............

16

iPodcompatibility ...........................................

16

Androiddevicecompatibility .........................

16

Informationontheconnectionsandfunctions

foreachdevice ..........................................

17

Radio ................................

19

Starting procedure .........................................

19

Storing the strongest broadcast

 

frequencies ...............................................

19

Tuning into strong frequencies .......................

19

HD Radio........................

20

HD Radio stations ..........................................

20

Startingprocedure .........................................

21

Storing the strongest broadcast

 

frequencies ...............................................

21

Display the Radio settings screen ..................

21

Disc...................................

21

Startingprocedure .........................................

23

Selecting iles from the ile name list ..............

23

Switching the media ile type ..........................

23

Searchingforthepartyouwanttoplay ..........

23

Operating the DVD menu ...............................

23

Switching the subtitle/audio language ............

23

OperatingtheDVDmenuusingtouchpanel

 

keys ..........................................................

23

Compressed iles.............

24

Startingprocedure(forDisc) ..........................

26

Startingprocedure(forUSB) ..........................

26

Operationscommontoalliletypes ...............

26

Audio ile operations .......................................

26

Still image ile operations ...............................

26

iPod ..................................

27

Connecting your iPod .....................................

28

Startingprocedure .........................................

28

Selecting song or video sources from the

 

playlist screen ...........................................

28

Using this product’s iPod function from your

 

iPod...........................................................

28

Selectingasongfromthelistrelatedtothe

 

songcurrentlyplaying(linksearch) ...........

28

AppRadioOne ..................

29

Using AppRadioOne ......................................

29

Using the audio mix function ..........................

29

Pandora® ..........................

30

Pandora operations........................................

31

Startingprocedure .........................................

31

Selecting a Pandora station from the list ........

31

Adding a station .............................................

31

Storing the preset stations .............................

31

Spotify®.............................

32

UsingSpotifywithyourPioneercaraudio/

 

video .........................................................

33

Startingprocedure .........................................

33

Selecting a track or station from the list ..........

33

Bluetooth audio player....

34

Startingprocedure .........................................

34

Selecting iles from the ile name list ..............

34

SiriusXM® Satellite

 

Radio ................................

35

SiriusXM tuner operations ..............................

35

Startingprocedure .........................................

36

Selecting a channel from a list of all

 

channels ...................................................

36

Selecting a channel from the category list ......

36

Switchingthedisplayedlist ............................

36

Setting TuneStart.........................................

36

Using TuneScan...........................................

36

Usingcategoryscan ......................................

36

Using TuneMix.............................................

36

About SmartFavorites ....................................

36

Using iTunes Tagging .....................................

36

Activating theTrafic &Weather Now ..............

37

Displayingthe“SiriusXMsettings”screen ......

37

Using SportsFlashlist ..................................

37

UsingFeaturedFavoritesBand ......................

37

Restoringthe“SiriusXMSettings”tothe

 

default.......................................................

38

AUX source ......................

38

Startingprocedure .........................................

38

Setting the video signal ..................................

39

AV input............................

39

Startingprocedure(forAVsource) .................

39

Startingprocedure(forcamera) .....................

39

Settingthevideosignal ..................................

39

MIXTRAX ..........................

40

MIXTRAXoperation .......................................

40

MIXTRAXEZoperation ..................................

40

Displayingthe“MIXTRAXSettings”screen ....

40

Setting the lash pattern .................................

40

System settings ...............

41

Displayingthe“System”settingscreen ..........

41

Setting Bluetooth audio source activation ......

41

Setting Spotify source activation ....................

41

Setting the ever scroll .....................................

41

Settingthebeeptone .....................................

41

Settingtheautoaudiomixfunction ................

41

Setting AppRadioOne Sound .........................

41

Settingtherearviewcamera ..........................

41

Settingthedemomode ..................................

42

Selectingthesystemlanguage ......................

42

Setting the keyboard language with the

 

application for iPhone ................................

42

Adjusting the response positions of the touch

 

panel (touch panel calibration) ..................

42

Settingthedimmer .........................................

42

Adjustingthepicture ......................................

43

Contents

 

Displaying the irmware version .....................

43

Displaying the open source licenses ..............

43

Updating irmware ..........................................

43

Audio adjustments ..........

44

Displaying the“Audio”setting screen .............

44

Using fader/balance adjustment .....................

44

Switchingsoundmuting/attenuation ..............

44

Adjusting source levels ..................................

44

Using the auto level control ............................

44

Adjustingloudness .........................................

44

Settingthesubwooferoutput ..........................

44

Adjustingthecutofffrequencyvalue ..............

44

Switching the rear speaker output ..................

45

UsingBASSBoost .........................................

45

Selectingthelisteningposition .......................

45

Adjustingthespeakeroutputlevelsinely .......

45

Adjustingthetimealignment ..........................

45

Switchingthetimealignmentpreset ...............

45

Usingtheequalizer ........................................

46

Adjusting the equalizer curve automatically

 

(Auto EQ) ..................................................

46

Savingthesoundsettings ..............................

47

Loadingthesoundsettings ............................

47

Theme menu ....................

47

Selecting the background display ...................

47

Settingtheilluminationcolor ..........................

47

Selecting the theme color ...............................

48

Selectingtheclockimage ..............................

48

Setting up the video

 

player................................

48

Settingthetop-prioritylanguages ..................

48

Setting the angle icon display .........................

48

Settingtheaspectratio ..................................

49

Setting parental lock ......................................

49

Displaying your DivX VOD registration

 

code..........................................................

49

DisplayingyourDivXVODderegistration

 

code..........................................................

49

AutomaticplaybackofDVDs ..........................

50

Setting the video signal for the rear view

 

camera......................................................

50

Favorite menu ..................

50

Creatingashortcut ........................................

50

Selecting a shortcut .......................................

50

Removing a shortcut ......................................

50

Common operations........

51

Settingthetimeanddate ...............................

51

Storing song information to an iPod (iTunes

 

Tagging)....................................................

51

Settingthe“SoundRetriever”function ............

51

Changingthewidescreenmode ....................

51

Other functions................

52

Restoringthisproducttothedefault

 

settings .....................................................

52

Connection.......................

52

Precautions....................................................

52

Precautionsbeforeconnectingthesystem

.....52

Beforeinstallingthisproduct ..........................

53

To prevent damage ........................................

53

Notice for the blue/white lead .........................

53

Thisproduct ...................................................

53

Powercord .....................................................

54

Speakerleads ................................................

54

Poweramp(soldseparately) ..........................

54

iPhoneandsmartphone .................................

55

iPhonewithLightningconnector ....................

55

iPhone with 30-pin connector .........................

55

Androiddevice ...............................................

56

Camera..........................................................

56

Externalvideocomponentandthedisplay .....56

Installation .......................

57

Precautions before installation .......................

57

Beforeinstalling .............................................

57

Installation notes ............................................

57

Installationusingthescrewholesonthesideof

thisproduct ...............................................

57

Installing the microphone ...............................

58

Mountingonthesunvisor ..............................

58

Installation on the steering column .................

58

Adjustingthemicrophoneangle .....................

58

Appendix ..........................

59

Troubleshooting .............................................

59

Error messages .............................................

60

Handling and care of discs .............................

62

Playablediscs ................................................

62

Detailed information for playable media .........

63

Bluetooth .......................................................

65

SiriusXM® satellite radio .................................

66

HDRadio Technology ..................................

66

WMA ..............................................................

66

FLAC..............................................................

66

DivX ...............................................................

66

AAC ...............................................................

66

Android........................................................

66

Detailed information regarding connected iPod

devices......................................................

66

Usingapp-basedconnectedcontent ..............

67

Pandora®........................................................

67

Spotify® ..........................................................

67

Notice regarding video viewing ......................

67

Notice regarding DVD-Video viewing .............

67

Notice regarding MP3 ile usage ....................

67

Using the LCD screen correctly ......................

67

Speciications.................................................

68

3

Precaution

Information to User

MODEL NO. : AVH-X5800BHS, AVH-X4800BS, AVHX3800BHS, AVH-X2800BS

Contains FCC ID : AJDK071 Contains/Contient IC : 775E-K071

This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of this device.

The Bluetooth antenna cannot be removed (or replaced) by user.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).

MODEL NO.: AVH-X1800S

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

CAUTION:

USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION:

THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.

CAUTION

This product is a Class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007, and contains a class 1M laser module. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.

CAUTION—CLASS 1M VISIBLE AND INVISIBLE

LASER RADIATION WHEN OPEN, DO NOT VIEW

DIRECTLY WITH OPTICAL INSTRUMENTS.

WARNING

This product contains chemicals known to the State of California and other governmental entities to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

The Safety of Your Ears is in Your Hands

Get the most out of your equipment by playing it at a safe level— a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.

ESTABLISH A SAFE LEVEL:

Set your volume control at a low setting.

Slowly increase the sound until you can hear it comfortably and clearly, without distortion.

Once you have established a comfortable sound level, set the dial and leave it there.

4

Precaution

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:

Do not turn up the volume so high that you can’t hear what’s around you.

Use caution or temporarily discontinue use in potentially hazardous situations.

Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas.

Important safety information

WARNING

Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards.

Do not allow this product to come into contact with liquids. Electrical shock could result. Also, damage to the product, smoke, and overheating could result from contact with liquids.

If liquid or foreign matter should get inside this product, park your vehicle in a safe place, turn the ignition switch off (ACC OFF) immediately and consult your dealer or the nearest authorized Pioneer Service Station. Do not use this product in this condition because doing so may result in a fire, electric shock, or other failure.

If you notice smoke, a strange noise or odor from this product, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or the nearest authorized Pioneer Service Station. Using this product in this condition may result in permanent damage to the system.

Do not disassemble or modify this product, as there are high-voltage components inside which may cause an electric shock. Be sure to consult your dealer or the nearest authorized Pioneer Service Station for internal inspection, adjustments or repairs.

