Pelco IME329-1RS, IME329-1RS-US, IME329-1IS-US, IME329-1IS, IME329-1ES-US User Manual

Next Gen Sarix®

Enhanced

IME Series

Mini Dome Cameras

Installation Manual

C1338M 7/17

1

Contents
Important Notices.................................................................................................................................................	3
Legal Notice.........................................................................................................................................................	3
Regulatory Notices ..............................................................................................................................................	3
Korean Class A EMC ...........................................................................................................................................	3
Warranty Statement .............................................................................................................................................	3
Introduction ..........................................................................................................................................................	4
Models .................................................................................................................................................................	5
Recommended Mounts........................................................................................................................................	5
Optional Accessories ...........................................................................................................................................	5
Getting Started.....................................................................................................................................................	6
Surface Mount Models.........................................................................................................................................	7
Supplied Parts List...............................................................................................................................................	7
User-Supplied Parts List ......................................................................................................................................	7
Product Overview ................................................................................................................................................	8
Installation............................................................................................................................................................	9
Installing the Mount..............................................................................................................................................	9
In-Ceiling: Indoor and Environmental ..................................................................................................................	9
Pendant: Indoor and Environmental ..................................................................................................................	12
Surface Mount: Indoor and Environmental ........................................................................................................	15
Wall Mount: Indoor.............................................................................................................................................	17
Cable Terminations ............................................................................................................................................	22
Ethernet Wiring Requirement for PoE ...............................................................................................................	22
Alarm/Relay/Audio Port .....................................................................................................................................	23
IP Address Settings ...........................................................................................................................................	24
Logging On to the Camera ................................................................................................................................	24

2

Important Notices

For more information about Pelco’s product-specific important notices and thereto related information, refer to www.pelco.com/legal.

Regulatory Notices

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Radio and Television Interference

This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Changes and modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission’s rules.

CAN ICES-3(A)/NMB-3(A).

Korean Class A EMC

Warranty Statement

For information about Pelco’s product warranty and thereto related information, refer to www.pelco.com/ warranty.

UL Safety Notices

This product is intended to be supplied by a Listed Power Unit marked “L.P.S.” (or “Limited Power Source”) and rate output 24Vac, 50/60Hz, 1.28 minimum or 48 Vdc, 0.35A minimum.

The product shall be installed by a qualified service person and the installation shall conform to local codes.

3

Introduction

The NextGen Sarix® IME Series IP cameras feature SureVision technology that seamlessly delivers advanced low-light performance with wide dynamic range (WDR) and anti-bloom technologies that operate simultaneously. They are part of Pelco’s Enhanced (E) range of cameras, providing industryleading image quality and performance.

The IME Series mini dome camera is easy to install, offers flexible mounting options, and uses a standard Web browser for easy remote setup and administration.

The IME Series easily connects to Pelco IP and hybrid systems such as VideoXpert™, Endura® version 2.0 (or later), and Digital Sentry® version 7.3 (or later). The camera is also conformant with ONVIF Profile S and Profile G for connection with third-party software. Pelco offers an application programming interface (API) and software developer’s kit (SDK) for interfacing with Pelco’s IP cameras.

This document describes the installation and initial setup procedures to begin operating the camera. For more information about operating your camera, refer to the operation manual specific to the product.

NOTE: For additional information about product documentation in English and other languages, go to www.pelco.com/sarix and navigate to the IME Series Web page

4

Models

IME129-1IS IME229-1IS IME329-1IS IME129-1ES IME229-1ES IME329-1ES IME129-1RS IME229-1RS IME329-1RS

Indoor, 3 ~ 9 mm focal range, surface mount, 1MPx, white Indoor, 3 ~ 9 mm focal range, surface mount, 2MPx, white Indoor, 3 ~ 9 mm focal range, surface mount, 3MPx, white

Environmental, 3 ~ 9 mm focal range, surface mount, 1MPx, light gray Environmental, 3 ~ 9 mm focal range, surface mount, 2MPx, light gray Environmental, 3 ~ 9 mm focal range, surface mount, 3MPx, light gray Environmental, 3 ~ 9 mm focal range, surface mount, 1MPx, light gray, IR LED Environmental, 3 ~ 9 mm focal range, surface mount, 2MPx, light gray, IR LED Environmental, 3 ~ 9 mm focal range, surface mount, 3MPx, light gray, IR LED

