Pioneer AVH-195DVD, AVH-295BT User Manual

AVH-295BT AVH-195DVD

DVD RDS AV RECEIVER RADIO AV RDS CON DVD DVD PLAYER COM RDS

(B) Português Español English

Owner’s Manual Manual de Instrucciones Manual do proprietário

Contents

Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference.

Important

The screens shown in the examples may differ from actual screens, which may be changed without notice for performance and function improvements.

■Precaution..........................	4
Important safety information.............................	4
To ensure safe driving.......................................	4
When using a display connected to V OUT.......	4
To avoid battery exhaustion..............................	4
Rear view camera.............................................	5
Handling the USB connector............................	5
In case of trouble..............................................	5
Visit our website...............................................	5
Protecting the LCD panel and screen...............	5
Notes on internal memory................................	5
About this manual.............................................	6
■Basic operation..................	6
Checking part names and functions..................	6
Remote control.................................................	6
Inserting/ejecting/connecting media.................	6
On first-time startup..........................................	6
How to use the screens....................................	8
Supported AV source........................................	9
Selecting a source............................................	9
Using the touch panel.......................................	9
■Registration and
connection of Bluetooth
device................................	10
Displaying the “Bluetooth” screen...................	10
Registering your Bluetooth devices................	10
Connecting a registered Bluetooth device
manually....................................................	10
Switching visibility...........................................	10

2

Entering the PIN code for Bluetooth wireless
connection.................................................	10
Displaying the device information...................	10
Clearing the Bluetooth memory......................	10
Updating Bluetooth software...........................	11
Displaying the Bluetooth software version......	11
■Hands-free phoning.........	11
Displaying the Phone menu screen................	11
Making a phone call........................................	11
Receiving a phone call....................................	12
Changing the phone settings..........................	12
Notes for hands-free phoning.........................	12
■Setup for iPod...................	13
iPod compatibility............................................	13
Information on the connections and
functions....................................................	13
■Radio.................................	14
Starting procedure..........................................	14
Searching by PTY information........................	14
Storing the strongest broadcast
frequencies................................................	14
Displaying the “Radio settings” screen............	14
Tuning into strong frequencies........................	14
Setting the FM or AM tuning step....................	14
Setting the alternative frequency search.........	15
Setting the Auto PI search..............................	15
Limiting stations to regional programming......	15
Receiving traffic announcements (TA)............	15
Receiving news announcements....................	15
Receiving alarm broadcasts...........................	15
■Disc...................................	15
Starting procedure..........................................	17
Selecting files from the file name list...............	17
Switching the media file type..........................	17
Searching for the part you want to play...........	17
Operating the DVD menu................................	17
Switching the subtitle/audio language.............	17
■Compressed audio
files....................................	17
Starting procedure (for Disc)...........................	18
Starting procedure (for USB)..........................	18
Selecting files from the file name list...............	18
Switching the media file type..........................	18

■Compressed video
files....................................	18
Starting procedure..........................................	19
Selecting files from the file name list...............	19
■Still image files.................	19
Starting procedure..........................................	20
Selecting files from the file name list...............	20
Switching the media file type..........................	20
Setting the slideshow interval.........................	20
■iPod...................................	20
Connecting your iPod.....................................	21
Starting procedure..........................................	21
Selecting song or video sources from the
playlist screen............................................	21
■Bluetooth audio player....	22
Starting procedure..........................................	22
Selecting files from the file name list...............	22
■AUX source.......................	22
Starting procedure..........................................	22
Setting the video signal...................................	23
■System settings................	23
Displaying the “System” setting screen...........	23
Setting the steering wheel control...................	23
Activating the Bluetooth audio source.............	23
Setting the ever scroll.....................................	23
Setting the rear view camera..........................	23
Setting the camera for Rear View mode..........	24
Selecting the system language.......................	24
Setting the beep sound...................................	24
Adjusting the response positions of the touch
panel (touch panel calibration)...................	24
Setting the dimmer.........................................	24
Adjusting the picture.......................................	25
■Audio adjustments...........	26
Displaying the “Audio” setting screen..............	26
Using fader/balance adjustment.....................	26
Using balance adjustment..............................	26
Adjusting source levels...................................	26
Adjusting loudness.........................................	26
Using the subwoofer output............................	26
Adjusting the subwoofer settings....................	26
Switching the rear speaker output..................	26

Switching the RCA rear output........................	26
Boosting the bass...........................................	27
Setting the high pass filter..............................	27
Using the equaliser.........................................	27
■Theme menu.....................	27
Selecting the theme colour.............................	27
■Setting up the video
player................................	28
Setting the top-priority languages...................	28
Setting the angle icon display.........................	28
Setting parental lock.......................................	28
Setting the DivX Subtitle.................................	29
Displaying your DivX VOD registration
code..........................................................	29
Displaying your DivX VOD deregistration
code..........................................................	29
Automatic playback of DVDs...........................	29
Setting the video signal for the rear view
camera......................................................	29
■Favourite menu................	30
Creating a shortcut.........................................	30
Selecting a shortcut........................................	30
Removing a shortcut.......................................	30
■Common operations........	30
Setting the time and date................................	30
Changing the wide screen mode....................	30
■Other functions................	31
Resetting various settings/Restoring this
product to the default settings....................	31
■Connection.......................	31
Precautions....................................................	31
Precautions before connecting the system.....	31
Before installing this product...........................	32
To prevent damage.........................................	32
Notice for the blue/white lead..........................	32
This product....................................................	32
Power cord.....................................................	33
Speaker leads.................................................	33
Power amp (sold separately)..........................	34
iPod / iPhone..................................................	34
iPod / iPhone with Lightning connector...........	34
iPod / iPhone with 30-pin connector................	34
Camera...........................................................	34

Contents

External video component and the display	.....35
■Installation........................	36
Precautions before installation........................	36
Before installing..............................................	36
Installation notes............................................	36
Installation using the screw holes on the side of
this product................................................	36
Installing the microphone................................	36
Mounting on the sun visor...............................	36
Installation on the steering column.................	37
Adjusting the microphone angle.....................	37
■Appendix...........................	37
Troubleshooting..............................................	37
Error messages..............................................	38
Handling and care of discs.............................	39
Playable discs.................................................	40
Detailed information for playable media..........	40
Copyright and trademark notice......................	42
Bluetooth........................................................	43
WMA..............................................................	43
DivX................................................................	43
AAC................................................................	43
Detailed information regarding connected iPod
devices......................................................	43
Using app-based connected content..............	43
Notice regarding video viewing.......................	44
Notice regarding DVD-Video viewing..............	44
Notice regarding MP3 file usage.....................	44
Using the LCD screen correctly......................	44
Specifications.................................................	44

3

Precaution

CAUTION:

USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION:

THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.

CAUTION

This product is a Class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007, and contains a class 1M laser module. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.

CAUTION—CLASS 1M VISIBLE AND INVISIBLE

LASER RADIATION WHEN OPEN, DO NOT VIEW

DIRECTLY WITH OPTICAL INSTRUMENTS.

Important safety information

WARNING

Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards.

Do not allow this product to come into contact with liquids. Electrical shock could result. Also, damage to the product, smoke, and overheating could result from contact with liquids.

If liquid or foreign matter should get inside this product, park your vehicle in a safe place, turn the ignition switch

	off (ACC OFF) immediately and consult your dealer or the
	nearest authorised Pioneer Service Station. Do not use this
4	product in this condition because doing so may result in a

fire, electric shock, or other failure.

If you notice smoke, a strange noise or odour from this product, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or the nearest authorised Pioneer Service Station. Using this product in this condition may result in permanent damage to the system.

Do not disassemble or modify this product, as there are high-voltage components inside which may cause an electric shock. Be sure to consult your dealer or the nearest authorised Pioneer Service Station for internal

inspection, adjustments or repairs.

Before using this product, be sure to read and fully understand the following safety information:

Do not operate this product, any applications, or the rear view camera option (if purchased) if doing so will divert your attention in any way from the safe operation of your vehicle. Always observe safe driving rules and follow all existing traffic regulations. If you experience difficulty in operating this product or reading the display, park your vehicle in a safe location and apply the handbrake before making the necessary adjustments.

Never set the volume of this product so high that you cannot hear outside traffic and emergency vehicles.

To promote safety, certain functions are disabled unless the vehicle is stopped and/or the handbrake is applied.

Keep this manual handy as a reference for operating procedures and safety information.

Do not install this product where it may (i) obstruct the driver’s vision, (ii) impair the performance of any of the vehicle’s operating systems or safety features, including air bags or hazard lamp buttons or (iii) impair the driver’s ability to safely operate the vehicle.

Please remember to fasten your seat belt at all times while operating your vehicle. If you are ever in an accident, your injuries can be considerably more severe if your seat belt is not properly buckled.

Never use headphones while driving.

