Philips IPF555, IPF520, IPF525 User Manual

0 (0)

IPF520

IPF525

IPF555

EN User Manual

Dear Customer

With the purchase of this device, you have chosen a quality PHILIPS product brand. Their device fulfils the most varied requirements for private use or in your office and busi-

EN ness everyday.

Your device is delivered with a starter cartridge for a few test pages.

You can assign frequently dialled numbers to speed dial keys or short dialling numbers. These functions help you to call these numbers quickly.

The built-in answering machine (IPF¦555) stores up to 30 minutes of messages. You can record internal and external voice messages (= memos). Using remote message retrieval, you can call new messages from each telephone.

You can send fax messages in different resolutions to one or more recipients. You can also poll faxes.

Select the resolution for text and photo in order to copy documents with your device. You can also create multiple copies.

You can send SMS messages from your device if this service is activated for your telephone line (this function is not supported in all countries and networks). Received SMS messages can be managed with the extensive functions of the SMS menu.

We hope you enjoy your device and its many functions!

About this User Manual

With the installation guide on the following pages, you can start using your device quickly and easily. Detailed descriptions can be found in the following sections of this user manual.

Read the entire user manual carefully. Follow all safety instructions in order to ensure proper operation of your device. The manufacturer accepts no liability if these instructions are not followed.

Multiple models of this device series are described in this user manual. Please note that some functions are only available with specific models.

Symbols Used

DANGER!

DANGER!

Warns about dangers for people, damage to the device or other objects as well as possible loss of data. Injuries or damage can result from improper handling.

Notice

Troubleshooting

This symbol designates tips that will help you to use your device more effectively and easily.

2

Philips · IPF 520 · 525 · 555

Table of Contents

 

Dear Customer ............................................................

2

About this User Manual ..............................................

2

1 General Safety Information ................

4

Setting Up the Machine ...............................................

4

Power Supply ..............................................................

4

Repairs .........................................................................

4

Consumable Materials .................................................

4

2 Overview...............................................

5

Overview of the Menu Functions ................................

5

Machine Overview .......................................................

6

Panel ...........................................................................

7

3 Initial Operation ..................................

8

Packing contents ..........................................................

8

Attaching Paper Tray ...................................................

8

Loading Paper .............................................................

8

Connecting handset .....................................................

9

Connecting the Telephone Cable ................................

9

Connecting the Mains Cable .......................................

9

Inserting Ink Cartridge ................................................

9

Initial Installation ......................................................

10

4 Telephone Functions .........................

12

Placing a call to the device .........................................

12

Hands-Free ................................................................

12

Secret mode ...............................................................

12

Speed Dialling ...........................................................

12

Telephone Book of the Device ...................................

13

Calling Line Identification (CLIP) .............................

14

Missed Calls ..............................................................

14

5 Answering Machine ...........................

15

Switching on and off .................................................

15

Editing the outgoing message ....................................

15

Listening to messages .................................................

16

Deleting Messages .....................................................

16

Recording Internal Memos ........................................

16

Setting up Remote Access ..........................................

16

Using remote access ...................................................

17

Remote Control Functions ........................................

17

Forwarding Messages .................................................

17

Modifying the Settings ..............................................

18

6 Fax .......................................................

19

Sending fax ................................................................

19

Sending Fax Manually ...............................................

19

Direct Inward Dialling or Selecting Sub-address ........

19

Sending to Multiple Recipients (= Broadcasting) .......

20

Sending Fax Later ......................................................

20

Fax Reception ............................................................

21

Polling Faxes ..............................................................

21

Selective Spam Filter ..................................................

21

7 Copier .................................................

22

Inserting Documents .................................................

22

Copying a Document ................................................

22

8 SMS .....................................................

23

 

SMS Requirements

23

 

 

Sending SMS .............................................................

23

EN

Sending saved SMS

24

 

Receiving SMS ...........................................................

24

 

 

Composing SMS ........................................................

25

 

Printing SMSs ............................................................

25

 

Deleting SMS ............................................................

25

 

Modifying the Settings ...............................................

25

 

9 Settings...............................................

27

Entering the Date and Time ......................................

27

Selecting the Language ...............................................

27

Selecting the Country ................................................

27

Entering Name and Fax Number ...............................

27

Entering Print Position ..............................................

28

Setting the Contrast ...................................................

28

Setting Page Adjustment ............................................