Before using this product, be sure to read and fully understand the following safety information:

Do not operate this product, any applications, or the rear view camera option (if purchased) if doing so will divert your attention in any way from the safe operation of your vehicle. Always observe safe driving rules and follow all existing traffic regulations. If you experience difficulty in operating

this product or reading the display, park your vehicle in a safe location and apply the parking brake before making the necessary adjustments.

Never set the volume of this product so high that you cannot hear outside traffic and emergency vehicles.

To promote safety, certain functions are disabled unless the vehicle is stopped and/or the parking brake is applied.

Keep this manual handy as a reference for operating procedures and safety information.

Do not install this product where it may (i) obstruct the driver’s vision, (ii) impair the performance of any of the vehicle’s operating systems or safety features, including air bags or hazard lamp buttons or (iii) impair the driver’s ability to safely operate the vehicle.

Please remember to fasten your seat belt at all times while operating your vehicle. If you are ever in an accident, your injuries can be considerably more severe if your seat belt is not properly buckled.

Never use headphones while driving.

Parking brake interlock

Certain functions (such as viewing of video image and certain touch panel key operations) offered by this product could be dangerous (possibly resulting in serious injury or death) and/ or unlawful if used while driving. To prevent such functions from being used while the vehicle is in motion, there is an interlock system that senses when the parking brake is set and when the vehicle is moving. If you attempt to use the functions described above while driving, they will become disabled until you stop the vehicle in a safe place, and (1) apply the parking brake, (2) release the parking brake, and then (3) apply the parking brake again. Please keep the brake pedal pushed down before releasing the parking brake.

To ensure safe driving

WARNING

LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND MUST BE CONNECTED TO THE POWER

SUPPLY SIDE OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.

Do not take any steps to tamper with or disable the parking brake interlock system which is in place for your protection. Tampering with or disabling the parking brake interlock system could result in serious injury or death.

To avoid the risk of damage and injury and the potential violation of applicable laws, this product is not for use with a video image that is visible to the driver.

In some countries the viewing of video image on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be obeyed.

If you attempt to watch video image while driving, the warning “Viewing of front seat video source while driving is strictly prohibited.” will appear on the screen. To watch video image on this display, stop the vehicle in a safe place and apply the parking brake. Please keep the brake pedal pushed down before releasing the parking brake.

When using a display connected to V OUT

The video output terminal (V OUT) is for connection of a display to enable passengers in the rear seats to watch video images.

WARNING

NEVER install the rear display in a location that enables the driver to watch video images while driving.

To avoid battery exhaustion

Be sure to run the vehicle engine while using this product. Using this product without running the engine can drain the battery.

WARNING

Do not install this product in a vehicle that does not have an ACC wire or circuitry available.

Rear view camera

With an optional rear view camera, you are able to use this product as an aid to keep an eye on trailers, or backing into a tight parking spot.

WARNING

SCREEN IMAGE MAY APPEAR REVERSED.

USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE.

CAUTION

The rear view mode is to use this product as an aid to keep an eye on the trailers, or while backing up. Do not use this

5

Precaution

function for entertainment purposes.

Handling the USB connector

CAUTION

To prevent data loss and damage to the storage device, never remove it from this product while data is being transferred.

Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using this product.

Failure to operate

After-sales service for Pioneer products

Please contact the dealer or distributor from which you purchased the product for after-sales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below.

Please do not ship your product to the companies at the addresses listed below for repair without making advance contact.

USA&CANADA

Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION

P.O. Box 1760 Long Beach, CA 90801-1760 800-421-1404

For warranty information, please see the Limited Warranty sheet included with your product.

Visit our website

Visit us at the following site:

http://www.pioneerelectronics.com

http://www.pioneerelectronics.ca

1Register your product.

2 Receive updates on the latest products and technologies.

3Download owner’s manuals, order product catalogs, research new products, and much more.

4Receive notices of software upgrades and software updates.

6

Protecting the LCD panel and screen

Do not expose the LCD screen to direct sunlight when this product is not used. This may result in LCD screen malfunction due to the resulting high temperatures.

When using a cellular phone, keep the antenna of the cellular phone away from the LCD screen to prevent disruption of the video in the form of spots, colored stripes, etc.

To protect the LCD screen from damage, be sure to touch the touch panel keys only with your finger and do so gently.

Notes on internal memory

Before removing the vehicle battery

Some of the settings and recorded contents will not be reset.

Data subject to erasure

The information is erased by disconnecting the yellow lead from the battery (or removing the battery itself).

Some of the settings and recorded contents will not be reset.

Resetting the microprocessor

CAUTION

Pressing the RESET button resets settings and recorded contents to the factory settings.

Do not perform this operation when a device is connected to this product.

Some of the settings and recorded contents will not be reset.

The microprocessor must be reset under the following conditions:

Prior to using this product for the first time after installation.

If this product fails to operate properly.

If there appears to be problems with the operation of the system.

If your vehicle position is shown on the map with a significant positioning error.

1 Turn the ignition switch OFF.

2 Press the RESET button with a pen tip or other pointed implement.

Refer to Checking part names and functions on page 7 Settings and recorded contents are reset to the factory settings.

About this manual

This manual uses diagrams of actual screens to describe operations. However, the screens on some units may not match those shown in this manual depending on the model used.

Meanings of Symbols Used in This

Manual

X0000BT

This indicates model name that are supported

the described operations.

 

 

This indicates to touch an appropriate soft key

 

on the touch screen.

 

 

 

This indicates to touch and hold an appropri-

HOLD

ate soft key on the touch screen.

 

 

 

This indicates that there is a reference or

 

supplementary for the key or screen.

 

 

Use and care of the remote control

Installing the battery

Slide the tray on the back of the remote control out and insert the battery with the plus (+) and minus (–) poles aligned properly.

When using for the first time, pull out the film protruding from the tray.

WARNING

Do not ingest the battery, Chemical Burn Hazard.

This product, including the supplied remote control, contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in

Precaution

just two hours and can lead to death.

Keep new or used batteries out of the reach of children. If the battery is swallowed or placed inside any part of the body, consult a doctor immediately.

If the battery compartment does not close securely, stop using the product and keep it away from children.

Batteries (battery pack or batteries installed) must not be exposed to excessive heat such as sunshine, fire or the like.

CAUTION

Remove the battery if the remote control is not used for a month or longer.

There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.

Do not handle the battery with metallic tools.

Do not store the battery with metallic objects.

If the battery leaks, wipe the remote control completely clean and install a new battery.

When disposing of used batteries, comply with governmental regulations or environmental public institutions’ rules that apply in your country/area.

“Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. (Applicable to California, U.S.A.)”

Using the remote control

Point the remote control in the direction of the front panel to operate.

The remote control may not function properly in direct sunlight.

Important

Do not store the remote control in high temperatures or direct sunlight.

Do not let the remote control fall onto the floor, where it may become jammed under the brake or gas pedal.

Basic operation

Checking part names and functions

X5800BHS X4800BS

1 2 3 4 5 6 7 8

9

1LCD screen

2Volume (+/) button

3DISP On the AV operation screen, press to turn the

button

display off.

 

On the Application screen or navigation mode,

 

press to display the side control bar. Press and

 

hold to turn the display off.

 

P When the display is turned off, touch the

 

screen to revert to the original screen.

4

button

Press to display the top menu screen.

 

Press and hold to activate the voice recogni-

 

 

 

 

tion function.

 

 

Refer to Using the voice recognition func-

 

 

tion (for iPhone) on page 15

5MODE Press to switch between the Application

button

screen and the AV operation screen.

 

Press and hold to switch to the camera view

 

mode.

6TRK Press to return to the previous track (chapter)

)

or go to the next track (chapter).

Press and hold to perform fast reverse or fast

button

forward.

 

 

Press to answer or end a call.

7button

8

RESET

 

Refer to Resetting the microprocessor on

 

button

 

page 6

9

Disc-

 

Refer to Inserting and ejecting a disc on

 

loading

 

page 8

 

slot

 

 

X3800BHS X2800BS

X1800S

 

 

 

 

 

7

9

1

Remote control

 

 

 

 

 

 

8

 

 

 

1 2 3

 

 

 

 

 

 

 

 

2

 

 

 

 

8

A

5

 

 

7

4

 

B

4

 

 

9

 

 

 

5

 

3

 

 

 

 

 

 

6

C

6

 

 

 

7

Basic operation

1Volume (+/)

2MODE Press to switch between the Application

 

 

screen and the AV operation screen.

 

 

Press and hold to switch to the camera view

 

 

mode.

3

SRC

Press to cycle through all the available

 

 

sources.

 

 

Press and hold to turn the source off.

4

TOP

Returns to the top menu during DVD playback.

 

MENU

 

5MENU Displays the DVD menu during DVD playback.

6

Thumb

Selects a menu on the DVD menu.

 

pad

 

7

MUTE

 

8AUDIO Changes the audio language, subtitle lan- SUBTITLE guage or viewing angle during DVD playback.

ANGLE

9BAND/ Selects the tuner band when tuner is selected

 

 

ESC

as a source.

 

 

 

 

Cancels the control mode of functions.

 

 

 

 

Switches between media file types when play-

 

 

 

 

ing the data of Disc, USB.

10 RETURN

Returns to the specified point and begins

 

 

 

 

playback from there.

11

 

 

 

Pauses or resumes playback.

 

 

 

 

 

 

 

 

or

For audio: Press and hold to perform fast

 

 

 

reverse or fast forward.

 

 

 

 

 

 

 

 

For video: Press to perform fast reverse or fast

 

 

 

 

forward.

 

 

 

or

Press to return to the previous track (chapter)

 

 

 

or go to the next track (chapter).

 

 

 

 

 

 

 

 

Press to answer or end a call.

 

 

 

 

Stops playback.