CAUTION

This product is evaluated in moderate and tropical climate condition under the Audio, video and similar electronic apparatus - Safety requirements, IEC 60065.

To ensure safe driving

WARNING

LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND MUST BE CONNECTED TO THE POWER

SUPPLY SIDE OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.

Do not take any steps to tamper with or disable the handbrake interlock system which is in place for your protection. Tampering with or disabling the handbrake interlock system could result in serious injury or death.

To avoid the risk of damage and injury and the potential violation of applicable laws, this product is not for use with a video image that is visible to the driver.

In some countries the viewing of video image on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be

obeyed.

If you attempt to watch video image while driving, the warning “Viewing of front seat video source while driving is strictly prohibited.” will appear on the screen. To watch video image on this display, stop the vehicle in a safe place and apply the handbrake. Please keep the brake pedal pushed down before releasing the handbrake.

When using a display connected to V OUT

The video output terminal (V OUT) is for connection of a display to enable passengers in the rear seats to watch video images.

WARNING

NEVER install the rear display in a location that enables the driver to watch video images while driving.

To avoid battery exhaustion

Be sure to run the vehicle engine while using this product. Using this product without running the engine can drain the battery.

WARNING

Do not install this product in a vehicle that does not have an ACC wire or circuitry available.

Precaution

Rear view camera

With an optional rear view camera, you are able to use this product as an aid to keep an eye on trailers, or backing into a tight parking spot.

WARNING

SCREEN IMAGE MAY APPEAR REVERSED.

USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE.

CAUTION

The rear view mode is to use this product as an aid to keep an eye on the trailers, or while backing up. Do not use this function for entertainment purposes.

Handling the USB connector

CAUTION

To prevent data loss and damage to the storage device, never remove it from this product while data is being transferred.

Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using this product.

In case of trouble

Should this product fail to operate properly, contact your dealer or nearest authorised Pioneer Service Station.

In Indonesia http://www.pioneer.co.id/

In Australia http://www.pioneer.com.au/

In Israel http://www.pioneerisrael.co.il/

In Middle East / Africa http://www.pioneer-mea.com/en/

In Latin http://www.pioneer-latin.com/en/about-pioneer.html

In Hong Kong http://www.pioneerhongkong.com.hk/ct/index.php

In Taiwan http://www.pioneer-twn.com.tw/

In Korea http://www.pioneer.co.kr/

We offer the latest information about PIONEER CORPORATION on our website.

Pioneer regularly provides software updates to further improve it’s products. Please check the support section of the Pioneer website for all available software updates.

Protecting the LCD panel and screen

Do not expose the LCD screen to direct sunlight when this product is not used. This may result in LCD screen malfunction due to the resulting high temperatures.

When using a mobile phone, keep the aerial of the mobile phone away from the LCD screen to prevent disruption of the video in the form of spots, coloured stripes, etc.

To protect the LCD screen from damage, be sure to touch the touch panel keys only with your finger and do so gently.

Resetting the microprocessor

CAUTION

Pressing the RESET button resets settings and recorded contents to the factory settings.

Do not perform this operation when a device is connected to this product.

Some of the settings and recorded contents will not be

reset.

The microprocessor must be reset under the following conditions:

Prior to using this product for the first time after installation.

If this product fails to operate properly.

If there appears to be problems with the operation of the system.

If your vehicle position is shown on the map with a significant positioning error.

1Turn the ignition switch OFF.

2Press the RESET button with a pen tip or other

pointed implement.

Checking part names and functions on page 6

Settings and recorded contents are reset to the factory settings.

Visit our website

Visit us at the following site: In Mexico

http://www.pioneer-mexico.com/

In Singapore http://www.pioneer.com.sg/

In Malaysia http://www.pioneer.my/

In Thailand http://pioneer-thailand.com

In Philippines http://www.pioneer.ph/

In Vietnam http://www.pioneer.vn/

Notes on internal memory

Before removing the vehicle battery

Some of the settings and recorded contents will not be reset.

Data subject to erasure

The information is erased by disconnecting the yellow lead from the battery (or removing the battery itself).

Some of the settings and recorded contents will not be reset.

5

Precaution

About this manual

This manual uses diagrams of actual screens to describe operations. However, the screens on some units may not match those shown in this manual depending on the model used.

Meanings of Symbols Used in This

Manual

	000BT	This indicates model name that are supported
		the described operations.
		This indicates to touch an appropriate soft key
		on the touch screen.
	HOLD	This indicates to touch and hold an appropriate
		soft key on the touch screen.
		This indicates that there is a reference or
		supplementary for the key or screen.

Basic operation

Checking part names and functions

7 8 9 1

2

3

4

5

6

1 RESET	Resetting the microprocessor on page 5
button

2Volume (+/–) button

3MUTE Press to switch the mute setting to on or off. button

4	button		Press to switch the display between the top
			menu screen and the current source screen.
5	DISP		Press to turn the display on or off.
	button
6	TRK (		Performs manual seek tuning, fast forwards,
			reverse and track search controls.
	/	)
			Press to answer or end a call.
	button
7	button
8	Disc-		Inserting and ejecting a disc on page 6
	loading
	slot
9	LCD screen

Inserting/ejecting/connecting media

CAUTION

Do not insert anything other than a disc into the disc-loading slot.

Inserting and ejecting a disc

Inserting a disc

1 Insert a disc into the disc-loading slot.

Ejecting a disc

1 Pressbutton to eject a disc.

Plugging and unplugging a USB storage device

pThis product may not achieve optimum performance with some USB storage devices.

pConnection via a USB hub is not possible.

pA USB cable is required for connection.

1Pull out the plug from the USB port of the USB cable.

2Plug a USB storage device into the USB cable.

1

		2
Remote control
The remote control CD-R33 is sold separately.	1	USB cable
For details concerning operations, see the remote control	2	USB storage device
manual.		Check that no data is being accessed before pulling out the
		USB storage device.

On first-time startup

1 Start the engine to boot up the system.

6

Basic operation

After a short pause, the splash screen comes on for a few seconds.

The “Select Program Language” screen appears.

pFrom the second time on, the screen shown will differ depending on the previous conditions.

2Touch the language that you want to use on screen.

3Touch .

The top menu screen appears.

7

Basic operation

How to use the screens

Time and date setting screen

		10	6	2016	21	48
		Month/Date			d/m/y	m/d/y
		Time Format			12hour	24hour
	Top menu screen
Current source	Radio	6/10 21 48

Setting menu screen

System

AV source icons

Phone menu screen

Radio	Disc	iPod	Bluetooth	AUX	Rear View	OFF	Phone Book	3	ABC
			Audio		ON
							abcdefghi
							abcdefghi
							abcdefghi		A
							abcdefghi
							abcdefghi

By pressing the button on any screen you can display the Top menu screen.

8

Basic operation

Supported AV source

You can play or use the following sources with this product.

Radio

CD

ROM (compressed audio files)

DVD-Video

The following sources can be played back or used by connecting an auxiliary device.

USB

iPod

Bluetooth audio (AVH-295BT)

AUX

Selecting a source

Using the touch panel

You can operate this product by touching the keys on the screen directly with your fingers.

pTo protect the LCD screen from damage, be sure to touch the screen only with your finger gently.

Using the common touch panel keys

: Returns to the previous screen.

: Closes the screen.

Operating list screens

Switching the operation panel

1 : Switches the operation panel of AV sources.

This key is not available on all sources.

Source on the Top menu screen

1Press .

2Touch the source icon you want to select. p When you select “OFF”, the AV source is turned off.

Source on the source list

1 Display the source list.

CD	6/10	21 48

Track 99

	Pause
9999’99”	-9999’99”

1 Displays the source list.

2 Touch the source key you want to select. p When you select “OFF”, the AV source is turned off.

1	2
ROOT
abcdefghi
abcdefghi
abcdefghi	3
abcdefghi
abcdefghi

1Touching an item on the list allows you to narrow down the options and proceed to the next operation.

2Appears when all characters are not displayed on the display area.

If you touch the key, the rest are scrolled for display.

3Appears when items cannot be displayed on a single page. Touch or to view any hidden items.

Operating the time bar

1

9999’99” -9999’99”

1 You can change the playback point by dragging the key.

pThis function is not available when the Bluetooth Audio is selected as the AV source.

9

Registration and connection of Bluetooth device

295BT

Displaying the “Bluetooth” screen

1Press .

2Touch , and then .

The “Bluetooth” screen appears.

Registering your Bluetooth devices

pIf three devices are already paired, “Memory Full” is displayed. Delete a paired device first.

Deleting a registered device on page 10

1Activate the Bluetooth wireless technology on your devices.

2Display the “Bluetooth” screen.

Displaying the “Bluetooth” screen on page 10

3Touch [Connection].

4Touch .

The system searches for Bluetooth devices waiting for a connection and displays them in the list if a device is found.