28

Adjusting Volume Level .............................................

28

Setting the fax switch .................................................

29

Setting the fax switch .................................................

29

Printing Lists .............................................................

31

Starting Initial Installation .........................................

32

Eavesdropping while Connection is Established .........

32

Set Up Receipt of Longer Documents ........................

32

10 Telephone Lines and Additional

 

Devices ....................................................

33

Configuring Telephone Lines and Services .................

33

PABX Systems ...........................................................

33

Connecting Additional Devices ..................................

34

Using Additional Telephones (Easylink) ....................

34

Detecting call signal clock pulse automatically ...........

35

11 Service ................................................

36

Changing the Ink Cartridge .......................................

36

Fixing a Paper Jam .....................................................

37

Fixing a Document Jam .............................................

37

Cleaning ....................................................................

37

Power Cycling ............................................................

39

Troubleshooting ........................................................

40

12 Appendix ............................................

41

Technical Data ..........................................................

41

Guarantee ..................................................................

41

Declaration of Conformity (DoC) .............................

42

Customer Information ...............................................

44

Table of Contents

3

1 General Safety Information

Your device has been tested in conformity with standards EN 60950-1 and IEC 60950-1 and should only be oper-

EN

ated with telephone systems and power equipment that meet these standards. The device was built exclusively for use in the indicated sales region.

Do not make any changes or settings that are not described in this user manual. Physical injury or damage to the device or loss of data can result from improper handling. Take note of all warning and safety notes indicated.

Setting Up the Machine

The device should rest securely on a stabile, flat surface. If the device should fall, it can be damaged or can cause injury to people, especially small children. Position all cables in such a way that no one will stumble on them, thus avoiding possible injuries to persons or damage to the device itself.

The distance between the device and other devices or objects must be at least 15 centimetres; this also applies to the use of additional cordless telephones. Do not place the device in the vicinity of radios or televisions.

Lock the cover of the device completely into place when opening the device. You could be injured if the cover falls while you are working on the device.

Protect the device against direct sunlight, heat, large temperature fluctuations and moisture. Do not place the device in the vicinity of heaters or air conditioners. Observe the information on temperature and humidity in the technical data.

The device must have sufficient ventilation and may not be covered. Do not put your device in closed cabinets or boxes. Do not place the machine on soft surfaces such as tablecloths or carpets and do not cover the ventilation slits. Otherwise, the device can overheat and catch on fire.

In the event that the device becomes too hot, or if you see smoke coming from the device, you must immediately pull the power cable out of the power socket. Have your device examined by trained professionals at a technical service location. To prevent the spread of fire, open flames should be kept away from the device.

Do not plug in the device in moist rooms. Never touch the mains cable, the mains connection or the telephone socket with wet hands.

Do not allow liquids to enter into the device. Disconnect the device from the power socket if liquids or foreign objects have entered the device and have your device examined by trained professionals at a technical service location.

Do not allow children to handle the device without supervision. The packing materials should be kept out of the hands of children.

The telephone handset of the device is magnetic. Caution, small metallic objects (paper clips) may be retained if placed near or on the telephone handset.

Power Supply

Check whether the mains voltage of your device (indicated on the type label) matches the mains voltage available at the setup location.

Use only the power and telephones cables supplied.

Set up your device so that the power socket is easily accessible. The device does not have an on/off button. In an emergency, disconnect your device from the power supply by pulling the power plug.

Never touch the power or telephone cable if the insulation is damaged. Replace damaged wires immediately. Use suitable cables only; if necessary please contact our technical customer service or your retailer.

Disconnect your device from the power and telephone networks during an electrical storm. If this is not possible, do not use the device during an electrical storm.

Before cleaning the surface of your device, disconnect it from the power and telephone networks. Use a soft, lintfree cloth. Never use liquid, gaseous or easily flammable cleansers (sprays, abrasives, polishes, alcohol). Do not allow any moisture to reach the interior of the device.

Only clean the display with a dry, soft cloth. If the display breaks, a mildly corrosive liquid may escape. Avoid all contact with your skin and eyes.

In the event of a power failure, your device will not function; saved data is retained.

Repairs

Should disruptions occur, follow the instructions on the display and on the error report.

Do not make any repairs to the device yourself. Improper maintenance can result in injuries or damage to the device. Only have your device repaired by an authorised service centre.

Do not remove the type label from your device; this would void the warranty.

