AVH-270BT
AVH-170DVD
AVH-271BT
AVH-171DVD
DVD RDS AV RECEIVER
AUTORADIO AV RDS LECTEUR DE DVD RADIO AV RDS CON DVD
Important (Serial number)
The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.
Important (Numéro de série)
Le numéro de série se trouve au bas de cet appareil. Pour votre sécurité et votre commodité, veillez à noter ce numéro sur la carte de garantie fournie.
Importante (Número de serie)
El número de serie se encuentra en la parte inferior de esta unidad. Por su propia seguridad y comodidad, asegúrese de anotar este número en la tarjeta de garantía que se adjunta.
Español Français English
Owner’s Manual Mode d’emploi Manual de instrucciones
Contents
Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference.
Important
The screens shown in the examples may differ from actual screens, which may be changed without notice for performance and function improvements.
■Precaution.......................... |
4 |
Information to User .......................................... |
4 |
License, Warranty Disclaimer & Limitation of |
|
Liability........................................................ |
5 |
Important safety information ............................ |
5 |
Parking brake interlock..................................... |
5 |
When using a display connected to V OUT ...... |
6 |
To avoid battery exhaustion.............................. |
6 |
Rear view camera ............................................ |
6 |
Handling the USB connector............................ |
6 |
Failure to operate ............................................. |
6 |
Visit our website............................................... |
6 |
Protecting the LCD panel and screen............... |
6 |
Notes on internal memory................................ |
6 |
About this manual ............................................ |
7 |
■Basic operation.................. |
8 |
Checking part names and functions ................. |
8 |
Remote control ................................................ |
8 |
Inserting/ejecting/connecting media................. |
8 |
On irst-time startup ......................................... |
8 |
How to use the screens.................................... |
9 |
Supported AV source ..................................... |
10 |
Selecting a source ......................................... |
10 |
Using the touch panel .................................... |
10 |
■Registration and connection of Bluetooth
device ............................... |
10 |
Displaying the “Bluetooth” screen................... |
10 |
Registering your Bluetooth devices................ |
10 |
2
Connecting a registered Bluetooth device |
|
manually ................................................... |
11 |
Switching visibility .......................................... |
11 |
Entering the PIN code for Bluetooth wireless |
|
connection ................................................ |
11 |
Displaying the device information................... |
11 |
Clearing the Bluetooth memory...................... |
11 |
Updating Bluetooth software .......................... |
11 |
Displaying the Bluetooth software version...... |
11 |
■Hands-free phoning......... |
12 |
Displaying the Phone menu screen................ |
12 |
Making a phone call ....................................... |
12 |
Receiving a phone call ................................... |
12 |
Changing the phone settings ......................... |
13 |
Notes for hands-free phoning......................... |
13 |
■Setup for iPod .................. |
13 |
iPod compatibility ........................................... |
13 |
Information on the connections and |
|
functions ................................................... |
13 |
■Radio ................................ |
14 |
Starting procedure ......................................... |
14 |
Storing the strongest broadcast |
|
frequencies .............................................. |
14 |
Tuning into strong frequencies ....................... |
14 |
■Disc................................... |
15 |
Starting procedure ......................................... |
16 |
Selecting iles from the ile name list .............. |
16 |
Switching the media ile type .......................... |
16 |
Searching for the part you want to play .......... |
16 |
Operating the DVD menu ............................... |
17 |
Switching the subtitle/audio language............ |
17 |
■Compressed audio |
|
iles ................................... |
17 |
Starting procedure (for Disc) .......................... |
18 |
Starting procedure (for USB).......................... |
18 |
Selectingilesfromtheilenamelist .............. |
18 |
Switching the media ile type .......................... |
18 |
■Compressed video |
|
iles ................................... |
18 |
Starting procedure ......................................... |
19 |
Selecting iles from the ile name list .............. |
19 |
■Still image iles ................ |
19 |
Starting procedure ......................................... |
19 |
Selecting iles from the ile name list .............. |
20 |
Switching the media ile type .......................... |
20 |
Setting the slideshow interval......................... |
20 |
■iPod .................................. |
20 |
Connecting your iPod..................................... |
21 |
Starting procedure ......................................... |
21 |
Selecting song or video sources from the playl- |
|
ist screen .................................................. |
21 |
■Bluetooth audio player.... |
21 |
Starting procedure ......................................... |
22 |
Selecting iles from the ile name list .............. |
22 |
■AUX source ...................... |
22 |
Starting procedure ......................................... |
22 |
Setting the video signal .................................. |
22 |
■System settings ............... |
23 |
Displaying the “System” setting screen .......... |
23 |
Activating the Bluetooth audio source ............ |
23 |
Setting the ever scroll..................................... |
23 |
Setting the rear view camera.......................... |
23 |
Setting the camera for Rear View mode ......... |
23 |
Selecting the system language ...................... |
23 |
Setting the beep sound .................................. |
23 |
Adjusting the response positions of the touch |
|
panel (touch panel calibration) .................. |
23 |
Setting the dimmer......................................... |
24 |
Adjusting the picture ...................................... |
24 |
■Audio adjustments .......... |
25 |
Displaying the “Audio” setting screen ............. |
25 |
Using fader/balance adjustment..................... |
25 |
Using balance adjustment.............................. |
25 |
Adjusting source levels .................................. |
25 |
Adjusting loudness......................................... |
25 |
Using the subwoofer output............................ |
25 |
Adjusting the subwoofer settings.................... |
26 |
Switching the rear speaker output.................. |
26 |
Switching the RCA rear output ....................... |
26 |
Boosting the bass .......................................... |
26 |
Setting the high pass ilter .............................. |
26 |
Using the equalizer ........................................ |
26 |
■Theme menu .................... |
27 |
Selecting the theme color............................... |
27 |
■Setting up the video |
|
player................................ |
27 |
Setting the top-priority languages .................. |
27 |
Setting the angle icon display......................... |
28 |
Setting parental lock ...................................... |
28 |
Setting the DivX Subtitle ................................ |
28 |
Displaying your DivX VOD registration |
|
code.......................................................... |
28 |
Displaying your DivX VOD deregistration |
|
code.......................................................... |
28 |
Automatic playback of DVDs .......................... |
29 |
Setting the video signal for the rear view |
|
camera...................................................... |
29 |
■Favorite menu .................. |
29 |
Creating a shortcut ........................................ |
29 |
Selecting a shortcut ....................................... |
29 |
Removing a shortcut ...................................... |
29 |
■Common operations........ |
29 |
Setting the time and date ............................... |
29 |
Changing the wide screen mode.................... |
29 |
■Other functions................ |
30 |
Resetting various settings/Restoring this prod- |
|
uct to the default settings .......................... |
30 |
■Connection....................... |
30 |
Precautions.................................................... |
30 |
Precautions before connecting the system..... |
30 |
Before installing this product .......................... |
31 |
To prevent damage ........................................ |
31 |
Notice for the blue/white lead ......................... |
31 |
This product ................................................... |
31 |
Power cord..................................................... |
32 |
Speaker leads ................................................ |
32 |
Power amp (sold separately).......................... |
32 |
iPod / iPhone.................................................. |
33 |
iPod / iPhone with Lightning connector .......... |
33 |
iPod / iPhone with 30-pin connector ............... |
33 |
Camera .......................................................... |
33 |
External video component and the display..... |
34 |
■Installation ....................... |
34 |
Precautions before installation ....................... |
34 |
Before installing ............................................. |
34 |
Installation notes............................................ |
34 |
Contents
Installation using the screw holes on the side of |
|
this product ............................................... |
35 |
Installing the microphone ............................... |
35 |
Mounting on the sun visor .............................. |
35 |
Installation on the steering column................. |
35 |
Adjusting the microphone angle..................... |
36 |
■Appendix .......................... |
36 |
Troubleshooting ............................................. |
36 |
Error messages ............................................. |
37 |
Handling and care of discs............................. |
38 |
Playable discs ................................................ |
38 |
Detailed information for playable media ......... |
39 |
Copyright and trademark notice ..................... |
41 |
Bluetooth ....................................................... |
41 |
WMA.............................................................. |
42 |
DivX ............................................................... |
42 |
AAC ............................................................... |
42 |
Detailed information regarding connected iPod |
|
devices...................................................... |
42 |
Using app-based connected content.............. |
42 |
Notice regarding video viewing ...................... |
42 |
Notice regarding DVD-Video viewing ............. |
42 |
Notice regarding MP3 ile usage .................... |
43 |
Using the LCD screen correctly...................... |
43 |
Speciications................................................. |
43 |
3
Precaution
Information to User
●MODEL NO. : AVH-270BT, AVH-271BT Contains FCC ID : AJDK083 Contains/Contient IC : 775E-K083
●This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
●The Bluetooth antenna cannot be removed (or replaced) by user.
●This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).
●This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
●This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
●Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.
●NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION:
THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.
CAUTION
This product is a Class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007, and contains a class 1M laser module. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.
CAUTION—CLASS 1M VISIBLE AND INVISIBLE
LASER RADIATION WHEN OPEN, DO NOT VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS.
WARNING
This product contains chemicals known to the State of California and other governmental entities to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
The Safety of Your Ears is in Your Hands
Get the most out of your equipment by playing it at a safe level— a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time, your hearing “comfort level” adapts to higher volumes of sound, so what sounds “normal” can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
ESTABLISH A SAFE LEVEL:
●Set your volume control at a low setting.
●Slowly increase the sound until you can hear it comfortably and clearly, without distortion.
●Once you have established a comfortable sound level, set the dial and leave it there.
4
Precaution
BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:
●Do not turn up the volume so high that you can’t hear what’s around you.
●Use caution or temporarily discontinue use in potentially hazardous situations.
●Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas.
