Pelco WLV500-1, WLV500-4, WLV500TX, WLVAN-3L, WLVAN-3R User Manual

...
0 (0)
Pelco WLV500-1, WLV500-4, WLV500TX, WLVAN-3L, WLVAN-3R User Manual

INSTALLATION/OPERATION MANUAL WLV500 SERIES WIRELESS VIDEO TRANSMISSION SYSTEMS

1.0 SCOPE

The information contained within this manual covers the installation and operation of the PELCO WLV500 Series wireless control link system.

Installation should be in accordance with FCC regulations and all applicable local and national electric codes, utilizing approved materials only.

Please thoroughly familiarize yourself with the information in this manual prior to installation and operation.

2.0 DESCRIPTION

PELCO's WLV500 Series wireless control link system is designed to provide wireless remote control of camera positioning and zoom functions. The system is compatible with coaxitron remote control systems such as a PELCO Coaxitron System 2000 and operates in conjunction with the WLV1000 wireless video system.

2.1 WLV500 SYSTEM COMPONENTS

1

WLV500TX Transmitter

1WLV500RX Receiver

215 volt AC/DC converters

1

Set mounting hardware kit

®

2.2 MODELS

WLV500-1

Channel 1

WLV500-2

Channel 2

WLV500-3

Channel 3

WLV500-4

Channel 4

Transmitter (WLV500TX)

Receiver (WLV500RX)

Power Supplies (TRFDP15VDC-500M)

Mounting Hardware (WLVHRDWRKIT)

2.3 ANTENNA OPTIONS

WLVAN-2R Medium Gain CP Patch (RH), 6 dB WLVAN-2L Medium Gain CP Patch (LH), 6 dB WLVAN-3R High Gain CP Panel (RH), 13 dB WLVAN-3L High Gain CP Panel (LH), 13 dB

3.0 SYSTEM SPECIFICATIONS

Data

Format:

NRZ

Pulse Width:

1V p-p

Duty Cycle:

50%

Levels

(Video Compatible): 0.0 to 0.7 V Impedance 75 ohms Connectors BNC

Pelco Manual C901M – 1/94

1

RF

Transmitter

 

Radiated Power:

FCC Part 15 (15.249)

Transmit Antenna:

Attached circular polarized

 

patch

Receive Connector:

TNC

Receive Input

 

Impedance:

50 ohms

Frequency

 

Operating Range:

2400 to 2483 MHz

System Frequency

 

Options:

(Factory Set)

WLV500KT-1

2401 MHz

WLV500KT-2

2428 MHz

WLV500KT-3

2455 MHz

WLV500KT-4

2482 MHz

Frequency Stability:

±0.005%

Modulation:

Wideband FM

Operating

 

Distance:

1,000 feet maximum line-of-

 

sight

 

(Consult factory for extended

 

operating range)

Power (Each Unit)

Input Voltage:

12 to 16 VDC

Input Current:

<350 mA

 

Terminal/Barrier Strip

 

Reverse Polarity Protection

Mechanical

 

Weight (Each Unit):

<16 oz.

Dimensions:

(D x W x H Inches)

Transmitter

(w/Antenna)

 

5.00 x 3.50 x 1.80

Receiver

(w/o Antenna)

 

5.60 x 3.50 x 1.30

Case Finish

Cover:

Black paint

Base:

Alodine aluminum

Environmental

Operating

 

Temperature:

-20° to 65° C

Storage

 

Temperature:

-50° to 85° C

Humidity

 

(Non-condensing):

90%

4.0INSTALLATION

4.1VIDEO AND POWER CONNECTIONS

The following instructions are for use with the PELCO Coaxitron System 2000.

1.Refer to Figure 1. The output port labeled “INPUT FROM RECEIVER” of the Coaxitron System 2000 transmitter should be connected to the BNC connector indicated on the label as “DATA IN/VIDEO OUT” of the WLV500TX control link transmitter. The video signal that originated from the WLV1000RX wireless video receiver (or directly from a camera or other video source) should be connected to the BNC connector labeled “VIDEO IN” of the WLV500TX. The port labeled “OUTPUT TO MONITOR” of the Coaxitron System 2000 transmitter should be connected to a video monitor.

2.The port labeled “OUT” of the Coaxitron System 2000 receiver should be connected to the BNC connector labeled “DATA OUT” of the WLV500RX control link receiver.

3.The wall mounted power supplies (15 VDC) included in the system should be connected to the power strips of each unit labeled 11-16 V”. The striped lead with a red connector should be connected to the positive “+” terminal and the ground lead with the black connector should be connected to the negative “–” terminal. The power supplies should then be plugged into a 120 volt (AC) power outlet.

2

Pelco Manual C901M - 1/94

Loading...
+ 4 hidden pages