®
3500 Pelco Way
Clovis, CA 93612-5699
USA
In North America & Canada:
Tel (800) 289-9100
FAX (800) 289-9150
International Customers:
Tel +1(559) 292-1981
FAX +1(559) 348-1120
www.pelco.com
C2430M (3/01)
LD5HD Series
Lower Dome for Heavy-Duty Spectra™ Dome Systems
DESCRIPTION
The LD5HD Series Lower Domes for the Heavy-Duty Spectra feature a thick acrylic bubble, barrel locks, and a trim ring with all-aluminum construction. Models are available with a protective cage. The cage is designed to increase the protection of the unit’s bubble with minimal obstruction of the viewed scene. The camera automatically focuses through the cage’s bars at medium to high zoom setting, eliminating interference.
Models
LD5HDF-1 |
Lower dome for BB5HDF-1, Heavy-Duty Spectra back box |
LD5HDCF-1 |
Caged lower dome for BB5HDF-1, Heavy-Duty Spectra back box |
LD5HDPG-1 |
Lower dome for BB5HD-PG-1, Heavy-Duty Spectra back box |
LD5HDCPG-1 |
Caged lower dome for BB5HD-PG-1, Heavy-Duty Spectra back box |
LD5HDPG-E1 |
Lower dome for BB5HD-PG-E1, Heavy-Duty Spectra back box |
LD5HDCPG-E1 |
Caged lower dome for BB5HD-PG-E1, Heavy-Duty Spectra back box |
INSTALLATION
The following parts are supplied:
PENDANT MODELS |
IN-CEILING MODELS |
||
1 |
Acrylic lower dome with trim ring |
1 |
Acrylic lower dome with trim ring |
1 |
Parts bag |
2 |
Cam lock keys |
|
1 O-ring |
|
|
1Tube o-ring lubricant
2Pop-up lock keys
Pendant Models
Refer to Figure 1.
1.Lightly apply O-ring lubricant to the O-ring. Install the O-ring in the groove on the trim ring of the lower dome.
2.Attach the back box trim leash to a retainer screw inside the lower dome.
3.Environmental Models Only – Plug the twopin heater connection in the lower dome into the mating connector in the back box.
4.Align barrel locks in lower dome with the holes located on each side of the back box. Push the lower dome onto the back box. Press the center pins of the barrel locks in to secure the lower dome.
In-Ceiling Models
HEATER
CONNECTORS
BARREL LOCK
TRIM
LEASH
O-RING
CENTER
PIN
00496
Figure 1. Lower Dome Installation,
Pendant Models
Refer to Figure 2.
1.Attach the back box trim leash to one of the 8-32 x .275-inch screws that secure the back box to the mounting ring.
2.Insert both keys in the barrel locks. Turn keys clockwise to the unlocked position. Keys can not be removed from lock in the unlocked position.
3.Align ball studs (located on the mount ring) with the ball stud receivers (located on the inside of the lower dome).
4.Place the lower dome over the back box. Hold and turn both keys to the locked position.
BALL STUD
BALL STUD
RECEIVER
TRIM LEASH
BARREL
KEY LOCK
00497
Figure 2. Lower Dome Installation,
In-Ceiling Models
Loading...