5 Touch the Bluetooth device name you want to register.

pIf your device supports SSP (Secure Simple Pairing), a sixdigit number appears on the display of this product. Touch [Yes] to pair the device.

pOnce the connection is established, the device name is displayed. Touch the device name to disconnect.

After the device is successfully registered, a Bluetooth connection is established from the system.

pThe Bluetooth connection can be also made by detecting

this product from the Bluetooth device. Before registration, make sure that “Visibility” in the “Bluetooth” menu is set to “On”. For details on a Bluetooth device operations, refer to the operating instructions supplied with the Bluetooth device.

Switching visibility on page 10

Connecting to a Bluetooth device automatically

This function connects the last connected Bluetooth device to this product automatically as soon as the two devices are less than a few metres apart.

1 Display the “Bluetooth” screen.

Displaying the “Bluetooth” screen on page 10

2Touch [Auto Connect] to switch “On” (default) or “Off”.

Deleting a registered device

CAUTION

Never turn this product off while the paired Bluetooth device is being deleted.

1 Display the “Bluetooth” screen.

Displaying the “Bluetooth” screen on page 10

2Touch [Connection].

3Touch .

Connecting a registered Bluetooth device manually

Connect the Bluetooth device manually in the following cases:

Two or more Bluetooth devices are registered, and you want to manually select the device to be used.

You want to reconnect a disconnected Bluetooth device.

Connection cannot be established automatically for some reason.

1Activate the Bluetooth wireless technology on your devices.

2Display the “Bluetooth” screen.

Displaying the “Bluetooth” screen on page 10

3Touch [Connection].

4Touch the name of the device that you want to connect.

Switching visibility

This function sets whether or not to make this product visible to the other device.

1 Display the “Bluetooth” screen.

Displaying the “Bluetooth” screen on page 10

2Touch [Visibility] to switch “On” (default) or “Off”.

Entering the PIN code for Bluetooth wireless connection

To connect your Bluetooth device to this product, you need to enter a PIN code.

You can change the PIN code with this function.

1 Display the “Bluetooth” screen.

Displaying the “Bluetooth” screen on page 10

2Touch [PIN Code Input].

3Touch [0] to [9] to input the pin code (up to 8 -digits).

4Touch .

p The default PIN code is “0000”.

Displaying the device information

1 Display the “Bluetooth” screen.

Displaying the “Bluetooth” screen on page 10

2 Touch [Device Information].

The device name and address of the Bluetooth device and this product are displayed.

Clearing the Bluetooth memory

pThis setting is available only when you stop your vehicle in a safe place and apply the handbrake.

CAUTION

Never turn this product off while the Bluetooth memory is being cleared.

1 Display the “Bluetooth” screen.

Displaying the “Bluetooth” screen on page 10

10

Registration and connection of Bluetooth device

2Touch [Bluetooth Memory Clear].

3Touch [Clear].

The confirmation screen appears.

Updating Bluetooth software

This function is used to update this product with the latest Bluetooth software. For details on Bluetooth software and updating, refer to our website.

pThe source is turned off and the Bluetooth connection is disconnected before the process starts.

pThis setting is available only when you stop your vehicle in a safe place and apply the handbrake.

pYou need to store the version up file to the USB storage device in advance.

CAUTION

Never turn this product off and never disconnect the phone while the software is being updated.

1 Connect the USB storage device stored the version update file to this unit.

Plugging and unplugging a USB storage device on page 6

2 Display the “Bluetooth” screen.

Displaying the “Bluetooth” screen on page 10

3Touch [BT Software Update].

4Touch [Start].

Follow the on-screen instructions to finish updating the Bluetooth software.

Displaying the Bluetooth software version

If this product fails to operate properly, you may need to consult your dealer for repair.

In such cases, perform the following procedure to check the software version on this unit.

1 Display the “Bluetooth” screen.

Displaying the “Bluetooth” screen on page 10

2 Touch [BT Version Info.].

The version of this product’s Bluetooth module appears.

Hands-free phoning

295BT

Bluetooth telephone connected indicator

The device number of the connected device is displayed.

Reception status of the mobile phone

Battery status of the mobile phone

	Phone Book	3	ABC
*1	abcdefghi
*2	abcdefghi
*3	abcdefghi		A
*4	abcdefghi
	abcdefghi

Displaying the Phone menu screen

1Press .

2Touch .

The Phone menu screen appears.

Making a phone call

You can make a phone call in many different ways.

Direct dialling

1Display the “Phone menu” screen.

Displaying the Phone menu screen on page 11

2Touch .

3Touch the number keys to enter the phone number.

4Touch to make a call.

5Touch to end the call.

p You may hear a noise when you hang up the phone.

	Switches to the initial search.
*1	Displays the preset dial screen.
	Using the preset dial lists on page 12
*2	Switches to the phone book list.
	Calling a number in the phone book on page 11
*3	Switches to the missed, received and dialled call lists.
	Dialling from the history on page 11
*4	Switches the mode to enter the phone number
	directly.

Direct dialling on page 11

CAUTION

For your safety, avoid talking on the phone as much as possible while driving.

To use this function you need to connect your mobile phone to this product via Bluetooth in advance.

Registration and connection of Bluetooth device on page 10

Calling a number in the phone book

pThe contacts on your phone will be automatically transferred to this product.

p“Visibility” of the “Bluetooth” screen should be on.

Switching visibility on page 10

1Display the “Phone menu” screen.

Displaying the Phone menu screen on page 11

2Touch .

3Touch the desired name on the list.

4Touch the phone number you want to dial.

The dial screen appears and dialling starts.

5Touch to end the call.

Dialling from the history

1 Display the “Phone menu” screen.

Displaying the Phone menu screen on page 11

11

Hands-free phoning

2Touch .

3Touch the item to switch the history list.

The following items are available:: Received call list

: Dialled call list: Missed call list

4Touch the desired entry on the list to make a

call.

The dial screen appears and dialling starts.

5 Touch to end the call.

Using the preset dial lists

Registering a phone number

You can easily store up to six phone numbers per device as presets.

1Display the “Phone menu” screen.

Displaying the Phone menu screen on page 11

2Touch or .

On the “Phone Book” screen, touch the desired name.

3 Touch .

Dialling from the preset dial list

1Display the “Phone menu” screen.

Displaying the Phone menu screen on page 11

2Touch .

3Touch the desired item you want to dial.

The dial screen appears and dialling starts.

Receiving a phone call

1Touch to answer the call.

If you touch while getting a call waiting, you can switch to the talking person.

Touch to reject the call.

2Touch to end the call.

Changing the phone settings

Answering a call automatically

1 Display the “Bluetooth” screen.

Displaying the “Bluetooth” screen on page 10

2Touch [Auto Answer] to switch “On” or “Off” (default).

Switching the ring tone

You can select whether or not to use this product’s ring tone.

1 Display the “Bluetooth” screen.

Displaying the “Bluetooth” screen on page 10

2Touch [Ring Tone] to switch “On” (default) or “Off”.

Inverting names in the phone book

1 Display the “Bluetooth” screen.

Displaying the “Bluetooth” screen on page 10

2 Touch [Invert Name].

Setting the private mode

During a conversation, you can switch to private mode (talk directly on your mobile phone).

1Touch or to turn private mode on or off.

Adjusting the other party’s listening volume

This product can be adjusted to the other party’s listening volume.

1 Touch to switch between the three volume levels.

p Settings can be stored for each device.

Notes for hands-free phoning

General notes

Connection to all mobile phones featuring Bluetooth wireless technology is not guaranteed.

The line-of-sight distance between this product and your mobile phone must be 10 metres or less when sending and receiving voice and data via Bluetooth technology.

With some mobile phones, the ring sound may not be output from the speakers.

If private mode is selected on the mobile phone, hands-free phoning may be disabled.

Registration and connection

Mobile phone operations vary depending on the type of mobile phone. Refer to the instruction manual that came with your mobile phone for detailed instructions.

When phone book transfer does not work, disconnect your phone and then perform pairing again from your phone to this product.

Making and receiving calls

You may hear a noise in the following situations:

—When you answer the phone using the button on the phone.

—When the person on the other end of the line hangs up the phone.

If the person on the other end of the line cannot hear the conversation due to an echo, decrease the volume level for hands-free phoning.

With some mobile phones, even after you press the accept button on the mobile phone when a call comes in, handsfree phoning may not be performed.

The registered name will appear if the phone number is already registered in the phone book. When one phone number is registered under different names, only the phone number will be displayed.

The received call and the dialled number histories

You cannot make a call to the entry of an unknown user (no phone number) in the received call history.

If calls are made by operating your mobile phone, no history data will be recorded in this product.

Phone book transfers

If there are more than 1 000 phone book entries on your mobile phone, not all entries may download completely.

Depending on the phone, this product may not display the phone book correctly.

If the phone book in the phone contains image data, the phone book may not be transferred correctly.

12

Hands-free

phoning

Depending on the mobile phone, phone book transfer may not be available.