License, Warranty Disclaimer &
Limitation of Liability
SAFETY PROVISIONS
Disclaimer
THE WARRANTIES SET FORTH IN PIONEER’S LIMITED WARRANTY ARE THE ONLY WARRANTIES MADE BY PIONEER OR ANY OF ITS LICENSORS, AS APPLICABLE. PIONEER
AND ITS LICENSORS EXPRESSLY DISCLAIM ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Limitation of Liability
TO THE MAXIMUM EXTENT PERMISSIBLE UNDER APPLICABLE LAW, NEITHER PIONEER NOR ITS LICENSORS WILL BE LIABLE TO YOU OR TO ANY OTHER PARTY FOR ANY INDIRECT, CONSEQUENTIAL, INCIDENTAL, PUNITIVE, OR SPECIAL DAMAGES, REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT OR IN TORT, INCLUDING NEGLIGENCE, EVEN IF SUCH PARTIES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TO THE MAXIMUM EXTENT PERMISSIBLE UNDER APPLICABLE LAW, PIONEER’S, OR ITS LICENSORS’, TOTAL LIABILITY OF ANY KIND ARISING OUT OF OR RELATED TO YOUR USE
OF THE PRODUCTS, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY CLAIMS, OR ANY CLAIMS FOR PROPERTY DAMAGE, DEATH OR DISABILITY, REGARDLESS OF THE FORUM AND REGARDLESS OF WHETHER ANY ACTION OR CLAIM IS BASED ON CONTRACT, TORT, (INCLUDING NEGLIGENCE), STRICT PRODUCT LIABILITY, OR ANY OTHER
LEGAL THEORY, WILL NOT EXCEED ONE THOUSAND DOLLARS (USD$1 000).
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF DAMAGES OR LIMITATION OF LIABILITY, SO THE ABOVE
EXCLUSIONS OR LIMITATIONS, TO THE EXTENT PROHIBITED BY APPLICABLE LAW, MAY NOT APPLY TO YOU. YOUR SPECIFIC RIGHTS MAY VARY FROM JURISDICTION TO JURISDICTION.
Important safety information
WARNING
●Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards.
●Do not allow this product to come into contact with liquids. Electrical shock could result. Also, damage to the product, smoke, and overheating could result from contact with liquids.
●If liquid or foreign matter should get inside this product, park your vehicle in a safe place, turn the ignition switch off (ACC OFF) immediately and consult your dealer or the nearest authorized Pioneer Service Station. Do not use this product in this condition because doing so may result in a fire, electric shock, or other failure.
●If you notice smoke, a strange noise or odor from this product, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or the nearest authorized Pioneer Service Station. Using this product in this condition may result in permanent damage to the system.
●Do not disassemble or modify this product, as there are high-voltage components inside which may cause an electric shock. Be sure to consult your dealer or the nearest authorized Pioneer Service Station for internal
inspection, adjustments or repairs.
Before using this product, be sure to read and fully understand the following safety information:
●Do not operate this product, any applications, or the rear view camera option (if purchased) if doing so will divert your attention in any way from the safe operation of your vehicle. Always observe safe driving rules and follow all existing traffic regulations. If you experience difficulty in operating this product or reading the display, park your vehicle in a safe location and apply the parking brake before making the necessary adjustments.
●Never set the volume of this product so high that you cannot hear outside traffic and emergency vehicles.
●To promote safety, certain functions are disabled unless the vehicle is stopped and/or the parking brake is applied.
●Keep this manual handy as a reference for operating procedures and safety information.
●Do not install this product where it may (i) obstruct the driver’s vision, (ii) impair the performance of any of the vehicle’s operating systems or safety features, including air bags or hazard lamp buttons or (iii) impair the driver’s ability to safely operate the vehicle.
●Please remember to fasten your seat belt at all times while operating your vehicle. If you are ever in an accident, your injuries can be considerably more severe if your seat belt is not properly buckled.
●Never use headphones while driving.
Parking brake interlock
Certain functions (such as viewing of video image and certain touch panel key operations) offered by this product could be dangerous (possibly resulting in serious injury or death) and/ or unlawful if used while driving. To prevent such functions from being used while the vehicle is in motion, there is an interlock system that senses when the parking brake is set and when the vehicle is moving. If you attempt to use the functions described above while driving, they will become disabled until you stop the vehicle in a safe place, and (1) apply the parking brake, (2) release the parking brake, and then (3) apply the parking brake again. Please keep the brake pedal pushed down before releasing the parking brake.
To ensure safe driving
WARNING
●LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND MUST BE CONNECTED TO THE POWER
SUPPLY SIDE OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.
●Do not take any steps to tamper with or disable the parking brake interlock system which is in place for your protection. Tampering with or disabling the parking brake interlock system could result in serious injury or death.
●To avoid the risk of damage and injury and the potential violation of applicable laws, this product is
not for use with a video image that is visible to the |
|
driver. |
5 |
|
Precaution
●In some countries the viewing of video image on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be
obeyed.
If you attempt to watch video image while driving, the warning “Viewing of front seat video source while driving is strictly prohibited.” will appear on the screen. To watch video image on this display, stop the vehicle in a safe place and apply the parking brake. Please keep the brake pedal pushed down before releasing the parking brake.
When using a display connected to V OUT
The video output terminal (V OUT) is for connection of a display to enable passengers in the rear seats to watch video images.
WARNING
NEVER install the rear display in a location that enables the driver to watch video images while driving.
To avoid battery exhaustion
Be sure to run the vehicle engine while using this product. Using this product without running the engine can drain the battery.
WARNING
Do not install this product in a vehicle that does not have an ACC wire or circuitry available.
Rear view camera
With an optional rear view camera, you are able to use this product as an aid to keep an eye on trailers, or backing into a tight parking spot.
WARNING
●SCREEN IMAGE MAY APPEAR REVERSED.
●USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE.
CAUTION
The rear view mode is to use this product as an aid to keep an eye on the trailers, or while backing up. Do not use this function for entertainment purposes.
6
Handling the USB connector
CAUTION
●To prevent data loss and damage to the storage device, never remove it from this product while data is being transferred.
●Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using this product.
Failure to operate
After-sales service for Pioneer products
Please contact the dealer or distributor from which you purchased the product for after-sales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below.
Please do not ship your product to the companies at the addresses listed below for repair without making advance contact.
●U.S.A
Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION
P.O. Box 1760 Long Beach, CA 90801-1760 800-421-1404
●CANADA
Pioneer Electronics of Canada, Inc. CUSTOMER SATISFACTION DEPARTMENT
340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada
1-877-283-5901
905-479-4411
For warranty information, please see the Limited Warranty sheet included with your product.
Visit our website
Visit us at the following site:
http://www.pioneerelectronics.com
http://www.pioneerelectronics.ca
1Register your product.
2 Receive updates on the latest products and technologies.
3Download owner’s manuals, order product catalogs, research new products, and much more.
4Receive notices of software upgrades and software updates.
Protecting the LCD panel and screen
●Do not expose the LCD screen to direct sunlight when this product is not used. This may result in LCD screen malfunction due to the resulting high temperatures.
●When using a cellular phone, keep the antenna of the cellular phone away from the LCD screen to prevent disruption of the video in the form of spots, colored stripes, etc.
●To protect the LCD screen from damage, be sure to touch the touch panel keys only with your finger and do so gently.
Notes on internal memory
Before removing the vehicle battery
● Some of the settings and recorded contents will not be reset.
Data subject to erasure
The information is erased by disconnecting the yellow lead from the battery (or removing the battery itself).
● Some of the settings and recorded contents will not be reset.
Resetting the microprocessor
CAUTION
Pressing the RESET button resets settings and recorded contents to the factory settings.
●Do not perform this operation when a device is connected to this product.
●Some of the settings and recorded contents will not be
reset.
The microprocessor must be reset under the following conditions:
●Prior to using this product for the first time after installation.
●If this product fails to operate properly.
●If there appears to be problems with the operation of the system.
●If your vehicle position is shown on the map with a significant positioning error.
1 Turn the ignition switch OFF.
Precaution
2 Press the RESET button with a pen tip or other pointed implement.
Checking part names and functions on page 8
Settings and recorded contents are reset to the factory settings.
About this manual
This manual uses diagrams of actual screens to describe operations. However, the screens on some units may not match those shown in this manual depending on the model used.
Meanings of Symbols Used in This
Manual
270BT |
This indicates model name that are supported |
|
the described operations. |
||
|
||
|
This indicates to touch an appropriate soft key |
|
|
on the touch screen. |
|
|
|
|
HOLD |
This indicates to touch and hold an appropriate |
|
soft key on the touch screen. |
||
|
|
|
|
This indicates that there is a reference or |
|
|
supplementary for the key or screen. |
7
Basic operation
Checking part names and functions
7 8 9
1
2
3
4
5
6
1 RESET |
Resetting the microprocessor on page 6 |
button |
|
2Volume (+/–) button
3MUTE Press to switch the mute setting to on or off. button
4 |
button |
Press to switch the display between the top |
|
menu screen and the current source screen. |
|
|
|
|
5 |
DISP |
Press to turn the display on or off. |
|
button |
|
6TRK Performs manual seek tuning, fast forward,
) |
reverse and track search controls. |
|
|
button |
|
7
button
8 Disc- |
Inserting and ejecting a disc on page 8 |
loading |
|
slot |
|
9LCD screen
Remote control
The remote control CD-R33 is sold separately.
For details concerning operations, see the remote control manual.
Inserting/ejecting/connecting media
CAUTION
Do not insert anything other than a disc into the disc-loading slot.
Inserting and ejecting a disc
Inserting a disc
Insert a disc into the disc-loading slot.
Ejecting a disc
Press
button to eject a disc.
Plugging and unplugging a USB storage device
PThis product may not achieve optimum performance with some USB storage devices.
PConnection via a USB hub is not possible.
PA USB cable is required for connection.
1Pull out the plug from the USB port of the USB cable.
2 Plug a USB storage device into the USB cable.
1
2
1 USB cable
2 USB storage device
Check that no data is being accessed before pulling out the USB storage device.
On irst-time startup
1 Start the engine to boot up the system.
After a short pause, the splash screen comes on for a few seconds.
The “Select Program Language” screen appears.
PFrom the second time on, the screen shown will differ depending on the previous conditions.
2Touch the language that you want to use on screen.
3 Touch 
.
