Philips 14PT2665, 21PT 1664, 14PT1565, 17PT1565, 17PT1564 User Manual

...
0 (0)

Introduction

When setting up your television set for the first time, we advise you

to use the quick installation guide included below.

Please read the following instructions carefully to familiarise yourself with all the features available on your set.

We hope our technology meets entirely with your satisfaction.

Table of Contents

 

Installation

 

Installing the television set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

The keys on the television set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

Tuning in to the TV channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

Quick installation (first-time users) . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.3

Renumbering programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

Manual tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4

Other settings on the INSTALLATION menu . . . . . . . . . . . . . . . . . . . . . .

4

Use

Using other menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Adjusting sound and picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Storing adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Locking the set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Timer function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Remote control keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Peripherals

Video recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Other equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Side panel connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Video recorder key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Recycling

The materials used in your set are either reusable or can be recycled.

To minimise environmental waste, specialist companies collect used appliances and dismantle them after retrieving any materials that can be used again (ask your dealer for further details).

1

Philips 14PT2665, 21PT 1664, 14PT1565, 17PT1565, 17PT1564 User Manual

Installing your television set

æ Positioning the television set

Place your TV on a solid, stable surface, leaving a space of at least 5 cm around the appliance.

To avoid accidents, do not put anything on the set such as a cloth or cover, a container full of liquid (vase) or a heat source (lamp).The set must not be exposed to water.

ÂConnections

Insert the aerial plug into the M socket at the rear of the set.

Smaller sets are equipped with an internal aerial. Under certain conditions, reception can be poor.You can improve it by repositioning the aerial. If the reception remains unsatisfactory, an external aerial should be used.

Insert the mains plug into a wall socket (220-240 V / 50 Hz).

êRemote control

Insert the two R6-type batteries (supplied) making sure that they are the right way round.

The batteries supplied with this appliance do not contain mercury or nickel cadmium. Please do not discard your used batteries if you have access to a recycling facility (if in doubt, consult your dealer).When the batteries are replaced, use the same type.

® Switching on

To switch on the set, press the on/off key.

A red indicator comes on and the screen lights up.

Go straight to the chapter Quick installation on the following page.

If the television remains in standby mode, press P

on the remote

control.

 

The indicator flashes when you use the remote control.

 

The keys on the TV set

The television set has 4 keys which are located on the front or the top of the set depending on the model.

The VOLUME - + (-a+) keys are used to adjust the sound level. The PROGRAM - + (- P +) keys are used to select the required programmes.

To access the menus, hold down the VOLUME - and VOLUME + keys simultaneously.Then use the PROGRAM - + keys to select an adjustment and the VOLUME - + keys to make the adjustment.

To exit from the menu, hold down the VOLUME - and VOLUME + keys for a few seconds.

Note: when the LOCK function is activated, these keys are unavailable (see page 6).

2

Tuning in to channels

Quick installation (first use)

The following operations are all described in the enclosed quick

installation guide.We advise you to use it.

The first time you switch on the television, a menu appears on the screen.

This menu asks you to choose the language of the other menus.

If the menu does not appear, hold down the PROGRAMand PROGRAM+ keys (or a- and P -) on the set for 4 seconds to bring it up.

æUse the keys numbered from to on the remote control to choose your language (for English, press ).Another menu appears.

ÂSelect your country (for GB, press ).

êAs soon as your country is entered, tuning in starts automatically.

The operation takes a few minutes.A display shows the search status and the number of programmes found.When it has finished, the menu disappears and the last programme is displayed.

If no programmes are found, refer to the chapter entitled Tips on p. 10.

®If the transmitter or the cable network broadcasts the automatic sort signal, the programmes will be correctly numbered.

If not, the programmes found will be numbered in descending order starting at 99, 98, 97, etc. (or 79, 78, ...).

Use the SORT menu to renumber them.

Some transmitters or cable networks broadcast their own sort parameters (region,

language, etc.).Where this is the case, make your choice using the keys and confirm with .

To renumber the programmes found

æPress the key.The main menu is displayed.

ÂPress once to select INSTALLATION, then press .

The INSTALLATION menu appears.The LANGUAGE option is activated.

êPress 3 times to select SORT then press .

The SORT menu appears.The FROM option is activated.

®Select the programme you wish to renumber using keys or to . Example: to renumber programme 78 as 2, press .

Select option A (key ) and enter the new number with keys or to (for the example given, enter 2)

ÚSelect EXCHANGE (key ) and press .The message EXCHANGED appears, the exchange takes place ( to cancel). In our example,

programme 78 is renumbered as 2 (and programme 2 as 78).

ºSelect the option FROM (key ) and repeat stages ® to Ú as many times as there are programmes to renumber.

îTo exit from the menus, press .

3

Manual tuning

This menu allows you to store the programmes one by one.

æPress .The main menu comes up on the screen.

ÂPress once to select INSTALLATION then press .

êSelect MANUAL STORE () and press . The MANUAL STORE menu appears.

®Select SYSTEM (only available on certain models). Use to choose UK

(standard I), FRANCE (standard LL') or WESTEU (standard BG reception).

Select SEARCH and press .The search begins.

As soon as a programme is found, the search will stop.

If you know the frequency of the programme required, simply enter its number using keys to .

If no programme is found, refer to the Tips chapter on p. 10.

ÚIf reception is unsatisfactory, select FINE TUNE and press or to fine tune.

ºSelect PROGRAM NO. and enter the required programme number using or to .

îSelect STORE and press .

The message STORED appears.The programme has been stored.

œRepeat steps to î as many times as there are programmes to store. To exit the menus, press .

Other settings on the INSTALLATION menu

æ Press .The main menu is displayed on-screen.

ÂPress once to select INSTALLATION and press .The INSTALLATION menu appears.

êUse to select a setting and to adjust.

LANGUAGE: to change the menu language.

COUNTRY: to select the country you are in (GB for Great Britain).

This setting affects the automatic programme sort.

AUTOSTORE: press to begin storing.The operation takes a few minutes. When it is complete, the INSTALLATION menu reappears automatically. For more information, see the Quick Installation chapter, steps ê to

on the previous page.

To exit or interrupt the search, press .

EXTERNAL: press to bring up the menu.You have access to a series of names which allow you to customise the names of the external sockets.

When you next select an external socket, its chosen name will be displayed for a few seconds.

®To exit from the menus, press .

4

Loading...
+ 8 hidden pages