 

 

 

 

 

 

 

 

If you resume playback, playback will start

 

 

 

 

from the point where you stopped. Touch the

 

 

 

 

key again to stop playback completely.

12 FOLDER/P. Selects the next or previous disc or folder.

 

 

CH

Recalls radio station frequencies assigned to

 

 

 

 

preset channel keys.

Notes on using the LCD panel

WARNING

Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fingers.

Do not use with the LCD panel left open. It may result in injury in the event of an accident.

CAUTION

Do not open or close the LCD panel by force. It may cause a malfunction.

Do not operate this product until the LCD panel has completely opened or closed. The LCD panel may stop at that angle for safety.

Do not place a glass or can on the open LCD panel.

Adjusting the LCD panel angle

X5800BHS X4800BS

1 Press thebutton.

2Touch or to adjust the angle of the LCD panel.

3 Touch .

Returns to the previous screen.

Inserting/ejecting/connecting media

CAUTION

Do not insert anything other than a disc into the disc-loading slot.

Inserting and ejecting a disc

Inserting a disc

X5800BHS X4800BS

1 Press thebutton.

2 Touch to open the LCD panel.

3 Insert a disc into the disc-loading slot.

Ejecting a disc

X5800BHS X4800BS

1 Press thebutton.

2 Touch to open the LCD panel.

3 Remove the disc, and press thebutton.

Inserting a disc

X3800BHS X2800BS X1800S

1 Insert a disc into the disc-loading slot.

Ejecting a disc

X3800BHS X2800BS X1800S

1 Pressbutton to eject a disc.

Plugging and unplugging a USB storage device

PThis product may not achieve optimum performance with some USB storage devices.

PConnection via a USB hub is not possible.

PA USB cable is required for connection.

1Pull out the plug from the USB port of the USB cable.

2 Plug a USB storage device into the USB cable.

1

2

1 USB cable

2 USB storage device

Check that no data is being accessed before pulling out the USB storage device.

On irst-time startup

1 Start the engine to boot up the system.

The “Select Program Language” screen appears.

8

Basic operation

PFrom the second time on, the screen shown will differ depending on the previous conditions.

2 Touch the language.

3 Touch .

The “Speaker Mode Settings” screen appears.

4 Touch the speaker modes.

Standard Mode

4-speaker system with front and rear speakers, or a 6-speaker system with front and rear speakers and subwoofers.

Network Mode

3-way system with a high range speaker, middle range speaker and subwoofer (low range speaker) for reproduction of high, middle and low frequencies (bands).

WARNING

Do not use the unit in standard mode when a speaker system for 3-way network mode is connected to this unit. This may cause damage to the speakers.

5 Touch [OK].

The “Smartphone Setup” screen appears.

6 Touch the item.

Refer to Information on the connections and functions for each device on page 17

7 Touch .

The top menu screen appears.

POnce the speaker mode is set, the setting cannot be changed unless this product is restored to the default settings. Restore the default settings to change the speaker

mode setting.

Refer to Restoring the default settings on page 52

Switching the speaker mode

To change the speaker mode, you need to restore this product to the default settings.

1 Restore the default setting.

Refer to Restoring the default settings on page 52

9

Pioneer AVH-X1800S, AVH-X2800BS, AVH-X3800BHS, AVH-X4800BS, AVH-X5800BHS Owner's Manual

Basic operation

How to use the screens

Application menu screen

*4

Time and date setting screen

 

 

 

 

 

 

 

 

 

10

6

2016

21

 

48

 

Setting menu screen

Abcdefg

Abcdefg

Abcdefg

Abcdefg

Abcdefg

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Month/Date

 

d/m/y m/d/y

y/m/d

 

System

 

 

 

 

 

 

6/10 2148

 

 

 

Time Format

 

 

12hour

24hour

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Depending on the connection

 

 

*1

*2

 

 

 

 

 

 

 

 

 

 

method, the "smartphone setup"

 

Top menu screen

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

screen is displayed.

 

 

 

 

 

 

21 48

 

 

 

 

Application operation screen

*4

 

 

6/10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Source Select

 

 

 

 

 

 

 

 

 

 

 

 

 

AV operation screen

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

iPod

 

6/10 21 48

 

Abcdefg

 

Abcdefg

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Abcdefghi

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Abcdefghi

 

 

 

Abcdefg

 

Abcdefg

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ABC

Pops

 

 

 

 

 

6/10 2148

 

 

 

 

 

 

 

 

 

iPod

 

 

 

99999/99999

You can control the iPhone or

 

 

 

 

 

 

 

 

 

 

 

9999’99”

-9999’99”

 

smartphone applications directly

 

 

 

 

 

 

 

 

 

 

 

 

 

 

on this product.

 

 

 

 

 

 

 

 

 

 

 

 

 

Phone menu screen

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Phone Book

3

ABC

Recent application icons

 

Favorite source icons

 

*3

 

 

 

 

 

 

 

abcdefghi...

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

abcdefghi

 

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

abcdefghi

 

C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*5

abcdefghi

 

D

 

 

 

 

 

 

 

 

AV source selection screen

 

E

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

abcdefghi

 

F

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

G

 

 

 

 

 

 

 

 

 

 

 

 

6/10 21 48

 

abcdefghi

 

 

 

 

 

 

 

 

 

 

Disc

HD Radio

Pandora

AUX

iPod

 

 

 

 

 

 

 

 

 

 

 

 

 

SiriusXM

Spotify

AV

Bluetooth

Camera

HD Radio

 

 

 

 

 

 

 

 

 

 

 

 

Audio

View

 

 

 

 

 

 

 

 

 

 

 

 

Source OFF Power OFF

 

 

 

 

 

 

 

 

10

Basic operation

*1

The top menu screen of this manual is the screen

 

when using the AppRadioOne. The items displayed

 

on the screen may vary depending on the connecting

 

device or mode. When you connect an iPhone via

 

Bluetooth wireless technology or a smartphone via

 

USB cable, “Smartphone Setup” screen appears by

 

touching [APPS].

*2

By pressing the

 

button on any screen you can

 

 

 

display the Top menu screen.

*3

When you connect the external navigation system to

 

this unit, the navigation mode key is displayed at the

 

left bottom of the display.

*4

By pressing the MODE button you can switch

 

between the Application screen and the AV operation

 

screen.

*5

If you select “Power OFF”, you can turn off almost all

 

functions. The “Power OFF” mode is released in the

following cases:

An incoming call is received.

A rear view camera image is input when the vehicle reverses.

A button on this product is pressed.

The ignition switch is turned off (ACC OFF), then turned on (ACC ON).

Supported AV source

You can play or use the following sources with this product.

Radio (AVH-X4800BS)(AVH-X2800BS)(AVH-X1800S)

HD Radio (HD Radio™ tuner) (AVH-X5800BHS) (AVH-X3800BHS)

CD

ROM (compressed audio files)

DVD-Video

USB

The following sources can be played back or used by connecting an auxiliary device.

iPod

Spotify®

Pandora®

Bluetooth audio (AVH-X5800BHS)(AVH-X4800BS)(AVH- X3800BHS)(AVH-X2800BS)

SiriusXM® Satellite Radio

AV input (AV)

AUX

Displaying the AV operation screen

1 Press .

2 Touch the AV operation key.

The AV operation screen appears.

1

 

 

 

iPod

6/10 21 48

 

 

 

 

 

 

 

 

 

 

 

 

 

Abcdefghi

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Abcdefghi

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ABC

Pops

 

 

 

 

 

 

 

 

 

 

 

99999/99999

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9999’99”

 

-9999’99”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Displays the source list.

Selecting a source

Source on the AV source selection screen

1 Display the “AV source selection” screen.

2 Touch the source icon.

P When you select “Source OFF”, the AV source is turned off.

Source on the source list

1 Display the source list.

Refer to Displaying the AV operation screen on page 11

2 Touch the source key.

P When you select “Source OFF”, the AV source is turned off.

Changing the display order of sources

Changing the display order of source icons

1 Display the “AV source selection” screen.

2Touch and hold a source icon, and drag the icon to the desired position.

Changing the display order of source keys

1 Display the source list.

Refer to Displaying the AV operation screen on page 11

2 Touch .

3 Drag the source key to the desired position.

Using the touch panel

You can operate this product by touching the keys on the screen directly with your fingers.

PTo protect the LCD screen from damage, be sure to touch the screen only with your finger gently.

Common touch panel keys

: Returns to the previous screen.

: Closes the screen.

11

Basic operation

Operating list screens

 

 

1

2

 

Songs

 

 

 

Playlist

abcdefghi

 

MUSIC

Artist

abcdefghi

 

 

Alburm

abcdefghi

3

 

 

VIDEO

Songs

abcdefghi

 

 

 

 

 

Podcast

abcdefghi

 

1Touching an item on the list allows you to narrow down the options and proceed to the next operation.

2Appears when all characters are not displayed on the display area.

If you touch the key, the rest are scrolled for display.

3Appears when items cannot be displayed on a single page. Drag the slider bar or the list to view any hidden items.

Operating the time bar

1

9999’99” -9999’99”

1 You can change the playback point by dragging the key.

PPlayback time corresponding to the position of the key is displayed while dragging the key.

Switching the operation panel

1 Touch .

The hidden function keys appears.

P This key does not appear for some AV sources.

12

Registration and connection of Bluetooth® device

X5800BHS X4800BS X3800BHS X2800BS

Displaying the “Bluetooth” screen

1 Press .

2 Touch , and then .

The “Bluetooth” screen appears.

Registering your Bluetooth devices

P If three devices are already paired, “Memory Full” is displayed. Delete a paired device first.

Refer to Deleting a registered device on page 12

1Activate the Bluetooth wireless technology on your devices.