The top menu screen appears.
8
Basic operation
How to use the screens
Time and date setting screen
10 |
6 |
2014 |
12 |
22 |
Month/Date |
|
d/m/y |
m/d/y |
|
Time Format |
|
12hour |
24hour |
|
|
Top menu screen |
|
Current source |
RADIO |
6/10 21 48 |
Setting menu screen
System
AV source icons |
Phone menu screen |
RADIO |
DISC |
IPOD |
BLUETOOTH |
AUX |
REAR VIEW |
OFF |
Phone Book |
3 |
ABC |
|
|
|
AUDIO |
|
ON |
|
|
|
|
|
|
|
|
|
|
|
abcdefghi |
|
|
|
|
|
|
|
|
|
abcdefghi |
|
|
|
|
|
|
|
|
|
abcdefghi |
|
A |
|
|
|
|
|
|
|
abcdefghi |
|
|
|
|
|
|
|
|
|
abcdefghi |
|
|
By pressing the 
button on any screen you can display the Top menu screen.
9
Basic operation
Supported AV source
You can play or use the following sources with this product.
●Radio
●CD
●ROM (compressed audio files)
●DVD-Video
The following sources can be played back or used by connecting an auxiliary device.
●USB
●iPod
●Bluetooth audio (AVH-270BT) (AVH-271BT)
●AUX
Selecting a source
Source on the Top menu screen
1 Press 
.
2 Touch the source icon you want to select.
P When you select “OFF”, the AV source is turned off.
Source on the source list
1 Display the source list.
CD |
6/10 |
21 48 |
|
|
ẂTrack 99
|
Pause |
9999’99” |
-9999’99” |
1 Displays the source list.
2 Touch the source key you want to select.
Using the touch panel
|
You can operate this product by touching the keys on the screen |
|
directly with your fingers. |
|
P To protect the LCD screen from damage, be sure to touch the |
10 |
screen only with your finger gently. |
|
Using the common touch panel keys
●
: Returns to the previous screen.
●
: Closes the screen.
Operating list screens
1 |
2 |
ROOT |
|
abcdefghi |
|
abcdefghi |
|
abcdefghi |
3 |
|
|
abcdefghi |
|
abcdefghi |
|
1 Touching an item on the list allows you to narrow down the options and proceed to the next operation.
2Appears when all characters are not displayed on the display area.
If you touch the key, the rest are scrolled for display.
3Appears when items cannot be displayed on a single page. Touch 
or 
to view any hidden items.
Operating the time bar
1
9999’99” -9999’99”
1 You can change the playback point by dragging the key.
PThis function is not available when the Bluetooth Audio is selected as the AV source.
Switching the operation panel
: Switches the operation panel of AV sources.
This key is not available on all sources.
Registration and connection of Bluetooth device
270BT 271BT
Displaying the “Bluetooth” screen
1 Press 
.
2 Touch 
, and then 
.
The “Bluetooth” screen appears.
Registering your Bluetooth devices
P If three devices are already paired, “Memory Full” is displayed. Delete a paired device first.
Deleting a registered device on page 11
1Activate the Bluetooth wireless technology on your devices.
2 Display the “Bluetooth” screen.
Displaying the “Bluetooth” screen on page 10
3 Touch [Connection].
4 Touch 
.
The system searches for Bluetooth devices waiting for a connection and displays them in the list if a device is found.
5 Touch the Bluetooth device name you want to register.
PIf your device supports SSP (Secure Simple Pairing), a sixdigit number appears on the display of this product. Touch [Yes] to pair the device.
POnce the connection is established, the device name is displayed. Touch the device name to disconnect.
After the device is successfully registered, a Bluetooth connection is established from the system.
PThe Bluetooth connection can be also made by detecting this product from the Bluetooth device. Before registration, make sure that “Visibility” in the “Bluetooth” menu is set to “On”. For details on a Bluetooth device operations, refer
Registration and connection of Bluetooth device
to the operating instructions supplied with the Bluetooth device.
Switching visibility on page 11
Connecting to a Bluetooth device automatically
This function connects the last connected Bluetooth device to this product automatically as soon as the two devices are less than a few meters apart.
1 Display the “Bluetooth” screen.
Displaying the “Bluetooth” screen on page 10
2Touch [Auto Connect] to switch “On” (default) or “Off”.
Deleting a registered device
CAUTION
Never turn this product off while the paired Bluetooth device is being deleted.
1 Display the “Bluetooth” screen.
Displaying the “Bluetooth” screen on page 10
2 Touch [Connection].
3 Touch 
.
Connecting a registered Bluetooth device manually
Switching visibility
This function sets whether or not to make this product visible to the other device.
1 Display the “Bluetooth” screen.
Displaying the “Bluetooth” screen on page 10
2Touch [Visibility] to switch “On” (default) or “Off”.
Entering the PIN code for Bluetooth wireless connection
To connect your Bluetooth device to this product, you need to enter a PIN code.
You can change the PIN code with this function.
1 Display the “Bluetooth” screen.
Displaying the “Bluetooth” screen on page 10
2 Touch [PIN Code Input].
3Touch [0] to [9] to input the pin code (up to 8 -digits).
4 Touch 
.
P The default PIN code is “0000”.
Displaying the device information
1 Display the “Bluetooth” screen.
Displaying the “Bluetooth” screen on page 10
3 Touch [Clear].
The confirmation screen appears.
Updating Bluetooth software
This function is used to update this product with the latest Bluetooth software. For details on Bluetooth software and updating, refer to our website.
PThe source is turned off and the Bluetooth connection is disconnected before the process starts.
PThis setting is available only when you stop your vehicle in a safe place and apply the parking brake.
PYou need to store the version up file to the USB storage device in advance.
CAUTION
Never turn this product off and never disconnect the phone while the software is being updated.
1 Connect the USB storage device stored the version up file to this unit.
Plugging and unplugging a USB storage device on page 8
2 Display the “Bluetooth” screen.
Displaying the “Bluetooth” screen on page 10
3 Touch [BT Software Update].
4 Touch [Start].
Follow the on-screen instructions to finish updating the Bluetooth software.
Displaying the Bluetooth software version
Connect the Bluetooth device manually in the following cases:
●Two or more Bluetooth devices are registered, and you want to manually select the device to be used.
●You want to reconnect a disconnected Bluetooth device.
●Connection cannot be established automatically for some reason.
1Activate the Bluetooth wireless technology on your devices.
2 Display the “Bluetooth” screen.
Displaying the “Bluetooth” screen on page 10
3 Touch [Connection].
4Touch the name of the device that you want to connect.
2 Touch [Device Information].
The device name and address of the Bluetooth device and this product are displayed.
Clearing the Bluetooth memory
PThis setting is available only when you stop your vehicle in a safe place and apply the parking brake.
CAUTION
Never turn this product off while the Bluetooth memory is being cleared.
1 Display the “Bluetooth” screen.
Displaying the “Bluetooth” screen on page 10
2 Touch [Bluetooth Memory Clear].
If this product fails to operate properly, you may need to consult your dealer for repair.
In such cases, perform the following procedure to check the software version on this unit.
1 Display the “Bluetooth” screen.
Displaying the “Bluetooth” screen on page 10
2 Touch [BT Version Info].
The version of this product’s Bluetooth module appears.
11
Hands-free phoning
270BT 271BT
Bluetooth telephone connected indicator
The device number of the connected device is displayed.
Reception status of the cellular phone
Battery status of the cellular phone
|
Phone Book |
3 |
ABC |
*1 |
abcdefghi |
|
|
|
|
|
|
*2 |
abcdefghi |
|
|
*3 |
abcdefghi |
|
A |
|
|
|
|
|
abcdefghi |
|
|
*4 |
|
|
|
|
abcdefghi |
|
|
Displaying the Phone menu screen
1 Press 
.
2 Touch 
.
The Phone menu screen appears.
Making a phone call
You can make a phone call in many different ways.
Direct dialing
1 Display the “Phone menu” screen.
Displaying the Phone menu screen on page 12
2 Touch 
.
3Touch the number keys to enter the phone number.
4 Touch 
to make a call.
5 Touch 
to end the call.
P You may hear a noise when you hang up the phone.
|
Switches to the initial search. |
*1 |
Displays the preset dial screen. |
|
Using the preset dial lists on page 12 |
*2 |
Switches to the phone book list. |
|
Calling a number in the phone book on page 12 |
*3 |
Switches to the missed, received and dialed call lists. |
|
Dialing from the history on page 12 |
*4 |
Switches the mode to enter the phone number |
|
directly. |
Direct dialing on page 12
CAUTION
For your safety, avoid talking on the phone as much as possible while driving.
To use this function you need to connect your cellular phone to this product via Bluetooth in advance.
Registration and connection of Bluetooth device on page 10
Calling a number in the phone book
PThe contacts on your phone will be automatically transferred to this product.
P“Visibility” of the “Bluetooth” screen should be on.
Switching visibility on page 11
1 Display the “Phone menu” screen.
Displaying the Phone menu screen on page 12
2 Touch 
.
3 Touch the desired name on the list.
4 Touch the phone number you want to dial.
The dial screen appears and dialing starts.
5 Touch 
to end the call.
Dialing from the history
1 Display the “Phone menu” screen.
Displaying the Phone menu screen on page 12
2 Touch 
.
3 Touch the item to switch the history list.
The following items are available:
●
: Received call list
●
: Dialed call list
●
: Missed call list
4 Touch the desired entry on the list to make a call.
The dial screen appears and dialing starts.
5 Touch 
to end the call.
Using the preset dial lists
Registering a phone number
You can easily store up to six phone numbers per device as presets.
1 Display the “Phone menu” screen.
Displaying the Phone menu screen on page 12
2 Touch 
or 
.
On the “Phone Book” screen, touch the desired name.
3 Touch 
.
Dialing from the preset dial list
1 Display the “Phone menu” screen.
Displaying the Phone menu screen on page 12
2 Touch 
.
3 Touch the desired item you want to dial.
The dial screen appears and dialing starts.
Receiving a phone call
1Touch 
to answer the call.