Setup for iPod

When using an iPod with this product, configure the settings of this product according to the device to be connected.

iPod compatibility

This product supports only the following iPod models and iPod software versions. Others may not work correctly.

iPhone 4, 4s, 5, 5c, 5s, 6, 6 Plus, 6s, 6s Plus: iOS 7.0 or later.

iPhone 3GS: iOS 6.0.1

iPod touch (4th, 5th generation): iOS 6.0.1

iPod touch (3rd generation): iOS 5.1.1

iPod touch (2nd generation): iOS 4.2.1

iPod classic 160GB (2009): Ver. 2.0.4

iPod classic 160GB (2008): Ver. 2.0.1

iPod classic 80GB: Ver. 1.1.2

iPod nano (7th generation)

iPod nano (6th generation): Ver. 1.2

iPod nano (5th generation): Ver. 1.0.2

iPod nano (4th generation): Ver. 1.0.4

iPod nano (3rd generation): Ver. 1.1.3

pYou can connect and control an iPod compatible with this product by using separately sold connector cables.

pOperation methods may vary depending on the iPod model and the software version.

pDepending on the software version of the iPod, it may not be compatible with this product.

For details about iPod compatibility with this product, refer to the information on our website.

This manual applies to the following iPod models. iPod with 30-pin connector

iPhone 3GS, 4, 4s

iPod touch 2nd, 3rd, 4th generation

iPod classic 80GB, 160GB

iPod nano 3rd, 4th, 5th, 6th generation iPod with Lightning connector

iPhone 6s, 6s Plus

iPhone 6, 6 Plus

iPhone 5, 5s, 5c

iPod touch 5th generation

iPod nano 7th generation

iPod / iPhone with a 30-pin connector

When connecting via CD-IU201V (sold separately)

Available sources iPod (audio)

iPod (video)

iPod / iPhone with a Lightning connector

When connecting via CD-IU52 (sold separately)

Available sources iPod (audio)

Information on the connections and functions

The settings and cables required for connecting each device, and the available sources are as follows.

13

Radio

Displays the preset channel list.

Select an item on the list ("1" to "6") to switch to the preset channel.

Selects the FM1, FM2, FM3 or AM band.

	1	FM1 AM	6/10 21 48
	2Radio
	3	Abcdefghi
	4	Abcdefghi
		Abcdefghi
	5
		000.00MHz
	6

Performs manual tuning.

HOLD Performs seek tuning or non stop seek tuning.

Releasing the key in a few seconds, skips to the nearest station from the current frequency. If you touch again while the system is searching, cancels seek tuning and performs manual tuning.

Keeping holding the key for a long seconds, performs non stop seek tuning.

Recalls the preset channel stored to a key from memory.

HOLD Stores the current broadcast frequency to a key.

Searches for a broadcast by PTY information.

Searching by PTY information on page 14

pBy pressingor, you can also switch the preset channels.

pBy pressing and holdorand release, you can also perform seek tuning.

14

pBy keeping pressing and holdingor, you can perform non stop seek tuning. If you press again, non stop seek tuning is cancelled and the preset channel is switched.

Starting procedure

1Press .

2Touch [Radio].

The “Radio” screen appears.

Searching by PTY information

You can tune into a station using PTY (Programme Type Identification) information.

1Touch .

2Touch or to select the item.

The following items are available:

News&Info (default), Popular, Classics, Others.

3Touch to start searching.

If you touch [Cancel], the searching process is cancelled.

Storing the strongest broadcast frequencies

The BSM (best stations memory) function automatically stores the six strongest broadcast frequencies under the preset tuning keys “1” to “6”.

pStoring broadcast frequencies with BSM may replace those you have already saved.

pPreviously stored broadcast frequencies may remain stored if the number of frequencies stored has not reached the limit.

1Touch .

2Touch to begin a search.

While the message is displayed, the six strongest broadcast frequencies will be stored under the preset tuning keys in order of their signal strength.

If you touch [Cancel], the storage process is cancelled.

Displaying the “Radio settings” screen

1Press .

2Touch , and then .

3Touch [AV Source Settings].

4Touch [Radio settings].

Tuning into strong frequencies

pYou can use this function when “Radio” is selected as the source.

Local seek tuning allows you to only tune into those radio stations with sufficiently strong signals.

1Display the “Radio settings” screen.

Displaying the “Radio settings” screen on page 14

2Touch [Local].

3Touch the item you want to set.

Off (default):

Turns the seek tuning setting off.

Level1 to Level4:

Sets the level of sensitivity for FM to Level1 to Level4 (for AM Level1 or Level2).

pThe FM “Level4” (AM “Level2”) setting allows reception of only stations with the strongest signals.

Setting the FM or AM tuning step

You can switch the tuning step for FM or AM band.

pFor FM band, the seek tuning step is fixed to 50 kHz.

pThe tuning step remains at 50 kHz during manual tuning.

1Turn the source off.

Selecting a source on page 9

2Display the “Radio settings” screen.

Displaying the “Radio settings” screen on page 14

3Touch [FM Step] or [AM Step] to switch the

tuning step.

The following items are available for each setting:

FM Step

100kHz(default)

50kHz

AM Step

Radio

9kHz (default)

10kHz

Setting the alternative frequency search

When the tuner cannot get a good reception, tunes to another broadcast station that supports the same programme in the current network.

1Display the “Radio settings” screen.

Displaying the “Radio settings” screen on page 14

2Touch [Alternative FREQ] to switch “On” or “Off” (default).

1Display the “Radio settings” screen.

Displaying the “Radio settings” screen on page 14

2Touch [TA Interrupt] to switch “On” or “Off” (default).

Receiving news announcements

The news can be received from the last selected frequency, interrupting the other sources.

1Display the “Radio settings” screen.

Displaying the “Radio settings” screen on page 14

2Touch [News Interrupt] to switch “On” or “Off” (default).

Setting the Auto PI search

When you switch to the broadcast station containing RDS data, searches for the same PI (Programme Identification) code broadcast station from all frequency band automatically.

1Turn the source off.

Selecting a source on page 9

2Display the “Radio settings” screen.

Displaying the “Radio settings” screen on page 14

3Touch [Auto PI] to switch “On” or “Off”

(default).

pEven if you set to “Off”, the PI search is automatically performed when the tuner cannot get a good reception.

Limiting stations to regional programming

You can switch whether the area code is checked during the auto PI search.

1Display the “Radio settings” screen.

Displaying the “Radio settings” screen on page 14

2Touch [Regional] to switch “On” (default) or “Off”.

Receiving traffic announcements (TA)

The traffic announcement can be received from the last selected frequency, interrupting the other sources.

Receiving alarm broadcasts

The alarm broadcast can be received from the last selected frequency, interrupting the other sources.

1Display the “Radio settings” screen.

Displaying the “Radio settings” screen on page 14

2Touch [Alarm Interrupt] to switch “On” (default) or “Off”.

Disc

Track number indicator

Audio source screen 1
	CD		6/10		21 48
									*1
	Track 99

	Pause
9999’99”	-9999’99”

*2	Skips les forward
	or backward.

Switches between playback and pause.

Plays les in random order.

This function is available for music CD.

: Does not play tracks in random order. : Plays all tracks in random order.

Audio source screen 2
		CD			6/10	21 48
		Track 99

Sets a repeat play range.

: Repeats the current disc.

: Repeats the current track.

15

Disc

Hides the touch panel keys.

To display again the keys, touch anywhere on the screen.

Performs frame-by-frame playback.

HOLD Performs slow-motion playback.

Each time you touch it changes the speed in four steps in the following order: 1/16 →1/8 → 1/4 → 1/2

Video source screen 1

DVD		6/10 21 48
				*3
Stop				*4
99	99	ᵫᶓᶊᶒᶇᴾᶁᶆ ᵫᵮᵣᵥᵋᵟ	ᵒᵖᶉᵦᶘᴾᵏᵔᶀᶇᶒ	*5
Full		01	OFF	ᵏᵍᵐ
		Pause
	9999’99”	-9999’99”

Performs fast reverse or fast forward.

Touch again to change the playback speed.

Stops playback.