Consumable Materials

Use only original consumable materials. These are available from a specialised retailer or through our order service (see back side of this user manual). Other consumable materials could damage the device or shorten its service life.

Dispose of old consumable materials according to the waste regulations of your country.

4

Philips · IPF 520 · 525 · 555

2 Overview

Overview of the Menu Functions

Press MENU to open the function menu. Page through [ menu entries. Confirm the selected function with o. Select further functions using [or o. Press Cto return to the previous menu level. Press jto close the menu and return to the starting mode.

RECEPT. SET-UP

RECEPTION MODE (IPF¦520)

AUTOMATIC

MANUAL

RECEPTION MODE (IPF¦525, IPF¦555)

AUTOMATIC

TAD/FAX

MANUAL

PHONE/FAX

SILENT RX

RING VOLUME

RINGS NUMBER

BLACK LIST

PRINT SET-UP

TX FROM MEMORY

PRINT REPORT

LAST TX REPORT

CALLER ID LIST

LAST BROADCAST

ACTIVITY REPORT

PHONE BOOK

CART. MAINTEN.

FAX SET-UP

DATE AND TIME

SET DATE/TIME

DATE FORMAT

HOUR FORMAT

VARIOUS SETT.

ECM

TX REPORT

FAX HEADER

BUZZER VOLUME

CONTRAST

PRINTER PARAM.

REDUCTION

SURPLUS

PRINT SET-UP

POLLING RX

INSTALLATION

STATION NAME

STATION NUMBER

DISTINCT. RING (IPF¦525, IPF¦555)

TEL.LINE SETUP

EN

LINE TYPE

 

DIAL MODE (country dependent)

CALLER ID

PBX FLASH

REMOTE CONTROL

FAX/TEL TIMER (IPF¦525, IPF¦555)

SILENCE LAPSE (IPF¦555)

LINE MONITOR

LANGUAGE

COUNTRY SET-UP

PRINT INSTALL.

TECHN. SERVICE

TAD SET-UP (IPF¦555)

ICM ON SPEAKER

OGM #1

OGM #2

OGM #3

FORWARD MSGS

ANNOUNCE ONLY

ICM REC.TIME

SECURITY

TOLL SAVER

PRINT SET-UP

Overview · Overview of the Menu Functions

5

Machine Overview

 

‚Handset (IPF¦525, IPF¦555)

 

ƒPaper tray

 

EN

„Document feeder (writing facing up)

 

…Panel with display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

‚ EXT socket—Connection socket for additional devices

ƒLINEsocket—Connection socket for telephone cable

„)Telephone handset socket—Connection socket for the telephone handset (IPF¦525, IPF¦555)

6

Philips · IPF 520 · 525 · 555

Panel

m—Calling up the telephone book entries. Select the entries with [or with the numeric keys

q—Recalling speed dial entries.

Green Lamp _—It flashes whenever an SMS message has arrived or when a document is waiting to be retrieved from the fax memory.

Red lamp Æ—If the lamp flashes or is lit, please read what is indicated on the display

j—Function abort / abort copying / return to the starting mode / delete error message

MENU—Call-up menu functions / call-up copy menu (document in the document feeder) / switch to 12 hour clock AM, PM / adjust volume level

u—Move the cursor

o—Starting transmission of messages / starting copying

C—Return to the previous menu level / press briefly: deleting individual characters / press and hold: deleting complete input

_—Calling up the SMS menu (function is not supported in all countries and networks) / in countries where the SMS function is not supported, start the print out of fax transmission reports using this key (list of the last ten fax messages sent and received).

ß—(IPF¦520): Listening while the connection is estab-

 

lished / (IPF¦525, IPF¦555): Dialling with the handset

 

replaced / (IPF¦525, IPF¦555): hands-free

 

@—Toggling between the list of the last 10 dialled num-

 

 

bers (= redial list), and the list of last 20 callers (= caller

EN

list). Confirm using o / insert dialling pause

 

R - trigger flash function (only if the device is configured

 

 

as an extension) / (IPF¦525, IPF¦555): Switching between

 

calls (= call toggling)

 

f x—Setting higher resolution for faxes and copying /

 

switching microphone off for hands-free

 

Numeric keypad—Inputting digits, characters and special

 

characters

 

Answering machine keys

(IPF¦555)

ç—Playback of the saved messages/ interrupting during playback

å– Listening to previous message

æ – Listening to next message /listen to message again/in the starting mode, recording a memo.