If you touch 
while getting a call waiting, you can switch to the talking person.
Touch 
to reject the call.
2 Touch 
to end the call.
12
Hands-free phoning
Changing the phone settings
Answering a call automatically
1 Display the “Bluetooth” screen.
Displaying the “Bluetooth” screen on page 10
2Touch [Auto Answer] to switch “On” or “Off” (default).
Switching the ring tone
You can select whether or not to use this product’s ring tone.
1 Display the “Bluetooth” screen.
Displaying the “Bluetooth” screen on page 10
2Touch [Ring Tone] to switch “On” (default) or “Off”.
Inverting names in the phone book
1 Display the “Bluetooth” screen.
Displaying the “Bluetooth” screen on page 10
2 Touch [Invert Name].
Setting the private mode
During a conversation, you can switch to private mode (talk directly on your cellular phone).
Touch 
or 
to turn private mode on or off.
Adjusting the other party’s listening volume
This product can be adjusted to the other party’s listening volume.
Touch 
to switch between the three volume levels.
P Settings can be stored for each device.
Notes for hands-free phoning
General notes
●Connection to all cellular phones featuring Bluetooth wireless technology is not guaranteed.
●The line-of-sight distance between this product and your cellular phone must be 10 meters or less when sending and receiving voice and data via Bluetooth technology.
●With some cellular phones, the ring sound may not be output from the speakers.
●If private mode is selected on the cellular phone, hands-free phoning may be disabled.
Registration and connection
●Cellular phone operations vary depending on the type of cellular phone. Refer to the instruction manual that came with your cellular phone for detailed instructions.
●When phone book transfer does not work, disconnect your phone and then perform pairing again from your phone to this product.
Making and receiving calls
●You may hear a noise in the following situations:
—When you answer the phone using the button on the phone.
—When the person on the other end of the line hangs up the phone.
●If the person on the other end of the line cannot hear the conversation due to an echo, decrease the volume level for hands-free phoning.
●With some cellular phones, even after you press the accept button on the cellular phone when a call comes in, handsfree phoning may not be performed.
●The registered name will appear if the phone number is already registered in the phone book. When one phone number is registered under different names, only the phone number will be displayed.
The received call and the dialed number histories
●You cannot make a call to the entry of an unknown user (no phone number) in the received call history.
●If calls are made by operating your cellular phone, no history data will be recorded in this product.
Phone book transfers
●If there are more than 1 000 phone book entries on your cellular phone, not all entries may download completely.
●Depending on the phone, this product may not display the phone book correctly.
●If the phone book in the phone contains image data, the phone book may not be transferred correctly.
●Depending on the cellular phone, phone book transfer may not be available.
Setup for iPod
When using an iPod with this product, configure the settings of this product according to the device to be connected.
iPod compatibility
This product supports only the following iPod models and iPod software versions. Others may not work correctly.
●iPhone 4, 4s, 5, 5s, 5c: iOS 7.0 or later.
●iPhone 3GS: iOS 6.0.1
●iPod touch (4th, 5th generation): iOS 6.0.1
●iPod touch (3rd generation): iOS 5.1.1
●iPod touch (2nd generation): iOS 4.2.1
●iPod classic 160GB (2009): Ver. 2.0.4
●iPod classic 160GB (2008): Ver. 2.0.1
●iPod classic 80GB: Ver. 1.1.2
●iPod nano (7th generation)
●iPod nano (6th generation): Ver. 1.2
●iPod nano (5th generation): Ver. 1.0.2
●iPod nano (4th generation): Ver. 1.0.4
●iPod nano (3rd generation): Ver. 1.1.3
PYou can connect and control an iPod compatible with this product by using separately sold connector cables.
POperation methods may vary depending on the iPod model and the software version.
PDepending on the software version of the iPod, it may not be compatible with this product.
For details about iPod compatibility with this product, refer to the information on our website.
This manual applies to the following iPod models. iPod with 30-pin connector
●iPhone 3GS, 4, 4s
●iPod touch 2nd, 3rd, 4th generation
●iPod classic 80GB, 160GB
●iPod nano 3rd, 4th, 5th, 6th generation iPod with Lightning connector
●iPhone 5, 5s, 5c
●iPod touch 5th generation
●iPod nano 7th generation
Information on the connections and functions
The settings and cables required for connecting each device, and the available sources are as follows.
13
Setup for iPod
iPod / iPhone with a 30-pin connector
When connecting via CD-IU201V (sold separately)
● Available sources iPod (audio)
iPod (video)
iPod / iPhone with a Lightning connector
When connecting via CD-IU52 (sold separately)
● Available sources iPod (audio)
Radio
Displays the preset channel list.
Select an item on the list ("1" to "6") to switch to the preset channel.
Selects the FM1, FM2, FM3 or AM band.
1 |
|
6/10 |
21 48 |
2Radio |
|
|
|
FM1 |
AM |
|
|
3Abcdefghi
4 |
Abcdefghi |
|
Abcdefghi |
||
|
||
5 |
|
6 |
|
|
|
000.0 MHZ |
|
|
|
|
|
|
|
|
|
|
|
|
Performs manual tuning.
HOLD Performs seek tuning or non stop seek tuning.
Releasing the key in a few seconds, skips to the nearest station from the current frequency. If you touch again while the system is searching, cancels seek tuning and performs manual tuning.
Keeping holding the key for a long seconds, performs non stop seek tuning.
Recalls the preset channel stored to a key from memory.
HOLD Stores the current broadcast frequency to a key.
PBy pressing
or
, you can also switch the preset channels.
PBy pressing and hold
or
and release, you can also perform seek tuning.
PBy keeping pressing and holding
or
, you can perform non stop seek tuning. If you press again, non stop seek tuning is canceled and the preset channel is switched.
14
Starting procedure
1 Press 
.
2 Touch [Radio].
The “Radio” screen appears.
Storing the strongest broadcast frequencies
The BSM (best stations memory) function automatically stores the six strongest broadcast frequencies under the preset tuning keys “1” to “6”.
PStoring broadcast frequencies with BSM may replace those you have already saved.
PPreviously stored broadcast frequencies may remain stored if the number of frequencies stored has not reached the limit.
1 Touch 
.
2 Touch 
to begin a search.
While the message is displayed, the six strongest broadcast frequencies will be stored under the preset tuning keys in order of their signal strength.
If you touch [Cancel], the storage process is canceled.
Tuning into strong frequencies
P You can use this function when “Radio” is selected as the source.
Local seek tuning allows you to only tune into those radio stations with sufficiently strong signals.
1 Display the “System” setting screen.
2 Touch [AV Source Settings].
3 Touch [Radio settings].
4 Touch [Local].
5 Touch the item you want to set.
●Off (default):
Turns the seek tuning setting off.
●Level1 to Level4:
Radio
Sets the level of sensitivity for FM to Level1 to Level4 (for AM Level1 or Level2).
PThe FM “Level4” (AM “Level2”) setting allows reception of only stations with the strongest signals.
Disc
Track number indicator
Audio source screen 1 |
|
|
|
|
|
|
|
|
||
|
CD |
6/10 |
21 48 |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||
|
ẂTrack 99 |
|
|
|
|
|
|
|
*1 |
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pause |
9999’99” |
-9999’99” |
*2 |
Skips les forward |
|
|
|
or backward. |
Switches between playback and pause.
Plays les in random order.
This function is available for music CD.
: Does not play tracks in random order.
: Plays all tracks in random order.
Audio source screen 2
CD |
6/10 |
21 48 |
|
|
ẂTrack 99
Hides the touch panel keys.
To display again the keys, touch anywhere on the screen.
Performs frame-by-frame playback.
HOLD Performs slow-motion playback.
Each time you touch 
it changes the speed in four steps in the following order: 1/16 →1/8 → 1/4 → 1/2
Video source screen 1
DVD |
6/10 21 48 |
||
|
|
||
|
|
|
*3 |
Stop |
|
|
*4 |
|
|
|
|
99 |
99 |
ᵫᶓᶊᶒᶇᴾᶁᶆ ᵫᵮᵣᵥᵋᵟ |
ᵦᶘᴾ ᶀᶇᶒ |
|
|
|
*5 |
FULL |
|
01 |
OFF |
|
|
Pause |
|
|
9999’99” |
-9999’99” |
|
|
Performs fast reverse |
||
|
or fast forward. |
|
|
|
Touch again to change the playback |
||
|
speed. |
|
|
Stops playback.
Sets a repeat play range.
: Repeats the current disc.
: Repeats the current track.
15
Disc
Video source screen 2 |
|
|
Video source screen 2 |
|
|
DVD |
6/10 |
21 48 |
DVD |
6/10 |
21 48 |
|
|
|
|
Stop |
|
|
|
|
|
Stop |
|
|
|
|
|
99 |
99 |
|
ᵫᶓᶊᶒᶇᴾᶁᶆ |
ᵫᵮᵣᵥᵋᵟ |
ᵦᶘᴾ ᶀᶇᶒ |
99 |
99 |
|
ᵫᶓᶊᶒᶇᴾᶁᶆ |
ᵫᵮᵣᵥᵋᵟ |
ᵦᶘᴾ ᶀᶇᶒ |
|
L+R |
01 |
|
|
ᵰᶃᶒᶓᶐᶌ |
|
L+R |
01 |
|
|
ᵰᶃᶒᶓᶐᶌ |
|
|
|
Pause |
|
|
|
|
|
Pause |
|
|
|
9999’99” |
|
-9999’99” |
|
|
9999’99” |
|
-9999’99” |
|
||
Sets a repeat play range. |
Resumes playback (Bookmark). |
||
|
|
|
|
|
|
: Repeats all les. |
This function is available for DVD-Video. |
|
|
: Repeats the current chapter. |
You can memorize one point as a |
|
|
||
|
|
Bookmark for a disc (up to ve discs). |
|
|
|
: Repeats the current title. |
|
|
|
To clear the bookmark on the disc, |
|
Changes the viewing |
touch and hold this key. |
||
angle (Multi-angle). |
Returns and begins playback from |
|
This function is available for DVDs |
||
the speci ed point. |
||
featuring multi-angle recordings. |
||
This function is available for DVD-Video |
||
|
||
Selects the audio output from |
and Video-CDs featuring PBC (playback |
|
[L+R], [Left], [Right], [Mix]. |
control). |
|
This function is available for Video-CDs |
|
|
and DVDs recorded with LPCM audio. |
Selects a track from the list. |
|
*1 |
||
|
Selecting files from the file name list on page 16 |
|
*2 |
Switches the media file type. |
|
|
Switching the media file type on page 16 |
|
*3 |
Searches for the part you want to play. |
|
|
Searching for the part you want to play on page |
|
|
16 |
|
*4 |
Displays the DVD menu. |
|
|
Operating the DVD menu on page 17 |
|
*5 |
Switches the subtitle/audio language. |
|
|
Switching the subtitle/audio language on page |
|
|
17 |
P |
By pressing |
or |
, you can also skip files/chapters |
|
|
forward or backward. |
|
|
|
P |
By pressing and holding |
or |
, you can also perform |
|
16 |
fast reverse or fast forward. |
|
||
|
|
|
|
|
PIf a Video-CD with PBC On is being played, 
appears.