16

Video source screen 2			Video source screen 2
DVD	6/10	21 48	DVD	6/10	21 48

Stop

Stop

99

99

ᵫᶓᶊᶒᶇᴾᶁᶆ

ᵫᵮᵣᵥᵋᵟ

ᵒᵖᶉᵦᶘᴾᵏᵔᶀᶇᶒ

99

99

ᵫᶓᶊᶒᶇᴾᶁᶆ

ᵫᵮᵣᵥᵋᵟ

ᵒᵖᶉᵦᶘᴾᵏᵔᶀᶇᶒ

L+R

01

ᵰᶃᶒᶓᶐᶌ

ᵐᵍᵐ

L+R

01

ᵰᶃᶒᶓᶐᶌ

ᵐᵍᵐ

Pause

Pause

9999’99”

-9999’99”

9999’99”

-9999’99”

	Sets a repeat play range.				Resumes playback (Bookmark).
			: Repeats all les.
					This function is available for DVD-Video.
			: Repeats the current chapter.		You can memorise one point as a
					Bookmark for a disc (up to five discs).
			: Repeats the current title.
					To clear the bookmark on the disc,
	Changes the viewing				touch and hold this key.
	angle (Multi-angle).					Returns and begins playback from
	This function is available for DVDs
						the specified point.
	featuring multi-angle recordings.
						This function is available for DVD-Video
Selects the audio output from
						and Video-CDs featuring PBC (playback
[L+R], [Left], [Right], [Mix].						control).
This function is available for Video-CDs
and DVDs recorded with LPCM audio.					*1	Selects a track from the list.
						Selecting files from the file name list on page 17
					*2	Switches the media file type.
						Switching the media file type on page 17
					*3	Searches for the part you want to play.
						Switching the media file type on page 17
					*4	Displays the DVD menu.
						Operating the DVD menu on page 17
					*5	Switches the subtitle/audio language.
						Switching the subtitle/audio language on page
						17

p	By pressing	or	, you can also skip files/chapters
	forwards or backwards.		or	, you can also perform
p	By pressing and holding
	fast reverse or fast forwards.					appears.
p	If a Video-CD with PBC On is being played,

Disc

p Changing the wide screen mode.

Common operations on page 30

You can play a normal music CD, Video-CD or DVD-Video using the built-in drive of this product.

CAUTION

For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the handbrake.

Starting procedure

1Press .

2Insert the disc you want to play.

The source changes and then playback will start.

Inserting and ejecting a disc on page 6

p If the disc is already set, select [Disc] as the playing source.

Selecting files from the file name list

1Touch .

2Touch a track on the list to play back.

Switching the media file type

3Touch [0] to [9] to input the desired number. p To cancel an input number, touch [C].

4Touch to start playback from the number you registered.

Operating the DVD menu

You can operate the DVD menu by touching the menu item on the screen directly.

pThis function may not work properly with some DVD disc content. In that case, use touch panel keys to operate the DVD menu.

1Touch or .

2Touch the desired menu item.

Switching the subtitle/audio language

1 Touch or to change the language.

: Changes the subtitle language.

: Changes the audio language.

You can also switch the subtitle/audio languages

using the “DVD/DivX Setup” menu.

Setting the top-priority languages on page 28

When playing a digital media containing a mixture of various media file types you can switch between media file types to play.

1Touch .

2Touch the item you want to set.

Music:

Switches the media file type to music (compressed audio).

Video:

Switches the media file type to video.

CD-DA:

Switches the media file type to CD (audio data (CD-DA)).

Searching for the part you want to play

pFor DVD-Videos, you can select [Title], [Chapter] or [10Key].

pFor Video-CDs, you can select [Track] or [10Key] (PBC only).

1Touch .

2Touch the item to select the search function.

Compressed audio files

Displays the artwork when the file with the artwork is being played.

The artwork file type needs to be JPEG, and the file size should be less than 99 KB.

Playback screen 1 (Example: USB)

USB 6/10 2148

Abcdefghi

Abcdefghi				*1
ABC

9999’99”

-9999’99”

*2	Skips files forward
	or backward.

Switches between playback and pause.

Switches the current music information display.

17

Compressed audio files

Plays files in random order.

: Does not play files in random order.

: Plays all files within the repeat range in random order.

Playback screen 2 (Example: USB)

AbcdefghiUSB		6/10	21 48
	Abcdefghi
	ABC

Starting procedure (for Disc)

1Press .

2Insert the disc you want to play.

The source changes and then playback will start.

Inserting and ejecting a disc on page 6

p If the disc is already set, select [Disc] as the playing source.

Starting procedure (for USB)

1Press .

2Plug the USB storage device.

Plugging and unplugging a USB storage device on page 6

3 Touch [USB].

pPlay back is performed in order of folder numbers. Folders are skipped if they contain no playable files.

Sets a repeat play range.

or		: Repeats all files.
: Repeats the current folder.
: Repeats the current file.

	Selects the previous folder
	or the next folder.
*1	Selects a file from the list.
	Selecting files from the file name list on page 18
*2	Switches the media file type.
	Switching the media file type on page 18

pBy pressingor, you can also skip files forwards or backwards.

pBy pressing and holdingor, you can perform fast reverse or fast forwards.

You can play compressed audio files stored in a disc or a USB storage device.

Media compatibility chart on page 41

Selecting files from the file name list

You can find files or folders to play back using the file name or folder name list.

1Touch .

2Touch a file on the list to play back. p Files are played back in file number order.

Switching the media file type

When playing a digital media containing a mixture of various media file types you can switch between media file types to play.

1Touch .

2Touch the item you want to set.

Music:

Switches the media file type to music (compressed audio).

Video:

Switches the media file type to video.

CD-DA:

Switches the media file type to CD (audio data (CD-DA)).

Photo:

Switches the media file type to still image (JPEG or BMP data).

Compressed video files

Hides the touch panel keys.

To display again the keys, touch anywhere on the screen.

(Example: Disc)

ROM 6/10 2148

*1

Stop

Abcdefghi	Abcdefghi		*2
Full		01	OFF
9999’99”	Pause	-9999’99”

Sets a repeat play range.

or : Repeats all les.

: Repeats the current folder.

: Repeats the current le.

Performs frame-by-frame playback.

HOLD Performs slow-motion playback.

Stops playback.

18

Compressed video files

Still image files

(Example: Disc)
ROM			6/10 21 48
Stop
Abcdefghi			Abcdefghi

Full		01	OFF
9999’99”	Pause	-9999’99”

*3	Performs fast reverse
	or fast forward.

Touch again to change the playback speed.

Switches between playback and pause.

Starting procedure

Compressed audio files on page 17

Selecting files from the file name list

You can select files to view using the file name list.

1Touch .

2Touch a file on the list to play back.

pFiles are played back in file number order and folders are skipped when they contain no files.

Touch the playback sign of the thumbnail to preview the file.

Hides the touch panel keys.

To display again the keys, touch anywhere on the screen.

Rotates the displayed picture 90° clockwise.

Selects the previous or next folder.

USB 6/10 2148

*1

Abcdefghi Abcdefghi

Full

*1	Selects a file from the list.
	Selecting files from the file name list on page 19
*2	Switches the subtitle/audio language.
	Switching the subtitle/audio language on page
	17
*3	Switches the media file type.
	Switching the media file type on page 18

pBy pressingor, you can also skip files forwards or backwards.

pBy pressing and holdingor, you can perform fast reverse or fast forwards.

pChanging the wide screen mode.

Common operations on page 30

You can play compressed video files stored on a disc or in an USB storage device.

Media compatibility chart on page 41

CAUTION

For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the handbrake.

Sets a repeat play range.

: Repeats all les.

: Repeats the current folder.

Plays les in random order.

: Does not play les in random order.

: Plays all les in the current repeat play range in random order.

19

Still image files

USB 6/10 2148

Abcdefghi Abcdefghi

Full

	*2	Skips les forward
		or backward.
	Switches between
	playback and pause.
*1	Selects a file from the list.
	Selecting files from the file name list on page 20
*2	Switches the media file type.
	Switching the media file type on page 20

pBy pressing or , you can also skip files forwards or backwards.

pBy pressing and holding or , you can search 10 files at a time. If the file currently being played is the first or last file in the folder, the search is not performed.

pChanging the wide screen mode.

Common operations on page 30

You can view still images stored in an USB storage device.

Media compatibility chart on page 41

Starting procedure

1Press .

2Plug the USB storage device.

Plugging and unplugging a USB storage device on page 6

pPlayback is performed in order of folder numbers. Folders are skipped if they contain no playable files.

3 Touch [USB].

The image is displayed on the screen.

Selecting files from the file name list

You can select files to view using the file name list.

1Touch .

2Touch a file on the list to play back.

pTouching a folder on the list shows its contents. You can play a file on the list by touching it.

Switching the media file type

When playing a digital media containing a mixture of various media file types you can switch between media file types to play.

1Touch .

2Touch the item you want to set.

Music:

Switches the media file type to music (compressed audio).

Video:

Switches the media file type to video.

Photo:

Switches the media file type to still image (JPEG data).

Setting the slideshow interval

JPEG or BMP files can be viewed as a slideshow on this product. In this setting, the interval between each image can be set.

pThis setting is available during playback of the JPEG or BMP files.

1Display the “Video Setup” screen.

2Touch [Time Per Photo Slide].

3Touch the item you want to set.

The following items are available:

“10sec” (default), “5sec”, “15sec”, “Manual”.

iPod

Audio source screen 1

iPod 6/10 2148

Abcdefghi

Abcdefghi

ABC

99999/99999

9999’99”

-9999’99”

Skips files forward or backward.

Switches between playback and pause.

20

iPod

Sets a shuffle play.

