Philips 150P2E-00C, 150P2E-00H, 150P2E-05C, 150P2E-00Z, 150P2E-05Z User Manual

0 (0)

Philips 150P2E/150P2D Electronic User's Manual

file:///D|/Grace/150P2/english/150p2e/index.htm [9/5/2001 11:05:20 AM]
Safety and Troubleshooting Information
Safety Precautions and MaintenanceInstallation Locations FAQsTroubleshooting
Regulatory InformationOther Related Information
Safety precautions and maintenance
specified in this documentation may result in exposure to shock, electrical
hazards, and/or mechanical hazards.
Read and follow these instructions when connecting and using your computer monitor:
Unplug the monitor, if you are not going to use it for an extensive period of time.
Unplug the monitor, if you need to clean it with a slightly damp cloth. Wiping the screen with a dry
cloth is possible when the power is off. However, never use alcohol, solvents, or ammonia-based
liquids.
Consult a service technician if the monitor does not operate normally when following the instructions
in this manual.
The casing cover should be opened only by qualified service personnel.
Keep the monitor out of direct sunlight and away from stoves or any other heat source.
Remove any object that could fall into the vents or prevent proper cooling of the monitor’s electronics.
Do not block the ventilation holes on the cabinet.
Keep the monitor dry. To avoid electric shock, do not expose it to rain or excessive moisture.
When positioning the monitor, make sure the power plug and outlet are easily accessible.
If turning off the monitor by detaching power cable or DC power cord, wait for 6 seconds, then attach
the power cable or DC power cord for normal operation.
To avoid the risk of shock or permanent damage to the set, do not expose the monitor to rain or
excessive moisture.
When positioning the monitor, make sure the power plug and outlet are easily accessible.
Notice that always activate a screen saver program during your application. If an image remains in
the screen for an extended period of time, it may leave an after-image in front of the screen.
The after-image will disappear gradually over a period of time after switching off the power.
Consult a service technician if the monitor does not operate normally when operating instructions of this
manual are followed.
RETURN TO TOP OF THE PAGE
Installation Locations
Avoid Heat and Extreme Cold

Safety & Troubleshooting

file:///D|/Grace/150P2/english/150p2e/safety/safety.htm (1 of 2) [9/5/2001 11:06:09 AM]
Do not store or use the LCD monitor in locations exposed to heat, direct sunlight, or extreme cold.
Avoid moving the LCD monitor between locations with large temperature differences. Choose a site
falling within the following temperature and humidity ranges.
Temperature: 5-35°C 41-95°F
Humidity: 20-80% RH
Do not subject the LCD monitor to severe vibration or high impact conditions. Do not place the LCD
monitor inside a car trunk.
Take care not to mishandle this product by either knocking or dropping during operation or
transportation.
Do not store or use the LCD monitor in locations exposed to high humidity or a dusty environment.
Also do not allow water or other liquids to spill on or into the LCD monitor.
RETURN TO TOP OF THE PAGE
Safety & Troubleshooting
file:///D|/Grace/150P2/english/150p2e/safety/safety.htm (2 of 2) [9/5/2001 11:06:09 AM]
About This Manual
About This GuideNotational Descriptions
About This Guide
This electronic user's guide is intended for anyone who uses the Philips LCD Monitor. It describes the LCD
monitor's features, setup, operation and other pertinent information. Its contents are identical to the
information in our printed version.
Sections are as follows:
Safety and Troubleshooting Information provides tips and solutions for common problems as well as
other related information you may need.
About This Electronic User's Manual gives an overview of information included, along with notation
icon descriptions and other documentation for your reference.
Product Information gives an overview of the monitor's features and as well as the technical
specifications for this monitor.
Installing Your Monitor describes the initial setup process and gives an overview of how to use the
monitor.
On Screen Display provides information on adjusting the settings on your monitor.
Customer Care and Warranty contains a list of worldwide Philips Consumer Information Centers
along with help desk phone numbers and information on the warranty applicable to your product.
Glossary defines technical terms.
Download and Print Option transfers this entire manual to your hard drive for easy reference.
RETURN TO TOP OF THE PAGE
Notational Descriptions
The following subsections describe notational conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type.
These blocks contain notes, cautions, or warnings. They are used as follows:
NOTE: This icon indicates important information and tips that help you make better
use of your computer system.