C—Deleting current message during play-back /press twice, delete all messages

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Overview · Panel

7

3 Initial Operation

Packing contents

EN

‚Device

ƒTelephone handset (IPF¦525, IPF¦555)

„Spiral cable for telephone handset (IPF¦525, IPF¦555)

…Paper tray

†Mains cable with plug (country-specific)

‡Telephone cable with plug (country-specific)

ˆInk cartridge (black)

User manual with installation guide (not depicted)

Notice

Missing Package Contents

If one of the parts is missing or damaged, please contact your retailer or our customer service.

Attaching Paper Tray

Insert the paper tray in the opening provided for it.

Loading Paper

Before you can receive documents or make copies, you must load paper into the device. Please use only appropriate paper in standard format A4 (210 × 297 millimetre · preferably 80 g/m2). Follow the specifications in the technical data.

Notice

Loading Paper

Separate the paper sheets by fanning them out, then align them by tapping edge of the stack lightly against a flat surface. This will prevent several sheets of paper from being drawn in all at once.

Loading Paper

1 Fold open the paper feed flap towards front until stop.

2Insert paper in the paper feeder. You can insert maximum 100 sheets (A4 · 80 g/m2).

3 Close the paper feed flap.

8

Philips · IPF 520 · 525 · 555

Philips IPF555, IPF520, IPF525 User Manual

Connecting handset

(IPF¦525, IPF¦555)

Plug one end of the spiral cable into the socket on the telephone handset. Put the other end into the socket at the device bottom marked with )symbol.

Connecting the Mains Cable

 

 

 

 

CAUTION!

 

 

Mains Voltage at the Site of Installation!

 

 

EN

Check whether the mains voltage of your device

 

(indicated on the type label) matches the mains

 

 

voltage available at the setup location.

 

 

Insert the mains cable into the connection located on the

 

rear side of the device. Plug the power cable into the elec-

 

trical outlet.

 

Connecting the Telephone

Cable

Notice

Analogue Fax Machine

Your device is an analogue fax device (Group 3). It is not an ISDN device (Group 4), and therefore it cannot be operated directly on an ISDN connection. In order to do this, you need either an analogue adapter or a connection for analogue terminals.

Connect the telephone cable to the device by inserting it in the socket designated with LINE (RJ-11-Connector). Insert the telephone plug into your PTT line socket.

Inserting Ink Cartridge

1Open the control panel, by lifting and folding it up in the centre. Click the control panel completely in place.

2Open the cartridge compartment by pressing on the upper right corner of the document holder (arrow) and then carefully lifting it backwards. Click the document holder completely in place.

Notice

Connection to Private Automatic Branch Exchange

If you connect your device as extension to a telephone system, you must set it for working as an extension (also see Chapter Telephone connections and additional devices, page 33).

Initial Operation · Connecting handset

9

3 Remove the cartridge from the packing and remove the

7 Then close the control panel.

protective strips.

 

EN

CAUTION!

Remove the Protection Strip!

Please make certain that the protective strip has been completely removed. Be careful not to touch the nozzles or contacts.

4Insert the cartridge into the holder with the coloured end facing front and the contacts facing down.

Notice

Only Insert Cartridge When Connected to the Electric Power Source

Only insert the cartridge if the device is connected to the electricity power supply. Otherwise, the cartridge will not be detected.

5 Press the cartridge down until it snaps into place.

6Close the device by folding the document holder down and swivelling the metal bracket upward.

Initial Installation

After you connect your device to the mains voltage, the initial installation commences.

Notice

Starting Initial Installation Process

You can start the initial installation at a later point of time using MENUand 1also

Notice

Printing the Functions List

You can print the menu overview using MENU and 2.

Selecting the Language

1 Use [to select the desired display language.

2 Confirm with o.

Selecting the Country

CAUTION!

Setting the Country Correctly!

You must set the country in which you are operating the device. Otherwise your device is not adapted to the telephone network. If your country is not included in the list, you must select a different setting and use the correct telephone cable for the country. Consult your retailer.

1Use [ to select the country in which you are operating the device.

2 Confirm with o.

10

Philips · IPF 520 · 525 · 555

Activating the Printing Head

1Confirm NEW PRINT CART.? using 1 to set the ink level memory to "full“.