PChanging the wide screen mode.
Common operations on page 29
You can play a normal music CD, Video-CD or DVD-Video using the built-in drive of this product.
CAUTION
For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.
Starting procedure
1 Press 
.
2 Insert the disc you want to play.
The source changes and then playback will start.
Inserting and ejecting a disc on page 8
P If the disc is already set, select [Disc] as the playing source.
Selecting iles from the ile name list
1 Touch 
.
2 Touch a track on the list to play back.
Switching the media ile type
When playing a digital media containing a mixture of various media file types you can switch between media file types to play.
1 Touch 
.
2 Touch the item you want to set.
● Music:
Switches the media file type to music (compressed audio).
● Video:
Switches the media file type to video.
● CD-DA:
Switches the media file type to CD (audio data (CD-DA)).
Searching for the part you want to play
PFor DVD-Videos, you can select [Title], [Chapter] or [10Key].
PFor Video-CDs, you can select [Track] or [10Key] (PBC only).
1 Touch 
.
Disc
2 Touch the item to select the search function.
3 Touch [0] to [9] to input the desired number.
P To cancel an input number, touch [C].
4Touch 
to start playback from the number you registered.
Operating the DVD menu
You can operate the DVD menu by touching the menu item on the screen directly.
PThis function may not work properly with some DVD disc content. In that case, use touch panel keys to operate the DVD menu.
1 Touch 
or 
.
2 Touch the desired menu item.
Switching the subtitle/audio language
Touch 
or 
to change the language.
●
: Changes the subtitle language.
●
: Changes the audio language.
You can also switch the subtitle/audio languages using the “DVD/DivX Setup” menu.
Setting the top-priority languages on page 27
Compressed audio iles
Displays the artwork when the le |
|
Plays les in random order. |
||||||||||||||||||||
with the artwork is being played. |
|
|||||||||||||||||||||
|
|
: Does not play les in random order. |
||||||||||||||||||||
The artwork le type needs to be JPEG, |
|
|
||||||||||||||||||||
and the le size should be less than 99 KB. |
|
|
: Plays all les within the repeat |
|||||||||||||||||||
|
|
|||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
Playback screen 1 (Example: USB) |
|
|
|
|
range in random order. |
|||||||||||||||||
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
6/10 21 48 |
|
|
|
|
|
|
|
|
|
Playback screen 2 (Example: USB) |
|||||||||||
USB |
|
|
|
|
|
|
|
|
|
USB |
6/10 |
21 48 |
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
Abcdefghi |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
Abcdefghi |
|
|
|
|
|
|
|
*1 |
Abcdefghi |
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
Abcdefghi |
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
ABC |
R&B |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
ABC |
|
R&B |
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9999’99” |
-9999’99” |
*2 |
Skips les forward |
|
|
|
|
|
|
|
Sets a repeat play range. |
||||||
|
or backward. |
||||||
Switches between playback |
|
or |
|
|
: Repeats all les. |
||
|
|
|
|||||
|
|
|
|
|
|
||
|
|
|
|
|
|
||
and pause. |
|
: Repeats the current folder. |
|||||
|
Switches the current music |
|
: Repeats the current le. |
||||
|
|
||||||
|
|
||||||
information display.
Selects the previous folder or the next folder.
*1 |
Selects a file from the list. |
|
|
|
Selecting files from the file name list on page 18 |
*2 |
Switches the media file type. |
|
|
|
Switching the media file type on page 18 |
P |
By pressing |
or |
, you can also skip files forward or |
|
|
backward. |
|
|
|
P |
By pressing and holding |
or |
, you can perform fast |
|
|
reverse or fast forward. |
|
|
|
You can play compressed audio files stored in a disc or a USB storage device.
Media compatibility chart on page 40
17
Compressed Compressed video iles audio iles
Hides the touch panel keys. |
(Example: Disc) |
Starting procedure (for Disc)
1 Press 
.
2 Insert the disc you want to play.
The source changes and then playback will start.
Inserting and ejecting a disc on page 8
P If the disc is already set, select [Disc] as the playing source.
Starting procedure (for USB)
1 Press 
.
2 Plug the USB storage device.
Plugging and unplugging a USB storage device on page 8
3 Touch [USB].
PPlay back is performed in order of folder numbers. Folders are skipped if they contain no playable files.
Selecting iles from the ile name list
You can find files or folders to play back using the file name or folder name list.
1 Touch 
.
2 Touch a file on the list to play back.
P Files are played back in file number order.
Switching the media ile type
When playing a digital media containing a mixture of various media file types you can switch between media file types to play.
1 Touch 
.
2 Touch the item you want to set.
● Music:
Switches the media file type to music (compressed audio).
● Video:
Switches the media file type to video.
● CD-DA:
Switches the media file type to CD (audio data (CD-DA)).
● Photo:
Switches the media file type to still image (JPEG or BMP
data).
18
To display again the keys, |
ROM |
|
6/10 21 48 |
|||||
touch anywhere on the screen. |
|
|
|
|||||
|
|
|
|
|
||||
(Example: Disc) |
|
|
|
|
|
|
|
|
ROM |
|
6/10 21 48 |
Stop |
|
|
|
|
|
|
|
|
Abcdefghi |
|
Abcdefghi |
|
||
|
|
|
|
|
|
|||
|
|
|
*1 |
FULL |
|
|
01 |
OFF |
|
|
|
|
|
|
|
|
|
Stop |
|
|
|
|
9999’99” |
Pause |
-9999’99” |
|
Abcdefghi |
Abcdefghi |
*2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FULL |
|
01 |
OFF |
*3 |
Performs fast reverse |
|||
|
|
|
|
|||||
|
|
|
|
|
||||
9999’99” |
Pause |
-9999’99” |
|
|
or fast forward. |
|||
|
|
|
|
|
Touch again to change the |
|||
|
|
|
|
|
playback speed. |
|||
Sets a repeat play range. |
Switches between |
|
||||||
|
|
|
|
|
||||
or |
: Repeats all les. |
playback and pause. |
|
|||||
: Repeats the current folder.
|
|
: Repeats the current le. |
*1 |
Selects a file from the list. |
|
||
|
|
|
|
Selecting files from the file name list on page 19 |
|||
|
|
|
|
||||
Performs frame-by-frame playback. |
*2 |
Switches the subtitle/audio language. |
|||||
|
|
|
|
Switching the subtitle/audio language on page |
|||
HOLD Performs slow-motion playback. |
|
17 |
|
|
|
||
*3 |
Switches the media file type. |
|
|||||
|
|
|
|
||||
|
|
|
|
Switching the media file type on page 18 |
|||
Stops playback. |
By pressing |
or |
, you can also skip files forward or |
||||
|
|
P |
|||||
|
|
|
backward. |
|
|
|
|
|
|
P |
By pressing and holding |
or |
, you can perform fast |
||
|
|
|
reverse or fast forward. |
|
|
||
P Changing the wide screen mode.
Common operations on page 29
You can play compressed video files stored on a disc or in an USB storage device.
Media compatibility chart on page 40
CAUTION
For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.
Compressed video iles
Starting procedure
Compressed audio files on page 17
Selecting iles from the ile name list
You can select files to view using the file name list.
1 Touch 
.
2 Touch a file on the list to play back.
PFiles are played back in file number order and folders are skipped when they contain no files.
Touch the playback sign of the thumbnail to preview the file.
Still image iles
Hides the touch panel keys. |
USB |
6/10 21 48 |
To display again the keys, |
|
|
touch anywhere on the screen. |
|
Rotates the displayed |
|
|
||
picture 90° clockwise. |
Abcdefghi |
|
||
Selects the previous |
|
Abcdefghi |
||
|
FULL |
|
||
or next folder. |
|
|
||
|
|
|
||
USB |
6/10 |
21 48 |
*2 |
|
|
|
Skips les forward |
||
|
|
|
|
|
|
|
*1 |
|
or backward. |
|
|
Switches between |
||
|
|
|
||
Abcdefghi |
Abcdefghi |
|
playback and pause. |
|
|
|
|
||
FULL |
|
|
|
|
|
|
*1 |
Selects a file from the list. |
|
|
|
|
Selecting files from the file name list on page 20 |
|
|
|
*2 |
Switches the media file type. |
|
Sets a repeat play range. |
Switching the media file type on page 20 |
|||
|
|
|||
|
|
: Repeats all les. |
P |
JPEG images are not displayed in the rear display. |
||||
|
|
: Repeats the current folder. |
P |
By pressing |
or |
, you can also skip files forward or |
||
|
|
|
backward. |
|
|
|
||
|
|
|
|
P |
By pressing and holding |
or |
, you can search 10 |
|
|
|
|
|
|
files at a time. If the file currently being played is the first or |
|||
|
Plays les in random order. |
|
last file in the folder, the search is not performed. |
|||||
|
P |
Changing the wide screen mode. |
|
|||||
|
|
|
|
|
||||
|
|
|
: Does not play les in random order. |
|
Common operations on page 29 |
|
||
|
|
|
: Plays all les in the current repeat |
You can view still images stored in an USB storage device. |
||||
|
|
|
||||||
|
|
|
|
Media compatibility chart on page 40 |
|
|||
|
|
|
play range in random order. |
|
|
|
|
|
|
|
|
|
Starting procedure |
|
|||
|
|
|
|
1 |
Press . |
|
|
|
|
|
|
|
2 Plug the USB storage device. |
|
|||
|
|
|
|
|
Plugging and unplugging a USB storage device on page 8 |
|||
|
|
|
|
P |
Playback is performed in order of folder numbers. Folders |
|||
|
|
|
|
|
are skipped if they contain no playable files. |
|||
|
|
|
|
3 |
Touch [USB]. |
|
|
|
|
|
|
|
The image is displayed on the screen. |
|
|||
19
Still image iles
Selecting iles from the ile name list
You can select files to view using the file name list.