2 Display the “Bluetooth” screen.

Refer to Displaying the “Bluetooth” screen on page 12

3 Touch [Connection].

4 Touch .

The system searches for Bluetooth devices waiting for a connection and displays them in the list if a device is found.

5 Touch the Bluetooth device name.

After the device is successfully registered, a Bluetooth connection is established by the system. Once the connection is established, the device name is displayed on the list.

PIf your device supports SSP (Secure Simple Pairing), a sixdigit number appears on the display of this product. Touch [Yes] to pair the device.

PThe Bluetooth connection can be also made by detecting this product from the Bluetooth device. Before registration, make sure that “Visibility” in the “Bluetooth” menu is set to “On”. For details on a Bluetooth device operations, refer to the operating instructions supplied with the Bluetooth device.

Refer to Switching visibility on page 13

PTwo cellular phones can be connected to this product at the same time.

Refer to Switching the connected Bluetooth device on page 13

PIf you try to connect an unconnected cellular phone while two cellular phones are already connected, the first one of the two connected cellular phones will be disconnected and the unconnected cellular phone will be connected instead.

Setting Bluetooth device auto connection

This function connects the last connected Bluetooth device to this product automatically as soon as the two devices are less than a few meters apart.

The default setting is “On”.

PIf two Bluetooth devices were connected the last time, the two devices are connected to this product automatically in the order that they are registered in the device list.

1 Display the “Bluetooth” screen.

Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [Auto Connect] to switch “On” or “Off”.

Deleting a registered device

CAUTION

Never turn this product off while the paired Bluetooth device is being deleted.

1 Display the “Bluetooth” screen.

Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [Connection].

3 Touch .

Connecting a registered Bluetooth device manually

Connect the Bluetooth device manually in the following cases:

Two or more Bluetooth devices are registered, and you want to manually select the device to be used.

You want to reconnect a disconnected Bluetooth device.

Connection cannot be established automatically for some reason.

1Activate the Bluetooth wireless technology on your devices.

2 Display the “Bluetooth” screen.

Refer to Displaying the “Bluetooth” screen on page 12

Registration and connection of Bluetooth® device

3 Touch [Connection].

4 Touch the name of the device.

PTo disconnect the device, touch the name of the connected device in the list.

Switching visibility

This function sets whether or not to make this product visible to the other device.

The default setting is “On”.

1 Display the “Bluetooth” screen.

Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [Visibility] to switch “On” or “Off”.

Entering the PIN code for Bluetooth wireless connection

To connect your Bluetooth device to this product, you need to enter a PIN code.

You can change the PIN code with this function. P The default PIN code is “0000”.

1 Display the “Bluetooth” screen.

Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [PIN Code Input].

3Touch [0] to [9] to input the pin code (up to 8 -digits).

4 Touch .

Displaying the device information

1 Display the “Bluetooth” screen.

Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [Device Information].

The device name and address of the Bluetooth device on this product are displayed.

Clearing the Bluetooth memory

PThis setting is available only when you stop your vehicle in a safe place and apply the parking brake.

CAUTION

Never turn this product off while the Bluetooth memory is being cleared.

1 Display the “Bluetooth” screen.

Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [Bluetooth Memory Clear].

3 Touch [Clear].

The confirmation screen appears.

Updating Bluetooth software

This function is used to update this product with the latest Bluetooth software. For details on Bluetooth software and updating, refer to our website.

PThe source is turned off and the Bluetooth connection is disconnected before the process starts.

PThis setting is available only when you stop your vehicle in a safe place and apply the parking brake.

PYou need to store the version update file to the USB storage device in advance.

CAUTION

Never turn this product off and never disconnect the phone while the software is being updated.

1 Connect the USB storage device stored the version update file to this unit.

Refer to Plugging and unplugging a USB storage device on page 8

2 Display the “Bluetooth” screen.

Refer to Displaying the “Bluetooth” screen on page 12

3 Touch [BT Software Update].

4 Touch [Start].

Follow the on-screen instructions to finish updating the Bluetooth software.

Displaying the Bluetooth software version

If this product fails to operate properly, you may need to consult your dealer for repair.

In such cases, perform the following procedure to check the software version on this unit.

1 Display the “Bluetooth” screen.

Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [Bluetooth Version Information].

The version of this product’s Bluetooth module appears.

Switching the connected Bluetooth device

After registering and connecting the Bluetooth devices to this product, you can switch among the devices using the switch devices key in the phone function and some audio sources.

PYou can register up to three Bluetooth devices on this product.

Refer to Registering your Bluetooth devices on page 12

PYou can connect one of the registered devices to this product. In cases where the registered device is equipped with a phone function, a total of two devices can be connected at the same time when using the phone function. If two of the three registered devices are already connected, you can

connect the remaining third device to use the audio function only from the switch devices key on the audio source screen.

PThe icon for the cellular phone currently being used is displayed on the “Phone menu” screen. If you connect two cellular phones to this product at the same time, you can switch between the cellular phones using the switch devices key. The contents of the phone menu are memorized for each connected cellular phone.

Refer to Hands-free phoning on page 14

PThe switch devices key will appear for some audio sources. The audio source may automatically switch to another source depending on the selected device.

13

Hands-free phoning

X5800BHS X4800BS X3800BHS X2800BS

Synchronizes the contacts on this product's phone book with the contacts on your phone manually.

Phone Book

3

ABC

abcdefghi...

*1

 

 

 

abcdefghi

A

 

 

 

 

 

 

*2

 

 

 

abcdefghi

B

 

 

 

 

 

C

 

*3

 

 

 

abcdefghi

D

 

 

 

 

 

E

 

*4

 

 

 

 

 

 

 

 

abcdefghi

F

 

 

 

 

 

 

*5

 

 

 

abcdefghi

G

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*6

Switches the search language to

English or system language.

*1

Switches to the preset dial screen.

 

Refer to Using the preset dial lists on page 14

*2

Switches to the phone book list.

 

Refer to Calling a number in the phone book on

 

page 14

*3

Switches to the missed, received and dialed call lists.

 

Refer to Dialing from the history on page 14

*4

Switches the mode to enter the phone number

 

directly.

Refer to Direct dialing on page 14

*5

Switches to the voice recognition function (for

 

iPhone).

 

 

Refer to Using the voice recognition function (for

 

 

iPhone) on page 15

*6

If you connect two cellular phones to this product at

 

the same time, you can switch between the cellular

 

phones using the switch devices key. The following

 

items are displayed on the key.

 

 

Name of the current cellular phone

 

 

List number of the current cellular phone

 

 

Battery status of the current cellular phone

 

 

Reception status of the current cellular phone

 

 

Refer to Switching the connected Bluetooth device

on page 13

CAUTION

For your safety, avoid talking on the phone as much as possible while driving.

To use this function you need to connect your cellular phone to this product via Bluetooth in advance.

Refer to Registration and connection of Bluetooth® device on page 12

Displaying the Phone menu screen

1 Press .

2 Touch .

The Phone menu screen appears.

Making a phone call

You can make a phone call in many different ways.

Direct dialing

1 Display the “Phone menu” screen.

Refer to Displaying the Phone menu screen on page 14

2 Touch .

3Touch the number keys to enter the phone number.

4 Touch to make a call. 5 Touch to end the call.

Calling a number in the phone book

PThe contacts on your phone will be automatically transferred to this product.

PVisibility” of the “Bluetooth” screen should be on.

Refer to Switching visibility on page 13

PIf two cellular phones are automatically connected to this product with the Bluetooth device auto connect function, the phone book of the second phone is displayed.

1 Display the “Phone menu” screen.

Refer to Displaying the Phone menu screen on page 14

2 Touch .

3 Touch the desired name on the list.

4 Touch the phone number.

The dial screen appears and dialing starts.

5 Touch to end the call.

Dialing from the history

1 Display the “Phone menu” screen.

Refer to Displaying the Phone menu screen on page 14

2 Touch .

3 Touch the item to switch the history list.

The following items are available:

: Received call list

: Dialed call list

: Missed call list

4 Touch the desired entry on the list to make a call.

The dial screen appears and dialing starts.

5 Touch to end the call.

Using the preset dial lists

Registering a phone number

You can easily store up to six phone numbers per device as presets.

1 Display the “Phone menu” screen.

Refer to Displaying the Phone menu screen on page 14

2 Touch or .

On the “Phone Book” screen, touch the desired name to display the contact’s phone number.

14

P You may hear a noise when you hang up the phone.

 

Hands-free phoning

3 Touch .

Dialing from the preset dial list

1 Display the “Phone menu” screen.

Refer to Displaying the Phone menu screen on page 14

2 Touch .

3 Touch the desired item.

The dial screen appears and dialing starts.

Receiving a phone call

PWhen two phones are connected at the same time, if an incoming call is received on the second phone while you are talking on the first phone, the dial confirmation screen for the second phone will be displayed.

1Touch to answer the call.

If you touch while getting a call waiting, you can switch to the talking person.

Touch to reject the call.

2 Touch to end the call.

Minimizing the dial conirmation screen

PThe dial confirmation screen cannot be minimized on the AV operation screen.

PAV sources cannot be selected even if the dial confirmation screen is minimized while talking on the phone or receiving an incoming call.

1Touch .

Touch to display the dial confirmation screen again.

Changing the phone settings

Setting auto answering

You can select whether or not to answer a call automatically. The default setting is “Off”.

PEven if an incoming call is received on the other connected phone while you are talking on the phone, the incoming call will not be answered automatically.

1 Display the “Bluetooth” screen.

Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [Auto Answer] to switch “On” or “Off”.

Switching the ring tone

You can select whether or not to use this product’s ring tone. The default setting is “On”.

1 Display the “Bluetooth” screen.

Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [Ring Tone] to switch “On” or “Off”.

Inverting names in the phone book

You can use this function to change the order of the first and last names in the phone book.