2 A test page is printed.

3 Check the print sample for interruptions. EN

4 If necessary, repeat the printing using 0.

5 You can finish using 1 and j.

Entering the Date and Time

1Press MENU. RECEPT. SET-UP appears on the display.

2 Select using [FAX SET-UP.

3 Confirm with o.

4 Confirm DATE AND TIME with o.

5 Select using [SET DATE/TIME.

6 Confirm with o.

7 Enter the date (two digits each) e.g.

080608for 08.06.08.

8 Enter the time, e.g. 1400for 2 pm.

9 Confirm with o.

10 You can exit with j.

Notice

Format of Time and Date

Select further settings in step 5 using [

DATE FORMAT—Change the date format

HOUR FORMAT—Change the time format (12/ 24 clock).

Notice

Time and Date After a Short Power Failure

If SET DATE/TIME appears in the display, you must adjust the date and time.

1 Press MENUand confirm using o.

2 Enter the date and time with the numeric keys. 3 Confirm with o.

Initial Operation · Initial Installation

11

4 Telephone Functions

For information on how to connect additional telephones and which functions are available to you, please refer the

EN

chapter on Telephone Connections and Additional Devices, Page 33.

Placing a call to the device

(IPF¦525, IPF¦555)

Notice

No Paper in Paper Feeder

No paper must be present in the paper feeder for the telephone function. Otherwise the device switches to fax operation.

Dial the desired number. There are several ways to do this: Then pick up the handset.

Notice

Direct Dialling

You can also lift up the receiver first, then dial a number. The dialling process begins immediately.

Manual Dialling:

Dial the desired number using the numeric keypad.

Telephone Book:

1 Press m.

2 Select an entry using [.

Notice

Navigating in the Telephone Book

Enter the starting letters with the numeric keypad to quickly navigate through the telephone book.

Speed Dialling:

Press and hold (at least two seconds) the desired speed dial key (q).

Redial List:

1 Press @.

2 Using ^select OUTGOING CALLS.

3 Confirm with o.

4Use [ to select an entry from the list of the dialled numbers.

5 Confirm with o.

Caller List:

1 Press @.

2 Using `select INCOMING CALLS.

3 Confirm with o.

4 Use the [to select an entry from the list of callers.

5 Confirm with o.

Notice

Calling Line Identification (CLIP)

For this function to work, the Caller Line Identification (CLIP) must be activated for your telephone connection (country and network dependent). The number and name will not be shown if the caller suppresses his number.

Hands-Free

(IPF¦525, IPF¦555)

1Press ßto dial without lifting up the handset. You will hear a dial tone from the loudspeaker.

2Enter the desired number using the numeric keypad or select a saved entry. The dialling process begins immediately. At this stage, any numbers that have been incorrectly entered can no longer be changed.

Notice

Adjusting Volume Level

Using MENU, set the volume.

Secret mode

(IPF¦525, IPF¦555)

You can put the handset on mute, if you want to speak to someone without letting the caller hear the conversation.

1During a call, press ê. Your caller cannot hear anymore. LINE ON HOLD appears on the display.

2 Press êagain to continue with the call.

Speed Dialling

You can assign the speed dial keys to frequently dialled telephone numbers. You can load these telephone numbers quickly with the speed dial keys.

Assigning Speed Dial Entry

1Press MENU. RECEPT. SET-UP appears on the display.

2 Select using [PHONE BOOK.

3 Confirm with o.

4 Confirm NEW NUMBER with o.

5Enter 01—04 as a position for the speed dial keys (q) with the numeric keys. The position must always be a two digit number.

Notice

Speed Dial Entry Assigned

If you select a position that is already assigned, a message appears on the display.

6 Confirm with o.

12

Philips · IPF 520 · 525 · 555

7 Enter the telephone numbers.

8 Confirm with o.

9 Enter the name.

10 Confirm with o.

11 Select a ring tone using [.

12 Confirm with o.

13 Using [ select if would like to save further entries or exit the function.

14 Confirm with o.

Deleting a Speed Dial Entry

1Press MENU. RECEPT. SET-UP appears on the display.

2 Select using [PHONE BOOK.

3 Confirm with o.

4 Using [select DELETE.

5 Confirm with o.

6Using [ select the entry which you would like to delete.

Notice

Positions of the Speed Dial Entries

Speed dial entries are only saved in positions 01 to 04.