About This Electronic User's Manual

file:///D|/Grace/150P2/english/150p2e/about/about.htm (1 of 2) [9/5/2001 11:06:11 AM]
CAUTION: This icon indicates information that tells you how to avoid either potential
damage to hardware or loss of data.
WARNING: This icon indicates the potential for bodily harm and tells you how to
avoid the problem.
Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the
specific presentation of the warning is mandated by regulatory authority.
RETURN TO TOP OF THE PAGE
©2001 Koninklijke Philips Electronics N.V.
All rights reserved. Reproduction, copying, usage, modifying, hiring, renting, public performance, transmission and/or broadcasting in whole or in
part is prohibited without written consent of Philips Electronics N.V.
About This Electronic User's Manual
file:///D|/Grace/150P2/english/150p2e/about/about.htm (2 of 2) [9/5/2001 11:06:11 AM]
Product Information
Product FeaturesTechnical SpecificationsResolution & Preset ModesPhilips Pixel
Defect PolicyAutomatic Power SavingPhysical SpecificationPin Assignment
Product ViewsPhysical Function
Product Features
150P2E / 150P2D
15" color LCD monitor with excellent display performance
Dual input- accepts both DVI Digital and VGA analog inputs
Embedded universal AC power supply
Linear height adjustment for best viewing position
Advance AUTO adjustment optimizes picture quality.
Rotation for both Portrait and landscape display
User installable bezel for optional protective cover choice
Optional USB powered hub
RETURN TO TOP OF THE PAGE
Technical Specifications*
LCD PANEL
• Type TFT LCD
• Screen size 15" visual
• Pixel Pitch 0.297 x 0.297mm (15.0")
• LCD Panel type
1024 x 768 pixels
R.G.B. vertical stripe
Anti-glare polarizer hardness
• Effective viewing area 304.1 x 228.1mm (15.0")
• Display Colors 8 bits interface (16M colors)
SCANNING
• Vertical refresh rate 56Hz-76Hz
• Horizontal frequency 30KHz-61KHz