: Plays randomly songs or videos within the selected list.

: Plays album randomly.

Audio source screen 2

iPod	6/10	21 48
Abcdefghi

Abcdefghi

ABC

99999/99999

x1

Sets a repeat play range.

: Repeats all in the selected list.

: Repeats the current song or video.

Changes the audiobook speed.

1 : Normal playback

2 : Fast playback

1/2 : Slow-motion playback

Video source screen

iPod 6/10 2148

Abcdefghi

99999/99999

Full

9999’99”

-9999’99”

Performs fast reverse or fast forward.

Selects a track from the list.

Selecting song or video sources from the playlist screen on page 21

pBy pressing theorbutton, you can also skip files forwards or backwards.

pBy pressing and hold theorbutton, you can also perform fast reverse or fast forwards.

pChanging the wide screen mode.

Common operations on page 30

Connecting your iPod

For iPod with a 30-pin connector users

Via USB cable

pDepending on your iPod, a USB interface cable for iPod / iPhone (CD-IU201V) (sold separately), is required to connect.

iPod audio and/or video sources are enabled if either of the cables is connected.

iPod / iPhone with 30-pin connector on page 34

For iPod / iPhone with a Lightning connector users

Via USB cable

pWith a USB interface cable for iPod/iPhone (CD-IU52) (sold separately), iPod audio source is available.

However, functions related to iPod video files are not available.

iPod / iPhone with Lightning connector on page 34

CAUTION

and apply the handbrake.

Starting procedure

1 Connect your iPod.

Connecting your iPod on page 21

The source changes and then playback will start.

pIf connecting an iPhone or iPod touch, quit applications before.

2Press .

3Touch [iPod].

Selecting song or video sources from the playlist screen

You can search for the song or video you want to play from the playlist screen.

1Touch .

2Touch or to switch the music or video category list.

3Touch the category you want to search for.

4Touch the title of the list that you want to play.

If you can not find the desired song or video, try to search again according to the above steps.

5Start playback of the selected list.

pDepending on the generation or version of the iPod, some functions may not be available.

pYou can play playlists created with the MusicSphere application. The application is available on our website.

pUp to 1 000 items can be displayed in the list.

For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place	21

Bluetooth audio player

295BT

Playback screen 1

Bluetooth6/10 2148

Abcdefghi

Abcdefghi

ABC

	9999
9999’99”	-9999’99”

Skips files forward or backward.

You cannot use this function while the audio is played back.

Track number indicator

Plays files in random order. Playback screen 2

Bluetooth6/10 2148

Abcdefghi

Abcdefghi

ABC

9999

Sets a repeat play range.

Switches between playback and pause.

pBy pressing theorbutton, you can also skip files forwards or backwards.

pBy pressing and hold theorbutton, you can also perform fast reverse or fast forwards.

pBefore using the Bluetooth audio player, register and connect the device to this product.

Registering your Bluetooth devices on page 10

pDepending on the Bluetooth device connected to this product, the available operations with this product may be limited or differ from the descriptions in this manual.

pWhile you are listening to songs on your Bluetooth device, please refrain from operating the phone function as much as possible. If you try operating, the signal may cause noise for song playback.

pWhen you are talking on the Bluetooth device connected to this product via Bluetooth, it may pause playback.

Starting procedure

1Display the “System” setting screen.

2Touch [AV Source Settings].

3Confirm that “Bluetooth Audio” is turned on.

4Press .

5Touch [Bluetooth Audio].

Selecting files from the file name list

pThis function may not be available depending on some Bluetooth device.

1Touch .

2Touch a file or a folder on the list to play back.

Selects a file from the list.

Selecting files from the file name list on page 22

AUX source

Hides the touch panel keys.

To display again the keys, touch anywhere on the screen.

AUX	6/10	21 48

Full

Switches between the screen to operate video les and that to operate music les.

p is only available when there are both audio and video files on the auxiliary equipment.

pA Mini-jack AV cable (CD-RM10) (sold separately) is required for connection.

External video component and the display on page 35

CAUTION

For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the handbrake.

Starting procedure

You can display the video image output by the device connected to video input.

1Display the “System” setting screen.

2Confirm that “AUX Input” is turned on.

3Press .

4Touch [AUX].

22

AUX source

The image is displayed on the screen.

Setting the video signal

When you connect this product to an AUX equipment, select the suitable video signal setting.

pYou can operate this function only for the video signal input into the AUX input.

1Display the “Video Setup” screen.

2Touch [Video Signal Setting].

3Touch [AUX].

4Touch the item you want to set.

The following items are available:

Auto (default), PAL, NTSC, PAL-M, PAL-N, SECAM.

System settings

Displaying the “System” setting screen

1Press .

2Touch , and then .

The “System” setting screen appears.

Setting the steering wheel control

You can set the steering wheel control on the display via a wired remote cable.

Power cord on page 33

pThis setting is available only when you stop your vehicle in a safe place and apply the handbrake.

pThis setting is available when turn all the sources off.

This setting is required for using the steering wheel remote control function.

pYou can set a function key to more than one steering wheel key.

pYou can set only one function key to a steering wheel key.

pIf you make a mistake after connecting this product with the supplied wired remote cable, please reset it.

pIf this function does not work correctly, contact your dealer or an authorised Pioneer Service Station.

pWhen you start to set, all the default key settings is automatically cleared.

For steering wheel control adapter for Pioneer users

2Touch [Steering Wheel Control].

3Touch [No Adapter].

4Touch the item to select the brand of your vehicle.

5Touch the item to set.

Follow the on-screen instructions to register the function setting.

If you touch [Clear], all the settings is cleared.

Activating the Bluetooth audio source

295BT

1 Display the “System” setting screen.

Displaying the “System” setting screen on page 23

2Touch [AV Source Settings].

3Touch [Bluetooth Audio] to switch “On” (default) or “Off”.

Setting the ever scroll

When “Ever Scroll” is set to “On”, the recorded text information scrolls continuously in the display while the vehicle is stopped.

1 Display the “System” setting screen.

Displaying the “System” setting screen on page 23

2Touch [Ever Scroll] to switch “On” or “Off” (default).

1 Display the “System” setting screen.

Displaying the “System” setting screen on page 23

2Touch [Steering Wheel Control].

3Touch [With Adapter].

4Touch [OK].

Registering function to each key manually

1 Display the “System” setting screen.

Displaying the “System” setting screen on page 23

Setting the rear view camera

A separately sold rear view camera (e.g. ND-BC8) is required for utilising the rear view camera function. (For details, consult your dealer.)

Rear view camera

This product features a function that automatically switches to the full-screen image of the rear view camera installed on your vehicle, when the gearstick is in the REVERSE (R) position.

Camera for Rear View mode

Rear View can be displayed at all times. Please note that with this setting, the camera image is not resized to fit, and that a portion of what is seen by the camera is not viewable.

23

System settings

CAUTION

Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen image may appear reversed.

pImmediately verify whether the display changes to a rear view camera image when the gearstick is moved to REVERSE (R) from another position.

pWhen the screen changes to full-screen rear view camera image during normal driving, switch to the opposite setting in “Camera Polarity”.

pIf you touch while the camera image is displayed, the displayed image will turn off temporarily.

Setting rear view camera activation

1 Display the “System” setting screen.

Displaying the “System” setting screen on page 23

2Touch [Camera settings].

3Touch [Back Camera Input] to switch “On” or “Off” (default).

Setting the polarity of the rear view camera

pThis function is available when “Back Camera Input” is “On”.

Setting rear view camera activation on page 24

1 Display the “System” setting screen.

Displaying the “System” setting screen on page 23

2Touch [Camera settings].

3Touch [Camera Polarity].

Battery (default):

The polarity of the connected lead is positive.

Ground:

The polarity of the connected lead is negative.

Setting the camera for Rear View mode

To display “Rear View” at all times, “Rear View” needs to be set to “On”.

1 Press .

24

2 Touch [Rear View] to switch “On” or “Off” (default).

If no operations are performed for seven seconds on the AV operation screen, the camera view will appear automatically. p To set the rear view camera for Rear View mode, set “Back

Camera Input” to “On”.

Setting rear view camera activation on page 24

Selecting the system language

If the embedded language and the selected language setting are not the same, text information may not display properly.

Some characters may not be displayed properly.

1 Display the “System” setting screen.

Displaying the “System” setting screen on page 23

2Touch [System Language].

3Touch the language that you want to use.

Setting the beep sound

1 Display the “System” setting screen.

Displaying the “System” setting screen on page 23

2Touch [Beep Tone] to switch “On”(default) or “Off”.

Adjusting the response positions of the touch panel (touch panel calibration)

If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response positions of the touch panel screen.

pThis setting is available only when you stop your vehicle in a safe place and apply the handbrake.

pDo not use sharp pointed tools such as a ballpoint or mechanical pen, which could damage the screen.

pDo not turn off the engine while saving the adjusted position data.