7 Confirm with o.

8 Using [select YES.

9 Confirm with o.

Telephone Book of the

Device

You can store up to 100 entries in the telephone book of your device. You can assign various ring tones to the entries. Follow the specifications in the technical data.

Notice

Navigating in the Telephone Book

You can move the cursor using u. Use Cto delete individual characters. Press jto close the menu and return to the starting mode.

Saving Entry

1Press MENU. RECEPT. SET-UP appears on the display.

2 Select using [PHONE BOOK.

3 Confirm with o.

4 Confirm NEW NUMBER with o.

5Enter the position of the entry using the numeric keys. The position must always be a two digit number.

6 Confirm with o.

Notice

Telephone Book Entry Assigned

If you select a position that is already assigned, a message appears on the display. If necessary, print out the telephone book in EN order to receive an overview of the positions

that are still available.

7 Enter the telephone numbers.

8 Confirm with o.

9Enter the name. You can enter characters using the numeric keys (see key labels). Enter special characters using *or #. Press the respective key several times until the character or special character appears on the display.

10 Confirm with o.

11 Select a ring tone using [.

12 Confirm with o. The entry is saved.

Save e-mail address

You can also save an e-mail address to which SMS messages can be sent.

1Press MENU. RECEPT. SET-UP appears on the display.

2 Select using [PHONE BOOK.

3 Confirm with o.

4 Using [select NEW ADDRESS.

5 Confirm with o.

6Enter the position of the entry using the numeric keys. The position must always be a two digit number.

7 Confirm with o.

8 Enter the e-mail address.

Notice

Enter E-Mail Addresses

Please note that e-mail addresses cannot contain a space.

9 Confirm with o.

10 Enter the name.

11 Confirm with o. The entry is saved.

Edit Entry

1Press MENU. RECEPT. SET-UP appears on the display.

2 Select using [PHONE BOOK.

3 Confirm with o.

4 Using [select MODIFY.

5 Confirm with o.

Telephone Functions · Telephone Book of the Device

13

6 Using [select the entry which you would like to edit.

Notice

Navigating in the Telephone Book

Enter the initial letters with the numeric keys EN to quickly navigate through the telephone

book.

7 Confirm with o.

8 Edit the number.

9 Confirm with o.

10 Edit the name.

11 Confirm with o.

12 Select a ring tone using [.

13 Confirm with o. The changed entry is saved.

Deleting an Entry

1Press MENU. RECEPT. SET-UP appears on the display.

2 Select using [PHONE BOOK.

3 Confirm with o.

4 Using [select DELETE.

5 Confirm with o.

6Using [ select the entry which you would like to delete.

Notice

Navigating in the Telephone Book

Enter the initial letters with the numeric keys to quickly navigate through the telephone book.

7 Confirm with o.

8 Using [select YES.

9 Confirm with o.

Printing the Telephone Book

1Press MENU. RECEPT. SET-UP appears on the display.

2 Select using [PHONE BOOK.

3 Confirm with o.

4 Using [select PRINT PHONE B..

5 Confirm with o.

Calling Line Identification (CLIP)

The number of an incoming call appears on the display. For this function to work, the Calling Line Identification Presentation (CLIP) must be activated for your telephone connection. Enquire with your telephone company. Caller Line Identification may be associated with a fee.

Notice

Setting the Country Correctly

If the Caller Line Identification does not work even though the function is activated for your telephone connection, check if you have set the correct country.

Notice

Number is Suppressed

The number and name will not be shown if the caller suppresses his number.

Switching Caller Line Identification On/Off

1Press MENU. RECEPT. SET-UP appears on the display.

2 Select using [INSTALLATION.

3Confirm with o. STATION NAME appears on the display.

4 Select using [TEL.LINE SETUP.

5 Confirm with o.

6 Select using [CALLER ID.

7 Confirm with o.

8Using [ select whether the telephone number of the caller is to be displayed or not .

9 Confirm with o.

10 You can exit with j.

Missed Calls

(IPF¦525, IPF¦555)

1 Press @.

2 Using `select INCOMING CALLS.

3 Press o.

4 Using [, you can page through the list of missed calls.

Notice

Newly missed calls are indicated by means of a flashing indicator light.

5 Confirm with o.

6 To call back, pick up the handset.

14

Philips · IPF 520 · 525 · 555

Loading...
+ 30 hidden pages