1 Touch 
.
2 Touch a file on the list to play back.
PTouching a folder on the list shows its contents. You can play a file on the list by touching it.
Switching the media ile type
When playing a digital media containing a mixture of various media file types you can switch between media file types to play.
1 Touch 
.
2 Touch the item you want to set.
●Music:
Switches the media file type to music (compressed audio).
●Video:
Switches the media file type to video.
●Photo:
Switches the media file type to still image (JPEG data).
Setting the slideshow interval
JPEG or BMP files can be viewed as a slideshow on this product. In this setting, the interval between each image can be set.
PThis setting is available during playback of the JPEG or BMP files.
1 Display the “Video Setup” screen.
2 Touch [Time Per Photo Slide].
3 Touch the item you want to set.
The following items are available:
“10sec” (default), “5sec”, “15sec”, “Manual”.
iPod
Audio source screen 1
iPod |
6/10 |
21 48 |
|
|
|
|
|
|
Abcdefghi |
|
|
Abcdefghi |
|
|
ABC Pops |
|
|
99999/99999
9999’99” |
-9999’99” |
Skips les forward or backward.
Switches between playback and pause.
Sets a shuf e play.
: Plays randomly songs or videos within the selected list.
: Plays album randomly.
Audio source screen 2
iPod |
6/10 |
21 48 |
|
|
|
|
|
|
Abcdefghi |
|
|
Abcdefghi |
|
|
ABC Pops |
|
|
99999/99999 |
X1 |
Sets a repeat play range.
: Repeats all in the selected list.
: Repeats the current song or video.
Changes the audiobook speed.
1 : Normal playback
2 : Fast playback
1/2 : Slow-motion playback
20
iPod
Video source screen
iPodAbcdefghi6/10 21
48 
99999/99999
FULL
9999’99” |
-9999’99” |
Performs fast reverse or fast forward.
Selects a track from the list.
Selecting song or video sources from the playlist screen on page 21
PBy pressing the
or
button, you can also skip files forward or backward.
PBy pressing and hold the
or
button, you can also perform fast reverse or fast forward.
PChanging the wide screen mode.
Common operations on page 29
Connecting your iPod
For iPod with a 30-pin connector users
Via USB cable
PDepending on your iPod, a USB interface cable for iPod / iPhone (CD-IU201V) (sold separately), is required to connect.
iPod audio and/or video sources are enabled if either of the cables is connected.
iPod / iPhone with 30-pin connector on page 33
For iPod / iPhone with a Lightning connector users
Via USB cable
PWith a USB interface cable for iPod/iPhone (CD-IU52) (sold separately), iPod audio source is available.
However, functions related to iPod video files are not available.
iPod / iPhone with Lightning connector on page 33
CAUTION
For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place
and apply the parking brake.
Starting procedure
1 Connect your iPod.
Connecting your iPod on page 21
The source changes and then playback will start.
PIf connecting an iPhone or iPod touch, quit applications before.
2 Press 
.
3 Touch [iPod].
Selecting song or video sources from the playlist screen
You can search for the song or video you want to play from the playlist screen.
1 Touch 
.
2Touch 
or 
to switch the music or video category list.
3 Touch the category you want to search for.
4 Touch the title of the list that you want to play.
If you can not find the desired song or video, try to search again according to the above steps.
5 Start playback of the selected list.
PDepending on the generation or version of the iPod, some functions may not be available.
PYou can play playlists created with the MusicSphere application. The application is available on our website.
PUp to 1 000 items can be displayed in the list.
Bluetooth audio player 
270BT 271BT
Playback screen 1
Bluetooth6/10 21
48 
Abcdefghi
Abcdefghi
ABC 
House
|
9999 |
9999’99” |
-9999’99” |
Skips les forward or backward.
You cannot use this function while the audio is played back.
Track number indicator
Plays les in random order. Playback screen 2
Bluetooth6/10 21
48 
Abcdefghi
Abcdefghi
ABC 
House
9999
Sets a repeat play range.
Switches between playback and pause.
21
Bluetooth audio player 
Selects a file from the list.
Selecting files from the file name list on page 22
PBy pressing the
or
button, you can also skip files forward or backward.
PBy pressing and hold the
or
button, you can also perform fast reverse or fast forward.
PBefore using the Bluetooth audio player, register and con-
nect the device to this product.
Registering your Bluetooth devices on page 10
PDepending on the Bluetooth device connected to this product, the available operations with this product may be limited or differ from the descriptions in this manual.
PWhile you are listening to songs on your Bluetooth device, please refrain from operating the phone function as much as possible. If you try operating, the signal may cause noise for song playback.
PWhen you are talking on the Bluetooth device connected to this product via Bluetooth, it may pause playback.
Starting procedure
1 Display the “System” setting screen.
2 |
Touch [AV Source Settings]. |
3 |
Confirm that “Bluetooth Audio” is turned on. |
4 |
Press . |
5 |
Touch [Bluetooth Audio]. |
Selecting iles from the ile name list
PThis function may not be available depending on some Bluetooth device.
1 Touch 
.
2 Touch a file or a folder on the list to play back.
AUX source
Hides the touch panel keys.
To display again the keys, touch anywhere on the screen.
AUX |
6/10 |
21 48 |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FULL
Switches between the screen to operate video les and that to operate music les.
P
is only available when there are both audio and video files on the auxiliary equipment.
PA Mini-jack AV cable (CD-RM10) (sold separately) is required for connection.
External video component and the display on page 34
CAUTION
For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.
Starting procedure
You can display the video image output by the device connected to video input.
1 Display the “System” setting screen.
2 |
Confirm that “AUX Input” is turned on. |
3 |
Press . |
4 |
Touch [AUX]. |
The image is displayed on the screen.
Setting the video signal
When you connect this product to an AUX equipment, select the suitable video signal setting.
PYou can operate this function only for the video signal input into the AUX input.
1 Display the “Video Setup” screen.
2 Touch [Video Signal Setting].
3 Touch [AUX].
4 Touch the item you want to set.
The following items are available:
Auto (default), PAL, NTSC, PAL-M, PAL-N, SECAM.
22
System settings
Displaying the “System” setting screen
1 Press 
.
2 Touch 
, and then 
.
The “System” setting screen appears.
Activating the Bluetooth audio source
270BT 271BT
1 Display the “System” setting screen.
Displaying the “System” setting screen on page 23
2 Touch [AV Source Settings].
3Touch [Bluetooth Audio] to switch “On” (default) or “Off”.
Setting the ever scroll
When “Ever Scroll” is set to “On”, the recorded text information scrolls continuously in the display.
1 Display the “System” setting screen.
Displaying the “System” setting screen on page 23
2Touch [Ever Scroll] to switch “On” or “Off” (default).
Setting the rear view camera
A separately sold rear view camera (e.g. ND-BC6) is required for utilizing the rear view camera function. (For details, consult your dealer.)
Rear view camera
This product features a function that automatically switches to the full-screen image of the rear view camera installed on your vehicle, when the shift lever is in the REVERSE (R) position.
PWhen the shift lever is aligned to the REVERSE (R) position immediately after the system of this product is started up, only the camera image will be displayed and the parking assist guidelines will not be displayed.
Camera for Rear View mode
Rear View can be displayed at all times. Please note that with this setting, the camera image is not resized to fit, and that a portion of what is seen by the camera is not viewable.
CAUTION
Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen image may appear reversed.
PImmediately verify whether the display changes to a rear view camera image when the shift lever is moved to REVERSE (R) from another position.
PWhen the screen changes to full-screen rear view camera image during normal driving, switch to the opposite setting in “Camera Polarity”.
Setting rear view camera activation
1 Display the “System” setting screen.
Displaying the “System” setting screen on page 23
2 Touch [Camera Settings].
3Touch [Back Camera Input] to switch “On” or “Off” (default).
Setting the polarity of the rear view camera
P This function is available when “Back Camera Input” is “On”.
Setting rear view camera activation on page 23
1 Display the “System” setting screen.
Displaying the “System” setting screen on page 23
2 Touch [Camera Settings].
3 Touch [Camera Polarity].
●Battery (default):
The polarity of the connected lead is positive.
●Ground:
The polarity of the connected lead is negative.
Setting the camera for Rear View mode
To display “Rear View” at all times, “Rear View” needs to be set to “On”.
1 Press 
.
2 Touch [Rear View] to switch “On” or “Off” (default).
If no operations are performed for seven seconds on the AV operation screen, the camera view will appear automatically. P To set the rear view camera for Rear View mode, set “Back
Camera Input” to “On”.
Setting rear view camera activation on page 23
Selecting the system language
●If the embedded language and the selected language setting are not the same, text information may not display properly.
●Some characters may not be displayed properly.
1 Display the “System” setting screen.
Displaying the “System” setting screen on page 23
2 Touch [System Language].
3 Touch the language that you want to use.
Setting the beep sound
1 Display the “System” setting screen.
Displaying the “System” setting screen on page 23
2Touch [Beep Tone] to switch “On”(default) or “Off”.
Adjusting the response positions of the touch panel (touch panel calibration)
If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response positions of the touch panel screen.