1 Display the “System” setting screen.

Displaying the “System” setting screen on page 23

2Touch [Touch panel calibration].

3Touch [Yes].

4Touch four corners of the screen along the arrows.

5Press .

The adjustment results are saved.

6Press once again.

Proceed to 16-point adjustment.

7Gently touch the centre of the “+” mark dis-

played on the screen.

The target indicates the order.

When you press , the previous adjustment position returns.

When you press and hold , the adjustment is cancelled.

8 Press and hold .

The adjustment results are saved.

Setting the dimmer

Setting the dimmer trigger

pThis setting is available only when you stop your vehicle in a safe place and apply the handbrake.

1 Display the “System” setting screen.

Displaying the “System” setting screen on page 23

2Touch [Dimmer Settings].

3Touch [Dimmer Trigger].

4Touch the item.

Auto (default):

Switches the dimmer to on or off automatically according to your vehicle’s headlight turning on or off.

Manual:

Switches the dimmer to on or off manually.

Time:

Switches the dimmer to on or off at the time you adjusted.

Setting the dimmer duration in day or night

pYou can use this function when “Dimmer Trigger” is set to “Manual”.

pThis setting is available only when you stop your vehicle in a safe place and apply the handbrake.

System settings

1 Display the “System” setting screen.

Displaying the “System” setting screen on page 23

2Touch [Dimmer Settings].

3Touch [Day/Night] to switch the following

items.

Day (default):

Turns the dimmer manually to off.

Night:

Turns the dimmer manually to on.

Setting the dimmer duration optional

You can adjust the time that the dimmer is turned on or off.

pYou can use this function when “Dimmer Trigger” is set to “Time”.

pThis setting is available only when you stop your vehicle in a safe place and apply the handbrake.

1 Display the “System” setting screen.

Displaying the “System” setting screen on page 23

2Touch [Dimmer Settings].

3Touch [Dimmer Duration].

The “Duration Setting” screen appears.

4Touch the time display to activate the adjustment mode.

5Touch the graph to set the dimmer duration.

You can also set the dimmer duration touching or .

Each touch of or moves the cursor backwards or forwards in the 15 minute width.

The default setting is 18:00-6:00 (6:00 PM-6:00 AM).

When the cursors are placed on the same point, the dimmer available time is 0 hours.

When the cursor for off time setting is placed on the left end and the cursor for on time setting is placed on the right end, the dimmer available time is 0 hours.

When the cursor for on time setting is placed on the left end and the cursor for off time setting is

placed on the right end, the dimmer available time is 24 hours.

The time display of the dimmer duration adjusting bar is depending on the clock display setting.

Setting the time and date on page 30

Adjusting the picture

You can adjust the picture for each source and rear view camera.

CAUTION

For safety reasons, you cannot use some of these functions while your vehicle is in motion. To enable these functions, you must stop in a safe place and apply the handbrake. Refer to Important Information for the User (a separate manual).

1Display the screen you wish to adjust.

2Display the “System” setting screen.

Displaying the “System” setting screen on page 23

3Touch [Picture Adjustment].

4Touch the item to select the function to be

adjusted.

Brightness:

Adjusts the black intensity. (–24 to +24)

Contrast:

Adjusts the contrast. (–24 to +24)

colour:

Adjusts the colour saturation. (–24 to +24)

Hue:

Adjusts the tone of colour (which colour is emphasised, red or green). (–24 to +24)

Dimmer:

Adjusts the brightness of the display. (+1 to +48)

With some pictures, you cannot adjust Hue and colour.

When you touch [Rear View], the mode changes to the picture adjustment for rear view. By touching [Source], you can return to the picture adjustment for AV source.

5Touch , , , to adjust.

The adjustments of “Brightness”, “Contrast” and “Dimmer” are stored separately when your vehicle’s headlights are off (daytime) and on (nighttime).

“Brightness” and “Contrast” are switched automatically depending on whether the vehicle’s headlights are on or off.

“Dimmer” can be changed the setting or the time to switch it to on or off.

Setting the dimmer on page 24

The setting contents can be memorised separately.

25

Audio adjustments

Displaying the “Audio” setting screen

1Press .

2Touch , and then .

The “Audio” setting screen appears.

Using fader/balance adjustment

pThis function is available when “Rear Speaker Output” is set to “Full”, and “Preout” is set to “Rear”.

1 Display the “Audio” setting screen.

Displaying the “Audio” setting screen on page 26

2Touch [Fader/Balance].

3Touch or to adjust the front/rear speaker balance.

4Touch or to adjust the left/right speaker

balance.

p“Front15” to “Rear15” is displayed as the front/rear speaker balance moves from the front to rear.

p“Left15” to “Right15” is displayed as the left/right speaker balance moves from the left to right.

pThe default setting is “F/R 0 L/R 0”.

You can also set the fader/balance by touching the point on the displayed table.

Using balance adjustment

pThis function is available when “Rear Speaker Output” and “Preout” are set to “Subwoofer Settings”.

1 Display the “Audio” setting screen.

Displaying the “Audio” setting screen on page 26

2Touch [Balance].

3Touch or to adjust the left/right speaker

balance.

p“Left15” to “Right15” is displayed as the left/right speaker balance moves from the left to right.

pThe default setting is “L/R 0”.

You can also set the fader/balance by dragging the point on the displayed table.

Adjusting source levels

SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources.

pSettings are based on the FM tuner volume level, which remains unchanged.

pThis function is not available when the FM tuner is selected as the AV source.

1Compare the FM tuner volume level with the level of the source you want to adjust.

2Display the “Audio” setting screen.

Displaying the “Audio” setting screen on page 26

3Touch [Source Level Adjuster].

4Touch or to adjust the source volume.

pIf you directly touch the area where the cursor can be moved, the SLA setting will be changed to the value of the touched point.

p“+4” to “–4” is displayed as the source volume is increased or decreased.

pThe default setting is “0”.

Adjusting loudness

This function compensates for deficiencies in the low-frequency and high-frequency ranges at low volume.

pThis function is not available while you make or receive a call using the hands-free function.

1 Display the “Audio” setting screen.

Displaying the “Audio” setting screen on page 26

2Touch [Loudness].

3Touch the item.

The following items are available:

Off (default), Low, Mid, High.

Using the subwoofer output

This product is equipped with a subwoofer output mechanism, which can be turned on or off.

1 Display the “Audio” setting screen.

Displaying the “Audio” setting screen on page 26

2Touch [Subwoofer] to switch “On” (default) or “Off”.

Adjusting the subwoofer settings

p This function is available only when “Subwoofer” is “On”.

Using the subwoofer output on page 26

1 Display the “Audio” setting screen.

Displaying the “Audio” setting screen on page 26

2Touch [Subwoofer Settings].

3Touch or to turn the subwoofer phase to normal or reverse.

4Touch or to adjust the subwoofer level between -24 and 6.

5Touch or to adjust the subwoofer

frequency.

The following items are available:

80Hz(default), 50Hz, 63Hz, 80Hz, 100Hz, 125Hz.

Switching the rear speaker output

1Turn the source off.

2Display the “Audio” setting screen.

Displaying the “Audio” setting screen on page 26

3Touch [Rear Speaker Output].

4Touch to switch “Full” (default) or “Subwoofer”.

When this function is set to “Subwoofer Settings”, “Preout” is fixed to “Subwoofer Settings”.

Switching the RCA rear output

When “Rear Speaker Output” is set to “Subwoofer Settings”, this setting is fixed to “Subwoofer Settings”.

1 Display the “Audio” setting screen.

Displaying the “Audio” setting screen on page 26

2Touch [Preout] to switch “Subwoofer Settings”(default) or “Rear”.

26

Audio adjustments

Boosting the bass

1 Display the “Audio” setting screen.

Displaying the “Audio” setting screen on page 26

2Touch [Bass Booster].

3Touch to select the bass boost level from 0 to

+6.

Setting the high pass filter

Customising the equaliser curves

You can adjust the currently selected equaliser curve setting as desired. Adjustments can be made with a 5-band graphic equaliser.

pIf you make adjustments when a curve “S.Bass”, “Powerful”, “Natural”, “Vocal”, or “Flat” is selected, the equaliser curve settings will be changed to “Custom1” mandatorily.

pIf you make adjustments when the “Custom2” curve is selected for example, the “Custom2” curve will be updated.

p“Custom1” and “Custom2” curves can be created common to all sources.

1 Display the “Audio” setting screen.

Displaying the “Audio” setting screen on page 26

2Touch [High Pass Filter].

3Touch the item.

The following items are available:

Off(default), 50Hz, 63Hz, 80Hz, 100Hz, 125Hz.

Using the equaliser

Recalling equaliser curves

There are seven stored equaliser curves that you can easily recall at any time. Here is a list of the equaliser curves:

S.Bass is a curve in which only low-pitched sound is boosted.

Powerful is a curve in which lowand high-pitched sounds are boosted.