1 Display the “Bluetooth” screen.

Refer to Displaying the “Bluetooth” screen on page 12

2 Touch [Invert Name].

Setting the private mode

During a conversation, you can switch to private mode (talk directly on your cellular phone).

1 Touch or to turn private mode on or off.

PIf two cellular phones are connected to this product and the first phone is set to private mode, you can receive incoming calls on the second phone while maintaining the call in progress on the first phone.

PWhen two cellular phones are connected to this product and private mode of the first phone is turned off, if an incoming call on the second phone is answered while a call is in progress on the first phone or while dialing or receiving a call on the first phone, the call, dialing, or receiving on the first phone is ended.

Adjusting the other party’s listening volume

This product can be adjusted to the other party’s listening volume.

1Touch to switch between the three volume levels.

Using the voice recognition function (for iPhone)

By connecting your iPhone to this product, you can use the voice recognition function (Siri Eyes Free Mode) on this product.

PWhen an iPhone running iOS 6.1 or higher is used, Siri Eyes Free Mode is available with this product.

PIn this chapter, iPhone and iPod touch will be referred to as “iPhone”.

1 Display the “Phone menu” screen.

Refer to Displaying the Phone menu screen on page 14

2 Touch .

The voice recognition function launches and the voice control screen appears.

PYou can also launch the voice recognition function by pressing and holding .

PIf two cellular phones are automatically connected to this product with the Bluetooth device auto connect function, the voice recognition function (Siri Eyes Free Mode) will be set on the second phone.

PIf you want to use the voice recognition function (Siri Eyes Free Mode) on another connected iPhone, touch 1 2 3 to switch to the other iPhone. The iPhone that you switch to will be set as the current device.

Setting phone book auto synchronization

You can select whether or not to synchronize the the phone book with the contacts on your phone automatically when you connect the phone to this product.

The default setting is “Off”.

1 Display the “Bluetooth” screen.

Refer to Displaying the “Bluetooth” screen on page 12

2Touch [Phone Book Auto Synchronize] to switch “On” or “Off”.

Notes for hands-free phoning

General notes

Connection to all cellular phones featuring Bluetooth wireless technology is not guaranteed.

The line-of-sight distance between this product and your cellular phone must be 10 meters or less when sending and receiving voice and data via Bluetooth technology.

15

Hands-free

phoning

With some cellular phones, the ring sound may not be output from the speakers.

If private mode is selected on the cellular phone, hands-free phoning may be disabled.

Registration and connection

Cellular phone operations vary depending on the type of cellular phone. Refer to the instruction manual that came with your cellular phone for detailed instructions.

When phone book transfer does not work, disconnect your phone and then perform pairing again from your phone to this product.

Making and receiving calls

You may hear a noise in the following situations:

When you answer the phone using the button on the phone.

When the person on the other end of the line hangs up the phone.

If the person on the other end of the line cannot hear the conversation due to an echo, decrease the volume level for hands-free phoning.

With some cellular phones, even after you press the accept button on the cellular phone when a call comes in, handsfree phoning may not be performed.

The registered name will appear if the phone number is already registered in the phone book. When one phone number is registered under different names, only the phone number will be displayed.

The received call and the dialed number histories

You cannot make a call to the entry of an unknown user (no phone number) in the received call history.

If calls are made by operating your cellular phone, no history data will be recorded in this product.

Phone book transfers

If there are more than 1 000 phone book entries on your cellular phone, not all entries may download completely.

Depending on the phone, this product may not display the phone book correctly.

If the phone book in the phone contains image data, the phone book may not be transferred correctly.

Depending on the cellular phone, phone book transfer may not be available.

Setup for iPod / iPhone or smartphone

When using an iPod / iPhone or a smartphone with this product, configure the settings of this product according to the device to be connected.

This section describes the settings required for each device.

The basic low of iPod / iPhone or smartphone setup

1 Select the method for connecting your device.

Refer to Setting the device connection method on page

16

2 Connect your device to this product.

Refer to Connection on page 52

3 If necessary, connect your device to this product via Bluetooth connection.

Refer to Registration and connection of Bluetooth® device on page 12

Setting the device connection method

To use the application for iPhone or smartphone on this product, select the method for connecting your device.

Settings are required according to the connected device.

1 Display the “System” setting screen.

2 Touch [Input/Output settings].

3 Touch [Smartphone Setup].

4 Touch the following settings.

Device: Select the device to be connected.

Connection / Application: Select the connection method.

Refer to Information on the connections and functions for each device on page 17

The setting will change after the following processes are automatically executed.

The source is turned off.

AppRadioOne is exited.

The smartphone connection (USB and Bluetooth) is disconnected.

iPod compatibility

This product supports only the following iPod models and iPod software versions. Others may not work correctly.

iPhone 4, 4s, 5, 5c, 5s, 6, 6 Plus: iOS 7.0 or later.

iPhone 3GS: iOS 6.0.1

iPod touch (4th, 5th generation): iOS 6.0.1

iPod touch (3rd generation): iOS 5.1.1

iPod touch (2nd generation): iOS 4.2.1

iPod classic 160GB (2009): Ver. 2.0.4

iPod classic 160GB (2008): Ver. 2.0.1

iPod classic 80GB: Ver. 1.1.2

iPod nano (7th generation)

iPod nano (6th generation): Ver. 1.2

iPod nano (5th generation): Ver. 1.0.2

iPod nano (4th generation): Ver. 1.0.4

iPod nano (3rd generation): Ver. 1.1.3

PYou can connect and control an iPod compatible with this product by using separately sold connector cables.

POperation methods may vary depending on the iPod model and the software version.

PDepending on the software version of the iPod, it may not be compatible with this product.

For details about iPod compatibility with this product, refer to the information on our website.

This manual applies to the following iPod models. iPod with 30-pin connector

iPhone 3GS, 4, 4s

iPod touch 2nd, 3rd, 4th generation

iPod classic 80GB, 160GB

iPod nano 3rd, 4th, 5th, 6th generation iPod with Lightning connector

iPhone 6, 6 Plus

iPhone 5, 5c, 5s

iPod touch 5th generation

iPod nano 7th generation

Androiddevice compatibility

POperation methods may vary depending on the Android device and the software version of the Android OS.

PDepending on the version of the Android OS, it may not be compatible with this product.

PCompatibility with all Android devices is not guaranteed. For details about Android device compatibility with this product, refer to the information on our website.

16

Setup for iPod / iPhone or smartphone

Information on the connections and functions for each device

The settings and cables required for connecting each device, and the available sources are as follows.

iPod / iPhone with a 30-pin connector

Device connection method

 

When connecting via Bluetooth

When connecting via CD-IU201V (sold

When connecting via CD-IU51 (sold

 

 

(AVH-X5800BHS) (AVH-X4800BS) (AVH-

separately)

separately)

 

 

X3800BHS) (AVH-X2800BS)

 

 

Smartphone Setup

Device

iPhone / iPod

iPhone / iPod

iPhone / iPod

 

Connection

Wireless via BT

USB

USB

Bluetooth connection

 

Bluetooth connection is required.

Available sources

iPod (audio)

 

 

 

 

iPod (video)

 

 

Pandora

 

 

 

 

Spotify

 

 

 

iPod / iPhone with a Lightning connector

Device connection method

 

When connecting via Bluetooth

When connecting via CD-IU52 (sold separately)

 

 

(AVH-X5800BHS) (AVH-X4800BS) (AVH-X3800BHS)

 

 

 

(AVH-X2800BS)

 

Smartphone Setup

Device

iPhone / iPod

iPhone / iPod

 

Connection

Wireless via BT

USB

Bluetooth connection

 

Bluetooth connection is required.

Available sources

iPod (audio)

 

 

 

iPod (video)

 

Pandora

 

 

 

Spotify

 

 

 

AppRadioOne

 

Android device

Device connection method

 

When connecting via Bluetooth

When connecting via CD-MU200 (sold separately)

 

 

(AVH-X5800BHS) (AVH-X4800BS) (AVH-X3800BHS)

 

 

 

(AVH-X2800BS)

 

Smartphone Setup

Device

Others

Others

 

Application

USB/MTP

AppRadioOne

Bluetooth connection

 

Bluetooth connection is required.

17

Setup for iPod / iPhone or smartphone

Android device

Available sources

Pandora

 

 

Spotify

 

 

AppRadioOne

 

 

 

 

When “Application” of “Smartphone Setup” is set to

 

 

 

AppRadioOne”.

18

Radio

X4800BS X2800BS X1800S

Displays the preset channel list.

Select an item on the list ("1" to "6") to switch to the preset channel.

Selects the FM1, FM2, FM3 or AM band.

1

 

 

6/10 21 48

 

FM1

AM

 

2Radio

 

3

Abcdefghi

 

 

 

 

4

Abcdefghi

 

Abcdefghi

 

 

 

5

 

 

 

6

 

 

 

000.00MHZ

 

 

 

 

 

 

 

 

 

 

 

 

Performs manual tuning.

HOLD Performs seek tuning or non stop seek tuning.

Releasing the key in a few seconds, skips to the nearest station from the current frequency.

Keeping holding the key for a long seconds, performs non stop seek tuning.

Recalls the preset channel stored to a key from memory.

HOLD Stores the current broadcast frequency to a key.

Stores song information to an iPod.

Refer to Storing song information to an iPod (iTunes Tagging) on page 51

PBy pressingor, you can also switch the preset channels.

PBy pressing and holdorand release, you can also perform seek tuning.

PBy keeping touching and holding or , you can perform non stop seek tuning. Touch again to cancel.

Starting procedure

1 Display the “AV source selection” screen.

2 Touch [Radio].

The “Radio” screen appears.

Storing the strongest broadcast frequencies

The BSM (best stations memory) function automatically stores the six strongest broadcast frequencies under the preset tuning keys “1” to “6”.

PStoring broadcast frequencies with BSM may replace those you have already saved.