150P2E/150P2D Product Information

file:///D|/Grace/150P2/english/150p2e/product/product.htm (1 of 8) [9/5/2001 11:06:13 AM]
VIDEO
• Video dot rate 80 MHz
• Input impedance
- Video 75 ohm
- Sync 2 kOhm
• Input signal levels 700m Vpp
• Sync input signal
Separate sync
Composite sync
Sync on Green
• Sync polarities Positive and negative
• Input Frequency
XGA Hsync 48- 61 KHz, Vsync 60 - 76 Hz (N.I.)
SVGA Hsync 35- 50 KHz, Vsync 56 - 75 Hz (N.I.)
VGA Hsync 31- 38 KHz, Vsync 60 - 76 Hz (N.I.)
• Video interface
Dual input: Both Analog (D-Sub) and DVI-D (Digital only) are
available It can be switching via OSD selection.
OPTICAL CHARACTERISTICS
• Contrast ratio 300 (typ.)
• Brightness
250 cd/m
2
(typ.)
• Peak contrast angle 6 o'clock
• White Chromacity x: 0.281 y: 0.311 (at 9300° K) x: 0.312 y: 0.338 (at 6500° K)
• Viewing Angle (C/R >5)
Upper >55° (typ.)
Lower >60° (typ.)
Left >75 ° (typ.)
Right >75 ° (typ.)
• Response time <=45ms (typ.)
* These information are subject to change without notice.
RETURN TO TOP OF THE PAGE
Resolution & Preset Modes
• Maximum 1024 x 768 at 75Hz
150P2E/150P2D Product Information
file:///D|/Grace/150P2/english/150p2e/product/product.htm (2 of 8) [9/5/2001 11:06:13 AM]
• Recommended 1024 x 768 at 60Hz
14 user definable modes
14 factory preset modes:
H. freq (KHz) Resolution V. freq (KHz)
31.469 640*350 70.086
31.469 720*400 70.087
31.469 640*480 59.940
35.000 640*480 67.000
37.861 640*480 72.809
37.500 640*480 75.000
35.156 800*600 56.250
37.879 800*600 60.317
48.077 800*600 72.188
46.875 800*600 75.000
49.700 832*624 75.000
48.363 1024*768 60.004
56.476 1024*768 70.069
60.023 1024*768 75.029
RETURN TO TOP OF THE PAGE
Automatic Power Saving
If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can
automatically reduce its power consumption when not in use. And if an input from a keyboard, mouse or
other input device is detected, the monitor will automatically "wake up". The following table shows the
power consumption and signaling of this automatic power saving features:
Power Management Definition
VESA Mode Video H-sync V-sync Power Used LED color
ON Active Yes Yes < 23W Green
150P2E/150P2D Product Information
file:///D|/Grace/150P2/english/150p2e/product/product.htm (3 of 8) [9/5/2001 11:06:13 AM]
Stand-by Blanked No Yes < 3W Amber
Suspend Blanked Yes No < 3W Amber
OFF Blanked No No < 3W Amber
This monitor is ENERGY STAR
®
compliant. As an ENERGY STAR
®
Partner, PHILIPS has
determined that this product meets the
ENERGY STAR
®
guidelines for energy efficiency.
RETURN TO TOP OF THE PAGE
Physical Specifications
• Dimension (WxHxD) 380 x 360 x 165 mm (incl. Pedestal)
• Weight 5.4 Kg
• Swivel + - 175°
• Height adjustment range 50mm
• Portrait display 90° rotation counter clockwise
• Tilt (Forward / Backward) - 5° / 25°
• Power supply 100 — 240 VAC, 50/60 Hz
• Power consumption 23 W (typ.)
• Temperature (operating) 5° C to 35° C
• Relative humidity 20% to 80%
• System MTBF 50K hrs (CCFL 40Khrs)
• Cabinet color
150P2E: Light Gray
150P2D: Black
* These information are subject to change without notice.
RETURN TO TOP OF THE PAGE
Pin Assignment
1. The digital only connector contains 24 signal contacts organized in three rows of eight contacts. Signal
pin assignments are listed in the table:
150P2E/150P2D Product Information
file:///D|/Grace/150P2/english/150p2e/product/product.htm (4 of 8) [9/5/2001 11:06:13 AM]
Pin
No.
Signal Assignment
Pin
No.
Signal Assignment
Pin
No.
Signal Assignment
1 T.M.D.S. Data2- 9 T.M.D.S. Data1- 17 T.M.D.S. Data0-
2 T.M.D.S. Data2+ 10 T.M.D.S. Data1+ 18 T.M.D.S. Data0+
3
T.M.D.S. Data2/4
Shield
11
T.M.D.S. Data1/3
Shield
19
T.M.D.S. Data0/5
Shield
4 No connect 12 No connect 20 No connect
5 No connect 13 No connect 21 No connect
6 DDC Clock 14 +5V Power 22
T.M.D.S. Clock
Shield
7 DDC Data 15 Ground (for +5V) 23 T.M.D.S. Clock+
8 No connect 16 Hot Plug Detect 24 T.M.D.S. Clock-
2. The 15-pin D-sub connector (male) of the signal cable:
Pin
No.
Assignment
Pin
No.
Assignment
1 Red video input 9 DDC +5V
2 Green video input 10 Logic ground
3 Blue video input 11
Identical output - connected
to pin 10
4
Identical output - connected
to pin 10
12 Serial data line (SDA)
5 Cable detect 13 H. Sync / H+V
6 Red video ground 14 V. Sync
7 Green video ground 15 Data clock line (SCL)
8 Blue video ground
150P2E/150P2D Product Information
file:///D|/Grace/150P2/english/150p2e/product/product.htm (5 of 8) [9/5/2001 11:06:13 AM]
RETURN TO TOP OF THE PAGE
Product Views
Follow the links to see various views of the monitor and its components.
Front View Product Description
RETURN TO TOP OF THE PAGE
Physical Function
1) Tilt
2) Swivel
150P2E/150P2D Product Information
file:///D|/Grace/150P2/english/150p2e/product/product.htm (6 of 8) [9/5/2001 11:06:13 AM]
3) Height adjustment
4) Portrait display
Turn monitor from landscape view to portrait view
4.1) Tilt the monitor body at an angle
4.2) Rotate the monitor body 90 degrees counter clockwise.
150P2E/150P2D Product Information
file:///D|/Grace/150P2/english/150p2e/product/product.htm (7 of 8) [9/5/2001 11:06:13 AM]
RETURN TO TOP OF THE PAGE
150P2E/150P2D Product Information
file:///D|/Grace/150P2/english/150p2e/product/product.htm (8 of 8) [9/5/2001 11:06:13 AM]