PThis setting is available only when you stop your vehicle in a safe place and apply the parking brake.
PDo not use sharp pointed tools such as a ballpoint or mechanical pen, which could damage the screen.
PDo not turn off the engine while saving the adjusted position data.
1 Display the “System” setting screen.
Displaying the “System” setting screen on page 23
2 Touch [Touch Panel Calibration].
3Touch four corners of the screen along the arrows.
23
System settings
4 Press 
.
The adjustment results are saved.
5 Press 
once again.
Proceed to 16-point adjustment.
6 Gently touch the center of the “+” mark displayed on the screen.
The target indicates the order.
When you press 
, the previous adjustment position returns.
When you press and hold 
, the adjustment is canceled.
7 Press and hold 
.
The adjustment results are saved.
Setting the dimmer
Setting the dimmer trigger
PThis setting is available only when you stop your vehicle in a safe place and apply the parking brake.
1 Display the “System” setting screen.
Displaying the “System” setting screen on page 23
2 Touch [Dimmer Settings].
3 Touch [Dimmer Trigger].
4 Touch the item.
●Auto (default):
Switches the dimmer to on or off automatically according to your vehicle’s headlight turning on or off.
●Manual:
Switches the dimmer to on or off manually.
●Time:
Switches the dimmer to on or off at the time you adjusted.
Setting the dimmer duration in day or night
PYou can use this function when “Dimmer Trigger” is set to “Manual”.
PThis setting is available only when you stop your vehicle in a safe place and apply the parking brake.
1 Display the “System” setting screen.
Displaying the “System” setting screen on page 23
2 Touch [Dimmer Settings].
3 Touch [Day/Night] to switch the following ● items.
●
Setting the dimmer duration optional
You can adjust the time that the dimmer is turned on or off.
PYou can use this function when “Dimmer Trigger” is set to “Time”.
PThis setting is available only when you stop your vehicle in a safe place and apply the parking brake.
1 Display the “System” setting screen.
Displaying the “System” setting screen on page 23
2 Touch [Dimmer Settings].
3 Touch [Dimmer Duration].
The “Duration Setting” screen appears.
4Touch the time display to activate the adjustment mode.
5Touch the graph to set the dimmer duration.
You can also set the dimmer duration touching 
or 
.
Each touch of 
or 
moves the cursor backward or forward in the 15 minute width.
The default setting is 18:00-6:00 (6:00 PM-6:00 AM).
When the cursors are placed on the same point, the dimmer available time is 0 hours.
When the cursor for off time setting is placed on the left end and the cursor for on time setting is placed on the right end, the dimmer available time is 0 hours.
When the cursor for on time setting is placed on the left end and the cursor for off time setting is placed on the right end, the dimmer available time is 24 hours.
The time display of the dimmer duration adjusting bar is depending on the clock display setting.
Setting the time and date on page 29
Adjusting the picture
You can adjust the picture for each source and rear view camera.
CAUTION
For safety reasons, you cannot use some of these functions while your vehicle is in motion. To enable these functions, you must stop in a safe place and apply the parking brake. Refer to Important Information for the User (a separate manual).
1 Display the screen you wish to adjust.
2 Display the “System” setting screen.
Displaying the “System” setting screen on page 23
3 Touch [Picture Adjustment].
4 Touch the item to select the function to be adjusted.
●Brightness:
Adjusts the black intensity. (–24 to +24)
●Contrast:
Adjusts the contrast. (–24 to +24)
●Color:
Adjusts the color saturation. (–24 to +24)
●Hue:
Adjusts the tone of color (which color is emphasized, red or green). (–24 to +24)
●Dimmer:
Adjusts the brightness of the display. (+1 to +48)
With some pictures, you cannot adjust Hue and
Color.
When you touch [Rear View], the mode changes to the picture adjustment for rear view. By touching [Source], you can return to the picture adjustment for AV source.
5Touch 
, 
, 
, 
to adjust.
The adjustments of “Brightness”, “Contrast” and “Dimmer” are stored separately when your vehicle’s headlights are off (daytime) and on (nighttime).
“Brightness” and “Contrast” are switched automatically depending on whether the vehicle’s headlights are on or off.
24
System settings 
“Dimmer” can be changed the setting or the time to switch it to on or off.
Setting the dimmer on page 24
The setting contents can be memorized separately.
Audio adjustments
Displaying the “Audio” setting screen
1 Press 
.
2 Touch 
, and then 
.
The “Audio” setting screen appears.
Using fader/balance adjustment
PThis function is available when “Rear Speaker” is set to “Full”, and “Preout” is set to “Rear”.
1 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 25
2 Touch [Fader/Balance].
3Touch 
or 
to adjust the front/rear speaker balance.
4 Touch 
or 
to adjust the left/right speaker balance.
P“Front15” to “Rear15” is displayed as the front/rear speaker balance moves from the front to rear.
P“Left15” to “Right15” is displayed as the left/right speaker balance moves from the left to right.
PThe default setting is “F/R 0 L/R 0”.
You can also set the fader/balance by touching the point on the displayed table.
Using balance adjustment
PThis function is available when “Rear Speaker” and “Preout” are set to “Subwoofer Settings”.
1 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 25
2 Touch [Balance].
3 Touch 
or 
to adjust the left/right speaker balance.
P“Left15” to “Right15” is displayed as the left/right speaker balance moves from the left to right.
PThe default setting is “L/R 0”.
You can also set the balance by touching the point on the displayed table.
Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources.
PSettings are based on the FM tuner volume level, which remains unchanged.
PThis function is not available when the FM tuner is selected as the AV source.
1Compare the FM tuner volume level with the level of the source you want to adjust.
2 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 25
3 Touch [Source Level Adjuster].
4 Touch 
or 
to adjust the source volume.
PIf you directly touch the area where the cursor can be moved, the SLA setting will be changed to the value of the touched point.
P“+4” to “–4” is displayed as the source volume is increased or decreased.
PThe default setting is “0”.
Adjusting loudness
This function compensates for deficiencies in the low-frequency and high-frequency ranges at low volume.
PThis function is not available while you make or receive a call using the hands-free function.
1 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 25
2 Touch [Loudness].
3 Touch the item.
The following items are available:
Off (default), Low, Mid, High.
Using the subwoofer output
This product is equipped with a subwoofer output mechanism, which can be turned on or off.
1 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 25
2Touch [Subwoofer] to switch “On” (default) or “Off”.
25
Audio adjustments
Adjusting the subwoofer settings
P This function is available only when “Subwoofer” is “On”.
Using the subwoofer output on page 25
1 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 25
2 Touch [Subwoofer Settings].
3Touch 
or 
to turn the subwoofer phase to normal or reverse.
4Touch 
or 
to adjust the subwoofer level between -24 and 6.
5 Touch 
or 
to adjust the subwoofer frequency.
The following items are available:
80Hz(default), 50Hz, 63Hz, 80Hz, 100Hz, 125Hz.
Boosting the bass
1 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 25
2 Touch [Bass Booster].
3Touch to select the bass boost level from 0 to
+6.
Setting the high pass ilter
1 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 25
2 Touch [High Pass Filter].
3 Touch the item.
The following items are available:
Off(default), 50Hz, 63Hz, 80Hz, 100Hz, 125Hz.
Switching the rear speaker output
1 Turn the source off.
2 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 25
3 Touch [Rear Speaker].
4Touch to switch “Full” (default) or “Subwoofer Settings”.
When this function is set to “Subwoofer Settings”, “Preout” is fixed to “Subwoofer Settings”.
Switching the RCA rear output
When “Rear Speaker” is set to “Subwoofer Settings”, this setting is fixed to “Subwoofer Settings”.
1 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 25
2Touch [Preout] to switch “Subwoofer Settings”(default) or “Rear”.
Using the equalizer
Recalling equalizer curves
There are seven stored equalizer curves that you can easily recall at any time. Here is a list of the equalizer curves:
●S.Bass is a curve in which only low-pitched sound is boosted.
●Powerful is a curve in which lowand high-pitched sounds are boosted.
●Natural is a curve in which lowand high-pitched sounds are slightly boosted.
●Vocal is a curve in which the midrange, which is the human vocal range, is boosted.
●Flat is a flat curve in which nothing is boosted.
●Custom1 is an adjusted equalizer curve that you create. If you select this curve, the effect is applied to all AV sources.
●Custom2 is an adjusted equalizer curve that you create. If
you select this curve, the effect is applied to all AV sources. P The default setting is “Powerful”.
1 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 25
2 Touch [Graphic EQ].
3 Touch the equalizer you want.
Customizing the equalizer curves
You can adjust the currently selected equalizer curve setting as desired. Adjustments can be made with a 5-band graphic equalizer.
PIf you make adjustments when a curve “S.Bass”, “Powerful”, “Natural”, “Vocal”, or “Flat” is selected, the equalizer curve settings will be changed to “Custom1” mandatorily.
PIf you make adjustments when the “Custom2” curve is selected for example, the “Custom2” curve will be updated.
P“Custom1” and “Custom2” curves can be created common to all sources.
1 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 25
2 Touch [Graphic EQ].
3Select a curve that you want to use as the basis of customizing.
4 Touch the frequency for which you want to adjust the level.
PIf you trail a finger across the bars of multiple equalizer bands, the equalizer curve settings will be set to the value of the touched point on each bar.
26
Theme menu
Selecting the theme color
A theme color can be selected from 3 different colors.
1 Display the “Theme” screen.
2 Touch [Theme].
3 Touch the color you want.
Setting up the video player
Setting the top-priority languages
You can assign the top-priority language to the top-priority subtitle, audio and menu in initial playback. If the selected language is recorded on the disc, subtitles, audio and menu are displayed or output in that language.
PThis setting is available when the selected source is “Disc”, “CD”, “Video CD” or “DVD”.
Setting the subtitle language
You can set a desired subtitle language. When available, the subtitles will be displayed in the selected language.
1 Display the “Video Setup” screen.
2 Touch [DVD/DivX Setup].
3 Touch [Subtitle Language].
The pop-up menu appears.