PPreviously stored broadcast frequencies may remain stored if the number of frequencies stored has not reached the limit.

1 Touch .

2 Touch to begin a search.

While the message is displayed, the six strongest broadcast frequencies will be stored under the preset tuning keys in order of their signal strength.

If you touch [Cancel], the storage process is canceled.

Tuning into strong frequencies

PThis setting is available only when “Radio” is selected as the source.

Local seek tuning allows you to only tune into those radio stations with sufficiently strong signals.

1 Display the “System” setting screen.

2 Touch [AV Source Settings].

3 Touch [Radio settings].

4 Touch [Local].

5 Touch the item.

Off (default):

Turns the seek tuning setting off.

Level1 to Level4:

Sets the level of sensitivity for FM to Level1 to Level4 (for

AM Level1 or Level2).

PThe FM “Level4” (AM “Level2”) setting allows reception of only stations with the strongest signals.

19

HD Radio

X5800BHS X3800BHS

Switches the text display between the main channel and sub channels.

Displays the preset channel list.

Select an item on the list ("1" to "6") to switch to the preset channel.

Selects the FM1, FM2, FM3 or AM band.

1

6/10

21 48

2

Radio

 

 

FM1 AM

 

 

3

Abcdefghi

 

 

 

 

 

4

Abcdefghi

 

 

Abcdefghi

 

 

5

 

 

 

ᵦᵢ

ᵢᵧᵥᵧᵲᵟᵪ

6

000.0MHZ ᵦᵢᵏ

 

 

 

 

HD Radio indicator and

 

Signal type indicator

1

6/10

21 48

2

Radio

 

 

FM1 AM

 

 

3

Abcdefghi

 

 

 

 

 

4

Abcdefghi

 

 

Abcdefghi

 

 

5

 

 

 

ᵦᵢ

ᵢᵧᵥᵧᵲᵟᵪ

6

000.0MHZ ᵦᵢ

 

 

 

 

 

Performs manual tuning.

Performs seek tuning or HOLD non stop seek tuning.

Releasing the key in a few seconds, skips to the nearest station from the current frequency.

Keeping holding the key for a long seconds, performs non stop seek tuning.

AM band

 

 

 

Analog AM

 

 

 

 

 

 

 

 

Analog AM

 

 

 

Digital AM

 

 

 

 

 

FM band

 

 

 

 

Analog FM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Analog FM

 

 

 

Digital FM

 

 

 

 

 

 

 

 

Analog FM

 

 

 

Digital FM-1ch

 

: Main channel

 

 

Digital FM-2ch

 

 

 

 

 

 

Digital FM-3ch

 

 

: Sub channel

 

 

Digital, CD-quality sound. HD Radio Technology enables local radio stations to broadcast a clean digital signal. AM sounds like today’s FM and FM sounds like a CD.

Recalls the preset channel stored to a key from memory.

Stores the current broadcast HOLD frequency to a key.

Stores song information to an iPod.

Refer to Storing song information to an iPod (iTunes Tagging) on page 51

PBy pressingor, you can also switch the preset channels.

PBy pressing and holdorand release, you can also perform seek tuning.

PBy keeping touching and holding or , you can perform non stop seek tuning. Touch again to cancel.

HD Radio stations

HD Radio stations offer high quality audio and data services. HD Radio stations are brought to you by your local FM or AM stations.

HD Radio stations feature the following:

High quality audio

FM multicasting

Data service

Program Service Data: Contributes to the superior user experience of HD Radio Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other relevant data streams.

Adjacent to traditional main stations are extra local FM channels. These HD2/HD3 Channels provide new, original music as well as deep cuts into traditional genre.

iTunes® Tagging provides you the opportunity to discover a wide range of content and the means to “tag” that content for later review and purchase from the iTunes® Store.

20

HD Radio

3 Touch [Radio settings].

The radio settings screen appears.

Visual information related to content being played on your HD Radio receiver, such as Album Art, historical photographs, still art from live broadcasts, among other related content.

Starting procedure

1 Display the “AV source selection” screen.

2 Touch [HD Radio].

The “HD Radio” screen appears.

Storing the strongest broadcast frequencies

The BSM (best stations memory) function automatically stores the six strongest broadcast frequencies under the preset tuning keys “1” to “6”.

PStoring broadcast frequencies with BSM may replace those you have already saved.

PPreviously stored broadcast frequencies may remain stored if the number of frequencies stored has not reached the limit.

1 Touch the preset channel list display key.

2 Touch to begin a search.

The six strongest broadcast frequencies will be stored under the preset tuning keys in the order of their signal strength.

Touch [Cancel] to cancel the storage process.

Display the Radio settings screen

1 Display the “System” setting screen.

Tuning into strong frequencies

Local seek tuning allows you to only tune into those radio stations with sufficiently strong signals.

1 Display the Radio settings screen.

Refer to Display the Radio settings screen on page 21

2 Touch [Local].

3 Touch the item.

Off (default):

Turns the seek tuning setting off.

Level1 to Level4:

Sets the level of sensitivity for FM to level1 to level4 (for AM

level 1 or 2).

PThe FM “Level4” (AM “Level2”) setting allows you to receive the only stations with the strongest signals.

Switching the seek mode

You can select the method of seek tuning.

1 Display the Radio settings screen.

Refer to Display the Radio settings screen on page 21

2 Touch [Seek] to select an item.

Seek All (default):

Seeks stations from both analog and digital broadcasting.

Seek HD:

Only seeks stations from digital broadcasting.

Switching the reception mode

You can set whether the tuner automatically switches to the analog broadcast of the same frequency level when reception of a digital broadcast becomes weak.

The default setting is “On”.

1 Display the Radio settings screen.

Refer to Display the Radio settings screen on page 21

2 Touch [Blending] to switch “On” or “Off”.

2 Touch [AV Source Settings].

Disc

Track number indicator

Audio source screen 1

 

 

 

 

 

 

 

 

 

 

CD

6/10

21 48

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ẂTrack 99

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9999’99”

Pause

-9999’99”

*2

Skips files forward

 

 

or backward.

Switches between playback and pause.

Plays files in random order.

This function is available for music CD.

: Does not play tracks in random order.

: Plays all tracks in random order.

Audio source screen 2

CD

6/10

21 48

 

 

ẂTrack 99

Sets a repeat play range.

: Repeats the current disc.

: Repeats the current track.

21

Disc

Hides the touch panel keys.

To display again the keys, touch anywhere on the screen.

Performs frame-by-frame playback.

HOLD Performs slow-motion playback.

Each time you touch it changes the speed in four steps in the following order: 1/16 →1/8 → 1/4 → 1/2

Video source screen 1

DVD

 

6/10 21 48

 

 

 

 

 

 

 

*3

Stop

 

 

 

*4

99

99

 

ᵫᶓᶊᶒᶇᴾᶁᶆ ᵫᵮᵣᵥᵋᵟ

ᵦᶘᴾ ᶀᶇᶒ

 

 

 

 

*5

Full

 

 

01

OFF

 

9999’99”

Pause

-9999’99”

 

 

Performs fast reverse

 

or fast forward.

 

 

Touch again to change play back

 

the speed.

 

 

Stops playback.

Video source screen 2

 

 

 

 

Video source screen 2

 

 

DVD

6/10

21 48

 

 

DVD

6/10

21 48

 

 

 

 

 

 

Stop

 

 

 

 

Stop

 

 

 

 

99

99

 

ᵫᶓᶊᶒᶇᴾᶁᶆ ᵫᵮᵣᵥᵋᵟ

ᵦᶘᴾ ᶀᶇᶒ

99

99

 

ᵫᶓᶊᶒᶇᴾᶁᶆ ᵫᵮᵣᵥᵋᵟ

ᵦᶘᴾ ᶀᶇᶒ

L+R

01

 

 

ᵰᶃᶒᶓᶐᶌ

L+R

01

 

 

ᵰᶃᶒᶓᶐᶌ

 

9999’99”

Pause

-9999’99”

 

 

9999’99”

Pause

-9999’99”

 

*6

Sets a repeat play range.

 

 

: Repeats all files.

Resumes playback (Bookmark).

 

 

: Repeats the current chapter.

This function is available for DVD-Video.

 

 

 

 

You can memorize one point as a

 

 

: Repeats the current title.

 

 

 

 

Bookmark for a disc (up to five discs).

 

 

 

Changes the viewing

To clear the bookmark on the disc,

angle (Multi-angle).

touch and hold this key.

This function is available for DVDs

 

Returns and begins playback from

featuring multi-angle recordings.

 

 

the specified point.

Selects the audio output from

 

 

This function is available for DVD-Video

[L+R], [Left], [Right], [Mix].

 

 

and Video-CDs featuring PBC (playback

 

 

 

 

This function is available for Video-CDs

 

control).

and DVDs recorded with LPCM audio.

 

 

 

 

 

*1

Selects a track from the list.

 

 

 

 

Refer to Selecting files from the file name list on

 

 

 

 

page 23

 

 

 

*2

Switches the media file type.

 

 

 

 

Refer to Switching the media file type on page

 

 

 

 

23

 

 

 

*3

Searches for the part you want to play.

 

 

 

 

Refer to Searching for the part you want to play on

 

 

 

 

page 23

 

 

 

*4

Displays the DVD menu.

 

 

 

 

Refer to Operating the DVD menu on page 23

22

Disc

*5

Switches the subtitle/audio language.

 

 

Refer to Switching the subtitle/audio language on

 

 

page 23

*6

Displays the DVD menu keypad.

 

 

Refer to Operating the DVD menu using touch

panel keys on page 23

PBy pressingor, you can also skip files/chapters forward or backward.

PBy pressing and holdingor, you can also perform fast reverse or fast forward.

PIf a Video-CD with PBC On is being played, appears.

PYou can set the screen size for the video image.

Refer to Common operations on page 51

Starting procedure

You can play a normal music CD, Video-CD or DVD-Video using the built-in drive of this product.