Installing your LCD Monitor

Your LCD Monitor : Front View Product DescriptionConnecting to Your PCRemove and
Re-install the BaseGetting Started Optimizing PerformanceAccessories (optional)
Front View Product Description
UP and DOWN buttons are used when adjusting the OSD of your monitor
LEFT and RIGHT buttons, like the UP and DOWN buttons, are also used
in adjusting the OSD of your monitor.
BRIGHTNESS hotkey. When the UP and DOWN arrow buttons are
pressed, the adjustment controls for the BRIGHTNESS will show up.
OK button which when pressed will take you to the OSD controls
Installing your LCD Monitor
file:///D|/Grace/150P2/english/150p2e/install/install.htm (1 of 2) [9/5/2001 11:06:16 AM]
POWER button switches your monitor on
Automatically adjust the horizontal position, vertical position, phase and
clock setting.
RETURN TO TOP OF THE PAGE
Optimizing Performance
For best performance, ensure that your display settings are set at 1024x768@60Hz (for14"/15") or
1280x1024, 60Hz (for17"/18").
Note: You can check the current display settings by pressing the "OK" button once.
Go into the Product Information. The current display mode is shown on the item
called RESOLUTION.
You can also install the Flat Panel Adjust (FP Adjust) program, a program for getting the best
performance out of your monitor, included in this CD. A step-by-step instructions is provided to guide
you through the installtion process. Click on the link to know more about this program.
More about
FP_setup01.exe
RETURN TO TOP OF THE PAGE
Installing your LCD Monitor
file:///D|/Grace/150P2/english/150p2e/install/install.htm (2 of 2) [9/5/2001 11:06:16 AM]

On-Screen Display

Description of the On-Screen DisplayThe OSD Tree
Description of the On Screen Display
What is the On-Screen Display?
This is a feature in all Philips LCD monitors which allows an end-user to adjust screen performance of
monitors directly though an on-screen instruction window. The user interface provides user-friendliness and
ease-of-use when operating the monitor.
Basic and simple instruction on the control keys.
On the front controls of your monitor, once you press the
button, the On Screen Display (OSD) Main
Controls window will pop up and you can now start making adjustments to your monitor's various features.
Use the
or the keys to make your adjustments within.
RETURN TO TOP OF THE PAGE
The OSD Tree
Below is an overall view of the structure of the On-Screen Display. You can use this as reference when you
want to later on work your way around the different adjustments.
Analog signal input:
On-Screen Display
file:///D|/Grace/150P2/english/150p2e/osd/osddesc.htm (1 of 4) [9/5/2001 11:06:19 AM]
On-Screen Display
file:///D|/Grace/150P2/english/150p2e/osd/osddesc.htm (2 of 4) [9/5/2001 11:06:19 AM]
Digital signal input:
RETURN TO TOP OF THE PAGE
On-Screen Display
file:///D|/Grace/150P2/english/150p2e/osd/osddesc.htm (3 of 4) [9/5/2001 11:06:19 AM]
On-Screen Display
file:///D|/Grace/150P2/english/150p2e/osd/osddesc.htm (4 of 4) [9/5/2001 11:06:19 AM]
Customer Care & Warranty
PLEASE SELECT YOUR COUNTRY/AREA TO REVIEW DETAILS OF YOUR WARRANTY
COVERAGE
WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece •
Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden •
Switzerland • Spain • United Kingdom
EASTERN EUROPE: Czech Republic • Hungary • Poland • Russia • Turkey
LATIN AMERICA: Antilles • Argentina • Brasil • Chile • Colombia • Mexico • Paraguay • Peru
• Uruguay • Venezuela
NORTH AMERICA: Canada • USA
PACIFIC: Australia • New Zealand
ASIA: Bangladesh • China • Hong Kong • India • Indonesia • Japan • Korea • Malaysia •
Pakistan • Philippines • Singapore • Taiwan • Thailand
AFRICA: Morocco • South Africa
MIDDLE EAST: Dubai • Egypt