Recommended Mounts

WMVE-SR	Pendant mount arm, 1.5in., NPT, environmental, light gray
WMVE-SW	Pendant mount arm, 1.5in., NPT, indoor, white
IMEICM-E	Environmental in-ceiling mount, light gray
IMEICM-I	Indoor in-ceiling mount, white
IMEPMB-I	Wall mount bracket, light duty, indoor, white
Optional Accessories
PA101	Pole adapter for use with WMVE-SR wall mount
IMEPM-E	1.5-inch NPT environmental pendant adapter, light gray
IMEPM-I	1.5-inch NPT indoor pendant adapter, white
IMEEBAP-E	Environmental 4S electrical box and Type 4X adapter
IMEEBAP-I	Indoor 4S electrical box adapter

•Contact Pelco Product Support for more information about the use of the Pelco IP camera tester with cameras

5

Getting Started

Before installing your device, thoroughly familiarize yourself with the information in the installation section of this manual.

NOTES:

•Pelco recommends connecting the device to a network that uses a Dynamic Host Configuration Protocol (DHCP) server to address devices.

•Do not use a network hub when configuring the network settings for the device.

•To ensure secure access, place the device behind a firewall when it is connected to a network. To ensure secure access, place the device behind a firewall when it is connected to a network.

6

Surface Mount Models

Supplied Parts List

Qty	Description
1	Camera
1	IME Series Mini Dome IP Camera Installation manual
1	Important Safety Instructions
1	Resource sheet

1 RoHS 10 (China only)

1Power adapter plug (optional)

2Plastic expansion anchors

3M4 x 25 mm self-tapping screws

1 Torx T20 security bit (Outdoor Cameras Only)

1 Mounting plate (Type 4x)

4 8-32x.5 C-sink (check fit to plate)

2 6-32x.5 C-sink (check fit to plate) 2 M4x.7 x 6 mm screws (Europe)

User-Supplied Parts List

Qty Description

1 Conduit (if applicable)

1 Conduit adapters (if applicable)

1 RJ-45 connector to terminate wires

1 Cat5 (or higher) cable

1 #2 Philips screwdriver

1Tool for drilling

2Driver ¼” hex for security bit

1 Audio cable (optional)

1 Alarm cable (optional)

1SD card, up to a 128 GB SanDisk Extreme® PLUS SDHC™ UHS-I MicroSD card, or with adapter to standard SD card size.

7

Product Overview

(1)RJ-45 Network Port: Connects the camera to the IP network. Also supplies power to the camera (PoE), through the same connector.

I.To purchase power adaptor, please contact Pelco for further information.

(2)BNC Connector: Not in use.

(3)Power Connector: A two-pin connector for 12VDC and 24VAC. To wire the power connector, remove the green power male adaptor that comes already inserted into the camera. Attach the wires per the diagram above (e.g. Pin 1 is 12VDC or 24VAC 1; Pin 2 is GND or 24VAC 2.) with a small slotted screwdriver and then plug the adaptor plug back into the camera. Do not connect 12VDC or 24VAC power if you are using PoE (Power over Ethernet). Dual power connection can overheat the camera.

(4)RS-485: A three-pin connector for RS-485 connection. Pin 1 is D+; pin 2 is D-; pin 3 is GND.

(5)Reset Button: Reboots the camera or restores the camera’s factory default settings. This button is recessed. Using a small tool, such as a paper clip, press and release the reset button once to reboot the camera. Press and hold the reset button for 10 seconds to restore the camera to the factory default settings.

(6)Alarm/Relay/Audio Port: Connects to alarms, relays, and audio in/out.

(7)SD Card: Install the SD card into the card slot to store videos and snapshots. Do not remove the SD card when the camera is powered on. With regards to SD card installation, please note information listed below:

I.The SD card slot is located at the base of the camera module. To install the SD card, dome cover must be taken off from the camera. Take off the camera module and put SD card into SD card slot.

II.This camera supports a Micro SD card, in SD card adaptor.

8