CAUTION

For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.

1 Insert the disc.

The source changes and then playback will start.

Refer to Inserting and ejecting a disc on page 8

P If the disc is already set, select [Disc] as the playing source.

Selecting iles from the ile name list

1 Touch .

2 Touch a track on the list to play back.

Switching the media ile type

When playing a digital media containing a mixture of various media file types you can switch between media file types to play.

1 Touch .

2 Touch the item.

Music:

Switches the media file type to music (compressed audio).

Video:

Switches the media file type to video.

Switches the media file type to CD (audio data (CD-DA)).

Searching for the part you want to play

PFor DVD-Videos, you can select [Title], [Chapter] or [10Key].

PFor Video-CDs, you can select [Track] or [10Key] (PBC only).

1 Touch .

2 Touch the item to select the search function.

3 Touch [0] to [9] to input the desired number.

P To cancel an input number, touch [C].

4Touch to start playback from the number you registered.

Operating the DVD menu

You can operate the DVD menu by touching the menu item on the screen directly.

PThis function may not work properly with some DVD disc content. In that case, use touch panel keys to operate the DVD menu.

1 Touch or .

2 Touch the desired menu item.

Switching the subtitle/audio language

1 Touch or to change the language.

: Changes the subtitle language.

: Changes the audio language.

PYou can also switch the subtitle/audio languages using the “DVD/DivX Setup” menu.

Refer to Setting the top-priority languages on page 48

Operating the DVD menu using touch panel keys

If items on the DVD menu appear, the touch panel keys may overlay them. If so, select an item using those touch panel keys.

1 Touch .

2Touch , , or to select the desired menu item.

3 Touch .

PThe way to display the menu differs depending on the disc.

If you touch , you can operate the DVD menu directly.

 

CD-DA:

23

 

 

Compressed iles

Audio source screen 1 (Example: USB)

 

USB

 

 

6/10

21 48

 

 

*1

 

 

ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ

 

 

 

 

 

 

 

 

 

 

 

*2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Abcdefghi

 

 

 

 

 

 

 

 

 

 

 

*3

 

 

 

 

 

 

 

 

 

 

 

 

Abcdefghi

 

 

 

 

 

 

 

 

 

 

 

 

ABC

R&B

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9999’99”

-9999’99”

*4

Skips files forward

 

or backward.

Switches between playback and pause.

Switches the current music information display.

Plays files in random order.

Hides the touch panel keys.

: Does not play files in random order.

To display again the keys,

touch anywhere on the screen.

 

 

 

: Plays all files within the repeat

Video source screen (Example: Disc)

range in random order.

 

 

Audio source screen 2 (Example: USB)

ROM

6/10 21 48

USB

ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ

6/10 21 48

 

 

 

 

*3

 

 

 

 

Abcdefghi

 

 

Stop

 

Abcdefghi

 

Abcdefghi

Abcdefghi

*5

 

 

 

 

ABC

R&B

Full

01

OFF

 

 

 

9999’99” Pause -9999’99”

DB

 

 

 

Sets a repeat play range.

 

Sets a repeat play range.

 

 

 

 

 

 

 

 

or

 

: Repeats all files.

 

 

 

 

 

 

 

 

 

 

or

 

: Repeats all files.

 

 

 

 

 

 

 

 

 

 

 

 

: Repeats the current folder.

 

 

 

 

 

 

 

 

 

 

 

 

 

: Repeats the current folder.

 

 

: Repeats the current file.

 

 

 

 

 

 

 

 

 

 

: Repeats the current file.

 

 

 

 

 

 

 

 

 

Performs frame-by-frame playback.

 

 

 

 

 

 

 

 

Selects the previous folder

 

 

HOLD Performs slow-motion playback.

 

or the next folder.

 

 

 

 

 

 

Constructs the database for using

Stops playback.

 

 

 

 

 

 

the Music Browse mode.

 

 

 

 

 

This function is available only for USB.

24

Compressed iles

Video source screen (Example: Disc)

Hides the touch panel keys.

Still image screen

 

ROM

6/10 21 48

To display again the keys,

USB

6/10 21 48

 

touch anywhere on the screen.

 

 

 

 

 

 

 

Rotates the displayed

 

 

Stop

 

picture 90° clockwise.

 

 

 

Selects the previous

 

 

Abcdefghi

Abcdefghi

Abcdefghi

Abcdefghi

or next folder.

Full

01 OFF

Trimming

 

 

 

9999’99”

Pause

-9999’99”

Still image screen

 

 

 

*4

Performs fast reverse

USB

6/10

21 48

 

 

*4

Skips files forward

 

 

 

 

 

 

 

 

 

 

 

 

 

 

or fast forward.

 

 

 

*3

 

 

 

or backward.

 

Touch again to change the

 

 

 

 

Switches between

 

 

 

 

 

 

 

playback speed.

 

 

 

 

 

 

 

 

 

 

 

playback and pause.

 

 

Abcdefghi

 

Abcdefghi

 

 

Switches between

 

 

 

 

 

 

 

 

 

 

 

 

 

 

playback and pause.

Trimming

 

 

 

 

 

 

 

 

 

 

 

 

 

*1

Displays the MIXTRAX screen.

 

 

 

 

 

 

 

 

Refer to MIXTRAX on page 40

 

 

*6

 

 

 

*2

Displays the link search screen.

 

 

 

 

 

 

 

This function is available for the USB storage device

 

 

 

 

 

 

 

only.

 

 

 

 

 

 

 

 

 

Refer to Selecting a song from the list related to

 

 

Sets a repeat play range.

 

 

the song currently playing (link search) on page

 

 

: Repeats all files.

 

 

 

26

 

 

 

 

*3

Selects a file from the list.

 

 

 

 

 

 

 

 

: Repeats the current folder.

 

 

Refer to Selecting files from the file name list on

 

 

 

 

page 26

 

 

 

 

 

 

 

 

 

 

 

 

Plays files in random order.

 

P

When you play compressed audio files stored in

 

 

 

 

a USB storage device, you can search for a file

 

 

: Does not play files in random order.

 

 

using Music Browse.

 

 

 

Refer to Selecting a file using Music Browse mode

 

 

 

 

 

 

 

 

 

: Plays all files in the current repeat

 

 

on page 26

 

 

 

 

Switches the media file type.

 

 

 

play range in random order.

*4

 

 

 

 

 

 

 

Refer to Switching the media file type on page

 

 

 

 

 

 

 

 

26

 

25

Compressed iles

*5

Switches the subtitle/audio language.

 

This function is available only for compressed video

files stored on a disc.

Refer to Switching the subtitle/audio language on page 23

*6 Saves the current image as the wallpaper.

Refer to Saving the image as the wallpaper on page 26

You can play compressed audio, compressed video or still image files stored in a disc or a USB storage device.

Refer to Media compatibility chart on page 64

PBy pressingor, you can also skip files forward or backward.

PBy pressing and holdingor, you can perform fast reverse or fast forward.

PBy pressing and holdingoron the still image file, you can search through 10 JPEG files at a time. If the file currently being played is the first or last file in the folder, the search is not performed.

PJPEG images are not displayed in the rear display.

PYou can set the screen size for the video and JPEG images.

Refer to Common operations on page 51

CAUTION

For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.

Starting procedure (for Disc)

1 Insert the disc.

The source changes and then playback will start.

Refer to Inserting and ejecting a disc on page 8

P If the disc is already set, select [Disc] as the playing source.

Starting procedure (for USB)

1 Display the “AV source selection” screen.

2 Plug the USB storage device.

Refer to Plugging and unplugging a USB storage device on page 8

26

3 Touch [USB].

 

PPlay back is performed in order of folder numbers. Folders are skipped if they contain no playable files.

Operations common to all ile types

Selecting iles from the ile name list

You can find files or folders to play back using the file name or folder name list.

1 Touch .

2 Touch a file on the list to play back.

PTouching a folder on the list shows its contents. You can play a file on the list by touching it.

Switching the media ile type

When playing a digital media containing a mixture of various media file types you can switch between media file types to play.

1 Touch .

2 Touch the item.

Music:

Switches the media file type to music (compressed audio).

Video:

Switches the media file type to video.

CD-DA:

Switches the media file type to CD (audio data (CD-DA)).

Photo:

Switches the media file type to still image (JPEG data).

Audio ile operations

Selecting a ile using Music Browse mode

You can select files to play back using the category list if the files contain tag information.

P This function is available for the USB storage device only.

1 Touch DB to create a database.

Music Browse mode will be available after the database has been created.

2 Touch .

3Touch the desired category to display the file list.

4 Touch the item.

Refine the item until the desired song title or file name is displayed on the list.

5 Touch the desired song title or file name to play back.

PIf the selection made with Music Browse has been canceled, you can switch to Music Browse mode again by touching the [Tag] tab on the file/folder list screen and touching the desired track.

Selecting a song from the list related to the song currently playing (link search)

PIf you touch the artwork, the list of songs in the album is displayed.

PThis function is available for the USB storage device only.

1 Switch to Music Browse mode.

Refer to Selecting a file using Music Browse mode on page 26

2Touch song information to open the list of songs.

3 Touch the song to play back.

Still image ile operations

Saving the image as the wallpaper

You can save the currently displayed image in the memory of this product and set it as the wallpaper for the AV screen or the top menu screen.

1 Display an image on the screen.

Refer to Starting procedure (for USB) on page 26

Refer to Operations common to all file types on page 26

2 Touch on the image.

3 Touch the following items.

As AVScreen:

Saves the image as the wallpaper for the AV screen.

As HomeScreen:

Saves the image as the wallpaper for the top menu screen.

As Both:

Saves the image as the wallpaper for both the AV screen and top menu screen.

4 Touch “Yes” to overwrite the image.

Compressed iles

PIf you save the new image, the current wallpaper is overwritten.