Customer Care and Warranty

file:///D|/Grace/150P2/english/warranty/warranty.htm [9/5/2001 11:06:21 AM]

Glossary

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
C
Color temperature
A way of describing the color of a radiating source in terms of the temperature (in degrees Kelvin) of a black
body radiating with the same dominant frequency as the source.
Most Philips monitors offer the possibility of setting the color temperature to any desired value.
RETURN TO TOP OF THE PAGE
D
D-SUB USB
Your monitor comes with a D-Sub cable.
Digital Visual Interface (DVI)
The Digital Visual Interface (DVI) specification provides a high-speed digital connection for visual data types
that is display technology independent. The interface is primarily focused at providing a connection between
a computer and its display device. The DVI specification meets the needs of all segments of the PC industry
(workstation, desktop, laptop, etc.) and will enable these different segments to unite around one monitor
interface specification.
The DVI interface enables:
Content to remain in the lossless digital domain from creation to consumption.1.
Display technology independence.2.
Plug and play through hot plug detection, EDID and DDC2B.3.
Digital and Analog support in a single connector.4.
RETURN TO TOP OF THE PAGE
Glossary
file:///D|/Grace/150P2/english/150p2e/glossary/glossary.htm (1 of 4) [9/5/2001 11:06:25 AM]
E
Energy Star Computers Programme
An energy conservation programme launched by the US Environmental Protection Agency (EPA) with the
primary aim of promoting the manufacture and marketing of energy-efficient office automation equipment.
Companies joining this programme must be willing to commit themselves to manufacturing one or more
products capable of going into a low -power state (< 30 W) either after a period of inactivity or after a
predetermined time selected by the user.
RETURN TO TOP OF THE PAGE
L
LCD Liquid Crystal Display
An alphanumeric display using the unique properties of liquid crystal to form characters. The latest flat-panel
displays comprise a matrix of hundreds or thousands of individual LCD cells that generate text and colorful
graphics on a screen. They consume little power though they do require external lighting to make them
legible to the user.
RETURN TO TOP OF THE PAGE
U
USB or Universal Serial Bus
A smart plug for PC peripherals. USB automatically determines resources (like driver software and bus
bandwidth) required by peripherals. USB makes necessary resources available without user intervention.
USB eliminates "case angst" -- the fear of removing the computer case to install add-on peripherals.
And USB also eliminates adjustment of complicated IRQ settings when installing new peripherals.
USB does away with "port gridlock." Without USB, PCs are normally limited to one printer, two Com
port devices (usually a mouse and modem), one Enhanced Parallel Port add-on (scanner or video
camera, for example) and a joystick. More and more peripherals for multimedia computers arrive on
the market every day. With USB, up to 127 devices can run simultaneously on a computer.
USB permits "hot plug-in." There's no need to shut down, plug in, reboot and run set-up to install
peripherals. And no need to go through the reverse process to unplug a device.
In short, USB transforms today's "Plug-and-Pray" into true Plug-and-Play!
Hub
Glossary
file:///D|/Grace/150P2/english/150p2e/glossary/glossary.htm (2 of 4) [9/5/2001 11:06:25 AM]
A Universal Serial Bus device that provides additional connections to the Universal Serial Bus.
Hubs are a key element in the plug-and-play architecture of USB. The Figure shows a typical hub. Hubs
serve to simplify USB connectivity from the user's perspective and provide robustness at low cost and
complexity.
Hubs are wiring concentrators and enable the multiple attachment characteristics of USB. Attachment points
are referred to as ports. Each hub converts a single attachment point into multiple attachment points. The
architecture supports concatenation of multiple hubs.
The upstream port of a hub connects the hub towards the host. Each of the other downstream ports of a
hub allows connection to another hub or function. Hubs can detect, attach and detach at each downstream
port and enable the distribution of power to downstream devices. Each downstream port can be individually
enabled and configured at either full or low speed. The hub isolates low speed ports from full speed
signaling.
A hub consists of two portions: the Hub Controller and Hub Repeater. The repeater is a protocol-controlled
switch between the upstream port and downstream ports. It also has hardware support for reset and
suspend/resume signaling. The controller provides the interface registers to allow communication to/from
the host. Hub specific status and control commands permit the host to configure a hub and to monitor and
control its ports.
Device
A logical or physical entity that performs a function. The actual entity described depends on the context of
the reference. At the lowest level, device may refer to a single hardware component, as in a memory device.
At a higher level, it may refer to a collection of hardware components that perform a particular function, such
as a Universal Serial Bus interface device. At an even higher level, device may refer to the function
performed by an entity attached to the Universal Serial Bus; for example, a data/FAX modem device.
Devices may be physical, electrical, addressable, and logical.
Downstream
The direction of data flow from the host or away from the host. A downstream port is the port on a hub
electrically farthest from the host that generates downstream data traffic from the hub. Downstream ports
receive upstream data traffic.
Glossary
file:///D|/Grace/150P2/english/150p2e/glossary/glossary.htm (3 of 4) [9/5/2001 11:06:25 AM]
Upstream
The direction of data flow towards the host. An upstream port is the port on a device electrically closest to
the host that generates upstream data traffic from the hub. Upstream ports receive downstream data traffic.
RETURN TO TOP OF THE PAGE
V
Vertical refresh rate
Expressed in Hz, it is the number of frames (complete pictures) written to the screen every second.
RETURN TO TOP OF THE PAGE
Glossary
file:///D|/Grace/150P2/english/150p2e/glossary/glossary.htm (4 of 4) [9/5/2001 11:06:25 AM]