4 Touch the desired language.
When you select “Others”, a language code input screen is shown. Input the four-digit code of the desired language then touch 
.
If the selected language is not available, the language specified on the disc is displayed.
You can also switch the subtitle language by touching the switch subtitle languages key during playback.
The setting made here will not be affected even if the subtitle language is switched during playback using the switch subtitle languages key.
Setting the audio language
You can set the preferred audio language.
1 Display the “Video Setup” screen.
2 Touch [DVD/DivX Setup].
3 Touch [Audio Language].
The pop-up menu appears.
4 Touch the desired language.
When you select “Others”, a language code input screen is shown. Input the four-digit code of the desired language then touch 
.
If the selected language is not available, the language specified on the disc is displayed.
You can also switch the audio language by touching the switch audio languages key during playback.
The setting made here will not be affected even if the audio language is switched during playback using the switch audio languages key.
Setting the menu language
You can set the preferred language in which the menus recorded on a disc are displayed.
1 Display the “Video Setup” screen.
2 Touch [DVD/DivX Setup].
3 Touch [Menu Language].
The pop-up menu appears.
4 Touch the desired language.
When you select “Others”, a language code input screen is shown. Input the four-digit code of the desired language then touch 
.
If the selected language is not available, the language specified on the disc is displayed.
27
Setting up the video player
Setting the angle icon display
The angle icon can be set so it appears on scenes where the angle can be switched.
PThis setting is available when the selected source is “Disc”, “CD”, “Video CD” or “DVD”.
1 Display the “Video Setup” screen.
2 Touch [DVD/DivX Setup].
3 Touch [Multi Angle] repeatedly until the desired setting appears.
●On (default): Turns the multi-angle setting on.
●Off: Turns the multi-angle setting off.
Setting parental lock
Some DVD-Video discs let you use parental lock to set restrictions so that children cannot watch violent or adult-oriented scenes. You can set the parental lock level in steps as desired.
PWhen you set a parental lock level and then play a disc featuring parental lock, code number input indications may be displayed. In this case, playback will begin when the correct code number is input.
PThis setting is available when the selected source is “Disc”, “CD”, “Video CD” or “DVD”.
Setting the code number and level
When you first use this function, register your code number. If you do not register a code number, the parental lock will not operate.
1 Display the “Video Setup” screen.
4Touch [0] to [9] to input a four-digit code number.
5 Touch the following key.
Registers the code number, and you can now set the level.
6 Touch any number between [1] to [8] to select the desired level.
● [8]: Enables playback of the entire disc (initial setting). ● [7] to [2]: Enables playback of discs for children and non-
adult oriented discs.
● [1]: Enables only playback of discs for children.
7 Touch the following key.
Sets the parental lock level.
PWe recommend to keep a record of your code number in case you forget it.
PThe parental lock level is recorded on the disc. You can confirm it by looking at the disc package, the included literature or the disc itself. You cannot use parental lock with discs that do not feature a recorded parental lock level.
PWith some discs, parental lock operates to skip certain scenes only, after which normal playback resumes. For details, refer to the disc’s instructions.
Setting the DivX Subtitle
PThis setting is available when the selected source is “Disc” or “USB”.
1 Display the “Video Setup” screen.
2Touch [DivX Subtitle] to switch “Original”
(default) or “Custom”.
2 Touch [DVD/DivX Setup].
3 Touch [Parental].
The “Parental” screen appears.
28
Displaying your DivX VOD registration code
If you want to play DivX® VOD (video on demand) content on this product, you must first register this product with your DivX VOD
content provider. You do this by generating a DivX VOD registration code, which you submit to your provider.
PKeep a record of the code as you will need it when you register this product to the DivX VOD provider.
PThis setting is available when the selected source is “Disc”, “CD”, “Video CD” or “DVD”.
1 Display the “Video Setup” screen.
2 Touch [DVD/DivX Setup].
3 Touch [DivX® VOD].
The “DivX® VOD” screen appears.
PIf a registration code has already been activated, it cannot be displayed.
4 Touch [Registration Code].
Your 10-digit registration code is displayed.
PMake a note of the code as you will need it when you deregister from a DivX VOD provider.
Displaying your DivX VOD deregistration code
A registration code registered with a deregistration code can be deleted.
PThis setting is available when the selected source is “Disc”, “CD”, “Video CD” or “DVD”.
1 Display the “Video Setup” screen.
2 Touch [DVD/DivX Setup].
3 Touch [DivX® VOD].
The “DivX® VOD” screen appears.
4 Touch [Deregistration Code].
Your 8-digit deregistration code is displayed.
PMake a note of the code as you will need it when you deregister from a DivX VOD provider.
Setting up the video player
Automatic playback of DVDs
When a DVD disc with a DVD menu is inserted, this product will cancel the menu automatically and start playback from the first chapter of the first title.
PSome DVDs may not operate properly. If this function is not fully operable, turn this function off and start playback.
PThis setting is available when the selected source is “Disc”, “CD”, “Video CD” or “DVD”.
1 Display the “Video Setup” screen.
2 Touch [DVD/DivX Setup].
3 Touch [DVD Auto Play] repeatedly until the desired setting appears.
●Off (default): Turns the DVD Auto Play setting off
●On: Turns the DVD Auto Play setting on
Setting the video signal for the rear view camera
When you connect a rear view camera to this product, select the suitable video signal setting.
PYou can operate this function only for the video signal input into the AV input.
1 Display the “Video Setup” screen.
2 Touch [Video Signal Setting].
3 Touch [Camera].
The pop-up menu appears.
4 Touch the item you want to set.
● Auto (default): Adjusts the video signal setting automatically.
● PAL: Sets the video signal to PAL. ● NTSC: Sets the video signal to NTSC.
● PAL-M: Sets the video signal to PAL-M. ● PAL-N: Sets the video signal to PAL-N. ● SECAM: Sets the video signal to SECAM.
Favorite menu
Registering your favorite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the “Favorites” screen.
P Up to 12 menu items can be registered in the favorite menu.
Creating a shortcut
1 Display the “Settings” screen.
2 Touch the star icon of the menu item that you want to add to the favorite menu.
The star icon for the selected menu is filled in.
To cancel the registration, touch the star icon in the menu column again.
Selecting a shortcut
1 Display the “Favorites” screen.
2 Touch the desired menu item.
Removing a shortcut
1 Display the “Favorites” screen.
2 Touch and hold the favorite menu column you want to remove.
The selected menu item is removed from the “Favorites” screen.
You can also remove a shortcut by touching the star icon in the registered menu column.
Common operations
|
|
|
|
1 |
|
|
|
|
|
|
|
||||
AUX |
6/10 |
21 48 |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FULL
2
1 Clock display
Displays the time and date setting screen
Setting the time and date on page 29
2 Screen display mode key Changes the wide screen mode
Changing the wide screen mode on page 29
Setting the time and date
1 Touch the current time on the screen.
2 Touch 
or 
to set the correct time and date.
You can operate the following items: Year, month, date, hour, minute.
PYou can change the time display format to “12hour” (default) or “24hour”.
PYou can change the order of date display format: Day-month- year, Month-day-year.
Changing the wide screen mode
You can set the screen size for the video and JPEG/BMP images.
PThe default setting is “Full”, and for JPEG/BMP images is “Normal”.
PWhen there are touch panel keys on the screen, images are displayed with the “Full” mode regardless of your setting.
1 Touch the screen display mode key.
PThe appearance of this key changes according to the current setting.
2 Touch the desired mode.
● Full
29
Common operations
A 4:3 picture is enlarged in the horizontal direction only, enabling you to enjoy an image without any omissions.
●Zoom
A 4:3 picture is enlarged in the same proportion both vertically and horizontally.
●Normal
A 4:3 picture is displayed normally, without changing its
proportion.
PYou cannot operate this function while driving.
PDifferent settings can be stored for each video source.
PWhen a video is viewed in a wide screen mode that does not match its original aspect ratio, it may appear different.
PThe video image will appear coarser when viewed in “Zoom” mode.
Other functions 
Resetting various settings/ Restoring this product to the default settings
You can restore settings or recorded content to the default settings. Various methods are used to clear user data.
Method 1: Remove the vehicle battery
Resets various settings registered to this product.
PThe settings configured on the “Theme” screen are not reset.
Method 2: Initialize from the “System” menu
Method 3: Press the RESET button
Resetting the microprocessor on page 6
Restoring the default settings
PThis setting is available only when you stop your vehicle in a safe place and apply the parking brake.
CAUTION
Do not turn off the engine while restoring the settings.
1 Display the “System” setting screen.
2 Touch [Restore Settings].
A message confirming whether to initialize the settings appears.
3 Touch [Restore].
PThe source is turned off and the Bluetooth connection is disconnected before the process starts.
Connection
Precautions
Your new product and this manual
●Do not operate this product, any applications, or the rear view camera option (if purchased) if doing so will divert your attention in any way from the safe operation of your vehicle. Always observe safe driving rules and follow all existing traffic regulations. If you experience difficulty in operating this product or reading the display, park your vehicle in a safe location and apply the parking brake before making the necessary adjustments.
●Do not install this product where it may (i) obstruct the driver’s vision, (ii) impair the performance of any of the vehicle’s operating systems of safety features, including airbags, hazard lamp buttons, or (iii) impair the driver’s ability to safely operate the vehicle. In some cases, it may not be possible to install this product because of the vehicle type or the shape of the vehicle interior.
Important safeguards
WARNING
Pioneer does not recommend that you install this product yourself. This product is designed for professional installation only. We recommend that only authorized Pioneer service personnel, who have special training and experience in mobile electronics, set up and install this product. NEVER SERVICE THIS PRODUCT YOURSELF. Installing or servicing this product and its connecting cables may expose you to the risk of electric shock or other hazards, and can cause damage to this product that is not covered by warranty.
Precautions before connecting the system
WARNING
Do not take any steps to tamper with or disable the parking brake interlock system which is in place for your protection. Tampering with or disabling the parking brake interlock system could result in serious injury or death.
30
Loading...