Setting the slideshow interval

JPEG files can be viewed as a slideshow on this product. In this setting, the interval between each image can be set.

The default setting is “10sec”.

P This setting is available during playback of the JPEG files.

1 Display the “Video Setup” screen.

2 Touch [Time Per Photo Slide].

3 Touch the item.

The following items are available:

5sec, 10sec, 15sec, Manual.

iPod

Audio source screen 1

*1

 

 

iPod

ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ

6/10 21 48

 

*2

 

 

Abcdefghi

 

*3

Abcdefghi

 

 

 

ABC

Pops

*4

 

 

 

99999/99999

9999’99”

-9999’99”

Skips files forward or backward.

Switches between playback and pause.

Changes the audiobook speed.

1 : Normal playback

2 : Fast playback

1/2 : Slow-motion playback

Plays files in random order.

: Plays randomly songs or videos within the selected list.

: Plays album randomly.

Audio source screen 2

 

iPod

ᵫᵧᵶᵲᵰᵟᵶᴾᵣᵸ 6/10 21 48

 

Abcdefghi

*5

Abcdefghi

 

 

ABC

Pops

99999/99999

x1

Sets a repeat play range.

: Repeats all in the selected list.

: Repeats the current song or video.

27

iPod

Video source screen

iPod

6/10 2148

Abcdefghi

*3

*4

99999/99999

 

Full

9999’99”

-9999’99”

Performs fast reverse or fast forward.

*1

Displays the “MIXTRAX” screen.

 

Refer to MIXTRAX on page 40

*2

Displays the link search screen.

 

Refer to Selecting a song from the list related to

 

the song currently playing (link search) on page

 

28

*3

Selects a song or video from the list.

 

Refer to Selecting song or video sources from the

 

playlist screen on page 28

*4

Switches the control mode to “App Mode”.

 

Refer to Using this product’s iPod function from

 

your iPod on page 28

*5

Switches among the Bluetooth devices when the

devices are connected to this product via Bluetooth. (AVH-X5800BHS) (AVH-X4800BS) (AVH-X3800BHS) (AVH-X2800BS)

Refer to Switching the connected Bluetooth device on page 13

PBy pressing theorbutton, you can also skip files forward or backward.

PBy pressing and hold theorbutton, you can also perform fast reverse or fast forward.

PYou can set the screen size for the video image.

Refer to Common operations on page 51

Connecting your iPod

When connecting an iPod to this product, select the method for connecting your device. Settings are required according to the connected device.

Refer to Setup for iPod / iPhone or smartphone on page 16

PThe available sources vary depending on the selected method for connecting your device.

Refer to Information on the connections and functions for each device on page 17

CAUTION

For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.

Starting procedure

1 Connect your iPod.

Refer to Connecting your iPod on page 28 The source changes and then playback will start.

PWhen connecting an iPhone or iPod touch, quit all applications before connecting the device.

2 Display the “AV source selection” screen.

3 Touch [iPod].

Selecting song or video sources from the playlist screen

You can search for the song or video you want to play from the playlist screen.

1 Touch .

2Touch or to switch the music or video category list.

3 Touch the category.

If you use English as the system language, the alphabet search function is available. Touch the initial search bar to use this function.

4 Touch the title of the list.

If you can not find the desired song or video, try to search again according to the above steps.

5 Start playback of the selected list.

PDepending on the generation or version of the iPod, some functions may not be available.

PYou can play playlists created with the MusicSphere application. The application is available on our website.

Using this product’s iPod function from your iPod

You can control this product’s iPod function from the iPod on “App Mode”. The application screen of the iPod can be displayed on this product, and the music files and video files are played back with this product.

PThis function is not available when using iPod function with an iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, or iPod touch (5th generation).

PWhile this function is in use, the iPod will not turn off even if the ignition key is turned off. Operate the iPod to turn off the power.

1 Touch .

2 Operate the connected iPod to select a video or song and play.

PSome functions are still accessible from this product even if the control mode is set to “App Mode”. However, the operation will depend on your applications.

PTouch to switch the control mode.

Selecting a song from the list related to the song currently playing (link search)

PIf you touch the artwork, the list of songs in the album is displayed.

1Touch song information to open the list of songs.

2 Touch the song to play back.

28

AppRadioOne

Displays the launcher application screen.

Displays the previous screen. AppRadioOne

Abcdefg

Abcdefg

 

Abcdefg

 

Abcdefg

Abcdefg

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6/10 2148

Displays the current source.

Displays the menu screen.

PPress the DISP button to hide the App control side bar. Press the DISP button again to display it again.

P and are not available depending on the type of device.

WARNING

Certain uses of an iPhone or a smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions.

If in doubt as to a particular function, only perform it while the car is parked.

No feature should be used unless it is safe to do so under the driving conditions you are experiencing.

Using AppRadioOne

You can control applications for an iPhone or a smartphone directly from the screen (AppRadioOne).

In AppRadioOne, you can operate applications with finger gestures such as tapping, dragging, scrolling or flicking on the screen of this product.

PThe compatible finger gestures vary depending on the application for an iPhone or a smartphone.

PEven though an application is not compatible with AppRadioOne, depending on the application an image may be displayed. But you can not operate the application.

To use AppRadioOne, install the AppRadio app on the iPhone or smartphone in advance. For details about the AppRadio app, visit the following site:

For U.S.A. http://www.pioneerelectronics.com/AppRadioOne

For Canada http://www.pioneerelectronics.ca/AppRadioOne

PBe sure to read Using app-based connected content before you perform this operation.

Refer to Using app-based connected content on page 67

Pioneer is not liable for any issues that may arise from incorrect or flawed app-based content.

The content and functionality of the supported applications are the responsibility of the App providers.

In AppRadioOne, functionality through the product is limited while driving, with available functions determined by the App providers.

Availability of AppRadioOne functionality is determined by the App provider, and not determined by Pioneer.

AppRadioOne allows access to applications other than those listed (subject to limitations while driving), but the extent to which content can be used is determined by the App providers.

Starting procedure

When connecting an iPhone or smartphone to this product, you must select the method for connecting your device. Settings are required according to the connected device.

Refer to Setup for iPod / iPhone or smartphone on page 16

For iPhone users

1 Connect your iPhone.

Refer to iPhone with Lightning connector on page 55

2 Press .

3 Touch [APPS].

When the application is ready to launch, messages appear on the screen of this product.

4 Use your iPhone to launch the application.

The AppRadio app is launched.

5 Touch [OK].

The AppRadioOne screen (Application menu screen) appears.

For smartphone (Android) users

1 Unlock your smartphone and connect it to this product via USB.

Refer to Android device on page 56

2 Press .

3 Touch [APPS].

The AppRadio app is launched, and the AppRadioOne screen (Application menu screen) appears.

Common operation of all device

PIf you connect your device while an AppRadioOne- compatible application is already running, the application operation screen will appear on this product.

PTouch the desired application icon after the AppRadio app is launched.

PThe desired application is launched, and the application operation screen appears.

PPress to go back to the Top menu screen.

Using the keyboard

When you tap the text input area of an application for iPhone, a keyboard will be displayed on the screen. You can input the desired text directly from this product.

CAUTION

For your safety, the keyboard functionality is only available when the vehicle is stopped and the parking brake is engaged.

PThis function is only available in AppRadioOne on the iPhone.

1 Start up the AppRadioOne.

Refer to Starting procedure on page 29

2 Touch the text input area on the application operation screen.

A keyboard for entering text appears.

P The language of the keyboard can be changed.

Refer to Setting the keyboard language with the application for iPhone on page 42

Using the audio mix function

You can output audio mixing AV source and an application for iPhone or smartphone when the AppRadioOne is used.

PDepending on the application or the AV source, this function may not be available.

1 Start up the AppRadioOne.

29

AppRadioOne

2 Press the Volume (+/–) button.

The audio mix menu will be displayed on the screen.

APP

Vol.15

HDRadioRadio

Vol.12

1

2

1Touch to mute. Touch again to unmute so that the sound is not mixed.

2Adjusts the audio volume.

Each touch of [+] or [] increases or decreases the volume

level.

PThe AV operation screen and the Application screen can be switched by pressing .

Pandora®

Gives a “Thumbs Down” to the playing track and skips to the next track.

Playback screen 1

 

 

 

 

 

 

 

 

 

 

Pandora 6/10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

Pandora

21 48

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Abcdefghi

 

 

 

 

 

 

 

 

*1

3

 

 

Abcdefghi

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

Abcde

 

ABC

 

 

 

5

Pause

 

 

1/2

6

9999’99”-9999’99”

 

 

 

Gives a “Thumbs Up” to the playing track.

Skips tracks forward.

Switches between playback and pause.

Displays the preset station list.

Select an item on the list ("1" to "6") to switch to the preset station.

Playback screen 2

 

 

 

 

 

Pandora 6/10

 

1

 

Pandora

21 48

2

 

 

 

 

 

 

 

 

 

Abcdefghi

3

 

 

 

 

 

 

 

Abcdefghi

 

4

Abcde

ABC

 

5

 

6

2/2

 

*2

Adds information for the track currently playing to bookmarks.

*3

Recalls the preset station stored to a key from memory.

*1

Selects a Pandora station from the list.

 

Refer to Selecting a Pandora station from the list

 

on page 31

*2

Creates a new station.

 

Refer to Adding a station on page 31

*3

Switches among the Bluetooth devices when the

 

devices are connected to this product via Bluetooth.

(AVH-X5800BHS) (AVH-X4800BS) (AVH-X3800BHS) (AVH-X2800BS)

Refer to Switching the connected Bluetooth device on page 13

PBy pressing thebutton, you can skip songs forward.

P and are not available when using a shared station.

PIn this chapter, iPhone and iPod touch will be referred to as “iPhone”.

30

Loading...
+ 186 hidden pages