Download and Print

Installing your LCD monitor driverDownload and Printing InstructionsInstalling FPadjust
Program
Installing Your LCD monitor driver
System requirements:
PC running Windows 95, Windows 98, Windows 2000 , Windows Me, Windows XP or later
Find your driver ".inf/.icm/.cat" at : /PC/drivers/
Read the "Driver_install02.txt" file before installing.
This page provides an option to read the manual in .pdf format. PDF files can be downloaded into your hard
disk, then viewed and printed with Acrobat Reader or through your browser.
If you do not have Adobe¨ Acrobat Reader installed, click on the link to install the application. Adobe®
Acrobat Reader for PC / Adobe® Acrobat Reader for Mac.
Download instructions:
To download the file:
1. Click-and-hold your mouse over the icon below. (Win95/98/2000/Me/XP users right-click)
Download
170B2B.pdf
Download
150P2E.pdf
Download
150P2D.pdf
Download
150P2M.pdf
Download
150P2G.pdf
Download and Print
file:///D|/Grace/150P2/english/download/download.htm (1 of 3) [9/5/2001 11:06:28 AM]
Download
150B2B.pdf
2. From the menu that appears, choose 'Save Link As...', 'Save Target As...' or 'Download Link to Disk'.
3. Choose where you would like to save the file; click 'Save' (if prompted to save as either 'text' or 'source',
choose 'source').
Printing instructions:
To print the manual:
1. With the manual file open, follow your printer's instructions and print the pages you need.
RETURN TO TOP OF THE PAGE
Installing FPadjust Program
The FP Adjust program generates alignment patterns which will help you adjust monitor settings such as
CONTRAST, BRIGHTNESS, HORIZONTAL & VERTICAL POSITION, PHASE and CLOCK.
System requirements:
PC running Windows 95, Windows 98, Windows 2000, Winodws Me, Windows XP or later
To install FPadjust Program:
Click on the link or icon to install FPadjustment Program.
or
Click-and-hold your mouse over the icon. (Win95/98/2000/Me/XP users right-click)
Download
FP_setup01.exe
From the menu that appears, choose 'Save Link As...', 'Save Target As...' or 'Download Link to Disk'.
Choose where you would like to save the file; click 'Save' (if prompted to save as either 'text' or
'source', choose 'source').
Exit your browser and install the FPadjust Program.
Read the "FP_Readme01.txt" file before installing.
RETURN TO TOP OF THE PAGE
Download and Print
file:///D|/Grace/150P2/english/download/download.htm (2 of 3) [9/5/2001 11:06:28 AM]
Loading...
+ 60 hidden pages