Natural is a curve in which lowand high-pitched sounds are slightly boosted.

Vocal is a curve in which the midrange, which is the human vocal range, is boosted.

Flat is a flat curve in which nothing is boosted.

Custom1 is an adjusted equaliser curve that you create. If you select this curve, the effect is applied to all AV sources.

Custom2 is an adjusted equaliser curve that you create. If you select this curve, the effect is applied to all AV sources.

p The default setting is “Powerful”.

1 Display the “Audio” setting screen.

Displaying the “Audio” setting screen on page 26

2Touch [Graphic EQ].

3Touch the equaliser you want.

1 Display the “Audio” setting screen.

Displaying the “Audio” setting screen on page 26

2Touch [Graphic EQ].

3Select a curve that you want to use as the basis of customising.

4Touch the frequency for which you want to

adjust the level.

pIf you trail a finger across the bars of multiple equaliser bands, the equaliser curve settings will be set to the value of the touched point on each bar.

Theme menu

Selecting the theme colour

A theme colour can be selected from 3 different colours.

1Display the “Theme” screen.

2Touch [Theme].

3Touch the colour you want.

27

Setting up the video player

Setting the top-priority languages

You can assign the top-priority language to the top-priority subtitle, audio and menu in initial playback. If the selected language is recorded on the disc, subtitles, audio and menu are displayed or output in that language.

pThis setting is available when the selected source is “Disc”, “CD”, “Video CD” or “DVD”.

Setting the subtitle language

You can set a desired subtitle language. When available, the subtitles will be displayed in the selected language.

1Display the “Video Setup” screen.

2Touch [DVD/DivX Setup].

3Touch [Subtitle Language].

The pop-up menu appears.

4 Touch the desired language.

When you select “Others”, a language code input screen is shown. Input the four-digit code of the desired language then touch .

If the selected language is not available, the language specified on the disc is displayed.

You can also switch the subtitle language by touching the switch subtitle languages key during playback.

The setting made here will not be affected even if the subtitle language is switched during playback using the switch subtitle languages key.

Setting the audio language

You can set the preferred audio language.

1 Display the “Video Setup” screen.

2Touch [DVD/DivX Setup].

3Touch [Audio Language].

The pop-up menu appears.

4Touch the desired language.

When you select “Others”, a language code input screen is shown. Input the four-digit code of the desired language then touch .

If the selected language is not available, the language specified on the disc is displayed.

You can also switch the audio language by touching the switch audio languages key during playback.

The setting made here will not be affected even if the audio language is switched during playback using the switch audio languages key.

Setting the menu language

You can set the preferred language in which the menus recorded on a disc are displayed.

1Display the “Video Setup” screen.

2Touch [DVD/DivX Setup].

3Touch [Menu Language].

The pop-up menu appears.

4 Touch the desired language.

When you select “Others”, a language code input screen is shown. Input the four-digit code of the desired language then touch .

If the selected language is not available, the language specified on the disc is displayed.

Setting the angle icon display

The angle icon can be set so it appears on scenes where the angle can be switched.

pThis setting is available when the selected source is “Disc”, “CD”, “Video CD” or “DVD”.

1Display the “Video Setup” screen.

2Touch [DVD/DivX Setup].

3Touch [Multi Angle] repeatedly until the

desired setting appears.

On (default): Turns the multi-angle setting on.

Off: Turns the multi-angle setting off.

Setting parental lock

Some DVD-Video discs let you use parental lock to set restrictions so that children cannot watch violent or adult-oriented scenes. You can set the parental lock level in steps as desired.

pWhen you set a parental lock level and then play a disc featuring parental lock, code number input indications may be displayed. In this case, playback will begin when the correct code number is input.

pThis setting is available when the selected source is “Disc”, “CD”, “Video CD” or “DVD”.

Setting the code number and level

When you first use this function, register your code number. If you do not register a code number, the parental lock will not operate.

1Display the “Video Setup” screen.

2Touch [DVD/DivX Setup].

3Touch [Parental].

The “Parental” screen appears.

28

Setting up the video player

4Touch [0] to [9] to input a four-digit code number.

5Touch the following key.

Registers the code number, and you can now set the level.

6 Touch any number between [1] to [8] to select the desired level.

[8]: Enables playback of the entire disc (initial setting).

[7] to [2]: Enables playback of discs for children and nonadult oriented discs.

[1]: Enables only playback of discs for children.

7 Touch the following key.

Sets the parental lock level.

pWe recommend to keep a record of your code number in case you forget it.

pThe parental lock level is recorded on the disc. You can confirm it by looking at the disc package, the included literature or the disc itself. You cannot use parental lock with discs that do not feature a recorded parental lock level.

pWith some discs, parental lock operates to skip certain scenes only, after which normal playback resumes. For details, refer to the disc’s instructions.

Setting the DivX Subtitle

pThis setting is available when the selected source is “Disc” or “USB”.

1Display the “Video Setup” screen.

2Touch [DivX Subtitle] to switch “Original”

(default) or “Custom”.

Displaying your DivX VOD registration code

If you want to play DivX® VOD (video on demand) content on this product, you must first register this product with your DivX VOD content provider. You do this by generating a DivX VOD registration code, which you submit to your provider.

pKeep a record of the code as you will need it when you register this product to the DivX VOD provider.

pThis setting is available when the selected source is “Disc”, “CD”, “Video CD” or “DVD”.

1Display the “Video Setup” screen.

2Touch [DVD/DivX Setup].

3Touch [DivX® VOD].

The “DivX® VOD” screen appears.

pIf a registration code has already been activated, it cannot be displayed.

4 Touch [Registration Code].

Your 10-digit registration code is displayed.

pMake a note of the code as you will need it when you deregister from a DivX VOD provider.

Displaying your DivX VOD deregistration code

A registration code registered with a deregistration code can be deleted.

pThis setting is available when the selected source is “Disc”, “CD”, “Video CD” or “DVD”.

1Display the “Video Setup” screen.

2Touch [DVD/DivX Setup].

3Touch [DivX® VOD].

The “DivX® VOD” screen appears.

4 Touch [Deregistration Code].

Your 8-digit deregistration code is displayed.

pMake a note of the code as you will need it when you deregister from a DivX VOD provider.

Automatic playback of DVDs

When a DVD disc with a DVD menu is inserted, this product will cancel the menu automatically and start playback from the first chapter of the first title.

pSome DVDs may not operate properly. If this function is not fully operable, turn this function off and start playback.

pThis setting is available when the selected source is “Disc”, “CD”, “Video CD” or “DVD”.

1Display the “Video Setup” screen.

2Touch [DVD/DivX Setup].

3Touch [DVD Auto Play] repeatedly until the

desired setting appears.

Off (default): Turns the DVD Auto Play setting off

On: Turns the DVD Auto Play setting on

Setting the video signal for the rear view camera

When you connect a rear view camera to this product, select the suitable video signal setting.

pYou can operate this function only for the video signal input into the AV input.

1Display the “Video Setup” screen.

2Touch [Video Signal Setting].

3Touch [Camera].

The pop-up menu appears.

4 Touch the item you want to set.

29

Setting up the video player

Auto (default): Adjusts the video signal setting automatically.

PAL: Sets the video signal to PAL.

NTSC: Sets the video signal to NTSC.

PAL-M: Sets the video signal to PAL-M.

PAL-N: Sets the video signal to PAL-N.

SECAM: Sets the video signal to SECAM.

Favourite menu

Registering your favourite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the “Favorites” screen.

pUp to 12 menu items can be registered in the favourite menu.

Creating a shortcut

1 Display the “Settings” screen.

Common operations

				1
AUX
	6/10			21 48

Full

2 Touch the star icon of the menu item that you want to add to the favourite menu.

The star icon for the selected menu is filled in.

To cancel the registration, touch the star icon in the menu column again.

Selecting a shortcut

1Display the “Favorites” screen.

2Touch the desired menu item.

Removing a shortcut

1Display the “Favorites” screen.

2Touch and hold the favourite menu column you

want to remove.

The selected menu item is removed from the “Favorites” screen.

You can also remove a shortcut by touching the star icon in the registered menu column.

2

1 Clock display

Displays the time and date setting screen

Setting the time and date on page 30

2 Screen display mode key Changes the wide screen mode

Changing the wide screen mode on page 30

Setting the time and date

1Touch the current time on the screen.

2Touch or to set the correct time and

date.

You can operate the following items: Year, month, date, hour, minute.

pYou can change the time display format to “12hour” (default) or “24hour”.

pYou can change the order of date display format: Day-month- year, Month-day-year.

Changing the wide screen mode

You can set the screen size for the video and JPEG/BMP images.

pThe default setting is “Full”, and for JPEG/BMP images is “Normal”.

pWhen there are touch panel keys on the screen, images are displayed with the “Full” mode regardless of your setting.

1 Touch the following key.

pThe appearance of this key changes according to the current setting.

30